xref: /titanic_41/usr/src/uts/common/io/dmfe/dmfe.h (revision ed5289f91b9bf164dccd6c75398362be77a4478d)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #ifndef _SYS_DMFE_H
27 #define	_SYS_DMFE_H
28 
29 #pragma ident	"%Z%%M%	%I%	%E% SMI"
30 
31 #ifdef __cplusplus
32 extern "C" {
33 #endif
34 
35 /* Chip ID */
36 #define	DAVICOM_VENDOR_ID	0x1282
37 #define	DEVICE_ID_9100		0x9100
38 #define	DEVICE_ID_9132		0x9132
39 /* The 9102 and 9102A are distinguished by revision ID */
40 #define	DEVICE_ID_9102		0x9102
41 #define	DEVICE_ID_9102A		0x9102
42 
43 /* Streams */
44 #define	DMFEHIWAT		32768	/* driver flow control high water */
45 #define	DMFELOWAT		4096	/* driver flow control low water */
46 #define	DMFEIDNUM		0	/* DMFE Id; zero works */
47 
48 /* Size/count parameters */
49 #define	SROM_SIZE		128
50 #define	SETUPBUF_SIZE		192	/* Setup buffer size in bytes */
51 #define	MCASTBUF_SIZE		512	/* multicast hash table size in bits */
52 #define	HASH_POLY		0x04C11DB6
53 #define	HASH_CRC		0xFFFFFFFFU
54 #define	SETUPBUF_PHYS		39	/* word offset of station physical */
55 					/* address within setup buffer */
56 
57 
58 /*
59  * Tx/Rx descriptor ring entry formats
60  *
61  * These structures are not actually used; they are just here to show
62  * the layout of the descriptor entries used by the DMFE chip hardware
63  * (we do use "sizeof" these structures).  The code uses the #defined
64  * offsets below to access the various members of the descriptors, via
65  * the DDI access functions (remember the DMFE h/w is little-endian).
66  */
67 
68 struct rx_desc_type {
69 	uint32_t	desc0;
70 	uint32_t	desc1;
71 	uint32_t	buffer1;
72 	uint32_t	rd_next;
73 };
74 
75 struct tx_desc_type {
76 	uint32_t	desc0;
77 	uint32_t	desc1;
78 	uint32_t	buffer1;
79 	uint32_t	td_next;
80 };
81 
82 /*
83  * Offsets & sizes for tx/rx descriptors, expressed in (d)words
84  */
85 #define	DESC0			0
86 #define	DESC1			1
87 #define	BUFFER1			2
88 #define	RD_NEXT			3
89 #define	TD_NEXT			3
90 #define	DESC_SIZE		4
91 
92 /*
93  * Receive descriptor description
94  */
95 /* desc0 bit definitions */
96 #define	RX_OVERFLOW		(1UL<<0)
97 #define	RX_CRC			(1UL<<1)
98 #define	RX_DRIBBLING		(1UL<<2)
99 #define	RX_MII_ERR		(1UL<<3)
100 #define	RX_RCV_WD_TO		(1UL<<4)
101 #define	RX_FRAME_TYPE		(1UL<<5)
102 #define	RX_COLLISION		(1UL<<6)
103 #define	RX_FRAME2LONG		(1UL<<7)
104 #define	RX_LAST_DESC		(1UL<<8)
105 #define	RX_FIRST_DESC		(1UL<<9)
106 #define	RX_MULTI_FRAME		(1UL<<10)
107 #define	RX_RUNT_FRAME		(1UL<<11)
108 #define	RX_LOOP_MODE		(3UL<<12)
109 #define	RX_DESC_ERR		(1UL<<14)
110 #define	RX_ERR_SUMMARY		(1UL<<15)
111 #define	RX_FRAME_LEN		(0x3fffUL<<16)
112 #define	RX_FILTER_FAIL		(1UL<<30)
113 #define	RX_OWN			(1UL<<31)
114 
115 /* desc1 bit definitions */
116 #define	RX_BUFFER_SIZE		(0x7ff)
117 #define	RX_CHAINING		(1UL<<24)
118 #define	RX_END_OF_RING		(1UL<<25)
119 
120 /*
121  * Transmit descriptor description
122  */
123 /* desc0 bit definitions */
124 #define	TX_DEFERRED		(1UL<<0)
125 #define	TX_UNDERFLOW		(1UL<<1)
126 #define	TX_LINK_FAIL		(1UL<<2)
127 #define	TX_COLL_COUNT		(0xfUL<<3)
128 #define	TX_HEARTBEAT_FAIL	(1UL<<7)
129 #define	TX_EXCESS_COLL		(1UL<<8)
130 #define	TX_LATE_COLL		(1UL<<9)
131 #define	TX_NO_CARRIER		(1UL<<10)
132 #define	TX_CARRIER_LOSS		(1UL<<11)
133 #define	TX_JABBER_TO		(1UL<<14)
134 #define	TX_ERR_SUMMARY		(1UL<<15)
135 #define	TX_SPARE		(0x7fffUL<<16)
136 #define	TX_OWN			(1UL<<31)
137 
138 /* desc1 bit definitions */
139 #define	TX_BUFFER_SIZE1		(0x7ffUL<<0)
140 #define	TX_BUFFER_SIZE2		(0x7ffUL<<11)
141 #define	TX_FILTER_TYPE0		(1UL<<22)
142 #define	TX_DISABLE_PAD		(1UL<<23)
143 #define	TX_CHAINING		(1UL<<24)
144 #define	TX_END_OF_RING		(1UL<<25)
145 #define	TX_CRC_DISABLE		(1UL<<26)
146 #define	TX_SETUP_PACKET		(1UL<<27)
147 #define	TX_FILTER_TYPE1		(1UL<<28)
148 #define	TX_FIRST_DESC		(1UL<<29)
149 #define	TX_LAST_DESC		(1UL<<30)
150 #define	TX_INT_ON_COMP		(1UL<<31)
151 
152 
153 /* Device-defined PCI config space registers */
154 #define	PCI_DMFE_CONF_CFDD	0x40
155 #define	CFDD_SNOOZE		(1UL<<30)
156 #define	CFDD_SLEEP		(1UL<<31)
157 
158 
159 /* Operating registers in I/O or MEMORY space */
160 #define	BUS_MODE_REG		0x00
161 #define	TX_POLL_REG		0x08
162 #define	RX_POLL_REG		0x10
163 #define	RX_BASE_ADDR_REG	0x18
164 #define	TX_BASE_ADDR_REG	0x20
165 #define	STATUS_REG		0x28
166 #define	OPN_MODE_REG		0x30
167 #define	INT_MASK_REG		0x38
168 #define	MISSED_FRAME_REG	0x40
169 #define	ETHER_ROM_REG		0x48
170 #define	BOOT_ROM_REG		0x50
171 #define	GP_TIMER_REG		0x58
172 #define	PHY_STATUS_REG		0x60
173 #define	FRAME_ACCESS_REG	0x68
174 #define	FRAME_DATA_REG		0x70
175 #define	W_J_TIMER_REG		0x78
176 
177 
178 /* Bit descriptions of CSR registers */
179 
180 /* BUS_MODE_REG, CSR0 */
181 #define	SW_RESET		0x00000001
182 #define	BURST_SIZE		0		/* unlimited burst length */
183 #define	CACHE_ALIGN		(3 << 14)	/* 32 Dwords		*/
184 #define	TX_POLL_INTVL		(1 << 17)	/* 200us polling	*/
185 #define	READ_MULTIPLE		(1 << 21) 	/* use Memory Read	*/
186 						/* Multiple PCI cycles	*/
187 
188 /* STATUS_REG, CSR5 */
189 #define	TX_PKTDONE_INT		0x00000001UL
190 #define	TX_STOPPED_INT		0x00000002UL
191 #define	TX_ALLDONE_INT		0x00000004UL
192 #define	TX_JABBER_INT		0x00000008UL
193 #define	TX_RESERVED_INT		0x00000010UL
194 #define	TX_UNDERFLOW_INT	0x00000020UL
195 
196 #define	RX_PKTDONE_INT		0x00000040UL
197 #define	RX_UNAVAIL_INT		0x00000080UL
198 #define	RX_STOPPED_INT		0x00000100UL
199 #define	RX_WATCHDOG_INT		0x00000200UL
200 
201 #define	TX_EARLY_INT		0x00000400UL
202 #define	GP_TIMER_INT		0x00000800UL
203 #define	LINK_STATUS_INT		0x00001000UL
204 #define	SYSTEM_ERR_INT		0x00002000UL
205 #define	RX_EARLY_INT		0x00004000UL
206 
207 #define	ABNORMAL_SUMMARY_INT	0x00008000UL
208 #define	NORMAL_SUMMARY_INT	0x00010000UL
209 #define	INT_STATUS_MASK		0x0001ffffUL
210 
211 #define	RX_PROCESS_STOPPED	0x00000000UL
212 #define	RX_PROCESS_FETCH_DESC	0x00020000UL
213 #define	RX_PROCESS_WAIT_PKT	0x00040000UL
214 #define	RX_PROCESS_STORE_DATA	0x00060000UL
215 #define	RX_PROCESS_CLOSE_OWNER	0x00080000UL
216 #define	RX_PROCESS_CLOSE_STATUS	0x000a0000UL
217 #define	RX_PROCESS_SUSPEND	0x000c0000UL
218 #define	RX_PROCESS_PURGE	0x000e0000UL
219 #define	RX_PROCESS_STATE_MASK	0x000e0000UL
220 #define	TX_PROCESS_STOPPED	0x00000000UL
221 #define	TX_PROCESS_FETCH_DESC	0x00100000UL
222 #define	TX_PROCESS_FETCH_SETUP	0x00200000UL
223 #define	TX_PROCESS_FETCH_DATA	0x00300000UL
224 #define	TX_PROCESS_CLOSE_OWNER	0x00400000UL
225 #define	TX_PROCESS_WAIT_END	0x00500000UL
226 #define	TX_PROCESS_CLOSE_STATUS	0x00600000UL
227 #define	TX_PROCESS_SUSPEND	0x00700000UL
228 #define	TX_PROCESS_STATE_MASK	0x00700000UL
229 #define	SYSTEM_ERR_BITS		0x03800000UL
230 #define	SYSTEM_ERR_PARITY	0x00000000UL
231 #define	SYSTEM_ERR_M_ABORT	0x00800000UL
232 #define	SYSTEM_ERR_T_ABORT	0x01000000UL
233 
234 #define	RX_PROCESS_STATE(csr5)	(((csr5) & RX_PROCESS_STATE_MASK) >> 17)
235 #define	RX_PROCESS_MAX_STATE	7
236 #define	TX_PROCESS_STATE(csr5)	(((csr5) & TX_PROCESS_STATE_MASK) >> 20)
237 #define	TX_PROCESS_MAX_STATE	7
238 
239 /* OPN_REG , CSR6 */
240 #define	HASH_FILTERING		(1UL<<0)
241 #define	START_RECEIVE		(1UL<<1)
242 #define	HASH_ONLY		(1UL<<2)
243 #define	PASSBAD			(1UL<<3)
244 #define	INV_FILTER		(1UL<<4)
245 #define	PROMISC_MODE		(1UL<<6)
246 #define	PASS_MULTICAST		(1UL<<7)
247 #define	FULL_DUPLEX		(1UL<<9)
248 #define	LOOPBACK_OFF		(0UL<<10)
249 #define	LOOPBACK_INTERNAL	(1UL<<10)
250 #define	LOOPBACK_PHY_D		(2UL<<10)
251 #define	LOOPBACK_PHY_A		(3UL<<10)
252 #define	LOOPBACK_MODE_MASK	(3UL<<10)
253 #define	FORCE_COLLISION		(1UL<<12)
254 #define	START_TRANSMIT 		(1UL<<13)
255 #define	TX_THRESHOLD_LOW	(0UL<<14)
256 #define	TX_THRESHOLD_MID	(1UL<<14)
257 #define	TX_THRESHOLD_HI		(2UL<<14)
258 #define	TX_THRESHOLD_MASK	(3UL<<14)
259 #define	ONE_PKT_MODE		(1UL<<16)
260 #define	EXT_MII_IF		(1UL<<18)
261 #define	START_TX_IMMED		(1UL<<20)
262 #define	STORE_AND_FORWARD	(1UL<<21)
263 #define	TX_THRESHOLD_MODE	(1UL<<22)
264 #define	OPN_25_MB1		(1UL<<25)
265 #define	NO_RX_PURGE		(1UL<<29)
266 #define	RECEIVEALL		(1UL<<30)
267 
268 /* INT_MASK_REG , CSR7 */
269 /*
270  * Use the values defined for the INT_STATUS_MASK bits (0..16)
271  * of CSR5.  The remaining bits (17..31) are not used.
272  */
273 
274 /* MISSED_FRAME_REG, CSR8 */
275 #define	MISSED_FRAME_MASK	0x00000ffffUL
276 #define	MISSED_OVERFLOW		0x000010000UL
277 #define	PURGED_PACKET_MASK	0x07ffe0000UL
278 #define	PURGED_OVERFLOW		0x080000000UL
279 
280 /* Serial ROM/MII Register CSR9 */
281 #define	SEL_CHIP		0x00000001UL
282 #define	SEL_CLK			0x00000002UL
283 #define	DATA_IN			0x00000004UL
284 #define	DATA_OUT		0x00000008UL
285 #define	SER_8_MB1		0x00000300UL
286 #define	SEL_XRS			0x00000400UL
287 #define	SEL_EEPROM		0x00000800UL
288 #define	SEL_BOOTROM		0x00001000UL
289 #define	WRITE_OP		0x00002000UL
290 #define	READ_OP			0x00004000UL
291 #define	SER_15_MB1		0x00008000UL
292 #define	READ_EEPROM		(READ_OP | SEL_EEPROM)
293 #define	READ_EEPROM_CS		(READ_OP | SEL_EEPROM | SEL_CHIP)
294 
295 #define	MII_CLOCK		0x00010000UL
296 #define	MII_DATA_OUT		0x00020000UL
297 #define	MII_DATA_OUT_SHIFT	17
298 #define	MII_READ		0x00040000UL
299 #define	MII_TRISTATE		0x00040000UL
300 #define	MII_WRITE		0x00000000UL
301 #define	MII_DATA_IN		0x00080000UL
302 #define	MII_DATA_IN_SHIFT	19
303 
304 #define	RELOAD_EEPROM		0x00100000UL
305 #define	LOADED_EEPROM		0x00200000UL
306 
307 /* GPR Timer reg, CSR11 */
308 #define	GPTIMER_CONT		(1UL<<16)
309 
310 /* PHY Status reg, CSR12 */
311 #define	GPS_LINK_10		0x00000001UL
312 #define	GPS_LINK_100		0x00000002UL
313 #define	GPS_FULL_DUPLEX		0x00000004UL
314 #define	GPS_LINK_STATUS		0x00000008UL
315 #define	GPS_RX_LOCK		0x00000010UL
316 #define	GPS_SIGNAL_DETECT	0x00000020UL
317 #define	GPS_UTP_SIG		0x00000040UL
318 #define	GPS_PHY_RESET		0x00000080UL
319 #define	GPS_WRITE_ENABLE	0x00000100UL
320 
321 /* Sample Frame Access reg, CSR13 */
322 #define	TX_FIFO_ACCESS		(0x32<<3)
323 #define	RX_FIFO_ACCESS		(0x35<<3)
324 #define	DIAG_RESET		(0x38<<3)
325 
326 /* Sample Frame Data reg, CSR14, when CSR13 is set to DIAG_RESET */
327 #define	DIAG_TX_FIFO_WRITE_0	0x00000001UL
328 #define	DIAG_TX_FIFO_READ_0	0x00000002UL
329 #define	DIAG_RX_FIFO_WRITE_0	0x00000004UL
330 #define	DIAG_RX_FIFO_READ_0	0x00000008UL
331 #define	DIAG_TX_FIFO_WRITE_100	0x00000020UL
332 #define	DIAG_RX_FIFO_WRITE_100	0x00000040UL
333 
334 /* CSR15 */
335 #define	TX_JABBER_DISABLE	0x00000001UL
336 #define	UNJABBER_INTERVAL	0x00000002UL
337 #define	JABBER_CLOCK		0x00000004UL
338 #define	WD_TIMER_DISABLE	0x00000010UL
339 #define	WD_TIMER_RELEASE	0x00000020UL
340 #define	VLAN_ENABLE		0x00000040UL
341 #define	PAUSE_STATUS_1		0x00000080UL
342 #define	PAUSE_STATUS_2		0x00000200UL
343 #define	FLOW_CONTROL		0x00000400UL
344 #define	PAUSE_ENABLE_1		0x00000800UL
345 #define	PAUSE_ENABLE_2		0x00001000UL
346 #define	PAUSE_TX_FFFF		0x00002000UL
347 #define	PAUSE_TX_0000		0x00004000UL
348 #define	PAUSE_CONDITION		0x00008000UL
349 #define	RX_FIFO_THRES_MASK	0x003f0000UL
350 #define	RX_EARLY_THRES_MASK	0x01c00000UL
351 
352 
353 /* SROM access definitions */
354 #define	HIGH_ADDRESS_BIT	0x20			/* 6 bits */
355 #define	HIGH_CMD_BIT		0x4			/* 3 bits */
356 #define	HIGH_DATA_BIT		0x8000			/* 16 bits */
357 #define	SROM_DELAY		5			/* 5 microseconds */
358 #define	EEPROM_READ_CMD		6
359 #define	EEPROM_EN_ADDR		20
360 
361 /* MII access definitions */
362 #define	MII_REG_ADDR_SHIFT	18
363 #define	MII_PHY_ADDR_SHIFT	23
364 #define	MII_DELAY		1			/* 1 microsecond */
365 #define	MII_PREAMBLE		0xffffffffUL
366 #define	MII_READ_FRAME		0x60000000UL
367 #define	MII_WRITE_FRAME		0x50020000UL
368 
369 
370 /* DMFE IOCTLS */
371 #define	ND_BASE			('N' << 8)	/* base */
372 #define	ND_GET			(ND_BASE + 0)	/* Get a value */
373 #define	ND_SET			(ND_BASE + 1)	/* Set a value */
374 
375 #define	DMFE_ND_GET		ND_GET
376 #define	DMFE_ND_SET		ND_SET
377 
378 #define	DMFEIOC			('G' << 8)
379 #define	DMFE_SET_LOOP_MODE	(DMFEIOC|1)
380 #define	DMFE_GET_LOOP_MODE	(DMFEIOC|2)
381 
382 /* argument structure for above */
383 typedef struct {
384 	int loopback;
385 } loopback_t;
386 
387 #define	DMFE_LOOPBACK_OFF	0
388 #define	DMFE_PHY_A_LOOPBACK_ON	1
389 #define	DMFE_PHY_D_LOOPBACK_ON	2
390 #define	DMFE_INT_LOOPBACK_ON	4
391 #define	DMFE_LOOPBACK_MODES	7	/* Bitwise OR of above	*/
392 
393 #ifdef __cplusplus
394 }
395 #endif
396 
397 #endif	/* _SYS_DMFE_H */
398