xref: /titanic_41/usr/src/uts/common/io/nxge/nxge_virtual.c (revision b509e89b2befbaa42939abad9da1d7f5a8c6aaae)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #include <sys/nxge/nxge_impl.h>
27 #include <sys/nxge/nxge_mac.h>
28 #include <sys/nxge/nxge_hio.h>
29 
30 /*
31  * Local defines for FWARC 2006/556
32  */
33 #define	NXGE_NIU_TDMA_PROP_LEN		2
34 #define	NXGE_NIU_RDMA_PROP_LEN		2
35 #define	NXGE_NIU_0_INTR_PROP_LEN	19
36 #define	NXGE_NIU_1_INTR_PROP_LEN	17
37 
38 /*
39  * Local functions.
40  */
41 static void nxge_get_niu_property(dev_info_t *, niu_type_t *);
42 static nxge_status_t nxge_get_mac_addr_properties(p_nxge_t);
43 static nxge_status_t nxge_use_cfg_n2niu_properties(p_nxge_t);
44 static void nxge_use_cfg_neptune_properties(p_nxge_t);
45 static void nxge_use_cfg_dma_config(p_nxge_t);
46 static void nxge_use_cfg_vlan_class_config(p_nxge_t);
47 static void nxge_use_cfg_mac_class_config(p_nxge_t);
48 static void nxge_use_cfg_class_config(p_nxge_t);
49 static void nxge_use_cfg_link_cfg(p_nxge_t);
50 static void nxge_set_hw_dma_config(p_nxge_t);
51 static void nxge_set_hw_vlan_class_config(p_nxge_t);
52 static void nxge_set_hw_mac_class_config(p_nxge_t);
53 static void nxge_set_hw_class_config(p_nxge_t);
54 static nxge_status_t nxge_use_default_dma_config_n2(p_nxge_t);
55 static void nxge_ldgv_setup(p_nxge_ldg_t *, p_nxge_ldv_t *, uint8_t,
56 	uint8_t, int *);
57 static void nxge_init_mmac(p_nxge_t, boolean_t);
58 static void nxge_set_rdc_intr_property(p_nxge_t);
59 
60 uint32_t nxge_use_hw_property = 1;
61 uint32_t nxge_groups_per_port = 2;
62 
63 extern uint32_t nxge_use_partition;
64 extern uint32_t nxge_dma_obp_props_only;
65 
66 extern uint_t nxge_rx_intr(void *, void *);
67 extern uint_t nxge_tx_intr(void *, void *);
68 extern uint_t nxge_mif_intr(void *, void *);
69 extern uint_t nxge_mac_intr(void *, void *);
70 extern uint_t nxge_syserr_intr(void *, void *);
71 extern void *nxge_list;
72 
73 #define	NXGE_SHARED_REG_SW_SIM
74 
75 #ifdef NXGE_SHARED_REG_SW_SIM
76 uint64_t global_dev_ctrl = 0;
77 #endif
78 
79 #define	MAX_SIBLINGS	NXGE_MAX_PORTS
80 
81 extern uint32_t nxge_rbr_size;
82 extern uint32_t nxge_rcr_size;
83 extern uint32_t nxge_tx_ring_size;
84 extern uint32_t nxge_rbr_spare_size;
85 
86 extern npi_status_t npi_mac_altaddr_disable(npi_handle_t, uint8_t, uint8_t);
87 
88 static uint8_t p2_tx_fair[2] = {12, 12};
89 static uint8_t p2_tx_equal[2] = {12, 12};
90 static uint8_t p4_tx_fair[4] = {6, 6, 6, 6};
91 static uint8_t p4_tx_equal[4] = {6, 6, 6, 6};
92 static uint8_t p2_rx_fair[2] = {8, 8};
93 static uint8_t p2_rx_equal[2] = {8, 8};
94 static uint8_t p4_rx_fair[4] = {4, 4, 4, 4};
95 static uint8_t p4_rx_equal[4] = {4, 4, 4, 4};
96 
97 static uint8_t p2_rdcgrp_fair[2] = {4, 4};
98 static uint8_t p2_rdcgrp_equal[2] = {4, 4};
99 static uint8_t p4_rdcgrp_fair[4] = {2, 2, 1, 1};
100 static uint8_t p4_rdcgrp_equal[4] = {2, 2, 2, 2};
101 static uint8_t p2_rdcgrp_cls[2] = {1, 1};
102 static uint8_t p4_rdcgrp_cls[4] = {1, 1, 1, 1};
103 
104 static uint8_t rx_4_1G[4] = {4, 4, 4, 4};
105 static uint8_t rx_2_10G[2] = {8, 8};
106 static uint8_t rx_2_10G_2_1G[4] = {6, 6, 2, 2};
107 static uint8_t rx_1_10G_3_1G[4] = {10, 2, 2, 2};
108 static uint8_t rx_1_1G_1_10G_2_1G[4] = {2, 10, 2, 2};
109 
110 static uint8_t tx_4_1G[4] = {6, 6, 6, 6};
111 static uint8_t tx_2_10G[2] = {12, 12};
112 static uint8_t tx_2_10G_2_1G[4] = {10, 10, 2, 2};
113 static uint8_t tx_1_10G_3_1G[4] = {12, 4, 4, 4};
114 static uint8_t tx_1_1G_1_10G_2_1G[4] = {4, 12, 4, 4};
115 
116 typedef enum {
117 	DEFAULT = 0,
118 	EQUAL,
119 	FAIR,
120 	CUSTOM,
121 	CLASSIFY,
122 	L2_CLASSIFY,
123 	L3_DISTRIBUTE,
124 	L3_CLASSIFY,
125 	L3_TCAM,
126 	CONFIG_TOKEN_NONE
127 } config_token_t;
128 
129 static char *token_names[] = {
130 	"default",
131 	"equal",
132 	"fair",
133 	"custom",
134 	"classify",
135 	"l2_classify",
136 	"l3_distribute",
137 	"l3_classify",
138 	"l3_tcam",
139 	"none",
140 };
141 
142 void nxge_virint_regs_dump(p_nxge_t nxgep);
143 
144 void
145 nxge_virint_regs_dump(p_nxge_t nxgep)
146 {
147 	npi_handle_t handle;
148 
149 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_virint_regs_dump"));
150 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
151 	(void) npi_vir_dump_pio_fzc_regs_one(handle);
152 	(void) npi_vir_dump_ldgnum(handle);
153 	(void) npi_vir_dump_ldsv(handle);
154 	(void) npi_vir_dump_imask0(handle);
155 	(void) npi_vir_dump_sid(handle);
156 	(void) npi_mac_dump_regs(handle, nxgep->function_num);
157 	(void) npi_ipp_dump_regs(handle, nxgep->function_num);
158 	(void) npi_fflp_dump_regs(handle);
159 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_virint_regs_dump"));
160 }
161 
162 /*
163  * For now: we hard coded the DMA configurations.
164  *	    and assume for one partition only.
165  *
166  *       OBP. Then OBP will pass this partition's
167  *	 Neptune configurations to fcode to create
168  *	 properties for them.
169  *
170  *	Since Neptune(PCI-E) and NIU (Niagara-2) has
171  *	different bus interfaces, the driver needs
172  *	to know which bus it is connected to.
173  *  	Ravinder suggested: create a device property.
174  *	In partitioning environment, we cannot
175  *	use .conf file (need to check). If conf changes,
176  *	need to reboot the system.
177  *	The following function assumes that we will
178  *	retrieve its properties from a virtualized nexus driver.
179  */
180 
181 nxge_status_t
182 nxge_cntlops(dev_info_t *dip, nxge_ctl_enum_t ctlop, void *arg, void *result)
183 {
184 	nxge_status_t status = NXGE_OK;
185 	int instance;
186 	p_nxge_t nxgep;
187 
188 #ifndef NXGE_SHARED_REG_SW_SIM
189 	npi_handle_t handle;
190 	uint16_t sr16, cr16;
191 #endif
192 	instance = ddi_get_instance(dip);
193 	NXGE_DEBUG_MSG((NULL, VIR_CTL, "Instance %d ", instance));
194 
195 	if (nxge_list == NULL) {
196 		NXGE_ERROR_MSG((NULL, NXGE_ERR_CTL,
197 		    "nxge_cntlops: nxge_list null"));
198 		return (NXGE_ERROR);
199 	}
200 	nxgep = (p_nxge_t)ddi_get_soft_state(nxge_list, instance);
201 	if (nxgep == NULL) {
202 		NXGE_ERROR_MSG((NULL, NXGE_ERR_CTL,
203 		    "nxge_cntlops: nxgep null"));
204 		return (NXGE_ERROR);
205 	}
206 #ifndef NXGE_SHARED_REG_SW_SIM
207 	handle = nxgep->npi_reg_handle;
208 #endif
209 	switch (ctlop) {
210 	case NXGE_CTLOPS_NIUTYPE:
211 		nxge_get_niu_property(dip, (niu_type_t *)result);
212 		return (status);
213 
214 	case NXGE_CTLOPS_GET_SHARED_REG:
215 #ifdef NXGE_SHARED_REG_SW_SIM
216 		*(uint64_t *)result = global_dev_ctrl;
217 		return (0);
218 #else
219 		status = npi_dev_func_sr_sr_get(handle, &sr16);
220 		*(uint16_t *)result = sr16;
221 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
222 		    "nxge_cntlops: NXGE_CTLOPS_GET_SHARED_REG"));
223 		return (0);
224 #endif
225 
226 	case NXGE_CTLOPS_SET_SHARED_REG_LOCK:
227 #ifdef NXGE_SHARED_REG_SW_SIM
228 		global_dev_ctrl = *(uint64_t *)arg;
229 		return (0);
230 #else
231 		status = NPI_FAILURE;
232 		while (status != NPI_SUCCESS)
233 			status = npi_dev_func_sr_lock_enter(handle);
234 
235 		sr16 = *(uint16_t *)arg;
236 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
237 		status = npi_dev_func_sr_lock_free(handle);
238 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
239 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
240 		return (0);
241 #endif
242 
243 	case NXGE_CTLOPS_UPDATE_SHARED_REG:
244 #ifdef NXGE_SHARED_REG_SW_SIM
245 		global_dev_ctrl |= *(uint64_t *)arg;
246 		return (0);
247 #else
248 		status = NPI_FAILURE;
249 		while (status != NPI_SUCCESS)
250 			status = npi_dev_func_sr_lock_enter(handle);
251 		status = npi_dev_func_sr_sr_get(handle, &sr16);
252 		sr16 |= *(uint16_t *)arg;
253 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
254 		status = npi_dev_func_sr_lock_free(handle);
255 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
256 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
257 		return (0);
258 #endif
259 
260 	case NXGE_CTLOPS_CLEAR_BIT_SHARED_REG_UL:
261 #ifdef NXGE_SHARED_REG_SW_SIM
262 		global_dev_ctrl |= *(uint64_t *)arg;
263 		return (0);
264 #else
265 		status = npi_dev_func_sr_sr_get(handle, &sr16);
266 		cr16 = *(uint16_t *)arg;
267 		sr16 &= ~cr16;
268 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
269 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
270 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
271 		return (0);
272 #endif
273 
274 	case NXGE_CTLOPS_CLEAR_BIT_SHARED_REG:
275 #ifdef NXGE_SHARED_REG_SW_SIM
276 		global_dev_ctrl |= *(uint64_t *)arg;
277 		return (0);
278 #else
279 		status = NPI_FAILURE;
280 		while (status != NPI_SUCCESS)
281 			status = npi_dev_func_sr_lock_enter(handle);
282 		status = npi_dev_func_sr_sr_get(handle, &sr16);
283 		cr16 = *(uint16_t *)arg;
284 		sr16 &= ~cr16;
285 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
286 		status = npi_dev_func_sr_lock_free(handle);
287 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
288 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
289 		return (0);
290 #endif
291 
292 	case NXGE_CTLOPS_GET_LOCK_BLOCK:
293 #ifdef NXGE_SHARED_REG_SW_SIM
294 		global_dev_ctrl |= *(uint64_t *)arg;
295 		return (0);
296 #else
297 		status = NPI_FAILURE;
298 		while (status != NPI_SUCCESS)
299 			status = npi_dev_func_sr_lock_enter(handle);
300 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
301 		    "nxge_cntlops: NXGE_CTLOPS_GET_LOCK_BLOCK"));
302 		return (0);
303 #endif
304 	case NXGE_CTLOPS_GET_LOCK_TRY:
305 #ifdef NXGE_SHARED_REG_SW_SIM
306 		global_dev_ctrl |= *(uint64_t *)arg;
307 		return (0);
308 #else
309 		status = npi_dev_func_sr_lock_enter(handle);
310 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
311 		    "nxge_cntlops: NXGE_CTLOPS_GET_LOCK_TRY"));
312 		if (status == NPI_SUCCESS)
313 			return (NXGE_OK);
314 		else
315 			return (NXGE_ERROR);
316 #endif
317 	case NXGE_CTLOPS_FREE_LOCK:
318 #ifdef NXGE_SHARED_REG_SW_SIM
319 		global_dev_ctrl |= *(uint64_t *)arg;
320 		return (0);
321 #else
322 		status = npi_dev_func_sr_lock_free(handle);
323 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
324 		    "nxge_cntlops: NXGE_CTLOPS_GET_LOCK_FREE"));
325 		if (status == NPI_SUCCESS)
326 			return (NXGE_OK);
327 		else
328 			return (NXGE_ERROR);
329 #endif
330 
331 	default:
332 		status = NXGE_ERROR;
333 	}
334 
335 	return (status);
336 }
337 
338 void
339 nxge_common_lock_get(p_nxge_t nxgep)
340 {
341 	uint32_t status = NPI_FAILURE;
342 	npi_handle_t handle;
343 
344 #if	defined(NXGE_SHARE_REG_SW_SIM)
345 	return;
346 #endif
347 	handle = nxgep->npi_reg_handle;
348 	while (status != NPI_SUCCESS)
349 		status = npi_dev_func_sr_lock_enter(handle);
350 }
351 
352 void
353 nxge_common_lock_free(p_nxge_t nxgep)
354 {
355 	npi_handle_t handle;
356 
357 #if	defined(NXGE_SHARE_REG_SW_SIM)
358 	return;
359 #endif
360 	handle = nxgep->npi_reg_handle;
361 	(void) npi_dev_func_sr_lock_free(handle);
362 }
363 
364 
365 static void
366 nxge_get_niu_property(dev_info_t *dip, niu_type_t *niu_type)
367 {
368 	uchar_t *prop_val;
369 	uint_t prop_len;
370 
371 	*niu_type = NIU_TYPE_NONE;
372 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0,
373 	    "niu-type", (uchar_t **)&prop_val,
374 	    &prop_len) == DDI_PROP_SUCCESS) {
375 		if (strncmp("niu", (caddr_t)prop_val, (size_t)prop_len) == 0) {
376 			*niu_type = N2_NIU;
377 		}
378 		ddi_prop_free(prop_val);
379 	}
380 }
381 
382 static config_token_t
383 nxge_get_config_token(char *prop)
384 {
385 	config_token_t token = DEFAULT;
386 
387 	while (token < CONFIG_TOKEN_NONE) {
388 		if (strncmp(prop, token_names[token], 4) == 0)
389 			break;
390 		token++;
391 	}
392 	return (token);
393 }
394 
395 /* per port */
396 
397 static nxge_status_t
398 nxge_update_rxdma_grp_properties(p_nxge_t nxgep, config_token_t token,
399 	dev_info_t *s_dip[])
400 {
401 	nxge_status_t status = NXGE_OK;
402 	int ddi_status;
403 	int num_ports = nxgep->nports;
404 	int port, bits, j;
405 	uint8_t start_grp = 0, num_grps = 0;
406 	p_nxge_param_t param_arr;
407 	uint32_t grp_bitmap[MAX_SIBLINGS];
408 	int custom_start_grp[MAX_SIBLINGS];
409 	int custom_num_grp[MAX_SIBLINGS];
410 	uint8_t bad_config = B_FALSE;
411 	char *start_prop, *num_prop, *cfg_prop;
412 
413 	start_grp = 0;
414 	param_arr = nxgep->param_arr;
415 	start_prop = param_arr[param_rdc_grps_start].fcode_name;
416 	num_prop = param_arr[param_rx_rdc_grps].fcode_name;
417 
418 	switch (token) {
419 	case FAIR:
420 		cfg_prop = "fair";
421 		for (port = 0; port < num_ports; port++) {
422 			custom_num_grp[port] =
423 			    (num_ports == 4) ?
424 			    p4_rdcgrp_fair[port] :
425 			    p2_rdcgrp_fair[port];
426 			custom_start_grp[port] = start_grp;
427 			start_grp += custom_num_grp[port];
428 		}
429 		break;
430 
431 	case EQUAL:
432 		cfg_prop = "equal";
433 		for (port = 0; port < num_ports; port++) {
434 			custom_num_grp[port] =
435 			    (num_ports == 4) ?
436 			    p4_rdcgrp_equal[port] :
437 			    p2_rdcgrp_equal[port];
438 			custom_start_grp[port] = start_grp;
439 			start_grp += custom_num_grp[port];
440 		}
441 		break;
442 
443 
444 	case CLASSIFY:
445 		cfg_prop = "classify";
446 		for (port = 0; port < num_ports; port++) {
447 			custom_num_grp[port] = (num_ports == 4) ?
448 			    p4_rdcgrp_cls[port] : p2_rdcgrp_cls[port];
449 			custom_start_grp[port] = start_grp;
450 			start_grp += custom_num_grp[port];
451 		}
452 		break;
453 
454 	case CUSTOM:
455 		cfg_prop = "custom";
456 		/* See if it is good config */
457 		num_grps = 0;
458 		for (port = 0; port < num_ports; port++) {
459 			custom_start_grp[port] =
460 			    ddi_prop_get_int(DDI_DEV_T_NONE, s_dip[port],
461 			    DDI_PROP_DONTPASS, start_prop, -1);
462 			if ((custom_start_grp[port] == -1) ||
463 			    (custom_start_grp[port] >=
464 			    NXGE_MAX_RDC_GRPS)) {
465 				bad_config = B_TRUE;
466 				break;
467 			}
468 			custom_num_grp[port] = ddi_prop_get_int(
469 			    DDI_DEV_T_NONE,
470 			    s_dip[port],
471 			    DDI_PROP_DONTPASS,
472 			    num_prop, -1);
473 
474 			if ((custom_num_grp[port] == -1) ||
475 			    (custom_num_grp[port] >
476 			    NXGE_MAX_RDC_GRPS) ||
477 			    ((custom_num_grp[port] +
478 			    custom_start_grp[port]) >=
479 			    NXGE_MAX_RDC_GRPS)) {
480 				bad_config = B_TRUE;
481 				break;
482 			}
483 			num_grps += custom_num_grp[port];
484 			if (num_grps > NXGE_MAX_RDC_GRPS) {
485 				bad_config = B_TRUE;
486 				break;
487 			}
488 			grp_bitmap[port] = 0;
489 			for (bits = 0;
490 			    bits < custom_num_grp[port];
491 			    bits++) {
492 				grp_bitmap[port] |=
493 				    (1 << (bits + custom_start_grp[port]));
494 			}
495 
496 		}
497 
498 		if (bad_config == B_FALSE) {
499 			/* check for overlap */
500 			for (port = 0; port < num_ports - 1; port++) {
501 				for (j = port + 1; j < num_ports; j++) {
502 					if (grp_bitmap[port] &
503 					    grp_bitmap[j]) {
504 						bad_config = B_TRUE;
505 						break;
506 					}
507 				}
508 				if (bad_config == B_TRUE)
509 					break;
510 			}
511 		}
512 		if (bad_config == B_TRUE) {
513 			/* use default config */
514 			for (port = 0; port < num_ports; port++) {
515 				custom_num_grp[port] =
516 				    (num_ports == 4) ?
517 				    p4_rx_fair[port] : p2_rx_fair[port];
518 				custom_start_grp[port] = start_grp;
519 				start_grp += custom_num_grp[port];
520 			}
521 		}
522 		break;
523 
524 	default:
525 		/* use default config */
526 		cfg_prop = "fair";
527 		for (port = 0; port < num_ports; port++) {
528 			custom_num_grp[port] = (num_ports == 4) ?
529 			    p4_rx_fair[port] : p2_rx_fair[port];
530 			custom_start_grp[port] = start_grp;
531 			start_grp += custom_num_grp[port];
532 		}
533 		break;
534 	}
535 
536 	/* Now Update the rx properties */
537 	for (port = 0; port < num_ports; port++) {
538 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
539 		    "rxdma-grp-cfg", cfg_prop);
540 		if (ddi_status != DDI_PROP_SUCCESS) {
541 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
542 			    " property %s not updating",
543 			    cfg_prop));
544 			status |= NXGE_DDI_FAILED;
545 		}
546 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
547 		    num_prop, custom_num_grp[port]);
548 
549 		if (ddi_status != DDI_PROP_SUCCESS) {
550 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
551 			    " property %s not updating",
552 			    num_prop));
553 			status |= NXGE_DDI_FAILED;
554 		}
555 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
556 		    start_prop, custom_start_grp[port]);
557 
558 		if (ddi_status != DDI_PROP_SUCCESS) {
559 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
560 			    " property %s not updating",
561 			    start_prop));
562 			status |= NXGE_DDI_FAILED;
563 		}
564 	}
565 	if (status & NXGE_DDI_FAILED)
566 		status |= NXGE_ERROR;
567 
568 	return (status);
569 }
570 
571 static nxge_status_t
572 nxge_update_rxdma_properties(p_nxge_t nxgep, config_token_t token,
573 	dev_info_t *s_dip[])
574 {
575 	nxge_status_t status = NXGE_OK;
576 	int ddi_status;
577 	int num_ports = nxgep->nports;
578 	int port, bits, j;
579 	uint8_t start_rdc = 0, num_rdc = 0;
580 	p_nxge_param_t param_arr;
581 	uint32_t rdc_bitmap[MAX_SIBLINGS];
582 	int custom_start_rdc[MAX_SIBLINGS];
583 	int custom_num_rdc[MAX_SIBLINGS];
584 	uint8_t bad_config = B_FALSE;
585 	int *prop_val;
586 	uint_t prop_len;
587 	char *start_rdc_prop, *num_rdc_prop, *cfg_prop;
588 
589 	start_rdc = 0;
590 	param_arr = nxgep->param_arr;
591 	start_rdc_prop = param_arr[param_rxdma_channels_begin].fcode_name;
592 	num_rdc_prop = param_arr[param_rxdma_channels].fcode_name;
593 
594 	switch (token) {
595 	case FAIR:
596 		cfg_prop = "fair";
597 		for (port = 0; port < num_ports; port++) {
598 			custom_num_rdc[port] = (num_ports == 4) ?
599 			    p4_rx_fair[port] : p2_rx_fair[port];
600 			custom_start_rdc[port] = start_rdc;
601 			start_rdc += custom_num_rdc[port];
602 		}
603 		break;
604 
605 	case EQUAL:
606 		cfg_prop = "equal";
607 		for (port = 0; port < num_ports; port++) {
608 			custom_num_rdc[port] = (num_ports == 4) ?
609 			    p4_rx_equal[port] :
610 			    p2_rx_equal[port];
611 			custom_start_rdc[port] = start_rdc;
612 			start_rdc += custom_num_rdc[port];
613 		}
614 		break;
615 
616 	case CUSTOM:
617 		cfg_prop = "custom";
618 		/* See if it is good config */
619 		num_rdc = 0;
620 		for (port = 0; port < num_ports; port++) {
621 			ddi_status = ddi_prop_lookup_int_array(
622 			    DDI_DEV_T_ANY,
623 			    s_dip[port], 0,
624 			    start_rdc_prop,
625 			    &prop_val,
626 			    &prop_len);
627 			if (ddi_status == DDI_SUCCESS)
628 				custom_start_rdc[port] = *prop_val;
629 			else {
630 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
631 				    " %s custom start port %d"
632 				    " read failed ",
633 				    " rxdma-cfg", port));
634 				bad_config = B_TRUE;
635 				status |= NXGE_DDI_FAILED;
636 			}
637 			if ((custom_start_rdc[port] == -1) ||
638 			    (custom_start_rdc[port] >=
639 			    NXGE_MAX_RDCS)) {
640 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
641 				    " %s custom start %d"
642 				    " out of range %x ",
643 				    " rxdma-cfg",
644 				    port,
645 				    custom_start_rdc[port]));
646 				bad_config = B_TRUE;
647 				break;
648 			}
649 			ddi_status = ddi_prop_lookup_int_array(
650 			    DDI_DEV_T_ANY,
651 			    s_dip[port],
652 			    0,
653 			    num_rdc_prop,
654 			    &prop_val,
655 			    &prop_len);
656 
657 			if (ddi_status == DDI_SUCCESS)
658 				custom_num_rdc[port] = *prop_val;
659 			else {
660 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
661 				    " %s custom num port %d"
662 				    " read failed ",
663 				    "rxdma-cfg", port));
664 				bad_config = B_TRUE;
665 				status |= NXGE_DDI_FAILED;
666 			}
667 
668 			if ((custom_num_rdc[port] == -1) ||
669 			    (custom_num_rdc[port] >
670 			    NXGE_MAX_RDCS) ||
671 			    ((custom_num_rdc[port] +
672 			    custom_start_rdc[port]) >
673 			    NXGE_MAX_RDCS)) {
674 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
675 				    " %s custom num %d"
676 				    " out of range %x ",
677 				    " rxdma-cfg",
678 				    port, custom_num_rdc[port]));
679 				bad_config = B_TRUE;
680 				break;
681 			}
682 			num_rdc += custom_num_rdc[port];
683 			if (num_rdc > NXGE_MAX_RDCS) {
684 				bad_config = B_TRUE;
685 				break;
686 			}
687 			rdc_bitmap[port] = 0;
688 			for (bits = 0;
689 			    bits < custom_num_rdc[port]; bits++) {
690 				rdc_bitmap[port] |=
691 				    (1 << (bits + custom_start_rdc[port]));
692 			}
693 		}
694 
695 		if (bad_config == B_FALSE) {
696 			/* check for overlap */
697 			for (port = 0; port < num_ports - 1; port++) {
698 				for (j = port + 1; j < num_ports; j++) {
699 					if (rdc_bitmap[port] &
700 					    rdc_bitmap[j]) {
701 						NXGE_DEBUG_MSG((nxgep,
702 						    CFG_CTL,
703 						    " rxdma-cfg"
704 						    " property custom"
705 						    " bit overlap"
706 						    " %d %d ",
707 						    port, j));
708 						bad_config = B_TRUE;
709 						break;
710 					}
711 				}
712 				if (bad_config == B_TRUE)
713 					break;
714 			}
715 		}
716 		if (bad_config == B_TRUE) {
717 			/* use default config */
718 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
719 			    " rxdma-cfg property:"
720 			    " bad custom config:"
721 			    " use default"));
722 			for (port = 0; port < num_ports; port++) {
723 				custom_num_rdc[port] =
724 				    (num_ports == 4) ?
725 				    p4_rx_fair[port] :
726 				    p2_rx_fair[port];
727 				custom_start_rdc[port] = start_rdc;
728 				start_rdc += custom_num_rdc[port];
729 			}
730 		}
731 		break;
732 
733 	default:
734 		/* use default config */
735 		cfg_prop = "fair";
736 		for (port = 0; port < num_ports; port++) {
737 			custom_num_rdc[port] = (num_ports == 4) ?
738 			    p4_rx_fair[port] : p2_rx_fair[port];
739 			custom_start_rdc[port] = start_rdc;
740 			start_rdc += custom_num_rdc[port];
741 		}
742 		break;
743 	}
744 
745 	/* Now Update the rx properties */
746 	for (port = 0; port < num_ports; port++) {
747 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
748 		    " update property rxdma-cfg with %s ", cfg_prop));
749 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
750 		    "rxdma-cfg", cfg_prop);
751 		if (ddi_status != DDI_PROP_SUCCESS) {
752 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
753 			    " property rxdma-cfg is not updating to %s",
754 			    cfg_prop));
755 			status |= NXGE_DDI_FAILED;
756 		}
757 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
758 		    num_rdc_prop, custom_num_rdc[port]));
759 
760 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
761 		    num_rdc_prop, custom_num_rdc[port]);
762 
763 		if (ddi_status != DDI_PROP_SUCCESS) {
764 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
765 			    " property %s not updating with %d",
766 			    num_rdc_prop, custom_num_rdc[port]));
767 			status |= NXGE_DDI_FAILED;
768 		}
769 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
770 		    start_rdc_prop, custom_start_rdc[port]));
771 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
772 		    start_rdc_prop, custom_start_rdc[port]);
773 
774 		if (ddi_status != DDI_PROP_SUCCESS) {
775 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
776 			    " property %s not updating with %d ",
777 			    start_rdc_prop, custom_start_rdc[port]));
778 			status |= NXGE_DDI_FAILED;
779 		}
780 	}
781 	if (status & NXGE_DDI_FAILED)
782 		status |= NXGE_ERROR;
783 	return (status);
784 }
785 
786 static nxge_status_t
787 nxge_update_txdma_properties(p_nxge_t nxgep, config_token_t token,
788 	dev_info_t *s_dip[])
789 {
790 	nxge_status_t status = NXGE_OK;
791 	int ddi_status = DDI_SUCCESS;
792 	int num_ports = nxgep->nports;
793 	int port, bits, j;
794 	uint8_t  start_tdc, num_tdc = 0;
795 	p_nxge_param_t param_arr;
796 	uint32_t tdc_bitmap[MAX_SIBLINGS];
797 	int custom_start_tdc[MAX_SIBLINGS];
798 	int custom_num_tdc[MAX_SIBLINGS];
799 	uint8_t bad_config = B_FALSE;
800 	int *prop_val;
801 	uint_t prop_len;
802 	char *start_tdc_prop, *num_tdc_prop, *cfg_prop;
803 
804 	start_tdc = 0;
805 	param_arr = nxgep->param_arr;
806 	start_tdc_prop = param_arr[param_txdma_channels_begin].fcode_name;
807 	num_tdc_prop = param_arr[param_txdma_channels].fcode_name;
808 
809 	switch (token) {
810 	case FAIR:
811 		cfg_prop = "fair";
812 		for (port = 0; port < num_ports; port++) {
813 			custom_num_tdc[port] = (num_ports == 4) ?
814 			    p4_tx_fair[port] : p2_tx_fair[port];
815 			custom_start_tdc[port] = start_tdc;
816 			start_tdc += custom_num_tdc[port];
817 		}
818 		break;
819 
820 	case EQUAL:
821 		cfg_prop = "equal";
822 		for (port = 0; port < num_ports; port++) {
823 			custom_num_tdc[port] = (num_ports == 4) ?
824 			    p4_tx_equal[port] : p2_tx_equal[port];
825 			custom_start_tdc[port] = start_tdc;
826 			start_tdc += custom_num_tdc[port];
827 		}
828 		break;
829 
830 	case CUSTOM:
831 		cfg_prop = "custom";
832 		/* See if it is good config */
833 		num_tdc = 0;
834 		for (port = 0; port < num_ports; port++) {
835 			ddi_status = ddi_prop_lookup_int_array(
836 			    DDI_DEV_T_ANY, s_dip[port], 0, start_tdc_prop,
837 			    &prop_val, &prop_len);
838 			if (ddi_status == DDI_SUCCESS)
839 				custom_start_tdc[port] = *prop_val;
840 			else {
841 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
842 				    " %s custom start port %d"
843 				    " read failed ", " txdma-cfg", port));
844 				bad_config = B_TRUE;
845 				status |= NXGE_DDI_FAILED;
846 			}
847 
848 			if ((custom_start_tdc[port] == -1) ||
849 			    (custom_start_tdc[port] >=
850 			    NXGE_MAX_RDCS)) {
851 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
852 				    " %s custom start %d"
853 				    " out of range %x ", " txdma-cfg",
854 				    port, custom_start_tdc[port]));
855 				bad_config = B_TRUE;
856 				break;
857 			}
858 
859 			ddi_status = ddi_prop_lookup_int_array(
860 			    DDI_DEV_T_ANY, s_dip[port], 0, num_tdc_prop,
861 			    &prop_val, &prop_len);
862 			if (ddi_status == DDI_SUCCESS)
863 				custom_num_tdc[port] = *prop_val;
864 			else {
865 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
866 				    " %s custom num port %d"
867 				    " read failed ", " txdma-cfg", port));
868 				bad_config = B_TRUE;
869 				status |= NXGE_DDI_FAILED;
870 			}
871 
872 			if ((custom_num_tdc[port] == -1) ||
873 			    (custom_num_tdc[port] >
874 			    NXGE_MAX_TDCS) ||
875 			    ((custom_num_tdc[port] +
876 			    custom_start_tdc[port]) >
877 			    NXGE_MAX_TDCS)) {
878 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
879 				    " %s custom num %d"
880 				    " out of range %x ", " rxdma-cfg",
881 				    port, custom_num_tdc[port]));
882 				bad_config = B_TRUE;
883 				break;
884 			}
885 			num_tdc += custom_num_tdc[port];
886 			if (num_tdc > NXGE_MAX_TDCS) {
887 				bad_config = B_TRUE;
888 				break;
889 			}
890 			tdc_bitmap[port] = 0;
891 			for (bits = 0;
892 			    bits < custom_num_tdc[port]; bits++) {
893 				tdc_bitmap[port] |=
894 				    (1 <<
895 				    (bits + custom_start_tdc[port]));
896 			}
897 
898 		}
899 
900 		if (bad_config == B_FALSE) {
901 			/* check for overlap */
902 			for (port = 0; port < num_ports - 1; port++) {
903 				for (j = port + 1; j < num_ports; j++) {
904 					if (tdc_bitmap[port] &
905 					    tdc_bitmap[j]) {
906 						NXGE_DEBUG_MSG((nxgep, CFG_CTL,
907 						    " rxdma-cfg"
908 						    " property custom"
909 						    " bit overlap"
910 						    " %d %d ",
911 						    port, j));
912 						bad_config = B_TRUE;
913 						break;
914 					}
915 				}
916 				if (bad_config == B_TRUE)
917 					break;
918 			}
919 		}
920 		if (bad_config == B_TRUE) {
921 			/* use default config */
922 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
923 			    " txdma-cfg property:"
924 			    " bad custom config:" " use default"));
925 
926 			for (port = 0; port < num_ports; port++) {
927 				custom_num_tdc[port] = (num_ports == 4) ?
928 				    p4_tx_fair[port] : p2_tx_fair[port];
929 				custom_start_tdc[port] = start_tdc;
930 				start_tdc += custom_num_tdc[port];
931 			}
932 		}
933 		break;
934 
935 	default:
936 		/* use default config */
937 		cfg_prop = "fair";
938 		for (port = 0; port < num_ports; port++) {
939 			custom_num_tdc[port] = (num_ports == 4) ?
940 			    p4_tx_fair[port] : p2_tx_fair[port];
941 			custom_start_tdc[port] = start_tdc;
942 			start_tdc += custom_num_tdc[port];
943 		}
944 		break;
945 	}
946 
947 	/* Now Update the tx properties */
948 	for (port = 0; port < num_ports; port++) {
949 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
950 		    " update property txdma-cfg with %s ", cfg_prop));
951 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
952 		    "txdma-cfg", cfg_prop);
953 		if (ddi_status != DDI_PROP_SUCCESS) {
954 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
955 			    " property txdma-cfg is not updating to %s",
956 			    cfg_prop));
957 			status |= NXGE_DDI_FAILED;
958 		}
959 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
960 		    num_tdc_prop, custom_num_tdc[port]));
961 
962 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
963 		    num_tdc_prop, custom_num_tdc[port]);
964 
965 		if (ddi_status != DDI_PROP_SUCCESS) {
966 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
967 			    " property %s not updating with %d",
968 			    num_tdc_prop,
969 			    custom_num_tdc[port]));
970 			status |= NXGE_DDI_FAILED;
971 		}
972 
973 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
974 		    start_tdc_prop, custom_start_tdc[port]));
975 
976 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
977 		    start_tdc_prop, custom_start_tdc[port]);
978 		if (ddi_status != DDI_PROP_SUCCESS) {
979 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
980 			    " property %s not updating with %d ",
981 			    start_tdc_prop, custom_start_tdc[port]));
982 			status |= NXGE_DDI_FAILED;
983 		}
984 	}
985 	if (status & NXGE_DDI_FAILED)
986 		status |= NXGE_ERROR;
987 	return (status);
988 }
989 
990 static nxge_status_t
991 nxge_update_cfg_properties(p_nxge_t nxgep, uint32_t flags,
992 	config_token_t token, dev_info_t *s_dip[])
993 {
994 	nxge_status_t status = NXGE_OK;
995 
996 	switch (flags) {
997 	case COMMON_TXDMA_CFG:
998 		if (nxge_dma_obp_props_only == 0)
999 			status = nxge_update_txdma_properties(nxgep,
1000 			    token, s_dip);
1001 		break;
1002 	case COMMON_RXDMA_CFG:
1003 		if (nxge_dma_obp_props_only == 0)
1004 			status = nxge_update_rxdma_properties(nxgep,
1005 			    token, s_dip);
1006 
1007 		break;
1008 	case COMMON_RXDMA_GRP_CFG:
1009 		status = nxge_update_rxdma_grp_properties(nxgep,
1010 		    token, s_dip);
1011 		break;
1012 	default:
1013 		return (NXGE_ERROR);
1014 	}
1015 	return (status);
1016 }
1017 
1018 /*
1019  * verify consistence.
1020  * (May require publishing the properties on all the ports.
1021  *
1022  * What if properties are published on function 0 device only?
1023  *
1024  *
1025  * rxdma-cfg, txdma-cfg, rxdma-grp-cfg (required )
1026  * What about class configs?
1027  *
1028  * If consistent, update the property on all the siblings.
1029  * set  a flag on hardware shared register
1030  * The rest of the siblings will check the flag
1031  * if the flag is set, they will use the updated property
1032  * without doing any validation.
1033  */
1034 
1035 nxge_status_t
1036 nxge_cfg_verify_set_classify_prop(p_nxge_t nxgep, char *prop,
1037 	uint64_t known_cfg, uint32_t override, dev_info_t *c_dip[])
1038 {
1039 	nxge_status_t status = NXGE_OK;
1040 	int ddi_status = DDI_SUCCESS;
1041 	int i = 0, found = 0, update_prop = B_TRUE;
1042 	int *cfg_val;
1043 	uint_t new_value, cfg_value[MAX_SIBLINGS];
1044 	uint_t prop_len;
1045 	uint_t known_cfg_value;
1046 
1047 	known_cfg_value = (uint_t)known_cfg;
1048 
1049 	if (override == B_TRUE) {
1050 		new_value = known_cfg_value;
1051 		for (i = 0; i < nxgep->nports; i++) {
1052 			ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE,
1053 			    c_dip[i], prop, new_value);
1054 #ifdef NXGE_DEBUG_ERROR
1055 			if (ddi_status != DDI_PROP_SUCCESS)
1056 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1057 				    " property %s failed update ", prop));
1058 #endif
1059 		}
1060 		if (ddi_status != DDI_PROP_SUCCESS)
1061 			return (NXGE_ERROR | NXGE_DDI_FAILED);
1062 	}
1063 	for (i = 0; i < nxgep->nports; i++) {
1064 		cfg_value[i] = known_cfg_value;
1065 		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, c_dip[i], 0,
1066 		    prop, &cfg_val,
1067 		    &prop_len) == DDI_PROP_SUCCESS) {
1068 			cfg_value[i] = *cfg_val;
1069 			ddi_prop_free(cfg_val);
1070 			found++;
1071 		}
1072 	}
1073 
1074 	if (found != i) {
1075 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1076 		    " property %s not specified on all ports", prop));
1077 		if (found == 0) {
1078 			/* not specified: Use default */
1079 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1080 			    " property %s not specified on any port:"
1081 			    " Using default", prop));
1082 			new_value = known_cfg_value;
1083 		} else {
1084 			/* specified on some */
1085 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1086 			    " property %s not specified"
1087 			    " on some ports: Using default", prop));
1088 			/* ? use p0 value instead ? */
1089 			new_value = known_cfg_value;
1090 		}
1091 	} else {
1092 		/* check type and consistence */
1093 		/* found on all devices */
1094 		for (i = 1; i < found; i++) {
1095 			if (cfg_value[i] != cfg_value[i - 1]) {
1096 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1097 				    " property %s inconsistent:"
1098 				    " Using default", prop));
1099 				new_value = known_cfg_value;
1100 				break;
1101 			}
1102 			/*
1103 			 * Found on all the ports and consistent. Nothing to
1104 			 * do.
1105 			 */
1106 			update_prop = B_FALSE;
1107 		}
1108 	}
1109 
1110 	if (update_prop == B_TRUE) {
1111 		for (i = 0; i < nxgep->nports; i++) {
1112 			ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE,
1113 			    c_dip[i], prop, new_value);
1114 #ifdef NXGE_DEBUG_ERROR
1115 			if (ddi_status != DDI_SUCCESS)
1116 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1117 				    " property %s not updating with %d"
1118 				    " Using default",
1119 				    prop, new_value));
1120 #endif
1121 			if (ddi_status != DDI_PROP_SUCCESS)
1122 				status |= NXGE_DDI_FAILED;
1123 		}
1124 	}
1125 	if (status & NXGE_DDI_FAILED)
1126 		status |= NXGE_ERROR;
1127 
1128 	return (status);
1129 }
1130 
1131 static uint64_t
1132 nxge_class_get_known_cfg(p_nxge_t nxgep, int class_prop, int rx_quick_cfg)
1133 {
1134 	int start_prop;
1135 	uint64_t cfg_value;
1136 	p_nxge_param_t param_arr;
1137 
1138 	param_arr = nxgep->param_arr;
1139 	cfg_value = param_arr[class_prop].value;
1140 	start_prop = param_h1_init_value;
1141 
1142 	/* update the properties per quick config */
1143 	switch (rx_quick_cfg) {
1144 	case CFG_L3_WEB:
1145 	case CFG_L3_DISTRIBUTE:
1146 		cfg_value = nxge_classify_get_cfg_value(nxgep,
1147 		    rx_quick_cfg, class_prop - start_prop);
1148 		break;
1149 	default:
1150 		cfg_value = param_arr[class_prop].value;
1151 		break;
1152 	}
1153 	return (cfg_value);
1154 }
1155 
1156 static nxge_status_t
1157 nxge_cfg_verify_set_classify(p_nxge_t nxgep, dev_info_t *c_dip[])
1158 {
1159 	nxge_status_t status = NXGE_OK;
1160 	int rx_quick_cfg, class_prop, start_prop, end_prop;
1161 	char *prop_name;
1162 	int override = B_TRUE;
1163 	uint64_t cfg_value;
1164 	p_nxge_param_t param_arr;
1165 
1166 	param_arr = nxgep->param_arr;
1167 	rx_quick_cfg = param_arr[param_rx_quick_cfg].value;
1168 	start_prop = param_h1_init_value;
1169 	end_prop = param_class_opt_ipv6_sctp;
1170 
1171 	/* update the properties per quick config */
1172 	if (rx_quick_cfg == CFG_NOT_SPECIFIED)
1173 		override = B_FALSE;
1174 
1175 	/*
1176 	 * these parameter affect the classification outcome.
1177 	 * these parameters are used to configure the Flow key and
1178 	 * the TCAM key for each of the IP classes.
1179 	 * Included here are also the H1 and H2 initial values
1180 	 * which affect the distribution as well as final hash value
1181 	 * (hence the offset into RDC table and FCRAM bucket location)
1182 	 *
1183 	 */
1184 	for (class_prop = start_prop; class_prop <= end_prop; class_prop++) {
1185 		prop_name = param_arr[class_prop].fcode_name;
1186 		cfg_value = nxge_class_get_known_cfg(nxgep,
1187 		    class_prop, rx_quick_cfg);
1188 		status = nxge_cfg_verify_set_classify_prop(nxgep, prop_name,
1189 		    cfg_value, override, c_dip);
1190 	}
1191 
1192 	/*
1193 	 * these properties do not affect the actual classification outcome.
1194 	 * used to enable/disable or tune the fflp hardware
1195 	 *
1196 	 * fcram_access_ratio, tcam_access_ratio, tcam_enable, llc_snap_enable
1197 	 *
1198 	 */
1199 	override = B_FALSE;
1200 	for (class_prop = param_fcram_access_ratio;
1201 	    class_prop <= param_llc_snap_enable; class_prop++) {
1202 		prop_name = param_arr[class_prop].fcode_name;
1203 		cfg_value = param_arr[class_prop].value;
1204 		status = nxge_cfg_verify_set_classify_prop(nxgep, prop_name,
1205 		    cfg_value, override, c_dip);
1206 	}
1207 
1208 	return (status);
1209 }
1210 
1211 nxge_status_t
1212 nxge_cfg_verify_set(p_nxge_t nxgep, uint32_t flag)
1213 {
1214 	nxge_status_t status = NXGE_OK;
1215 	int i = 0, found = 0;
1216 	int num_siblings;
1217 	dev_info_t *c_dip[MAX_SIBLINGS + 1];
1218 	char *prop_val[MAX_SIBLINGS];
1219 	config_token_t c_token[MAX_SIBLINGS];
1220 	char *prop;
1221 
1222 	if (nxge_dma_obp_props_only)
1223 		return (NXGE_OK);
1224 
1225 	num_siblings = 0;
1226 	c_dip[num_siblings] = ddi_get_child(nxgep->p_dip);
1227 	while (c_dip[num_siblings]) {
1228 		c_dip[num_siblings + 1] =
1229 		    ddi_get_next_sibling(c_dip[num_siblings]);
1230 		num_siblings++;
1231 	}
1232 
1233 	switch (flag) {
1234 	case COMMON_TXDMA_CFG:
1235 		prop = "txdma-cfg";
1236 		break;
1237 	case COMMON_RXDMA_CFG:
1238 		prop = "rxdma-cfg";
1239 		break;
1240 	case COMMON_RXDMA_GRP_CFG:
1241 		prop = "rxdma-grp-cfg";
1242 		break;
1243 	case COMMON_CLASS_CFG:
1244 		status = nxge_cfg_verify_set_classify(nxgep, c_dip);
1245 		return (status);
1246 	default:
1247 		return (NXGE_ERROR);
1248 	}
1249 
1250 	i = 0;
1251 	while (i < num_siblings) {
1252 		if (ddi_prop_lookup_string(DDI_DEV_T_ANY, c_dip[i], 0, prop,
1253 		    (char **)&prop_val[i]) == DDI_PROP_SUCCESS) {
1254 			c_token[i] = nxge_get_config_token(prop_val[i]);
1255 			ddi_prop_free(prop_val[i]);
1256 			found++;
1257 		} else
1258 			c_token[i] = CONFIG_TOKEN_NONE;
1259 		i++;
1260 	}
1261 
1262 	if (found != i) {
1263 		if (found == 0) {
1264 			/* not specified: Use default */
1265 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1266 			    " property %s not specified on any port:"
1267 			    " Using default", prop));
1268 
1269 			status = nxge_update_cfg_properties(nxgep,
1270 			    flag, FAIR, c_dip);
1271 			return (status);
1272 		} else {
1273 			/*
1274 			 * if  the convention is to use function 0 device then
1275 			 * populate the other devices with this configuration.
1276 			 *
1277 			 * The other alternative is to use the default config.
1278 			 */
1279 			/* not specified: Use default */
1280 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1281 			    " property %s not specified on some ports:"
1282 			    " Using default", prop));
1283 			status = nxge_update_cfg_properties(nxgep,
1284 			    flag, FAIR, c_dip);
1285 			return (status);
1286 		}
1287 	}
1288 
1289 	/* check type and consistence */
1290 	/* found on all devices */
1291 	for (i = 1; i < found; i++) {
1292 		if (c_token[i] != c_token[i - 1]) {
1293 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1294 			    " property %s inconsistent:"
1295 			    " Using default", prop));
1296 			status = nxge_update_cfg_properties(nxgep,
1297 			    flag, FAIR, c_dip);
1298 			return (status);
1299 		}
1300 	}
1301 
1302 	/*
1303 	 * Found on all the ports check if it is custom configuration. if
1304 	 * custom, then verify consistence
1305 	 *
1306 	 * finally create soft properties
1307 	 */
1308 	status = nxge_update_cfg_properties(nxgep, flag, c_token[0], c_dip);
1309 	return (status);
1310 }
1311 
1312 nxge_status_t
1313 nxge_cfg_verify_set_quick_config(p_nxge_t nxgep)
1314 {
1315 	nxge_status_t status = NXGE_OK;
1316 	int ddi_status = DDI_SUCCESS;
1317 	char *prop_val;
1318 	char *rx_prop;
1319 	char *prop;
1320 	uint32_t cfg_value = CFG_NOT_SPECIFIED;
1321 	p_nxge_param_t param_arr;
1322 
1323 	param_arr = nxgep->param_arr;
1324 	rx_prop = param_arr[param_rx_quick_cfg].fcode_name;
1325 
1326 	prop = "rx-quick-cfg";
1327 
1328 	/*
1329 	 * good value are
1330 	 *
1331 	 * "web-server" "generic-server" "l3-classify" "flow-classify"
1332 	 */
1333 	if (ddi_prop_lookup_string(DDI_DEV_T_ANY, nxgep->dip, 0,
1334 	    prop, (char **)&prop_val) != DDI_PROP_SUCCESS) {
1335 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1336 		    " property %s not specified: using default ", prop));
1337 		cfg_value = CFG_NOT_SPECIFIED;
1338 	} else {
1339 		cfg_value = CFG_L3_DISTRIBUTE;
1340 		if (strncmp("web-server", (caddr_t)prop_val, 8) == 0) {
1341 			cfg_value = CFG_L3_WEB;
1342 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1343 			    " %s: web server ", prop));
1344 		}
1345 		if (strncmp("generic-server", (caddr_t)prop_val, 8) == 0) {
1346 			cfg_value = CFG_L3_DISTRIBUTE;
1347 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1348 			    " %s: distribute ", prop));
1349 		}
1350 		/* more */
1351 		ddi_prop_free(prop_val);
1352 	}
1353 
1354 	ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
1355 	    rx_prop, cfg_value);
1356 	if (ddi_status != DDI_PROP_SUCCESS)
1357 		status |= NXGE_DDI_FAILED;
1358 
1359 	/* now handle specified cases: */
1360 	if (status & NXGE_DDI_FAILED)
1361 		status |= NXGE_ERROR;
1362 	return (status);
1363 }
1364 
1365 /*
1366  * Device properties adv-autoneg-cap etc are defined by FWARC
1367  * http://sac.sfbay/FWARC/2002/345/20020610_asif.haswarey
1368  */
1369 static void
1370 nxge_use_cfg_link_cfg(p_nxge_t nxgep)
1371 {
1372 	int *prop_val;
1373 	uint_t prop_len;
1374 	dev_info_t *dip;
1375 	int speed;
1376 	int duplex;
1377 	int adv_autoneg_cap;
1378 	int adv_10gfdx_cap;
1379 	int adv_10ghdx_cap;
1380 	int adv_1000fdx_cap;
1381 	int adv_1000hdx_cap;
1382 	int adv_100fdx_cap;
1383 	int adv_100hdx_cap;
1384 	int adv_10fdx_cap;
1385 	int adv_10hdx_cap;
1386 	int status = DDI_SUCCESS;
1387 
1388 	dip = nxgep->dip;
1389 
1390 	/*
1391 	 * first find out the card type and the supported link speeds and
1392 	 * features
1393 	 */
1394 	/* add code for card type */
1395 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-autoneg-cap",
1396 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1397 		ddi_prop_free(prop_val);
1398 		return;
1399 	}
1400 
1401 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10gfdx-cap",
1402 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1403 		ddi_prop_free(prop_val);
1404 		return;
1405 	}
1406 
1407 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-1000hdx-cap",
1408 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1409 		ddi_prop_free(prop_val);
1410 		return;
1411 	}
1412 
1413 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-1000fdx-cap",
1414 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1415 		ddi_prop_free(prop_val);
1416 		return;
1417 	}
1418 
1419 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-100fdx-cap",
1420 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1421 		ddi_prop_free(prop_val);
1422 		return;
1423 	}
1424 
1425 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-100hdx-cap",
1426 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1427 		ddi_prop_free(prop_val);
1428 		return;
1429 	}
1430 
1431 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10fdx-cap",
1432 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1433 		ddi_prop_free(prop_val);
1434 		return;
1435 	}
1436 
1437 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10hdx-cap",
1438 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1439 		ddi_prop_free(prop_val);
1440 		return;
1441 	}
1442 
1443 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0, "speed",
1444 	    (uchar_t **)&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1445 		if (strncmp("10000", (caddr_t)prop_val,
1446 		    (size_t)prop_len) == 0) {
1447 			speed = 10000;
1448 		} else if (strncmp("1000", (caddr_t)prop_val,
1449 		    (size_t)prop_len) == 0) {
1450 			speed = 1000;
1451 		} else if (strncmp("100", (caddr_t)prop_val,
1452 		    (size_t)prop_len) == 0) {
1453 			speed = 100;
1454 		} else if (strncmp("10", (caddr_t)prop_val,
1455 		    (size_t)prop_len) == 0) {
1456 			speed = 10;
1457 		} else if (strncmp("auto", (caddr_t)prop_val,
1458 		    (size_t)prop_len) == 0) {
1459 			speed = 0;
1460 		} else {
1461 			NXGE_ERROR_MSG((nxgep, NXGE_NOTE,
1462 			    "speed property is invalid reverting to auto"));
1463 			speed = 0;
1464 		}
1465 		ddi_prop_free(prop_val);
1466 	} else
1467 		speed = 0;
1468 
1469 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0, "duplex",
1470 	    (uchar_t **)&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1471 		if (strncmp("full", (caddr_t)prop_val,
1472 		    (size_t)prop_len) == 0) {
1473 			duplex = 2;
1474 		} else if (strncmp("half", (caddr_t)prop_val,
1475 		    (size_t)prop_len) == 0) {
1476 			duplex = 1;
1477 		} else if (strncmp("auto", (caddr_t)prop_val,
1478 		    (size_t)prop_len) == 0) {
1479 			duplex = 0;
1480 		} else {
1481 			NXGE_ERROR_MSG((nxgep, NXGE_NOTE,
1482 			    "duplex property is invalid"
1483 			    " reverting to auto"));
1484 			duplex = 0;
1485 		}
1486 		ddi_prop_free(prop_val);
1487 	} else
1488 		duplex = 0;
1489 
1490 	/* speed == 0 or duplex == 0 means auto negotiation. */
1491 	adv_autoneg_cap = (speed == 0) || (duplex == 0);
1492 	if (adv_autoneg_cap == 0) {
1493 		adv_10gfdx_cap = ((speed == 10000) && (duplex == 2));
1494 		adv_10ghdx_cap = adv_10gfdx_cap;
1495 		adv_10ghdx_cap |= ((speed == 10000) && (duplex == 1));
1496 		adv_1000fdx_cap = adv_10ghdx_cap;
1497 		adv_1000fdx_cap |= ((speed == 1000) && (duplex == 2));
1498 		adv_1000hdx_cap = adv_1000fdx_cap;
1499 		adv_1000hdx_cap |= ((speed == 1000) && (duplex == 1));
1500 		adv_100fdx_cap = adv_1000hdx_cap;
1501 		adv_100fdx_cap |= ((speed == 100) && (duplex == 2));
1502 		adv_100hdx_cap = adv_100fdx_cap;
1503 		adv_100hdx_cap |= ((speed == 100) && (duplex == 1));
1504 		adv_10fdx_cap = adv_100hdx_cap;
1505 		adv_10fdx_cap |= ((speed == 10) && (duplex == 2));
1506 		adv_10hdx_cap = adv_10fdx_cap;
1507 		adv_10hdx_cap |= ((speed == 10) && (duplex == 1));
1508 	} else if (speed == 0) {
1509 		adv_10gfdx_cap = (duplex == 2);
1510 		adv_10ghdx_cap = (duplex == 1);
1511 		adv_1000fdx_cap = (duplex == 2);
1512 		adv_1000hdx_cap = (duplex == 1);
1513 		adv_100fdx_cap = (duplex == 2);
1514 		adv_100hdx_cap = (duplex == 1);
1515 		adv_10fdx_cap = (duplex == 2);
1516 		adv_10hdx_cap = (duplex == 1);
1517 	}
1518 	if (duplex == 0) {
1519 		adv_10gfdx_cap = (speed == 0);
1520 		adv_10gfdx_cap |= (speed == 10000);
1521 		adv_10ghdx_cap = adv_10gfdx_cap;
1522 		adv_10ghdx_cap |= (speed == 10000);
1523 		adv_1000fdx_cap = adv_10ghdx_cap;
1524 		adv_1000fdx_cap |= (speed == 1000);
1525 		adv_1000hdx_cap = adv_1000fdx_cap;
1526 		adv_1000hdx_cap |= (speed == 1000);
1527 		adv_100fdx_cap = adv_1000hdx_cap;
1528 		adv_100fdx_cap |= (speed == 100);
1529 		adv_100hdx_cap = adv_100fdx_cap;
1530 		adv_100hdx_cap |= (speed == 100);
1531 		adv_10fdx_cap = adv_100hdx_cap;
1532 		adv_10fdx_cap |= (speed == 10);
1533 		adv_10hdx_cap = adv_10fdx_cap;
1534 		adv_10hdx_cap |= (speed == 10);
1535 	}
1536 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1537 	    "adv-autoneg-cap", &adv_autoneg_cap, 1);
1538 	if (status)
1539 		return;
1540 
1541 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1542 	    "adv-10gfdx-cap", &adv_10gfdx_cap, 1);
1543 	if (status)
1544 		goto nxge_map_myargs_to_gmii_fail1;
1545 
1546 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1547 	    "adv-10ghdx-cap", &adv_10ghdx_cap, 1);
1548 	if (status)
1549 		goto nxge_map_myargs_to_gmii_fail2;
1550 
1551 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1552 	    "adv-1000fdx-cap", &adv_1000fdx_cap, 1);
1553 	if (status)
1554 		goto nxge_map_myargs_to_gmii_fail3;
1555 
1556 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1557 	    "adv-1000hdx-cap", &adv_1000hdx_cap, 1);
1558 	if (status)
1559 		goto nxge_map_myargs_to_gmii_fail4;
1560 
1561 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1562 	    "adv-100fdx-cap", &adv_100fdx_cap, 1);
1563 	if (status)
1564 		goto nxge_map_myargs_to_gmii_fail5;
1565 
1566 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1567 	    "adv-100hdx-cap", &adv_100hdx_cap, 1);
1568 	if (status)
1569 		goto nxge_map_myargs_to_gmii_fail6;
1570 
1571 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1572 	    "adv-10fdx-cap", &adv_10fdx_cap, 1);
1573 	if (status)
1574 		goto nxge_map_myargs_to_gmii_fail7;
1575 
1576 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1577 	    "adv-10hdx-cap", &adv_10hdx_cap, 1);
1578 	if (status)
1579 		goto nxge_map_myargs_to_gmii_fail8;
1580 
1581 	return;
1582 
1583 nxge_map_myargs_to_gmii_fail9:
1584 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10hdx-cap");
1585 
1586 nxge_map_myargs_to_gmii_fail8:
1587 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10fdx-cap");
1588 
1589 nxge_map_myargs_to_gmii_fail7:
1590 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-100hdx-cap");
1591 
1592 nxge_map_myargs_to_gmii_fail6:
1593 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-100fdx-cap");
1594 
1595 nxge_map_myargs_to_gmii_fail5:
1596 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-1000hdx-cap");
1597 
1598 nxge_map_myargs_to_gmii_fail4:
1599 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-1000fdx-cap");
1600 
1601 nxge_map_myargs_to_gmii_fail3:
1602 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10ghdx-cap");
1603 
1604 nxge_map_myargs_to_gmii_fail2:
1605 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10gfdx-cap");
1606 
1607 nxge_map_myargs_to_gmii_fail1:
1608 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-autoneg-cap");
1609 }
1610 
1611 nxge_status_t
1612 nxge_get_config_properties(p_nxge_t nxgep)
1613 {
1614 	nxge_status_t status = NXGE_OK;
1615 	p_nxge_hw_list_t hw_p;
1616 
1617 	NXGE_DEBUG_MSG((nxgep, VPD_CTL, " ==> nxge_get_config_properties"));
1618 
1619 	if ((hw_p = nxgep->nxge_hw_p) == NULL) {
1620 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1621 		    " nxge_get_config_properties:"
1622 		    " common hardware not set", nxgep->niu_type));
1623 		return (NXGE_ERROR);
1624 	}
1625 
1626 	/*
1627 	 * Get info on how many ports Neptune card has.
1628 	 */
1629 	nxgep->nports = nxge_get_nports(nxgep);
1630 	if (nxgep->nports <= 0) {
1631 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1632 		    "<==nxge_get_config_properties: Invalid Neptune type 0x%x",
1633 		    nxgep->niu_type));
1634 		return (NXGE_ERROR);
1635 	}
1636 	nxgep->classifier.tcam_size = TCAM_NIU_TCAM_MAX_ENTRY;
1637 	if (NXGE_IS_VALID_NEPTUNE_TYPE(nxgep)) {
1638 		nxgep->classifier.tcam_size = TCAM_NXGE_TCAM_MAX_ENTRY;
1639 	}
1640 	if (nxgep->function_num >= nxgep->nports) {
1641 		return (NXGE_ERROR);
1642 	}
1643 
1644 	status = nxge_get_mac_addr_properties(nxgep);
1645 	if (status != NXGE_OK)
1646 		return (NXGE_ERROR);
1647 
1648 	/*
1649 	 * read the configuration type. If none is specified, used default.
1650 	 * Config types: equal: (default) DMA channels, RDC groups, TCAM, FCRAM
1651 	 * are shared equally across all the ports.
1652 	 *
1653 	 * Fair: DMA channels, RDC groups, TCAM, FCRAM are shared proportional
1654 	 * to the port speed.
1655 	 *
1656 	 *
1657 	 * custom: DMA channels, RDC groups, TCAM, FCRAM partition is
1658 	 * specified in nxge.conf. Need to read each parameter and set
1659 	 * up the parameters in nxge structures.
1660 	 *
1661 	 */
1662 	switch (nxgep->niu_type) {
1663 	case N2_NIU:
1664 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1665 		    " ==> nxge_get_config_properties: N2"));
1666 		MUTEX_ENTER(&hw_p->nxge_cfg_lock);
1667 		if ((hw_p->flags & COMMON_CFG_VALID) !=
1668 		    COMMON_CFG_VALID) {
1669 			status = nxge_cfg_verify_set(nxgep,
1670 			    COMMON_RXDMA_GRP_CFG);
1671 			status = nxge_cfg_verify_set(nxgep,
1672 			    COMMON_CLASS_CFG);
1673 			hw_p->flags |= COMMON_CFG_VALID;
1674 		}
1675 		MUTEX_EXIT(&hw_p->nxge_cfg_lock);
1676 		status = nxge_use_cfg_n2niu_properties(nxgep);
1677 		break;
1678 	default:
1679 		if (!NXGE_IS_VALID_NEPTUNE_TYPE(nxgep)) {
1680 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1681 			    " nxge_get_config_properties:"
1682 			    " unknown NIU type 0x%x", nxgep->niu_type));
1683 			return (NXGE_ERROR);
1684 		}
1685 
1686 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1687 		    " ==> nxge_get_config_properties: Neptune"));
1688 		status = nxge_cfg_verify_set_quick_config(nxgep);
1689 		MUTEX_ENTER(&hw_p->nxge_cfg_lock);
1690 		if ((hw_p->flags & COMMON_CFG_VALID) !=
1691 		    COMMON_CFG_VALID) {
1692 			status = nxge_cfg_verify_set(nxgep,
1693 			    COMMON_TXDMA_CFG);
1694 			status = nxge_cfg_verify_set(nxgep,
1695 			    COMMON_RXDMA_CFG);
1696 			status = nxge_cfg_verify_set(nxgep,
1697 			    COMMON_RXDMA_GRP_CFG);
1698 			status = nxge_cfg_verify_set(nxgep,
1699 			    COMMON_CLASS_CFG);
1700 			hw_p->flags |= COMMON_CFG_VALID;
1701 		}
1702 		MUTEX_EXIT(&hw_p->nxge_cfg_lock);
1703 		nxge_use_cfg_neptune_properties(nxgep);
1704 		status = NXGE_OK;
1705 		break;
1706 	}
1707 
1708 	/*
1709 	 * Get the software LSO enable flag property from the
1710 	 * driver configuration file (nxge.conf).
1711 	 * This flag will be set to disable (0) if this property
1712 	 * does not exist.
1713 	 */
1714 	nxgep->soft_lso_enable = ddi_prop_get_int(DDI_DEV_T_ANY, nxgep->dip,
1715 	    DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "soft-lso-enable", 0);
1716 	NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1717 	    "nxge_get_config_properties: software lso %d\n",
1718 	    nxgep->soft_lso_enable));
1719 
1720 	NXGE_DEBUG_MSG((nxgep, VPD_CTL, " <== nxge_get_config_properties"));
1721 	return (status);
1722 }
1723 
1724 static nxge_status_t
1725 nxge_use_cfg_n2niu_properties(p_nxge_t nxgep)
1726 {
1727 	nxge_status_t status = NXGE_OK;
1728 
1729 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_n2niu_properties"));
1730 
1731 	status = nxge_use_default_dma_config_n2(nxgep);
1732 	if (status != NXGE_OK) {
1733 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1734 		    " ==> nxge_use_cfg_n2niu_properties (err 0x%x)",
1735 		    status));
1736 		return (status | NXGE_ERROR);
1737 	}
1738 
1739 	(void) nxge_use_cfg_vlan_class_config(nxgep);
1740 	(void) nxge_use_cfg_mac_class_config(nxgep);
1741 	(void) nxge_use_cfg_class_config(nxgep);
1742 	(void) nxge_use_cfg_link_cfg(nxgep);
1743 
1744 	/*
1745 	 * Read in the hardware (fcode) properties. Use the ndd array to read
1746 	 * each property.
1747 	 */
1748 	(void) nxge_get_param_soft_properties(nxgep);
1749 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_n2niu_properties"));
1750 
1751 	return (status);
1752 }
1753 
1754 static void
1755 nxge_use_cfg_neptune_properties(p_nxge_t nxgep)
1756 {
1757 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_neptune_properties"));
1758 
1759 	(void) nxge_use_cfg_dma_config(nxgep);
1760 	(void) nxge_use_cfg_vlan_class_config(nxgep);
1761 	(void) nxge_use_cfg_mac_class_config(nxgep);
1762 	(void) nxge_use_cfg_class_config(nxgep);
1763 	(void) nxge_use_cfg_link_cfg(nxgep);
1764 
1765 	/*
1766 	 * Read in the hardware (fcode) properties. Use the ndd array to read
1767 	 * each property.
1768 	 */
1769 	(void) nxge_get_param_soft_properties(nxgep);
1770 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_neptune_properties"));
1771 }
1772 
1773 /*
1774  * FWARC 2006/556 for N2 NIU.  Get the properties
1775  * from the prom.
1776  */
1777 static nxge_status_t
1778 nxge_use_default_dma_config_n2(p_nxge_t nxgep)
1779 {
1780 	int			ndmas;
1781 	uint8_t			func;
1782 	p_nxge_dma_pt_cfg_t	p_dma_cfgp;
1783 	p_nxge_hw_pt_cfg_t	p_cfgp;
1784 	int			*prop_val;
1785 	uint_t			prop_len;
1786 	int			i;
1787 	nxge_status_t		status = NXGE_OK;
1788 
1789 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2"));
1790 
1791 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
1792 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
1793 
1794 	func = nxgep->function_num;
1795 	p_cfgp->function_number = func;
1796 	ndmas = NXGE_TDMA_PER_NIU_PORT;
1797 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1798 	    "tx-dma-channels", (int **)&prop_val,
1799 	    &prop_len) == DDI_PROP_SUCCESS) {
1800 		if (prop_len != NXGE_NIU_TDMA_PROP_LEN) {
1801 			ddi_prop_free(prop_val);
1802 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1803 			    "==> nxge_use_default_dma_config_n2: "
1804 			    "get tx-dma-channels failed"));
1805 			return (NXGE_DDI_FAILED);
1806 		} else {
1807 			p_cfgp->tdc.start = prop_val[0];
1808 			NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1809 			    "==> nxge_use_default_dma_config_n2: tdc starts %d "
1810 			    "(#%d)", p_cfgp->tdc.start, prop_len));
1811 
1812 			ndmas = prop_val[1];
1813 			NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1814 			    "==> nxge_use_default_dma_config_n2: #tdc %d (#%d)",
1815 			    ndmas, prop_len));
1816 			ddi_prop_free(prop_val);
1817 		}
1818 	} else {
1819 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1820 		    "==> nxge_use_default_dma_config_n2: "
1821 		    "get tx-dma-channels failed"));
1822 		return (NXGE_DDI_FAILED);
1823 	}
1824 
1825 	p_cfgp->tdc.count = ndmas;
1826 	p_cfgp->tdc.owned = p_cfgp->tdc.count;
1827 
1828 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
1829 	    "p_cfgp 0x%llx max_tdcs %d start %d",
1830 	    p_cfgp, p_cfgp->tdc.count, p_cfgp->tdc.start));
1831 
1832 	/* Receive DMA */
1833 	ndmas = NXGE_RDMA_PER_NIU_PORT;
1834 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1835 	    "rx-dma-channels", (int **)&prop_val,
1836 	    &prop_len) == DDI_PROP_SUCCESS) {
1837 		if (prop_len != NXGE_NIU_TDMA_PROP_LEN) {
1838 			ddi_prop_free(prop_val);
1839 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1840 			    "==> nxge_use_default_dma_config_n2: "
1841 			    "get rx-dma-channels failed"));
1842 			return (NXGE_DDI_FAILED);
1843 		} else {
1844 			p_cfgp->start_rdc = prop_val[0];
1845 			NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1846 			    "==> nxge_use_default_dma_config_n2(obp):"
1847 			    " rdc start %d (#%d)",
1848 			    p_cfgp->start_rdc, prop_len));
1849 			ndmas = prop_val[1];
1850 			NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1851 			    "==> nxge_use_default_dma_config_n2(obp): "
1852 			    "#rdc %d (#%d)", ndmas, prop_len));
1853 			ddi_prop_free(prop_val);
1854 		}
1855 	} else {
1856 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1857 		    "==> nxge_use_default_dma_config_n2: "
1858 		    "get rx-dma-channel failed"));
1859 		return (NXGE_DDI_FAILED);
1860 	}
1861 
1862 	p_cfgp->max_rdcs = ndmas;
1863 	nxgep->rdc_mask = (ndmas - 1);
1864 
1865 	/* Hypervisor: rdc # and group # use the same # !! */
1866 	p_cfgp->max_grpids = p_cfgp->max_rdcs + p_cfgp->tdc.owned;
1867 	p_cfgp->mif_ldvid = p_cfgp->mac_ldvid = p_cfgp->ser_ldvid = 0;
1868 
1869 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1870 	    "interrupts", (int **)&prop_val,
1871 	    &prop_len) == DDI_PROP_SUCCESS) {
1872 		if ((prop_len != NXGE_NIU_0_INTR_PROP_LEN) &&
1873 		    (prop_len != NXGE_NIU_1_INTR_PROP_LEN)) {
1874 			ddi_prop_free(prop_val);
1875 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1876 			    "==> nxge_use_default_dma_config_n2: "
1877 			    "get interrupts failed"));
1878 			return (NXGE_DDI_FAILED);
1879 		}
1880 
1881 		/*
1882 		 * For each device assigned, the content of each interrupts
1883 		 * property is its logical device group.
1884 		 *
1885 		 * Assignment of interrupts property is in the the following
1886 		 * order:
1887 		 *
1888 		 * MAC MIF (if configured) SYSTEM ERROR (if configured) first
1889 		 * receive channel next channel...... last receive channel
1890 		 * first transmit channel next channel...... last transmit
1891 		 * channel
1892 		 *
1893 		 * prop_len should be at least for one mac and total # of rx and
1894 		 * tx channels. Function 0 owns MIF and ERROR
1895 		 */
1896 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1897 		    "==> nxge_use_default_dma_config_n2(obp): "
1898 		    "# interrupts %d", prop_len));
1899 
1900 		switch (func) {
1901 		case 0:
1902 			p_cfgp->ldg_chn_start = 3;
1903 			p_cfgp->mac_ldvid = NXGE_MAC_LD_PORT0;
1904 			p_cfgp->mif_ldvid = NXGE_MIF_LD;
1905 			p_cfgp->ser_ldvid = NXGE_SYS_ERROR_LD;
1906 
1907 			break;
1908 		case 1:
1909 			p_cfgp->ldg_chn_start = 1;
1910 			p_cfgp->mac_ldvid = NXGE_MAC_LD_PORT1;
1911 
1912 			break;
1913 		default:
1914 			status = NXGE_DDI_FAILED;
1915 			break;
1916 		}
1917 
1918 		if (status != NXGE_OK)
1919 			return (status);
1920 
1921 		for (i = 0; i < prop_len; i++) {
1922 			p_cfgp->ldg[i] = prop_val[i];
1923 			NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1924 			    "==> nxge_use_default_dma_config_n2(obp): "
1925 			    "F%d: interrupt #%d, ldg %d",
1926 			    nxgep->function_num, i, p_cfgp->ldg[i]));
1927 		}
1928 
1929 		p_cfgp->max_grpids = prop_len;
1930 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1931 		    "==> nxge_use_default_dma_config_n2(obp): %d "
1932 		    "(#%d) maxgrpids %d channel starts %d",
1933 		    p_cfgp->mac_ldvid, i, p_cfgp->max_grpids,
1934 		    p_cfgp->ldg_chn_start));
1935 		ddi_prop_free(prop_val);
1936 	} else {
1937 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1938 		    "==> nxge_use_default_dma_config_n2: "
1939 		    "get interrupts failed"));
1940 		return (NXGE_DDI_FAILED);
1941 	}
1942 
1943 	p_cfgp->max_ldgs = p_cfgp->max_grpids;
1944 	NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1945 	    "==> nxge_use_default_dma_config_n2: p_cfgp 0x%llx max_rdcs %d "
1946 	    "max_grpids %d macid %d mifid %d serrid %d",
1947 	    p_cfgp, p_cfgp->max_rdcs, p_cfgp->max_grpids,
1948 	    p_cfgp->mac_ldvid, p_cfgp->mif_ldvid, p_cfgp->ser_ldvid));
1949 
1950 
1951 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
1952 	    "p_cfgp p%p start_ldg %d nxgep->max_ldgs %d",
1953 	    p_cfgp, p_cfgp->start_ldg, p_cfgp->max_ldgs));
1954 
1955 	/*
1956 	 * RDC groups and the beginning RDC group assigned to this function.
1957 	 */
1958 	p_cfgp->max_rdc_grpids = NXGE_MAX_RDC_GROUPS / nxgep->nports;
1959 	p_cfgp->def_mac_rxdma_grpid =
1960 	    nxgep->function_num * NXGE_MAX_RDC_GROUPS / nxgep->nports;
1961 	p_cfgp->def_mac_txdma_grpid =
1962 	    nxgep->function_num * NXGE_MAX_TDC_GROUPS / nxgep->nports;
1963 
1964 	if ((p_cfgp->def_mac_rxdma_grpid = nxge_fzc_rdc_tbl_bind(nxgep,
1965 	    p_cfgp->def_mac_rxdma_grpid, B_TRUE)) >= NXGE_MAX_RDC_GRPS) {
1966 		NXGE_ERROR_MSG((nxgep, CFG_CTL,
1967 		    "nxge_use_default_dma_config_n2(): "
1968 		    "nxge_fzc_rdc_tbl_bind failed"));
1969 		return (NXGE_DDI_FAILED);
1970 	}
1971 
1972 	status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
1973 	    "rx-rdc-grps", p_cfgp->max_rdc_grpids);
1974 	if (status) {
1975 		return (NXGE_DDI_FAILED);
1976 	}
1977 	status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
1978 	    "rx-rdc-grps-begin", p_cfgp->def_mac_rxdma_grpid);
1979 	if (status) {
1980 		(void) ddi_prop_remove(DDI_DEV_T_NONE, nxgep->dip,
1981 		    "rx-rdc-grps");
1982 		return (NXGE_DDI_FAILED);
1983 	}
1984 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
1985 	    "p_cfgp $%p # rdc groups %d start rdc group id %d",
1986 	    p_cfgp, p_cfgp->max_rdc_grpids,
1987 	    p_cfgp->def_mac_rxdma_grpid));
1988 
1989 	nxgep->intr_timeout = NXGE_RDC_RCR_TIMEOUT;
1990 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1991 	    "rxdma-intr-time", (int **)&prop_val, &prop_len) ==
1992 	    DDI_PROP_SUCCESS) {
1993 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
1994 			nxgep->intr_timeout = prop_val[0];
1995 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
1996 			    nxgep->dip, "rxdma-intr-time", prop_val, prop_len);
1997 		}
1998 		ddi_prop_free(prop_val);
1999 	}
2000 
2001 	nxgep->intr_threshold = NXGE_RDC_RCR_THRESHOLD;
2002 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
2003 	    "rxdma-intr-pkts", (int **)&prop_val, &prop_len) ==
2004 	    DDI_PROP_SUCCESS) {
2005 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
2006 			nxgep->intr_threshold = prop_val[0];
2007 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2008 			    nxgep->dip, "rxdma-intr-pkts", prop_val, prop_len);
2009 		}
2010 		ddi_prop_free(prop_val);
2011 	}
2012 
2013 	nxge_set_hw_dma_config(nxgep);
2014 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "<== nxge_use_default_dma_config_n2"));
2015 	return (status);
2016 }
2017 
2018 static void
2019 nxge_use_cfg_dma_config(p_nxge_t nxgep)
2020 {
2021 	int tx_ndmas, rx_ndmas, nrxgp, st_txdma, st_rxdma;
2022 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2023 	p_nxge_hw_pt_cfg_t p_cfgp;
2024 	dev_info_t *dip;
2025 	p_nxge_param_t param_arr;
2026 	char *prop;
2027 	int *prop_val;
2028 	uint_t prop_len;
2029 	int i;
2030 	uint8_t *ch_arr_p;
2031 
2032 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_dma_config"));
2033 	param_arr = nxgep->param_arr;
2034 
2035 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2036 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2037 	dip = nxgep->dip;
2038 	p_cfgp->function_number = nxgep->function_num;
2039 	prop = param_arr[param_txdma_channels_begin].fcode_name;
2040 
2041 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2042 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2043 		p_cfgp->tdc.start = *prop_val;
2044 		ddi_prop_free(prop_val);
2045 	} else {
2046 		switch (nxgep->niu_type) {
2047 		case NEPTUNE_4_1GC:
2048 			ch_arr_p = &tx_4_1G[0];
2049 			break;
2050 		case NEPTUNE_2_10GF:
2051 			ch_arr_p = &tx_2_10G[0];
2052 			break;
2053 		case NEPTUNE_2_10GF_2_1GC:
2054 		case NEPTUNE_2_10GF_2_1GRF:
2055 			ch_arr_p = &tx_2_10G_2_1G[0];
2056 			break;
2057 		case NEPTUNE_1_10GF_3_1GC:
2058 			ch_arr_p = &tx_1_10G_3_1G[0];
2059 			break;
2060 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2061 			ch_arr_p = &tx_1_1G_1_10G_2_1G[0];
2062 			break;
2063 		default:
2064 			switch (nxgep->platform_type) {
2065 			case P_NEPTUNE_ALONSO:
2066 				ch_arr_p = &tx_2_10G_2_1G[0];
2067 				break;
2068 			default:
2069 				ch_arr_p = &p4_tx_equal[0];
2070 				break;
2071 			}
2072 			break;
2073 		}
2074 		st_txdma = 0;
2075 		for (i = 0; i < nxgep->function_num; i++, ch_arr_p++)
2076 			st_txdma += *ch_arr_p;
2077 
2078 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2079 		    prop, st_txdma);
2080 		p_cfgp->tdc.start = st_txdma;
2081 	}
2082 
2083 	prop = param_arr[param_txdma_channels].fcode_name;
2084 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2085 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2086 		tx_ndmas = *prop_val;
2087 		ddi_prop_free(prop_val);
2088 	} else {
2089 		switch (nxgep->niu_type) {
2090 		case NEPTUNE_4_1GC:
2091 			tx_ndmas = tx_4_1G[nxgep->function_num];
2092 			break;
2093 		case NEPTUNE_2_10GF:
2094 			tx_ndmas = tx_2_10G[nxgep->function_num];
2095 			break;
2096 		case NEPTUNE_2_10GF_2_1GC:
2097 		case NEPTUNE_2_10GF_2_1GRF:
2098 			tx_ndmas = tx_2_10G_2_1G[nxgep->function_num];
2099 			break;
2100 		case NEPTUNE_1_10GF_3_1GC:
2101 			tx_ndmas = tx_1_10G_3_1G[nxgep->function_num];
2102 			break;
2103 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2104 			tx_ndmas = tx_1_1G_1_10G_2_1G[nxgep->function_num];
2105 			break;
2106 		default:
2107 			switch (nxgep->platform_type) {
2108 			case P_NEPTUNE_ALONSO:
2109 				tx_ndmas = tx_2_10G_2_1G[nxgep->function_num];
2110 				break;
2111 			default:
2112 				tx_ndmas = p4_tx_equal[nxgep->function_num];
2113 				break;
2114 			}
2115 			break;
2116 		}
2117 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2118 		    prop, tx_ndmas);
2119 	}
2120 
2121 	p_cfgp->tdc.count = tx_ndmas;
2122 	p_cfgp->tdc.owned = p_cfgp->tdc.count;
2123 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_dma_config: "
2124 	    "p_cfgp 0x%llx max_tdcs %d", p_cfgp, p_cfgp->tdc.count));
2125 
2126 	prop = param_arr[param_rxdma_channels_begin].fcode_name;
2127 
2128 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2129 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2130 		p_cfgp->start_rdc = *prop_val;
2131 		ddi_prop_free(prop_val);
2132 	} else {
2133 		switch (nxgep->niu_type) {
2134 		case NEPTUNE_4_1GC:
2135 			ch_arr_p = &rx_4_1G[0];
2136 			break;
2137 		case NEPTUNE_2_10GF:
2138 			ch_arr_p = &rx_2_10G[0];
2139 			break;
2140 		case NEPTUNE_2_10GF_2_1GC:
2141 		case NEPTUNE_2_10GF_2_1GRF:
2142 			ch_arr_p = &rx_2_10G_2_1G[0];
2143 			break;
2144 		case NEPTUNE_1_10GF_3_1GC:
2145 			ch_arr_p = &rx_1_10G_3_1G[0];
2146 			break;
2147 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2148 			ch_arr_p = &rx_1_1G_1_10G_2_1G[0];
2149 			break;
2150 		default:
2151 			switch (nxgep->platform_type) {
2152 			case P_NEPTUNE_ALONSO:
2153 				ch_arr_p = &rx_2_10G_2_1G[0];
2154 				break;
2155 			default:
2156 				ch_arr_p = &p4_rx_equal[0];
2157 				break;
2158 			}
2159 			break;
2160 		}
2161 		st_rxdma = 0;
2162 		for (i = 0; i < nxgep->function_num; i++, ch_arr_p++)
2163 			st_rxdma += *ch_arr_p;
2164 
2165 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2166 		    prop, st_rxdma);
2167 		p_cfgp->start_rdc = st_rxdma;
2168 	}
2169 
2170 	prop = param_arr[param_rxdma_channels].fcode_name;
2171 
2172 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2173 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2174 		rx_ndmas = *prop_val;
2175 		ddi_prop_free(prop_val);
2176 	} else {
2177 		switch (nxgep->niu_type) {
2178 		case NEPTUNE_4_1GC:
2179 			rx_ndmas = rx_4_1G[nxgep->function_num];
2180 			break;
2181 		case NEPTUNE_2_10GF:
2182 			rx_ndmas = rx_2_10G[nxgep->function_num];
2183 			break;
2184 		case NEPTUNE_2_10GF_2_1GC:
2185 		case NEPTUNE_2_10GF_2_1GRF:
2186 			rx_ndmas = rx_2_10G_2_1G[nxgep->function_num];
2187 			break;
2188 		case NEPTUNE_1_10GF_3_1GC:
2189 			rx_ndmas = rx_1_10G_3_1G[nxgep->function_num];
2190 			break;
2191 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2192 			rx_ndmas = rx_1_1G_1_10G_2_1G[nxgep->function_num];
2193 			break;
2194 		default:
2195 			switch (nxgep->platform_type) {
2196 			case P_NEPTUNE_ALONSO:
2197 				rx_ndmas = rx_2_10G_2_1G[nxgep->function_num];
2198 				break;
2199 			default:
2200 				rx_ndmas = p4_rx_equal[nxgep->function_num];
2201 				break;
2202 			}
2203 			break;
2204 		}
2205 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2206 		    prop, rx_ndmas);
2207 	}
2208 
2209 	p_cfgp->max_rdcs = rx_ndmas;
2210 
2211 	/*
2212 	 * RDC groups and the beginning RDC group assigned to this function.
2213 	 * XXX: this may be wrong if prop value is used.
2214 	 */
2215 	p_cfgp->def_mac_rxdma_grpid =
2216 	    nxgep->function_num * NXGE_MAX_RDC_GROUPS / nxgep->nports;
2217 	p_cfgp->def_mac_txdma_grpid =
2218 	    nxgep->function_num * NXGE_MAX_TDC_GROUPS / nxgep->nports;
2219 
2220 	if ((p_cfgp->def_mac_rxdma_grpid = nxge_fzc_rdc_tbl_bind(nxgep,
2221 	    p_cfgp->def_mac_rxdma_grpid, B_TRUE)) >= NXGE_MAX_RDC_GRPS) {
2222 		NXGE_ERROR_MSG((nxgep, CFG_CTL,
2223 		    "nxge_use_default_dma_config2(): "
2224 		    "nxge_fzc_rdc_tbl_bind failed"));
2225 		goto nxge_use_cfg_dma_config_exit;
2226 	}
2227 
2228 	prop = param_arr[param_rx_rdc_grps].fcode_name;
2229 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2230 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2231 		nrxgp = *prop_val;
2232 		ddi_prop_free(prop_val);
2233 	} else {
2234 		nrxgp = NXGE_MAX_RDC_GRPS / nxgep->nports;
2235 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2236 		    prop, nrxgp);
2237 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2238 		    "==> nxge_use_default_dma_config: "
2239 		    "num_rdc_grpid not found: use def:# of "
2240 		    "rdc groups %d\n", nrxgp));
2241 	}
2242 	p_cfgp->max_rdc_grpids = nrxgp;
2243 
2244 	/*
2245 	 * 2/4 ports have the same hard-wired logical groups assigned.
2246 	 */
2247 	p_cfgp->start_ldg = nxgep->function_num * NXGE_LDGRP_PER_4PORTS;
2248 	p_cfgp->max_ldgs = NXGE_LDGRP_PER_4PORTS;
2249 
2250 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_default_dma_config: "
2251 	    "p_cfgp 0x%llx max_rdcs %d max_grpids %d default_grpid %d",
2252 	    p_cfgp, p_cfgp->max_rdcs, p_cfgp->max_grpids,
2253 	    p_cfgp->def_mac_rxdma_grpid));
2254 
2255 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_dma_config: "
2256 	    "p_cfgp 0x%016llx start_ldg %d nxgep->max_ldgs %d "
2257 	    "def_mac_rxdma_grpid %d",
2258 	    p_cfgp, p_cfgp->start_ldg, p_cfgp->max_ldgs,
2259 	    p_cfgp->def_mac_rxdma_grpid));
2260 
2261 	nxgep->intr_timeout = NXGE_RDC_RCR_TIMEOUT;
2262 	prop = param_arr[param_rxdma_intr_time].fcode_name;
2263 
2264 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2265 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2266 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
2267 			nxgep->intr_timeout = prop_val[0];
2268 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2269 			    nxgep->dip, prop, prop_val, prop_len);
2270 		}
2271 		ddi_prop_free(prop_val);
2272 	}
2273 
2274 	nxgep->intr_threshold = NXGE_RDC_RCR_THRESHOLD;
2275 	prop = param_arr[param_rxdma_intr_pkts].fcode_name;
2276 
2277 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2278 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2279 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
2280 			nxgep->intr_threshold = prop_val[0];
2281 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2282 			    nxgep->dip, prop, prop_val, prop_len);
2283 		}
2284 		ddi_prop_free(prop_val);
2285 	}
2286 	nxge_set_hw_dma_config(nxgep);
2287 
2288 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_dma_config: "
2289 	    "sTDC[%d] nTDC[%d] sRDC[%d] nRDC[%d]",
2290 	    p_cfgp->tdc.start, p_cfgp->tdc.count,
2291 	    p_cfgp->start_rdc, p_cfgp->max_rdcs));
2292 
2293 nxge_use_cfg_dma_config_exit:
2294 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_dma_config"));
2295 }
2296 
2297 void
2298 nxge_get_logical_props(p_nxge_t nxgep)
2299 {
2300 	nxge_dma_pt_cfg_t *port = &nxgep->pt_config;
2301 	nxge_hw_pt_cfg_t *hardware;
2302 	nxge_rdc_grp_t *group;
2303 
2304 	(void) memset(port, 0, sizeof (*port));
2305 
2306 	port->mac_port = nxgep->function_num;	/* := function number */
2307 
2308 	/*
2309 	 * alloc_buf_size:
2310 	 * dead variables.
2311 	 */
2312 	port->rbr_size = nxge_rbr_size;
2313 	port->rcr_size = nxge_rcr_size;
2314 
2315 	port->tx_dma_map = 0;	/* Transmit DMA channel bit map */
2316 
2317 	nxge_set_rdc_intr_property(nxgep);
2318 
2319 	port->rcr_full_header = NXGE_RCR_FULL_HEADER;
2320 	port->rx_drr_weight = PT_DRR_WT_DEFAULT_10G;
2321 
2322 	/* ----------------------------------------------------- */
2323 	hardware = &port->hw_config;
2324 
2325 	(void) memset(hardware, 0, sizeof (*hardware));
2326 
2327 	/*
2328 	 * partition_id, read_write_mode:
2329 	 * dead variables.
2330 	 */
2331 
2332 	/*
2333 	 * drr_wt, rx_full_header, *_ldg?, start_mac_entry,
2334 	 * mac_pref, def_mac_rxdma_grpid, start_vlan, max_vlans,
2335 	 * start_ldgs, max_ldgs, max_ldvs,
2336 	 * vlan_pref, def_vlan_rxdma_grpid are meaningful only
2337 	 * in the service domain.
2338 	 */
2339 
2340 	group = &port->rdc_grps[0];
2341 
2342 	group->flag = B_TRUE;	/* configured */
2343 	group->config_method = RDC_TABLE_ENTRY_METHOD_REP;
2344 	group->port = NXGE_GET_PORT_NUM(nxgep->function_num);
2345 
2346 	/* HIO futures: this is still an open question. */
2347 	hardware->max_macs = 1;
2348 }
2349 
2350 static void
2351 nxge_use_cfg_vlan_class_config(p_nxge_t nxgep)
2352 {
2353 	uint_t vlan_cnt;
2354 	int *vlan_cfg_val;
2355 	int status;
2356 	p_nxge_param_t param_arr;
2357 	char *prop;
2358 
2359 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_vlan_config"));
2360 	param_arr = nxgep->param_arr;
2361 	prop = param_arr[param_vlan_2rdc_grp].fcode_name;
2362 
2363 	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2364 	    &vlan_cfg_val, &vlan_cnt);
2365 	if (status == DDI_PROP_SUCCESS) {
2366 		status = ddi_prop_update_int_array(DDI_DEV_T_NONE,
2367 		    nxgep->dip, prop, vlan_cfg_val, vlan_cnt);
2368 		ddi_prop_free(vlan_cfg_val);
2369 	}
2370 	nxge_set_hw_vlan_class_config(nxgep);
2371 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_vlan_config"));
2372 }
2373 
2374 static void
2375 nxge_use_cfg_mac_class_config(p_nxge_t nxgep)
2376 {
2377 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2378 	p_nxge_hw_pt_cfg_t p_cfgp;
2379 	uint_t mac_cnt;
2380 	int *mac_cfg_val;
2381 	int status;
2382 	p_nxge_param_t param_arr;
2383 	char *prop;
2384 
2385 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_mac_class_config"));
2386 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2387 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2388 	p_cfgp->start_mac_entry = 0;
2389 	param_arr = nxgep->param_arr;
2390 	prop = param_arr[param_mac_2rdc_grp].fcode_name;
2391 
2392 	switch (nxgep->function_num) {
2393 	case 0:
2394 	case 1:
2395 		/* 10G ports */
2396 		p_cfgp->max_macs = NXGE_MAX_MACS_XMACS;
2397 		break;
2398 	case 2:
2399 	case 3:
2400 		/* 1G ports */
2401 	default:
2402 		p_cfgp->max_macs = NXGE_MAX_MACS_BMACS;
2403 		break;
2404 	}
2405 
2406 	p_cfgp->mac_pref = 1;
2407 	NXGE_DEBUG_MSG((nxgep, OBP_CTL,
2408 	    "== nxge_use_cfg_mac_class_config: "
2409 	    " mac_pref bit set def_mac_rxdma_grpid %d",
2410 	    p_cfgp->def_mac_rxdma_grpid));
2411 
2412 	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2413 	    &mac_cfg_val, &mac_cnt);
2414 	if (status == DDI_PROP_SUCCESS) {
2415 		if (mac_cnt <= p_cfgp->max_macs)
2416 			status = ddi_prop_update_int_array(DDI_DEV_T_NONE,
2417 			    nxgep->dip, prop, mac_cfg_val, mac_cnt);
2418 		ddi_prop_free(mac_cfg_val);
2419 	}
2420 	nxge_set_hw_mac_class_config(nxgep);
2421 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_mac_class_config"));
2422 }
2423 
2424 static void
2425 nxge_use_cfg_class_config(p_nxge_t nxgep)
2426 {
2427 	nxge_set_hw_class_config(nxgep);
2428 }
2429 
2430 static void
2431 nxge_set_rdc_intr_property(p_nxge_t nxgep)
2432 {
2433 	int i;
2434 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2435 
2436 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_rdc_intr_property"));
2437 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2438 
2439 	for (i = 0; i < NXGE_MAX_RDCS; i++) {
2440 		p_dma_cfgp->rcr_timeout[i] = nxgep->intr_timeout;
2441 		p_dma_cfgp->rcr_threshold[i] = nxgep->intr_threshold;
2442 	}
2443 
2444 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_rdc_intr_property"));
2445 }
2446 
2447 static void
2448 nxge_set_hw_dma_config(p_nxge_t nxgep)
2449 {
2450 	int			i, j, ngrps, bitmap, end, st_rdc;
2451 	p_nxge_dma_pt_cfg_t	p_dma_cfgp;
2452 	p_nxge_hw_pt_cfg_t	p_cfgp;
2453 	p_nxge_rdc_grp_t	rdc_grp_p;
2454 	p_nxge_tdc_grp_t	tdc_grp_p;
2455 	nxge_grp_t		*group;
2456 	uint8_t			nrdcs;
2457 	dc_map_t		map = 0;
2458 
2459 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_set_hw_dma_config"));
2460 
2461 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2462 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2463 
2464 	switch (nxgep->niu_type) {
2465 	case NEPTUNE_4_1GC:
2466 	case NEPTUNE_2_10GF_2_1GC:
2467 	case NEPTUNE_1_10GF_3_1GC:
2468 	case NEPTUNE_1_1GC_1_10GF_2_1GC:
2469 	case NEPTUNE_2_10GF_2_1GRF:
2470 	default:
2471 		ngrps = 2;
2472 		break;
2473 	case NEPTUNE_2_10GF:
2474 	case NEPTUNE_2_1GRF:
2475 	case N2_NIU:
2476 		ngrps = 4;
2477 		break;
2478 	}
2479 
2480 	/*
2481 	 * Setup TDC groups
2482 	 */
2483 	bitmap = 0;
2484 	end = p_cfgp->tdc.start + p_cfgp->tdc.owned;
2485 	for (i = p_cfgp->tdc.start; i < end; i++) {
2486 		bitmap |= (1 << i);
2487 	}
2488 
2489 	nxgep->tx_set.owned.map |= bitmap; /* Owned, & not shared. */
2490 	nxgep->tx_set.owned.count = p_cfgp->tdc.owned;
2491 	p_dma_cfgp->tx_dma_map = bitmap;
2492 
2493 	for (i = 0; i < ngrps; i++) {
2494 		group = (nxge_grp_t *)nxge_grp_add(nxgep,
2495 		    NXGE_TRANSMIT_GROUP);
2496 		tdc_grp_p = &p_dma_cfgp->tdc_grps[
2497 		    p_cfgp->def_mac_txdma_grpid + i];
2498 		if (i == 0)
2499 			tdc_grp_p->map = bitmap;
2500 		else
2501 			tdc_grp_p->map = 0;
2502 		/* no ring is associated with a group initially */
2503 		tdc_grp_p->start_tdc = 0;
2504 		tdc_grp_p->max_tdcs = 0;
2505 		tdc_grp_p->grp_index = group->index;
2506 	}
2507 
2508 	for (i = 0; i < NXGE_MAX_RDCS; i++) {
2509 		nxgep->rx_channel_started[i] = B_FALSE;
2510 	}
2511 
2512 	/*
2513 	 * Setup RDC groups
2514 	 */
2515 	st_rdc = p_cfgp->start_rdc;
2516 	for (i = 0; i < ngrps; i++) {
2517 		/*
2518 		 * All rings are associated with the default group initially
2519 		 */
2520 		if (i == 0) {
2521 			/* default group */
2522 			switch (nxgep->niu_type) {
2523 			case NEPTUNE_4_1GC:
2524 				nrdcs = rx_4_1G[nxgep->function_num];
2525 				break;
2526 			case N2_NIU:
2527 			case NEPTUNE_2_10GF:
2528 				nrdcs = rx_2_10G[nxgep->function_num];
2529 				break;
2530 			case NEPTUNE_2_10GF_2_1GC:
2531 				nrdcs = rx_2_10G_2_1G[nxgep->function_num];
2532 				break;
2533 			case NEPTUNE_1_10GF_3_1GC:
2534 				nrdcs = rx_1_10G_3_1G[nxgep->function_num];
2535 				break;
2536 			case NEPTUNE_1_1GC_1_10GF_2_1GC:
2537 				nrdcs = rx_1_1G_1_10G_2_1G[nxgep->function_num];
2538 				break;
2539 			default:
2540 				switch (nxgep->platform_type) {
2541 				case P_NEPTUNE_ALONSO:
2542 					nrdcs =
2543 					    rx_2_10G_2_1G[nxgep->function_num];
2544 					break;
2545 				default:
2546 					nrdcs = rx_4_1G[nxgep->function_num];
2547 					break;
2548 				}
2549 				break;
2550 			}
2551 
2552 			if (p_cfgp->max_rdcs < nrdcs)
2553 				nrdcs = p_cfgp->max_rdcs;
2554 		} else {
2555 			nrdcs = 0;
2556 		}
2557 
2558 		rdc_grp_p = &p_dma_cfgp->rdc_grps[
2559 		    p_cfgp->def_mac_rxdma_grpid + i];
2560 		rdc_grp_p->start_rdc = st_rdc;
2561 		rdc_grp_p->max_rdcs = nrdcs;
2562 		rdc_grp_p->def_rdc = rdc_grp_p->start_rdc;
2563 
2564 		/* default to: 0, 1, 2, 3, ...., 0, 1, 2, 3.... */
2565 		if (nrdcs != 0) {
2566 			for (j = 0; j < nrdcs; j++) {
2567 				map |= (1 << j);
2568 			}
2569 			map <<= rdc_grp_p->start_rdc;
2570 		} else
2571 			map = 0;
2572 		rdc_grp_p->map = map;
2573 
2574 		nxgep->rx_set.owned.map |= map; /* Owned, & not shared. */
2575 		nxgep->rx_set.owned.count = nrdcs;
2576 
2577 		group = (nxge_grp_t *)nxge_grp_add(nxgep, NXGE_RECEIVE_GROUP);
2578 
2579 		rdc_grp_p->config_method = RDC_TABLE_ENTRY_METHOD_SEQ;
2580 		rdc_grp_p->flag = B_TRUE; /* This group has been configured. */
2581 		rdc_grp_p->grp_index = group->index;
2582 		rdc_grp_p->port = NXGE_GET_PORT_NUM(nxgep->function_num);
2583 
2584 		map = 0;
2585 	}
2586 
2587 
2588 	/* default RDC */
2589 	p_cfgp->def_rdc = p_cfgp->start_rdc;
2590 	nxgep->def_rdc = p_cfgp->start_rdc;
2591 
2592 	/* full 18 byte header ? */
2593 	p_dma_cfgp->rcr_full_header = NXGE_RCR_FULL_HEADER;
2594 	p_dma_cfgp->rx_drr_weight = PT_DRR_WT_DEFAULT_10G;
2595 	if (nxgep->function_num > 1)
2596 		p_dma_cfgp->rx_drr_weight = PT_DRR_WT_DEFAULT_1G;
2597 	p_dma_cfgp->rbr_size = nxge_rbr_size;
2598 	p_dma_cfgp->rcr_size = nxge_rcr_size;
2599 
2600 	nxge_set_rdc_intr_property(nxgep);
2601 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_hw_dma_config"));
2602 }
2603 
2604 boolean_t
2605 nxge_check_rxdma_port_member(p_nxge_t nxgep, uint8_t rdc)
2606 {
2607 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2608 	p_nxge_hw_pt_cfg_t p_cfgp;
2609 	int status = B_TRUE;
2610 
2611 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_rxdma_port_member"));
2612 
2613 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2614 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2615 
2616 	/* Receive DMA Channels */
2617 	if (rdc < p_cfgp->max_rdcs)
2618 		status = B_TRUE;
2619 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_rxdma_port_member"));
2620 	return (status);
2621 }
2622 
2623 boolean_t
2624 nxge_check_txdma_port_member(p_nxge_t nxgep, uint8_t tdc)
2625 {
2626 	int status = B_FALSE;
2627 
2628 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_txdma_port_member"));
2629 
2630 	if (tdc >= nxgep->pt_config.hw_config.tdc.start &&
2631 	    tdc < nxgep->pt_config.hw_config.tdc.count)
2632 		status = B_TRUE;
2633 
2634 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_txdma_port_member"));
2635 	return (status);
2636 }
2637 
2638 boolean_t
2639 nxge_check_rxdma_rdcgrp_member(p_nxge_t nxgep, uint8_t rdc_grp, uint8_t rdc)
2640 {
2641 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2642 	int status = B_TRUE;
2643 	p_nxge_rdc_grp_t rdc_grp_p;
2644 
2645 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2646 	    " ==> nxge_check_rxdma_rdcgrp_member"));
2647 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "  nxge_check_rxdma_rdcgrp_member"
2648 	    " rdc  %d group %d", rdc, rdc_grp));
2649 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2650 
2651 	rdc_grp_p = &p_dma_cfgp->rdc_grps[rdc_grp];
2652 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "  max  %d ", rdc_grp_p->max_rdcs));
2653 	if (rdc >= rdc_grp_p->max_rdcs) {
2654 		status = B_FALSE;
2655 	}
2656 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2657 	    " <== nxge_check_rxdma_rdcgrp_member"));
2658 	return (status);
2659 }
2660 
2661 boolean_t
2662 nxge_check_rdcgrp_port_member(p_nxge_t nxgep, uint8_t rdc_grp)
2663 {
2664 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2665 	p_nxge_hw_pt_cfg_t p_cfgp;
2666 	int status = B_TRUE;
2667 
2668 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_rdcgrp_port_member"));
2669 
2670 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2671 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2672 
2673 	if (rdc_grp >= p_cfgp->max_rdc_grpids)
2674 		status = B_FALSE;
2675 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_rdcgrp_port_member"));
2676 	return (status);
2677 }
2678 
2679 static void
2680 nxge_set_hw_vlan_class_config(p_nxge_t nxgep)
2681 {
2682 	int i;
2683 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2684 	p_nxge_hw_pt_cfg_t p_cfgp;
2685 	p_nxge_param_t param_arr;
2686 	uint_t vlan_cnt;
2687 	int *vlan_cfg_val;
2688 	nxge_param_map_t *vmap;
2689 	char *prop;
2690 	p_nxge_class_pt_cfg_t p_class_cfgp;
2691 	uint32_t good_cfg[32];
2692 	int good_count = 0;
2693 	nxge_mv_cfg_t *vlan_tbl;
2694 
2695 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_hw_vlan_config"));
2696 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2697 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2698 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2699 
2700 	param_arr = nxgep->param_arr;
2701 	prop = param_arr[param_vlan_2rdc_grp].fcode_name;
2702 
2703 	/*
2704 	 * By default, VLAN to RDC group mapping is disabled Need to read HW or
2705 	 * .conf properties to find out if mapping is required
2706 	 *
2707 	 * Format
2708 	 *
2709 	 * uint32_t array, each array entry specifying the VLAN id and the
2710 	 * mapping
2711 	 *
2712 	 * bit[30] = add bit[29] = remove bit[28]  = preference bits[23-16] =
2713 	 * rdcgrp bits[15-0] = VLAN ID ( )
2714 	 */
2715 
2716 	for (i = 0; i < NXGE_MAX_VLANS; i++) {
2717 		p_class_cfgp->vlan_tbl[i].flag = 0;
2718 	}
2719 
2720 	vlan_tbl = (nxge_mv_cfg_t *)&p_class_cfgp->vlan_tbl[0];
2721 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2722 	    &vlan_cfg_val, &vlan_cnt) == DDI_PROP_SUCCESS) {
2723 		for (i = 0; i < vlan_cnt; i++) {
2724 			vmap = (nxge_param_map_t *)&vlan_cfg_val[i];
2725 			if ((vmap->param_id) &&
2726 			    (vmap->param_id < NXGE_MAX_VLANS) &&
2727 			    (vmap->map_to <
2728 			    p_cfgp->max_rdc_grpids) &&
2729 			    (vmap->map_to >= (uint8_t)0)) {
2730 				NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2731 				    " nxge_vlan_config mapping"
2732 				    " id %d grp %d",
2733 				    vmap->param_id, vmap->map_to));
2734 				good_cfg[good_count] = vlan_cfg_val[i];
2735 				if (vlan_tbl[vmap->param_id].flag == 0)
2736 					good_count++;
2737 				vlan_tbl[vmap->param_id].flag = 1;
2738 				vlan_tbl[vmap->param_id].rdctbl =
2739 				    vmap->map_to + p_cfgp->def_mac_rxdma_grpid;
2740 				vlan_tbl[vmap->param_id].mpr_npr = vmap->pref;
2741 			}
2742 		}
2743 		ddi_prop_free(vlan_cfg_val);
2744 		if (good_count != vlan_cnt) {
2745 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2746 			    nxgep->dip, prop, (int *)good_cfg, good_count);
2747 		}
2748 	}
2749 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_set_hw_vlan_config"));
2750 }
2751 
2752 static void
2753 nxge_set_hw_mac_class_config(p_nxge_t nxgep)
2754 {
2755 	int i;
2756 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2757 	p_nxge_hw_pt_cfg_t p_cfgp;
2758 	p_nxge_param_t param_arr;
2759 	uint_t mac_cnt;
2760 	int *mac_cfg_val;
2761 	nxge_param_map_t *mac_map;
2762 	char *prop;
2763 	p_nxge_class_pt_cfg_t p_class_cfgp;
2764 	int good_count = 0;
2765 	int good_cfg[NXGE_MAX_MACS];
2766 	nxge_mv_cfg_t *mac_host_info;
2767 
2768 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_set_hw_mac_config"));
2769 
2770 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2771 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2772 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2773 	mac_host_info = (nxge_mv_cfg_t *)&p_class_cfgp->mac_host_info[0];
2774 
2775 	param_arr = nxgep->param_arr;
2776 	prop = param_arr[param_mac_2rdc_grp].fcode_name;
2777 
2778 	for (i = 0; i < NXGE_MAX_MACS; i++) {
2779 		p_class_cfgp->mac_host_info[i].flag = 0;
2780 		p_class_cfgp->mac_host_info[i].rdctbl =
2781 		    p_cfgp->def_mac_rxdma_grpid;
2782 	}
2783 
2784 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2785 	    &mac_cfg_val, &mac_cnt) == DDI_PROP_SUCCESS) {
2786 		for (i = 0; i < mac_cnt; i++) {
2787 			mac_map = (nxge_param_map_t *)&mac_cfg_val[i];
2788 			if ((mac_map->param_id < p_cfgp->max_macs) &&
2789 			    (mac_map->map_to <
2790 			    p_cfgp->max_rdc_grpids) &&
2791 			    (mac_map->map_to >= (uint8_t)0)) {
2792 				NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2793 				    " nxge_mac_config mapping"
2794 				    " id %d grp %d",
2795 				    mac_map->param_id, mac_map->map_to));
2796 				mac_host_info[mac_map->param_id].mpr_npr =
2797 				    p_cfgp->mac_pref;
2798 				mac_host_info[mac_map->param_id].rdctbl =
2799 				    mac_map->map_to +
2800 				    p_cfgp->def_mac_rxdma_grpid;
2801 				good_cfg[good_count] = mac_cfg_val[i];
2802 				if (mac_host_info[mac_map->param_id].flag == 0)
2803 					good_count++;
2804 				mac_host_info[mac_map->param_id].flag = 1;
2805 			}
2806 		}
2807 		ddi_prop_free(mac_cfg_val);
2808 		if (good_count != mac_cnt) {
2809 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2810 			    nxgep->dip, prop, good_cfg, good_count);
2811 		}
2812 	}
2813 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_set_hw_mac_config"));
2814 }
2815 
2816 static void
2817 nxge_set_hw_class_config(p_nxge_t nxgep)
2818 {
2819 	int i;
2820 	p_nxge_param_t param_arr;
2821 	int *int_prop_val;
2822 	uint32_t cfg_value;
2823 	char *prop;
2824 	p_nxge_class_pt_cfg_t p_class_cfgp;
2825 	int start_prop, end_prop;
2826 	uint_t prop_cnt;
2827 	int start_class, j = 0;
2828 
2829 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_hw_class_config"));
2830 
2831 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2832 	param_arr = nxgep->param_arr;
2833 	start_prop = param_class_opt_ipv4_tcp;
2834 	end_prop = param_class_opt_ipv6_sctp;
2835 	start_class = TCAM_CLASS_TCP_IPV4;
2836 
2837 	for (i = start_prop, j = 0; i <= end_prop; i++, j++) {
2838 		prop = param_arr[i].fcode_name;
2839 		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip,
2840 		    0, prop, &int_prop_val,
2841 		    &prop_cnt) == DDI_PROP_SUCCESS) {
2842 			cfg_value = (uint32_t)*int_prop_val;
2843 			ddi_prop_free(int_prop_val);
2844 		} else {
2845 			cfg_value = (uint32_t)param_arr[i].value;
2846 		}
2847 		p_class_cfgp->class_cfg[start_class + j] = cfg_value;
2848 	}
2849 
2850 	prop = param_arr[param_h1_init_value].fcode_name;
2851 
2852 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2853 	    &int_prop_val, &prop_cnt) == DDI_PROP_SUCCESS) {
2854 		cfg_value = (uint32_t)*int_prop_val;
2855 		ddi_prop_free(int_prop_val);
2856 	} else {
2857 		cfg_value = (uint32_t)param_arr[param_h1_init_value].value;
2858 	}
2859 
2860 	p_class_cfgp->init_h1 = (uint32_t)cfg_value;
2861 	prop = param_arr[param_h2_init_value].fcode_name;
2862 
2863 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2864 	    &int_prop_val, &prop_cnt) == DDI_PROP_SUCCESS) {
2865 		cfg_value = (uint32_t)*int_prop_val;
2866 		ddi_prop_free(int_prop_val);
2867 	} else {
2868 		cfg_value = (uint32_t)param_arr[param_h2_init_value].value;
2869 	}
2870 
2871 	p_class_cfgp->init_h2 = (uint16_t)cfg_value;
2872 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_hw_class_config"));
2873 }
2874 
2875 nxge_status_t
2876 nxge_ldgv_init_n2(p_nxge_t nxgep, int *navail_p, int *nrequired_p)
2877 {
2878 	int i, maxldvs, maxldgs, nldvs;
2879 	int ldv, endldg;
2880 	uint8_t func;
2881 	uint8_t channel;
2882 	uint8_t chn_start;
2883 	boolean_t own_sys_err = B_FALSE, own_fzc = B_FALSE;
2884 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2885 	p_nxge_hw_pt_cfg_t p_cfgp;
2886 	p_nxge_ldgv_t ldgvp;
2887 	p_nxge_ldg_t ldgp, ptr;
2888 	p_nxge_ldv_t ldvp, sysldvp;
2889 	nxge_status_t status = NXGE_OK;
2890 	nxge_grp_set_t *set;
2891 
2892 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2"));
2893 	if (!*navail_p) {
2894 		*nrequired_p = 0;
2895 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2896 		    "<== nxge_ldgv_init:no avail"));
2897 		return (NXGE_ERROR);
2898 	}
2899 	/*
2900 	 * N2/NIU: one logical device owns one logical group. and each
2901 	 * device/group will be assigned one vector by Hypervisor.
2902 	 */
2903 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2904 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2905 	maxldgs = p_cfgp->max_ldgs;
2906 	if (!maxldgs) {
2907 		/* No devices configured. */
2908 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_init_n2: "
2909 		    "no logical groups configured."));
2910 		return (NXGE_ERROR);
2911 	} else {
2912 		maxldvs = maxldgs + 1;
2913 	}
2914 
2915 	/*
2916 	 * If function zero instance, it needs to handle the system and MIF
2917 	 * error interrupts. MIF interrupt may not be needed for N2/NIU.
2918 	 */
2919 	func = nxgep->function_num;
2920 	if (func == 0) {
2921 		own_sys_err = B_TRUE;
2922 		if (!p_cfgp->ser_ldvid) {
2923 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2924 			    "nxge_ldgv_init_n2: func 0, ERR ID not set!"));
2925 		}
2926 		/* MIF interrupt */
2927 		if (!p_cfgp->mif_ldvid) {
2928 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2929 			    "nxge_ldgv_init_n2: func 0, MIF ID not set!"));
2930 		}
2931 	}
2932 
2933 	/*
2934 	 * Assume single partition, each function owns mac.
2935 	 */
2936 	if (!nxge_use_partition)
2937 		own_fzc = B_TRUE;
2938 
2939 	ldgvp = nxgep->ldgvp;
2940 	if (ldgvp == NULL) {
2941 		ldgvp = KMEM_ZALLOC(sizeof (nxge_ldgv_t), KM_SLEEP);
2942 		nxgep->ldgvp = ldgvp;
2943 		ldgvp->maxldgs = (uint8_t)maxldgs;
2944 		ldgvp->maxldvs = (uint8_t)maxldvs;
2945 		ldgp = ldgvp->ldgp = KMEM_ZALLOC(
2946 		    sizeof (nxge_ldg_t) * maxldgs, KM_SLEEP);
2947 		ldvp = ldgvp->ldvp = KMEM_ZALLOC(
2948 		    sizeof (nxge_ldv_t) * maxldvs, KM_SLEEP);
2949 	} else {
2950 		ldgp = ldgvp->ldgp;
2951 		ldvp = ldgvp->ldvp;
2952 	}
2953 
2954 	ldgvp->ndma_ldvs = p_cfgp->tdc.owned + p_cfgp->max_rdcs;
2955 	ldgvp->tmres = NXGE_TIMER_RESO;
2956 
2957 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
2958 	    "==> nxge_ldgv_init_n2: maxldvs %d maxldgs %d",
2959 	    maxldvs, maxldgs));
2960 
2961 	/* logical start_ldg is ldv */
2962 	ptr = ldgp;
2963 	for (i = 0; i < maxldgs; i++) {
2964 		ptr->func = func;
2965 		ptr->arm = B_TRUE;
2966 		ptr->vldg_index = (uint8_t)i;
2967 		ptr->ldg_timer = NXGE_TIMER_LDG;
2968 		ptr->ldg = p_cfgp->ldg[i];
2969 		ptr->sys_intr_handler = nxge_intr;
2970 		ptr->nldvs = 0;
2971 		ptr->ldvp = NULL;
2972 		ptr->nxgep = nxgep;
2973 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
2974 		    "==> nxge_ldgv_init_n2: maxldvs %d maxldgs %d "
2975 		    "ldg %d ldgptr $%p",
2976 		    maxldvs, maxldgs, ptr->ldg, ptr));
2977 		ptr++;
2978 	}
2979 
2980 	endldg = NXGE_INT_MAX_LDG;
2981 	nldvs = 0;
2982 	ldgvp->nldvs = 0;
2983 	ldgp->ldvp = NULL;
2984 	*nrequired_p = 0;
2985 
2986 	/*
2987 	 * logical device group table is organized in the following order (same
2988 	 * as what interrupt property has). function 0: owns MAC, MIF, error,
2989 	 * rx, tx. function 1: owns MAC, rx, tx.
2990 	 */
2991 
2992 	if (own_fzc && p_cfgp->mac_ldvid) {
2993 		/* Each function should own MAC interrupt */
2994 		ldv = p_cfgp->mac_ldvid;
2995 		ldvp->ldv = (uint8_t)ldv;
2996 		ldvp->is_mac = B_TRUE;
2997 		ldvp->ldv_intr_handler = nxge_mac_intr;
2998 		ldvp->ldv_ldf_masks = 0;
2999 		ldvp->nxgep = nxgep;
3000 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3001 		    "==> nxge_ldgv_init_n2(mac): maxldvs %d ldv %d "
3002 		    "ldg %d ldgptr $%p ldvptr $%p",
3003 		    maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3004 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3005 		nldvs++;
3006 	}
3007 
3008 	if (own_fzc && p_cfgp->mif_ldvid) {
3009 		ldv = p_cfgp->mif_ldvid;
3010 		ldvp->ldv = (uint8_t)ldv;
3011 		ldvp->is_mif = B_TRUE;
3012 		ldvp->ldv_intr_handler = nxge_mif_intr;
3013 		ldvp->ldv_ldf_masks = 0;
3014 		ldvp->nxgep = nxgep;
3015 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3016 		    "==> nxge_ldgv_init_n2(mif): maxldvs %d ldv %d "
3017 		    "ldg %d ldgptr $%p ldvptr $%p",
3018 		    maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3019 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3020 		nldvs++;
3021 	}
3022 
3023 	/*
3024 	 * HW based syserr interrupt for port0, and SW based syserr interrupt
3025 	 * for port1
3026 	 */
3027 	if (own_sys_err && p_cfgp->ser_ldvid) {
3028 		ldv = p_cfgp->ser_ldvid;
3029 		/*
3030 		 * Unmask the system interrupt states.
3031 		 */
3032 		(void) nxge_fzc_sys_err_mask_set(nxgep, SYS_ERR_SMX_MASK |
3033 		    SYS_ERR_IPP_MASK | SYS_ERR_TXC_MASK |
3034 		    SYS_ERR_ZCP_MASK);
3035 
3036 		ldvp->use_timer = B_TRUE;
3037 		ldvp->ldv = (uint8_t)ldv;
3038 		ldvp->is_syserr = B_TRUE;
3039 		ldvp->ldv_intr_handler = nxge_syserr_intr;
3040 		ldvp->ldv_ldf_masks = 0;
3041 		ldvp->nxgep = nxgep;
3042 		ldgvp->ldvp_syserr = ldvp;
3043 
3044 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3045 		    "==> nxge_ldgv_init_n2(syserr): maxldvs %d ldv %d "
3046 		    "ldg %d ldgptr $%p ldvptr p%p",
3047 		    maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3048 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3049 		nldvs++;
3050 	} else {
3051 		/*
3052 		 * SW based: allocate the ldv for the syserr since the vector
3053 		 * should not be consumed for port1
3054 		 */
3055 		sysldvp = KMEM_ZALLOC(sizeof (nxge_ldv_t), KM_SLEEP);
3056 		sysldvp->use_timer = B_TRUE;
3057 		sysldvp->ldv = NXGE_SYS_ERROR_LD;
3058 		sysldvp->is_syserr = B_TRUE;
3059 		sysldvp->ldv_intr_handler = nxge_syserr_intr;
3060 		sysldvp->ldv_ldf_masks = 0;
3061 		sysldvp->nxgep = nxgep;
3062 		ldgvp->ldvp_syserr = sysldvp;
3063 		ldgvp->ldvp_syserr_alloced = B_TRUE;
3064 	}
3065 
3066 
3067 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3068 	    "(before rx) func %d nldvs %d navail %d nrequired %d",
3069 	    func, nldvs, *navail_p, *nrequired_p));
3070 
3071 	/*
3072 	 * Start with RDC to configure logical devices for each group.
3073 	 */
3074 	chn_start = p_cfgp->ldg_chn_start;
3075 	set = &nxgep->rx_set;
3076 	for (channel = 0; channel < NXGE_MAX_RDCS; channel++) {
3077 		if ((1 << channel) & set->owned.map) {
3078 			ldvp->is_rxdma = B_TRUE;
3079 			ldvp->ldv = (uint8_t)channel + NXGE_RDMA_LD_START;
3080 			ldvp->channel = channel;
3081 			ldvp->vdma_index = (uint8_t)channel;
3082 			ldvp->ldv_intr_handler = nxge_rx_intr;
3083 			ldvp->ldv_ldf_masks = 0;
3084 			ldvp->nxgep = nxgep;
3085 			ldgp->ldg = p_cfgp->ldg[chn_start];
3086 
3087 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3088 			    "==> nxge_ldgv_init_n2(rx%d): maxldvs %d ldv %d "
3089 			    "ldg %d ldgptr 0x%016llx ldvptr 0x%016llx",
3090 			    i, maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3091 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3092 			    endldg, nrequired_p);
3093 			nldvs++;
3094 			chn_start++;
3095 		}
3096 	}
3097 
3098 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3099 	    "func %d nldvs %d navail %d nrequired %d",
3100 	    func, nldvs, *navail_p, *nrequired_p));
3101 
3102 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3103 	    "func %d nldvs %d navail %d nrequired %d ldgp 0x%llx "
3104 	    "ldvp 0x%llx",
3105 	    func, nldvs, *navail_p, *nrequired_p, ldgp, ldvp));
3106 	/*
3107 	 * Transmit DMA channels.
3108 	 */
3109 	chn_start = p_cfgp->ldg_chn_start + 8;
3110 	set = &nxgep->tx_set;
3111 	for (channel = 0; channel < NXGE_MAX_TDCS; channel++) {
3112 		if ((1 << channel) & set->owned.map) {
3113 			ldvp->is_txdma = B_TRUE;
3114 			ldvp->ldv = (uint8_t)channel + NXGE_TDMA_LD_START;
3115 			ldvp->channel = channel;
3116 			ldvp->vdma_index = (uint8_t)channel;
3117 			ldvp->ldv_intr_handler = nxge_tx_intr;
3118 			ldvp->ldv_ldf_masks = 0;
3119 			ldgp->ldg = p_cfgp->ldg[chn_start];
3120 			ldvp->nxgep = nxgep;
3121 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3122 			    "==> nxge_ldgv_init_n2(tx%d): maxldvs %d ldv %d "
3123 			    "ldg %d ldgptr %p ldvptr %p",
3124 			    channel, maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3125 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3126 			    endldg, nrequired_p);
3127 			nldvs++;
3128 			chn_start++;
3129 		}
3130 	}
3131 
3132 	ldgvp->ldg_intrs = *nrequired_p;
3133 	ldgvp->nldvs = (uint8_t)nldvs;
3134 
3135 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3136 	    "func %d nldvs %d maxgrps %d navail %d nrequired %d",
3137 	    func, nldvs, maxldgs, *navail_p, *nrequired_p));
3138 
3139 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_init_n2"));
3140 	return (status);
3141 }
3142 
3143 /*
3144  * Interrupts related interface functions.
3145  */
3146 
3147 nxge_status_t
3148 nxge_ldgv_init(p_nxge_t nxgep, int *navail_p, int *nrequired_p)
3149 {
3150 	int i, maxldvs, maxldgs, nldvs;
3151 	int ldv, ldg, endldg, ngrps;
3152 	uint8_t func;
3153 	uint8_t channel;
3154 	boolean_t own_sys_err = B_FALSE, own_fzc = B_FALSE;
3155 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
3156 	p_nxge_hw_pt_cfg_t p_cfgp;
3157 	p_nxge_ldgv_t ldgvp;
3158 	p_nxge_ldg_t ldgp, ptr;
3159 	p_nxge_ldv_t ldvp;
3160 	nxge_grp_set_t *set;
3161 
3162 	nxge_status_t status = NXGE_OK;
3163 
3164 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init"));
3165 	if (!*navail_p) {
3166 		*nrequired_p = 0;
3167 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3168 		    "<== nxge_ldgv_init:no avail"));
3169 		return (NXGE_ERROR);
3170 	}
3171 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
3172 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
3173 
3174 	nldvs = p_cfgp->tdc.owned + p_cfgp->max_rdcs;
3175 
3176 	/*
3177 	 * If function zero instance, it needs to handle the system error
3178 	 * interrupts.
3179 	 */
3180 	func = nxgep->function_num;
3181 	if (func == 0) {
3182 		nldvs++;
3183 		own_sys_err = B_TRUE;
3184 	} else {
3185 		/* use timer */
3186 		nldvs++;
3187 	}
3188 
3189 	/*
3190 	 * Assume single partition, each function owns mac.
3191 	 */
3192 	if (!nxge_use_partition) {
3193 		/* mac */
3194 		nldvs++;
3195 		/* MIF */
3196 		nldvs++;
3197 		own_fzc = B_TRUE;
3198 	}
3199 	maxldvs = nldvs;
3200 	maxldgs = p_cfgp->max_ldgs;
3201 	if (!maxldvs || !maxldgs) {
3202 		/* No devices configured. */
3203 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_init: "
3204 		    "no logical devices or groups configured."));
3205 		return (NXGE_ERROR);
3206 	}
3207 	ldgvp = nxgep->ldgvp;
3208 	if (ldgvp == NULL) {
3209 		ldgvp = KMEM_ZALLOC(sizeof (nxge_ldgv_t), KM_SLEEP);
3210 		nxgep->ldgvp = ldgvp;
3211 		ldgvp->maxldgs = (uint8_t)maxldgs;
3212 		ldgvp->maxldvs = (uint8_t)maxldvs;
3213 		ldgp = ldgvp->ldgp = KMEM_ZALLOC(sizeof (nxge_ldg_t) * maxldgs,
3214 		    KM_SLEEP);
3215 		ldvp = ldgvp->ldvp = KMEM_ZALLOC(sizeof (nxge_ldv_t) * maxldvs,
3216 		    KM_SLEEP);
3217 	}
3218 	ldgvp->ndma_ldvs = p_cfgp->tdc.owned + p_cfgp->max_rdcs;
3219 	ldgvp->tmres = NXGE_TIMER_RESO;
3220 
3221 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3222 	    "==> nxge_ldgv_init: maxldvs %d maxldgs %d nldvs %d",
3223 	    maxldvs, maxldgs, nldvs));
3224 	ldg = p_cfgp->start_ldg;
3225 	ptr = ldgp;
3226 	for (i = 0; i < maxldgs; i++) {
3227 		ptr->func = func;
3228 		ptr->arm = B_TRUE;
3229 		ptr->vldg_index = (uint8_t)i;
3230 		ptr->ldg_timer = NXGE_TIMER_LDG;
3231 		ptr->ldg = ldg++;
3232 		ptr->sys_intr_handler = nxge_intr;
3233 		ptr->nldvs = 0;
3234 		ptr->nxgep = nxgep;
3235 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3236 		    "==> nxge_ldgv_init: maxldvs %d maxldgs %d ldg %d",
3237 		    maxldvs, maxldgs, ptr->ldg));
3238 		ptr++;
3239 	}
3240 
3241 	ldg = p_cfgp->start_ldg;
3242 	if (maxldgs > *navail_p) {
3243 		ngrps = *navail_p;
3244 	} else {
3245 		ngrps = maxldgs;
3246 	}
3247 	endldg = ldg + ngrps;
3248 
3249 	/*
3250 	 * Receive DMA channels.
3251 	 */
3252 	nldvs = 0;
3253 	ldgvp->nldvs = 0;
3254 	ldgp->ldvp = NULL;
3255 	*nrequired_p = 0;
3256 
3257 	/*
3258 	 * Start with RDC to configure logical devices for each group.
3259 	 */
3260 	set = &nxgep->rx_set;
3261 	for (channel = 0; channel < NXGE_MAX_RDCS; channel++) {
3262 		if ((1 << channel) & set->owned.map) {
3263 			/* For now, <channel & <vdma_index> are the same. */
3264 			ldvp->is_rxdma = B_TRUE;
3265 			ldvp->ldv = (uint8_t)channel + NXGE_RDMA_LD_START;
3266 			ldvp->channel = channel;
3267 			ldvp->vdma_index = (uint8_t)channel;
3268 			ldvp->ldv_intr_handler = nxge_rx_intr;
3269 			ldvp->ldv_ldf_masks = 0;
3270 			ldvp->use_timer = B_FALSE;
3271 			ldvp->nxgep = nxgep;
3272 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3273 			    endldg, nrequired_p);
3274 			nldvs++;
3275 		}
3276 	}
3277 
3278 	/*
3279 	 * Transmit DMA channels.
3280 	 */
3281 	set = &nxgep->tx_set;
3282 	for (channel = 0; channel < NXGE_MAX_TDCS; channel++) {
3283 		if ((1 << channel) & set->owned.map) {
3284 			/* For now, <channel & <vdma_index> are the same. */
3285 			ldvp->is_txdma = B_TRUE;
3286 			ldvp->ldv = (uint8_t)channel + NXGE_TDMA_LD_START;
3287 			ldvp->channel = channel;
3288 			ldvp->vdma_index = (uint8_t)channel;
3289 			ldvp->ldv_intr_handler = nxge_tx_intr;
3290 			ldvp->ldv_ldf_masks = 0;
3291 			ldvp->use_timer = B_FALSE;
3292 			ldvp->nxgep = nxgep;
3293 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3294 			    endldg, nrequired_p);
3295 			nldvs++;
3296 		}
3297 	}
3298 
3299 	if (own_fzc) {
3300 		ldv = NXGE_MIF_LD;
3301 		ldvp->ldv = (uint8_t)ldv;
3302 		ldvp->is_mif = B_TRUE;
3303 		ldvp->ldv_intr_handler = nxge_mif_intr;
3304 		ldvp->ldv_ldf_masks = 0;
3305 		ldvp->use_timer = B_FALSE;
3306 		ldvp->nxgep = nxgep;
3307 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3308 		nldvs++;
3309 	}
3310 	/*
3311 	 * MAC port (function zero control)
3312 	 */
3313 	if (own_fzc) {
3314 		ldvp->is_mac = B_TRUE;
3315 		ldvp->ldv_intr_handler = nxge_mac_intr;
3316 		ldvp->ldv_ldf_masks = 0;
3317 		ldv = func + NXGE_MAC_LD_START;
3318 		ldvp->ldv = (uint8_t)ldv;
3319 		ldvp->use_timer = B_FALSE;
3320 		ldvp->nxgep = nxgep;
3321 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3322 		nldvs++;
3323 	}
3324 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init: "
3325 	    "func %d nldvs %d navail %d nrequired %d",
3326 	    func, nldvs, *navail_p, *nrequired_p));
3327 	/*
3328 	 * Function 0 owns system error interrupts.
3329 	 */
3330 	ldvp->use_timer = B_TRUE;
3331 	if (own_sys_err) {
3332 		ldv = NXGE_SYS_ERROR_LD;
3333 		ldvp->ldv = (uint8_t)ldv;
3334 		ldvp->is_syserr = B_TRUE;
3335 		ldvp->ldv_intr_handler = nxge_syserr_intr;
3336 		ldvp->ldv_ldf_masks = 0;
3337 		ldvp->nxgep = nxgep;
3338 		ldgvp->ldvp_syserr = ldvp;
3339 		/*
3340 		 * Unmask the system interrupt states.
3341 		 */
3342 		(void) nxge_fzc_sys_err_mask_set(nxgep, SYS_ERR_SMX_MASK |
3343 		    SYS_ERR_IPP_MASK | SYS_ERR_TXC_MASK |
3344 		    SYS_ERR_ZCP_MASK);
3345 
3346 		(void) nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3347 		nldvs++;
3348 	} else {
3349 		ldv = NXGE_SYS_ERROR_LD;
3350 		ldvp->ldv = (uint8_t)ldv;
3351 		ldvp->is_syserr = B_TRUE;
3352 		ldvp->ldv_intr_handler = nxge_syserr_intr;
3353 		ldvp->nxgep = nxgep;
3354 		ldvp->ldv_ldf_masks = 0;
3355 		ldgvp->ldvp_syserr = ldvp;
3356 	}
3357 
3358 	ldgvp->ldg_intrs = *nrequired_p;
3359 
3360 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init: "
3361 	    "func %d nldvs %d navail %d nrequired %d",
3362 	    func, nldvs, *navail_p, *nrequired_p));
3363 
3364 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_init"));
3365 	return (status);
3366 }
3367 
3368 nxge_status_t
3369 nxge_ldgv_uninit(p_nxge_t nxgep)
3370 {
3371 	p_nxge_ldgv_t ldgvp;
3372 
3373 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_uninit"));
3374 	ldgvp = nxgep->ldgvp;
3375 	if (ldgvp == NULL) {
3376 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_uninit: "
3377 		    "no logical group configured."));
3378 		return (NXGE_OK);
3379 	}
3380 	if (ldgvp->ldvp_syserr_alloced == B_TRUE) {
3381 		KMEM_FREE(ldgvp->ldvp_syserr, sizeof (nxge_ldv_t));
3382 	}
3383 	if (ldgvp->ldgp) {
3384 		KMEM_FREE(ldgvp->ldgp, sizeof (nxge_ldg_t) * ldgvp->maxldgs);
3385 	}
3386 	if (ldgvp->ldvp) {
3387 		KMEM_FREE(ldgvp->ldvp, sizeof (nxge_ldv_t) * ldgvp->maxldvs);
3388 	}
3389 	KMEM_FREE(ldgvp, sizeof (nxge_ldgv_t));
3390 	nxgep->ldgvp = NULL;
3391 
3392 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_uninit"));
3393 	return (NXGE_OK);
3394 }
3395 
3396 nxge_status_t
3397 nxge_intr_ldgv_init(p_nxge_t nxgep)
3398 {
3399 	nxge_status_t status = NXGE_OK;
3400 
3401 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_intr_ldgv_init"));
3402 	/*
3403 	 * Configure the logical device group numbers, state vectors and
3404 	 * interrupt masks for each logical device.
3405 	 */
3406 	status = nxge_fzc_intr_init(nxgep);
3407 
3408 	/*
3409 	 * Configure logical device masks and timers.
3410 	 */
3411 	status = nxge_intr_mask_mgmt(nxgep);
3412 
3413 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_intr_ldgv_init"));
3414 	return (status);
3415 }
3416 
3417 nxge_status_t
3418 nxge_intr_mask_mgmt(p_nxge_t nxgep)
3419 {
3420 	p_nxge_ldgv_t ldgvp;
3421 	p_nxge_ldg_t ldgp;
3422 	p_nxge_ldv_t ldvp;
3423 	npi_handle_t handle;
3424 	int i, j;
3425 	npi_status_t rs = NPI_SUCCESS;
3426 
3427 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_intr_mask_mgmt"));
3428 
3429 	if ((ldgvp = nxgep->ldgvp) == NULL) {
3430 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3431 		    "<== nxge_intr_mask_mgmt: Null ldgvp"));
3432 		return (NXGE_ERROR);
3433 	}
3434 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
3435 	ldgp = ldgvp->ldgp;
3436 	ldvp = ldgvp->ldvp;
3437 	if (ldgp == NULL || ldvp == NULL) {
3438 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3439 		    "<== nxge_intr_mask_mgmt: Null ldgp or ldvp"));
3440 		return (NXGE_ERROR);
3441 	}
3442 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3443 	    "==> nxge_intr_mask_mgmt: # of intrs %d ", ldgvp->ldg_intrs));
3444 	/* Initialize masks. */
3445 	if (nxgep->niu_type != N2_NIU) {
3446 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3447 		    "==> nxge_intr_mask_mgmt(Neptune): # intrs %d ",
3448 		    ldgvp->ldg_intrs));
3449 		for (i = 0; i < ldgvp->ldg_intrs; i++, ldgp++) {
3450 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3451 			    "==> nxge_intr_mask_mgmt(Neptune): # ldv %d "
3452 			    "in group %d", ldgp->nldvs, ldgp->ldg));
3453 			for (j = 0; j < ldgp->nldvs; j++, ldvp++) {
3454 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3455 				    "==> nxge_intr_mask_mgmt: set ldv # %d "
3456 				    "for ldg %d", ldvp->ldv, ldgp->ldg));
3457 				rs = npi_intr_mask_set(handle, ldvp->ldv,
3458 				    ldvp->ldv_ldf_masks);
3459 				if (rs != NPI_SUCCESS) {
3460 					NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3461 					    "<== nxge_intr_mask_mgmt: "
3462 					    "set mask failed "
3463 					    " rs 0x%x ldv %d mask 0x%x",
3464 					    rs, ldvp->ldv,
3465 					    ldvp->ldv_ldf_masks));
3466 					return (NXGE_ERROR | rs);
3467 				}
3468 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3469 				    "==> nxge_intr_mask_mgmt: "
3470 				    "set mask OK "
3471 				    " rs 0x%x ldv %d mask 0x%x",
3472 				    rs, ldvp->ldv,
3473 				    ldvp->ldv_ldf_masks));
3474 			}
3475 		}
3476 	}
3477 	ldgp = ldgvp->ldgp;
3478 	/* Configure timer and arm bit */
3479 	for (i = 0; i < nxgep->ldgvp->ldg_intrs; i++, ldgp++) {
3480 		rs = npi_intr_ldg_mgmt_set(handle, ldgp->ldg,
3481 		    ldgp->arm, ldgp->ldg_timer);
3482 		if (rs != NPI_SUCCESS) {
3483 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3484 			    "<== nxge_intr_mask_mgmt: "
3485 			    "set timer failed "
3486 			    " rs 0x%x dg %d timer 0x%x",
3487 			    rs, ldgp->ldg, ldgp->ldg_timer));
3488 			return (NXGE_ERROR | rs);
3489 		}
3490 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3491 		    "==> nxge_intr_mask_mgmt: "
3492 		    "set timer OK "
3493 		    " rs 0x%x ldg %d timer 0x%x",
3494 		    rs, ldgp->ldg, ldgp->ldg_timer));
3495 	}
3496 
3497 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_fzc_intr_mask_mgmt"));
3498 	return (NXGE_OK);
3499 }
3500 
3501 nxge_status_t
3502 nxge_intr_mask_mgmt_set(p_nxge_t nxgep, boolean_t on)
3503 {
3504 	p_nxge_ldgv_t ldgvp;
3505 	p_nxge_ldg_t ldgp;
3506 	p_nxge_ldv_t ldvp;
3507 	npi_handle_t handle;
3508 	int i, j;
3509 	npi_status_t rs = NPI_SUCCESS;
3510 
3511 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3512 	    "==> nxge_intr_mask_mgmt_set (%d)", on));
3513 
3514 	if (nxgep->niu_type == N2_NIU) {
3515 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3516 		    "<== nxge_intr_mask_mgmt_set (%d) not set (N2/NIU)",
3517 		    on));
3518 		return (NXGE_ERROR);
3519 	}
3520 
3521 	if ((ldgvp = nxgep->ldgvp) == NULL) {
3522 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3523 		    "==> nxge_intr_mask_mgmt_set: Null ldgvp"));
3524 		return (NXGE_ERROR);
3525 	}
3526 
3527 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
3528 	ldgp = ldgvp->ldgp;
3529 	ldvp = ldgvp->ldvp;
3530 	if (ldgp == NULL || ldvp == NULL) {
3531 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3532 		    "<== nxge_intr_mask_mgmt_set: Null ldgp or ldvp"));
3533 		return (NXGE_ERROR);
3534 	}
3535 	/* set masks. */
3536 	for (i = 0; i < ldgvp->ldg_intrs; i++, ldgp++) {
3537 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3538 		    "==> nxge_intr_mask_mgmt_set: flag %d ldg %d"
3539 		    "set mask nldvs %d", on, ldgp->ldg, ldgp->nldvs));
3540 		for (j = 0; j < ldgp->nldvs; j++, ldvp++) {
3541 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3542 			    "==> nxge_intr_mask_mgmt_set: "
3543 			    "for %d %d flag %d", i, j, on));
3544 			if (on) {
3545 				ldvp->ldv_ldf_masks = 0;
3546 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3547 				    "==> nxge_intr_mask_mgmt_set: "
3548 				    "ON mask off"));
3549 			} else if (!on) {
3550 				ldvp->ldv_ldf_masks = (uint8_t)LD_IM1_MASK;
3551 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3552 				    "==> nxge_intr_mask_mgmt_set:mask on"));
3553 			}
3554 			rs = npi_intr_mask_set(handle, ldvp->ldv,
3555 			    ldvp->ldv_ldf_masks);
3556 			if (rs != NPI_SUCCESS) {
3557 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3558 				    "==> nxge_intr_mask_mgmt_set: "
3559 				    "set mask failed "
3560 				    " rs 0x%x ldv %d mask 0x%x",
3561 				    rs, ldvp->ldv, ldvp->ldv_ldf_masks));
3562 				return (NXGE_ERROR | rs);
3563 			}
3564 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3565 			    "==> nxge_intr_mask_mgmt_set: flag %d"
3566 			    "set mask OK "
3567 			    " ldv %d mask 0x%x",
3568 			    on, ldvp->ldv, ldvp->ldv_ldf_masks));
3569 		}
3570 	}
3571 
3572 	ldgp = ldgvp->ldgp;
3573 	/* set the arm bit */
3574 	for (i = 0; i < nxgep->ldgvp->ldg_intrs; i++, ldgp++) {
3575 		if (on && !ldgp->arm) {
3576 			ldgp->arm = B_TRUE;
3577 		} else if (!on && ldgp->arm) {
3578 			ldgp->arm = B_FALSE;
3579 		}
3580 		rs = npi_intr_ldg_mgmt_set(handle, ldgp->ldg,
3581 		    ldgp->arm, ldgp->ldg_timer);
3582 		if (rs != NPI_SUCCESS) {
3583 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3584 			    "<== nxge_intr_mask_mgmt_set: "
3585 			    "set timer failed "
3586 			    " rs 0x%x ldg %d timer 0x%x",
3587 			    rs, ldgp->ldg, ldgp->ldg_timer));
3588 			return (NXGE_ERROR | rs);
3589 		}
3590 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3591 		    "==> nxge_intr_mask_mgmt_set: OK (flag %d) "
3592 		    "set timer "
3593 		    " ldg %d timer 0x%x",
3594 		    on, ldgp->ldg, ldgp->ldg_timer));
3595 	}
3596 
3597 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_intr_mask_mgmt_set"));
3598 	return (NXGE_OK);
3599 }
3600 
3601 static nxge_status_t
3602 nxge_get_mac_addr_properties(p_nxge_t nxgep)
3603 {
3604 #if defined(_BIG_ENDIAN)
3605 	uchar_t *prop_val;
3606 	uint_t prop_len;
3607 	uint_t j;
3608 #endif
3609 	uint_t i;
3610 	uint8_t func_num;
3611 	boolean_t compute_macs = B_TRUE;
3612 
3613 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "==> nxge_get_mac_addr_properties "));
3614 
3615 #if defined(_BIG_ENDIAN)
3616 	/*
3617 	 * Get the ethernet address.
3618 	 */
3619 	(void) localetheraddr((struct ether_addr *)NULL, &nxgep->ouraddr);
3620 
3621 	/*
3622 	 * Check if it is an adapter with its own local mac address If it is
3623 	 * present, override the system mac address.
3624 	 */
3625 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3626 	    "local-mac-address", &prop_val,
3627 	    &prop_len) == DDI_PROP_SUCCESS) {
3628 		if (prop_len == ETHERADDRL) {
3629 			nxgep->factaddr = *(p_ether_addr_t)prop_val;
3630 			NXGE_DEBUG_MSG((nxgep, DDI_CTL, "Local mac address = "
3631 			    "%02x:%02x:%02x:%02x:%02x:%02x",
3632 			    prop_val[0], prop_val[1], prop_val[2],
3633 			    prop_val[3], prop_val[4], prop_val[5]));
3634 		}
3635 		ddi_prop_free(prop_val);
3636 	}
3637 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3638 	    "local-mac-address?", &prop_val,
3639 	    &prop_len) == DDI_PROP_SUCCESS) {
3640 		if (strncmp("true", (caddr_t)prop_val, (size_t)prop_len) == 0) {
3641 			nxgep->ouraddr = nxgep->factaddr;
3642 			NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3643 			    "Using local MAC address"));
3644 		}
3645 		ddi_prop_free(prop_val);
3646 	} else {
3647 		nxgep->ouraddr = nxgep->factaddr;
3648 	}
3649 
3650 	if ((!nxgep->vpd_info.present) ||
3651 	    (nxge_is_valid_local_mac(nxgep->factaddr)))
3652 		goto got_mac_addr;
3653 
3654 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "nxge_get_mac_addr_properties: "
3655 	    "MAC address from properties is not valid...reading from PROM"));
3656 
3657 #endif
3658 	if (!nxgep->vpd_info.ver_valid) {
3659 		(void) nxge_espc_mac_addrs_get(nxgep);
3660 		if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3661 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "Failed to get "
3662 			    "MAC address"));
3663 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "EEPROM version "
3664 			    "[%s] invalid...please update",
3665 			    nxgep->vpd_info.ver));
3666 			return (NXGE_ERROR);
3667 		}
3668 		nxgep->ouraddr = nxgep->factaddr;
3669 		goto got_mac_addr;
3670 	}
3671 	/*
3672 	 * First get the MAC address from the info in the VPD data read
3673 	 * from the EEPROM.
3674 	 */
3675 	nxge_espc_get_next_mac_addr(nxgep->vpd_info.mac_addr,
3676 	    nxgep->function_num, &nxgep->factaddr);
3677 
3678 	if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3679 		NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3680 		    "nxge_get_mac_addr_properties: "
3681 		    "MAC address in EEPROM VPD data not valid"
3682 		    "...reading from NCR registers"));
3683 		(void) nxge_espc_mac_addrs_get(nxgep);
3684 		if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3685 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "Failed to get "
3686 			    "MAC address"));
3687 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "EEPROM version "
3688 			    "[%s] invalid...please update",
3689 			    nxgep->vpd_info.ver));
3690 			return (NXGE_ERROR);
3691 		}
3692 	}
3693 
3694 	nxgep->ouraddr = nxgep->factaddr;
3695 
3696 got_mac_addr:
3697 	func_num = nxgep->function_num;
3698 
3699 	/*
3700 	 * Note: mac-addresses property is the list of mac addresses for a
3701 	 * port. NXGE_MAX_MMAC_ADDRS is the total number of MAC addresses
3702 	 * allocated for a board.
3703 	 */
3704 	nxgep->nxge_mmac_info.total_factory_macs = NXGE_MAX_MMAC_ADDRS;
3705 
3706 #if defined(_BIG_ENDIAN)
3707 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3708 	    "mac-addresses", &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
3709 		/*
3710 		 * XAUI may have up to 18 MACs, more than the XMAC can
3711 		 * use (1 unique MAC plus 16 alternate MACs)
3712 		 */
3713 		nxgep->nxge_mmac_info.num_factory_mmac =
3714 		    prop_len / ETHERADDRL - 1;
3715 		if (nxgep->nxge_mmac_info.num_factory_mmac >
3716 		    XMAC_MAX_ALT_ADDR_ENTRY) {
3717 			nxgep->nxge_mmac_info.num_factory_mmac =
3718 			    XMAC_MAX_ALT_ADDR_ENTRY;
3719 		}
3720 
3721 		for (i = 1; i <= nxgep->nxge_mmac_info.num_factory_mmac; i++) {
3722 			for (j = 0; j < ETHERADDRL; j++) {
3723 				nxgep->nxge_mmac_info.factory_mac_pool[i][j] =
3724 				    *(prop_val + (i * ETHERADDRL) + j);
3725 			}
3726 			NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3727 			    "nxge_get_mac_addr_properties: Alt mac[%d] from "
3728 			    "mac-addresses property[%2x:%2x:%2x:%2x:%2x:%2x]",
3729 			    i, nxgep->nxge_mmac_info.factory_mac_pool[i][0],
3730 			    nxgep->nxge_mmac_info.factory_mac_pool[i][1],
3731 			    nxgep->nxge_mmac_info.factory_mac_pool[i][2],
3732 			    nxgep->nxge_mmac_info.factory_mac_pool[i][3],
3733 			    nxgep->nxge_mmac_info.factory_mac_pool[i][4],
3734 			    nxgep->nxge_mmac_info.factory_mac_pool[i][5]));
3735 		}
3736 
3737 		compute_macs = B_FALSE;
3738 		ddi_prop_free(prop_val);
3739 		goto got_mmac_info;
3740 	}
3741 #endif
3742 	/*
3743 	 * total_factory_macs = 32
3744 	 * num_factory_mmac = (32 >> (nports/2)) - 1
3745 	 * So if nports = 4, then num_factory_mmac =  7
3746 	 *    if nports = 2, then num_factory_mmac = 15
3747 	 */
3748 	nxgep->nxge_mmac_info.num_factory_mmac =
3749 	    ((nxgep->nxge_mmac_info.total_factory_macs >>
3750 	    (nxgep->nports >> 1))) - 1;
3751 
3752 got_mmac_info:
3753 
3754 	if ((nxgep->function_num < 2) &&
3755 	    (nxgep->nxge_mmac_info.num_factory_mmac >
3756 	    XMAC_MAX_ALT_ADDR_ENTRY)) {
3757 		nxgep->nxge_mmac_info.num_factory_mmac =
3758 		    XMAC_MAX_ALT_ADDR_ENTRY;
3759 	} else if ((nxgep->function_num > 1) &&
3760 	    (nxgep->nxge_mmac_info.num_factory_mmac >
3761 	    BMAC_MAX_ALT_ADDR_ENTRY)) {
3762 		nxgep->nxge_mmac_info.num_factory_mmac =
3763 		    BMAC_MAX_ALT_ADDR_ENTRY;
3764 	}
3765 
3766 	for (i = 0; i <= nxgep->nxge_mmac_info.num_mmac; i++) {
3767 		(void) npi_mac_altaddr_disable(nxgep->npi_handle,
3768 		    NXGE_GET_PORT_NUM(func_num), i);
3769 	}
3770 
3771 	(void) nxge_init_mmac(nxgep, compute_macs);
3772 	return (NXGE_OK);
3773 }
3774 
3775 void
3776 nxge_get_xcvr_properties(p_nxge_t nxgep)
3777 {
3778 	uchar_t *prop_val;
3779 	uint_t prop_len;
3780 
3781 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "==> nxge_get_xcvr_properties"));
3782 
3783 	/*
3784 	 * Read the type of physical layer interface being used.
3785 	 */
3786 	nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3787 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3788 	    "phy-type", &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
3789 		if (strncmp("pcs", (caddr_t)prop_val,
3790 		    (size_t)prop_len) == 0) {
3791 			nxgep->statsp->mac_stats.xcvr_inuse = PCS_XCVR;
3792 		} else {
3793 			nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3794 		}
3795 		ddi_prop_free(prop_val);
3796 	} else if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3797 	    "phy-interface", &prop_val,
3798 	    &prop_len) == DDI_PROP_SUCCESS) {
3799 		if (strncmp("pcs", (caddr_t)prop_val, (size_t)prop_len) == 0) {
3800 			nxgep->statsp->mac_stats.xcvr_inuse = PCS_XCVR;
3801 		} else {
3802 			nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3803 		}
3804 		ddi_prop_free(prop_val);
3805 	}
3806 }
3807 
3808 /*
3809  * Static functions start here.
3810  */
3811 
3812 static void
3813 nxge_ldgv_setup(p_nxge_ldg_t *ldgp, p_nxge_ldv_t *ldvp, uint8_t ldv,
3814 	uint8_t endldg, int *ngrps)
3815 {
3816 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup"));
3817 	/* Assign the group number for each device. */
3818 	(*ldvp)->ldg_assigned = (*ldgp)->ldg;
3819 	(*ldvp)->ldgp = *ldgp;
3820 	(*ldvp)->ldv = ldv;
3821 
3822 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup: "
3823 	    "ldv %d endldg %d ldg %d, ldvp $%p",
3824 	    ldv, endldg, (*ldgp)->ldg, (*ldgp)->ldvp));
3825 
3826 	(*ldgp)->nldvs++;
3827 	if ((*ldgp)->ldg == (endldg - 1)) {
3828 		if ((*ldgp)->ldvp == NULL) {
3829 			(*ldgp)->ldvp = *ldvp;
3830 			*ngrps += 1;
3831 			NXGE_DEBUG_MSG((NULL, INT_CTL,
3832 			    "==> nxge_ldgv_setup: ngrps %d", *ngrps));
3833 		}
3834 		NXGE_DEBUG_MSG((NULL, INT_CTL,
3835 		    "==> nxge_ldgv_setup: ldvp $%p ngrps %d",
3836 		    *ldvp, *ngrps));
3837 		++*ldvp;
3838 	} else {
3839 		(*ldgp)->ldvp = *ldvp;
3840 		*ngrps += 1;
3841 		NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup(done): "
3842 		    "ldv %d endldg %d ldg %d, ldvp $%p",
3843 		    ldv, endldg, (*ldgp)->ldg, (*ldgp)->ldvp));
3844 		(*ldvp) = ++*ldvp;
3845 		(*ldgp) = ++*ldgp;
3846 		NXGE_DEBUG_MSG((NULL, INT_CTL,
3847 		    "==> nxge_ldgv_setup: new ngrps %d", *ngrps));
3848 	}
3849 
3850 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup: "
3851 	    "ldv %d ldvp $%p endldg %d ngrps %d",
3852 	    ldv, ldvp, endldg, *ngrps));
3853 
3854 	NXGE_DEBUG_MSG((NULL, INT_CTL, "<== nxge_ldgv_setup"));
3855 }
3856 
3857 /*
3858  * Note: This function assumes the following distribution of mac
3859  * addresses among 4 ports in neptune:
3860  *
3861  *      -------------
3862  *    0|            |0 - local-mac-address for fn 0
3863  *      -------------
3864  *    1|            |1 - local-mac-address for fn 1
3865  *      -------------
3866  *    2|            |2 - local-mac-address for fn 2
3867  *      -------------
3868  *    3|            |3 - local-mac-address for fn 3
3869  *      -------------
3870  *     |            |4 - Start of alt. mac addr. for fn 0
3871  *     |            |
3872  *     |            |
3873  *     |            |10
3874  *     --------------
3875  *     |            |11 - Start of alt. mac addr. for fn 1
3876  *     |            |
3877  *     |            |
3878  *     |            |17
3879  *     --------------
3880  *     |            |18 - Start of alt. mac addr. for fn 2
3881  *     |            |
3882  *     |            |
3883  *     |            |24
3884  *     --------------
3885  *     |            |25 - Start of alt. mac addr. for fn 3
3886  *     |            |
3887  *     |            |
3888  *     |            |31
3889  *     --------------
3890  *
3891  * For N2/NIU the mac addresses is from XAUI card.
3892  *
3893  * When 'compute_addrs' is true, the alternate mac addresses are computed
3894  * using the unique mac address as base. Otherwise the alternate addresses
3895  * are assigned from the list read off the 'mac-addresses' property.
3896  */
3897 
3898 static void
3899 nxge_init_mmac(p_nxge_t nxgep, boolean_t compute_addrs)
3900 {
3901 	int slot;
3902 	uint8_t func_num;
3903 	uint16_t *base_mmac_addr;
3904 	uint32_t alt_mac_ls4b;
3905 	uint16_t *mmac_addr;
3906 	uint32_t base_mac_ls4b; /* least significant 4 bytes */
3907 	nxge_mmac_t *mmac_info;
3908 	npi_mac_addr_t mac_addr;
3909 
3910 	func_num = nxgep->function_num;
3911 	base_mmac_addr = (uint16_t *)&nxgep->factaddr;
3912 	mmac_info = (nxge_mmac_t *)&nxgep->nxge_mmac_info;
3913 
3914 	if (compute_addrs) {
3915 		base_mac_ls4b = ((uint32_t)base_mmac_addr[1]) << 16 |
3916 		    base_mmac_addr[2];
3917 
3918 		if (nxgep->niu_type == N2_NIU) {
3919 			/* ls4b of 1st altmac */
3920 			alt_mac_ls4b = base_mac_ls4b + 1;
3921 		} else {			/* Neptune */
3922 			alt_mac_ls4b = base_mac_ls4b +
3923 			    (nxgep->nports - func_num) +
3924 			    (func_num * (mmac_info->num_factory_mmac));
3925 		}
3926 	}
3927 
3928 	/* Set flags for unique MAC */
3929 	mmac_info->mac_pool[0].flags |= MMAC_SLOT_USED | MMAC_VENDOR_ADDR;
3930 
3931 	/* Clear flags of all alternate MAC slots */
3932 	for (slot = 1; slot <= mmac_info->num_mmac; slot++) {
3933 		if (slot <= mmac_info->num_factory_mmac)
3934 			mmac_info->mac_pool[slot].flags = MMAC_VENDOR_ADDR;
3935 		else
3936 			mmac_info->mac_pool[slot].flags = 0;
3937 	}
3938 
3939 	/* Generate and store factory alternate MACs */
3940 	for (slot = 1; slot <= mmac_info->num_factory_mmac; slot++) {
3941 		mmac_addr = (uint16_t *)&mmac_info->factory_mac_pool[slot];
3942 		if (compute_addrs) {
3943 			mmac_addr[0] = base_mmac_addr[0];
3944 			mac_addr.w2 = mmac_addr[0];
3945 
3946 			mmac_addr[1] = (alt_mac_ls4b >> 16) & 0x0FFFF;
3947 			mac_addr.w1 = mmac_addr[1];
3948 
3949 			mmac_addr[2] = alt_mac_ls4b & 0x0FFFF;
3950 			mac_addr.w0 = mmac_addr[2];
3951 
3952 			alt_mac_ls4b++;
3953 		} else {
3954 			mac_addr.w2 = mmac_addr[0];
3955 			mac_addr.w1 = mmac_addr[1];
3956 			mac_addr.w0 = mmac_addr[2];
3957 		}
3958 
3959 		NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3960 		    "mac_pool_addr[%2x:%2x:%2x:%2x:%2x:%2x] npi_addr[%x%x%x]",
3961 		    mmac_info->factory_mac_pool[slot][0],
3962 		    mmac_info->factory_mac_pool[slot][1],
3963 		    mmac_info->factory_mac_pool[slot][2],
3964 		    mmac_info->factory_mac_pool[slot][3],
3965 		    mmac_info->factory_mac_pool[slot][4],
3966 		    mmac_info->factory_mac_pool[slot][5],
3967 		    mac_addr.w0, mac_addr.w1, mac_addr.w2));
3968 		/*
3969 		 * slot minus 1 because npi_mac_altaddr_entry expects 0
3970 		 * for the first alternate mac address.
3971 		 */
3972 		(void) npi_mac_altaddr_entry(nxgep->npi_handle, OP_SET,
3973 		    NXGE_GET_PORT_NUM(func_num), slot - 1, &mac_addr);
3974 	}
3975 	/* Initialize the first two parameters for mmac kstat */
3976 	nxgep->statsp->mmac_stats.mmac_max_cnt = mmac_info->num_mmac;
3977 	nxgep->statsp->mmac_stats.mmac_avail_cnt = mmac_info->num_mmac;
3978 }
3979 
3980 /*
3981  * Convert an RDC group index into a port ring index.  That is, map
3982  * <groupid> to an index into nxgep->rx_ring_handles.
3983  * (group ring index -> port ring index)
3984  */
3985 int
3986 nxge_get_rxring_index(p_nxge_t nxgep, int groupid, int ringidx)
3987 {
3988 	int			i;
3989 	int			index = 0;
3990 	p_nxge_rdc_grp_t	rdc_grp_p;
3991 	p_nxge_dma_pt_cfg_t	p_dma_cfgp;
3992 	p_nxge_hw_pt_cfg_t	p_cfgp;
3993 
3994 	p_dma_cfgp = &nxgep->pt_config;
3995 	p_cfgp = &p_dma_cfgp->hw_config;
3996 
3997 	for (i = 0; i < groupid; i++) {
3998 		rdc_grp_p =
3999 		    &p_dma_cfgp->rdc_grps[p_cfgp->def_mac_rxdma_grpid + i];
4000 		index += rdc_grp_p->max_rdcs;
4001 	}
4002 
4003 	return (index + ringidx);
4004 }
4005