xref: /titanic_41/usr/src/uts/common/io/usb/usba/usbai.c (revision bb25c06cca41ca78e5fb87fbb8e81d55beb18c95)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License, Version 1.0 only
6  * (the "License").  You may not use this file except in compliance
7  * with the License.
8  *
9  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10  * or http://www.opensolaris.org/os/licensing.
11  * See the License for the specific language governing permissions
12  * and limitations under the License.
13  *
14  * When distributing Covered Code, include this CDDL HEADER in each
15  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16  * If applicable, add the following below this CDDL HEADER, with the
17  * fields enclosed by brackets "[]" replaced with your own identifying
18  * information: Portions Copyright [yyyy] [name of copyright owner]
19  *
20  * CDDL HEADER END
21  *
22  * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #pragma ident	"%Z%%M%	%I%	%E% SMI"
27 
28 /*
29  * USBA: Solaris USB Architecture support
30  *
31  * all functions exposed to client drivers  have prefix usb_ while all USBA
32  * internal functions or functions exposed to HCD or hubd only have prefix
33  * usba_
34  *
35  * this file contains initializations, logging/tracing support and PM
36  * support
37  */
38 #define	USBA_FRAMEWORK
39 #include <sys/varargs.h>
40 #include <sys/usb/usba/usba_impl.h>
41 #include <sys/usb/usba/hcdi_impl.h>
42 #include <sys/usb/usba/usba10.h>
43 
44 /*
45  * print buffer protected by mutex for debug stuff. the mutex also
46  * ensures serializing debug messages
47  */
48 static kmutex_t	usba_print_mutex;
49 static char usba_print_buf[USBA_PRINT_BUF_LEN];
50 kmutex_t usbai_mutex;
51 
52 /*
53  * debug stuff
54  */
55 usb_log_handle_t	usbai_log_handle;
56 uint_t			usbai_errlevel = USB_LOG_L4;
57 uint_t			usbai_errmask = (uint_t)-1;
58 
59 #define	USBA_DEBUG_SIZE_EXTRA_ALLOC	8
60 #ifdef	DEBUG
61 #define	USBA_DEBUG_BUF_SIZE \
62 			(0x40000 -  USBA_DEBUG_SIZE_EXTRA_ALLOC)
63 #else
64 #define	USBA_DEBUG_BUF_SIZE \
65 			(0x4000 -  USBA_DEBUG_SIZE_EXTRA_ALLOC)
66 #endif	/* DEBUG */
67 
68 #define	USBA_POWER_STR_SIZE		40
69 
70 int	usba_suppress_dprintf;		/* Suppress debug printing */
71 int	usba_clear_debug_buf_flag;	/* clear debug buf */
72 int	usba_buffer_dprintf = 1;	/* Use a debug print buffer */
73 int	usba_timestamp_dprintf = 0;	/* get time stamps in trace */
74 int	usba_debug_buf_size = USBA_DEBUG_BUF_SIZE;	/* Size of debug buf */
75 int	usba_debug_chatty;		/* L1 msg on console */
76 
77 static char *usba_debug_buf = NULL;	/* The debug buf */
78 static char *usba_buf_sptr, *usba_buf_eptr;
79 static hrtime_t usba_last_timestamp;	/* last time stamp in trace */
80 
81 /*
82  * Set to 1 to enable PM.
83  */
84 int usb_force_enable_pm = 0;
85 
86 
87 /* USBA framework initializations */
88 void
89 usba_usbai_initialization()
90 {
91 	usbai_log_handle = usb_alloc_log_hdl(NULL, "usbai", &usbai_errlevel,
92 				&usbai_errmask, NULL, 0);
93 
94 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
95 	    "usba_usbai_initialization");
96 
97 	mutex_init(&usba_print_mutex, NULL, MUTEX_DRIVER, NULL);
98 	mutex_init(&usbai_mutex, NULL, MUTEX_DRIVER, NULL);
99 }
100 
101 
102 /* USBA framework destroys */
103 void
104 usba_usbai_destroy()
105 {
106 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
107 	    "usba_usbai_destroy");
108 
109 	mutex_destroy(&usba_print_mutex);
110 	mutex_destroy(&usbai_mutex);
111 	if (usba_debug_buf) {
112 		kmem_free(usba_debug_buf,
113 		    usba_debug_buf_size + USBA_DEBUG_SIZE_EXTRA_ALLOC);
114 	}
115 
116 	usb_free_log_hdl(usbai_log_handle);
117 }
118 
119 
120 /*
121  * debug, log, and console message handling
122  */
123 usb_log_handle_t
124 usb_alloc_log_hdl(dev_info_t *dip, char *name,
125 	uint_t *errlevel, uint_t *mask, uint_t *instance_filter,
126 	usb_flags_t flags)
127 {
128 	usba_log_handle_impl_t	*hdl;
129 
130 	USBA_CHECK_CONTEXT();
131 	hdl = kmem_zalloc(sizeof (*hdl), KM_SLEEP);
132 
133 	hdl->lh_dip = dip;
134 	if (dip && (name == NULL)) {
135 		hdl->lh_name = (char *)ddi_driver_name(dip);
136 	} else {
137 		hdl->lh_name = name;
138 	}
139 	hdl->lh_errlevel = errlevel;
140 	hdl->lh_mask = mask;
141 	hdl->lh_instance_filter = instance_filter;
142 	hdl->lh_flags = flags;
143 
144 #ifdef __lock_lint
145 	(void) usb_alloc_log_handle(dip, name, errlevel, mask,
146 	    instance_filter, 0, flags);
147 	usb_free_log_handle(NULL);
148 #endif
149 
150 	return ((usb_log_handle_t)hdl);
151 }
152 
153 
154 /*ARGSUSED*/
155 usb_log_handle_t
156 usb_alloc_log_handle(dev_info_t *dip, char *name,
157 	uint_t *errlevel, uint_t *mask, uint_t *instance_filter,
158 	uint_t reserved, usb_flags_t flags)
159 {
160 	return (usb_alloc_log_hdl(dip, name, errlevel, mask,
161 	    instance_filter, flags));
162 }
163 
164 void
165 usb_free_log_handle(usb_log_handle_t handle)
166 {
167 	if (handle) {
168 		kmem_free(handle, sizeof (usba_log_handle_impl_t));
169 	}
170 }
171 
172 void
173 usb_free_log_hdl(usb_log_handle_t handle)
174 {
175 	if (handle) {
176 		kmem_free(handle, sizeof (usba_log_handle_impl_t));
177 	}
178 }
179 
180 
181 static void
182 usba_clear_dprint_buf()
183 {
184 	if (usba_debug_buf) {
185 		usba_buf_sptr = usba_debug_buf;
186 		usba_buf_eptr = usba_debug_buf + usba_debug_buf_size;
187 		bzero(usba_debug_buf, usba_debug_buf_size +
188 					USBA_DEBUG_SIZE_EXTRA_ALLOC);
189 	}
190 }
191 
192 
193 #ifdef DEBUG
194 char *
195 usba_dbuf_tail(uint_t lines)
196 {
197 	int	count;
198 	char	*r = NULL;
199 
200 	mutex_enter(&usba_print_mutex);
201 	if (usba_debug_buf) {
202 		count = 0;
203 		r = usba_buf_sptr;
204 		while ((count < lines) && (r > usba_debug_buf)) {
205 			if (*r == '\n') {
206 				count++;
207 			}
208 			r--;
209 		}
210 	}
211 	mutex_exit(&usba_print_mutex);
212 
213 	return (r);
214 }
215 #endif	/* DEBUG */
216 
217 
218 static void usb_vprintf(dev_info_t *, int, char *, char *, va_list)
219 	__KVPRINTFLIKE(4);
220 
221 static void
222 usb_vprintf(dev_info_t *dip, int level, char *label, char *fmt, va_list ap)
223 {
224 	size_t len;
225 	int instance;
226 	char driver_name[USBA_DRVNAME_LEN];
227 	char *msg_ptr;
228 
229 	if (usba_suppress_dprintf) {
230 
231 		return;
232 	}
233 
234 	*driver_name = '\0';
235 	mutex_enter(&usba_print_mutex);
236 
237 	/*
238 	 * Check if we have a valid buf size?
239 	 * Suppress logging to usb_buffer if so.
240 	 */
241 	if (usba_debug_buf_size <= 0) {
242 
243 		usba_buffer_dprintf = 0;
244 	}
245 
246 	/*
247 	 * if there is label and dip, use <driver name><instance>:
248 	 * otherwise just use the label
249 	 */
250 	if (dip) {
251 		instance = ddi_get_instance(dip);
252 		(void) snprintf(driver_name, USBA_DRVNAME_LEN,
253 		    "%s%d", ddi_driver_name(dip), instance);
254 	}
255 
256 	if (label == (char *)NULL) {
257 		len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN, "\t");
258 	} else if (usba_timestamp_dprintf) {
259 		hrtime_t t = gethrtime();
260 		hrtime_t elapsed = (t - usba_last_timestamp)/1000;
261 		usba_last_timestamp = t;
262 
263 		if (dip) {
264 
265 			len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
266 			    "+%lld->%p: %s%d: ", elapsed,
267 			    (void *)curthread, label, instance);
268 		} else {
269 			len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
270 			    "+%lld->%p: %s: ", elapsed,
271 			    (void *)curthread, label);
272 		}
273 	} else {
274 		if (dip) {
275 			len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
276 			    "%s%d:\t", label, instance);
277 		} else {
278 			len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
279 			    "%s:\t", label);
280 		}
281 	}
282 
283 
284 	msg_ptr = usba_print_buf + len;
285 	(void) vsnprintf(msg_ptr, USBA_PRINT_BUF_LEN - len - 2, fmt, ap);
286 
287 	len = min(strlen(usba_print_buf), USBA_PRINT_BUF_LEN - 2);
288 	usba_print_buf[len++] = '\n';
289 	usba_print_buf[len] = '\0';
290 
291 	/*
292 	 * stuff the message in the debug buf
293 	 */
294 	if (usba_buffer_dprintf) {
295 		if (usba_debug_buf == NULL) {
296 			usba_debug_buf = kmem_alloc(
297 			    usba_debug_buf_size + USBA_DEBUG_SIZE_EXTRA_ALLOC,
298 			    KM_SLEEP);
299 			usba_clear_dprint_buf();
300 		} else if (usba_clear_debug_buf_flag) {
301 			usba_clear_dprint_buf();
302 			usba_clear_debug_buf_flag = 0;
303 		}
304 
305 		/*
306 		 * overwrite >>>> that might be over the end of the
307 		 * the buffer
308 		 */
309 		*(usba_debug_buf + usba_debug_buf_size) = '\0';
310 
311 		if ((usba_buf_sptr + len) > usba_buf_eptr) {
312 			size_t left = usba_buf_eptr - usba_buf_sptr;
313 
314 			bcopy(usba_print_buf, usba_buf_sptr, left);
315 			bcopy((caddr_t)usba_print_buf + left,
316 				usba_debug_buf, len - left);
317 			usba_buf_sptr = usba_debug_buf + len - left;
318 		} else {
319 			bcopy(usba_print_buf, usba_buf_sptr, len);
320 			usba_buf_sptr += len;
321 		}
322 		/* add marker */
323 		(void) sprintf(usba_buf_sptr, ">>>>");
324 	}
325 
326 	/*
327 	 * L4-L2 message may go to the log buf if not logged in usba_debug_buf
328 	 * L1 messages will go to the log buf in non-debug kernels and
329 	 * to console and log buf in debug kernels if usba_debug_chatty
330 	 * has been set
331 	 * L0 messages are warnings and will go to console and log buf and
332 	 * include the pathname, if available
333 	 */
334 
335 	switch (level) {
336 	case USB_LOG_L4:
337 	case USB_LOG_L3:
338 	case USB_LOG_L2:
339 		if (!usba_buffer_dprintf) {
340 			cmn_err(CE_CONT, "^%s", usba_print_buf);
341 		}
342 		break;
343 	case USB_LOG_L1:
344 		if (dip) {
345 			char *pathname = kmem_alloc(MAXPATHLEN, KM_NOSLEEP);
346 			if (pathname) {
347 				cmn_err(CE_CONT,
348 				    usba_debug_chatty ?
349 				    "%s (%s): %s" : "?%s (%s): %s",
350 				    ddi_pathname(dip, pathname),
351 				    driver_name, msg_ptr);
352 				kmem_free(pathname, MAXPATHLEN);
353 			} else {
354 				cmn_err(CE_CONT,
355 				    usba_debug_chatty ?
356 				    "%s" : "?%s", usba_print_buf);
357 			}
358 		} else {
359 			cmn_err(CE_CONT,
360 			    usba_debug_chatty ? "%s" : "?%s",
361 			    usba_print_buf);
362 		}
363 		break;
364 	case USB_LOG_L0:
365 		/* Strip the "\n" added earlier */
366 		if (usba_print_buf[len - 1] == '\n') {
367 			usba_print_buf[len - 1] = '\0';
368 		}
369 		if (msg_ptr[len - 1] == '\n') {
370 			msg_ptr[len - 1] = '\0';
371 		}
372 		if (dip) {
373 			char *pathname = kmem_alloc(MAXPATHLEN, KM_NOSLEEP);
374 			if (pathname) {
375 				cmn_err(CE_WARN, "%s (%s): %s",
376 				    ddi_pathname(dip, pathname),
377 				    driver_name, msg_ptr);
378 				kmem_free(pathname, MAXPATHLEN);
379 			} else {
380 				cmn_err(CE_WARN, usba_print_buf);
381 			}
382 		} else {
383 			cmn_err(CE_WARN, usba_print_buf);
384 		}
385 		break;
386 	}
387 
388 	mutex_exit(&usba_print_mutex);
389 }
390 
391 int
392 usba_vlog(usb_log_handle_t, uint_t, uint_t, char *, va_list)
393 	__KVPRINTFLIKE(4);
394 
395 /* When usba10_calls.c goes away, this function can be made static again. */
396 int
397 usba_vlog(usb_log_handle_t handle, uint_t level, uint_t mask,
398     char *fmt, va_list ap)
399 {
400 	usba_log_handle_impl_t *hdl = (usba_log_handle_impl_t *)handle;
401 	char *label;
402 	uint_t hdl_errlevel, hdl_mask, hdl_instance_filter;
403 
404 	/* if there is no handle, use usba as label */
405 	if (hdl == NULL) {
406 		usb_vprintf(NULL, level, "usba", fmt, ap);
407 
408 		return (USB_SUCCESS);
409 	}
410 
411 	/* look up the filters and set defaults */
412 	if (hdl->lh_errlevel) {
413 		hdl_errlevel = *(hdl->lh_errlevel);
414 	} else {
415 		hdl_errlevel = 0;
416 	}
417 
418 	if (hdl->lh_mask) {
419 		hdl_mask = *(hdl->lh_mask);
420 	} else {
421 		hdl_mask = (uint_t)-1;
422 	}
423 
424 	if (hdl->lh_instance_filter) {
425 		hdl_instance_filter = *(hdl->lh_instance_filter);
426 	} else {
427 		hdl_instance_filter = (uint_t)-1;
428 	}
429 
430 	/* if threshold is lower or mask doesn't match, we are done */
431 	if ((level > hdl_errlevel) || ((mask & hdl_mask) == 0)) {
432 
433 		return (USB_FAILURE);
434 	}
435 
436 	/*
437 	 * if we have a dip, and it is not a warning, check
438 	 * the instance number
439 	 */
440 	if (hdl->lh_dip && (level > USB_LOG_L0)) {
441 		if ((hdl_instance_filter != (uint_t)-1) &&
442 		    (ddi_get_instance(hdl->lh_dip) != hdl_instance_filter)) {
443 
444 			return (USB_FAILURE);
445 		}
446 	}
447 
448 	label = hdl->lh_name;
449 
450 	usb_vprintf(hdl->lh_dip, level, label, fmt, ap);
451 
452 	return (USB_SUCCESS);
453 }
454 
455 
456 void
457 usb_dprintf4(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
458 {
459 	va_list ap;
460 
461 	va_start(ap, fmt);
462 	(void) usba_vlog(handle, USB_LOG_L4, mask, fmt, ap);
463 	va_end(ap);
464 }
465 
466 
467 void
468 usb_dprintf3(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
469 {
470 	va_list ap;
471 
472 	va_start(ap, fmt);
473 	(void) usba_vlog(handle, USB_LOG_L3, mask, fmt, ap);
474 	va_end(ap);
475 }
476 
477 
478 void
479 usb_dprintf2(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
480 {
481 	va_list ap;
482 
483 	va_start(ap, fmt);
484 	(void) usba_vlog(handle, USB_LOG_L2, mask, fmt, ap);
485 	va_end(ap);
486 }
487 
488 
489 void
490 usb_dprintf1(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
491 {
492 	va_list ap;
493 
494 	va_start(ap, fmt);
495 	(void) usba_vlog(handle, USB_LOG_L1, mask, fmt, ap);
496 	va_end(ap);
497 }
498 
499 
500 void
501 usb_dprintf0(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
502 {
503 	va_list ap;
504 
505 	va_start(ap, fmt);
506 	(void) usba_vlog(handle, USB_LOG_L0, mask, fmt, ap);
507 	va_end(ap);
508 }
509 
510 
511 int
512 usb_log(usb_log_handle_t handle, uint_t level, uint_t mask, char *fmt, ...)
513 {
514 	va_list	ap;
515 	int rval;
516 
517 	va_start(ap, fmt);
518 	rval = usba_vlog(handle, level, mask, fmt, ap);
519 	va_end(ap);
520 
521 	return (rval);
522 }
523 
524 
525 /*
526  * Provide a default configuration power descriptor
527  */
528 usba_cfg_pwr_descr_t	default_cfg_power = {
529 	18,	/* bLength */
530 	USBA_DESCR_TYPE_CFG_PWR_1_1, /* bDescriptorType */
531 	0,	/* SelfPowerConsumedD0_l */
532 	0,	/* SelfPowerConsumedD0_h */
533 	0,	/* bPowerSummaryId */
534 	0,	/* bBusPowerSavingD1 */
535 	0,	/* bSelfPowerSavingD1 */
536 	0,	/* bBusPowerSavingD2 */
537 	0,	/* bSelfPowerSavingD2 */
538 	100,	/* bBusPowerSavingD3 */
539 	100,	/* bSelfPowerSavingD3 */
540 	0,	/* TransitionTimeFromD1 */
541 	0,	/* TransitionTimeFromD2 */
542 	10,	/* TransitionTimeFromD3 1 Second */
543 };
544 
545 
546 /*
547  * Provide a default interface power descriptor
548  */
549 usba_if_pwr_descr_t default_if_power = {
550 	15,	/* bLength */
551 	USBA_DESCR_TYPE_IF_PWR_1_1, /* bDescriptorType */
552 	8,	/* bmCapabilitiesFlags */
553 	0,	/* bBusPowerSavingD1 */
554 	0,	/* bSelfPowerSavingD1 */
555 	0,	/* bBusPowerSavingD2 */
556 	0,	/* bSelfPowerSavingD2 */
557 	100,	/* bBusPowerSavingD3 */
558 	100,	/* bSelfPowerSavingD3 */
559 	0,	/* TransitionTimeFromD1 */
560 	0,	/* TransitionTimeFromD2 */
561 	10,	/* TransitionTimeFromD3 1 Second */
562 };
563 
564 
565 static void
566 usba_async_req_raise_power(void *arg)
567 {
568 	usba_pm_req_t *pmrq = (usba_pm_req_t *)arg;
569 	int rval;
570 
571 	/*
572 	 * To eliminate race condition between the call to power entry
573 	 * point and our call to raise power level, we first mark the
574 	 * component busy and later idle
575 	 */
576 	(void) pm_busy_component(pmrq->dip, pmrq->comp);
577 	rval = pm_raise_power(pmrq->dip, pmrq->comp, pmrq->level);
578 	(void) pm_idle_component(pmrq->dip, pmrq->comp);
579 	pmrq->cb(pmrq->arg, rval);
580 
581 	/* We are done with pmrq. Free it now */
582 	kmem_free(pmrq, sizeof (usba_pm_req_t));
583 }
584 
585 
586 /* usb function to perform async pm_request_power_change */
587 int
588 usb_req_raise_power(dev_info_t *dip, int comp, int level,
589 	void (*callback)(void *, int), void *arg, usb_flags_t flags)
590 {
591 	usba_pm_req_t *pmrq;
592 
593 	if (flags & USB_FLAGS_SLEEP) {
594 
595 		return (pm_raise_power(dip, comp, level));
596 	}
597 
598 	if ((pmrq = kmem_alloc(sizeof (usba_pm_req_t), KM_NOSLEEP)) ==
599 	    NULL) {
600 
601 		return (USB_FAILURE);
602 	}
603 
604 	pmrq->dip = dip;
605 	pmrq->comp = comp;
606 	pmrq->level = level;
607 	pmrq->cb = callback;
608 	pmrq->arg = arg;
609 	pmrq->flags = flags;
610 
611 	if (usb_async_req(dip, usba_async_req_raise_power,
612 	    (void *)pmrq, USB_FLAGS_NOSLEEP | USB_FLAGS_NOQUEUE) !=
613 	    USB_SUCCESS) {
614 		kmem_free(pmrq, sizeof (usba_pm_req_t));
615 
616 		return (USB_FAILURE);
617 	}
618 
619 	return (USB_SUCCESS);
620 }
621 
622 
623 static void
624 usba_async_req_lower_power(void *arg)
625 {
626 	usba_pm_req_t *pmrq = (usba_pm_req_t *)arg;
627 	int rval;
628 
629 	/*
630 	 * To eliminate race condition between the call to power entry
631 	 * point and our call to lower power level, we call idle component
632 	 * to push ahead the PM timestamp
633 	 */
634 	(void) pm_idle_component(pmrq->dip, pmrq->comp);
635 	rval = pm_lower_power(pmrq->dip, pmrq->comp, pmrq->level);
636 	pmrq->cb(pmrq->arg, rval);
637 }
638 
639 
640 /* usb function to perform async pm_request_power_change */
641 int
642 usb_req_lower_power(dev_info_t *dip, int comp, int level,
643 	void (*callback)(void *, int), void *arg, usb_flags_t flags)
644 {
645 	usba_pm_req_t *pmrq;
646 
647 	if (flags & USB_FLAGS_SLEEP) {
648 
649 		return (pm_lower_power(dip, comp, level));
650 	}
651 
652 	if ((pmrq = kmem_alloc(sizeof (usba_pm_req_t), KM_NOSLEEP)) ==
653 	    NULL) {
654 
655 		return (USB_FAILURE);
656 	}
657 
658 	pmrq->dip = dip;
659 	pmrq->comp = comp;
660 	pmrq->level = level;
661 	pmrq->cb = callback;
662 	pmrq->arg = arg;
663 	pmrq->flags = flags;
664 
665 	if (usb_async_req(dip, usba_async_req_lower_power,
666 	    (void *)pmrq, USB_FLAGS_NOSLEEP | USB_FLAGS_NOQUEUE) !=
667 	    USB_SUCCESS) {
668 		kmem_free(pmrq, sizeof (usba_pm_req_t));
669 
670 		return (USB_FAILURE);
671 	}
672 
673 	return (USB_SUCCESS);
674 }
675 
676 
677 /* function to see if pm is enabled for this device */
678 /*ARGSUSED*/
679 int
680 usb_is_pm_enabled(dev_info_t *dip)
681 {
682 	usba_device_t  *usba_device = usba_get_usba_device(dip);
683 
684 	switch (usb_force_enable_pm) {
685 	case -1:
686 		/* no PM at all */
687 
688 		return (USB_FAILURE);
689 	case 1:
690 		/* PM on all platforms, regardless of hcd */
691 
692 		return (USB_SUCCESS);
693 	case 0:
694 	default:
695 
696 		break;
697 
698 	}
699 
700 	if (usba_device) {
701 		dev_info_t *root_hub_dip;
702 		usba_hcdi_t *hcdi;
703 		int rval;
704 
705 		root_hub_dip = usba_device->usb_root_hub_dip;
706 		if (root_hub_dip == NULL) {
707 
708 			return (USB_FAILURE);
709 		}
710 
711 		hcdi = usba_hcdi_get_hcdi(root_hub_dip);
712 		if (hcdi && hcdi->hcdi_ops->usba_hcdi_pm_support) {
713 			rval = hcdi->hcdi_ops->
714 				usba_hcdi_pm_support(root_hub_dip);
715 			if (rval != USB_SUCCESS) {
716 				USB_DPRINTF_L2(DPRINT_MASK_USBA,
717 				    usbai_log_handle,
718 				    "%s%d: no PM enabled for this device",
719 				    ddi_driver_name(dip),
720 				    ddi_get_instance(dip));
721 			}
722 
723 			return (rval);
724 		}
725 	}
726 
727 	return (USB_FAILURE);
728 }
729 
730 
731 /*
732  * usba_handle_device_remote_wakeup:
733  *	internal function to enable/disable remote wakeup in the device
734  *	or interface
735  */
736 static int
737 usba_handle_device_remote_wakeup(dev_info_t *dip, int cmd)
738 {
739 	int		rval;
740 	uint8_t 	bmRequest = USB_DEV_REQ_HOST_TO_DEV;
741 	uchar_t		bRequest;
742 	uint16_t	wIndex = 0;
743 	usb_cr_t	completion_reason = 0;
744 	usb_cb_flags_t	cb_flags;
745 	usb_pipe_handle_t ph;
746 
747 	USB_DPRINTF_L4(DPRINT_MASK_USBA, usbai_log_handle,
748 	    "usba_handle_device_remote_wakeup: dip = 0x%p", dip);
749 
750 	USBA_CHECK_CONTEXT();
751 
752 	/* get the default pipe */
753 	ph = usba_get_dflt_pipe_handle(dip);
754 
755 	/* do we own the device? */
756 	if (usb_owns_device(dip)) {
757 		bmRequest |= USB_DEV_REQ_RCPT_DEV;
758 	} else {
759 		bmRequest |= USB_DEV_REQ_RCPT_IF;
760 		wIndex = usba_get_ifno(dip);
761 	}
762 	bRequest = ((cmd == USB_REMOTE_WAKEUP_ENABLE) ? USB_REQ_SET_FEATURE :
763 	    USB_REQ_CLEAR_FEATURE);
764 
765 	if ((rval = usb_pipe_sync_ctrl_xfer(dip, ph,
766 	    bmRequest,			/* bmRequest */
767 	    bRequest,			/* bRequest */
768 	    USB_DEV_REMOTE_WAKEUP,	/* wValue */
769 	    wIndex,			/* wIndex */
770 	    0,				/* wLength */
771 	    NULL, 0,
772 	    &completion_reason,
773 	    &cb_flags, USB_FLAGS_SLEEP)) != USB_SUCCESS) {
774 		USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
775 		    "Set/ClearFeature (RemoteWakep) failed: "
776 		    "rval = %d, cmd = %d, cr = 0x%x cb = 0x%x",
777 		    rval, cmd, completion_reason, cb_flags);
778 	}
779 
780 	return (rval);
781 }
782 
783 
784 void
785 usb_enable_parent_notification(dev_info_t *dip)
786 {
787 	USBA_CHECK_CONTEXT();
788 	(void) ndi_prop_create_boolean(DDI_DEV_T_NONE, dip,
789 	    "pm-want-child-notification?");
790 }
791 
792 
793 /*
794  * usb_handle_remote_wakeup:
795  *	check if device supports remote wakeup and, if so, enable/disable
796  *	remote wake up in the device depending upon the command
797  */
798 int
799 usb_handle_remote_wakeup(dev_info_t *dip, int cmd)
800 {
801 	usb_cfg_descr_t	cfg_descr;
802 	uchar_t 	*usb_cfg;	/* buf for config descriptor */
803 	size_t		cfg_length;
804 	int		rval;
805 
806 	USBA_CHECK_CONTEXT();
807 
808 	/* Obtain the raw configuration descriptor */
809 	usb_cfg = usb_get_raw_cfg_data(dip, &cfg_length);
810 
811 	/* get configuration descriptor, must succeed */
812 	rval = usb_parse_cfg_descr(usb_cfg, cfg_length,
813 	    &cfg_descr, USB_CFG_DESCR_SIZE);
814 	ASSERT(rval == USB_CFG_DESCR_SIZE);
815 
816 	/*
817 	 * If the device supports remote wakeup, and PM is enabled,
818 	 * we enable remote wakeup in the device
819 	 */
820 	if ((usb_is_pm_enabled(dip) == USB_SUCCESS) &&
821 	    (cfg_descr.bmAttributes & USB_CFG_ATTR_REMOTE_WAKEUP)) {
822 
823 		rval = usba_handle_device_remote_wakeup(dip, cmd);
824 	} else {
825 		rval = USB_FAILURE;
826 	}
827 
828 	return (rval);
829 }
830 
831 
832 /*
833  * usb_create_pm_components:
834  *	map descriptor into  pm properties
835  */
836 int
837 usb_create_pm_components(dev_info_t *dip, uint_t *pwr_states)
838 {
839 	uchar_t 		*usb_cfg;	/* buf for config descriptor */
840 	usb_cfg_descr_t		cfg_descr;
841 	size_t			cfg_length;
842 	usba_cfg_pwr_descr_t	confpwr_descr;
843 	usba_if_pwr_descr_t	ifpwr_descr;
844 	uint8_t 		cfg_attrib;
845 	int			i, lvl, rval;
846 	int			n_prop = 0;
847 	uint8_t 		*ptr;
848 	char			*drvname;
849 	char			str[USBA_POWER_STR_SIZE];
850 	char			*pm_comp[USBA_N_PMCOMP];
851 
852 	USBA_CHECK_CONTEXT();
853 
854 	if (usb_is_pm_enabled(dip) != USB_SUCCESS) {
855 
856 		return (USB_FAILURE);
857 	}
858 
859 	/* Obtain the raw configuration descriptor */
860 	usb_cfg = usb_get_raw_cfg_data(dip, &cfg_length);
861 
862 	/* get configuration descriptor, must succceed */
863 	rval = usb_parse_cfg_descr(usb_cfg, cfg_length,
864 	    &cfg_descr, USB_CFG_DESCR_SIZE);
865 	ASSERT(rval == USB_CFG_DESCR_SIZE);
866 
867 	cfg_attrib = cfg_descr.bmAttributes;
868 	*pwr_states = 0;
869 
870 	/*
871 	 * Now start creating the pm-components strings
872 	 */
873 	drvname = (char *)ddi_driver_name(dip);
874 	(void) snprintf(str, USBA_POWER_STR_SIZE, "NAME= %s%d Power",
875 	    drvname, ddi_get_instance(dip));
876 
877 	pm_comp[n_prop] = kmem_zalloc(strlen(str) + 1, KM_SLEEP);
878 	(void) strcpy(pm_comp[n_prop++], str);
879 
880 	/*
881 	 * if the device is bus powered we look at the bBusPowerSavingDx
882 	 * fields else we look at bSelfPowerSavingDx fields.
883 	 * OS and USB power states are numerically reversed,
884 	 *
885 	 * Here is the mapping :-
886 	 *	OS State	USB State
887 	 *	0		D3	(minimal or no power)
888 	 *	1		D2
889 	 *	2		D1
890 	 *	3		D0	(Full power)
891 	 *
892 	 * if we own the whole device, we look at the config pwr descr
893 	 * else at the interface pwr descr.
894 	 */
895 	if (usb_owns_device(dip)) {
896 		/* Parse the configuration power descriptor */
897 		rval = usba_parse_cfg_pwr_descr(usb_cfg, cfg_length,
898 		    &confpwr_descr, USBA_CFG_PWR_DESCR_SIZE);
899 
900 		if (rval != USBA_CFG_PWR_DESCR_SIZE) {
901 			USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
902 			    "usb_create_pm_components: "
903 			    "usb_parse_cfg_pwr_descr returns length of %d, "
904 			    "expecting %d", rval, USBA_CFG_PWR_DESCR_SIZE);
905 
906 			return (USB_FAILURE);
907 		}
908 
909 		if (cfg_attrib & USB_CFG_ATTR_SELFPWR) {
910 			ptr = &confpwr_descr.bSelfPowerSavingD3;
911 		} else {
912 			ptr = &confpwr_descr.bBusPowerSavingD3;
913 		}
914 	} else {
915 		/* Parse the interface power descriptor */
916 		rval = usba_parse_if_pwr_descr(usb_cfg,
917 			cfg_length,
918 			usba_get_ifno(dip),	/* interface index */
919 			0,			/* XXXX alt interface index */
920 			&ifpwr_descr,
921 			USBA_IF_PWR_DESCR_SIZE);
922 
923 		if (rval != USBA_IF_PWR_DESCR_SIZE) {
924 			USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
925 			    "usb_create_pm_components: "
926 			    "usb_parse_if_pwr_descr "
927 			    "returns length of %d, "
928 			    "expecting %d", rval, USBA_CFG_PWR_DESCR_SIZE);
929 
930 			return (USB_FAILURE);
931 		}
932 
933 		if (cfg_attrib & USB_CFG_ATTR_SELFPWR) {
934 			ptr =  &ifpwr_descr.bSelfPowerSavingD3;
935 		} else {
936 			ptr =  &ifpwr_descr.bBusPowerSavingD3;
937 		}
938 	}
939 
940 	/* walk thru levels and create prop level=name strings */
941 	for (lvl = USB_DEV_OS_PWR_0; lvl <= USB_DEV_OS_PWR_3; lvl++) {
942 		if (*ptr || (lvl == USB_DEV_OS_PWR_3)) {
943 			(void) snprintf(str, USBA_POWER_STR_SIZE,
944 			    "%d=USB D%d State",
945 			    lvl, USB_DEV_OS_PWR2USB_PWR(lvl));
946 			pm_comp[n_prop] = kmem_zalloc(strlen(str) + 1,
947 								KM_SLEEP);
948 			(void) strcpy(pm_comp[n_prop++], str);
949 
950 			*pwr_states |= USB_DEV_PWRMASK(lvl);
951 		}
952 
953 		ptr -= 2; /* skip to the next power state */
954 	}
955 
956 	USB_DPRINTF_L3(DPRINT_MASK_USBAI, usbai_log_handle,
957 	    "usb_create_pm_components: pwr_states: %x", *pwr_states);
958 
959 	/* now create the actual components */
960 	rval = ddi_prop_update_string_array(DDI_DEV_T_NONE, dip,
961 			"pm-components", pm_comp, n_prop);
962 	if (rval == DDI_PROP_SUCCESS) {
963 		rval = USB_SUCCESS;
964 	} else {
965 		rval = USB_FAILURE;
966 	}
967 
968 	/* display & delete properties */
969 	USB_DPRINTF_L3(DPRINT_MASK_USBAI, usbai_log_handle,
970 	    "usb_create_pm_components: The properties are:");
971 	for (i = 0; i < n_prop; i++) {
972 		USB_DPRINTF_L3(DPRINT_MASK_USBAI, usbai_log_handle,
973 		    "\t%s", pm_comp[i]);
974 		kmem_free(pm_comp[i], strlen(pm_comp[i]) + 1);
975 	}
976 
977 	return (rval);
978 }
979 
980 
981 /*
982  * Generic Functions to set the power level of any usb device
983  *
984  * Since OS and USB power states are numerically reverse,
985  * Here is the mapping :-
986  *	OS State	USB State
987  *	0		D3	(minimal or no power)
988  *	1		D2
989  *	2		D1
990  *	3		D0	(Full power)
991  */
992 
993 /* set device power level to 0 (full power) */
994 /*ARGSUSED*/
995 int
996 usb_set_device_pwrlvl0(dev_info_t *dip)
997 {
998 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
999 	    "usb_set_device_pwrlvl0 : Not Yet Implemented");
1000 
1001 	return (USB_SUCCESS);
1002 }
1003 
1004 
1005 /* set device power level to 1	*/
1006 /*ARGSUSED*/
1007 int
1008 usb_set_device_pwrlvl1(dev_info_t *dip)
1009 {
1010 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1011 	    "usb_set_device_pwrlvl1 : Not Yet Implemented");
1012 
1013 	return (USB_SUCCESS);
1014 }
1015 
1016 
1017 /* set device power level to 2	*/
1018 /*ARGSUSED*/
1019 int
1020 usb_set_device_pwrlvl2(dev_info_t *dip)
1021 {
1022 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1023 	    "usb_set_device_pwrlvl2 : Not Yet Implemented");
1024 
1025 	return (USB_SUCCESS);
1026 }
1027 
1028 
1029 /* set device power level to 3	*/
1030 /*ARGSUSED*/
1031 int
1032 usb_set_device_pwrlvl3(dev_info_t *dip)
1033 {
1034 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1035 	    "usb_set_device_pwrlvl3 : Not Yet Implemented");
1036 
1037 	return (USB_SUCCESS);
1038 }
1039 
1040 
1041 /*
1042  * USB event management
1043  */
1044 typedef void (*peh_t)(dev_info_t *, ddi_eventcookie_t, void *, void *);
1045 
1046 
1047 /*
1048  * usb_register_hotplug_cbs:
1049  *	Register to get callbacks for hotplug events
1050  */
1051 /*ARGSUSED*/
1052 int
1053 usb_register_hotplug_cbs(dev_info_t *dip,
1054     int (*disconnect_event_handler)(dev_info_t *),
1055     int (*reconnect_event_handler)(dev_info_t *))
1056 {
1057 	usba_device_t		*usba_device;
1058 	usba_evdata_t		*evdata;
1059 
1060 	if ((dip == NULL) || (disconnect_event_handler == NULL) ||
1061 	    (reconnect_event_handler == NULL)) {
1062 		USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1063 		    "usb_register_hotplug_cbs: Bad argument(s)");
1064 
1065 		return (USB_FAILURE);
1066 	}
1067 
1068 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1069 	    "usb_register_hotplug_cbs: entry");
1070 
1071 	/*
1072 	 * The event list searches by ddi_get_eventcookie calls below, go
1073 	 * through hubd and so do not apply to host controllers.
1074 	 */
1075 	ASSERT(!usba_is_root_hub(dip));
1076 
1077 	usba_device = usba_get_usba_device(dip);
1078 	evdata = usba_get_evdata(dip);
1079 
1080 	if (usba_device->rm_cookie == NULL) {
1081 		if (ddi_get_eventcookie(dip, DDI_DEVI_REMOVE_EVENT,
1082 		    &usba_device->rm_cookie) != DDI_SUCCESS) {
1083 			USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1084 			    "usb_register_hotplug_cbs: get rm cookie failed");
1085 
1086 			goto fail;
1087 		}
1088 	}
1089 	if (ddi_add_event_handler(dip, usba_device->rm_cookie,
1090 	    (peh_t)disconnect_event_handler,
1091 	    NULL, &evdata->ev_rm_cb_id) != DDI_SUCCESS) {
1092 		USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1093 		    "usb_register_hotplug_cbs: add disconnect handler failed");
1094 
1095 		goto fail;
1096 	}
1097 
1098 	if (usba_device->ins_cookie == NULL) {
1099 		if (ddi_get_eventcookie(dip, DDI_DEVI_INSERT_EVENT,
1100 		    &usba_device->ins_cookie) != DDI_SUCCESS) {
1101 			USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1102 			    "usb_register_hotplug_cbs: get ins cookie failed");
1103 
1104 			goto fail;
1105 		}
1106 	}
1107 	if (ddi_add_event_handler(dip, usba_device->ins_cookie,
1108 	    (peh_t)reconnect_event_handler,
1109 	    NULL, &evdata->ev_ins_cb_id) != DDI_SUCCESS) {
1110 		USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1111 		    "usb_register_hotplug_cbs: add reconnect handler failed");
1112 
1113 		goto fail;
1114 	}
1115 
1116 	mutex_enter(&usba_device->usb_mutex);
1117 	usba_device->usb_client_flags[usba_get_ifno(dip)] |=
1118 						USBA_CLIENT_FLAG_EV_CBS;
1119 	usba_device->usb_client_ev_cb_list->dip = dip;
1120 	mutex_exit(&usba_device->usb_mutex);
1121 
1122 	return (USB_SUCCESS);
1123 
1124 fail:
1125 	usb_unregister_hotplug_cbs(dip);
1126 
1127 	return (USB_FAILURE);
1128 
1129 }
1130 
1131 
1132 /*
1133  * usb_unregister_hotplug_cbs:
1134  *	Unregister hotplug callbacks
1135  */
1136 /*ARGSUSED*/
1137 void
1138 usb_unregister_hotplug_cbs(dev_info_t *dip)
1139 {
1140 	usb_unregister_event_cbs(dip, NULL);
1141 }
1142 
1143 
1144 /*
1145  * usb_register_event_cbs:
1146  *	Register to get callbacks for USB events
1147  */
1148 /*ARGSUSED*/
1149 int
1150 usb_register_event_cbs(dev_info_t *dip, usb_event_t *usb_evdata,
1151 	usb_flags_t flags)
1152 {
1153 	usba_device_t		*usba_device;
1154 	usba_evdata_t		*evdata;
1155 
1156 	if ((dip == NULL) || (usb_evdata == NULL)) {
1157 
1158 		return (USB_FAILURE);
1159 	}
1160 
1161 	/*
1162 	 * The event list searches by ddi_get_eventcookie calls below, go
1163 	 * through hubd and so do not apply to host controllers.
1164 	 */
1165 	ASSERT(!usba_is_root_hub(dip));
1166 
1167 	usba_device = usba_get_usba_device(dip);
1168 	evdata = usba_get_evdata(dip);
1169 
1170 	if (usb_evdata->disconnect_event_handler != NULL) {
1171 		if (usba_device->rm_cookie == NULL) {
1172 			if (ddi_get_eventcookie(dip, DDI_DEVI_REMOVE_EVENT,
1173 			    &usba_device->rm_cookie) != DDI_SUCCESS) {
1174 
1175 				goto fail;
1176 			}
1177 		}
1178 		if (ddi_add_event_handler(dip, usba_device->rm_cookie,
1179 		    (peh_t)usb_evdata->disconnect_event_handler,
1180 		    NULL, &evdata->ev_rm_cb_id) != DDI_SUCCESS) {
1181 
1182 			goto fail;
1183 		}
1184 	}
1185 	if (usb_evdata->reconnect_event_handler != NULL) {
1186 		if (usba_device->ins_cookie == NULL) {
1187 			if (ddi_get_eventcookie(dip, DDI_DEVI_INSERT_EVENT,
1188 			    &usba_device->ins_cookie) != DDI_SUCCESS) {
1189 
1190 				goto fail;
1191 			}
1192 		}
1193 		if (ddi_add_event_handler(dip, usba_device->ins_cookie,
1194 		    (peh_t)usb_evdata->reconnect_event_handler,
1195 		    NULL, &evdata->ev_ins_cb_id) != DDI_SUCCESS) {
1196 
1197 			goto fail;
1198 		}
1199 	}
1200 	if (usb_evdata->post_resume_event_handler != NULL) {
1201 		if (usba_device->resume_cookie == NULL) {
1202 			if (ddi_get_eventcookie(dip, USBA_POST_RESUME_EVENT,
1203 			    &usba_device->resume_cookie) != DDI_SUCCESS) {
1204 
1205 				goto fail;
1206 			}
1207 		}
1208 		if (ddi_add_event_handler(dip, usba_device->resume_cookie,
1209 		    (peh_t)usb_evdata->post_resume_event_handler,
1210 		    NULL, &evdata->ev_resume_cb_id) != DDI_SUCCESS) {
1211 
1212 			goto fail;
1213 		}
1214 	}
1215 	if (usb_evdata->pre_suspend_event_handler != NULL) {
1216 		if (usba_device->suspend_cookie == NULL) {
1217 			if (ddi_get_eventcookie(dip, USBA_PRE_SUSPEND_EVENT,
1218 			    &usba_device->suspend_cookie) != DDI_SUCCESS) {
1219 
1220 				goto fail;
1221 			}
1222 		}
1223 		if (ddi_add_event_handler(dip, usba_device->suspend_cookie,
1224 		    (peh_t)usb_evdata->pre_suspend_event_handler,
1225 		    NULL, &evdata->ev_suspend_cb_id) != DDI_SUCCESS) {
1226 
1227 			goto fail;
1228 		}
1229 	}
1230 
1231 	mutex_enter(&usba_device->usb_mutex);
1232 	usba_device->usb_client_flags[usba_get_ifno(dip)] |=
1233 						USBA_CLIENT_FLAG_EV_CBS;
1234 	usba_device->usb_client_ev_cb_list->dip = dip;
1235 	usba_device->usb_client_ev_cb_list->ev_data = usb_evdata;
1236 	mutex_exit(&usba_device->usb_mutex);
1237 
1238 	return (USB_SUCCESS);
1239 
1240 fail:
1241 	usb_unregister_event_cbs(dip, usb_evdata);
1242 
1243 	return (USB_FAILURE);
1244 
1245 }
1246 
1247 
1248 /*
1249  * usb_unregister_event_cbs:
1250  *	Unregister all event callbacks
1251  */
1252 /*ARGSUSED*/
1253 void
1254 usb_unregister_event_cbs(dev_info_t *dip, usb_event_t *usb_evdata)
1255 {
1256 	usba_evdata_t		*evdata;
1257 	usba_device_t		*usba_device = usba_get_usba_device(dip);
1258 
1259 	evdata = usba_get_evdata(dip);
1260 
1261 	if (evdata->ev_rm_cb_id != NULL) {
1262 		(void) ddi_remove_event_handler(evdata->ev_rm_cb_id);
1263 		evdata->ev_rm_cb_id = NULL;
1264 	}
1265 
1266 	if (evdata->ev_ins_cb_id != NULL) {
1267 		(void) ddi_remove_event_handler(evdata->ev_ins_cb_id);
1268 		evdata->ev_ins_cb_id = NULL;
1269 	}
1270 
1271 	if (evdata->ev_suspend_cb_id != NULL) {
1272 		(void) ddi_remove_event_handler(evdata->ev_suspend_cb_id);
1273 		evdata->ev_suspend_cb_id = NULL;
1274 	}
1275 
1276 	if (evdata->ev_resume_cb_id != NULL) {
1277 		(void) ddi_remove_event_handler(evdata->ev_resume_cb_id);
1278 		evdata->ev_resume_cb_id = NULL;
1279 	}
1280 
1281 	mutex_enter(&usba_device->usb_mutex);
1282 	usba_device->usb_client_flags[usba_get_ifno(dip)] &=
1283 						~USBA_CLIENT_FLAG_EV_CBS;
1284 	mutex_exit(&usba_device->usb_mutex);
1285 }
1286