1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SYS_DMU_H 27 #define _SYS_DMU_H 28 29 /* 30 * This file describes the interface that the DMU provides for its 31 * consumers. 32 * 33 * The DMU also interacts with the SPA. That interface is described in 34 * dmu_spa.h. 35 */ 36 37 #include <sys/inttypes.h> 38 #include <sys/types.h> 39 #include <sys/param.h> 40 #include <sys/cred.h> 41 #include <sys/time.h> 42 43 #ifdef __cplusplus 44 extern "C" { 45 #endif 46 47 struct uio; 48 struct page; 49 struct vnode; 50 struct spa; 51 struct zilog; 52 struct zio; 53 struct blkptr; 54 struct zap_cursor; 55 struct dsl_dataset; 56 struct dsl_pool; 57 struct dnode; 58 struct drr_begin; 59 struct drr_end; 60 struct zbookmark; 61 struct spa; 62 struct nvlist; 63 struct arc_buf; 64 struct zio_prop; 65 66 typedef struct objset objset_t; 67 typedef struct dmu_tx dmu_tx_t; 68 typedef struct dsl_dir dsl_dir_t; 69 70 typedef enum dmu_object_type { 71 DMU_OT_NONE, 72 /* general: */ 73 DMU_OT_OBJECT_DIRECTORY, /* ZAP */ 74 DMU_OT_OBJECT_ARRAY, /* UINT64 */ 75 DMU_OT_PACKED_NVLIST, /* UINT8 (XDR by nvlist_pack/unpack) */ 76 DMU_OT_PACKED_NVLIST_SIZE, /* UINT64 */ 77 DMU_OT_BPLIST, /* UINT64 */ 78 DMU_OT_BPLIST_HDR, /* UINT64 */ 79 /* spa: */ 80 DMU_OT_SPACE_MAP_HEADER, /* UINT64 */ 81 DMU_OT_SPACE_MAP, /* UINT64 */ 82 /* zil: */ 83 DMU_OT_INTENT_LOG, /* UINT64 */ 84 /* dmu: */ 85 DMU_OT_DNODE, /* DNODE */ 86 DMU_OT_OBJSET, /* OBJSET */ 87 /* dsl: */ 88 DMU_OT_DSL_DIR, /* UINT64 */ 89 DMU_OT_DSL_DIR_CHILD_MAP, /* ZAP */ 90 DMU_OT_DSL_DS_SNAP_MAP, /* ZAP */ 91 DMU_OT_DSL_PROPS, /* ZAP */ 92 DMU_OT_DSL_DATASET, /* UINT64 */ 93 /* zpl: */ 94 DMU_OT_ZNODE, /* ZNODE */ 95 DMU_OT_OLDACL, /* Old ACL */ 96 DMU_OT_PLAIN_FILE_CONTENTS, /* UINT8 */ 97 DMU_OT_DIRECTORY_CONTENTS, /* ZAP */ 98 DMU_OT_MASTER_NODE, /* ZAP */ 99 DMU_OT_UNLINKED_SET, /* ZAP */ 100 /* zvol: */ 101 DMU_OT_ZVOL, /* UINT8 */ 102 DMU_OT_ZVOL_PROP, /* ZAP */ 103 /* other; for testing only! */ 104 DMU_OT_PLAIN_OTHER, /* UINT8 */ 105 DMU_OT_UINT64_OTHER, /* UINT64 */ 106 DMU_OT_ZAP_OTHER, /* ZAP */ 107 /* new object types: */ 108 DMU_OT_ERROR_LOG, /* ZAP */ 109 DMU_OT_SPA_HISTORY, /* UINT8 */ 110 DMU_OT_SPA_HISTORY_OFFSETS, /* spa_his_phys_t */ 111 DMU_OT_POOL_PROPS, /* ZAP */ 112 DMU_OT_DSL_PERMS, /* ZAP */ 113 DMU_OT_ACL, /* ACL */ 114 DMU_OT_SYSACL, /* SYSACL */ 115 DMU_OT_FUID, /* FUID table (Packed NVLIST UINT8) */ 116 DMU_OT_FUID_SIZE, /* FUID table size UINT64 */ 117 DMU_OT_NEXT_CLONES, /* ZAP */ 118 DMU_OT_SCRUB_QUEUE, /* ZAP */ 119 DMU_OT_USERGROUP_USED, /* ZAP */ 120 DMU_OT_USERGROUP_QUOTA, /* ZAP */ 121 DMU_OT_USERREFS, /* ZAP */ 122 DMU_OT_DDT_ZAP, /* ZAP */ 123 DMU_OT_DDT_STATS, /* ZAP */ 124 DMU_OT_NUMTYPES 125 } dmu_object_type_t; 126 127 typedef enum dmu_objset_type { 128 DMU_OST_NONE, 129 DMU_OST_META, 130 DMU_OST_ZFS, 131 DMU_OST_ZVOL, 132 DMU_OST_OTHER, /* For testing only! */ 133 DMU_OST_ANY, /* Be careful! */ 134 DMU_OST_NUMTYPES 135 } dmu_objset_type_t; 136 137 void byteswap_uint64_array(void *buf, size_t size); 138 void byteswap_uint32_array(void *buf, size_t size); 139 void byteswap_uint16_array(void *buf, size_t size); 140 void byteswap_uint8_array(void *buf, size_t size); 141 void zap_byteswap(void *buf, size_t size); 142 void zfs_oldacl_byteswap(void *buf, size_t size); 143 void zfs_acl_byteswap(void *buf, size_t size); 144 void zfs_znode_byteswap(void *buf, size_t size); 145 146 #define DS_FIND_SNAPSHOTS (1<<0) 147 #define DS_FIND_CHILDREN (1<<1) 148 149 /* 150 * The maximum number of bytes that can be accessed as part of one 151 * operation, including metadata. 152 */ 153 #define DMU_MAX_ACCESS (10<<20) /* 10MB */ 154 #define DMU_MAX_DELETEBLKCNT (20480) /* ~5MB of indirect blocks */ 155 156 #define DMU_USERUSED_OBJECT (-1ULL) 157 #define DMU_GROUPUSED_OBJECT (-2ULL) 158 #define DMU_DEADLIST_OBJECT (-3ULL) 159 160 /* 161 * Public routines to create, destroy, open, and close objsets. 162 */ 163 int dmu_objset_hold(const char *name, void *tag, objset_t **osp); 164 int dmu_objset_own(const char *name, dmu_objset_type_t type, 165 boolean_t readonly, void *tag, objset_t **osp); 166 void dmu_objset_rele(objset_t *os, void *tag); 167 void dmu_objset_disown(objset_t *os, void *tag); 168 int dmu_objset_open_ds(struct dsl_dataset *ds, objset_t **osp); 169 170 int dmu_objset_evict_dbufs(objset_t *os); 171 int dmu_objset_create(const char *name, dmu_objset_type_t type, uint64_t flags, 172 void (*func)(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx), void *arg); 173 int dmu_objset_clone(const char *name, struct dsl_dataset *clone_origin, 174 uint64_t flags); 175 int dmu_objset_destroy(const char *name, boolean_t defer); 176 int dmu_snapshots_destroy(char *fsname, char *snapname, boolean_t defer); 177 int dmu_objset_snapshot(char *fsname, char *snapname, struct nvlist *props, 178 boolean_t recursive); 179 int dmu_objset_rename(const char *name, const char *newname, 180 boolean_t recursive); 181 int dmu_objset_find(char *name, int func(char *, void *), void *arg, 182 int flags); 183 void dmu_objset_byteswap(void *buf, size_t size); 184 185 typedef struct dmu_buf { 186 uint64_t db_object; /* object that this buffer is part of */ 187 uint64_t db_offset; /* byte offset in this object */ 188 uint64_t db_size; /* size of buffer in bytes */ 189 void *db_data; /* data in buffer */ 190 } dmu_buf_t; 191 192 typedef void dmu_buf_evict_func_t(struct dmu_buf *db, void *user_ptr); 193 194 /* 195 * The names of zap entries in the DIRECTORY_OBJECT of the MOS. 196 */ 197 #define DMU_POOL_DIRECTORY_OBJECT 1 198 #define DMU_POOL_CONFIG "config" 199 #define DMU_POOL_ROOT_DATASET "root_dataset" 200 #define DMU_POOL_SYNC_BPLIST "sync_bplist" 201 #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub" 202 #define DMU_POOL_ERRLOG_LAST "errlog_last" 203 #define DMU_POOL_SPARES "spares" 204 #define DMU_POOL_DEFLATE "deflate" 205 #define DMU_POOL_HISTORY "history" 206 #define DMU_POOL_PROPS "pool_props" 207 #define DMU_POOL_L2CACHE "l2cache" 208 #define DMU_POOL_TMP_USERREFS "tmp_userrefs" 209 #define DMU_POOL_DDT "DDT-%s-%s-%s" 210 #define DMU_POOL_DDT_STATS "DDT-statistics" 211 212 /* 4x8 zbookmark_t */ 213 #define DMU_POOL_SCRUB_BOOKMARK "scrub_bookmark" 214 /* 1x8 zap obj DMU_OT_SCRUB_QUEUE */ 215 #define DMU_POOL_SCRUB_QUEUE "scrub_queue" 216 /* 1x8 txg */ 217 #define DMU_POOL_SCRUB_MIN_TXG "scrub_min_txg" 218 /* 1x8 txg */ 219 #define DMU_POOL_SCRUB_MAX_TXG "scrub_max_txg" 220 /* 1x4 enum scrub_func */ 221 #define DMU_POOL_SCRUB_FUNC "scrub_func" 222 /* 1x8 count */ 223 #define DMU_POOL_SCRUB_ERRORS "scrub_errors" 224 225 /* 226 * Allocate an object from this objset. The range of object numbers 227 * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode. 228 * 229 * The transaction must be assigned to a txg. The newly allocated 230 * object will be "held" in the transaction (ie. you can modify the 231 * newly allocated object in this transaction). 232 * 233 * dmu_object_alloc() chooses an object and returns it in *objectp. 234 * 235 * dmu_object_claim() allocates a specific object number. If that 236 * number is already allocated, it fails and returns EEXIST. 237 * 238 * Return 0 on success, or ENOSPC or EEXIST as specified above. 239 */ 240 uint64_t dmu_object_alloc(objset_t *os, dmu_object_type_t ot, 241 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 242 int dmu_object_claim(objset_t *os, uint64_t object, dmu_object_type_t ot, 243 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 244 int dmu_object_reclaim(objset_t *os, uint64_t object, dmu_object_type_t ot, 245 int blocksize, dmu_object_type_t bonustype, int bonuslen); 246 247 /* 248 * Free an object from this objset. 249 * 250 * The object's data will be freed as well (ie. you don't need to call 251 * dmu_free(object, 0, -1, tx)). 252 * 253 * The object need not be held in the transaction. 254 * 255 * If there are any holds on this object's buffers (via dmu_buf_hold()), 256 * or tx holds on the object (via dmu_tx_hold_object()), you can not 257 * free it; it fails and returns EBUSY. 258 * 259 * If the object is not allocated, it fails and returns ENOENT. 260 * 261 * Return 0 on success, or EBUSY or ENOENT as specified above. 262 */ 263 int dmu_object_free(objset_t *os, uint64_t object, dmu_tx_t *tx); 264 265 /* 266 * Find the next allocated or free object. 267 * 268 * The objectp parameter is in-out. It will be updated to be the next 269 * object which is allocated. Ignore objects which have not been 270 * modified since txg. 271 * 272 * XXX Can only be called on a objset with no dirty data. 273 * 274 * Returns 0 on success, or ENOENT if there are no more objects. 275 */ 276 int dmu_object_next(objset_t *os, uint64_t *objectp, 277 boolean_t hole, uint64_t txg); 278 279 /* 280 * Set the data blocksize for an object. 281 * 282 * The object cannot have any blocks allcated beyond the first. If 283 * the first block is allocated already, the new size must be greater 284 * than the current block size. If these conditions are not met, 285 * ENOTSUP will be returned. 286 * 287 * Returns 0 on success, or EBUSY if there are any holds on the object 288 * contents, or ENOTSUP as described above. 289 */ 290 int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size, 291 int ibs, dmu_tx_t *tx); 292 293 /* 294 * Set the checksum property on a dnode. The new checksum algorithm will 295 * apply to all newly written blocks; existing blocks will not be affected. 296 */ 297 void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum, 298 dmu_tx_t *tx); 299 300 /* 301 * Set the compress property on a dnode. The new compression algorithm will 302 * apply to all newly written blocks; existing blocks will not be affected. 303 */ 304 void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress, 305 dmu_tx_t *tx); 306 307 /* 308 * Decide how to write a block: checksum, compression, number of copies, etc. 309 */ 310 #define WP_NOFILL 0x1 311 #define WP_DMU_SYNC 0x2 312 313 void dmu_write_policy(objset_t *os, struct dnode *dn, int level, int wp, 314 struct zio_prop *zp); 315 /* 316 * The bonus data is accessed more or less like a regular buffer. 317 * You must dmu_bonus_hold() to get the buffer, which will give you a 318 * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus 319 * data. As with any normal buffer, you must call dmu_buf_read() to 320 * read db_data, dmu_buf_will_dirty() before modifying it, and the 321 * object must be held in an assigned transaction before calling 322 * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus 323 * buffer as well. You must release your hold with dmu_buf_rele(). 324 */ 325 int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **); 326 int dmu_bonus_max(void); 327 int dmu_set_bonus(dmu_buf_t *, int, dmu_tx_t *); 328 329 /* 330 * Obtain the DMU buffer from the specified object which contains the 331 * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so 332 * that it will remain in memory. You must release the hold with 333 * dmu_buf_rele(). You musn't access the dmu_buf_t after releasing your 334 * hold. You must have a hold on any dmu_buf_t* you pass to the DMU. 335 * 336 * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill 337 * on the returned buffer before reading or writing the buffer's 338 * db_data. The comments for those routines describe what particular 339 * operations are valid after calling them. 340 * 341 * The object number must be a valid, allocated object number. 342 */ 343 int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset, 344 void *tag, dmu_buf_t **); 345 void dmu_buf_add_ref(dmu_buf_t *db, void* tag); 346 void dmu_buf_rele(dmu_buf_t *db, void *tag); 347 uint64_t dmu_buf_refcount(dmu_buf_t *db); 348 349 /* 350 * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a 351 * range of an object. A pointer to an array of dmu_buf_t*'s is 352 * returned (in *dbpp). 353 * 354 * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and 355 * frees the array. The hold on the array of buffers MUST be released 356 * with dmu_buf_rele_array. You can NOT release the hold on each buffer 357 * individually with dmu_buf_rele. 358 */ 359 int dmu_buf_hold_array_by_bonus(dmu_buf_t *db, uint64_t offset, 360 uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp); 361 void dmu_buf_rele_array(dmu_buf_t **, int numbufs, void *tag); 362 363 /* 364 * Returns NULL on success, or the existing user ptr if it's already 365 * been set. 366 * 367 * user_ptr is for use by the user and can be obtained via dmu_buf_get_user(). 368 * 369 * user_data_ptr_ptr should be NULL, or a pointer to a pointer which 370 * will be set to db->db_data when you are allowed to access it. Note 371 * that db->db_data (the pointer) can change when you do dmu_buf_read(), 372 * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill(). 373 * *user_data_ptr_ptr will be set to the new value when it changes. 374 * 375 * If non-NULL, pageout func will be called when this buffer is being 376 * excised from the cache, so that you can clean up the data structure 377 * pointed to by user_ptr. 378 * 379 * dmu_evict_user() will call the pageout func for all buffers in a 380 * objset with a given pageout func. 381 */ 382 void *dmu_buf_set_user(dmu_buf_t *db, void *user_ptr, void *user_data_ptr_ptr, 383 dmu_buf_evict_func_t *pageout_func); 384 /* 385 * set_user_ie is the same as set_user, but request immediate eviction 386 * when hold count goes to zero. 387 */ 388 void *dmu_buf_set_user_ie(dmu_buf_t *db, void *user_ptr, 389 void *user_data_ptr_ptr, dmu_buf_evict_func_t *pageout_func); 390 void *dmu_buf_update_user(dmu_buf_t *db_fake, void *old_user_ptr, 391 void *user_ptr, void *user_data_ptr_ptr, 392 dmu_buf_evict_func_t *pageout_func); 393 void dmu_evict_user(objset_t *os, dmu_buf_evict_func_t *func); 394 395 /* 396 * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set. 397 */ 398 void *dmu_buf_get_user(dmu_buf_t *db); 399 400 /* 401 * Indicate that you are going to modify the buffer's data (db_data). 402 * 403 * The transaction (tx) must be assigned to a txg (ie. you've called 404 * dmu_tx_assign()). The buffer's object must be held in the tx 405 * (ie. you've called dmu_tx_hold_object(tx, db->db_object)). 406 */ 407 void dmu_buf_will_dirty(dmu_buf_t *db, dmu_tx_t *tx); 408 409 /* 410 * Tells if the given dbuf is freeable. 411 */ 412 boolean_t dmu_buf_freeable(dmu_buf_t *); 413 414 /* 415 * You must create a transaction, then hold the objects which you will 416 * (or might) modify as part of this transaction. Then you must assign 417 * the transaction to a transaction group. Once the transaction has 418 * been assigned, you can modify buffers which belong to held objects as 419 * part of this transaction. You can't modify buffers before the 420 * transaction has been assigned; you can't modify buffers which don't 421 * belong to objects which this transaction holds; you can't hold 422 * objects once the transaction has been assigned. You may hold an 423 * object which you are going to free (with dmu_object_free()), but you 424 * don't have to. 425 * 426 * You can abort the transaction before it has been assigned. 427 * 428 * Note that you may hold buffers (with dmu_buf_hold) at any time, 429 * regardless of transaction state. 430 */ 431 432 #define DMU_NEW_OBJECT (-1ULL) 433 #define DMU_OBJECT_END (-1ULL) 434 435 dmu_tx_t *dmu_tx_create(objset_t *os); 436 void dmu_tx_hold_write(dmu_tx_t *tx, uint64_t object, uint64_t off, int len); 437 void dmu_tx_hold_free(dmu_tx_t *tx, uint64_t object, uint64_t off, 438 uint64_t len); 439 void dmu_tx_hold_zap(dmu_tx_t *tx, uint64_t object, int add, const char *name); 440 void dmu_tx_hold_bonus(dmu_tx_t *tx, uint64_t object); 441 void dmu_tx_abort(dmu_tx_t *tx); 442 int dmu_tx_assign(dmu_tx_t *tx, uint64_t txg_how); 443 void dmu_tx_wait(dmu_tx_t *tx); 444 void dmu_tx_commit(dmu_tx_t *tx); 445 446 /* 447 * To register a commit callback, dmu_tx_callback_register() must be called. 448 * 449 * dcb_data is a pointer to caller private data that is passed on as a 450 * callback parameter. The caller is responsible for properly allocating and 451 * freeing it. 452 * 453 * When registering a callback, the transaction must be already created, but 454 * it cannot be committed or aborted. It can be assigned to a txg or not. 455 * 456 * The callback will be called after the transaction has been safely written 457 * to stable storage and will also be called if the dmu_tx is aborted. 458 * If there is any error which prevents the transaction from being committed to 459 * disk, the callback will be called with a value of error != 0. 460 */ 461 typedef void dmu_tx_callback_func_t(void *dcb_data, int error); 462 463 void dmu_tx_callback_register(dmu_tx_t *tx, dmu_tx_callback_func_t *dcb_func, 464 void *dcb_data); 465 466 /* 467 * Free up the data blocks for a defined range of a file. If size is 468 * zero, the range from offset to end-of-file is freed. 469 */ 470 int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset, 471 uint64_t size, dmu_tx_t *tx); 472 int dmu_free_long_range(objset_t *os, uint64_t object, uint64_t offset, 473 uint64_t size); 474 int dmu_free_object(objset_t *os, uint64_t object); 475 476 /* 477 * Convenience functions. 478 * 479 * Canfail routines will return 0 on success, or an errno if there is a 480 * nonrecoverable I/O error. 481 */ 482 #define DMU_READ_PREFETCH 0 /* prefetch */ 483 #define DMU_READ_NO_PREFETCH 1 /* don't prefetch */ 484 int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 485 void *buf, uint32_t flags); 486 void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 487 const void *buf, dmu_tx_t *tx); 488 void dmu_prealloc(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 489 dmu_tx_t *tx); 490 int dmu_read_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size); 491 int dmu_write_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size, 492 dmu_tx_t *tx); 493 int dmu_write_pages(objset_t *os, uint64_t object, uint64_t offset, 494 uint64_t size, struct page *pp, dmu_tx_t *tx); 495 struct arc_buf *dmu_request_arcbuf(dmu_buf_t *handle, int size); 496 void dmu_return_arcbuf(struct arc_buf *buf); 497 void dmu_assign_arcbuf(dmu_buf_t *handle, uint64_t offset, struct arc_buf *buf, 498 dmu_tx_t *tx); 499 500 extern int zfs_prefetch_disable; 501 502 /* 503 * Asynchronously try to read in the data. 504 */ 505 void dmu_prefetch(objset_t *os, uint64_t object, uint64_t offset, 506 uint64_t len); 507 508 typedef struct dmu_object_info { 509 /* All sizes are in bytes unless otherwise indicated. */ 510 uint32_t doi_data_block_size; 511 uint32_t doi_metadata_block_size; 512 dmu_object_type_t doi_type; 513 dmu_object_type_t doi_bonus_type; 514 uint64_t doi_bonus_size; 515 uint8_t doi_indirection; /* 2 = dnode->indirect->data */ 516 uint8_t doi_checksum; 517 uint8_t doi_compress; 518 uint8_t doi_pad[5]; 519 uint64_t doi_physical_blocks_512; /* data + metadata, 512b blks */ 520 uint64_t doi_max_offset; 521 uint64_t doi_fill_count; /* number of non-empty blocks */ 522 } dmu_object_info_t; 523 524 typedef void arc_byteswap_func_t(void *buf, size_t size); 525 526 typedef struct dmu_object_type_info { 527 arc_byteswap_func_t *ot_byteswap; 528 boolean_t ot_metadata; 529 char *ot_name; 530 } dmu_object_type_info_t; 531 532 extern const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES]; 533 534 /* 535 * Get information on a DMU object. 536 * 537 * Return 0 on success or ENOENT if object is not allocated. 538 * 539 * If doi is NULL, just indicates whether the object exists. 540 */ 541 int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi); 542 void dmu_object_info_from_dnode(struct dnode *dn, dmu_object_info_t *doi); 543 void dmu_object_info_from_db(dmu_buf_t *db, dmu_object_info_t *doi); 544 void dmu_object_size_from_db(dmu_buf_t *db, uint32_t *blksize, 545 u_longlong_t *nblk512); 546 547 typedef struct dmu_objset_stats { 548 uint64_t dds_num_clones; /* number of clones of this */ 549 uint64_t dds_creation_txg; 550 uint64_t dds_guid; 551 dmu_objset_type_t dds_type; 552 uint8_t dds_is_snapshot; 553 uint8_t dds_inconsistent; 554 char dds_origin[MAXNAMELEN]; 555 } dmu_objset_stats_t; 556 557 /* 558 * Get stats on a dataset. 559 */ 560 void dmu_objset_fast_stat(objset_t *os, dmu_objset_stats_t *stat); 561 562 /* 563 * Add entries to the nvlist for all the objset's properties. See 564 * zfs_prop_table[] and zfs(1m) for details on the properties. 565 */ 566 void dmu_objset_stats(objset_t *os, struct nvlist *nv); 567 568 /* 569 * Get the space usage statistics for statvfs(). 570 * 571 * refdbytes is the amount of space "referenced" by this objset. 572 * availbytes is the amount of space available to this objset, taking 573 * into account quotas & reservations, assuming that no other objsets 574 * use the space first. These values correspond to the 'referenced' and 575 * 'available' properties, described in the zfs(1m) manpage. 576 * 577 * usedobjs and availobjs are the number of objects currently allocated, 578 * and available. 579 */ 580 void dmu_objset_space(objset_t *os, uint64_t *refdbytesp, uint64_t *availbytesp, 581 uint64_t *usedobjsp, uint64_t *availobjsp); 582 583 /* 584 * The fsid_guid is a 56-bit ID that can change to avoid collisions. 585 * (Contrast with the ds_guid which is a 64-bit ID that will never 586 * change, so there is a small probability that it will collide.) 587 */ 588 uint64_t dmu_objset_fsid_guid(objset_t *os); 589 590 /* 591 * Get the [cm]time for an objset's snapshot dir 592 */ 593 timestruc_t dmu_objset_snap_cmtime(objset_t *os); 594 595 int dmu_objset_is_snapshot(objset_t *os); 596 597 extern struct spa *dmu_objset_spa(objset_t *os); 598 extern struct zilog *dmu_objset_zil(objset_t *os); 599 extern struct dsl_pool *dmu_objset_pool(objset_t *os); 600 extern struct dsl_dataset *dmu_objset_ds(objset_t *os); 601 extern void dmu_objset_name(objset_t *os, char *buf); 602 extern dmu_objset_type_t dmu_objset_type(objset_t *os); 603 extern uint64_t dmu_objset_id(objset_t *os); 604 extern uint64_t dmu_objset_logbias(objset_t *os); 605 extern int dmu_snapshot_list_next(objset_t *os, int namelen, char *name, 606 uint64_t *id, uint64_t *offp, boolean_t *case_conflict); 607 extern int dmu_snapshot_realname(objset_t *os, char *name, char *real, 608 int maxlen, boolean_t *conflict); 609 extern int dmu_dir_list_next(objset_t *os, int namelen, char *name, 610 uint64_t *idp, uint64_t *offp); 611 612 typedef int objset_used_cb_t(dmu_object_type_t bonustype, 613 void *bonus, uint64_t *userp, uint64_t *groupp); 614 extern void dmu_objset_register_type(dmu_objset_type_t ost, 615 objset_used_cb_t *cb); 616 extern void dmu_objset_set_user(objset_t *os, void *user_ptr); 617 extern void *dmu_objset_get_user(objset_t *os); 618 619 /* 620 * Return the txg number for the given assigned transaction. 621 */ 622 uint64_t dmu_tx_get_txg(dmu_tx_t *tx); 623 624 /* 625 * Synchronous write. 626 * If a parent zio is provided this function initiates a write on the 627 * provided buffer as a child of the parent zio. 628 * In the absence of a parent zio, the write is completed synchronously. 629 * At write completion, blk is filled with the bp of the written block. 630 * Note that while the data covered by this function will be on stable 631 * storage when the write completes this new data does not become a 632 * permanent part of the file until the associated transaction commits. 633 */ 634 635 /* 636 * {zfs,zvol,ztest}_get_done() args 637 */ 638 typedef struct zgd { 639 struct zilog *zgd_zilog; 640 struct blkptr *zgd_bp; 641 dmu_buf_t *zgd_db; 642 struct rl *zgd_rl; 643 void *zgd_private; 644 } zgd_t; 645 646 typedef void dmu_sync_cb_t(zgd_t *arg, int error); 647 int dmu_sync(struct zio *zio, uint64_t txg, dmu_sync_cb_t *done, zgd_t *zgd); 648 649 /* 650 * Find the next hole or data block in file starting at *off 651 * Return found offset in *off. Return ESRCH for end of file. 652 */ 653 int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole, 654 uint64_t *off); 655 656 /* 657 * Initial setup and final teardown. 658 */ 659 extern void dmu_init(void); 660 extern void dmu_fini(void); 661 662 typedef void (*dmu_traverse_cb_t)(objset_t *os, void *arg, struct blkptr *bp, 663 uint64_t object, uint64_t offset, int len); 664 void dmu_traverse_objset(objset_t *os, uint64_t txg_start, 665 dmu_traverse_cb_t cb, void *arg); 666 667 int dmu_sendbackup(objset_t *tosnap, objset_t *fromsnap, boolean_t fromorigin, 668 struct vnode *vp, offset_t *off); 669 670 typedef struct dmu_recv_cookie { 671 /* 672 * This structure is opaque! 673 * 674 * If logical and real are different, we are recving the stream 675 * into the "real" temporary clone, and then switching it with 676 * the "logical" target. 677 */ 678 struct dsl_dataset *drc_logical_ds; 679 struct dsl_dataset *drc_real_ds; 680 struct drr_begin *drc_drrb; 681 char *drc_tosnap; 682 char *drc_top_ds; 683 boolean_t drc_newfs; 684 boolean_t drc_force; 685 } dmu_recv_cookie_t; 686 687 int dmu_recv_begin(char *tofs, char *tosnap, char *topds, struct drr_begin *, 688 boolean_t force, objset_t *origin, dmu_recv_cookie_t *); 689 int dmu_recv_stream(dmu_recv_cookie_t *drc, struct vnode *vp, offset_t *voffp); 690 int dmu_recv_end(dmu_recv_cookie_t *drc); 691 692 /* CRC64 table */ 693 #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */ 694 extern uint64_t zfs_crc64_table[256]; 695 696 #ifdef __cplusplus 697 } 698 #endif 699 700 #endif /* _SYS_DMU_H */ 701