xref: /titanic_41/usr/src/uts/common/io/usb/usba/usbai.c (revision 146832db19eb2048b216b5dd0ba4424c7d0dfd17)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  *
21  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
22  * Use is subject to license terms.
23  */
24 
25 
26 /*
27  * USBA: Solaris USB Architecture support
28  *
29  * all functions exposed to client drivers  have prefix usb_ while all USBA
30  * internal functions or functions exposed to HCD or hubd only have prefix
31  * usba_
32  *
33  * this file contains initializations, logging/tracing support and PM
34  * support
35  */
36 #define	USBA_FRAMEWORK
37 #include <sys/varargs.h>
38 #include <sys/strsun.h>
39 #include <sys/usb/usba/usba_impl.h>
40 #include <sys/usb/usba/hcdi_impl.h>
41 #include <sys/usb/usba/usba10.h>
42 
43 /*
44  * print buffer protected by mutex for debug stuff. the mutex also
45  * ensures serializing debug messages
46  */
47 static kmutex_t	usba_print_mutex;
48 static char usba_print_buf[USBA_PRINT_BUF_LEN];
49 kmutex_t usbai_mutex;
50 
51 /*
52  * debug stuff
53  */
54 usb_log_handle_t	usbai_log_handle;
55 uint_t			usbai_errlevel = USB_LOG_L4;
56 uint_t			usbai_errmask = (uint_t)-1;
57 
58 #define	USBA_DEBUG_SIZE_EXTRA_ALLOC	8
59 #ifdef	DEBUG
60 #define	USBA_DEBUG_BUF_SIZE \
61 			(0x40000 -  USBA_DEBUG_SIZE_EXTRA_ALLOC)
62 #else
63 #define	USBA_DEBUG_BUF_SIZE \
64 			(0x4000 -  USBA_DEBUG_SIZE_EXTRA_ALLOC)
65 #endif	/* DEBUG */
66 
67 #define	USBA_POWER_STR_SIZE		40
68 
69 int	usba_suppress_dprintf;		/* Suppress debug printing */
70 int	usba_clear_debug_buf_flag;	/* clear debug buf */
71 int	usba_buffer_dprintf = 1;	/* Use a debug print buffer */
72 int	usba_timestamp_dprintf = 0;	/* get time stamps in trace */
73 int	usba_debug_buf_size = USBA_DEBUG_BUF_SIZE;	/* Size of debug buf */
74 int	usba_debug_chatty;		/* L1 msg on console */
75 
76 static char *usba_debug_buf = NULL;	/* The debug buf */
77 static char *usba_buf_sptr, *usba_buf_eptr;
78 static hrtime_t usba_last_timestamp;	/* last time stamp in trace */
79 
80 /*
81  * Set to 1 to enable PM.
82  */
83 int usb_force_enable_pm = 0;
84 
85 /* USBA framework initializations */
86 void
87 usba_usbai_initialization()
88 {
89 	usbai_log_handle = usb_alloc_log_hdl(NULL, "usbai", &usbai_errlevel,
90 	    &usbai_errmask, NULL, 0);
91 
92 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
93 	    "usba_usbai_initialization");
94 
95 	mutex_init(&usba_print_mutex, NULL, MUTEX_DRIVER, NULL);
96 	mutex_init(&usbai_mutex, NULL, MUTEX_DRIVER, NULL);
97 }
98 
99 
100 /* USBA framework destroys */
101 void
102 usba_usbai_destroy()
103 {
104 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
105 	    "usba_usbai_destroy");
106 
107 	mutex_destroy(&usba_print_mutex);
108 	mutex_destroy(&usbai_mutex);
109 	if (usba_debug_buf) {
110 		kmem_free(usba_debug_buf,
111 		    usba_debug_buf_size + USBA_DEBUG_SIZE_EXTRA_ALLOC);
112 	}
113 
114 	usb_free_log_hdl(usbai_log_handle);
115 }
116 
117 
118 /*
119  * debug, log, and console message handling
120  */
121 usb_log_handle_t
122 usb_alloc_log_hdl(dev_info_t *dip, char *name,
123 	uint_t *errlevel, uint_t *mask, uint_t *instance_filter,
124 	usb_flags_t flags)
125 {
126 	usba_log_handle_impl_t	*hdl;
127 
128 	USBA_CHECK_CONTEXT();
129 	hdl = kmem_zalloc(sizeof (*hdl), KM_SLEEP);
130 
131 	hdl->lh_dip = dip;
132 	if (dip && (name == NULL)) {
133 		hdl->lh_name = (char *)ddi_driver_name(dip);
134 	} else {
135 		hdl->lh_name = name;
136 	}
137 	hdl->lh_errlevel = errlevel;
138 	hdl->lh_mask = mask;
139 	hdl->lh_instance_filter = instance_filter;
140 	hdl->lh_flags = flags;
141 
142 #ifdef __lock_lint
143 	(void) usb_alloc_log_handle(dip, name, errlevel, mask,
144 	    instance_filter, 0, flags);
145 	usb_free_log_handle(NULL);
146 #endif
147 
148 	return ((usb_log_handle_t)hdl);
149 }
150 
151 
152 /*ARGSUSED*/
153 usb_log_handle_t
154 usb_alloc_log_handle(dev_info_t *dip, char *name,
155 	uint_t *errlevel, uint_t *mask, uint_t *instance_filter,
156 	uint_t reserved, usb_flags_t flags)
157 {
158 	return (usb_alloc_log_hdl(dip, name, errlevel, mask,
159 	    instance_filter, flags));
160 }
161 
162 void
163 usb_free_log_handle(usb_log_handle_t handle)
164 {
165 	if (handle) {
166 		kmem_free(handle, sizeof (usba_log_handle_impl_t));
167 	}
168 }
169 
170 void
171 usb_free_log_hdl(usb_log_handle_t handle)
172 {
173 	if (handle) {
174 		kmem_free(handle, sizeof (usba_log_handle_impl_t));
175 	}
176 }
177 
178 
179 static void
180 usba_clear_dprint_buf()
181 {
182 	if (usba_debug_buf) {
183 		usba_buf_sptr = usba_debug_buf;
184 		usba_buf_eptr = usba_debug_buf + usba_debug_buf_size;
185 		bzero(usba_debug_buf, usba_debug_buf_size +
186 		    USBA_DEBUG_SIZE_EXTRA_ALLOC);
187 	}
188 }
189 
190 
191 #ifdef DEBUG
192 char *
193 usba_dbuf_tail(uint_t lines)
194 {
195 	int	count;
196 	char	*r = NULL;
197 
198 	mutex_enter(&usba_print_mutex);
199 	if (usba_debug_buf) {
200 		count = 0;
201 		r = usba_buf_sptr;
202 		while ((count < lines) && (r > usba_debug_buf)) {
203 			if (*r == '\n') {
204 				count++;
205 			}
206 			r--;
207 		}
208 	}
209 	mutex_exit(&usba_print_mutex);
210 
211 	return (r);
212 }
213 #endif	/* DEBUG */
214 
215 
216 static void usb_vprintf(dev_info_t *, int, char *, char *, va_list)
217 	__KVPRINTFLIKE(4);
218 
219 static void
220 usb_vprintf(dev_info_t *dip, int level, char *label, char *fmt, va_list ap)
221 {
222 	size_t len;
223 	int instance;
224 	char driver_name[USBA_DRVNAME_LEN];
225 	char *msg_ptr;
226 
227 	if (usba_suppress_dprintf) {
228 
229 		return;
230 	}
231 
232 	*driver_name = '\0';
233 	mutex_enter(&usba_print_mutex);
234 
235 	/*
236 	 * Check if we have a valid buf size?
237 	 * Suppress logging to usb_buffer if so.
238 	 */
239 	if (usba_debug_buf_size <= 0) {
240 
241 		usba_buffer_dprintf = 0;
242 	}
243 
244 	/*
245 	 * if there is label and dip, use <driver name><instance>:
246 	 * otherwise just use the label
247 	 */
248 	if (dip) {
249 		instance = ddi_get_instance(dip);
250 		(void) snprintf(driver_name, USBA_DRVNAME_LEN,
251 		    "%s%d", ddi_driver_name(dip), instance);
252 	}
253 
254 	if (label == (char *)NULL) {
255 		len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN, "\t");
256 	} else if (usba_timestamp_dprintf) {
257 		hrtime_t t = gethrtime();
258 		hrtime_t elapsed = (t - usba_last_timestamp)/1000;
259 		usba_last_timestamp = t;
260 
261 		if (dip) {
262 
263 			len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
264 			    "+%lld->%p: %s%d: ", elapsed,
265 			    (void *)curthread, label, instance);
266 		} else {
267 			len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
268 			    "+%lld->%p: %s: ", elapsed,
269 			    (void *)curthread, label);
270 		}
271 	} else {
272 		if (dip) {
273 			len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
274 			    "%s%d:\t", label, instance);
275 		} else {
276 			len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
277 			    "%s:\t", label);
278 		}
279 	}
280 
281 
282 	msg_ptr = usba_print_buf + len;
283 	(void) vsnprintf(msg_ptr, USBA_PRINT_BUF_LEN - len - 2, fmt, ap);
284 
285 	len = min(strlen(usba_print_buf), USBA_PRINT_BUF_LEN - 2);
286 	usba_print_buf[len++] = '\n';
287 	usba_print_buf[len] = '\0';
288 
289 	/*
290 	 * stuff the message in the debug buf
291 	 */
292 	if (usba_buffer_dprintf) {
293 		if (usba_debug_buf == NULL) {
294 			usba_debug_buf = kmem_alloc(
295 			    usba_debug_buf_size + USBA_DEBUG_SIZE_EXTRA_ALLOC,
296 			    KM_SLEEP);
297 			usba_clear_dprint_buf();
298 		} else if (usba_clear_debug_buf_flag) {
299 			usba_clear_dprint_buf();
300 			usba_clear_debug_buf_flag = 0;
301 		}
302 
303 		/*
304 		 * overwrite >>>> that might be over the end of the
305 		 * the buffer
306 		 */
307 		*(usba_debug_buf + usba_debug_buf_size) = '\0';
308 
309 		if ((usba_buf_sptr + len) > usba_buf_eptr) {
310 			size_t left = _PTRDIFF(usba_buf_eptr, usba_buf_sptr);
311 
312 			bcopy(usba_print_buf, usba_buf_sptr, left);
313 			bcopy((caddr_t)usba_print_buf + left,
314 			    usba_debug_buf, len - left);
315 			usba_buf_sptr = usba_debug_buf + len - left;
316 		} else {
317 			bcopy(usba_print_buf, usba_buf_sptr, len);
318 			usba_buf_sptr += len;
319 		}
320 		/* add marker */
321 		(void) sprintf(usba_buf_sptr, ">>>>");
322 	}
323 
324 	/*
325 	 * L4-L2 message may go to the log buf if not logged in usba_debug_buf
326 	 * L1 messages will go to the log buf in non-debug kernels and
327 	 * to console and log buf in debug kernels if usba_debug_chatty
328 	 * has been set
329 	 * L0 messages are warnings and will go to console and log buf and
330 	 * include the pathname, if available
331 	 */
332 
333 	switch (level) {
334 	case USB_LOG_L4:
335 	case USB_LOG_L3:
336 	case USB_LOG_L2:
337 		if (!usba_buffer_dprintf) {
338 			cmn_err(CE_CONT, "^%s", usba_print_buf);
339 		}
340 		break;
341 	case USB_LOG_L1:
342 		if (dip) {
343 			char *pathname = kmem_alloc(MAXPATHLEN, KM_NOSLEEP);
344 			if (pathname) {
345 				cmn_err(CE_CONT,
346 				    usba_debug_chatty ?
347 				    "%s (%s): %s" : "?%s (%s): %s",
348 				    ddi_pathname(dip, pathname),
349 				    driver_name, msg_ptr);
350 				kmem_free(pathname, MAXPATHLEN);
351 			} else {
352 				cmn_err(CE_CONT,
353 				    usba_debug_chatty ?
354 				    "%s" : "?%s", usba_print_buf);
355 			}
356 		} else {
357 			cmn_err(CE_CONT,
358 			    usba_debug_chatty ? "%s" : "?%s",
359 			    usba_print_buf);
360 		}
361 		break;
362 	case USB_LOG_L0:
363 		/* Strip the "\n" added earlier */
364 		if (usba_print_buf[len - 1] == '\n') {
365 			usba_print_buf[len - 1] = '\0';
366 		}
367 		if (msg_ptr[len - 1] == '\n') {
368 			msg_ptr[len - 1] = '\0';
369 		}
370 		if (dip) {
371 			char *pathname = kmem_alloc(MAXPATHLEN, KM_NOSLEEP);
372 			if (pathname) {
373 				cmn_err(CE_WARN, "%s (%s): %s",
374 				    ddi_pathname(dip, pathname),
375 				    driver_name, msg_ptr);
376 				kmem_free(pathname, MAXPATHLEN);
377 			} else {
378 				cmn_err(CE_WARN, usba_print_buf);
379 			}
380 		} else {
381 			cmn_err(CE_WARN, usba_print_buf);
382 		}
383 		break;
384 	}
385 
386 	mutex_exit(&usba_print_mutex);
387 }
388 
389 int
390 usba_vlog(usb_log_handle_t, uint_t, uint_t, char *, va_list)
391 	__KVPRINTFLIKE(4);
392 
393 /* When usba10_calls.c goes away, this function can be made static again. */
394 int
395 usba_vlog(usb_log_handle_t handle, uint_t level, uint_t mask,
396     char *fmt, va_list ap)
397 {
398 	usba_log_handle_impl_t *hdl = (usba_log_handle_impl_t *)handle;
399 	char *label;
400 	uint_t hdl_errlevel, hdl_mask, hdl_instance_filter;
401 
402 	/* if there is no handle, use usba as label */
403 	if (hdl == NULL) {
404 		usb_vprintf(NULL, level, "usba", fmt, ap);
405 
406 		return (USB_SUCCESS);
407 	}
408 
409 	/* look up the filters and set defaults */
410 	if (hdl->lh_errlevel) {
411 		hdl_errlevel = *(hdl->lh_errlevel);
412 	} else {
413 		hdl_errlevel = 0;
414 	}
415 
416 	if (hdl->lh_mask) {
417 		hdl_mask = *(hdl->lh_mask);
418 	} else {
419 		hdl_mask = (uint_t)-1;
420 	}
421 
422 	if (hdl->lh_instance_filter) {
423 		hdl_instance_filter = *(hdl->lh_instance_filter);
424 	} else {
425 		hdl_instance_filter = (uint_t)-1;
426 	}
427 
428 	/* if threshold is lower or mask doesn't match, we are done */
429 	if ((level > hdl_errlevel) || ((mask & hdl_mask) == 0)) {
430 
431 		return (USB_FAILURE);
432 	}
433 
434 	/*
435 	 * if we have a dip, and it is not a warning, check
436 	 * the instance number
437 	 */
438 	if (hdl->lh_dip && (level > USB_LOG_L0)) {
439 		if ((hdl_instance_filter != (uint_t)-1) &&
440 		    (ddi_get_instance(hdl->lh_dip) != hdl_instance_filter)) {
441 
442 			return (USB_FAILURE);
443 		}
444 	}
445 
446 	label = hdl->lh_name;
447 
448 	usb_vprintf(hdl->lh_dip, level, label, fmt, ap);
449 
450 	return (USB_SUCCESS);
451 }
452 
453 
454 void
455 usb_dprintf4(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
456 {
457 	va_list ap;
458 
459 	va_start(ap, fmt);
460 	(void) usba_vlog(handle, USB_LOG_L4, mask, fmt, ap);
461 	va_end(ap);
462 }
463 
464 
465 void
466 usb_dprintf3(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
467 {
468 	va_list ap;
469 
470 	va_start(ap, fmt);
471 	(void) usba_vlog(handle, USB_LOG_L3, mask, fmt, ap);
472 	va_end(ap);
473 }
474 
475 
476 void
477 usb_dprintf2(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
478 {
479 	va_list ap;
480 
481 	va_start(ap, fmt);
482 	(void) usba_vlog(handle, USB_LOG_L2, mask, fmt, ap);
483 	va_end(ap);
484 }
485 
486 
487 void
488 usb_dprintf1(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
489 {
490 	va_list ap;
491 
492 	va_start(ap, fmt);
493 	(void) usba_vlog(handle, USB_LOG_L1, mask, fmt, ap);
494 	va_end(ap);
495 }
496 
497 
498 void
499 usb_dprintf0(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
500 {
501 	va_list ap;
502 
503 	va_start(ap, fmt);
504 	(void) usba_vlog(handle, USB_LOG_L0, mask, fmt, ap);
505 	va_end(ap);
506 }
507 
508 
509 int
510 usb_log(usb_log_handle_t handle, uint_t level, uint_t mask, char *fmt, ...)
511 {
512 	va_list	ap;
513 	int rval;
514 
515 	va_start(ap, fmt);
516 	rval = usba_vlog(handle, level, mask, fmt, ap);
517 	va_end(ap);
518 
519 	return (rval);
520 }
521 
522 
523 /*
524  * Provide a default configuration power descriptor
525  */
526 usba_cfg_pwr_descr_t	default_cfg_power = {
527 	18,	/* bLength */
528 	USBA_DESCR_TYPE_CFG_PWR_1_1, /* bDescriptorType */
529 	0,	/* SelfPowerConsumedD0_l */
530 	0,	/* SelfPowerConsumedD0_h */
531 	0,	/* bPowerSummaryId */
532 	0,	/* bBusPowerSavingD1 */
533 	0,	/* bSelfPowerSavingD1 */
534 	0,	/* bBusPowerSavingD2 */
535 	0,	/* bSelfPowerSavingD2 */
536 	100,	/* bBusPowerSavingD3 */
537 	100,	/* bSelfPowerSavingD3 */
538 	0,	/* TransitionTimeFromD1 */
539 	0,	/* TransitionTimeFromD2 */
540 	10,	/* TransitionTimeFromD3 1 Second */
541 };
542 
543 
544 /*
545  * Provide a default interface power descriptor
546  */
547 usba_if_pwr_descr_t default_if_power = {
548 	15,	/* bLength */
549 	USBA_DESCR_TYPE_IF_PWR_1_1, /* bDescriptorType */
550 	8,	/* bmCapabilitiesFlags */
551 	0,	/* bBusPowerSavingD1 */
552 	0,	/* bSelfPowerSavingD1 */
553 	0,	/* bBusPowerSavingD2 */
554 	0,	/* bSelfPowerSavingD2 */
555 	100,	/* bBusPowerSavingD3 */
556 	100,	/* bSelfPowerSavingD3 */
557 	0,	/* TransitionTimeFromD1 */
558 	0,	/* TransitionTimeFromD2 */
559 	10,	/* TransitionTimeFromD3 1 Second */
560 };
561 
562 
563 static void
564 usba_async_req_raise_power(void *arg)
565 {
566 	usba_pm_req_t *pmrq = (usba_pm_req_t *)arg;
567 	int rval;
568 
569 	/*
570 	 * To eliminate race condition between the call to power entry
571 	 * point and our call to raise power level, we first mark the
572 	 * component busy and later idle
573 	 */
574 	(void) pm_busy_component(pmrq->dip, pmrq->comp);
575 	rval = pm_raise_power(pmrq->dip, pmrq->comp, pmrq->level);
576 	(void) pm_idle_component(pmrq->dip, pmrq->comp);
577 	pmrq->cb(pmrq->arg, rval);
578 
579 	/* We are done with pmrq. Free it now */
580 	kmem_free(pmrq, sizeof (usba_pm_req_t));
581 }
582 
583 
584 /* usb function to perform async pm_request_power_change */
585 int
586 usb_req_raise_power(dev_info_t *dip, int comp, int level,
587 	void (*callback)(void *, int), void *arg, usb_flags_t flags)
588 {
589 	usba_pm_req_t *pmrq;
590 
591 	if (flags & USB_FLAGS_SLEEP) {
592 
593 		return (pm_raise_power(dip, comp, level));
594 	}
595 
596 	if ((pmrq = kmem_alloc(sizeof (usba_pm_req_t), KM_NOSLEEP)) ==
597 	    NULL) {
598 
599 		return (USB_FAILURE);
600 	}
601 
602 	pmrq->dip = dip;
603 	pmrq->comp = comp;
604 	pmrq->level = level;
605 	pmrq->cb = callback;
606 	pmrq->arg = arg;
607 	pmrq->flags = flags;
608 
609 	if (usb_async_req(dip, usba_async_req_raise_power,
610 	    (void *)pmrq, USB_FLAGS_NOSLEEP | USB_FLAGS_NOQUEUE) !=
611 	    USB_SUCCESS) {
612 		kmem_free(pmrq, sizeof (usba_pm_req_t));
613 
614 		return (USB_FAILURE);
615 	}
616 
617 	return (USB_SUCCESS);
618 }
619 
620 
621 static void
622 usba_async_req_lower_power(void *arg)
623 {
624 	usba_pm_req_t *pmrq = (usba_pm_req_t *)arg;
625 	int rval;
626 
627 	/*
628 	 * To eliminate race condition between the call to power entry
629 	 * point and our call to lower power level, we call idle component
630 	 * to push ahead the PM timestamp
631 	 */
632 	(void) pm_idle_component(pmrq->dip, pmrq->comp);
633 	rval = pm_lower_power(pmrq->dip, pmrq->comp, pmrq->level);
634 	pmrq->cb(pmrq->arg, rval);
635 }
636 
637 
638 /* usb function to perform async pm_request_power_change */
639 int
640 usb_req_lower_power(dev_info_t *dip, int comp, int level,
641 	void (*callback)(void *, int), void *arg, usb_flags_t flags)
642 {
643 	usba_pm_req_t *pmrq;
644 
645 	if (flags & USB_FLAGS_SLEEP) {
646 
647 		return (pm_lower_power(dip, comp, level));
648 	}
649 
650 	if ((pmrq = kmem_alloc(sizeof (usba_pm_req_t), KM_NOSLEEP)) ==
651 	    NULL) {
652 
653 		return (USB_FAILURE);
654 	}
655 
656 	pmrq->dip = dip;
657 	pmrq->comp = comp;
658 	pmrq->level = level;
659 	pmrq->cb = callback;
660 	pmrq->arg = arg;
661 	pmrq->flags = flags;
662 
663 	if (usb_async_req(dip, usba_async_req_lower_power,
664 	    (void *)pmrq, USB_FLAGS_NOSLEEP | USB_FLAGS_NOQUEUE) !=
665 	    USB_SUCCESS) {
666 		kmem_free(pmrq, sizeof (usba_pm_req_t));
667 
668 		return (USB_FAILURE);
669 	}
670 
671 	return (USB_SUCCESS);
672 }
673 
674 
675 /* function to see if pm is enabled for this device */
676 /*ARGSUSED*/
677 int
678 usb_is_pm_enabled(dev_info_t *dip)
679 {
680 	usba_device_t  *usba_device = usba_get_usba_device(dip);
681 
682 	switch (usb_force_enable_pm) {
683 	case -1:
684 		/* no PM at all */
685 
686 		return (USB_FAILURE);
687 	case 1:
688 		/* PM on all platforms, regardless of hcd */
689 
690 		return (USB_SUCCESS);
691 	case 0:
692 	default:
693 
694 		break;
695 
696 	}
697 
698 	if (usba_device) {
699 		dev_info_t *root_hub_dip;
700 		usba_hcdi_t *hcdi;
701 		int rval;
702 
703 		root_hub_dip = usba_device->usb_root_hub_dip;
704 		if (root_hub_dip == NULL) {
705 
706 			return (USB_FAILURE);
707 		}
708 
709 		hcdi = usba_hcdi_get_hcdi(root_hub_dip);
710 		if (hcdi && hcdi->hcdi_ops->usba_hcdi_pm_support) {
711 			rval = hcdi->hcdi_ops->
712 			    usba_hcdi_pm_support(root_hub_dip);
713 			if (rval != USB_SUCCESS) {
714 				USB_DPRINTF_L2(DPRINT_MASK_USBA,
715 				    usbai_log_handle,
716 				    "%s%d: no PM enabled for this device",
717 				    ddi_driver_name(dip),
718 				    ddi_get_instance(dip));
719 			}
720 
721 			return (rval);
722 		}
723 	}
724 
725 	return (USB_FAILURE);
726 }
727 
728 
729 /*
730  * usba_handle_device_remote_wakeup:
731  *	internal function to enable/disable remote wakeup in the device
732  *	or interface
733  */
734 static int
735 usba_handle_device_remote_wakeup(dev_info_t *dip, int cmd)
736 {
737 	int		rval;
738 	uint8_t 	bmRequest = USB_DEV_REQ_HOST_TO_DEV;
739 	uchar_t		bRequest;
740 	uint16_t	wIndex = 0;
741 	usb_cr_t	completion_reason = 0;
742 	usb_cb_flags_t	cb_flags;
743 	usb_pipe_handle_t ph;
744 
745 	USB_DPRINTF_L4(DPRINT_MASK_USBA, usbai_log_handle,
746 	    "usba_handle_device_remote_wakeup: dip = 0x%p", (void *)dip);
747 
748 	USBA_CHECK_CONTEXT();
749 
750 	/* get the default pipe */
751 	ph = usba_get_dflt_pipe_handle(dip);
752 
753 	/* do we own the device? */
754 	if (usb_owns_device(dip)) {
755 		bmRequest |= USB_DEV_REQ_RCPT_DEV;
756 	} else {
757 		bmRequest |= USB_DEV_REQ_RCPT_IF;
758 		wIndex = usba_get_ifno(dip);
759 	}
760 	bRequest = ((cmd == USB_REMOTE_WAKEUP_ENABLE) ? USB_REQ_SET_FEATURE :
761 	    USB_REQ_CLEAR_FEATURE);
762 
763 	if ((rval = usb_pipe_sync_ctrl_xfer(dip, ph,
764 	    bmRequest,			/* bmRequest */
765 	    bRequest,			/* bRequest */
766 	    USB_DEV_REMOTE_WAKEUP,	/* wValue */
767 	    wIndex,			/* wIndex */
768 	    0,				/* wLength */
769 	    NULL, 0,
770 	    &completion_reason,
771 	    &cb_flags, USB_FLAGS_SLEEP)) != USB_SUCCESS) {
772 		USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
773 		    "Set/ClearFeature (RemoteWakep) failed: "
774 		    "rval = %d, cmd = %d, cr = 0x%x cb = 0x%x",
775 		    rval, cmd, completion_reason, cb_flags);
776 	}
777 
778 	return (rval);
779 }
780 
781 
782 void
783 usb_enable_parent_notification(dev_info_t *dip)
784 {
785 	USBA_CHECK_CONTEXT();
786 	(void) ndi_prop_create_boolean(DDI_DEV_T_NONE, dip,
787 	    "pm-want-child-notification?");
788 }
789 
790 
791 /*
792  * usb_handle_remote_wakeup:
793  *	check if device supports remote wakeup and, if so, enable/disable
794  *	remote wake up in the device depending upon the command
795  */
796 int
797 usb_handle_remote_wakeup(dev_info_t *dip, int cmd)
798 {
799 	usb_cfg_descr_t	cfg_descr;
800 	uchar_t 	*usb_cfg;	/* buf for config descriptor */
801 	size_t		cfg_length;
802 	int		rval;
803 
804 	USBA_CHECK_CONTEXT();
805 
806 	/* Obtain the raw configuration descriptor */
807 	usb_cfg = usb_get_raw_cfg_data(dip, &cfg_length);
808 
809 	/* get configuration descriptor, must succeed */
810 	rval = usb_parse_cfg_descr(usb_cfg, cfg_length,
811 	    &cfg_descr, USB_CFG_DESCR_SIZE);
812 	ASSERT(rval == USB_CFG_DESCR_SIZE);
813 
814 	/*
815 	 * If the device supports remote wakeup, and PM is enabled,
816 	 * we enable remote wakeup in the device
817 	 */
818 	if ((usb_is_pm_enabled(dip) == USB_SUCCESS) &&
819 	    (cfg_descr.bmAttributes & USB_CFG_ATTR_REMOTE_WAKEUP)) {
820 
821 		rval = usba_handle_device_remote_wakeup(dip, cmd);
822 	} else {
823 		rval = USB_FAILURE;
824 	}
825 
826 	return (rval);
827 }
828 
829 
830 /*
831  * usb_create_pm_components:
832  *	map descriptor into  pm properties
833  */
834 int
835 usb_create_pm_components(dev_info_t *dip, uint_t *pwr_states)
836 {
837 	uchar_t 		*usb_cfg;	/* buf for config descriptor */
838 	usb_cfg_descr_t		cfg_descr;
839 	size_t			cfg_length;
840 	usba_cfg_pwr_descr_t	confpwr_descr;
841 	usba_if_pwr_descr_t	ifpwr_descr;
842 	uint8_t 		cfg_attrib;
843 	int			i, lvl, rval;
844 	int			n_prop = 0;
845 	uint8_t 		*ptr;
846 	char			*drvname;
847 	char			str[USBA_POWER_STR_SIZE];
848 	char			*pm_comp[USBA_N_PMCOMP];
849 
850 	USBA_CHECK_CONTEXT();
851 
852 	if (usb_is_pm_enabled(dip) != USB_SUCCESS) {
853 
854 		return (USB_FAILURE);
855 	}
856 
857 	/* Obtain the raw configuration descriptor */
858 	usb_cfg = usb_get_raw_cfg_data(dip, &cfg_length);
859 
860 	/* get configuration descriptor, must succceed */
861 	rval = usb_parse_cfg_descr(usb_cfg, cfg_length,
862 	    &cfg_descr, USB_CFG_DESCR_SIZE);
863 	ASSERT(rval == USB_CFG_DESCR_SIZE);
864 
865 	cfg_attrib = cfg_descr.bmAttributes;
866 	*pwr_states = 0;
867 
868 	/*
869 	 * Now start creating the pm-components strings
870 	 */
871 	drvname = (char *)ddi_driver_name(dip);
872 	(void) snprintf(str, USBA_POWER_STR_SIZE, "NAME= %s%d Power",
873 	    drvname, ddi_get_instance(dip));
874 
875 	pm_comp[n_prop] = kmem_zalloc(strlen(str) + 1, KM_SLEEP);
876 	(void) strcpy(pm_comp[n_prop++], str);
877 
878 	/*
879 	 * if the device is bus powered we look at the bBusPowerSavingDx
880 	 * fields else we look at bSelfPowerSavingDx fields.
881 	 * OS and USB power states are numerically reversed,
882 	 *
883 	 * Here is the mapping :-
884 	 *	OS State	USB State
885 	 *	0		D3	(minimal or no power)
886 	 *	1		D2
887 	 *	2		D1
888 	 *	3		D0	(Full power)
889 	 *
890 	 * if we own the whole device, we look at the config pwr descr
891 	 * else at the interface pwr descr.
892 	 */
893 	if (usb_owns_device(dip)) {
894 		/* Parse the configuration power descriptor */
895 		rval = usba_parse_cfg_pwr_descr(usb_cfg, cfg_length,
896 		    &confpwr_descr, USBA_CFG_PWR_DESCR_SIZE);
897 
898 		if (rval != USBA_CFG_PWR_DESCR_SIZE) {
899 			USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
900 			    "usb_create_pm_components: "
901 			    "usb_parse_cfg_pwr_descr returns length of %d, "
902 			    "expecting %d", rval, USBA_CFG_PWR_DESCR_SIZE);
903 
904 			return (USB_FAILURE);
905 		}
906 
907 		if (cfg_attrib & USB_CFG_ATTR_SELFPWR) {
908 			ptr = &confpwr_descr.bSelfPowerSavingD3;
909 		} else {
910 			ptr = &confpwr_descr.bBusPowerSavingD3;
911 		}
912 	} else {
913 		/* Parse the interface power descriptor */
914 		rval = usba_parse_if_pwr_descr(usb_cfg,
915 		    cfg_length,
916 		    usba_get_ifno(dip),	/* interface index */
917 		    0,			/* XXXX alt interface index */
918 		    &ifpwr_descr,
919 		    USBA_IF_PWR_DESCR_SIZE);
920 
921 		if (rval != USBA_IF_PWR_DESCR_SIZE) {
922 			USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
923 			    "usb_create_pm_components: "
924 			    "usb_parse_if_pwr_descr "
925 			    "returns length of %d, "
926 			    "expecting %d", rval, USBA_CFG_PWR_DESCR_SIZE);
927 
928 			return (USB_FAILURE);
929 		}
930 
931 		if (cfg_attrib & USB_CFG_ATTR_SELFPWR) {
932 			ptr =  &ifpwr_descr.bSelfPowerSavingD3;
933 		} else {
934 			ptr =  &ifpwr_descr.bBusPowerSavingD3;
935 		}
936 	}
937 
938 	/* walk thru levels and create prop level=name strings */
939 	for (lvl = USB_DEV_OS_PWR_0; lvl <= USB_DEV_OS_PWR_3; lvl++) {
940 		if (*ptr || (lvl == USB_DEV_OS_PWR_3)) {
941 			(void) snprintf(str, USBA_POWER_STR_SIZE,
942 			    "%d=USB D%d State",
943 			    lvl, USB_DEV_OS_PWR2USB_PWR(lvl));
944 			pm_comp[n_prop] = kmem_zalloc(strlen(str) + 1,
945 			    KM_SLEEP);
946 			(void) strcpy(pm_comp[n_prop++], str);
947 
948 			*pwr_states |= USB_DEV_PWRMASK(lvl);
949 		}
950 
951 		ptr -= 2; /* skip to the next power state */
952 	}
953 
954 	USB_DPRINTF_L3(DPRINT_MASK_USBAI, usbai_log_handle,
955 	    "usb_create_pm_components: pwr_states: %x", *pwr_states);
956 
957 	/* now create the actual components */
958 	rval = ddi_prop_update_string_array(DDI_DEV_T_NONE, dip,
959 	    "pm-components", pm_comp, n_prop);
960 	if (rval == DDI_PROP_SUCCESS) {
961 		rval = USB_SUCCESS;
962 	} else {
963 		rval = USB_FAILURE;
964 	}
965 
966 	/* display & delete properties */
967 	USB_DPRINTF_L3(DPRINT_MASK_USBAI, usbai_log_handle,
968 	    "usb_create_pm_components: The properties are:");
969 	for (i = 0; i < n_prop; i++) {
970 		USB_DPRINTF_L3(DPRINT_MASK_USBAI, usbai_log_handle,
971 		    "\t%s", pm_comp[i]);
972 		kmem_free(pm_comp[i], strlen(pm_comp[i]) + 1);
973 	}
974 
975 	return (rval);
976 }
977 
978 
979 /*
980  * Generic Functions to set the power level of any usb device
981  *
982  * Since OS and USB power states are numerically reverse,
983  * Here is the mapping :-
984  *	OS State	USB State
985  *	0		D3	(minimal or no power)
986  *	1		D2
987  *	2		D1
988  *	3		D0	(Full power)
989  */
990 
991 /* set device power level to 0 (full power) */
992 /*ARGSUSED*/
993 int
994 usb_set_device_pwrlvl0(dev_info_t *dip)
995 {
996 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
997 	    "usb_set_device_pwrlvl0 : Not Yet Implemented");
998 
999 	return (USB_SUCCESS);
1000 }
1001 
1002 
1003 /* set device power level to 1	*/
1004 /*ARGSUSED*/
1005 int
1006 usb_set_device_pwrlvl1(dev_info_t *dip)
1007 {
1008 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1009 	    "usb_set_device_pwrlvl1 : Not Yet Implemented");
1010 
1011 	return (USB_SUCCESS);
1012 }
1013 
1014 
1015 /* set device power level to 2	*/
1016 /*ARGSUSED*/
1017 int
1018 usb_set_device_pwrlvl2(dev_info_t *dip)
1019 {
1020 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1021 	    "usb_set_device_pwrlvl2 : Not Yet Implemented");
1022 
1023 	return (USB_SUCCESS);
1024 }
1025 
1026 
1027 /* set device power level to 3	*/
1028 /*ARGSUSED*/
1029 int
1030 usb_set_device_pwrlvl3(dev_info_t *dip)
1031 {
1032 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1033 	    "usb_set_device_pwrlvl3 : Not Yet Implemented");
1034 
1035 	return (USB_SUCCESS);
1036 }
1037 
1038 
1039 /*
1040  * USB event management
1041  */
1042 typedef void (*peh_t)(dev_info_t *, ddi_eventcookie_t, void *, void *);
1043 
1044 
1045 /*
1046  * usb_register_hotplug_cbs:
1047  *	Register to get callbacks for hotplug events
1048  */
1049 /*ARGSUSED*/
1050 int
1051 usb_register_hotplug_cbs(dev_info_t *dip,
1052     int (*disconnect_event_handler)(dev_info_t *),
1053     int (*reconnect_event_handler)(dev_info_t *))
1054 {
1055 	usba_device_t		*usba_device;
1056 	usba_evdata_t		*evdata;
1057 
1058 	if ((dip == NULL) || (disconnect_event_handler == NULL) ||
1059 	    (reconnect_event_handler == NULL)) {
1060 		USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1061 		    "usb_register_hotplug_cbs: Bad argument(s)");
1062 
1063 		return (USB_FAILURE);
1064 	}
1065 
1066 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1067 	    "usb_register_hotplug_cbs: entry");
1068 
1069 	/*
1070 	 * The event list searches by ddi_get_eventcookie calls below, go
1071 	 * through hubd and so do not apply to host controllers.
1072 	 */
1073 	ASSERT(!usba_is_root_hub(dip));
1074 
1075 	usba_device = usba_get_usba_device(dip);
1076 	evdata = usba_get_evdata(dip);
1077 
1078 	if (usba_device->rm_cookie == NULL) {
1079 		if (ddi_get_eventcookie(dip, DDI_DEVI_REMOVE_EVENT,
1080 		    &usba_device->rm_cookie) != DDI_SUCCESS) {
1081 			USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1082 			    "usb_register_hotplug_cbs: get rm cookie failed");
1083 
1084 			goto fail;
1085 		}
1086 	}
1087 	if (ddi_add_event_handler(dip, usba_device->rm_cookie,
1088 	    (peh_t)disconnect_event_handler,
1089 	    NULL, &evdata->ev_rm_cb_id) != DDI_SUCCESS) {
1090 		USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1091 		    "usb_register_hotplug_cbs: add disconnect handler failed");
1092 
1093 		goto fail;
1094 	}
1095 
1096 	if (usba_device->ins_cookie == NULL) {
1097 		if (ddi_get_eventcookie(dip, DDI_DEVI_INSERT_EVENT,
1098 		    &usba_device->ins_cookie) != DDI_SUCCESS) {
1099 			USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1100 			    "usb_register_hotplug_cbs: get ins cookie failed");
1101 
1102 			goto fail;
1103 		}
1104 	}
1105 	if (ddi_add_event_handler(dip, usba_device->ins_cookie,
1106 	    (peh_t)reconnect_event_handler,
1107 	    NULL, &evdata->ev_ins_cb_id) != DDI_SUCCESS) {
1108 		USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1109 		    "usb_register_hotplug_cbs: add reconnect handler failed");
1110 
1111 		goto fail;
1112 	}
1113 
1114 	mutex_enter(&usba_device->usb_mutex);
1115 	usba_device->usb_client_flags[usba_get_ifno(dip)] |=
1116 	    USBA_CLIENT_FLAG_EV_CBS;
1117 	usba_device->usb_client_ev_cb_list->dip = dip;
1118 	mutex_exit(&usba_device->usb_mutex);
1119 
1120 	return (USB_SUCCESS);
1121 
1122 fail:
1123 	usb_unregister_hotplug_cbs(dip);
1124 
1125 	return (USB_FAILURE);
1126 
1127 }
1128 
1129 
1130 /*
1131  * usb_unregister_hotplug_cbs:
1132  *	Unregister hotplug callbacks
1133  */
1134 /*ARGSUSED*/
1135 void
1136 usb_unregister_hotplug_cbs(dev_info_t *dip)
1137 {
1138 	usb_unregister_event_cbs(dip, NULL);
1139 }
1140 
1141 
1142 /*
1143  * usb_register_event_cbs:
1144  *	Register to get callbacks for USB events
1145  */
1146 /*ARGSUSED*/
1147 int
1148 usb_register_event_cbs(dev_info_t *dip, usb_event_t *usb_evdata,
1149 	usb_flags_t flags)
1150 {
1151 	usba_device_t		*usba_device;
1152 	usba_evdata_t		*evdata;
1153 
1154 	if ((dip == NULL) || (usb_evdata == NULL)) {
1155 
1156 		return (USB_FAILURE);
1157 	}
1158 
1159 	/*
1160 	 * The event list searches by ddi_get_eventcookie calls below, go
1161 	 * through hubd and so do not apply to host controllers.
1162 	 */
1163 	ASSERT(!usba_is_root_hub(dip));
1164 
1165 	usba_device = usba_get_usba_device(dip);
1166 	evdata = usba_get_evdata(dip);
1167 
1168 	if (usb_evdata->disconnect_event_handler != NULL) {
1169 		if (usba_device->rm_cookie == NULL) {
1170 			if (ddi_get_eventcookie(dip, DDI_DEVI_REMOVE_EVENT,
1171 			    &usba_device->rm_cookie) != DDI_SUCCESS) {
1172 
1173 				goto fail;
1174 			}
1175 		}
1176 		if (ddi_add_event_handler(dip, usba_device->rm_cookie,
1177 		    (peh_t)usb_evdata->disconnect_event_handler,
1178 		    NULL, &evdata->ev_rm_cb_id) != DDI_SUCCESS) {
1179 
1180 			goto fail;
1181 		}
1182 	}
1183 	if (usb_evdata->reconnect_event_handler != NULL) {
1184 		if (usba_device->ins_cookie == NULL) {
1185 			if (ddi_get_eventcookie(dip, DDI_DEVI_INSERT_EVENT,
1186 			    &usba_device->ins_cookie) != DDI_SUCCESS) {
1187 
1188 				goto fail;
1189 			}
1190 		}
1191 		if (ddi_add_event_handler(dip, usba_device->ins_cookie,
1192 		    (peh_t)usb_evdata->reconnect_event_handler,
1193 		    NULL, &evdata->ev_ins_cb_id) != DDI_SUCCESS) {
1194 
1195 			goto fail;
1196 		}
1197 	}
1198 	if (usb_evdata->post_resume_event_handler != NULL) {
1199 		if (usba_device->resume_cookie == NULL) {
1200 			if (ddi_get_eventcookie(dip, USBA_POST_RESUME_EVENT,
1201 			    &usba_device->resume_cookie) != DDI_SUCCESS) {
1202 
1203 				goto fail;
1204 			}
1205 		}
1206 		if (ddi_add_event_handler(dip, usba_device->resume_cookie,
1207 		    (peh_t)usb_evdata->post_resume_event_handler,
1208 		    NULL, &evdata->ev_resume_cb_id) != DDI_SUCCESS) {
1209 
1210 			goto fail;
1211 		}
1212 	}
1213 	if (usb_evdata->pre_suspend_event_handler != NULL) {
1214 		if (usba_device->suspend_cookie == NULL) {
1215 			if (ddi_get_eventcookie(dip, USBA_PRE_SUSPEND_EVENT,
1216 			    &usba_device->suspend_cookie) != DDI_SUCCESS) {
1217 
1218 				goto fail;
1219 			}
1220 		}
1221 		if (ddi_add_event_handler(dip, usba_device->suspend_cookie,
1222 		    (peh_t)usb_evdata->pre_suspend_event_handler,
1223 		    NULL, &evdata->ev_suspend_cb_id) != DDI_SUCCESS) {
1224 
1225 			goto fail;
1226 		}
1227 	}
1228 
1229 	mutex_enter(&usba_device->usb_mutex);
1230 	usba_device->usb_client_flags[usba_get_ifno(dip)] |=
1231 	    USBA_CLIENT_FLAG_EV_CBS;
1232 	usba_device->usb_client_ev_cb_list->dip = dip;
1233 	usba_device->usb_client_ev_cb_list->ev_data = usb_evdata;
1234 	mutex_exit(&usba_device->usb_mutex);
1235 
1236 	return (USB_SUCCESS);
1237 
1238 fail:
1239 	usb_unregister_event_cbs(dip, usb_evdata);
1240 
1241 	return (USB_FAILURE);
1242 
1243 }
1244 
1245 
1246 /*
1247  * usb_unregister_event_cbs:
1248  *	Unregister all event callbacks
1249  */
1250 /*ARGSUSED*/
1251 void
1252 usb_unregister_event_cbs(dev_info_t *dip, usb_event_t *usb_evdata)
1253 {
1254 	usba_evdata_t		*evdata;
1255 	usba_device_t		*usba_device = usba_get_usba_device(dip);
1256 
1257 	evdata = usba_get_evdata(dip);
1258 
1259 	if (evdata->ev_rm_cb_id != NULL) {
1260 		(void) ddi_remove_event_handler(evdata->ev_rm_cb_id);
1261 		evdata->ev_rm_cb_id = NULL;
1262 	}
1263 
1264 	if (evdata->ev_ins_cb_id != NULL) {
1265 		(void) ddi_remove_event_handler(evdata->ev_ins_cb_id);
1266 		evdata->ev_ins_cb_id = NULL;
1267 	}
1268 
1269 	if (evdata->ev_suspend_cb_id != NULL) {
1270 		(void) ddi_remove_event_handler(evdata->ev_suspend_cb_id);
1271 		evdata->ev_suspend_cb_id = NULL;
1272 	}
1273 
1274 	if (evdata->ev_resume_cb_id != NULL) {
1275 		(void) ddi_remove_event_handler(evdata->ev_resume_cb_id);
1276 		evdata->ev_resume_cb_id = NULL;
1277 	}
1278 
1279 	mutex_enter(&usba_device->usb_mutex);
1280 	usba_device->usb_client_flags[usba_get_ifno(dip)] &=
1281 	    ~USBA_CLIENT_FLAG_EV_CBS;
1282 	mutex_exit(&usba_device->usb_mutex);
1283 }
1284 
1285 int
1286 usb_reset_device(dev_info_t *dip, usb_dev_reset_lvl_t reset_level)
1287 {
1288 	return (usba_hubdi_reset_device(dip, reset_level));
1289 }
1290 
1291 /*
1292  * usb device driver registration
1293  */
1294 int
1295 usb_register_dev_driver(dev_info_t *dip, usb_dev_driver_callback_t cb)
1296 {
1297 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1298 	    "usb_register_dev_driver: register the specified driver "
1299 	    "in usba: dip = 0x%p", (void *)dip);
1300 
1301 	if (cb != NULL) {
1302 		usb_cap.dip = dip;
1303 		usb_cap.usba_dev_driver_cb = cb;
1304 
1305 		return (USB_SUCCESS);
1306 	}
1307 
1308 	return (USB_FAILURE);
1309 }
1310 
1311 /*
1312  * usb device driver unregistration
1313  */
1314 void
1315 usb_unregister_dev_driver(dev_info_t *dip)
1316 {
1317 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1318 	    "usb_unregister_dev_driver: unregister the registered "
1319 	    "driver: dip =0x%p", (void *)dip);
1320 
1321 	ASSERT(dip == usb_cap.dip);
1322 	usb_cap.dip = NULL;
1323 	usb_cap.usba_dev_driver_cb = NULL;
1324 }
1325