1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SYS_ZIL_H 27 #define _SYS_ZIL_H 28 29 #include <sys/types.h> 30 #include <sys/spa.h> 31 #include <sys/zio.h> 32 #include <sys/dmu.h> 33 34 #ifdef __cplusplus 35 extern "C" { 36 #endif 37 38 /* 39 * Intent log format: 40 * 41 * Each objset has its own intent log. The log header (zil_header_t) 42 * for objset N's intent log is kept in the Nth object of the SPA's 43 * intent_log objset. The log header points to a chain of log blocks, 44 * each of which contains log records (i.e., transactions) followed by 45 * a log block trailer (zil_trailer_t). The format of a log record 46 * depends on the record (or transaction) type, but all records begin 47 * with a common structure that defines the type, length, and txg. 48 */ 49 50 /* 51 * Intent log header - this on disk structure holds fields to manage 52 * the log. All fields are 64 bit to easily handle cross architectures. 53 */ 54 typedef struct zil_header { 55 uint64_t zh_claim_txg; /* txg in which log blocks were claimed */ 56 uint64_t zh_replay_seq; /* highest replayed sequence number */ 57 blkptr_t zh_log; /* log chain */ 58 uint64_t zh_claim_blk_seq; /* highest claimed block sequence number */ 59 uint64_t zh_flags; /* header flags */ 60 uint64_t zh_claim_lr_seq; /* highest claimed lr sequence number */ 61 uint64_t zh_pad[3]; 62 } zil_header_t; 63 64 /* 65 * zh_flags bit settings 66 */ 67 #define ZIL_REPLAY_NEEDED 0x1 /* replay needed - internal only */ 68 #define ZIL_CLAIM_LR_SEQ_VALID 0x2 /* zh_claim_lr_seq field is valid */ 69 70 /* 71 * Log block trailer - structure at the end of the header and each log block 72 * 73 * The zit_bt contains a zbt_cksum which for the intent log is 74 * the sequence number of this log block. A seq of 0 is invalid. 75 * The zbt_cksum is checked by the SPA against the sequence 76 * number passed in the blk_cksum field of the blkptr_t 77 */ 78 typedef struct zil_trailer { 79 uint64_t zit_pad; 80 blkptr_t zit_next_blk; /* next block in chain */ 81 uint64_t zit_nused; /* bytes in log block used */ 82 zio_block_tail_t zit_bt; /* block trailer */ 83 } zil_trailer_t; 84 85 #define ZIL_MIN_BLKSZ 4096ULL 86 #define ZIL_MAX_BLKSZ SPA_MAXBLOCKSIZE 87 #define ZIL_BLK_DATA_SZ(lwb) ((lwb)->lwb_sz - sizeof (zil_trailer_t)) 88 89 /* 90 * The words of a log block checksum. 91 */ 92 #define ZIL_ZC_GUID_0 0 93 #define ZIL_ZC_GUID_1 1 94 #define ZIL_ZC_OBJSET 2 95 #define ZIL_ZC_SEQ 3 96 97 typedef enum zil_create { 98 Z_FILE, 99 Z_DIR, 100 Z_XATTRDIR, 101 } zil_create_t; 102 103 /* 104 * size of xvattr log section. 105 * its composed of lr_attr_t + xvattr bitmap + 2 64 bit timestamps 106 * for create time and a single 64 bit integer for all of the attributes, 107 * and 4 64 bit integers (32 bytes) for the scanstamp. 108 * 109 */ 110 111 #define ZIL_XVAT_SIZE(mapsize) \ 112 sizeof (lr_attr_t) + (sizeof (uint32_t) * (mapsize - 1)) + \ 113 (sizeof (uint64_t) * 7) 114 115 /* 116 * Size of ACL in log. The ACE data is padded out to properly align 117 * on 8 byte boundary. 118 */ 119 120 #define ZIL_ACE_LENGTH(x) (roundup(x, sizeof (uint64_t))) 121 122 /* 123 * Intent log transaction types and record structures 124 */ 125 #define TX_CREATE 1 /* Create file */ 126 #define TX_MKDIR 2 /* Make directory */ 127 #define TX_MKXATTR 3 /* Make XATTR directory */ 128 #define TX_SYMLINK 4 /* Create symbolic link to a file */ 129 #define TX_REMOVE 5 /* Remove file */ 130 #define TX_RMDIR 6 /* Remove directory */ 131 #define TX_LINK 7 /* Create hard link to a file */ 132 #define TX_RENAME 8 /* Rename a file */ 133 #define TX_WRITE 9 /* File write */ 134 #define TX_TRUNCATE 10 /* Truncate a file */ 135 #define TX_SETATTR 11 /* Set file attributes */ 136 #define TX_ACL_V0 12 /* Set old formatted ACL */ 137 #define TX_ACL 13 /* Set ACL */ 138 #define TX_CREATE_ACL 14 /* create with ACL */ 139 #define TX_CREATE_ATTR 15 /* create + attrs */ 140 #define TX_CREATE_ACL_ATTR 16 /* create with ACL + attrs */ 141 #define TX_MKDIR_ACL 17 /* mkdir with ACL */ 142 #define TX_MKDIR_ATTR 18 /* mkdir with attr */ 143 #define TX_MKDIR_ACL_ATTR 19 /* mkdir with ACL + attrs */ 144 #define TX_WRITE2 20 /* dmu_sync EALREADY write */ 145 #define TX_MAX_TYPE 21 /* Max transaction type */ 146 147 /* 148 * The transactions for mkdir, symlink, remove, rmdir, link, and rename 149 * may have the following bit set, indicating the original request 150 * specified case-insensitive handling of names. 151 */ 152 #define TX_CI ((uint64_t)0x1 << 63) /* case-insensitive behavior requested */ 153 154 /* 155 * Transactions for write, truncate, setattr, acl_v0, and acl can be logged 156 * out of order. For convenience in the code, all such records must have 157 * lr_foid at the same offset. 158 */ 159 #define TX_OOO(txtype) \ 160 ((txtype) == TX_WRITE || \ 161 (txtype) == TX_TRUNCATE || \ 162 (txtype) == TX_SETATTR || \ 163 (txtype) == TX_ACL_V0 || \ 164 (txtype) == TX_ACL || \ 165 (txtype) == TX_WRITE2) 166 167 168 /* 169 * Format of log records. 170 * The fields are carefully defined to allow them to be aligned 171 * and sized the same on sparc & intel architectures. 172 * Each log record has a common structure at the beginning. 173 * 174 * Note, lrc_seq holds two different sequence numbers. Whilst in memory 175 * it contains the transaction sequence number. The log record on 176 * disk holds the sequence number of all log records which is used to 177 * ensure we don't replay the same record. The two sequence numbers are 178 * different because the transactions can now be pushed out of order. 179 */ 180 typedef struct { /* common log record header */ 181 uint64_t lrc_txtype; /* intent log transaction type */ 182 uint64_t lrc_reclen; /* transaction record length */ 183 uint64_t lrc_txg; /* dmu transaction group number */ 184 uint64_t lrc_seq; /* see comment above */ 185 } lr_t; 186 187 /* 188 * Common start of all out-of-order record types (TX_OOO() above). 189 */ 190 typedef struct { 191 lr_t lr_common; /* common portion of log record */ 192 uint64_t lr_foid; /* object id */ 193 } lr_ooo_t; 194 195 /* 196 * Handle option extended vattr attributes. 197 * 198 * Whenever new attributes are added the version number 199 * will need to be updated as will code in 200 * zfs_log.c and zfs_replay.c 201 */ 202 typedef struct { 203 uint32_t lr_attr_masksize; /* number of elements in array */ 204 uint32_t lr_attr_bitmap; /* First entry of array */ 205 /* remainder of array and any additional fields */ 206 } lr_attr_t; 207 208 /* 209 * log record for creates without optional ACL. 210 * This log record does support optional xvattr_t attributes. 211 */ 212 typedef struct { 213 lr_t lr_common; /* common portion of log record */ 214 uint64_t lr_doid; /* object id of directory */ 215 uint64_t lr_foid; /* object id of created file object */ 216 uint64_t lr_mode; /* mode of object */ 217 uint64_t lr_uid; /* uid of object */ 218 uint64_t lr_gid; /* gid of object */ 219 uint64_t lr_gen; /* generation (txg of creation) */ 220 uint64_t lr_crtime[2]; /* creation time */ 221 uint64_t lr_rdev; /* rdev of object to create */ 222 /* name of object to create follows this */ 223 /* for symlinks, link content follows name */ 224 /* for creates with xvattr data, the name follows the xvattr info */ 225 } lr_create_t; 226 227 /* 228 * FUID ACL record will be an array of ACEs from the original ACL. 229 * If this array includes ephemeral IDs, the record will also include 230 * an array of log-specific FUIDs to replace the ephemeral IDs. 231 * Only one copy of each unique domain will be present, so the log-specific 232 * FUIDs will use an index into a compressed domain table. On replay this 233 * information will be used to construct real FUIDs (and bypass idmap, 234 * since it may not be available). 235 */ 236 237 /* 238 * Log record for creates with optional ACL 239 * This log record is also used for recording any FUID 240 * information needed for replaying the create. If the 241 * file doesn't have any actual ACEs then the lr_aclcnt 242 * would be zero. 243 */ 244 typedef struct { 245 lr_create_t lr_create; /* common create portion */ 246 uint64_t lr_aclcnt; /* number of ACEs in ACL */ 247 uint64_t lr_domcnt; /* number of unique domains */ 248 uint64_t lr_fuidcnt; /* number of real fuids */ 249 uint64_t lr_acl_bytes; /* number of bytes in ACL */ 250 uint64_t lr_acl_flags; /* ACL flags */ 251 /* lr_acl_bytes number of variable sized ace's follows */ 252 /* if create is also setting xvattr's, then acl data follows xvattr */ 253 /* if ACE FUIDs are needed then they will follow the xvattr_t */ 254 /* Following the FUIDs will be the domain table information. */ 255 /* The FUIDs for the owner and group will be in the lr_create */ 256 /* portion of the record. */ 257 /* name follows ACL data */ 258 } lr_acl_create_t; 259 260 typedef struct { 261 lr_t lr_common; /* common portion of log record */ 262 uint64_t lr_doid; /* obj id of directory */ 263 /* name of object to remove follows this */ 264 } lr_remove_t; 265 266 typedef struct { 267 lr_t lr_common; /* common portion of log record */ 268 uint64_t lr_doid; /* obj id of directory */ 269 uint64_t lr_link_obj; /* obj id of link */ 270 /* name of object to link follows this */ 271 } lr_link_t; 272 273 typedef struct { 274 lr_t lr_common; /* common portion of log record */ 275 uint64_t lr_sdoid; /* obj id of source directory */ 276 uint64_t lr_tdoid; /* obj id of target directory */ 277 /* 2 strings: names of source and destination follow this */ 278 } lr_rename_t; 279 280 typedef struct { 281 lr_t lr_common; /* common portion of log record */ 282 uint64_t lr_foid; /* file object to write */ 283 uint64_t lr_offset; /* offset to write to */ 284 uint64_t lr_length; /* user data length to write */ 285 uint64_t lr_blkoff; /* no longer used */ 286 blkptr_t lr_blkptr; /* spa block pointer for replay */ 287 /* write data will follow for small writes */ 288 } lr_write_t; 289 290 typedef struct { 291 lr_t lr_common; /* common portion of log record */ 292 uint64_t lr_foid; /* object id of file to truncate */ 293 uint64_t lr_offset; /* offset to truncate from */ 294 uint64_t lr_length; /* length to truncate */ 295 } lr_truncate_t; 296 297 typedef struct { 298 lr_t lr_common; /* common portion of log record */ 299 uint64_t lr_foid; /* file object to change attributes */ 300 uint64_t lr_mask; /* mask of attributes to set */ 301 uint64_t lr_mode; /* mode to set */ 302 uint64_t lr_uid; /* uid to set */ 303 uint64_t lr_gid; /* gid to set */ 304 uint64_t lr_size; /* size to set */ 305 uint64_t lr_atime[2]; /* access time */ 306 uint64_t lr_mtime[2]; /* modification time */ 307 /* optional attribute lr_attr_t may be here */ 308 } lr_setattr_t; 309 310 typedef struct { 311 lr_t lr_common; /* common portion of log record */ 312 uint64_t lr_foid; /* obj id of file */ 313 uint64_t lr_aclcnt; /* number of acl entries */ 314 /* lr_aclcnt number of ace_t entries follow this */ 315 } lr_acl_v0_t; 316 317 typedef struct { 318 lr_t lr_common; /* common portion of log record */ 319 uint64_t lr_foid; /* obj id of file */ 320 uint64_t lr_aclcnt; /* number of ACEs in ACL */ 321 uint64_t lr_domcnt; /* number of unique domains */ 322 uint64_t lr_fuidcnt; /* number of real fuids */ 323 uint64_t lr_acl_bytes; /* number of bytes in ACL */ 324 uint64_t lr_acl_flags; /* ACL flags */ 325 /* lr_acl_bytes number of variable sized ace's follows */ 326 } lr_acl_t; 327 328 /* 329 * ZIL structure definitions, interface function prototype and globals. 330 */ 331 332 /* 333 * Writes are handled in three different ways: 334 * 335 * WR_INDIRECT: 336 * In this mode, if we need to commit the write later, then the block 337 * is immediately written into the file system (using dmu_sync), 338 * and a pointer to the block is put into the log record. 339 * When the txg commits the block is linked in. 340 * This saves additionally writing the data into the log record. 341 * There are a few requirements for this to occur: 342 * - write is greater than zfs/zvol_immediate_write_sz 343 * - not using slogs (as slogs are assumed to always be faster 344 * than writing into the main pool) 345 * - the write occupies only one block 346 * WR_COPIED: 347 * If we know we'll immediately be committing the 348 * transaction (FSYNC or FDSYNC), the we allocate a larger 349 * log record here for the data and copy the data in. 350 * WR_NEED_COPY: 351 * Otherwise we don't allocate a buffer, and *if* we need to 352 * flush the write later then a buffer is allocated and 353 * we retrieve the data using the dmu. 354 */ 355 typedef enum { 356 WR_INDIRECT, /* indirect - a large write (dmu_sync() data */ 357 /* and put blkptr in log, rather than actual data) */ 358 WR_COPIED, /* immediate - data is copied into lr_write_t */ 359 WR_NEED_COPY, /* immediate - data needs to be copied if pushed */ 360 WR_NUM_STATES /* number of states */ 361 } itx_wr_state_t; 362 363 typedef struct itx { 364 list_node_t itx_node; /* linkage on zl_itx_list */ 365 void *itx_private; /* type-specific opaque data */ 366 itx_wr_state_t itx_wr_state; /* write state */ 367 uint8_t itx_sync; /* synchronous transaction */ 368 uint64_t itx_sod; /* record size on disk */ 369 lr_t itx_lr; /* common part of log record */ 370 /* followed by type-specific part of lr_xx_t and its immediate data */ 371 } itx_t; 372 373 typedef int zil_parse_blk_func_t(zilog_t *zilog, blkptr_t *bp, void *arg, 374 uint64_t txg); 375 typedef int zil_parse_lr_func_t(zilog_t *zilog, lr_t *lr, void *arg, 376 uint64_t txg); 377 typedef int zil_replay_func_t(); 378 typedef int zil_get_data_t(void *arg, lr_write_t *lr, char *dbuf, zio_t *zio); 379 380 extern int zil_parse(zilog_t *zilog, zil_parse_blk_func_t *parse_blk_func, 381 zil_parse_lr_func_t *parse_lr_func, void *arg, uint64_t txg); 382 383 extern void zil_init(void); 384 extern void zil_fini(void); 385 386 extern zilog_t *zil_alloc(objset_t *os, zil_header_t *zh_phys); 387 extern void zil_free(zilog_t *zilog); 388 389 extern zilog_t *zil_open(objset_t *os, zil_get_data_t *get_data); 390 extern void zil_close(zilog_t *zilog); 391 392 extern void zil_replay(objset_t *os, void *arg, 393 zil_replay_func_t *replay_func[TX_MAX_TYPE]); 394 extern boolean_t zil_replaying(zilog_t *zilog, dmu_tx_t *tx); 395 extern void zil_destroy(zilog_t *zilog, boolean_t keep_first); 396 extern void zil_rollback_destroy(zilog_t *zilog, dmu_tx_t *tx); 397 398 extern itx_t *zil_itx_create(uint64_t txtype, size_t lrsize); 399 extern void zil_itx_destroy(itx_t *itx); 400 extern uint64_t zil_itx_assign(zilog_t *zilog, itx_t *itx, dmu_tx_t *tx); 401 402 extern void zil_commit(zilog_t *zilog, uint64_t seq, uint64_t oid); 403 404 extern int zil_vdev_offline(char *osname, void *txarg); 405 extern int zil_claim(char *osname, void *txarg); 406 extern int zil_check_log_chain(char *osname, void *txarg); 407 extern void zil_sync(zilog_t *zilog, dmu_tx_t *tx); 408 extern void zil_clean(zilog_t *zilog); 409 410 extern int zil_suspend(zilog_t *zilog); 411 extern void zil_resume(zilog_t *zilog); 412 413 extern void zil_add_block(zilog_t *zilog, const blkptr_t *bp); 414 extern int zil_bp_tree_add(zilog_t *zilog, const blkptr_t *bp); 415 416 extern void zil_set_logbias(zilog_t *zilog, uint64_t slogval); 417 418 extern int zil_disable; 419 420 #ifdef __cplusplus 421 } 422 #endif 423 424 #endif /* _SYS_ZIL_H */ 425