1 /* 2 * Copyright 2010 Sun Microsystems, Inc. All rights reserved. 3 * Use is subject to license terms. 4 */ 5 6 /* 7 * Copyright (c) 2007, 2008 8 * Damien Bergamini <damien.bergamini@free.fr> 9 * 10 * Permission to use, copy, modify, and distribute this software for any 11 * purpose with or without fee is hereby granted, provided that the above 12 * copyright notice and this permission notice appear in all copies. 13 * 14 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 15 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 16 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 17 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 18 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 19 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 20 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 21 */ 22 23 /* 24 * Ralink Technology RT2860 chipset driver 25 * http://www.ralinktech.com/ 26 */ 27 28 #include <sys/types.h> 29 #include <sys/byteorder.h> 30 #include <sys/conf.h> 31 #include <sys/cmn_err.h> 32 #include <sys/stat.h> 33 #include <sys/ddi.h> 34 #include <sys/sunddi.h> 35 #include <sys/strsubr.h> 36 #include <inet/common.h> 37 #include <sys/note.h> 38 #include <sys/stream.h> 39 #include <sys/strsun.h> 40 #include <sys/modctl.h> 41 #include <sys/devops.h> 42 #include <sys/mac_provider.h> 43 #include <sys/mac_wifi.h> 44 #include <sys/net80211.h> 45 #include <sys/net80211_proto.h> 46 #include <sys/varargs.h> 47 #include <sys/pci.h> 48 #include <sys/crypto/common.h> 49 #include <sys/crypto/api.h> 50 #include <inet/wifi_ioctl.h> 51 52 #include "rt2860_reg.h" 53 #include "rt2860_var.h" 54 55 #define RT2860_DBG_80211 (1 << 0) 56 #define RT2860_DBG_DMA (1 << 1) 57 #define RT2860_DBG_EEPROM (1 << 2) 58 #define RT2860_DBG_FW (1 << 3) 59 #define RT2860_DBG_HW (1 << 4) 60 #define RT2860_DBG_INTR (1 << 5) 61 #define RT2860_DBG_RX (1 << 6) 62 #define RT2860_DBG_SCAN (1 << 7) 63 #define RT2860_DBG_TX (1 << 8) 64 #define RT2860_DBG_RADIO (1 << 9) 65 #define RT2860_DBG_RESUME (1 << 10) 66 #define RT2860_DBG_MSG (1 << 11) 67 68 uint32_t rt2860_dbg_flags = 0x0; 69 70 #ifdef DEBUG 71 #define RWN_DEBUG \ 72 rt2860_debug 73 #else 74 #define RWN_DEBUG 75 #endif 76 77 static void *rt2860_soft_state_p = NULL; 78 static uint8_t rt2860_fw_bin [] = { 79 #include "fw-rt2860/rt2860.ucode" 80 }; 81 82 static const struct ieee80211_rateset rt2860_rateset_11b = 83 { 4, { 2, 4, 11, 22 } }; 84 85 static const struct ieee80211_rateset rt2860_rateset_11g = 86 { 12, { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 } }; 87 88 static const struct { 89 uint32_t reg; 90 uint32_t val; 91 } rt2860_def_mac[] = { 92 RT2860_DEF_MAC 93 }; 94 95 static const struct { 96 uint8_t reg; 97 uint8_t val; 98 } rt2860_def_bbp[] = { 99 RT2860_DEF_BBP 100 }; 101 102 static const struct rfprog { 103 uint8_t chan; 104 uint32_t r1, r2, r3, r4; 105 } rt2860_rf2850[] = { 106 RT2860_RF2850 107 }; 108 109 /* 110 * PIO access attributes for registers 111 */ 112 static ddi_device_acc_attr_t rwn_csr_accattr = { 113 DDI_DEVICE_ATTR_V0, 114 DDI_STRUCTURE_LE_ACC, 115 DDI_STRICTORDER_ACC 116 }; 117 118 /* 119 * DMA access attributes for descriptors: NOT to be byte swapped. 120 */ 121 static ddi_device_acc_attr_t rt2860_desc_accattr = { 122 DDI_DEVICE_ATTR_V0, 123 DDI_STRUCTURE_LE_ACC, 124 DDI_STRICTORDER_ACC 125 }; 126 127 static ddi_device_acc_attr_t rt2860_buf_accattr = { 128 DDI_DEVICE_ATTR_V0, 129 DDI_NEVERSWAP_ACC, 130 DDI_STRICTORDER_ACC, 131 DDI_DEFAULT_ACC 132 }; 133 134 /* 135 * Describes the chip's DMA engine 136 */ 137 static ddi_dma_attr_t rt2860_dma_attr = { 138 DMA_ATTR_V0, /* dma_attr version */ 139 0x0, /* dma_attr_addr_lo */ 140 0xffffffffU, /* dma_attr_addr_hi */ 141 0xffffffffU, /* dma_attr_count_max */ 142 16, /* dma_attr_align */ 143 0x00000fff, /* dma_attr_burstsizes */ 144 1, /* dma_attr_minxfer */ 145 0xffffffffU, /* dma_attr_maxxfer */ 146 0xffffffffU, /* dma_attr_seg */ 147 1, /* dma_attr_sgllen */ 148 1, /* dma_attr_granular */ 149 0 /* dma_attr_flags */ 150 }; 151 152 static uint16_t rt2860_eeprom_read(struct rt2860_softc *, uint8_t); 153 static int rt2860_read_eeprom(struct rt2860_softc *); 154 const char *rt2860_get_rf(uint8_t); 155 static int rt2860_alloc_dma_mem(dev_info_t *, ddi_dma_attr_t *, size_t, 156 ddi_device_acc_attr_t *, uint_t, uint_t, struct dma_area *); 157 static void rt2860_free_dma_mem(struct dma_area *); 158 static int rt2860_alloc_tx_ring(struct rt2860_softc *, 159 struct rt2860_tx_ring *); 160 static void rt2860_free_tx_ring(struct rt2860_softc *, 161 struct rt2860_tx_ring *); 162 static int rt2860_alloc_rx_ring(struct rt2860_softc *, 163 struct rt2860_rx_ring *); 164 static void rt2860_free_rx_ring(struct rt2860_softc *, 165 struct rt2860_rx_ring *); 166 static int rt2860_alloc_tx_pool(struct rt2860_softc *); 167 static void rt2860_free_tx_pool(struct rt2860_softc *); 168 static uint16_t rt2860_txtime(int, int, uint32_t); 169 static int rt2860_ack_rate(struct ieee80211com *, int); 170 static int rt2860_send(ieee80211com_t *, mblk_t *, uint8_t); 171 static uint8_t rt2860_maxrssi_chain(struct rt2860_softc *, 172 const struct rt2860_rxwi *); 173 static void rt2860_drain_stats_fifo(struct rt2860_softc *); 174 static void rt2860_tx_intr(struct rt2860_softc *, int); 175 static void rt2860_rx_intr(struct rt2860_softc *); 176 static uint_t rt2860_softintr(caddr_t); 177 static uint_t rt2860_intr(caddr_t); 178 static void rt2860_set_region_4(struct rt2860_softc *, 179 uint32_t, uint32_t, int); 180 static int rt2860_load_microcode(struct rt2860_softc *); 181 static void rt2860_set_macaddr(struct rt2860_softc *, const uint8_t *); 182 static int rt2860_bbp_init(struct rt2860_softc *); 183 static uint8_t rt2860_mcu_bbp_read(struct rt2860_softc *, uint8_t); 184 static void rt2860_mcu_bbp_write(struct rt2860_softc *, uint8_t, uint8_t); 185 static int rt2860_mcu_cmd(struct rt2860_softc *, uint8_t, uint16_t); 186 static void rt2860_rf_write(struct rt2860_softc *, uint8_t, uint32_t); 187 static void rt2860_select_chan_group(struct rt2860_softc *, int); 188 static void rt2860_set_chan(struct rt2860_softc *, 189 struct ieee80211_channel *); 190 static void rt2860_updateprot(struct ieee80211com *); 191 static void rt2860_set_leds(struct rt2860_softc *, uint16_t); 192 static void rt2860_next_scan(void *); 193 static void rt2860_iter_func(void *, struct ieee80211_node *); 194 static void rt2860_updateslot(struct rt2860_softc *); 195 static uint8_t rt2860_rate2mcs(uint8_t); 196 static void rt2860_enable_mrr(struct rt2860_softc *); 197 static void rt2860_set_txpreamble(struct rt2860_softc *); 198 static void rt2860_set_basicrates(struct rt2860_softc *); 199 static void rt2860_set_bssid(struct rt2860_softc *, const uint8_t *); 200 static void rt2860_amrr_node_init(const struct rt2860_amrr *, 201 struct rt2860_amrr_node *); 202 static void rt2860_amrr_choose(struct rt2860_amrr *, 203 struct ieee80211_node *, struct rt2860_amrr_node *); 204 static void rt2860_newassoc(struct ieee80211com *, struct ieee80211_node *, 205 int); 206 static void rt2860_enable_tsf_sync(struct rt2860_softc *); 207 static int rt2860_newstate(struct ieee80211com *, 208 enum ieee80211_state, int); 209 static int rt2860_init(struct rt2860_softc *); 210 static void rt2860_stop(struct rt2860_softc *); 211 static int rt2860_quiesce(dev_info_t *t); 212 213 /* 214 * device operations 215 */ 216 static int rt2860_attach(dev_info_t *, ddi_attach_cmd_t); 217 static int rt2860_detach(dev_info_t *, ddi_detach_cmd_t); 218 219 /* 220 * Module Loading Data & Entry Points 221 */ 222 DDI_DEFINE_STREAM_OPS(rwn_dev_ops, nulldev, nulldev, rt2860_attach, 223 rt2860_detach, nodev, NULL, D_MP, NULL, rt2860_quiesce); 224 225 static struct modldrv rwn_modldrv = { 226 &mod_driverops, /* Type of module. This one is a driver */ 227 "Ralink RT2700/2800 driver v1.2", /* short description */ 228 &rwn_dev_ops /* driver specific ops */ 229 }; 230 231 static struct modlinkage modlinkage = { 232 MODREV_1, 233 (void *)&rwn_modldrv, 234 NULL 235 }; 236 237 static int rt2860_m_stat(void *, uint_t, uint64_t *); 238 static int rt2860_m_start(void *); 239 static void rt2860_m_stop(void *); 240 static int rt2860_m_promisc(void *, boolean_t); 241 static int rt2860_m_multicst(void *, boolean_t, const uint8_t *); 242 static int rt2860_m_unicst(void *, const uint8_t *); 243 static mblk_t *rt2860_m_tx(void *, mblk_t *); 244 static void rt2860_m_ioctl(void *, queue_t *, mblk_t *); 245 static int rt2860_m_setprop(void *arg, const char *pr_name, 246 mac_prop_id_t wldp_pr_num, 247 uint_t wldp_length, const void *wldp_buf); 248 static void rt2860_m_propinfo(void *arg, const char *pr_name, 249 mac_prop_id_t wldp_pr_num, mac_prop_info_handle_t prh); 250 static int rt2860_m_getprop(void *arg, const char *pr_name, 251 mac_prop_id_t wldp_pr_num, uint_t wldp_length, 252 void *wldp_buf); 253 254 static mac_callbacks_t rt2860_m_callbacks = { 255 MC_IOCTL | MC_SETPROP | MC_GETPROP | MC_PROPINFO, 256 rt2860_m_stat, 257 rt2860_m_start, 258 rt2860_m_stop, 259 rt2860_m_promisc, 260 rt2860_m_multicst, 261 rt2860_m_unicst, 262 rt2860_m_tx, 263 NULL, 264 rt2860_m_ioctl, 265 NULL, 266 NULL, 267 NULL, 268 rt2860_m_setprop, 269 rt2860_m_getprop, 270 rt2860_m_propinfo 271 }; 272 273 #ifdef DEBUG 274 void 275 rt2860_debug(uint32_t dbg_flags, const int8_t *fmt, ...) 276 { 277 va_list args; 278 279 if (dbg_flags & rt2860_dbg_flags) { 280 va_start(args, fmt); 281 vcmn_err(CE_CONT, fmt, args); 282 va_end(args); 283 } 284 } 285 #endif 286 287 const char * 288 rt2860_get_rf(uint8_t rev) 289 { 290 switch (rev) { 291 case RT2860_RF_2820: return "RT2820"; 292 case RT2860_RF_2850: return "RT2850"; 293 case RT2860_RF_2720: return "RT2720"; 294 case RT2860_RF_2750: return "RT2750"; 295 default: return "unknown"; 296 } 297 } 298 299 /* 300 * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46, 301 * 93C66 or 93C86). 302 */ 303 static uint16_t 304 rt2860_eeprom_read(struct rt2860_softc *sc, uint8_t addr) 305 { 306 int n; 307 uint16_t val; 308 uint32_t tmp; 309 310 /* clock C once before the first command */ 311 RT2860_EEPROM_CTL(sc, 0); 312 313 RT2860_EEPROM_CTL(sc, RT2860_S); 314 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C); 315 RT2860_EEPROM_CTL(sc, RT2860_S); 316 317 /* write start bit (1) */ 318 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D); 319 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D | RT2860_C); 320 321 /* write READ opcode (10) */ 322 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D); 323 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D | RT2860_C); 324 RT2860_EEPROM_CTL(sc, RT2860_S); 325 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C); 326 327 /* write address (A5-A0 or A7-A0) */ 328 n = ((RT2860_READ(sc, RT2860_PCI_EECTRL) & 0x30) == 0) ? 5 : 7; 329 for (; n >= 0; n--) { 330 RT2860_EEPROM_CTL(sc, RT2860_S | 331 (((addr >> n) & 1) << RT2860_SHIFT_D)); 332 RT2860_EEPROM_CTL(sc, RT2860_S | 333 (((addr >> n) & 1) << RT2860_SHIFT_D) | RT2860_C); 334 } 335 336 RT2860_EEPROM_CTL(sc, RT2860_S); 337 338 /* read data Q15-Q0 */ 339 val = 0; 340 for (n = 15; n >= 0; n--) { 341 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C); 342 tmp = RT2860_READ(sc, RT2860_PCI_EECTRL); 343 val |= ((tmp & RT2860_Q) >> RT2860_SHIFT_Q) << n; 344 RT2860_EEPROM_CTL(sc, RT2860_S); 345 } 346 347 RT2860_EEPROM_CTL(sc, 0); 348 349 /* clear Chip Select and clock C */ 350 RT2860_EEPROM_CTL(sc, RT2860_S); 351 RT2860_EEPROM_CTL(sc, 0); 352 RT2860_EEPROM_CTL(sc, RT2860_C); 353 354 return (val); 355 } 356 357 /* 358 * Add `delta' (signed) to each 4-bit sub-word of a 32-bit word. 359 * Used to adjust per-rate Tx power registers. 360 */ 361 static inline uint32_t 362 b4inc(uint32_t b32, int8_t delta) 363 { 364 int8_t i, b4; 365 366 for (i = 0; i < 8; i++) { 367 b4 = b32 & 0xf; 368 b4 += delta; 369 if (b4 < 0) 370 b4 = 0; 371 else if (b4 > 0xf) 372 b4 = 0xf; 373 b32 = b32 >> 4 | b4 << 28; 374 } 375 return (b32); 376 } 377 378 static int 379 rt2860_read_eeprom(struct rt2860_softc *sc) 380 { 381 struct ieee80211com *ic = &sc->sc_ic; 382 int ridx, ant, i; 383 int8_t delta_2ghz, delta_5ghz; 384 uint16_t val; 385 386 /* read EEPROM version */ 387 val = rt2860_eeprom_read(sc, RT2860_EEPROM_VERSION); 388 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 389 "EEPROM rev=%d, FAE=%d\n", 390 val & 0xff, val >> 8); 391 392 /* read MAC address */ 393 val = rt2860_eeprom_read(sc, RT2860_EEPROM_MAC01); 394 ic->ic_macaddr[0] = val & 0xff; 395 ic->ic_macaddr[1] = val >> 8; 396 val = rt2860_eeprom_read(sc, RT2860_EEPROM_MAC23); 397 ic->ic_macaddr[2] = val & 0xff; 398 ic->ic_macaddr[3] = val >> 8; 399 val = rt2860_eeprom_read(sc, RT2860_EEPROM_MAC45); 400 ic->ic_macaddr[4] = val & 0xff; 401 ic->ic_macaddr[5] = val >> 8; 402 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 403 "MAC address is: %x:%x:%x:%x:%x:%x\n", 404 ic->ic_macaddr[0], ic->ic_macaddr[1], 405 ic->ic_macaddr[2], ic->ic_macaddr[3], 406 ic->ic_macaddr[4], ic->ic_macaddr[5]); 407 408 /* read country code */ 409 val = rt2860_eeprom_read(sc, RT2860_EEPROM_COUNTRY); 410 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 411 "EEPROM region code=0x%04x\n", val); 412 413 /* read default BBP settings */ 414 for (i = 0; i < 8; i++) { 415 val = rt2860_eeprom_read(sc, RT2860_EEPROM_BBP_BASE + i); 416 sc->bbp[i].val = val & 0xff; 417 sc->bbp[i].reg = val >> 8; 418 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 419 "BBP%d=0x%02x\n", 420 sc->bbp[i].reg, sc->bbp[i].val); 421 } 422 423 /* read RF frequency offset from EEPROM */ 424 val = rt2860_eeprom_read(sc, RT2860_EEPROM_FREQ_LEDS); 425 sc->freq = ((val & 0xff) != 0xff) ? val & 0xff : 0; 426 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 427 "EEPROM freq offset %d\n", sc->freq & 0xff); 428 429 if ((sc->leds = val >> 8) != 0xff) { 430 /* read LEDs operating mode */ 431 sc->led[0] = rt2860_eeprom_read(sc, RT2860_EEPROM_LED1); 432 sc->led[1] = rt2860_eeprom_read(sc, RT2860_EEPROM_LED2); 433 sc->led[2] = rt2860_eeprom_read(sc, RT2860_EEPROM_LED3); 434 } else { 435 /* broken EEPROM, use default settings */ 436 sc->leds = 0x01; 437 sc->led[0] = 0x5555; 438 sc->led[1] = 0x2221; 439 sc->led[2] = 0xa9f8; 440 } 441 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 442 "EEPROM LED mode=0x%02x, LEDs=0x%04x/0x%04x/0x%04x\n", 443 sc->leds, sc->led[0], sc->led[1], sc->led[2]); 444 445 /* read RF information */ 446 val = rt2860_eeprom_read(sc, RT2860_EEPROM_ANTENNA); 447 if (val == 0xffff) { 448 /* broken EEPROM, default to RF2820 1T2R */ 449 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 450 "invalid EEPROM antenna info, using default\n"); 451 sc->rf_rev = RT2860_RF_2820; 452 sc->ntxchains = 1; 453 sc->nrxchains = 2; 454 } else { 455 sc->rf_rev = (val >> 8) & 0xf; 456 sc->ntxchains = (val >> 4) & 0xf; 457 sc->nrxchains = val & 0xf; 458 } 459 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 460 "EEPROM RF rev=0x%02x chains=%dT%dR\n", 461 sc->rf_rev, sc->ntxchains, sc->nrxchains); 462 463 /* check if RF supports automatic Tx access gain control */ 464 val = rt2860_eeprom_read(sc, RT2860_EEPROM_CONFIG); 465 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 466 "EEPROM CFG 0x%04x\n", val); 467 if ((val & 0xff) != 0xff) 468 sc->calib_2ghz = sc->calib_5ghz = 0; /* XXX (val >> 1) & 1 */; 469 470 if (sc->sc_flags & RT2860_ADVANCED_PS) { 471 /* read PCIe power save level */ 472 val = rt2860_eeprom_read(sc, RT2860_EEPROM_PCIE_PSLEVEL); 473 if ((val & 0xff) != 0xff) { 474 sc->pslevel = val & 0x3; 475 val = rt2860_eeprom_read(sc, RT2860_EEPROM_REV); 476 if (val >> 8 != 0x92 || !(val & 0x80)) 477 sc->pslevel = MIN(sc->pslevel, 1); 478 RWN_DEBUG(RT2860_DBG_EEPROM, 479 "rwn: rt2860_read_eeprom(): " 480 "EEPROM PCIe PS Level=%d\n", 481 sc->pslevel); 482 } 483 } 484 /* read power settings for 2GHz channels */ 485 for (i = 0; i < 14; i += 2) { 486 val = rt2860_eeprom_read(sc, 487 RT2860_EEPROM_PWR2GHZ_BASE1 + i / 2); 488 sc->txpow1[i + 0] = (int8_t)(val & 0xff); 489 sc->txpow1[i + 1] = (int8_t)(val >> 8); 490 491 val = rt2860_eeprom_read(sc, 492 RT2860_EEPROM_PWR2GHZ_BASE2 + i / 2); 493 sc->txpow2[i + 0] = (int8_t)(val & 0xff); 494 sc->txpow2[i + 1] = (int8_t)(val >> 8); 495 } 496 /* fix broken Tx power entries */ 497 for (i = 0; i < 14; i++) { 498 if (sc->txpow1[i] < 0 || sc->txpow1[i] > 31) 499 sc->txpow1[i] = 5; 500 if (sc->txpow2[i] < 0 || sc->txpow2[i] > 31) 501 sc->txpow2[i] = 5; 502 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 503 "chan %d: power1=%d, power2=%d\n", 504 rt2860_rf2850[i].chan, sc->txpow1[i], sc->txpow2[i]); 505 } 506 /* read power settings for 5GHz channels */ 507 for (i = 0; i < 36; i += 2) { 508 val = rt2860_eeprom_read(sc, 509 RT2860_EEPROM_PWR5GHZ_BASE1 + i / 2); 510 sc->txpow1[i + 14] = (int8_t)(val & 0xff); 511 sc->txpow1[i + 15] = (int8_t)(val >> 8); 512 513 val = rt2860_eeprom_read(sc, 514 RT2860_EEPROM_PWR5GHZ_BASE2 + i / 2); 515 sc->txpow2[i + 14] = (int8_t)(val & 0xff); 516 sc->txpow2[i + 15] = (int8_t)(val >> 8); 517 } 518 /* fix broken Tx power entries */ 519 for (i = 0; i < 36; i++) { 520 if (sc->txpow1[14 + i] < -7 || sc->txpow1[14 + i] > 15) 521 sc->txpow1[14 + i] = 5; 522 if (sc->txpow2[14 + i] < -7 || sc->txpow2[14 + i] > 15) 523 sc->txpow2[14 + i] = 5; 524 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 525 "chan %d: power1=%d, power2=%d\n", 526 rt2860_rf2850[14 + i].chan, sc->txpow1[14 + i], 527 sc->txpow2[14 + i]); 528 } 529 530 /* read Tx power compensation for each Tx rate */ 531 val = rt2860_eeprom_read(sc, RT2860_EEPROM_DELTAPWR); 532 delta_2ghz = delta_5ghz = 0; 533 if ((val & 0xff) != 0xff && (val & 0x80)) { 534 delta_2ghz = val & 0xf; 535 if (!(val & 0x40)) /* negative number */ 536 delta_2ghz = -delta_2ghz; 537 } 538 val >>= 8; 539 if ((val & 0xff) != 0xff && (val & 0x80)) { 540 delta_5ghz = val & 0xf; 541 if (!(val & 0x40)) /* negative number */ 542 delta_5ghz = -delta_5ghz; 543 } 544 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 545 "power compensation=%d (2GHz), %d (5GHz) \n", 546 delta_2ghz, delta_5ghz); 547 548 for (ridx = 0; ridx < 5; ridx++) { 549 uint32_t reg; 550 551 val = rt2860_eeprom_read(sc, RT2860_EEPROM_RPWR + ridx); 552 reg = (uint32_t)val << 16; 553 val = rt2860_eeprom_read(sc, RT2860_EEPROM_RPWR + ridx + 1); 554 reg |= val; 555 556 sc->txpow20mhz[ridx] = reg; 557 sc->txpow40mhz_2ghz[ridx] = b4inc(reg, delta_2ghz); 558 sc->txpow40mhz_5ghz[ridx] = b4inc(reg, delta_5ghz); 559 560 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 561 "ridx %d: power 20MHz=0x%08x, 40MHz/2GHz=0x%08x, " 562 "40MHz/5GHz=0x%08x\n", ridx, sc->txpow20mhz[ridx], 563 sc->txpow40mhz_2ghz[ridx], sc->txpow40mhz_5ghz[ridx]); 564 } 565 566 /* read factory-calibrated samples for temperature compensation */ 567 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI1_2GHZ); 568 sc->tssi_2ghz[0] = val & 0xff; /* [-4] */ 569 sc->tssi_2ghz[1] = val >> 8; /* [-3] */ 570 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI2_2GHZ); 571 sc->tssi_2ghz[2] = val & 0xff; /* [-2] */ 572 sc->tssi_2ghz[3] = val >> 8; /* [-1] */ 573 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI3_2GHZ); 574 sc->tssi_2ghz[4] = val & 0xff; /* [+0] */ 575 sc->tssi_2ghz[5] = val >> 8; /* [+1] */ 576 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI4_2GHZ); 577 sc->tssi_2ghz[6] = val & 0xff; /* [+2] */ 578 sc->tssi_2ghz[7] = val >> 8; /* [+3] */ 579 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI5_2GHZ); 580 sc->tssi_2ghz[8] = val & 0xff; /* [+4] */ 581 sc->step_2ghz = val >> 8; 582 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 583 "TSSI 2GHz: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x " 584 "0x%02x 0x%02x step=%d\n", sc->tssi_2ghz[0], sc->tssi_2ghz[1], 585 sc->tssi_2ghz[2], sc->tssi_2ghz[3], sc->tssi_2ghz[4], 586 sc->tssi_2ghz[5], sc->tssi_2ghz[6], sc->tssi_2ghz[7], 587 sc->tssi_2ghz[8], sc->step_2ghz); 588 /* check that ref value is correct, otherwise disable calibration */ 589 if (sc->tssi_2ghz[4] == 0xff) 590 sc->calib_2ghz = 0; 591 592 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI1_5GHZ); 593 sc->tssi_5ghz[0] = val & 0xff; /* [-4] */ 594 sc->tssi_5ghz[1] = val >> 8; /* [-3] */ 595 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI2_5GHZ); 596 sc->tssi_5ghz[2] = val & 0xff; /* [-2] */ 597 sc->tssi_5ghz[3] = val >> 8; /* [-1] */ 598 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI3_5GHZ); 599 sc->tssi_5ghz[4] = val & 0xff; /* [+0] */ 600 sc->tssi_5ghz[5] = val >> 8; /* [+1] */ 601 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI4_5GHZ); 602 sc->tssi_5ghz[6] = val & 0xff; /* [+2] */ 603 sc->tssi_5ghz[7] = val >> 8; /* [+3] */ 604 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI5_5GHZ); 605 sc->tssi_5ghz[8] = val & 0xff; /* [+4] */ 606 sc->step_5ghz = val >> 8; 607 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 608 "TSSI 5GHz: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x " 609 "0x%02x 0x%02x step=%d\n", sc->tssi_5ghz[0], sc->tssi_5ghz[1], 610 sc->tssi_5ghz[2], sc->tssi_5ghz[3], sc->tssi_5ghz[4], 611 sc->tssi_5ghz[5], sc->tssi_5ghz[6], sc->tssi_5ghz[7], 612 sc->tssi_5ghz[8], sc->step_5ghz); 613 /* check that ref value is correct, otherwise disable calibration */ 614 if (sc->tssi_5ghz[4] == 0xff) 615 sc->calib_5ghz = 0; 616 617 /* read RSSI offsets and LNA gains from EEPROM */ 618 val = rt2860_eeprom_read(sc, RT2860_EEPROM_RSSI1_2GHZ); 619 sc->rssi_2ghz[0] = val & 0xff; /* Ant A */ 620 sc->rssi_2ghz[1] = val >> 8; /* Ant B */ 621 val = rt2860_eeprom_read(sc, RT2860_EEPROM_RSSI2_2GHZ); 622 sc->rssi_2ghz[2] = val & 0xff; /* Ant C */ 623 sc->lna[2] = val >> 8; /* channel group 2 */ 624 625 val = rt2860_eeprom_read(sc, RT2860_EEPROM_RSSI1_5GHZ); 626 sc->rssi_5ghz[0] = val & 0xff; /* Ant A */ 627 sc->rssi_5ghz[1] = val >> 8; /* Ant B */ 628 val = rt2860_eeprom_read(sc, RT2860_EEPROM_RSSI2_5GHZ); 629 sc->rssi_5ghz[2] = val & 0xff; /* Ant C */ 630 sc->lna[3] = val >> 8; /* channel group 3 */ 631 632 val = rt2860_eeprom_read(sc, RT2860_EEPROM_LNA); 633 sc->lna[0] = val & 0xff; /* channel group 0 */ 634 sc->lna[1] = val >> 8; /* channel group 1 */ 635 636 /* fix broken 5GHz LNA entries */ 637 if (sc->lna[2] == 0 || sc->lna[2] == 0xff) { 638 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 639 "invalid LNA for channel group %d\n", 2); 640 sc->lna[2] = sc->lna[1]; 641 } 642 if (sc->lna[3] == 0 || sc->lna[3] == 0xff) { 643 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 644 "invalid LNA for channel group %d\n", 3); 645 sc->lna[3] = sc->lna[1]; 646 } 647 648 /* fix broken RSSI offset entries */ 649 for (ant = 0; ant < 3; ant++) { 650 if (sc->rssi_2ghz[ant] < -10 || sc->rssi_2ghz[ant] > 10) { 651 RWN_DEBUG(RT2860_DBG_EEPROM, 652 "rwn: rt2860_read_eeprom(): " 653 "invalid RSSI%d offset: %d (2GHz)\n", 654 ant + 1, sc->rssi_2ghz[ant]); 655 sc->rssi_2ghz[ant] = 0; 656 } 657 if (sc->rssi_5ghz[ant] < -10 || sc->rssi_5ghz[ant] > 10) { 658 RWN_DEBUG(RT2860_DBG_EEPROM, 659 "rwn: rt2860_read_eeprom(): " 660 "invalid RSSI%d offset: %d (2GHz)\n", 661 ant + 1, sc->rssi_5ghz[ant]); 662 sc->rssi_5ghz[ant] = 0; 663 } 664 } 665 666 return (RT2860_SUCCESS); 667 } 668 669 /* 670 * Allocate an DMA memory and a DMA handle for accessing it 671 */ 672 static int 673 rt2860_alloc_dma_mem(dev_info_t *devinfo, ddi_dma_attr_t *dma_attr, 674 size_t memsize, ddi_device_acc_attr_t *attr_p, uint_t alloc_flags, 675 uint_t bind_flags, struct dma_area *dma_p) 676 { 677 int err; 678 679 /* 680 * Allocate handle 681 */ 682 err = ddi_dma_alloc_handle(devinfo, dma_attr, 683 DDI_DMA_SLEEP, NULL, &dma_p->dma_hdl); 684 if (err != DDI_SUCCESS) { 685 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rwn_allo_dma_mem(): " 686 "failed to alloc handle\n"); 687 goto fail1; 688 } 689 690 /* 691 * Allocate memory 692 */ 693 err = ddi_dma_mem_alloc(dma_p->dma_hdl, memsize, attr_p, 694 alloc_flags, DDI_DMA_SLEEP, NULL, &dma_p->mem_va, 695 &dma_p->alength, &dma_p->acc_hdl); 696 if (err != DDI_SUCCESS) { 697 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rwn_alloc_dma_mem(): " 698 "failed to alloc mem\n"); 699 goto fail2; 700 } 701 702 /* 703 * Bind the two together 704 */ 705 err = ddi_dma_addr_bind_handle(dma_p->dma_hdl, NULL, 706 dma_p->mem_va, dma_p->alength, bind_flags, 707 DDI_DMA_SLEEP, NULL, &dma_p->cookie, &dma_p->ncookies); 708 if (err != DDI_DMA_MAPPED) { 709 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rwn_alloc_dma_mem(): " 710 "failed to bind handle\n"); 711 goto fail3; 712 } 713 714 if (dma_p->ncookies != 1) { 715 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rwn_alloc_dma_mem(): " 716 "failed to alloc cookies\n"); 717 goto fail4; 718 } 719 720 dma_p->nslots = ~0U; 721 dma_p->size = ~0U; 722 dma_p->token = ~0U; 723 dma_p->offset = 0; 724 return (DDI_SUCCESS); 725 726 fail4: 727 (void) ddi_dma_unbind_handle(dma_p->dma_hdl); 728 fail3: 729 ddi_dma_mem_free(&dma_p->acc_hdl); 730 fail2: 731 ddi_dma_free_handle(&dma_p->dma_hdl); 732 fail1: 733 return (err); 734 } 735 736 static void 737 rt2860_free_dma_mem(struct dma_area *dma_p) 738 { 739 if (dma_p->dma_hdl != NULL) { 740 (void) ddi_dma_unbind_handle(dma_p->dma_hdl); 741 if (dma_p->acc_hdl != NULL) { 742 ddi_dma_mem_free(&dma_p->acc_hdl); 743 dma_p->acc_hdl = NULL; 744 } 745 ddi_dma_free_handle(&dma_p->dma_hdl); 746 dma_p->ncookies = 0; 747 dma_p->dma_hdl = NULL; 748 } 749 } 750 751 /*ARGSUSED*/ 752 static int 753 rt2860_alloc_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring) 754 { 755 int size, err; 756 757 size = RT2860_TX_RING_COUNT * sizeof (struct rt2860_txd); 758 759 err = rt2860_alloc_dma_mem(sc->sc_dev, &rt2860_dma_attr, size, 760 &rt2860_desc_accattr, DDI_DMA_CONSISTENT, 761 DDI_DMA_RDWR | DDI_DMA_CONSISTENT, 762 &ring->txdesc_dma); 763 if (err != DDI_SUCCESS) { 764 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rt2860_alloc_tx_ring(): " 765 "failed to alloc dma mem\n"); 766 goto fail1; 767 } 768 769 ring->txd = (struct rt2860_txd *)ring->txdesc_dma.mem_va; 770 ring->paddr = ring->txdesc_dma.cookie.dmac_address; 771 772 ring->cur = 0; 773 ring->next = 0; 774 ring->queued = 0; 775 776 (void) bzero(ring->txd, size); 777 RT2860_DMA_SYNC(ring->txdesc_dma, DDI_DMA_SYNC_FORDEV); 778 return (DDI_SUCCESS); 779 fail1: 780 return (err); 781 } 782 783 void 784 rt2860_reset_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring) 785 { 786 struct rt2860_tx_data *data; 787 int i; 788 789 for (i = 0; i < RT2860_TX_RING_COUNT; i++) { 790 ring->txd[i].sdl0 &= ~LE_16(RT2860_TX_DDONE); 791 792 if ((data = ring->data[i]) == NULL) 793 continue; /* nothing mapped in this slot */ 794 795 /* by pass if it's quiesced */ 796 if (!(sc->sc_flags & RT2860_F_QUIESCE)) 797 RT2860_DMA_SYNC(data->txbuf_dma, DDI_DMA_SYNC_FORDEV); 798 799 if (data->ni != NULL) { 800 ieee80211_free_node(data->ni); 801 data->ni = NULL; /* node already freed */ 802 } 803 804 SLIST_INSERT_HEAD(&sc->data_pool, data, next); 805 ring->data[i] = NULL; 806 } 807 808 /* by pass if it's quiesced */ 809 if (!(sc->sc_flags & RT2860_F_QUIESCE)) 810 RT2860_DMA_SYNC(ring->txdesc_dma, DDI_DMA_SYNC_FORDEV); 811 812 ring->queued = 0; 813 ring->cur = ring->next = 0; 814 } 815 816 /*ARGSUSED*/ 817 static void 818 rt2860_free_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring) 819 { 820 if (ring->txd != NULL) { 821 rt2860_free_dma_mem(&ring->txdesc_dma); 822 } 823 } 824 825 static int 826 rt2860_alloc_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring) 827 { 828 struct rt2860_rx_data *data; 829 struct rt2860_rxd *rxd; 830 int i, err, size, datalen; 831 832 size = RT2860_RX_RING_COUNT * sizeof (struct rt2860_rxd); 833 834 err = rt2860_alloc_dma_mem(sc->sc_dev, &rt2860_dma_attr, size, 835 &rt2860_desc_accattr, DDI_DMA_CONSISTENT, 836 DDI_DMA_RDWR | DDI_DMA_CONSISTENT, 837 &ring->rxdesc_dma); 838 if (err != DDI_SUCCESS) { 839 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rt2860_alloc_rx_ring(): " 840 "failed to alloc dma mem\n"); 841 goto fail1; 842 } 843 844 ring->rxd = (struct rt2860_rxd *)ring->rxdesc_dma.mem_va; 845 ring->paddr = ring->rxdesc_dma.cookie.dmac_address; 846 bzero(ring->rxd, size); 847 848 /* 849 * Pre-allocate Rx buffers and populate Rx ring. 850 */ 851 datalen = RT2860_RX_RING_COUNT * sizeof (struct rt2860_rx_data); 852 bzero(ring->data, datalen); 853 for (i = 0; i < RT2860_RX_RING_COUNT; i++) { 854 rxd = &ring->rxd[i]; 855 data = &ring->data[i]; 856 /* alloc DMA memory */ 857 (void) rt2860_alloc_dma_mem(sc->sc_dev, &rt2860_dma_attr, 858 sc->sc_dmabuf_size, 859 &rt2860_buf_accattr, 860 DDI_DMA_STREAMING, 861 DDI_DMA_READ | DDI_DMA_STREAMING, 862 &data->rxbuf_dma); 863 rxd->sdp0 = LE_32(data->rxbuf_dma.cookie.dmac_address); 864 rxd->sdl0 = LE_16(sc->sc_dmabuf_size); 865 } 866 867 ring->cur = 0; 868 869 RT2860_DMA_SYNC(ring->rxdesc_dma, DDI_DMA_SYNC_FORDEV); 870 return (DDI_SUCCESS); 871 fail2: 872 rt2860_free_dma_mem(&ring->rxdesc_dma); 873 fail1: 874 return (err); 875 } 876 877 /*ARGSUSED*/ 878 void 879 rt2860_reset_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring) 880 { 881 int i; 882 883 for (i = 0; i < RT2860_RX_RING_COUNT; i++) 884 ring->rxd[i].sdl0 &= ~LE_16(RT2860_RX_DDONE); 885 886 RT2860_DMA_SYNC(ring->rxdesc_dma, DDI_DMA_SYNC_FORDEV); 887 888 ring->cur = 0; 889 } 890 891 /*ARGSUSED*/ 892 static void 893 rt2860_free_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring) 894 { 895 struct rt2860_rx_data *data; 896 int i, count; 897 898 if (ring->rxd != NULL) 899 rt2860_free_dma_mem(&ring->rxdesc_dma); 900 901 count = RT2860_RX_RING_COUNT; 902 if (ring->data != NULL) { 903 for (i = 0; i < count; i++) { 904 data = &ring->data[i]; 905 rt2860_free_dma_mem(&data->rxbuf_dma); 906 } 907 } 908 } 909 910 static int 911 rt2860_alloc_tx_pool(struct rt2860_softc *sc) 912 { 913 struct rt2860_tx_data *data; 914 int i, err, size; 915 916 size = RT2860_TX_POOL_COUNT * sizeof (struct rt2860_txwi); 917 918 /* init data_pool early in case of failure.. */ 919 SLIST_INIT(&sc->data_pool); 920 921 err = rt2860_alloc_dma_mem(sc->sc_dev, &rt2860_dma_attr, size, 922 &rt2860_desc_accattr, DDI_DMA_CONSISTENT, 923 DDI_DMA_RDWR | DDI_DMA_CONSISTENT, 924 &sc->txpool_dma); 925 if (err != DDI_SUCCESS) { 926 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rt2860_alloc_tx_pool(): " 927 "failed to alloc dma mem\n"); 928 goto fail1; 929 } 930 931 sc->txwi = (struct rt2860_txwi *)sc->txpool_dma.mem_va; 932 (void) bzero(sc->txwi, size); 933 RT2860_DMA_SYNC(sc->txpool_dma, DDI_DMA_SYNC_FORDEV); 934 935 for (i = 0; i < RT2860_TX_POOL_COUNT; i++) { 936 data = &sc->data[i]; 937 938 err = rt2860_alloc_dma_mem(sc->sc_dev, &rt2860_dma_attr, 939 sc->sc_dmabuf_size, 940 &rt2860_buf_accattr, DDI_DMA_CONSISTENT, 941 DDI_DMA_RDWR | DDI_DMA_CONSISTENT, 942 &data->txbuf_dma); 943 if (err != DDI_SUCCESS) { 944 RWN_DEBUG(RT2860_DBG_DMA, 945 "rwn: rt2860_alloc_tx_pool(): " 946 "failed to alloc dma mem\n"); 947 goto fail2; 948 } 949 data->txwi = &sc->txwi[i]; 950 data->paddr = sc->txpool_dma.cookie.dmac_address + 951 i * sizeof (struct rt2860_txwi); 952 953 SLIST_INSERT_HEAD(&sc->data_pool, data, next); 954 } 955 return (DDI_SUCCESS); 956 fail2: 957 rt2860_free_dma_mem(&sc->txpool_dma); 958 fail1: 959 return (err); 960 } 961 962 static void 963 rt2860_free_tx_pool(struct rt2860_softc *sc) 964 { 965 struct rt2860_tx_data *data; 966 int i; 967 968 if (sc->txwi != NULL) { 969 rt2860_free_dma_mem(&sc->txpool_dma); 970 } 971 972 for (i = 0; i < RT2860_TX_POOL_COUNT; i++) { 973 data = &sc->data[i]; 974 rt2860_free_dma_mem(&data->txbuf_dma); 975 } 976 } 977 978 /* quickly determine if a given rate is CCK or OFDM */ 979 #define RT2860_RATE_IS_OFDM(rate) ((rate) >= 12 && (rate) != 22) 980 981 #define RT2860_ACK_SIZE 14 /* 10 + 4(FCS) */ 982 #define RT2860_SIFS_TIME 10 983 984 static uint8_t 985 rt2860_rate2mcs(uint8_t rate) 986 { 987 switch (rate) { 988 /* CCK rates */ 989 case 2: 990 return (0); 991 case 4: 992 return (1); 993 case 11: 994 return (2); 995 case 22: 996 return (3); 997 /* OFDM rates */ 998 case 12: 999 return (0); 1000 case 18: 1001 return (1); 1002 case 24: 1003 return (2); 1004 case 36: 1005 return (3); 1006 case 48: 1007 return (4); 1008 case 72: 1009 return (5); 1010 case 96: 1011 return (6); 1012 case 108: 1013 return (7); 1014 } 1015 1016 return (0); /* shouldn't get there */ 1017 } 1018 1019 /* 1020 * Return the expected ack rate for a frame transmitted at rate `rate'. 1021 */ 1022 static int 1023 rt2860_ack_rate(struct ieee80211com *ic, int rate) 1024 { 1025 switch (rate) { 1026 /* CCK rates */ 1027 case 2: 1028 return (2); 1029 case 4: 1030 case 11: 1031 case 22: 1032 return ((ic->ic_curmode == IEEE80211_MODE_11B) ? 4 : rate); 1033 1034 /* OFDM rates */ 1035 case 12: 1036 case 18: 1037 return (12); 1038 case 24: 1039 case 36: 1040 return (24); 1041 case 48: 1042 case 72: 1043 case 96: 1044 case 108: 1045 return (48); 1046 } 1047 1048 /* default to 1Mbps */ 1049 return (2); 1050 } 1051 1052 1053 /* 1054 * Compute the duration (in us) needed to transmit `len' bytes at rate `rate'. 1055 * The function automatically determines the operating mode depending on the 1056 * given rate. `flags' indicates whether short preamble is in use or not. 1057 */ 1058 static uint16_t 1059 rt2860_txtime(int len, int rate, uint32_t flags) 1060 { 1061 uint16_t txtime; 1062 1063 if (RT2860_RATE_IS_OFDM(rate)) { 1064 /* IEEE Std 802.11g-2003, pp. 44 */ 1065 txtime = (8 + 4 * len + 3 + rate - 1) / rate; 1066 txtime = 16 + 4 + 4 * txtime + 6; 1067 } else { 1068 /* IEEE Std 802.11b-1999, pp. 28 */ 1069 txtime = (16 * len + rate - 1) / rate; 1070 if (rate != 2 && (flags & IEEE80211_F_SHPREAMBLE)) 1071 txtime += 72 + 24; 1072 else 1073 txtime += 144 + 48; 1074 } 1075 return (txtime); 1076 } 1077 1078 static int 1079 rt2860_send(ieee80211com_t *ic, mblk_t *mp, uint8_t type) 1080 { 1081 struct rt2860_softc *sc = (struct rt2860_softc *)ic; 1082 struct rt2860_tx_ring *ring; 1083 struct rt2860_tx_data *data; 1084 struct rt2860_txd *txd; 1085 struct rt2860_txwi *txwi; 1086 struct ieee80211_frame *wh; 1087 struct ieee80211_node *ni; 1088 int qid, off, rate, err; 1089 int mblen, pktlen; 1090 uint_t hdrlen; 1091 uint8_t mcs, pid, qsel; 1092 uint16_t dur; 1093 mblk_t *m, *m0; 1094 1095 err = DDI_SUCCESS; 1096 1097 mutex_enter(&sc->sc_txlock); 1098 if (RT2860_IS_SUSPEND(sc)) { 1099 err = ENXIO; 1100 goto fail1; 1101 } 1102 1103 if ((type & IEEE80211_FC0_TYPE_MASK) != 1104 IEEE80211_FC0_TYPE_DATA) 1105 qid = sc->mgtqid; 1106 else 1107 qid = EDCA_AC_BE; 1108 ring = &sc->txq[qid]; 1109 1110 if (SLIST_EMPTY(&sc->data_pool) || (ring->queued > 15)) { 1111 sc->sc_need_sched = 1; 1112 sc->sc_tx_nobuf++; 1113 err = ENOMEM; 1114 goto fail1; 1115 } 1116 1117 /* the data pool contains at least one element, pick the first */ 1118 data = SLIST_FIRST(&sc->data_pool); 1119 1120 m = allocb(msgdsize(mp) + 32, BPRI_MED); 1121 if (m == NULL) { 1122 RWN_DEBUG(RT2860_DBG_TX, "rwn: rt2860_send():" 1123 "rt2860_mgmt_send: can't alloc mblk.\n"); 1124 err = DDI_FAILURE; 1125 goto fail1; 1126 } 1127 1128 for (off = 0, m0 = mp; m0 != NULL; m0 = m0->b_cont) { 1129 mblen = MBLKL(m0); 1130 (void) bcopy(m0->b_rptr, m->b_rptr + off, mblen); 1131 off += mblen; 1132 } 1133 m->b_wptr += off; 1134 1135 wh = (struct ieee80211_frame *)m->b_rptr; 1136 ni = ieee80211_find_txnode(ic, wh->i_addr1); 1137 if (ni == NULL) { 1138 err = DDI_FAILURE; 1139 sc->sc_tx_err++; 1140 goto fail2; 1141 } 1142 1143 if ((type & IEEE80211_FC0_TYPE_MASK) == 1144 IEEE80211_FC0_TYPE_DATA) 1145 (void) ieee80211_encap(ic, m, ni); 1146 1147 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 1148 struct ieee80211_key *k; 1149 k = ieee80211_crypto_encap(ic, m); 1150 if (k == NULL) { 1151 sc->sc_tx_err++; 1152 err = DDI_FAILURE; 1153 goto fail3; 1154 } 1155 /* packet header may have moved, reset our local pointer */ 1156 wh = (struct ieee80211_frame *)m->b_rptr; 1157 } 1158 pktlen = msgdsize(m); 1159 hdrlen = sizeof (*wh); 1160 1161 /* pickup a rate */ 1162 if (IEEE80211_IS_MULTICAST(wh->i_addr1) || 1163 ((type & IEEE80211_FC0_TYPE_MASK) != 1164 IEEE80211_FC0_TYPE_DATA)) 1165 rate = ni->in_rates.ir_rates[0]; 1166 else { 1167 if (ic->ic_fixed_rate != IEEE80211_FIXED_RATE_NONE) 1168 rate = ic->ic_fixed_rate; 1169 else 1170 rate = ni->in_rates.ir_rates[ni->in_txrate]; 1171 } 1172 rate &= IEEE80211_RATE_VAL; 1173 1174 /* get MCS code from rate */ 1175 mcs = rt2860_rate2mcs(rate); 1176 1177 /* setup TX Wireless Information */ 1178 txwi = data->txwi; 1179 (void) bzero(txwi, sizeof (struct rt2860_txwi)); 1180 txwi->wcid = (type == IEEE80211_FC0_TYPE_DATA) ? 1181 RT2860_AID2WCID(ni->in_associd) : 0xff; 1182 txwi->len = LE_16(pktlen); 1183 if (!RT2860_RATE_IS_OFDM(rate)) { 1184 txwi->phy = LE_16(RT2860_PHY_CCK); 1185 if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1186 mcs |= RT2860_PHY_SHPRE; 1187 } else 1188 txwi->phy = LE_16(RT2860_PHY_OFDM); 1189 txwi->phy |= LE_16(mcs); 1190 1191 /* 1192 * We store the MCS code into the driver-private PacketID field. 1193 * The PacketID is latched into TX_STAT_FIFO when Tx completes so 1194 * that we know at which initial rate the frame was transmitted. 1195 * We add 1 to the MCS code because setting the PacketID field to 1196 * 0 means that we don't want feedback in TX_STAT_FIFO. 1197 */ 1198 pid = (mcs + 1) & 0xf; 1199 txwi->len |= LE_16(pid << RT2860_TX_PID_SHIFT); 1200 1201 /* check if RTS/CTS or CTS-to-self protection is required */ 1202 if (!IEEE80211_IS_MULTICAST(wh->i_addr1) && 1203 (pktlen + IEEE80211_CRC_LEN > ic->ic_rtsthreshold || 1204 ((ic->ic_flags & 1205 IEEE80211_F_USEPROT) && RT2860_RATE_IS_OFDM(rate)))) 1206 txwi->txop = RT2860_TX_TXOP_HT; 1207 else 1208 txwi->txop = RT2860_TX_TXOP_BACKOFF; 1209 1210 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1211 txwi->xflags |= RT2860_TX_ACK; 1212 1213 dur = rt2860_txtime(RT2860_ACK_SIZE, rt2860_ack_rate(ic, rate), 1214 ic->ic_flags) + sc->sifs; 1215 *(uint16_t *)wh->i_dur = LE_16(dur); 1216 } 1217 1218 /* copy and trim 802.11 header */ 1219 bcopy(wh, &txwi->wh, hdrlen); 1220 m->b_rptr += hdrlen; 1221 bcopy(m->b_rptr, data->txbuf_dma.mem_va, pktlen - hdrlen); 1222 1223 qsel = (qid < EDCA_NUM_AC) ? RT2860_TX_QSEL_EDCA : RT2860_TX_QSEL_MGMT; 1224 1225 /* first segment is TXWI + 802.11 header */ 1226 txd = &ring->txd[ring->cur]; 1227 txd->sdp0 = LE_32(data->paddr); 1228 txd->sdl0 = LE_16(16 + hdrlen); 1229 txd->flags = qsel; 1230 1231 /* finalize last segment */ 1232 txd->sdp1 = LE_32(data->txbuf_dma.cookie.dmac_address); 1233 txd->sdl1 = LE_16(pktlen - hdrlen | RT2860_TX_LS1); 1234 1235 /* remove from the free pool and link it into the SW Tx slot */ 1236 SLIST_REMOVE_HEAD(&sc->data_pool, next); 1237 data->ni = ieee80211_ref_node(ni); 1238 ring->data[ring->cur] = data; 1239 1240 (void) ddi_dma_sync(sc->txpool_dma.dma_hdl, 1241 _PTRDIFF(txwi, sc->txwi), 1242 (hdrlen + 16 + 2), 1243 DDI_DMA_SYNC_FORDEV); 1244 RT2860_DMA_SYNC(data->txbuf_dma, DDI_DMA_SYNC_FORDEV); 1245 RT2860_DMA_SYNC(ring->txdesc_dma, DDI_DMA_SYNC_FORDEV); 1246 1247 RWN_DEBUG(RT2860_DBG_TX, "rwn: rt2860_send():" 1248 "sending frame qid=%d wcid=%d rate=%d cur = %x\n", 1249 qid, txwi->wcid, rate, ring->cur); 1250 1251 ring->queued++; 1252 ring->cur = (ring->cur + 1) % RT2860_TX_RING_COUNT; 1253 1254 /* kick Tx */ 1255 RT2860_WRITE(sc, RT2860_TX_CTX_IDX(qid), ring->cur); 1256 1257 sc->sc_tx_timer = 5; 1258 1259 ic->ic_stats.is_tx_frags++; 1260 ic->ic_stats.is_tx_bytes += pktlen; 1261 1262 fail3: 1263 ieee80211_free_node(ni); 1264 fail2: 1265 freemsg(m); 1266 fail1: 1267 if ((type & IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_DATA || 1268 err == DDI_SUCCESS) 1269 freemsg(mp); 1270 mutex_exit(&sc->sc_txlock); 1271 return (err); 1272 } 1273 1274 /* 1275 * This function is called periodically (every 200ms) during scanning to 1276 * switch from one channel to another. 1277 */ 1278 static void 1279 rt2860_next_scan(void *arg) 1280 { 1281 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 1282 struct ieee80211com *ic = &sc->sc_ic; 1283 1284 if (ic->ic_state == IEEE80211_S_SCAN) 1285 (void) ieee80211_next_scan(ic); 1286 } 1287 1288 static void 1289 rt2860_updateslot(struct rt2860_softc *sc) 1290 { 1291 struct ieee80211com *ic = &sc->sc_ic; 1292 uint32_t tmp; 1293 1294 tmp = RT2860_READ(sc, RT2860_BKOFF_SLOT_CFG); 1295 tmp &= ~0xff; 1296 tmp |= (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20; 1297 RT2860_WRITE(sc, RT2860_BKOFF_SLOT_CFG, tmp); 1298 } 1299 1300 static void 1301 rt2860_iter_func(void *arg, struct ieee80211_node *ni) 1302 { 1303 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 1304 uint8_t wcid; 1305 1306 wcid = RT2860_AID2WCID(ni->in_associd); 1307 rt2860_amrr_choose(&sc->amrr, ni, &sc->amn[wcid]); 1308 } 1309 1310 static void 1311 rt2860_updatestats(void *arg) 1312 { 1313 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 1314 struct ieee80211com *ic = &sc->sc_ic; 1315 1316 if (ic->ic_opmode == IEEE80211_M_STA) 1317 rt2860_iter_func(sc, ic->ic_bss); 1318 else 1319 ieee80211_iterate_nodes(&ic->ic_sta, rt2860_iter_func, arg); 1320 1321 sc->sc_rssadapt_id = timeout(rt2860_updatestats, (void *)sc, 1322 drv_usectohz(500 * 1000)); 1323 } 1324 1325 static void 1326 rt2860_enable_mrr(struct rt2860_softc *sc) 1327 { 1328 #define CCK(mcs) (mcs) 1329 #define OFDM(mcs) ((uint32_t)1 << 3 | (mcs)) 1330 RT2860_WRITE(sc, RT2860_LG_FBK_CFG0, 1331 OFDM(6) << 28 | /* 54->48 */ 1332 OFDM(5) << 24 | /* 48->36 */ 1333 OFDM(4) << 20 | /* 36->24 */ 1334 OFDM(3) << 16 | /* 24->18 */ 1335 OFDM(2) << 12 | /* 18->12 */ 1336 OFDM(1) << 8 | /* 12-> 9 */ 1337 OFDM(0) << 4 | /* 9-> 6 */ 1338 OFDM(0)); /* 6-> 6 */ 1339 1340 RT2860_WRITE(sc, RT2860_LG_FBK_CFG1, 1341 CCK(2) << 12 | /* 11->5.5 */ 1342 CCK(1) << 8 | /* 5.5-> 2 */ 1343 CCK(0) << 4 | /* 2-> 1 */ 1344 CCK(0)); /* 1-> 1 */ 1345 #undef OFDM 1346 #undef CCK 1347 } 1348 1349 static void 1350 rt2860_set_txpreamble(struct rt2860_softc *sc) 1351 { 1352 uint32_t tmp; 1353 1354 tmp = RT2860_READ(sc, RT2860_AUTO_RSP_CFG); 1355 tmp &= ~RT2860_CCK_SHORT_EN; 1356 if (sc->sc_ic.ic_flags & IEEE80211_F_SHPREAMBLE) 1357 tmp |= RT2860_CCK_SHORT_EN; 1358 RT2860_WRITE(sc, RT2860_AUTO_RSP_CFG, tmp); 1359 } 1360 1361 static void 1362 rt2860_set_bssid(struct rt2860_softc *sc, const uint8_t *bssid) 1363 { 1364 RT2860_WRITE(sc, RT2860_MAC_BSSID_DW0, 1365 bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24); 1366 RT2860_WRITE(sc, RT2860_MAC_BSSID_DW1, 1367 bssid[4] | bssid[5] << 8); 1368 } 1369 1370 static void 1371 rt2860_set_basicrates(struct rt2860_softc *sc) 1372 { 1373 struct ieee80211com *ic = &sc->sc_ic; 1374 1375 /* set basic rates mask */ 1376 if (ic->ic_curmode == IEEE80211_MODE_11B) 1377 RT2860_WRITE(sc, RT2860_LEGACY_BASIC_RATE, 0x003); 1378 else if (ic->ic_curmode == IEEE80211_MODE_11A) 1379 RT2860_WRITE(sc, RT2860_LEGACY_BASIC_RATE, 0x150); 1380 else /* 11g */ 1381 RT2860_WRITE(sc, RT2860_LEGACY_BASIC_RATE, 0x15f); 1382 } 1383 1384 static void 1385 rt2860_amrr_node_init(const struct rt2860_amrr *amrr, 1386 struct rt2860_amrr_node *amn) 1387 { 1388 amn->amn_success = 0; 1389 amn->amn_recovery = 0; 1390 amn->amn_txcnt = amn->amn_retrycnt = 0; 1391 amn->amn_success_threshold = amrr->amrr_min_success_threshold; 1392 } 1393 1394 static void 1395 rt2860_amrr_choose(struct rt2860_amrr *amrr, struct ieee80211_node *ni, 1396 struct rt2860_amrr_node *amn) 1397 { 1398 #define RV(rate) ((rate) & IEEE80211_RATE_VAL) 1399 #define is_success(amn) \ 1400 ((amn)->amn_retrycnt < (amn)->amn_txcnt / 10) 1401 #define is_failure(amn) \ 1402 ((amn)->amn_retrycnt > (amn)->amn_txcnt / 3) 1403 #define is_enough(amn) \ 1404 ((amn)->amn_txcnt > 10) 1405 #define is_min_rate(ni) \ 1406 ((ni)->in_txrate == 0) 1407 #define is_max_rate(ni) \ 1408 ((ni)->in_txrate == (ni)->in_rates.ir_nrates - 1) 1409 #define increase_rate(ni) \ 1410 ((ni)->in_txrate++) 1411 #define decrease_rate(ni) \ 1412 ((ni)->in_txrate--) 1413 #define reset_cnt(amn) \ 1414 { (amn)->amn_txcnt = (amn)->amn_retrycnt = 0; } 1415 1416 int need_change = 0; 1417 1418 if (is_success(amn) && is_enough(amn)) { 1419 amn->amn_success++; 1420 if (amn->amn_success >= amn->amn_success_threshold && 1421 !is_max_rate(ni)) { 1422 amn->amn_recovery = 1; 1423 amn->amn_success = 0; 1424 increase_rate(ni); 1425 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_amrr_choose(): " 1426 "increase rate = %d, #tx = %d, #retries = %d\n", 1427 RV(ni->in_rates.ir_rates[ni->in_txrate]), 1428 amn->amn_txcnt, amn->amn_retrycnt); 1429 need_change = 1; 1430 } else { 1431 amn->amn_recovery = 0; 1432 } 1433 } else if (is_failure(amn)) { 1434 amn->amn_success = 0; 1435 if (!is_min_rate(ni)) { 1436 if (amn->amn_recovery) { 1437 amn->amn_success_threshold *= 2; 1438 if (amn->amn_success_threshold > 1439 amrr->amrr_max_success_threshold) 1440 amn->amn_success_threshold = 1441 amrr->amrr_max_success_threshold; 1442 } else { 1443 amn->amn_success_threshold = 1444 amrr->amrr_min_success_threshold; 1445 } 1446 decrease_rate(ni); 1447 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_amrr_choose(): " 1448 "decrease rate = %d, #tx = %d, #retries = %d\n", 1449 RV(ni->in_rates.ir_rates[ni->in_txrate]), 1450 amn->amn_txcnt, amn->amn_retrycnt); 1451 need_change = 1; 1452 } 1453 amn->amn_recovery = 0; 1454 } 1455 1456 if (is_enough(amn) || need_change) 1457 reset_cnt(amn); 1458 #undef RV 1459 } 1460 1461 static void 1462 rt2860_newassoc(struct ieee80211com *ic, struct ieee80211_node *in, int isnew) 1463 { 1464 struct rt2860_softc *sc = (struct rt2860_softc *)ic; 1465 uint32_t off; 1466 uint8_t *fptr, wcid = 0; 1467 int i; 1468 1469 if (isnew && in->in_associd != 0) { 1470 /* only interested in true associations */ 1471 wcid = RT2860_AID2WCID(in->in_associd); 1472 1473 /* init WCID table entry */ 1474 off = RT2860_WCID_ENTRY(wcid); 1475 fptr = in->in_macaddr; 1476 for (i = 0; i < IEEE80211_ADDR_LEN; i++) 1477 rt2860_mem_write1(sc, off++, *fptr++); 1478 } 1479 rt2860_amrr_node_init(&sc->amrr, &sc->amn[wcid]); 1480 1481 /* set rate to some reasonable initial value */ 1482 i = in->in_rates.ir_nrates - 1; 1483 for (; i > 0 && (in->in_rates.ir_rates[i] & IEEE80211_RATE_VAL) > 72; ) 1484 i--; 1485 in->in_txrate = i; 1486 1487 RWN_DEBUG(RT2860_DBG_80211, "rwn: rt2860_newassoc(): " 1488 "new assoc isnew=%d WCID=%d, initial rate=%d\n", 1489 isnew, wcid, 1490 in->in_rates.ir_rates[i] & IEEE80211_RATE_VAL); 1491 RWN_DEBUG(RT2860_DBG_80211, "rwn: rt2860_newassoc(): " 1492 "addr=%x:%x:%x:%x:%x:%x\n", 1493 in->in_macaddr[0], in->in_macaddr[1], in->in_macaddr[2], 1494 in->in_macaddr[3], in->in_macaddr[4], in->in_macaddr[5]); 1495 } 1496 1497 void 1498 rt2860_enable_tsf_sync(struct rt2860_softc *sc) 1499 { 1500 struct ieee80211com *ic = &sc->sc_ic; 1501 uint32_t tmp; 1502 1503 tmp = RT2860_READ(sc, RT2860_BCN_TIME_CFG); 1504 1505 tmp &= ~0x1fffff; 1506 tmp |= ic->ic_bss->in_intval * 16; 1507 tmp |= RT2860_TSF_TIMER_EN | RT2860_TBTT_TIMER_EN; 1508 if (ic->ic_opmode == IEEE80211_M_STA) { 1509 /* 1510 * Local TSF is always updated with remote TSF on beacon 1511 * reception. 1512 */ 1513 tmp |= 1 << RT2860_TSF_SYNC_MODE_SHIFT; 1514 } 1515 1516 RT2860_WRITE(sc, RT2860_BCN_TIME_CFG, tmp); 1517 } 1518 1519 static int 1520 rt2860_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) 1521 { 1522 struct rt2860_softc *sc = (struct rt2860_softc *)ic; 1523 enum ieee80211_state ostate; 1524 int err; 1525 uint32_t tmp; 1526 1527 ostate = ic->ic_state; 1528 RWN_DEBUG(RT2860_DBG_80211, "rwn: rt2860_newstate(): " 1529 "%x -> %x!\n", ostate, nstate); 1530 1531 RT2860_GLOCK(sc); 1532 if (sc->sc_scan_id != 0) { 1533 (void) untimeout(sc->sc_scan_id); 1534 sc->sc_scan_id = 0; 1535 } 1536 if (sc->sc_rssadapt_id != 0) { 1537 (void) untimeout(sc->sc_rssadapt_id); 1538 sc->sc_rssadapt_id = 0; 1539 } 1540 if (ostate == IEEE80211_S_RUN) { 1541 /* turn link LED off */ 1542 rt2860_set_leds(sc, RT2860_LED_RADIO); 1543 } 1544 1545 switch (nstate) { 1546 case IEEE80211_S_INIT: 1547 if (ostate == IEEE80211_S_RUN) { 1548 /* abort TSF synchronization */ 1549 tmp = RT2860_READ(sc, RT2860_BCN_TIME_CFG); 1550 RT2860_WRITE(sc, RT2860_BCN_TIME_CFG, 1551 tmp & ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN | 1552 RT2860_TBTT_TIMER_EN)); 1553 } 1554 break; 1555 1556 case IEEE80211_S_SCAN: 1557 rt2860_set_chan(sc, ic->ic_curchan); 1558 sc->sc_scan_id = timeout(rt2860_next_scan, (void *)sc, 1559 drv_usectohz(200000)); 1560 break; 1561 1562 case IEEE80211_S_AUTH: 1563 case IEEE80211_S_ASSOC: 1564 rt2860_set_chan(sc, ic->ic_curchan); 1565 break; 1566 1567 case IEEE80211_S_RUN: 1568 rt2860_set_chan(sc, ic->ic_curchan); 1569 1570 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 1571 rt2860_updateslot(sc); 1572 rt2860_enable_mrr(sc); 1573 rt2860_set_txpreamble(sc); 1574 rt2860_set_basicrates(sc); 1575 rt2860_set_bssid(sc, ic->ic_bss->in_bssid); 1576 } 1577 if (ic->ic_opmode == IEEE80211_M_STA) { 1578 /* fake a join to init the tx rate */ 1579 rt2860_newassoc(ic, ic->ic_bss, 1); 1580 } 1581 1582 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 1583 rt2860_enable_tsf_sync(sc); 1584 sc->sc_rssadapt_id = timeout(rt2860_updatestats, 1585 (void *)sc, drv_usectohz(500 * 1000)); 1586 } 1587 1588 /* turn link LED on */ 1589 rt2860_set_leds(sc, RT2860_LED_RADIO | 1590 (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan) ? 1591 RT2860_LED_LINK_2GHZ : RT2860_LED_LINK_5GHZ)); 1592 break; 1593 } 1594 1595 RT2860_GUNLOCK(sc); 1596 1597 err = sc->sc_newstate(ic, nstate, arg); 1598 1599 return (err); 1600 } 1601 1602 /* 1603 * Return the Rx chain with the highest RSSI for a given frame. 1604 */ 1605 static uint8_t 1606 rt2860_maxrssi_chain(struct rt2860_softc *sc, const struct rt2860_rxwi *rxwi) 1607 { 1608 uint8_t rxchain = 0; 1609 1610 if (sc->nrxchains > 1) 1611 if (rxwi->rssi[1] > rxwi->rssi[rxchain]) 1612 rxchain = 1; 1613 if (sc->nrxchains > 2) 1614 if (rxwi->rssi[2] > rxwi->rssi[rxchain]) 1615 rxchain = 2; 1616 1617 return (rxchain); 1618 } 1619 1620 static void 1621 rt2860_drain_stats_fifo(struct rt2860_softc *sc) 1622 { 1623 struct rt2860_amrr_node *amn; 1624 uint32_t stat; 1625 uint8_t wcid, mcs, pid; 1626 1627 /* drain Tx status FIFO (maxsize = 16) */ 1628 while ((stat = RT2860_READ(sc, RT2860_TX_STAT_FIFO)) & RT2860_TXQ_VLD) { 1629 RWN_DEBUG(RT2860_DBG_TX, "rwn: rt2860_drain_stats_fifo(): " 1630 "tx stat 0x%08\n", stat); 1631 1632 wcid = (stat >> 8) & 0xff; 1633 1634 /* if no ACK was requested, no feedback is available */ 1635 if (!(stat & RT2860_TXQ_ACKREQ) || wcid == 0xff) 1636 continue; 1637 /* update per-STA AMRR stats */ 1638 amn = &sc->amn[wcid]; 1639 amn->amn_txcnt++; 1640 if (stat & RT2860_TXQ_OK) { 1641 /* 1642 * Check if there were retries, ie if the Tx success 1643 * rate is different from the requested rate. Note 1644 * that it works only because we do not allow rate 1645 * fallback from OFDM to CCK. 1646 */ 1647 mcs = (stat >> RT2860_TXQ_MCS_SHIFT) & 0x7f; 1648 pid = (stat >> RT2860_TXQ_PID_SHIFT) & 0xf; 1649 if (mcs + 1 != pid) 1650 amn->amn_retrycnt++; 1651 } else 1652 amn->amn_retrycnt++; 1653 } 1654 } 1655 1656 /*ARGSUSED*/ 1657 static void 1658 rt2860_tx_intr(struct rt2860_softc *sc, int qid) 1659 { 1660 struct rt2860_tx_ring *ring = &sc->txq[qid]; 1661 struct ieee80211com *ic = &sc->sc_ic; 1662 uint32_t hw; 1663 1664 rt2860_drain_stats_fifo(sc); 1665 1666 mutex_enter(&sc->sc_txlock); 1667 hw = RT2860_READ(sc, RT2860_TX_DTX_IDX(qid)); 1668 RWN_DEBUG(RT2860_DBG_TX, "rwn: rwn_tx_intr():" 1669 "hw = %x, ring->next = %x, queued = %d\n", 1670 hw, ring->next, ring->queued); 1671 while (ring->next != hw) { 1672 struct rt2860_txd *txd = &ring->txd[ring->next]; 1673 struct rt2860_tx_data *data = ring->data[ring->next]; 1674 1675 if (data != NULL) { 1676 RT2860_DMA_SYNC(data->txbuf_dma, DDI_DMA_SYNC_FORDEV); 1677 if (data->ni != NULL) { 1678 ieee80211_free_node(data->ni); 1679 data->ni = NULL; 1680 } 1681 SLIST_INSERT_HEAD(&sc->data_pool, data, next); 1682 ring->data[ring->next] = NULL; 1683 } 1684 1685 txd->sdl0 &= ~LE_16(RT2860_TX_DDONE); 1686 1687 (void) ddi_dma_sync(ring->txdesc_dma.dma_hdl, 1688 ring->next * sizeof (struct rt2860_txd), 1689 sizeof (struct rt2860_txd), 1690 DDI_DMA_SYNC_FORDEV); 1691 1692 ring->queued--; 1693 ring->next = (ring->next + 1) % RT2860_TX_RING_COUNT; 1694 1695 if (sc->sc_need_sched && 1696 (ring->queued < RT2860_TX_RING_COUNT)) { 1697 sc->sc_need_sched = 0; 1698 mac_tx_update(ic->ic_mach); 1699 } 1700 } 1701 sc->sc_tx_timer = 0; 1702 mutex_exit(&sc->sc_txlock); 1703 } 1704 1705 static void 1706 rt2860_rx_intr(struct rt2860_softc *sc) 1707 { 1708 struct ieee80211com *ic = &sc->sc_ic; 1709 struct ieee80211_node *ni; 1710 struct ieee80211_frame *wh; 1711 int pktlen; 1712 uint8_t ant, rssi, *rxbuf; 1713 mblk_t *mp0; 1714 1715 mutex_enter(&sc->sc_rxlock); 1716 for (;;) { 1717 struct rt2860_rx_data *data = &sc->rxq.data[sc->rxq.cur]; 1718 struct rt2860_rxd *rxd = &sc->rxq.rxd[sc->rxq.cur]; 1719 struct rt2860_rxwi *rxwi; 1720 1721 (void) ddi_dma_sync(sc->rxq.rxdesc_dma.dma_hdl, 1722 sc->rxq.cur * sizeof (struct rt2860_rxd), 1723 sizeof (struct rt2860_rxd), 1724 DDI_DMA_SYNC_FORKERNEL); 1725 1726 if (!(rxd->sdl0 & LE_16(RT2860_RX_DDONE))) { 1727 RWN_DEBUG(RT2860_DBG_RX, "rwn: rt2860_rx_intr(): " 1728 "rx done!\n"); 1729 break; 1730 } 1731 1732 if (rxd->flags & 1733 LE_32(RT2860_RX_CRCERR | RT2860_RX_ICVERR)) { 1734 RWN_DEBUG(RT2860_DBG_RX, "rwn: rt2860_rx_intr(): " 1735 "rx crc error & rx icv error!\n"); 1736 sc->sc_rx_err++; 1737 goto skip; 1738 } 1739 1740 if (rxd->flags & LE_32(RT2860_RX_MICERR)) { 1741 RWN_DEBUG(RT2860_DBG_RX, "rwn: rt2860_rx_intr(): " 1742 "rx mic error!\n"); 1743 sc->sc_rx_err++; 1744 goto skip; 1745 } 1746 1747 (void) ddi_dma_sync(data->rxbuf_dma.dma_hdl, 1748 data->rxbuf_dma.offset, 1749 data->rxbuf_dma.alength, 1750 DDI_DMA_SYNC_FORCPU); 1751 1752 rxbuf = (uint8_t *)data->rxbuf_dma.mem_va; 1753 rxd->sdp0 = LE_32(data->rxbuf_dma.cookie.dmac_address); 1754 rxwi = (struct rt2860_rxwi *)rxbuf; 1755 rxbuf = (uint8_t *)(rxwi + 1); 1756 pktlen = LE_16(rxwi->len) & 0xfff; 1757 1758 mp0 = allocb(sc->sc_dmabuf_size, BPRI_MED); 1759 if (mp0 == NULL) { 1760 RWN_DEBUG(RT2860_DBG_RX, "rwn: rt2860_rx_intr():" 1761 "alloc mblk error\n"); 1762 sc->sc_rx_nobuf++; 1763 goto skip; 1764 } 1765 bcopy(rxbuf, mp0->b_rptr, pktlen); 1766 mp0->b_wptr += pktlen; 1767 1768 wh = (struct ieee80211_frame *)mp0->b_rptr; 1769 1770 /* HW may insert 2 padding bytes after 802.11 header */ 1771 if (rxd->flags & LE_32(RT2860_RX_L2PAD)) { 1772 RWN_DEBUG(RT2860_DBG_RX, "rwn: rt2860_rx_intr():" 1773 "2 padding bytes after 80211 header!\n"); 1774 } 1775 1776 ant = rt2860_maxrssi_chain(sc, rxwi); 1777 rssi = RT2860_RSSI_OFFSET - rxwi->rssi[ant]; 1778 /* grab a reference to the source node */ 1779 ni = ieee80211_find_rxnode(ic, wh); 1780 1781 (void) ieee80211_input(ic, mp0, ni, rssi, 0); 1782 1783 /* node is no longer needed */ 1784 ieee80211_free_node(ni); 1785 skip: 1786 rxd->sdl0 &= ~LE_16(RT2860_RX_DDONE); 1787 1788 (void) ddi_dma_sync(sc->rxq.rxdesc_dma.dma_hdl, 1789 sc->rxq.cur * sizeof (struct rt2860_rxd), 1790 sizeof (struct rt2860_rxd), 1791 DDI_DMA_SYNC_FORDEV); 1792 1793 sc->rxq.cur = (sc->rxq.cur + 1) % RT2860_RX_RING_COUNT; 1794 } 1795 mutex_exit(&sc->sc_rxlock); 1796 1797 /* tell HW what we have processed */ 1798 RT2860_WRITE(sc, RT2860_RX_CALC_IDX, 1799 (sc->rxq.cur - 1) % RT2860_RX_RING_COUNT); 1800 } 1801 1802 static uint_t 1803 rt2860_softintr(caddr_t data) 1804 { 1805 struct rt2860_softc *sc = (struct rt2860_softc *)data; 1806 1807 /* 1808 * Check if the soft interrupt is triggered by another 1809 * driver at the same level. 1810 */ 1811 RT2860_GLOCK(sc); 1812 if (sc->sc_rx_pend) { 1813 sc->sc_rx_pend = 0; 1814 RT2860_GUNLOCK(sc); 1815 rt2860_rx_intr(sc); 1816 return (DDI_INTR_CLAIMED); 1817 } 1818 RT2860_GUNLOCK(sc); 1819 1820 return (DDI_INTR_UNCLAIMED); 1821 } 1822 1823 static uint_t 1824 rt2860_intr(caddr_t arg) 1825 { 1826 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 1827 uint32_t r; 1828 1829 RT2860_GLOCK(sc); 1830 1831 if ((!RT2860_IS_RUNNING(sc)) || RT2860_IS_SUSPEND(sc)) { 1832 /* 1833 * The hardware is not ready/present, don't touch anything. 1834 * Note this can happen early on if the IRQ is shared. 1835 */ 1836 RT2860_GUNLOCK(sc); 1837 return (DDI_INTR_UNCLAIMED); 1838 } 1839 1840 r = RT2860_READ(sc, RT2860_INT_STATUS); 1841 if (r == 0xffffffff) { 1842 RT2860_GUNLOCK(sc); 1843 return (DDI_INTR_UNCLAIMED); 1844 } 1845 if (r == 0) { 1846 RT2860_GUNLOCK(sc); 1847 return (DDI_INTR_UNCLAIMED); 1848 } 1849 1850 /* acknowledge interrupts */ 1851 RT2860_WRITE(sc, RT2860_INT_STATUS, r); 1852 1853 if (r & RT2860_TX_COHERENT) 1854 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr()" 1855 "RT2860_TX_COHERENT\n"); 1856 1857 if (r & RT2860_RX_COHERENT) 1858 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr()" 1859 "RT2860_RX_COHERENT\n"); 1860 1861 if (r & RT2860_MAC_INT_2) { 1862 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1863 "RT2860_MAC_INT_2\n"); 1864 rt2860_drain_stats_fifo(sc); 1865 } 1866 1867 if (r & RT2860_TX_DONE_INT5) { 1868 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1869 "RT2860_TX_DONE_INT5\n"); 1870 rt2860_tx_intr(sc, 5); 1871 } 1872 1873 if (r & RT2860_RX_DONE_INT) { 1874 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr()" 1875 "RT2860_RX_INT\n"); 1876 sc->sc_rx_pend = 1; 1877 ddi_trigger_softintr(sc->sc_softintr_hdl); 1878 } 1879 1880 if (r & RT2860_TX_DONE_INT4) { 1881 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1882 "RT2860_TX_DONE_INT4\n"); 1883 rt2860_tx_intr(sc, 4); 1884 } 1885 1886 if (r & RT2860_TX_DONE_INT3) { 1887 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1888 "RT2860_TX_DONE_INT3\n"); 1889 rt2860_tx_intr(sc, 3); 1890 } 1891 1892 if (r & RT2860_TX_DONE_INT2) { 1893 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1894 "RT2860_TX_DONE_INT2\n"); 1895 rt2860_tx_intr(sc, 2); 1896 } 1897 1898 if (r & RT2860_TX_DONE_INT1) { 1899 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1900 "RT2860_TX_DONE_INT1\n"); 1901 rt2860_tx_intr(sc, 1); 1902 } 1903 1904 if (r & RT2860_TX_DONE_INT0) { 1905 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1906 "RT2860_TX_DONE_INT0\n"); 1907 rt2860_tx_intr(sc, 0); 1908 } 1909 1910 if (r & RT2860_MAC_INT_0) { 1911 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1912 "RT2860_MAC_INT_0\n"); 1913 struct ieee80211com *ic = &sc->sc_ic; 1914 /* check if protection mode has changed */ 1915 if ((sc->sc_ic_flags ^ ic->ic_flags) & IEEE80211_F_USEPROT) { 1916 rt2860_updateprot(ic); 1917 sc->sc_ic_flags = ic->ic_flags; 1918 } 1919 } 1920 1921 if (r & RT2860_MAC_INT_3) 1922 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1923 "RT2860_MAC_INT_3\n"); 1924 1925 RT2860_GUNLOCK(sc); 1926 1927 return (DDI_INTR_CLAIMED); 1928 } 1929 1930 static void 1931 rt2860_set_region_4(struct rt2860_softc *sc, 1932 uint32_t addr, uint32_t data, int size) 1933 { 1934 for (; size > 0; size--, data++, addr += 4) 1935 ddi_put32((sc)->sc_io_handle, 1936 (uint32_t *)((uintptr_t)(sc)->sc_io_base + addr), data); 1937 } 1938 1939 static int 1940 rt2860_load_microcode(struct rt2860_softc *sc) 1941 { 1942 int ntries; 1943 size_t size; 1944 uint8_t *ucode, *fptr; 1945 uint32_t off, i; 1946 1947 ucode = rt2860_fw_bin; 1948 size = sizeof (rt2860_fw_bin); 1949 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_load_microcode(): " 1950 "The size of ucode is: %x\n", size); 1951 1952 /* set "host program ram write selection" bit */ 1953 RT2860_WRITE(sc, RT2860_SYS_CTRL, RT2860_HST_PM_SEL); 1954 /* write microcode image */ 1955 fptr = ucode; 1956 off = RT2860_FW_BASE; 1957 for (i = 0; i < size; i++) { 1958 rt2860_mem_write1(sc, off++, *fptr++); 1959 } 1960 /* kick microcontroller unit */ 1961 RT2860_WRITE(sc, RT2860_SYS_CTRL, 0); 1962 RT2860_WRITE(sc, RT2860_SYS_CTRL, RT2860_MCU_RESET); 1963 1964 RT2860_WRITE(sc, RT2860_H2M_BBPAGENT, 0); 1965 RT2860_WRITE(sc, RT2860_H2M_MAILBOX, 0); 1966 1967 /* wait until microcontroller is ready */ 1968 for (ntries = 0; ntries < 1000; ntries++) { 1969 if (RT2860_READ(sc, RT2860_SYS_CTRL) & RT2860_MCU_READY) 1970 break; 1971 DELAY(1000); 1972 } 1973 if (ntries == 1000) { 1974 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_load_microcode(): " 1975 "timeout waiting for MCU to initialie\n"); 1976 return (ETIMEDOUT); 1977 } 1978 1979 return (0); 1980 } 1981 1982 static void 1983 rt2860_set_macaddr(struct rt2860_softc *sc, const uint8_t *addr) 1984 { 1985 RT2860_WRITE(sc, RT2860_MAC_ADDR_DW0, 1986 addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24); 1987 RT2860_WRITE(sc, RT2860_MAC_ADDR_DW1, 1988 addr[4] | addr[5] << 8); 1989 } 1990 1991 /* 1992 * Send a command to the 8051 microcontroller unit. 1993 */ 1994 static int 1995 rt2860_mcu_cmd(struct rt2860_softc *sc, uint8_t cmd, uint16_t arg) 1996 { 1997 int ntries; 1998 1999 for (ntries = 0; ntries < 100; ntries++) { 2000 if (!(RT2860_READ(sc, RT2860_H2M_MAILBOX) & RT2860_H2M_BUSY)) 2001 break; 2002 DELAY(2); 2003 } 2004 if (ntries == 100) 2005 return (EIO); 2006 2007 RT2860_WRITE(sc, RT2860_H2M_MAILBOX, 2008 RT2860_H2M_BUSY | RT2860_TOKEN_NO_INTR << 16 | arg); 2009 RT2860_WRITE(sc, RT2860_HOST_CMD, cmd); 2010 2011 return (RT2860_SUCCESS); 2012 } 2013 2014 /* 2015 * Reading and writing from/to the BBP is different from RT2560 and RT2661. 2016 * We access the BBP through the 8051 microcontroller unit which means that 2017 * the microcode must be loaded first. 2018 */ 2019 static uint8_t 2020 rt2860_mcu_bbp_read(struct rt2860_softc *sc, uint8_t reg) 2021 { 2022 uint32_t val; 2023 int ntries; 2024 2025 for (ntries = 0; ntries < 100; ntries++) { 2026 if (!(RT2860_READ(sc, 2027 RT2860_H2M_BBPAGENT) & RT2860_BBP_CSR_KICK)) 2028 break; 2029 DELAY(1); 2030 } 2031 if (ntries == 100) { 2032 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_mcu_bbp_read():" 2033 "could not read from BBP through MCU\n"); 2034 return (0); 2035 } 2036 2037 RT2860_WRITE(sc, RT2860_H2M_BBPAGENT, RT2860_BBP_RW_PARALLEL | 2038 RT2860_BBP_CSR_KICK | RT2860_BBP_CSR_READ | reg << 8); 2039 2040 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_BBP, 0); 2041 DELAY(1000); 2042 2043 for (ntries = 0; ntries < 100; ntries++) { 2044 val = RT2860_READ(sc, RT2860_H2M_BBPAGENT); 2045 if (!(val & RT2860_BBP_CSR_KICK)) 2046 return (val & 0xff); 2047 DELAY(1); 2048 } 2049 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_mcu_bbp_read():" 2050 "could not read from BBP through MCU\n"); 2051 2052 return (0); 2053 } 2054 2055 static void 2056 rt2860_mcu_bbp_write(struct rt2860_softc *sc, uint8_t reg, uint8_t val) 2057 { 2058 int ntries; 2059 2060 for (ntries = 0; ntries < 100; ntries++) { 2061 if (!(RT2860_READ(sc, 2062 RT2860_H2M_BBPAGENT) & RT2860_BBP_CSR_KICK)) 2063 break; 2064 DELAY(1); 2065 } 2066 if (ntries == 100) { 2067 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_mcu_bbp_write():" 2068 "could not write to BBP through MCU\n"); 2069 return; 2070 } 2071 2072 RT2860_WRITE(sc, RT2860_H2M_BBPAGENT, RT2860_BBP_RW_PARALLEL | 2073 RT2860_BBP_CSR_KICK | reg << 8 | val); 2074 2075 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_BBP, 0); 2076 DELAY(1000); 2077 } 2078 2079 static int 2080 rt2860_bbp_init(struct rt2860_softc *sc) 2081 { 2082 int i, ntries; 2083 2084 /* wait for BBP to wake up */ 2085 for (ntries = 0; ntries < 20; ntries++) { 2086 uint8_t bbp0 = rt2860_mcu_bbp_read(sc, 0); 2087 if (bbp0 != 0 && bbp0 != 0xff) 2088 break; 2089 } 2090 if (ntries == 20) { 2091 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_bbp_init():" 2092 "timeout waiting for BBP to wake up\n"); 2093 return (ETIMEDOUT); 2094 } 2095 2096 /* initialize BBP registers to default values */ 2097 for (i = 0; i < 12; i++) { 2098 rt2860_mcu_bbp_write(sc, rt2860_def_bbp[i].reg, 2099 rt2860_def_bbp[i].val); 2100 } 2101 2102 /* fix BBP69 and BBP73 for RT2860C */ 2103 if (sc->mac_rev == 0x28600100) { 2104 rt2860_mcu_bbp_write(sc, 69, 0x16); 2105 rt2860_mcu_bbp_write(sc, 73, 0x12); 2106 } 2107 2108 return (0); 2109 } 2110 2111 static void 2112 rt2860_rf_write(struct rt2860_softc *sc, uint8_t reg, uint32_t val) 2113 { 2114 uint32_t tmp; 2115 int ntries; 2116 2117 for (ntries = 0; ntries < 100; ntries++) { 2118 if (!(RT2860_READ(sc, RT2860_RF_CSR_CFG0) & RT2860_RF_REG_CTRL)) 2119 break; 2120 DELAY(1); 2121 } 2122 if (ntries == 100) { 2123 RWN_DEBUG(RT2860_DBG_FW, "rwn: rwn_init()" 2124 "could not write to RF\n"); 2125 return; 2126 } 2127 2128 /* RF registers are 24-bit on the RT2860 */ 2129 tmp = RT2860_RF_REG_CTRL | 24 << RT2860_RF_REG_WIDTH_SHIFT | 2130 (val & 0x3fffff) << 2 | (reg & 3); 2131 RT2860_WRITE(sc, RT2860_RF_CSR_CFG0, tmp); 2132 } 2133 2134 static void 2135 rt2860_select_chan_group(struct rt2860_softc *sc, int group) 2136 { 2137 uint32_t tmp; 2138 2139 rt2860_mcu_bbp_write(sc, 62, 0x37 - sc->lna[group]); 2140 rt2860_mcu_bbp_write(sc, 63, 0x37 - sc->lna[group]); 2141 rt2860_mcu_bbp_write(sc, 64, 0x37 - sc->lna[group]); 2142 rt2860_mcu_bbp_write(sc, 82, (group == 0) ? 0x62 : 0xf2); 2143 2144 tmp = RT2860_READ(sc, RT2860_TX_BAND_CFG); 2145 tmp &= ~(RT2860_5G_BAND_SEL_N | RT2860_5G_BAND_SEL_P); 2146 tmp |= (group == 0) ? RT2860_5G_BAND_SEL_N : RT2860_5G_BAND_SEL_P; 2147 RT2860_WRITE(sc, RT2860_TX_BAND_CFG, tmp); 2148 2149 /* enable appropriate Power Amplifiers and Low Noise Amplifiers */ 2150 tmp = RT2860_RFTR_EN | RT2860_TRSW_EN; 2151 if (group == 0) { /* 2GHz */ 2152 tmp |= RT2860_PA_PE_G0_EN | RT2860_LNA_PE_G0_EN; 2153 if (sc->ntxchains > 1) 2154 tmp |= RT2860_PA_PE_G1_EN; 2155 if (sc->nrxchains > 1) 2156 tmp |= RT2860_LNA_PE_G1_EN; 2157 } else { /* 5GHz */ 2158 tmp |= RT2860_PA_PE_A0_EN | RT2860_LNA_PE_A0_EN; 2159 if (sc->ntxchains > 1) 2160 tmp |= RT2860_PA_PE_A1_EN; 2161 if (sc->nrxchains > 1) 2162 tmp |= RT2860_LNA_PE_A1_EN; 2163 } 2164 RT2860_WRITE(sc, RT2860_TX_PIN_CFG, tmp); 2165 2166 rt2860_mcu_bbp_write(sc, 66, 0x2e + sc->lna[group]); 2167 } 2168 static void 2169 rt2860_set_chan(struct rt2860_softc *sc, struct ieee80211_channel *c) 2170 { 2171 struct ieee80211com *ic = &sc->sc_ic; 2172 const struct rfprog *rfprog = rt2860_rf2850; 2173 uint_t i, chan, group; 2174 uint8_t txpow1, txpow2; 2175 uint32_t r2, r3, r4; 2176 2177 chan = ieee80211_chan2ieee(ic, c); 2178 if (chan == 0 || chan == IEEE80211_CHAN_ANY) { 2179 RWN_DEBUG(RT2860_DBG_FW, "Unkonwn channel!\n"); 2180 return; 2181 } 2182 2183 /* find the settings for this channel (we know it exists) */ 2184 for (i = 0; rfprog[i].chan != chan; ) 2185 i++; 2186 2187 r2 = rfprog[i].r2; 2188 if (sc->ntxchains == 1) 2189 r2 |= 1 << 12; /* 1T: disable Tx chain 2 */ 2190 if (sc->nrxchains == 1) 2191 r2 |= 1 << 15 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */ 2192 else if (sc->nrxchains == 2) 2193 r2 |= 1 << 4; /* 2R: disable Rx chain 3 */ 2194 2195 /* use Tx power values from EEPROM */ 2196 txpow1 = sc->txpow1[i]; 2197 txpow2 = sc->txpow2[i]; 2198 if (IEEE80211_IS_CHAN_5GHZ(c)) { 2199 txpow1 = txpow1 << 1 | 1; 2200 txpow2 = txpow2 << 1 | 1; 2201 } 2202 r3 = rfprog[i].r3 | txpow1 << 7; 2203 r4 = rfprog[i].r4 | sc->freq << 13 | txpow2 << 4; 2204 2205 rt2860_rf_write(sc, RAL_RF1, rfprog[i].r1); 2206 rt2860_rf_write(sc, RAL_RF2, r2); 2207 rt2860_rf_write(sc, RAL_RF3, r3); 2208 rt2860_rf_write(sc, RAL_RF4, r4); 2209 2210 DELAY(200); 2211 2212 rt2860_rf_write(sc, RAL_RF1, rfprog[i].r1); 2213 rt2860_rf_write(sc, RAL_RF2, r2); 2214 rt2860_rf_write(sc, RAL_RF3, r3 | 1); 2215 rt2860_rf_write(sc, RAL_RF4, r4); 2216 2217 DELAY(200); 2218 2219 rt2860_rf_write(sc, RAL_RF1, rfprog[i].r1); 2220 rt2860_rf_write(sc, RAL_RF2, r2); 2221 rt2860_rf_write(sc, RAL_RF3, r3); 2222 rt2860_rf_write(sc, RAL_RF4, r4); 2223 2224 /* 802.11a uses a 16 microseconds short interframe space */ 2225 sc->sifs = IEEE80211_IS_CHAN_5GHZ(c) ? 16 : 10; 2226 2227 /* determine channel group */ 2228 if (chan <= 14) 2229 group = 0; 2230 else if (chan <= 64) 2231 group = 1; 2232 else if (chan <= 128) 2233 group = 2; 2234 else 2235 group = 3; 2236 2237 /* XXX necessary only when group has changed! */ 2238 rt2860_select_chan_group(sc, group); 2239 2240 DELAY(1000); 2241 } 2242 2243 static void 2244 rt2860_updateprot(struct ieee80211com *ic) 2245 { 2246 struct rt2860_softc *sc = (struct rt2860_softc *)ic; 2247 uint32_t tmp; 2248 2249 tmp = RT2860_RTSTH_EN | RT2860_PROT_NAV_SHORT | RT2860_TXOP_ALLOW_ALL; 2250 /* setup protection frame rate (MCS code) */ 2251 tmp |= (ic->ic_curmode == IEEE80211_MODE_11A) ? 0 : 3; 2252 2253 /* CCK frames don't require protection */ 2254 RT2860_WRITE(sc, RT2860_CCK_PROT_CFG, tmp); 2255 2256 if (ic->ic_flags & IEEE80211_F_USEPROT) { 2257 if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) 2258 tmp |= RT2860_PROT_CTRL_RTS_CTS; 2259 else if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) 2260 tmp |= RT2860_PROT_CTRL_CTS; 2261 } 2262 RT2860_WRITE(sc, RT2860_OFDM_PROT_CFG, tmp); 2263 } 2264 2265 static void 2266 rt2860_set_leds(struct rt2860_softc *sc, uint16_t which) 2267 { 2268 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LEDS, 2269 which | (sc->leds & 0x7f)); 2270 } 2271 2272 static int 2273 rt2860_init(struct rt2860_softc *sc) 2274 { 2275 #define N(a) (sizeof (a) / sizeof ((a)[0])) 2276 struct ieee80211com *ic; 2277 int i, err, qid, ridx, ntries; 2278 uint8_t bbp1, bbp3; 2279 uint32_t tmp; 2280 2281 ic = &sc->sc_ic; 2282 2283 rt2860_stop(sc); 2284 tmp = RT2860_READ(sc, RT2860_WPDMA_GLO_CFG); 2285 tmp &= 0xff0; 2286 RT2860_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp | RT2860_TX_WB_DDONE); 2287 2288 RT2860_WRITE(sc, RT2860_WPDMA_RST_IDX, 0xffffffff); 2289 2290 /* PBF hardware reset */ 2291 RT2860_WRITE(sc, RT2860_SYS_CTRL, 0xe1f); 2292 RT2860_WRITE(sc, RT2860_SYS_CTRL, 0xe00); 2293 2294 if (!(sc->sc_flags & RT2860_FWLOADED)) { 2295 if ((err = rt2860_load_microcode(sc)) != 0) { 2296 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_init(): " 2297 "could not load 8051 microcode\n"); 2298 rt2860_stop(sc); 2299 return (err); 2300 } 2301 RT2860_GLOCK(sc); 2302 sc->sc_flags |= RT2860_FWLOADED; 2303 RT2860_GUNLOCK(sc); 2304 } 2305 2306 rt2860_set_macaddr(sc, ic->ic_macaddr); 2307 2308 /* init Tx power for all Tx rates (from EEPROM) */ 2309 for (ridx = 0; ridx < 5; ridx++) { 2310 if (sc->txpow20mhz[ridx] == 0xffffffff) 2311 continue; 2312 RT2860_WRITE(sc, RT2860_TX_PWR_CFG(ridx), sc->txpow20mhz[ridx]); 2313 } 2314 2315 for (ntries = 0; ntries < 100; ntries++) { 2316 tmp = RT2860_READ(sc, RT2860_WPDMA_GLO_CFG); 2317 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 2318 break; 2319 DELAY(1000); 2320 } 2321 if (ntries == 100) { 2322 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rt2860_init():" 2323 "timeout waiting for DMA engine\n"); 2324 rt2860_stop(sc); 2325 return (ETIMEDOUT); 2326 } 2327 tmp &= 0xff0; 2328 RT2860_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp | RT2860_TX_WB_DDONE); 2329 2330 /* reset Rx ring and all 6 Tx rings */ 2331 RT2860_WRITE(sc, RT2860_WPDMA_RST_IDX, 0x1003f); 2332 2333 /* PBF hardware reset */ 2334 RT2860_WRITE(sc, RT2860_SYS_CTRL, 0xe1f); 2335 RT2860_WRITE(sc, RT2860_SYS_CTRL, 0xe00); 2336 2337 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, 2338 RT2860_BBP_HRST | RT2860_MAC_SRST); 2339 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, 0); 2340 2341 for (i = 0; i < N(rt2860_def_mac); i++) 2342 RT2860_WRITE(sc, rt2860_def_mac[i].reg, rt2860_def_mac[i].val); 2343 2344 /* wait while MAC is busy */ 2345 for (ntries = 0; ntries < 100; ntries++) { 2346 if (!(RT2860_READ(sc, RT2860_MAC_STATUS_REG) & 2347 (RT2860_RX_STATUS_BUSY | RT2860_TX_STATUS_BUSY))) 2348 break; 2349 DELAY(1000); 2350 } 2351 if (ntries == 100) { 2352 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_init():" 2353 "timeout waiting for MAC\n"); 2354 rt2860_stop(sc); 2355 return (ETIMEDOUT); 2356 } 2357 2358 /* clear Host to MCU mailbox */ 2359 RT2860_WRITE(sc, RT2860_H2M_BBPAGENT, 0); 2360 RT2860_WRITE(sc, RT2860_H2M_MAILBOX, 0); 2361 2362 if ((err = rt2860_bbp_init(sc)) != 0) { 2363 rt2860_stop(sc); 2364 return (err); 2365 } 2366 2367 /* init Tx rings (4 EDCAs + HCCA + Mgt) */ 2368 for (qid = 0; qid < 6; qid++) { 2369 RT2860_WRITE(sc, RT2860_TX_BASE_PTR(qid), sc->txq[qid].paddr); 2370 RT2860_WRITE(sc, RT2860_TX_MAX_CNT(qid), RT2860_TX_RING_COUNT); 2371 RT2860_WRITE(sc, RT2860_TX_CTX_IDX(qid), 0); 2372 } 2373 2374 /* init Rx ring */ 2375 RT2860_WRITE(sc, RT2860_RX_BASE_PTR, sc->rxq.paddr); 2376 RT2860_WRITE(sc, RT2860_RX_MAX_CNT, RT2860_RX_RING_COUNT); 2377 RT2860_WRITE(sc, RT2860_RX_CALC_IDX, RT2860_RX_RING_COUNT - 1); 2378 2379 /* setup maximum buffer sizes */ 2380 RT2860_WRITE(sc, RT2860_MAX_LEN_CFG, 1 << 12 | 2381 (sc->sc_dmabuf_size - sizeof (struct rt2860_rxwi) - 2)); 2382 2383 for (ntries = 0; ntries < 100; ntries++) { 2384 tmp = RT2860_READ(sc, RT2860_WPDMA_GLO_CFG); 2385 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 2386 break; 2387 DELAY(1000); 2388 } 2389 if (ntries == 100) { 2390 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rt2860_init():" 2391 "timeout waiting for DMA engine\n"); 2392 rt2860_stop(sc); 2393 return (ETIMEDOUT); 2394 } 2395 tmp &= 0xff0; 2396 RT2860_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp | RT2860_TX_WB_DDONE); 2397 2398 /* disable interrupts mitigation */ 2399 RT2860_WRITE(sc, RT2860_DELAY_INT_CFG, 0); 2400 2401 /* write vendor-specific BBP values (from EEPROM) */ 2402 for (i = 0; i < 8; i++) { 2403 if (sc->bbp[i].reg == 0 || sc->bbp[i].reg == 0xff) 2404 continue; 2405 rt2860_mcu_bbp_write(sc, sc->bbp[i].reg, sc->bbp[i].val); 2406 } 2407 2408 /* send LEDs operating mode to microcontroller */ 2409 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED1, sc->led[0]); 2410 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED2, sc->led[1]); 2411 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED3, sc->led[2]); 2412 2413 /* disable non-existing Rx chains */ 2414 bbp3 = rt2860_mcu_bbp_read(sc, 3); 2415 bbp3 &= ~(1 << 3 | 1 << 4); 2416 if (sc->nrxchains == 2) 2417 bbp3 |= 1 << 3; 2418 else if (sc->nrxchains == 3) 2419 bbp3 |= 1 << 4; 2420 rt2860_mcu_bbp_write(sc, 3, bbp3); 2421 2422 /* disable non-existing Tx chains */ 2423 bbp1 = rt2860_mcu_bbp_read(sc, 1); 2424 if (sc->ntxchains == 1) 2425 bbp1 &= ~(1 << 3 | 1 << 4); 2426 rt2860_mcu_bbp_write(sc, 1, bbp1); 2427 2428 /* select default channel */ 2429 rt2860_set_chan(sc, ic->ic_curchan); 2430 2431 /* XXX not clear what the following 8051 command does.. */ 2432 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_BOOT, 0); 2433 2434 /* set RTS threshold */ 2435 tmp = RT2860_READ(sc, RT2860_TX_RTS_CFG); 2436 tmp &= ~0xffff00; 2437 tmp |= ic->ic_rtsthreshold << 8; 2438 2439 /* setup initial protection mode */ 2440 sc->sc_ic_flags = ic->ic_flags; 2441 rt2860_updateprot(ic); 2442 2443 /* enable Tx/Rx DMA engine */ 2444 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_TX_EN); 2445 for (ntries = 0; ntries < 200; ntries++) { 2446 tmp = RT2860_READ(sc, RT2860_WPDMA_GLO_CFG); 2447 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 2448 break; 2449 DELAY(1000); 2450 } 2451 if (ntries == 200) { 2452 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rt2860_int():" 2453 "timeout waiting for DMA engine\n"); 2454 rt2860_stop(sc); 2455 return (ETIMEDOUT); 2456 } 2457 2458 DELAY(50); 2459 2460 tmp |= RT2860_TX_WB_DDONE | RT2860_RX_DMA_EN | RT2860_TX_DMA_EN | 2461 RT2860_WPDMA_BT_SIZE64 << RT2860_WPDMA_BT_SIZE_SHIFT; 2462 RT2860_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp); 2463 2464 /* turn radio LED on */ 2465 rt2860_set_leds(sc, RT2860_LED_RADIO); 2466 2467 /* set Rx filter */ 2468 tmp = RT2860_DROP_CRC_ERR | RT2860_DROP_PHY_ERR; 2469 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2470 tmp |= RT2860_DROP_UC_NOME | RT2860_DROP_DUPL | 2471 RT2860_DROP_CTS | RT2860_DROP_BA | RT2860_DROP_ACK | 2472 RT2860_DROP_VER_ERR | RT2860_DROP_CTRL_RSV | 2473 RT2860_DROP_CFACK | RT2860_DROP_CFEND; 2474 if (ic->ic_opmode == IEEE80211_M_STA) 2475 tmp |= RT2860_DROP_RTS | RT2860_DROP_PSPOLL; 2476 } 2477 RT2860_WRITE(sc, RT2860_RX_FILTR_CFG, tmp); 2478 2479 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, 2480 RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); 2481 2482 /* clear pending interrupts */ 2483 RT2860_WRITE(sc, RT2860_INT_STATUS, 0xffffffff); 2484 /* enable interrupts */ 2485 RT2860_WRITE(sc, RT2860_INT_MASK, 0x3fffc); 2486 2487 if (sc->sc_flags & RT2860_ADVANCED_PS) 2488 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_PSLEVEL, sc->pslevel); 2489 2490 return (DDI_SUCCESS); 2491 } 2492 2493 static int 2494 rt2860_quiesce(dev_info_t *dip) 2495 { 2496 struct rt2860_softc *sc; 2497 2498 sc = ddi_get_soft_state(rt2860_soft_state_p, ddi_get_instance(dip)); 2499 if (sc == NULL) 2500 return (DDI_FAILURE); 2501 2502 #ifdef DEBUG 2503 rt2860_dbg_flags = 0; 2504 #endif 2505 2506 /* 2507 * No more blocking is allowed while we are in quiesce(9E) entry point 2508 */ 2509 sc->sc_flags |= RT2860_F_QUIESCE; 2510 2511 /* 2512 * Disable and mask all interrupts 2513 */ 2514 rt2860_stop(sc); 2515 return (DDI_SUCCESS); 2516 } 2517 2518 static void 2519 rt2860_stop(struct rt2860_softc *sc) 2520 { 2521 int qid; 2522 uint32_t tmp; 2523 2524 /* by pass if it's quiesced */ 2525 if (!(sc->sc_flags & RT2860_F_QUIESCE)) 2526 RT2860_GLOCK(sc); 2527 if (sc->sc_flags == RT2860_F_RUNNING) 2528 rt2860_set_leds(sc, 0); /* turn all LEDs off */ 2529 sc->sc_tx_timer = 0; 2530 /* by pass if it's quiesced */ 2531 if (!(sc->sc_flags & RT2860_F_QUIESCE)) 2532 RT2860_GUNLOCK(sc); 2533 2534 /* clear RX WCID search table */ 2535 rt2860_set_region_4(sc, RT2860_WCID_ENTRY(0), 0, 512); 2536 /* clear pairwise key table */ 2537 rt2860_set_region_4(sc, RT2860_PKEY(0), 0, 2048); 2538 /* clear IV/EIV table */ 2539 rt2860_set_region_4(sc, RT2860_IVEIV(0), 0, 512); 2540 /* clear WCID attribute table */ 2541 rt2860_set_region_4(sc, RT2860_WCID_ATTR(0), 0, 256); 2542 /* clear shared key table */ 2543 rt2860_set_region_4(sc, RT2860_SKEY(0, 0), 0, 8 * 32); 2544 /* clear shared key mode */ 2545 rt2860_set_region_4(sc, RT2860_SKEY_MODE_0_7, 0, 4); 2546 2547 /* disable interrupts */ 2548 RT2860_WRITE(sc, RT2860_INT_MASK, 0); 2549 2550 /* disable Rx */ 2551 tmp = RT2860_READ(sc, RT2860_MAC_SYS_CTRL); 2552 tmp &= ~(RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); 2553 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, tmp); 2554 2555 /* reset adapter */ 2556 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, 2557 RT2860_BBP_HRST | RT2860_MAC_SRST); 2558 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, 0); 2559 2560 /* reset Tx and Rx rings (and reclaim TXWIs) */ 2561 for (qid = 0; qid < 6; qid++) 2562 rt2860_reset_tx_ring(sc, &sc->txq[qid]); 2563 rt2860_reset_rx_ring(sc, &sc->rxq); 2564 2565 /* by pass if it's quiesced */ 2566 if (!(sc->sc_flags & RT2860_F_QUIESCE)) 2567 RT2860_GLOCK(sc); 2568 sc->sc_flags &= ~RT2860_UPD_BEACON; 2569 /* by pass if it's quiesced */ 2570 if (!(sc->sc_flags & RT2860_F_QUIESCE)) 2571 RT2860_GUNLOCK(sc); 2572 } 2573 2574 static int 2575 rt2860_m_start(void *arg) 2576 { 2577 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2578 struct ieee80211com *ic = &sc->sc_ic; 2579 int err; 2580 2581 err = rt2860_init(sc); 2582 if (err != DDI_SUCCESS) { 2583 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_m_start():" 2584 "Hardware initialization failed\n"); 2585 goto fail1; 2586 } 2587 2588 ieee80211_new_state(ic, IEEE80211_S_INIT, -1); 2589 2590 RT2860_GLOCK(sc); 2591 sc->sc_flags |= RT2860_F_RUNNING; 2592 RT2860_GUNLOCK(sc); 2593 2594 return (err); 2595 fail1: 2596 rt2860_stop(sc); 2597 return (err); 2598 } 2599 2600 static void 2601 rt2860_m_stop(void *arg) 2602 { 2603 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2604 2605 (void) rt2860_stop(sc); 2606 2607 ieee80211_new_state(&sc->sc_ic, IEEE80211_S_INIT, -1); 2608 2609 RT2860_GLOCK(sc); 2610 sc->sc_flags &= ~RT2860_F_RUNNING; 2611 RT2860_GUNLOCK(sc); 2612 } 2613 2614 static void 2615 rt2860_m_ioctl(void* arg, queue_t *wq, mblk_t *mp) 2616 { 2617 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2618 struct ieee80211com *ic = &sc->sc_ic; 2619 int err; 2620 2621 err = ieee80211_ioctl(ic, wq, mp); 2622 RT2860_GLOCK(sc); 2623 if (err == ENETRESET) { 2624 if (ic->ic_des_esslen) { 2625 if (RT2860_IS_RUNNING(sc)) { 2626 RT2860_GUNLOCK(sc); 2627 (void) rt2860_init(sc); 2628 (void) ieee80211_new_state(ic, 2629 IEEE80211_S_SCAN, -1); 2630 RT2860_GLOCK(sc); 2631 } 2632 } 2633 } 2634 RT2860_GUNLOCK(sc); 2635 } 2636 2637 /* 2638 * Call back function for get/set proporty 2639 */ 2640 static int 2641 rt2860_m_getprop(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num, 2642 uint_t wldp_length, void *wldp_buf) 2643 { 2644 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2645 int err = 0; 2646 2647 err = ieee80211_getprop(&sc->sc_ic, pr_name, wldp_pr_num, 2648 wldp_length, wldp_buf); 2649 2650 return (err); 2651 } 2652 2653 static void 2654 rt2860_m_propinfo(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num, 2655 mac_prop_info_handle_t prh) 2656 { 2657 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2658 2659 ieee80211_propinfo(&sc->sc_ic, pr_name, wldp_pr_num, prh); 2660 } 2661 2662 static int 2663 rt2860_m_setprop(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num, 2664 uint_t wldp_length, const void *wldp_buf) 2665 { 2666 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2667 ieee80211com_t *ic = &sc->sc_ic; 2668 int err; 2669 2670 err = ieee80211_setprop(ic, pr_name, wldp_pr_num, wldp_length, 2671 wldp_buf); 2672 RT2860_GLOCK(sc); 2673 if (err == ENETRESET) { 2674 if (ic->ic_des_esslen) { 2675 if (RT2860_IS_RUNNING(sc)) { 2676 RT2860_GUNLOCK(sc); 2677 (void) rt2860_init(sc); 2678 (void) ieee80211_new_state(ic, 2679 IEEE80211_S_SCAN, -1); 2680 RT2860_GLOCK(sc); 2681 } 2682 } 2683 err = 0; 2684 } 2685 RT2860_GUNLOCK(sc); 2686 return (err); 2687 } 2688 2689 static mblk_t * 2690 rt2860_m_tx(void *arg, mblk_t *mp) 2691 { 2692 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2693 struct ieee80211com *ic = &sc->sc_ic; 2694 mblk_t *next; 2695 2696 if (RT2860_IS_SUSPEND(sc)) { 2697 freemsgchain(mp); 2698 return (NULL); 2699 } 2700 2701 /* 2702 * No data frames go out unless we're associated; this 2703 * should not happen as the 802.11 layer does not enable 2704 * the xmit queue until we enter the RUN state. 2705 */ 2706 if (ic->ic_state != IEEE80211_S_RUN) { 2707 RWN_DEBUG(RT2860_DBG_TX, "rwn: rt2860_tx_data(): " 2708 "discard, state %u\n", ic->ic_state); 2709 freemsgchain(mp); 2710 return (NULL); 2711 } 2712 2713 while (mp != NULL) { 2714 next = mp->b_next; 2715 mp->b_next = NULL; 2716 if (rt2860_send(ic, mp, IEEE80211_FC0_TYPE_DATA) != 2717 DDI_SUCCESS) { 2718 mp->b_next = next; 2719 break; 2720 } 2721 mp = next; 2722 } 2723 return (mp); 2724 } 2725 2726 /*ARGSUSED*/ 2727 static int 2728 rt2860_m_unicst(void *arg, const uint8_t *macaddr) 2729 { 2730 return (ENOTSUP); 2731 } 2732 2733 /*ARGSUSED*/ 2734 static int 2735 rt2860_m_multicst(void *arg, boolean_t add, const uint8_t *mca) 2736 { 2737 return (ENOTSUP); 2738 } 2739 2740 /*ARGSUSED*/ 2741 static int 2742 rt2860_m_promisc(void *arg, boolean_t on) 2743 { 2744 return (0); 2745 } 2746 2747 static int 2748 rt2860_m_stat(void *arg, uint_t stat, uint64_t *val) 2749 { 2750 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2751 ieee80211com_t *ic = &sc->sc_ic; 2752 ieee80211_node_t *ni = ic->ic_bss; 2753 struct ieee80211_rateset *rs = &ni->in_rates; 2754 2755 RT2860_GLOCK(sc); 2756 switch (stat) { 2757 case MAC_STAT_IFSPEED: 2758 *val = ((ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE) ? 2759 (rs->ir_rates[ni->in_txrate] & IEEE80211_RATE_VAL) 2760 : ic->ic_fixed_rate) / 2 * 1000000; 2761 break; 2762 case MAC_STAT_NOXMTBUF: 2763 *val = sc->sc_tx_nobuf; 2764 break; 2765 case MAC_STAT_NORCVBUF: 2766 *val = sc->sc_rx_nobuf; 2767 break; 2768 case MAC_STAT_IERRORS: 2769 *val = sc->sc_rx_err; 2770 break; 2771 case MAC_STAT_RBYTES: 2772 *val = ic->ic_stats.is_rx_bytes; 2773 break; 2774 case MAC_STAT_IPACKETS: 2775 *val = ic->ic_stats.is_rx_frags; 2776 break; 2777 case MAC_STAT_OBYTES: 2778 *val = ic->ic_stats.is_tx_bytes; 2779 break; 2780 case MAC_STAT_OPACKETS: 2781 *val = ic->ic_stats.is_tx_frags; 2782 break; 2783 case MAC_STAT_OERRORS: 2784 case WIFI_STAT_TX_FAILED: 2785 *val = sc->sc_tx_err; 2786 break; 2787 case WIFI_STAT_TX_RETRANS: 2788 *val = sc->sc_tx_retries; 2789 break; 2790 case WIFI_STAT_FCS_ERRORS: 2791 case WIFI_STAT_WEP_ERRORS: 2792 case WIFI_STAT_TX_FRAGS: 2793 case WIFI_STAT_MCAST_TX: 2794 case WIFI_STAT_RTS_SUCCESS: 2795 case WIFI_STAT_RTS_FAILURE: 2796 case WIFI_STAT_ACK_FAILURE: 2797 case WIFI_STAT_RX_FRAGS: 2798 case WIFI_STAT_MCAST_RX: 2799 case WIFI_STAT_RX_DUPS: 2800 RT2860_GUNLOCK(sc); 2801 return (ieee80211_stat(ic, stat, val)); 2802 default: 2803 RT2860_GUNLOCK(sc); 2804 return (ENOTSUP); 2805 } 2806 RT2860_GUNLOCK(sc); 2807 2808 return (0); 2809 } 2810 2811 static int 2812 rt2860_attach(dev_info_t *devinfo, ddi_attach_cmd_t cmd) 2813 { 2814 struct rt2860_softc *sc; 2815 struct ieee80211com *ic; 2816 int i, err, qid, ntries, instance; 2817 uint8_t cachelsz; 2818 uint16_t command, vendor_id, device_id; 2819 char strbuf[32]; 2820 wifi_data_t wd = { 0 }; 2821 mac_register_t *macp; 2822 2823 switch (cmd) { 2824 case DDI_ATTACH: 2825 break; 2826 case DDI_RESUME: 2827 sc = ddi_get_soft_state(rt2860_soft_state_p, 2828 ddi_get_instance(devinfo)); 2829 ASSERT(sc != NULL); 2830 RT2860_GLOCK(sc); 2831 sc->sc_flags &= ~RT2860_F_SUSPEND; 2832 RT2860_GUNLOCK(sc); 2833 if (RT2860_IS_RUNNING(sc)) 2834 (void) rt2860_init(sc); 2835 RWN_DEBUG(RT2860_DBG_RESUME, "rwn: rt2860_attach(): " 2836 "resume now\n"); 2837 return (DDI_SUCCESS); 2838 default: 2839 return (DDI_FAILURE); 2840 } 2841 2842 instance = ddi_get_instance(devinfo); 2843 2844 err = ddi_soft_state_zalloc(rt2860_soft_state_p, instance); 2845 if (err != DDI_SUCCESS) { 2846 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2847 "unable to alloc soft_state_p\n"); 2848 return (err); 2849 } 2850 2851 sc = ddi_get_soft_state(rt2860_soft_state_p, instance); 2852 ic = (ieee80211com_t *)&sc->sc_ic; 2853 sc->sc_dev = devinfo; 2854 2855 /* pci configuration */ 2856 err = ddi_regs_map_setup(devinfo, 0, &sc->sc_cfg_base, 0, 0, 2857 &rwn_csr_accattr, &sc->sc_cfg_handle); 2858 if (err != DDI_SUCCESS) { 2859 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2860 "ddi_regs_map_setup() failed"); 2861 goto fail1; 2862 } 2863 2864 cachelsz = ddi_get8(sc->sc_cfg_handle, 2865 (uint8_t *)(sc->sc_cfg_base + PCI_CONF_CACHE_LINESZ)); 2866 if (cachelsz == 0) 2867 cachelsz = 0x10; 2868 sc->sc_cachelsz = cachelsz << 2; 2869 sc->sc_dmabuf_size = roundup(IEEE80211_MAX_LEN, sc->sc_cachelsz); 2870 2871 vendor_id = ddi_get16(sc->sc_cfg_handle, 2872 (uint16_t *)((uintptr_t)(sc->sc_cfg_base) + PCI_CONF_VENID)); 2873 device_id = ddi_get16(sc->sc_cfg_handle, 2874 (uint16_t *)((uintptr_t)(sc->sc_cfg_base) + PCI_CONF_DEVID)); 2875 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2876 "vendor 0x%x, device id 0x%x, cache size %d\n", 2877 vendor_id, device_id, cachelsz); 2878 2879 /* 2880 * Enable response to memory space accesses, 2881 * and enabe bus master. 2882 */ 2883 command = PCI_COMM_MAE | PCI_COMM_ME; 2884 ddi_put16(sc->sc_cfg_handle, 2885 (uint16_t *)((uintptr_t)(sc->sc_cfg_base) + PCI_CONF_COMM), 2886 command); 2887 ddi_put8(sc->sc_cfg_handle, 2888 (uint8_t *)(sc->sc_cfg_base + PCI_CONF_LATENCY_TIMER), 0xa8); 2889 ddi_put8(sc->sc_cfg_handle, 2890 (uint8_t *)(sc->sc_cfg_base + PCI_CONF_ILINE), 0x10); 2891 2892 /* pci i/o space */ 2893 err = ddi_regs_map_setup(devinfo, 1, 2894 &sc->sc_io_base, 0, 0, &rwn_csr_accattr, &sc->sc_io_handle); 2895 if (err != DDI_SUCCESS) { 2896 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2897 "ddi_regs_map_setup() failed"); 2898 goto fail2; 2899 } 2900 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2901 "PCI configuration is done successfully\n"); 2902 2903 sc->amrr.amrr_min_success_threshold = 1; 2904 sc->amrr.amrr_max_success_threshold = 15; 2905 2906 /* wait for NIC to initialize */ 2907 for (ntries = 0; ntries < 100; ntries++) { 2908 sc->mac_rev = RT2860_READ(sc, RT2860_ASIC_VER_ID); 2909 if (sc->mac_rev != 0 && sc->mac_rev != 0xffffffff) 2910 break; 2911 DELAY(10); 2912 } 2913 if (ntries == 100) { 2914 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2915 "timeout waiting for NIC initialize\n"); 2916 return (DDI_FAILURE); 2917 } 2918 2919 if ((sc->mac_rev >> 16) != 0x2860 && 2920 (device_id == PRODUCT_RALINK_RT2890 || 2921 device_id == PRODUCT_RALINK_RT2790 || 2922 device_id == PRODUCT_AWT_RT2890)) 2923 sc->sc_flags |= RT2860_ADVANCED_PS; 2924 2925 /* retrieve RF rev. no and various other things from EEPROM */ 2926 (void) rt2860_read_eeprom(sc); 2927 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2928 "MAC/BBP RT%X (rev 0x%04X), RF %s (%dT%dR)\n", 2929 sc->mac_rev >> 16, sc->mac_rev & 0xffff, 2930 rt2860_get_rf(sc->rf_rev), sc->ntxchains, sc->nrxchains); 2931 2932 /* 2933 * Allocate Tx (4 EDCAs + HCCA + Mgt) and Rx rings. 2934 */ 2935 for (qid = 0; qid < 6; qid++) { 2936 if ((err = rt2860_alloc_tx_ring(sc, &sc->txq[qid])) != 0) { 2937 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2938 "could not allocate Tx ring %d\n", qid); 2939 goto fail3; 2940 } 2941 } 2942 2943 if ((err = rt2860_alloc_rx_ring(sc, &sc->rxq)) != 0) { 2944 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2945 "could not allocte Rx ring\n"); 2946 goto fail4; 2947 } 2948 2949 if ((err = rt2860_alloc_tx_pool(sc)) != 0) { 2950 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2951 "could not allocte Tx pool\n"); 2952 goto fail5; 2953 } 2954 2955 mutex_init(&sc->sc_genlock, NULL, MUTEX_DRIVER, NULL); 2956 mutex_init(&sc->sc_txlock, NULL, MUTEX_DRIVER, NULL); 2957 mutex_init(&sc->sc_rxlock, NULL, MUTEX_DRIVER, NULL); 2958 2959 /* mgmt ring is broken on RT2860C, use EDCA AC VO ring instead */ 2960 sc->mgtqid = (sc->mac_rev == 0x28600100) ? EDCA_AC_VO : 5; 2961 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach():" 2962 "mgtqid = %x\n", sc->mgtqid); 2963 2964 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 2965 ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ 2966 ic->ic_state = IEEE80211_S_INIT; 2967 2968 /* set device capabilities */ 2969 ic->ic_caps = 2970 IEEE80211_C_TXPMGT | /* tx power management */ 2971 IEEE80211_C_SHPREAMBLE | /* short preamble supported */ 2972 IEEE80211_C_SHSLOT; /* short slot time supported */ 2973 2974 /* WPA/WPA2 support */ 2975 ic->ic_caps |= IEEE80211_C_WPA; /* Support WPA/WPA2 */ 2976 2977 /* set supported .11b and .11g rates */ 2978 ic->ic_sup_rates[IEEE80211_MODE_11B] = rt2860_rateset_11b; 2979 ic->ic_sup_rates[IEEE80211_MODE_11G] = rt2860_rateset_11g; 2980 2981 /* set supported .11b and .11g channels (1 through 14) */ 2982 for (i = 1; i <= 14; i++) { 2983 ic->ic_sup_channels[i].ich_freq = 2984 ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ); 2985 ic->ic_sup_channels[i].ich_flags = 2986 IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | 2987 IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ; 2988 } 2989 2990 ic->ic_maxrssi = 63; 2991 ic->ic_xmit = rt2860_send; 2992 2993 ieee80211_attach(ic); 2994 2995 /* register WPA door */ 2996 ieee80211_register_door(ic, ddi_driver_name(devinfo), 2997 ddi_get_instance(devinfo)); 2998 2999 /* override state transition machine */ 3000 sc->sc_newstate = ic->ic_newstate; 3001 ic->ic_newstate = rt2860_newstate; 3002 ieee80211_media_init(ic); 3003 ic->ic_def_txkey = 0; 3004 3005 err = ddi_add_softintr(devinfo, DDI_SOFTINT_LOW, 3006 &sc->sc_softintr_hdl, NULL, 0, rt2860_softintr, (caddr_t)sc); 3007 if (err != DDI_SUCCESS) { 3008 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 3009 "ddi_add_softintr() failed"); 3010 goto fail8; 3011 } 3012 3013 err = ddi_get_iblock_cookie(devinfo, 0, &sc->sc_iblock); 3014 if (err != DDI_SUCCESS) { 3015 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 3016 "Can not get iblock cookie for INT\n"); 3017 goto fail7; 3018 } 3019 3020 err = ddi_add_intr(devinfo, 0, NULL, NULL, rt2860_intr, (caddr_t)sc); 3021 if (err != DDI_SUCCESS) { 3022 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 3023 "unable to add device interrupt handler\n"); 3024 goto fail7; 3025 } 3026 3027 /* 3028 * Provide initial settings for the WiFi plugin; whenever this 3029 * information changes, we need to call mac_plugindata_update() 3030 */ 3031 wd.wd_opmode = ic->ic_opmode; 3032 wd.wd_secalloc = WIFI_SEC_NONE; 3033 IEEE80211_ADDR_COPY(wd.wd_bssid, ic->ic_bss->in_bssid); 3034 3035 if ((macp = mac_alloc(MAC_VERSION)) == NULL) { 3036 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 3037 "MAC version mismatch\n"); 3038 goto fail9; 3039 } 3040 3041 macp->m_type_ident = MAC_PLUGIN_IDENT_WIFI; 3042 macp->m_driver = sc; 3043 macp->m_dip = devinfo; 3044 macp->m_src_addr = ic->ic_macaddr; 3045 macp->m_callbacks = &rt2860_m_callbacks; 3046 macp->m_min_sdu = 0; 3047 macp->m_max_sdu = IEEE80211_MTU; 3048 macp->m_pdata = &wd; 3049 macp->m_pdata_size = sizeof (wd); 3050 3051 err = mac_register(macp, &ic->ic_mach); 3052 mac_free(macp); 3053 if (err != 0) { 3054 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 3055 "mac_register err %x\n", err); 3056 goto fail9; 3057 } 3058 3059 /* 3060 * Create minor node of type DDI_NT_NET_WIFI 3061 */ 3062 (void) snprintf(strbuf, sizeof (strbuf), "%s%d", 3063 "rwn", instance); 3064 err = ddi_create_minor_node(devinfo, strbuf, S_IFCHR, 3065 instance + 1, DDI_NT_NET_WIFI, 0); 3066 3067 /* 3068 * Notify link is down now 3069 */ 3070 mac_link_update(ic->ic_mach, LINK_STATE_DOWN); 3071 3072 sc->sc_flags &= ~RT2860_F_RUNNING; 3073 3074 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach() successfully.\n"); 3075 return (DDI_SUCCESS); 3076 fail9: 3077 ddi_remove_softintr(sc->sc_softintr_hdl); 3078 fail8: 3079 ddi_remove_intr(devinfo, 0, sc->sc_iblock); 3080 fail7: 3081 mutex_destroy(&sc->sc_genlock); 3082 mutex_destroy(&sc->sc_txlock); 3083 mutex_destroy(&sc->sc_rxlock); 3084 fail6: 3085 rt2860_free_tx_pool(sc); 3086 fail5: 3087 rt2860_free_rx_ring(sc, &sc->rxq); 3088 fail4: 3089 while (--qid >= 0) 3090 rt2860_free_tx_ring(sc, &sc->txq[qid]); 3091 fail3: 3092 ddi_regs_map_free(&sc->sc_io_handle); 3093 fail2: 3094 ddi_regs_map_free(&sc->sc_cfg_handle); 3095 fail1: 3096 return (err); 3097 } 3098 3099 static int 3100 rt2860_detach(dev_info_t *devinfo, ddi_detach_cmd_t cmd) 3101 { 3102 struct rt2860_softc *sc; 3103 int qid; 3104 3105 sc = ddi_get_soft_state(rt2860_soft_state_p, ddi_get_instance(devinfo)); 3106 3107 switch (cmd) { 3108 case DDI_DETACH: 3109 break; 3110 case DDI_SUSPEND: 3111 if (RT2860_IS_RUNNING(sc)) 3112 rt2860_stop(sc); 3113 RT2860_GLOCK(sc); 3114 sc->sc_flags &= ~RT2860_FWLOADED; 3115 sc->sc_flags |= RT2860_F_SUSPEND; 3116 RT2860_GUNLOCK(sc); 3117 RWN_DEBUG(RT2860_DBG_RESUME, "rwn: rt2860_detach(): " 3118 "suspend now\n"); 3119 return (DDI_SUCCESS); 3120 default: 3121 return (DDI_FAILURE); 3122 } 3123 3124 if (mac_disable(sc->sc_ic.ic_mach) != 0) 3125 return (DDI_FAILURE); 3126 3127 rt2860_stop(sc); 3128 3129 /* 3130 * Unregister from the MAC layer subsystem 3131 */ 3132 (void) mac_unregister(sc->sc_ic.ic_mach); 3133 3134 ddi_remove_intr(devinfo, 0, sc->sc_iblock); 3135 ddi_remove_softintr(sc->sc_softintr_hdl); 3136 3137 /* 3138 * detach ieee80211 layer 3139 */ 3140 ieee80211_detach(&sc->sc_ic); 3141 3142 rt2860_free_tx_pool(sc); 3143 rt2860_free_rx_ring(sc, &sc->rxq); 3144 for (qid = 0; qid < 6; qid++) 3145 rt2860_free_tx_ring(sc, &sc->txq[qid]); 3146 3147 ddi_regs_map_free(&sc->sc_io_handle); 3148 3149 mutex_destroy(&sc->sc_genlock); 3150 mutex_destroy(&sc->sc_txlock); 3151 mutex_destroy(&sc->sc_rxlock); 3152 3153 ddi_remove_minor_node(devinfo, NULL); 3154 ddi_soft_state_free(rt2860_soft_state_p, ddi_get_instance(devinfo)); 3155 3156 return (DDI_SUCCESS); 3157 } 3158 3159 int 3160 _info(struct modinfo *modinfop) 3161 { 3162 return (mod_info(&modlinkage, modinfop)); 3163 } 3164 3165 int 3166 _init(void) 3167 { 3168 int status; 3169 3170 status = ddi_soft_state_init(&rt2860_soft_state_p, 3171 sizeof (struct rt2860_softc), 1); 3172 if (status != 0) 3173 return (status); 3174 3175 mac_init_ops(&rwn_dev_ops, "rwn"); 3176 status = mod_install(&modlinkage); 3177 if (status != 0) { 3178 mac_fini_ops(&rwn_dev_ops); 3179 ddi_soft_state_fini(&rt2860_soft_state_p); 3180 } 3181 return (status); 3182 } 3183 3184 int 3185 _fini(void) 3186 { 3187 int status; 3188 3189 status = mod_remove(&modlinkage); 3190 if (status == 0) { 3191 mac_fini_ops(&rwn_dev_ops); 3192 ddi_soft_state_fini(&rt2860_soft_state_p); 3193 } 3194 return (status); 3195 } 3196