1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved. 24 * Portions Copyright 2011 iXsystems, Inc 25 * Copyright (c) 2012 by Delphix. All rights reserved. 26 */ 27 28 #include <sys/zfs_context.h> 29 #include <sys/types.h> 30 #include <sys/param.h> 31 #include <sys/systm.h> 32 #include <sys/sysmacros.h> 33 #include <sys/dmu.h> 34 #include <sys/dmu_impl.h> 35 #include <sys/dmu_objset.h> 36 #include <sys/dbuf.h> 37 #include <sys/dnode.h> 38 #include <sys/zap.h> 39 #include <sys/sa.h> 40 #include <sys/sunddi.h> 41 #include <sys/sa_impl.h> 42 #include <sys/dnode.h> 43 #include <sys/errno.h> 44 #include <sys/zfs_context.h> 45 46 /* 47 * ZFS System attributes: 48 * 49 * A generic mechanism to allow for arbitrary attributes 50 * to be stored in a dnode. The data will be stored in the bonus buffer of 51 * the dnode and if necessary a special "spill" block will be used to handle 52 * overflow situations. The spill block will be sized to fit the data 53 * from 512 - 128K. When a spill block is used the BP (blkptr_t) for the 54 * spill block is stored at the end of the current bonus buffer. Any 55 * attributes that would be in the way of the blkptr_t will be relocated 56 * into the spill block. 57 * 58 * Attribute registration: 59 * 60 * Stored persistently on a per dataset basis 61 * a mapping between attribute "string" names and their actual attribute 62 * numeric values, length, and byteswap function. The names are only used 63 * during registration. All attributes are known by their unique attribute 64 * id value. If an attribute can have a variable size then the value 65 * 0 will be used to indicate this. 66 * 67 * Attribute Layout: 68 * 69 * Attribute layouts are a way to compactly store multiple attributes, but 70 * without taking the overhead associated with managing each attribute 71 * individually. Since you will typically have the same set of attributes 72 * stored in the same order a single table will be used to represent that 73 * layout. The ZPL for example will usually have only about 10 different 74 * layouts (regular files, device files, symlinks, 75 * regular files + scanstamp, files/dir with extended attributes, and then 76 * you have the possibility of all of those minus ACL, because it would 77 * be kicked out into the spill block) 78 * 79 * Layouts are simply an array of the attributes and their 80 * ordering i.e. [0, 1, 4, 5, 2] 81 * 82 * Each distinct layout is given a unique layout number and that is whats 83 * stored in the header at the beginning of the SA data buffer. 84 * 85 * A layout only covers a single dbuf (bonus or spill). If a set of 86 * attributes is split up between the bonus buffer and a spill buffer then 87 * two different layouts will be used. This allows us to byteswap the 88 * spill without looking at the bonus buffer and keeps the on disk format of 89 * the bonus and spill buffer the same. 90 * 91 * Adding a single attribute will cause the entire set of attributes to 92 * be rewritten and could result in a new layout number being constructed 93 * as part of the rewrite if no such layout exists for the new set of 94 * attribues. The new attribute will be appended to the end of the already 95 * existing attributes. 96 * 97 * Both the attribute registration and attribute layout information are 98 * stored in normal ZAP attributes. Their should be a small number of 99 * known layouts and the set of attributes is assumed to typically be quite 100 * small. 101 * 102 * The registered attributes and layout "table" information is maintained 103 * in core and a special "sa_os_t" is attached to the objset_t. 104 * 105 * A special interface is provided to allow for quickly applying 106 * a large set of attributes at once. sa_replace_all_by_template() is 107 * used to set an array of attributes. This is used by the ZPL when 108 * creating a brand new file. The template that is passed into the function 109 * specifies the attribute, size for variable length attributes, location of 110 * data and special "data locator" function if the data isn't in a contiguous 111 * location. 112 * 113 * Byteswap implications: 114 * Since the SA attributes are not entirely self describing we can't do 115 * the normal byteswap processing. The special ZAP layout attribute and 116 * attribute registration attributes define the byteswap function and the 117 * size of the attributes, unless it is variable sized. 118 * The normal ZFS byteswapping infrastructure assumes you don't need 119 * to read any objects in order to do the necessary byteswapping. Whereas 120 * SA attributes can only be properly byteswapped if the dataset is opened 121 * and the layout/attribute ZAP attributes are available. Because of this 122 * the SA attributes will be byteswapped when they are first accessed by 123 * the SA code that will read the SA data. 124 */ 125 126 typedef void (sa_iterfunc_t)(void *hdr, void *addr, sa_attr_type_t, 127 uint16_t length, int length_idx, boolean_t, void *userp); 128 129 static int sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype); 130 static void sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab); 131 static void *sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype, 132 void *data); 133 static void sa_idx_tab_rele(objset_t *os, void *arg); 134 static void sa_copy_data(sa_data_locator_t *func, void *start, void *target, 135 int buflen); 136 static int sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr, 137 sa_data_op_t action, sa_data_locator_t *locator, void *datastart, 138 uint16_t buflen, dmu_tx_t *tx); 139 140 arc_byteswap_func_t *sa_bswap_table[] = { 141 byteswap_uint64_array, 142 byteswap_uint32_array, 143 byteswap_uint16_array, 144 byteswap_uint8_array, 145 zfs_acl_byteswap, 146 }; 147 148 #define SA_COPY_DATA(f, s, t, l) \ 149 { \ 150 if (f == NULL) { \ 151 if (l == 8) { \ 152 *(uint64_t *)t = *(uint64_t *)s; \ 153 } else if (l == 16) { \ 154 *(uint64_t *)t = *(uint64_t *)s; \ 155 *(uint64_t *)((uintptr_t)t + 8) = \ 156 *(uint64_t *)((uintptr_t)s + 8); \ 157 } else { \ 158 bcopy(s, t, l); \ 159 } \ 160 } else \ 161 sa_copy_data(f, s, t, l); \ 162 } 163 164 /* 165 * This table is fixed and cannot be changed. Its purpose is to 166 * allow the SA code to work with both old/new ZPL file systems. 167 * It contains the list of legacy attributes. These attributes aren't 168 * stored in the "attribute" registry zap objects, since older ZPL file systems 169 * won't have the registry. Only objsets of type ZFS_TYPE_FILESYSTEM will 170 * use this static table. 171 */ 172 sa_attr_reg_t sa_legacy_attrs[] = { 173 {"ZPL_ATIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 0}, 174 {"ZPL_MTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 1}, 175 {"ZPL_CTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 2}, 176 {"ZPL_CRTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 3}, 177 {"ZPL_GEN", sizeof (uint64_t), SA_UINT64_ARRAY, 4}, 178 {"ZPL_MODE", sizeof (uint64_t), SA_UINT64_ARRAY, 5}, 179 {"ZPL_SIZE", sizeof (uint64_t), SA_UINT64_ARRAY, 6}, 180 {"ZPL_PARENT", sizeof (uint64_t), SA_UINT64_ARRAY, 7}, 181 {"ZPL_LINKS", sizeof (uint64_t), SA_UINT64_ARRAY, 8}, 182 {"ZPL_XATTR", sizeof (uint64_t), SA_UINT64_ARRAY, 9}, 183 {"ZPL_RDEV", sizeof (uint64_t), SA_UINT64_ARRAY, 10}, 184 {"ZPL_FLAGS", sizeof (uint64_t), SA_UINT64_ARRAY, 11}, 185 {"ZPL_UID", sizeof (uint64_t), SA_UINT64_ARRAY, 12}, 186 {"ZPL_GID", sizeof (uint64_t), SA_UINT64_ARRAY, 13}, 187 {"ZPL_PAD", sizeof (uint64_t) * 4, SA_UINT64_ARRAY, 14}, 188 {"ZPL_ZNODE_ACL", 88, SA_UINT8_ARRAY, 15}, 189 }; 190 191 /* 192 * ZPL legacy layout 193 * This is only used for objects of type DMU_OT_ZNODE 194 */ 195 sa_attr_type_t sa_legacy_zpl_layout[] = { 196 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 197 }; 198 199 /* 200 * Special dummy layout used for buffers with no attributes. 201 */ 202 203 sa_attr_type_t sa_dummy_zpl_layout[] = { 0 }; 204 205 static int sa_legacy_attr_count = 16; 206 static kmem_cache_t *sa_cache = NULL; 207 208 /*ARGSUSED*/ 209 static int 210 sa_cache_constructor(void *buf, void *unused, int kmflag) 211 { 212 sa_handle_t *hdl = buf; 213 214 hdl->sa_bonus_tab = NULL; 215 hdl->sa_spill_tab = NULL; 216 hdl->sa_os = NULL; 217 hdl->sa_userp = NULL; 218 hdl->sa_bonus = NULL; 219 hdl->sa_spill = NULL; 220 mutex_init(&hdl->sa_lock, NULL, MUTEX_DEFAULT, NULL); 221 return (0); 222 } 223 224 /*ARGSUSED*/ 225 static void 226 sa_cache_destructor(void *buf, void *unused) 227 { 228 sa_handle_t *hdl = buf; 229 mutex_destroy(&hdl->sa_lock); 230 } 231 232 void 233 sa_cache_init(void) 234 { 235 sa_cache = kmem_cache_create("sa_cache", 236 sizeof (sa_handle_t), 0, sa_cache_constructor, 237 sa_cache_destructor, NULL, NULL, NULL, 0); 238 } 239 240 void 241 sa_cache_fini(void) 242 { 243 if (sa_cache) 244 kmem_cache_destroy(sa_cache); 245 } 246 247 static int 248 layout_num_compare(const void *arg1, const void *arg2) 249 { 250 const sa_lot_t *node1 = arg1; 251 const sa_lot_t *node2 = arg2; 252 253 if (node1->lot_num > node2->lot_num) 254 return (1); 255 else if (node1->lot_num < node2->lot_num) 256 return (-1); 257 return (0); 258 } 259 260 static int 261 layout_hash_compare(const void *arg1, const void *arg2) 262 { 263 const sa_lot_t *node1 = arg1; 264 const sa_lot_t *node2 = arg2; 265 266 if (node1->lot_hash > node2->lot_hash) 267 return (1); 268 if (node1->lot_hash < node2->lot_hash) 269 return (-1); 270 if (node1->lot_instance > node2->lot_instance) 271 return (1); 272 if (node1->lot_instance < node2->lot_instance) 273 return (-1); 274 return (0); 275 } 276 277 boolean_t 278 sa_layout_equal(sa_lot_t *tbf, sa_attr_type_t *attrs, int count) 279 { 280 int i; 281 282 if (count != tbf->lot_attr_count) 283 return (1); 284 285 for (i = 0; i != count; i++) { 286 if (attrs[i] != tbf->lot_attrs[i]) 287 return (1); 288 } 289 return (0); 290 } 291 292 #define SA_ATTR_HASH(attr) (zfs_crc64_table[(-1ULL ^ attr) & 0xFF]) 293 294 static uint64_t 295 sa_layout_info_hash(sa_attr_type_t *attrs, int attr_count) 296 { 297 int i; 298 uint64_t crc = -1ULL; 299 300 for (i = 0; i != attr_count; i++) 301 crc ^= SA_ATTR_HASH(attrs[i]); 302 303 return (crc); 304 } 305 306 static int 307 sa_get_spill(sa_handle_t *hdl) 308 { 309 int rc; 310 if (hdl->sa_spill == NULL) { 311 if ((rc = dmu_spill_hold_existing(hdl->sa_bonus, NULL, 312 &hdl->sa_spill)) == 0) 313 VERIFY(0 == sa_build_index(hdl, SA_SPILL)); 314 } else { 315 rc = 0; 316 } 317 318 return (rc); 319 } 320 321 /* 322 * Main attribute lookup/update function 323 * returns 0 for success or non zero for failures 324 * 325 * Operates on bulk array, first failure will abort further processing 326 */ 327 int 328 sa_attr_op(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count, 329 sa_data_op_t data_op, dmu_tx_t *tx) 330 { 331 sa_os_t *sa = hdl->sa_os->os_sa; 332 int i; 333 int error = 0; 334 sa_buf_type_t buftypes; 335 336 buftypes = 0; 337 338 ASSERT(count > 0); 339 for (i = 0; i != count; i++) { 340 ASSERT(bulk[i].sa_attr <= hdl->sa_os->os_sa->sa_num_attrs); 341 342 bulk[i].sa_addr = NULL; 343 /* First check the bonus buffer */ 344 345 if (hdl->sa_bonus_tab && TOC_ATTR_PRESENT( 346 hdl->sa_bonus_tab->sa_idx_tab[bulk[i].sa_attr])) { 347 SA_ATTR_INFO(sa, hdl->sa_bonus_tab, 348 SA_GET_HDR(hdl, SA_BONUS), 349 bulk[i].sa_attr, bulk[i], SA_BONUS, hdl); 350 if (tx && !(buftypes & SA_BONUS)) { 351 dmu_buf_will_dirty(hdl->sa_bonus, tx); 352 buftypes |= SA_BONUS; 353 } 354 } 355 if (bulk[i].sa_addr == NULL && 356 ((error = sa_get_spill(hdl)) == 0)) { 357 if (TOC_ATTR_PRESENT( 358 hdl->sa_spill_tab->sa_idx_tab[bulk[i].sa_attr])) { 359 SA_ATTR_INFO(sa, hdl->sa_spill_tab, 360 SA_GET_HDR(hdl, SA_SPILL), 361 bulk[i].sa_attr, bulk[i], SA_SPILL, hdl); 362 if (tx && !(buftypes & SA_SPILL) && 363 bulk[i].sa_size == bulk[i].sa_length) { 364 dmu_buf_will_dirty(hdl->sa_spill, tx); 365 buftypes |= SA_SPILL; 366 } 367 } 368 } 369 if (error && error != ENOENT) { 370 return ((error == ECKSUM) ? EIO : error); 371 } 372 373 switch (data_op) { 374 case SA_LOOKUP: 375 if (bulk[i].sa_addr == NULL) 376 return (ENOENT); 377 if (bulk[i].sa_data) { 378 SA_COPY_DATA(bulk[i].sa_data_func, 379 bulk[i].sa_addr, bulk[i].sa_data, 380 bulk[i].sa_size); 381 } 382 continue; 383 384 case SA_UPDATE: 385 /* existing rewrite of attr */ 386 if (bulk[i].sa_addr && 387 bulk[i].sa_size == bulk[i].sa_length) { 388 SA_COPY_DATA(bulk[i].sa_data_func, 389 bulk[i].sa_data, bulk[i].sa_addr, 390 bulk[i].sa_length); 391 continue; 392 } else if (bulk[i].sa_addr) { /* attr size change */ 393 error = sa_modify_attrs(hdl, bulk[i].sa_attr, 394 SA_REPLACE, bulk[i].sa_data_func, 395 bulk[i].sa_data, bulk[i].sa_length, tx); 396 } else { /* adding new attribute */ 397 error = sa_modify_attrs(hdl, bulk[i].sa_attr, 398 SA_ADD, bulk[i].sa_data_func, 399 bulk[i].sa_data, bulk[i].sa_length, tx); 400 } 401 if (error) 402 return (error); 403 break; 404 } 405 } 406 return (error); 407 } 408 409 static sa_lot_t * 410 sa_add_layout_entry(objset_t *os, sa_attr_type_t *attrs, int attr_count, 411 uint64_t lot_num, uint64_t hash, boolean_t zapadd, dmu_tx_t *tx) 412 { 413 sa_os_t *sa = os->os_sa; 414 sa_lot_t *tb, *findtb; 415 int i; 416 avl_index_t loc; 417 418 ASSERT(MUTEX_HELD(&sa->sa_lock)); 419 tb = kmem_zalloc(sizeof (sa_lot_t), KM_SLEEP); 420 tb->lot_attr_count = attr_count; 421 tb->lot_attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count, 422 KM_SLEEP); 423 bcopy(attrs, tb->lot_attrs, sizeof (sa_attr_type_t) * attr_count); 424 tb->lot_num = lot_num; 425 tb->lot_hash = hash; 426 tb->lot_instance = 0; 427 428 if (zapadd) { 429 char attr_name[8]; 430 431 if (sa->sa_layout_attr_obj == 0) { 432 sa->sa_layout_attr_obj = zap_create_link(os, 433 DMU_OT_SA_ATTR_LAYOUTS, 434 sa->sa_master_obj, SA_LAYOUTS, tx); 435 } 436 437 (void) snprintf(attr_name, sizeof (attr_name), 438 "%d", (int)lot_num); 439 VERIFY(0 == zap_update(os, os->os_sa->sa_layout_attr_obj, 440 attr_name, 2, attr_count, attrs, tx)); 441 } 442 443 list_create(&tb->lot_idx_tab, sizeof (sa_idx_tab_t), 444 offsetof(sa_idx_tab_t, sa_next)); 445 446 for (i = 0; i != attr_count; i++) { 447 if (sa->sa_attr_table[tb->lot_attrs[i]].sa_length == 0) 448 tb->lot_var_sizes++; 449 } 450 451 avl_add(&sa->sa_layout_num_tree, tb); 452 453 /* verify we don't have a hash collision */ 454 if ((findtb = avl_find(&sa->sa_layout_hash_tree, tb, &loc)) != NULL) { 455 for (; findtb && findtb->lot_hash == hash; 456 findtb = AVL_NEXT(&sa->sa_layout_hash_tree, findtb)) { 457 if (findtb->lot_instance != tb->lot_instance) 458 break; 459 tb->lot_instance++; 460 } 461 } 462 avl_add(&sa->sa_layout_hash_tree, tb); 463 return (tb); 464 } 465 466 static void 467 sa_find_layout(objset_t *os, uint64_t hash, sa_attr_type_t *attrs, 468 int count, dmu_tx_t *tx, sa_lot_t **lot) 469 { 470 sa_lot_t *tb, tbsearch; 471 avl_index_t loc; 472 sa_os_t *sa = os->os_sa; 473 boolean_t found = B_FALSE; 474 475 mutex_enter(&sa->sa_lock); 476 tbsearch.lot_hash = hash; 477 tbsearch.lot_instance = 0; 478 tb = avl_find(&sa->sa_layout_hash_tree, &tbsearch, &loc); 479 if (tb) { 480 for (; tb && tb->lot_hash == hash; 481 tb = AVL_NEXT(&sa->sa_layout_hash_tree, tb)) { 482 if (sa_layout_equal(tb, attrs, count) == 0) { 483 found = B_TRUE; 484 break; 485 } 486 } 487 } 488 if (!found) { 489 tb = sa_add_layout_entry(os, attrs, count, 490 avl_numnodes(&sa->sa_layout_num_tree), hash, B_TRUE, tx); 491 } 492 mutex_exit(&sa->sa_lock); 493 *lot = tb; 494 } 495 496 static int 497 sa_resize_spill(sa_handle_t *hdl, uint32_t size, dmu_tx_t *tx) 498 { 499 int error; 500 uint32_t blocksize; 501 502 if (size == 0) { 503 blocksize = SPA_MINBLOCKSIZE; 504 } else if (size > SPA_MAXBLOCKSIZE) { 505 ASSERT(0); 506 return (EFBIG); 507 } else { 508 blocksize = P2ROUNDUP_TYPED(size, SPA_MINBLOCKSIZE, uint32_t); 509 } 510 511 error = dbuf_spill_set_blksz(hdl->sa_spill, blocksize, tx); 512 ASSERT(error == 0); 513 return (error); 514 } 515 516 static void 517 sa_copy_data(sa_data_locator_t *func, void *datastart, void *target, int buflen) 518 { 519 if (func == NULL) { 520 bcopy(datastart, target, buflen); 521 } else { 522 boolean_t start; 523 int bytes; 524 void *dataptr; 525 void *saptr = target; 526 uint32_t length; 527 528 start = B_TRUE; 529 bytes = 0; 530 while (bytes < buflen) { 531 func(&dataptr, &length, buflen, start, datastart); 532 bcopy(dataptr, saptr, length); 533 saptr = (void *)((caddr_t)saptr + length); 534 bytes += length; 535 start = B_FALSE; 536 } 537 } 538 } 539 540 /* 541 * Determine several different sizes 542 * first the sa header size 543 * the number of bytes to be stored 544 * if spill would occur the index in the attribute array is returned 545 * 546 * the boolean will_spill will be set when spilling is necessary. It 547 * is only set when the buftype is SA_BONUS 548 */ 549 static int 550 sa_find_sizes(sa_os_t *sa, sa_bulk_attr_t *attr_desc, int attr_count, 551 dmu_buf_t *db, sa_buf_type_t buftype, int *index, int *total, 552 boolean_t *will_spill) 553 { 554 int var_size = 0; 555 int i; 556 int full_space; 557 int hdrsize; 558 boolean_t done = B_FALSE; 559 560 if (buftype == SA_BONUS && sa->sa_force_spill) { 561 *total = 0; 562 *index = 0; 563 *will_spill = B_TRUE; 564 return (0); 565 } 566 567 *index = -1; 568 *total = 0; 569 570 if (buftype == SA_BONUS) 571 *will_spill = B_FALSE; 572 573 hdrsize = (SA_BONUSTYPE_FROM_DB(db) == DMU_OT_ZNODE) ? 0 : 574 sizeof (sa_hdr_phys_t); 575 576 full_space = (buftype == SA_BONUS) ? DN_MAX_BONUSLEN : db->db_size; 577 578 for (i = 0; i != attr_count; i++) { 579 boolean_t is_var_sz; 580 581 *total += attr_desc[i].sa_length; 582 if (done) 583 goto next; 584 585 is_var_sz = (SA_REGISTERED_LEN(sa, attr_desc[i].sa_attr) == 0); 586 if (is_var_sz) { 587 var_size++; 588 } 589 590 if (is_var_sz && var_size > 1) { 591 if (P2ROUNDUP(hdrsize + sizeof (uint16_t), 8) + 592 *total < full_space) { 593 hdrsize += sizeof (uint16_t); 594 } else { 595 done = B_TRUE; 596 *index = i; 597 if (buftype == SA_BONUS) 598 *will_spill = B_TRUE; 599 continue; 600 } 601 } 602 603 /* 604 * find index of where spill *could* occur. 605 * Then continue to count of remainder attribute 606 * space. The sum is used later for sizing bonus 607 * and spill buffer. 608 */ 609 if (buftype == SA_BONUS && *index == -1 && 610 *total + P2ROUNDUP(hdrsize, 8) > 611 (full_space - sizeof (blkptr_t))) { 612 *index = i; 613 done = B_TRUE; 614 } 615 616 next: 617 if (*total + P2ROUNDUP(hdrsize, 8) > full_space && 618 buftype == SA_BONUS) 619 *will_spill = B_TRUE; 620 } 621 622 hdrsize = P2ROUNDUP(hdrsize, 8); 623 return (hdrsize); 624 } 625 626 #define BUF_SPACE_NEEDED(total, header) (total + header) 627 628 /* 629 * Find layout that corresponds to ordering of attributes 630 * If not found a new layout number is created and added to 631 * persistent layout tables. 632 */ 633 static int 634 sa_build_layouts(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, int attr_count, 635 dmu_tx_t *tx) 636 { 637 sa_os_t *sa = hdl->sa_os->os_sa; 638 uint64_t hash; 639 sa_buf_type_t buftype; 640 sa_hdr_phys_t *sahdr; 641 void *data_start; 642 int buf_space; 643 sa_attr_type_t *attrs, *attrs_start; 644 int i, lot_count; 645 int hdrsize, spillhdrsize; 646 int used; 647 dmu_object_type_t bonustype; 648 sa_lot_t *lot; 649 int len_idx; 650 int spill_used; 651 boolean_t spilling; 652 653 dmu_buf_will_dirty(hdl->sa_bonus, tx); 654 bonustype = SA_BONUSTYPE_FROM_DB(hdl->sa_bonus); 655 656 /* first determine bonus header size and sum of all attributes */ 657 hdrsize = sa_find_sizes(sa, attr_desc, attr_count, hdl->sa_bonus, 658 SA_BONUS, &i, &used, &spilling); 659 660 if (used > SPA_MAXBLOCKSIZE) 661 return (EFBIG); 662 663 VERIFY(0 == dmu_set_bonus(hdl->sa_bonus, spilling ? 664 MIN(DN_MAX_BONUSLEN - sizeof (blkptr_t), used + hdrsize) : 665 used + hdrsize, tx)); 666 667 ASSERT((bonustype == DMU_OT_ZNODE && spilling == 0) || 668 bonustype == DMU_OT_SA); 669 670 /* setup and size spill buffer when needed */ 671 if (spilling) { 672 boolean_t dummy; 673 674 if (hdl->sa_spill == NULL) { 675 VERIFY(dmu_spill_hold_by_bonus(hdl->sa_bonus, NULL, 676 &hdl->sa_spill) == 0); 677 } 678 dmu_buf_will_dirty(hdl->sa_spill, tx); 679 680 spillhdrsize = sa_find_sizes(sa, &attr_desc[i], 681 attr_count - i, hdl->sa_spill, SA_SPILL, &i, 682 &spill_used, &dummy); 683 684 if (spill_used > SPA_MAXBLOCKSIZE) 685 return (EFBIG); 686 687 buf_space = hdl->sa_spill->db_size - spillhdrsize; 688 if (BUF_SPACE_NEEDED(spill_used, spillhdrsize) > 689 hdl->sa_spill->db_size) 690 VERIFY(0 == sa_resize_spill(hdl, 691 BUF_SPACE_NEEDED(spill_used, spillhdrsize), tx)); 692 } 693 694 /* setup starting pointers to lay down data */ 695 data_start = (void *)((uintptr_t)hdl->sa_bonus->db_data + hdrsize); 696 sahdr = (sa_hdr_phys_t *)hdl->sa_bonus->db_data; 697 buftype = SA_BONUS; 698 699 if (spilling) 700 buf_space = (sa->sa_force_spill) ? 701 0 : SA_BLKPTR_SPACE - hdrsize; 702 else 703 buf_space = hdl->sa_bonus->db_size - hdrsize; 704 705 attrs_start = attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count, 706 KM_SLEEP); 707 lot_count = 0; 708 709 for (i = 0, len_idx = 0, hash = -1ULL; i != attr_count; i++) { 710 uint16_t length; 711 712 attrs[i] = attr_desc[i].sa_attr; 713 length = SA_REGISTERED_LEN(sa, attrs[i]); 714 if (length == 0) 715 length = attr_desc[i].sa_length; 716 717 if (buf_space < length) { /* switch to spill buffer */ 718 VERIFY(bonustype == DMU_OT_SA); 719 if (buftype == SA_BONUS && !sa->sa_force_spill) { 720 sa_find_layout(hdl->sa_os, hash, attrs_start, 721 lot_count, tx, &lot); 722 SA_SET_HDR(sahdr, lot->lot_num, hdrsize); 723 } 724 725 buftype = SA_SPILL; 726 hash = -1ULL; 727 len_idx = 0; 728 729 sahdr = (sa_hdr_phys_t *)hdl->sa_spill->db_data; 730 sahdr->sa_magic = SA_MAGIC; 731 data_start = (void *)((uintptr_t)sahdr + 732 spillhdrsize); 733 attrs_start = &attrs[i]; 734 buf_space = hdl->sa_spill->db_size - spillhdrsize; 735 lot_count = 0; 736 } 737 hash ^= SA_ATTR_HASH(attrs[i]); 738 attr_desc[i].sa_addr = data_start; 739 attr_desc[i].sa_size = length; 740 SA_COPY_DATA(attr_desc[i].sa_data_func, attr_desc[i].sa_data, 741 data_start, length); 742 if (sa->sa_attr_table[attrs[i]].sa_length == 0) { 743 sahdr->sa_lengths[len_idx++] = length; 744 } 745 data_start = (void *)P2ROUNDUP(((uintptr_t)data_start + 746 length), 8); 747 buf_space -= P2ROUNDUP(length, 8); 748 lot_count++; 749 } 750 751 sa_find_layout(hdl->sa_os, hash, attrs_start, lot_count, tx, &lot); 752 753 /* 754 * Verify that old znodes always have layout number 0. 755 * Must be DMU_OT_SA for arbitrary layouts 756 */ 757 VERIFY((bonustype == DMU_OT_ZNODE && lot->lot_num == 0) || 758 (bonustype == DMU_OT_SA && lot->lot_num > 1)); 759 760 if (bonustype == DMU_OT_SA) { 761 SA_SET_HDR(sahdr, lot->lot_num, 762 buftype == SA_BONUS ? hdrsize : spillhdrsize); 763 } 764 765 kmem_free(attrs, sizeof (sa_attr_type_t) * attr_count); 766 if (hdl->sa_bonus_tab) { 767 sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab); 768 hdl->sa_bonus_tab = NULL; 769 } 770 if (!sa->sa_force_spill) 771 VERIFY(0 == sa_build_index(hdl, SA_BONUS)); 772 if (hdl->sa_spill) { 773 sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab); 774 if (!spilling) { 775 /* 776 * remove spill block that is no longer needed. 777 */ 778 dmu_buf_rele(hdl->sa_spill, NULL); 779 hdl->sa_spill = NULL; 780 hdl->sa_spill_tab = NULL; 781 VERIFY(0 == dmu_rm_spill(hdl->sa_os, 782 sa_handle_object(hdl), tx)); 783 } else { 784 VERIFY(0 == sa_build_index(hdl, SA_SPILL)); 785 } 786 } 787 788 return (0); 789 } 790 791 static void 792 sa_free_attr_table(sa_os_t *sa) 793 { 794 int i; 795 796 if (sa->sa_attr_table == NULL) 797 return; 798 799 for (i = 0; i != sa->sa_num_attrs; i++) { 800 if (sa->sa_attr_table[i].sa_name) 801 kmem_free(sa->sa_attr_table[i].sa_name, 802 strlen(sa->sa_attr_table[i].sa_name) + 1); 803 } 804 805 kmem_free(sa->sa_attr_table, 806 sizeof (sa_attr_table_t) * sa->sa_num_attrs); 807 808 sa->sa_attr_table = NULL; 809 } 810 811 static int 812 sa_attr_table_setup(objset_t *os, sa_attr_reg_t *reg_attrs, int count) 813 { 814 sa_os_t *sa = os->os_sa; 815 uint64_t sa_attr_count = 0; 816 uint64_t sa_reg_count; 817 int error = 0; 818 uint64_t attr_value; 819 sa_attr_table_t *tb; 820 zap_cursor_t zc; 821 zap_attribute_t za; 822 int registered_count = 0; 823 int i; 824 dmu_objset_type_t ostype = dmu_objset_type(os); 825 826 sa->sa_user_table = 827 kmem_zalloc(count * sizeof (sa_attr_type_t), KM_SLEEP); 828 sa->sa_user_table_sz = count * sizeof (sa_attr_type_t); 829 830 if (sa->sa_reg_attr_obj != 0) { 831 error = zap_count(os, sa->sa_reg_attr_obj, 832 &sa_attr_count); 833 834 /* 835 * Make sure we retrieved a count and that it isn't zero 836 */ 837 if (error || (error == 0 && sa_attr_count == 0)) { 838 if (error == 0) 839 error = EINVAL; 840 goto bail; 841 } 842 sa_reg_count = sa_attr_count; 843 } 844 845 if (ostype == DMU_OST_ZFS && sa_attr_count == 0) 846 sa_attr_count += sa_legacy_attr_count; 847 848 /* Allocate attribute numbers for attributes that aren't registered */ 849 for (i = 0; i != count; i++) { 850 boolean_t found = B_FALSE; 851 int j; 852 853 if (ostype == DMU_OST_ZFS) { 854 for (j = 0; j != sa_legacy_attr_count; j++) { 855 if (strcmp(reg_attrs[i].sa_name, 856 sa_legacy_attrs[j].sa_name) == 0) { 857 sa->sa_user_table[i] = 858 sa_legacy_attrs[j].sa_attr; 859 found = B_TRUE; 860 } 861 } 862 } 863 if (found) 864 continue; 865 866 if (sa->sa_reg_attr_obj) 867 error = zap_lookup(os, sa->sa_reg_attr_obj, 868 reg_attrs[i].sa_name, 8, 1, &attr_value); 869 else 870 error = ENOENT; 871 switch (error) { 872 case ENOENT: 873 sa->sa_user_table[i] = (sa_attr_type_t)sa_attr_count; 874 sa_attr_count++; 875 break; 876 case 0: 877 sa->sa_user_table[i] = ATTR_NUM(attr_value); 878 break; 879 default: 880 goto bail; 881 } 882 } 883 884 sa->sa_num_attrs = sa_attr_count; 885 tb = sa->sa_attr_table = 886 kmem_zalloc(sizeof (sa_attr_table_t) * sa_attr_count, KM_SLEEP); 887 888 /* 889 * Attribute table is constructed from requested attribute list, 890 * previously foreign registered attributes, and also the legacy 891 * ZPL set of attributes. 892 */ 893 894 if (sa->sa_reg_attr_obj) { 895 for (zap_cursor_init(&zc, os, sa->sa_reg_attr_obj); 896 (error = zap_cursor_retrieve(&zc, &za)) == 0; 897 zap_cursor_advance(&zc)) { 898 uint64_t value; 899 value = za.za_first_integer; 900 901 registered_count++; 902 tb[ATTR_NUM(value)].sa_attr = ATTR_NUM(value); 903 tb[ATTR_NUM(value)].sa_length = ATTR_LENGTH(value); 904 tb[ATTR_NUM(value)].sa_byteswap = ATTR_BSWAP(value); 905 tb[ATTR_NUM(value)].sa_registered = B_TRUE; 906 907 if (tb[ATTR_NUM(value)].sa_name) { 908 continue; 909 } 910 tb[ATTR_NUM(value)].sa_name = 911 kmem_zalloc(strlen(za.za_name) +1, KM_SLEEP); 912 (void) strlcpy(tb[ATTR_NUM(value)].sa_name, za.za_name, 913 strlen(za.za_name) +1); 914 } 915 zap_cursor_fini(&zc); 916 /* 917 * Make sure we processed the correct number of registered 918 * attributes 919 */ 920 if (registered_count != sa_reg_count) { 921 ASSERT(error != 0); 922 goto bail; 923 } 924 925 } 926 927 if (ostype == DMU_OST_ZFS) { 928 for (i = 0; i != sa_legacy_attr_count; i++) { 929 if (tb[i].sa_name) 930 continue; 931 tb[i].sa_attr = sa_legacy_attrs[i].sa_attr; 932 tb[i].sa_length = sa_legacy_attrs[i].sa_length; 933 tb[i].sa_byteswap = sa_legacy_attrs[i].sa_byteswap; 934 tb[i].sa_registered = B_FALSE; 935 tb[i].sa_name = 936 kmem_zalloc(strlen(sa_legacy_attrs[i].sa_name) +1, 937 KM_SLEEP); 938 (void) strlcpy(tb[i].sa_name, 939 sa_legacy_attrs[i].sa_name, 940 strlen(sa_legacy_attrs[i].sa_name) + 1); 941 } 942 } 943 944 for (i = 0; i != count; i++) { 945 sa_attr_type_t attr_id; 946 947 attr_id = sa->sa_user_table[i]; 948 if (tb[attr_id].sa_name) 949 continue; 950 951 tb[attr_id].sa_length = reg_attrs[i].sa_length; 952 tb[attr_id].sa_byteswap = reg_attrs[i].sa_byteswap; 953 tb[attr_id].sa_attr = attr_id; 954 tb[attr_id].sa_name = 955 kmem_zalloc(strlen(reg_attrs[i].sa_name) + 1, KM_SLEEP); 956 (void) strlcpy(tb[attr_id].sa_name, reg_attrs[i].sa_name, 957 strlen(reg_attrs[i].sa_name) + 1); 958 } 959 960 sa->sa_need_attr_registration = 961 (sa_attr_count != registered_count); 962 963 return (0); 964 bail: 965 kmem_free(sa->sa_user_table, count * sizeof (sa_attr_type_t)); 966 sa->sa_user_table = NULL; 967 sa_free_attr_table(sa); 968 return ((error != 0) ? error : EINVAL); 969 } 970 971 int 972 sa_setup(objset_t *os, uint64_t sa_obj, sa_attr_reg_t *reg_attrs, int count, 973 sa_attr_type_t **user_table) 974 { 975 zap_cursor_t zc; 976 zap_attribute_t za; 977 sa_os_t *sa; 978 dmu_objset_type_t ostype = dmu_objset_type(os); 979 sa_attr_type_t *tb; 980 int error; 981 982 mutex_enter(&os->os_lock); 983 if (os->os_sa) { 984 mutex_enter(&os->os_sa->sa_lock); 985 mutex_exit(&os->os_lock); 986 tb = os->os_sa->sa_user_table; 987 mutex_exit(&os->os_sa->sa_lock); 988 *user_table = tb; 989 return (0); 990 } 991 992 sa = kmem_zalloc(sizeof (sa_os_t), KM_SLEEP); 993 mutex_init(&sa->sa_lock, NULL, MUTEX_DEFAULT, NULL); 994 sa->sa_master_obj = sa_obj; 995 996 os->os_sa = sa; 997 mutex_enter(&sa->sa_lock); 998 mutex_exit(&os->os_lock); 999 avl_create(&sa->sa_layout_num_tree, layout_num_compare, 1000 sizeof (sa_lot_t), offsetof(sa_lot_t, lot_num_node)); 1001 avl_create(&sa->sa_layout_hash_tree, layout_hash_compare, 1002 sizeof (sa_lot_t), offsetof(sa_lot_t, lot_hash_node)); 1003 1004 if (sa_obj) { 1005 error = zap_lookup(os, sa_obj, SA_LAYOUTS, 1006 8, 1, &sa->sa_layout_attr_obj); 1007 if (error != 0 && error != ENOENT) 1008 goto fail; 1009 error = zap_lookup(os, sa_obj, SA_REGISTRY, 1010 8, 1, &sa->sa_reg_attr_obj); 1011 if (error != 0 && error != ENOENT) 1012 goto fail; 1013 } 1014 1015 if ((error = sa_attr_table_setup(os, reg_attrs, count)) != 0) 1016 goto fail; 1017 1018 if (sa->sa_layout_attr_obj != 0) { 1019 uint64_t layout_count; 1020 1021 error = zap_count(os, sa->sa_layout_attr_obj, 1022 &layout_count); 1023 1024 /* 1025 * Layout number count should be > 0 1026 */ 1027 if (error || (error == 0 && layout_count == 0)) { 1028 if (error == 0) 1029 error = EINVAL; 1030 goto fail; 1031 } 1032 1033 for (zap_cursor_init(&zc, os, sa->sa_layout_attr_obj); 1034 (error = zap_cursor_retrieve(&zc, &za)) == 0; 1035 zap_cursor_advance(&zc)) { 1036 sa_attr_type_t *lot_attrs; 1037 uint64_t lot_num; 1038 1039 lot_attrs = kmem_zalloc(sizeof (sa_attr_type_t) * 1040 za.za_num_integers, KM_SLEEP); 1041 1042 if ((error = (zap_lookup(os, sa->sa_layout_attr_obj, 1043 za.za_name, 2, za.za_num_integers, 1044 lot_attrs))) != 0) { 1045 kmem_free(lot_attrs, sizeof (sa_attr_type_t) * 1046 za.za_num_integers); 1047 break; 1048 } 1049 VERIFY(ddi_strtoull(za.za_name, NULL, 10, 1050 (unsigned long long *)&lot_num) == 0); 1051 1052 (void) sa_add_layout_entry(os, lot_attrs, 1053 za.za_num_integers, lot_num, 1054 sa_layout_info_hash(lot_attrs, 1055 za.za_num_integers), B_FALSE, NULL); 1056 kmem_free(lot_attrs, sizeof (sa_attr_type_t) * 1057 za.za_num_integers); 1058 } 1059 zap_cursor_fini(&zc); 1060 1061 /* 1062 * Make sure layout count matches number of entries added 1063 * to AVL tree 1064 */ 1065 if (avl_numnodes(&sa->sa_layout_num_tree) != layout_count) { 1066 ASSERT(error != 0); 1067 goto fail; 1068 } 1069 } 1070 1071 /* Add special layout number for old ZNODES */ 1072 if (ostype == DMU_OST_ZFS) { 1073 (void) sa_add_layout_entry(os, sa_legacy_zpl_layout, 1074 sa_legacy_attr_count, 0, 1075 sa_layout_info_hash(sa_legacy_zpl_layout, 1076 sa_legacy_attr_count), B_FALSE, NULL); 1077 1078 (void) sa_add_layout_entry(os, sa_dummy_zpl_layout, 0, 1, 1079 0, B_FALSE, NULL); 1080 } 1081 *user_table = os->os_sa->sa_user_table; 1082 mutex_exit(&sa->sa_lock); 1083 return (0); 1084 fail: 1085 os->os_sa = NULL; 1086 sa_free_attr_table(sa); 1087 if (sa->sa_user_table) 1088 kmem_free(sa->sa_user_table, sa->sa_user_table_sz); 1089 mutex_exit(&sa->sa_lock); 1090 kmem_free(sa, sizeof (sa_os_t)); 1091 return ((error == ECKSUM) ? EIO : error); 1092 } 1093 1094 void 1095 sa_tear_down(objset_t *os) 1096 { 1097 sa_os_t *sa = os->os_sa; 1098 sa_lot_t *layout; 1099 void *cookie; 1100 1101 kmem_free(sa->sa_user_table, sa->sa_user_table_sz); 1102 1103 /* Free up attr table */ 1104 1105 sa_free_attr_table(sa); 1106 1107 cookie = NULL; 1108 while (layout = avl_destroy_nodes(&sa->sa_layout_hash_tree, &cookie)) { 1109 sa_idx_tab_t *tab; 1110 while (tab = list_head(&layout->lot_idx_tab)) { 1111 ASSERT(refcount_count(&tab->sa_refcount)); 1112 sa_idx_tab_rele(os, tab); 1113 } 1114 } 1115 1116 cookie = NULL; 1117 while (layout = avl_destroy_nodes(&sa->sa_layout_num_tree, &cookie)) { 1118 kmem_free(layout->lot_attrs, 1119 sizeof (sa_attr_type_t) * layout->lot_attr_count); 1120 kmem_free(layout, sizeof (sa_lot_t)); 1121 } 1122 1123 avl_destroy(&sa->sa_layout_hash_tree); 1124 avl_destroy(&sa->sa_layout_num_tree); 1125 1126 kmem_free(sa, sizeof (sa_os_t)); 1127 os->os_sa = NULL; 1128 } 1129 1130 void 1131 sa_build_idx_tab(void *hdr, void *attr_addr, sa_attr_type_t attr, 1132 uint16_t length, int length_idx, boolean_t var_length, void *userp) 1133 { 1134 sa_idx_tab_t *idx_tab = userp; 1135 1136 if (var_length) { 1137 ASSERT(idx_tab->sa_variable_lengths); 1138 idx_tab->sa_variable_lengths[length_idx] = length; 1139 } 1140 TOC_ATTR_ENCODE(idx_tab->sa_idx_tab[attr], length_idx, 1141 (uint32_t)((uintptr_t)attr_addr - (uintptr_t)hdr)); 1142 } 1143 1144 static void 1145 sa_attr_iter(objset_t *os, sa_hdr_phys_t *hdr, dmu_object_type_t type, 1146 sa_iterfunc_t func, sa_lot_t *tab, void *userp) 1147 { 1148 void *data_start; 1149 sa_lot_t *tb = tab; 1150 sa_lot_t search; 1151 avl_index_t loc; 1152 sa_os_t *sa = os->os_sa; 1153 int i; 1154 uint16_t *length_start = NULL; 1155 uint8_t length_idx = 0; 1156 1157 if (tab == NULL) { 1158 search.lot_num = SA_LAYOUT_NUM(hdr, type); 1159 tb = avl_find(&sa->sa_layout_num_tree, &search, &loc); 1160 ASSERT(tb); 1161 } 1162 1163 if (IS_SA_BONUSTYPE(type)) { 1164 data_start = (void *)P2ROUNDUP(((uintptr_t)hdr + 1165 offsetof(sa_hdr_phys_t, sa_lengths) + 1166 (sizeof (uint16_t) * tb->lot_var_sizes)), 8); 1167 length_start = hdr->sa_lengths; 1168 } else { 1169 data_start = hdr; 1170 } 1171 1172 for (i = 0; i != tb->lot_attr_count; i++) { 1173 int attr_length, reg_length; 1174 uint8_t idx_len; 1175 1176 reg_length = sa->sa_attr_table[tb->lot_attrs[i]].sa_length; 1177 if (reg_length) { 1178 attr_length = reg_length; 1179 idx_len = 0; 1180 } else { 1181 attr_length = length_start[length_idx]; 1182 idx_len = length_idx++; 1183 } 1184 1185 func(hdr, data_start, tb->lot_attrs[i], attr_length, 1186 idx_len, reg_length == 0 ? B_TRUE : B_FALSE, userp); 1187 1188 data_start = (void *)P2ROUNDUP(((uintptr_t)data_start + 1189 attr_length), 8); 1190 } 1191 } 1192 1193 /*ARGSUSED*/ 1194 void 1195 sa_byteswap_cb(void *hdr, void *attr_addr, sa_attr_type_t attr, 1196 uint16_t length, int length_idx, boolean_t variable_length, void *userp) 1197 { 1198 sa_handle_t *hdl = userp; 1199 sa_os_t *sa = hdl->sa_os->os_sa; 1200 1201 sa_bswap_table[sa->sa_attr_table[attr].sa_byteswap](attr_addr, length); 1202 } 1203 1204 void 1205 sa_byteswap(sa_handle_t *hdl, sa_buf_type_t buftype) 1206 { 1207 sa_hdr_phys_t *sa_hdr_phys = SA_GET_HDR(hdl, buftype); 1208 dmu_buf_impl_t *db; 1209 sa_os_t *sa = hdl->sa_os->os_sa; 1210 int num_lengths = 1; 1211 int i; 1212 1213 ASSERT(MUTEX_HELD(&sa->sa_lock)); 1214 if (sa_hdr_phys->sa_magic == SA_MAGIC) 1215 return; 1216 1217 db = SA_GET_DB(hdl, buftype); 1218 1219 if (buftype == SA_SPILL) { 1220 arc_release(db->db_buf, NULL); 1221 arc_buf_thaw(db->db_buf); 1222 } 1223 1224 sa_hdr_phys->sa_magic = BSWAP_32(sa_hdr_phys->sa_magic); 1225 sa_hdr_phys->sa_layout_info = BSWAP_16(sa_hdr_phys->sa_layout_info); 1226 1227 /* 1228 * Determine number of variable lenghts in header 1229 * The standard 8 byte header has one for free and a 1230 * 16 byte header would have 4 + 1; 1231 */ 1232 if (SA_HDR_SIZE(sa_hdr_phys) > 8) 1233 num_lengths += (SA_HDR_SIZE(sa_hdr_phys) - 8) >> 1; 1234 for (i = 0; i != num_lengths; i++) 1235 sa_hdr_phys->sa_lengths[i] = 1236 BSWAP_16(sa_hdr_phys->sa_lengths[i]); 1237 1238 sa_attr_iter(hdl->sa_os, sa_hdr_phys, DMU_OT_SA, 1239 sa_byteswap_cb, NULL, hdl); 1240 1241 if (buftype == SA_SPILL) 1242 arc_buf_freeze(((dmu_buf_impl_t *)hdl->sa_spill)->db_buf); 1243 } 1244 1245 static int 1246 sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype) 1247 { 1248 sa_hdr_phys_t *sa_hdr_phys; 1249 dmu_buf_impl_t *db = SA_GET_DB(hdl, buftype); 1250 dmu_object_type_t bonustype = SA_BONUSTYPE_FROM_DB(db); 1251 sa_os_t *sa = hdl->sa_os->os_sa; 1252 sa_idx_tab_t *idx_tab; 1253 1254 sa_hdr_phys = SA_GET_HDR(hdl, buftype); 1255 1256 mutex_enter(&sa->sa_lock); 1257 1258 /* Do we need to byteswap? */ 1259 1260 /* only check if not old znode */ 1261 if (IS_SA_BONUSTYPE(bonustype) && sa_hdr_phys->sa_magic != SA_MAGIC && 1262 sa_hdr_phys->sa_magic != 0) { 1263 VERIFY(BSWAP_32(sa_hdr_phys->sa_magic) == SA_MAGIC); 1264 sa_byteswap(hdl, buftype); 1265 } 1266 1267 idx_tab = sa_find_idx_tab(hdl->sa_os, bonustype, sa_hdr_phys); 1268 1269 if (buftype == SA_BONUS) 1270 hdl->sa_bonus_tab = idx_tab; 1271 else 1272 hdl->sa_spill_tab = idx_tab; 1273 1274 mutex_exit(&sa->sa_lock); 1275 return (0); 1276 } 1277 1278 /*ARGSUSED*/ 1279 void 1280 sa_evict(dmu_buf_t *db, void *sap) 1281 { 1282 panic("evicting sa dbuf %p\n", (void *)db); 1283 } 1284 1285 static void 1286 sa_idx_tab_rele(objset_t *os, void *arg) 1287 { 1288 sa_os_t *sa = os->os_sa; 1289 sa_idx_tab_t *idx_tab = arg; 1290 1291 if (idx_tab == NULL) 1292 return; 1293 1294 mutex_enter(&sa->sa_lock); 1295 if (refcount_remove(&idx_tab->sa_refcount, NULL) == 0) { 1296 list_remove(&idx_tab->sa_layout->lot_idx_tab, idx_tab); 1297 if (idx_tab->sa_variable_lengths) 1298 kmem_free(idx_tab->sa_variable_lengths, 1299 sizeof (uint16_t) * 1300 idx_tab->sa_layout->lot_var_sizes); 1301 refcount_destroy(&idx_tab->sa_refcount); 1302 kmem_free(idx_tab->sa_idx_tab, 1303 sizeof (uint32_t) * sa->sa_num_attrs); 1304 kmem_free(idx_tab, sizeof (sa_idx_tab_t)); 1305 } 1306 mutex_exit(&sa->sa_lock); 1307 } 1308 1309 static void 1310 sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab) 1311 { 1312 sa_os_t *sa = os->os_sa; 1313 1314 ASSERT(MUTEX_HELD(&sa->sa_lock)); 1315 (void) refcount_add(&idx_tab->sa_refcount, NULL); 1316 } 1317 1318 void 1319 sa_handle_destroy(sa_handle_t *hdl) 1320 { 1321 mutex_enter(&hdl->sa_lock); 1322 (void) dmu_buf_update_user((dmu_buf_t *)hdl->sa_bonus, hdl, 1323 NULL, NULL, NULL); 1324 1325 if (hdl->sa_bonus_tab) { 1326 sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab); 1327 hdl->sa_bonus_tab = NULL; 1328 } 1329 if (hdl->sa_spill_tab) { 1330 sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab); 1331 hdl->sa_spill_tab = NULL; 1332 } 1333 1334 dmu_buf_rele(hdl->sa_bonus, NULL); 1335 1336 if (hdl->sa_spill) 1337 dmu_buf_rele((dmu_buf_t *)hdl->sa_spill, NULL); 1338 mutex_exit(&hdl->sa_lock); 1339 1340 kmem_cache_free(sa_cache, hdl); 1341 } 1342 1343 int 1344 sa_handle_get_from_db(objset_t *os, dmu_buf_t *db, void *userp, 1345 sa_handle_type_t hdl_type, sa_handle_t **handlepp) 1346 { 1347 int error = 0; 1348 dmu_object_info_t doi; 1349 sa_handle_t *handle; 1350 1351 #ifdef ZFS_DEBUG 1352 dmu_object_info_from_db(db, &doi); 1353 ASSERT(doi.doi_bonus_type == DMU_OT_SA || 1354 doi.doi_bonus_type == DMU_OT_ZNODE); 1355 #endif 1356 /* find handle, if it exists */ 1357 /* if one doesn't exist then create a new one, and initialize it */ 1358 1359 handle = (hdl_type == SA_HDL_SHARED) ? dmu_buf_get_user(db) : NULL; 1360 if (handle == NULL) { 1361 sa_handle_t *newhandle; 1362 handle = kmem_cache_alloc(sa_cache, KM_SLEEP); 1363 handle->sa_userp = userp; 1364 handle->sa_bonus = db; 1365 handle->sa_os = os; 1366 handle->sa_spill = NULL; 1367 1368 error = sa_build_index(handle, SA_BONUS); 1369 newhandle = (hdl_type == SA_HDL_SHARED) ? 1370 dmu_buf_set_user_ie(db, handle, 1371 NULL, sa_evict) : NULL; 1372 1373 if (newhandle != NULL) { 1374 kmem_cache_free(sa_cache, handle); 1375 handle = newhandle; 1376 } 1377 } 1378 *handlepp = handle; 1379 1380 return (error); 1381 } 1382 1383 int 1384 sa_handle_get(objset_t *objset, uint64_t objid, void *userp, 1385 sa_handle_type_t hdl_type, sa_handle_t **handlepp) 1386 { 1387 dmu_buf_t *db; 1388 int error; 1389 1390 if (error = dmu_bonus_hold(objset, objid, NULL, &db)) 1391 return (error); 1392 1393 return (sa_handle_get_from_db(objset, db, userp, hdl_type, 1394 handlepp)); 1395 } 1396 1397 int 1398 sa_buf_hold(objset_t *objset, uint64_t obj_num, void *tag, dmu_buf_t **db) 1399 { 1400 return (dmu_bonus_hold(objset, obj_num, tag, db)); 1401 } 1402 1403 void 1404 sa_buf_rele(dmu_buf_t *db, void *tag) 1405 { 1406 dmu_buf_rele(db, tag); 1407 } 1408 1409 int 1410 sa_lookup_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count) 1411 { 1412 ASSERT(hdl); 1413 ASSERT(MUTEX_HELD(&hdl->sa_lock)); 1414 return (sa_attr_op(hdl, bulk, count, SA_LOOKUP, NULL)); 1415 } 1416 1417 int 1418 sa_lookup(sa_handle_t *hdl, sa_attr_type_t attr, void *buf, uint32_t buflen) 1419 { 1420 int error; 1421 sa_bulk_attr_t bulk; 1422 1423 bulk.sa_attr = attr; 1424 bulk.sa_data = buf; 1425 bulk.sa_length = buflen; 1426 bulk.sa_data_func = NULL; 1427 1428 ASSERT(hdl); 1429 mutex_enter(&hdl->sa_lock); 1430 error = sa_lookup_impl(hdl, &bulk, 1); 1431 mutex_exit(&hdl->sa_lock); 1432 return (error); 1433 } 1434 1435 #ifdef _KERNEL 1436 int 1437 sa_lookup_uio(sa_handle_t *hdl, sa_attr_type_t attr, uio_t *uio) 1438 { 1439 int error; 1440 sa_bulk_attr_t bulk; 1441 1442 bulk.sa_data = NULL; 1443 bulk.sa_attr = attr; 1444 bulk.sa_data_func = NULL; 1445 1446 ASSERT(hdl); 1447 1448 mutex_enter(&hdl->sa_lock); 1449 if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) == 0) { 1450 error = uiomove((void *)bulk.sa_addr, MIN(bulk.sa_size, 1451 uio->uio_resid), UIO_READ, uio); 1452 } 1453 mutex_exit(&hdl->sa_lock); 1454 return (error); 1455 1456 } 1457 #endif 1458 1459 void * 1460 sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype, void *data) 1461 { 1462 sa_idx_tab_t *idx_tab; 1463 sa_hdr_phys_t *hdr = (sa_hdr_phys_t *)data; 1464 sa_os_t *sa = os->os_sa; 1465 sa_lot_t *tb, search; 1466 avl_index_t loc; 1467 1468 /* 1469 * Deterimine layout number. If SA node and header == 0 then 1470 * force the index table to the dummy "1" empty layout. 1471 * 1472 * The layout number would only be zero for a newly created file 1473 * that has not added any attributes yet, or with crypto enabled which 1474 * doesn't write any attributes to the bonus buffer. 1475 */ 1476 1477 search.lot_num = SA_LAYOUT_NUM(hdr, bonustype); 1478 1479 tb = avl_find(&sa->sa_layout_num_tree, &search, &loc); 1480 1481 /* Verify header size is consistent with layout information */ 1482 ASSERT(tb); 1483 ASSERT(IS_SA_BONUSTYPE(bonustype) && 1484 SA_HDR_SIZE_MATCH_LAYOUT(hdr, tb) || !IS_SA_BONUSTYPE(bonustype) || 1485 (IS_SA_BONUSTYPE(bonustype) && hdr->sa_layout_info == 0)); 1486 1487 /* 1488 * See if any of the already existing TOC entries can be reused? 1489 */ 1490 1491 for (idx_tab = list_head(&tb->lot_idx_tab); idx_tab; 1492 idx_tab = list_next(&tb->lot_idx_tab, idx_tab)) { 1493 boolean_t valid_idx = B_TRUE; 1494 int i; 1495 1496 if (tb->lot_var_sizes != 0 && 1497 idx_tab->sa_variable_lengths != NULL) { 1498 for (i = 0; i != tb->lot_var_sizes; i++) { 1499 if (hdr->sa_lengths[i] != 1500 idx_tab->sa_variable_lengths[i]) { 1501 valid_idx = B_FALSE; 1502 break; 1503 } 1504 } 1505 } 1506 if (valid_idx) { 1507 sa_idx_tab_hold(os, idx_tab); 1508 return (idx_tab); 1509 } 1510 } 1511 1512 /* No such luck, create a new entry */ 1513 idx_tab = kmem_zalloc(sizeof (sa_idx_tab_t), KM_SLEEP); 1514 idx_tab->sa_idx_tab = 1515 kmem_zalloc(sizeof (uint32_t) * sa->sa_num_attrs, KM_SLEEP); 1516 idx_tab->sa_layout = tb; 1517 refcount_create(&idx_tab->sa_refcount); 1518 if (tb->lot_var_sizes) 1519 idx_tab->sa_variable_lengths = kmem_alloc(sizeof (uint16_t) * 1520 tb->lot_var_sizes, KM_SLEEP); 1521 1522 sa_attr_iter(os, hdr, bonustype, sa_build_idx_tab, 1523 tb, idx_tab); 1524 sa_idx_tab_hold(os, idx_tab); /* one hold for consumer */ 1525 sa_idx_tab_hold(os, idx_tab); /* one for layout */ 1526 list_insert_tail(&tb->lot_idx_tab, idx_tab); 1527 return (idx_tab); 1528 } 1529 1530 void 1531 sa_default_locator(void **dataptr, uint32_t *len, uint32_t total_len, 1532 boolean_t start, void *userdata) 1533 { 1534 ASSERT(start); 1535 1536 *dataptr = userdata; 1537 *len = total_len; 1538 } 1539 1540 static void 1541 sa_attr_register_sync(sa_handle_t *hdl, dmu_tx_t *tx) 1542 { 1543 uint64_t attr_value = 0; 1544 sa_os_t *sa = hdl->sa_os->os_sa; 1545 sa_attr_table_t *tb = sa->sa_attr_table; 1546 int i; 1547 1548 mutex_enter(&sa->sa_lock); 1549 1550 if (!sa->sa_need_attr_registration || sa->sa_master_obj == NULL) { 1551 mutex_exit(&sa->sa_lock); 1552 return; 1553 } 1554 1555 if (sa->sa_reg_attr_obj == NULL) { 1556 sa->sa_reg_attr_obj = zap_create_link(hdl->sa_os, 1557 DMU_OT_SA_ATTR_REGISTRATION, 1558 sa->sa_master_obj, SA_REGISTRY, tx); 1559 } 1560 for (i = 0; i != sa->sa_num_attrs; i++) { 1561 if (sa->sa_attr_table[i].sa_registered) 1562 continue; 1563 ATTR_ENCODE(attr_value, tb[i].sa_attr, tb[i].sa_length, 1564 tb[i].sa_byteswap); 1565 VERIFY(0 == zap_update(hdl->sa_os, sa->sa_reg_attr_obj, 1566 tb[i].sa_name, 8, 1, &attr_value, tx)); 1567 tb[i].sa_registered = B_TRUE; 1568 } 1569 sa->sa_need_attr_registration = B_FALSE; 1570 mutex_exit(&sa->sa_lock); 1571 } 1572 1573 /* 1574 * Replace all attributes with attributes specified in template. 1575 * If dnode had a spill buffer then those attributes will be 1576 * also be replaced, possibly with just an empty spill block 1577 * 1578 * This interface is intended to only be used for bulk adding of 1579 * attributes for a new file. It will also be used by the ZPL 1580 * when converting and old formatted znode to native SA support. 1581 */ 1582 int 1583 sa_replace_all_by_template_locked(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, 1584 int attr_count, dmu_tx_t *tx) 1585 { 1586 sa_os_t *sa = hdl->sa_os->os_sa; 1587 1588 if (sa->sa_need_attr_registration) 1589 sa_attr_register_sync(hdl, tx); 1590 return (sa_build_layouts(hdl, attr_desc, attr_count, tx)); 1591 } 1592 1593 int 1594 sa_replace_all_by_template(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, 1595 int attr_count, dmu_tx_t *tx) 1596 { 1597 int error; 1598 1599 mutex_enter(&hdl->sa_lock); 1600 error = sa_replace_all_by_template_locked(hdl, attr_desc, 1601 attr_count, tx); 1602 mutex_exit(&hdl->sa_lock); 1603 return (error); 1604 } 1605 1606 /* 1607 * add/remove/replace a single attribute and then rewrite the entire set 1608 * of attributes. 1609 */ 1610 static int 1611 sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr, 1612 sa_data_op_t action, sa_data_locator_t *locator, void *datastart, 1613 uint16_t buflen, dmu_tx_t *tx) 1614 { 1615 sa_os_t *sa = hdl->sa_os->os_sa; 1616 dmu_buf_impl_t *db = (dmu_buf_impl_t *)hdl->sa_bonus; 1617 dnode_t *dn; 1618 sa_bulk_attr_t *attr_desc; 1619 void *old_data[2]; 1620 int bonus_attr_count = 0; 1621 int bonus_data_size, spill_data_size; 1622 int spill_attr_count = 0; 1623 int error; 1624 uint16_t length; 1625 int i, j, k, length_idx; 1626 sa_hdr_phys_t *hdr; 1627 sa_idx_tab_t *idx_tab; 1628 int attr_count; 1629 int count; 1630 1631 ASSERT(MUTEX_HELD(&hdl->sa_lock)); 1632 1633 /* First make of copy of the old data */ 1634 1635 DB_DNODE_ENTER(db); 1636 dn = DB_DNODE(db); 1637 if (dn->dn_bonuslen != 0) { 1638 bonus_data_size = hdl->sa_bonus->db_size; 1639 old_data[0] = kmem_alloc(bonus_data_size, KM_SLEEP); 1640 bcopy(hdl->sa_bonus->db_data, old_data[0], 1641 hdl->sa_bonus->db_size); 1642 bonus_attr_count = hdl->sa_bonus_tab->sa_layout->lot_attr_count; 1643 } else { 1644 old_data[0] = NULL; 1645 } 1646 DB_DNODE_EXIT(db); 1647 1648 /* Bring spill buffer online if it isn't currently */ 1649 1650 if ((error = sa_get_spill(hdl)) == 0) { 1651 spill_data_size = hdl->sa_spill->db_size; 1652 old_data[1] = kmem_alloc(spill_data_size, KM_SLEEP); 1653 bcopy(hdl->sa_spill->db_data, old_data[1], 1654 hdl->sa_spill->db_size); 1655 spill_attr_count = 1656 hdl->sa_spill_tab->sa_layout->lot_attr_count; 1657 } else if (error && error != ENOENT) { 1658 if (old_data[0]) 1659 kmem_free(old_data[0], bonus_data_size); 1660 return (error); 1661 } else { 1662 old_data[1] = NULL; 1663 } 1664 1665 /* build descriptor of all attributes */ 1666 1667 attr_count = bonus_attr_count + spill_attr_count; 1668 if (action == SA_ADD) 1669 attr_count++; 1670 else if (action == SA_REMOVE) 1671 attr_count--; 1672 1673 attr_desc = kmem_zalloc(sizeof (sa_bulk_attr_t) * attr_count, KM_SLEEP); 1674 1675 /* 1676 * loop through bonus and spill buffer if it exists, and 1677 * build up new attr_descriptor to reset the attributes 1678 */ 1679 k = j = 0; 1680 count = bonus_attr_count; 1681 hdr = SA_GET_HDR(hdl, SA_BONUS); 1682 idx_tab = SA_IDX_TAB_GET(hdl, SA_BONUS); 1683 for (; k != 2; k++) { 1684 /* iterate over each attribute in layout */ 1685 for (i = 0, length_idx = 0; i != count; i++) { 1686 sa_attr_type_t attr; 1687 1688 attr = idx_tab->sa_layout->lot_attrs[i]; 1689 if (attr == newattr) { 1690 if (action == SA_REMOVE) { 1691 j++; 1692 continue; 1693 } 1694 ASSERT(SA_REGISTERED_LEN(sa, attr) == 0); 1695 ASSERT(action == SA_REPLACE); 1696 SA_ADD_BULK_ATTR(attr_desc, j, attr, 1697 locator, datastart, buflen); 1698 } else { 1699 length = SA_REGISTERED_LEN(sa, attr); 1700 if (length == 0) { 1701 length = hdr->sa_lengths[length_idx++]; 1702 } 1703 1704 SA_ADD_BULK_ATTR(attr_desc, j, attr, 1705 NULL, (void *) 1706 (TOC_OFF(idx_tab->sa_idx_tab[attr]) + 1707 (uintptr_t)old_data[k]), length); 1708 } 1709 } 1710 if (k == 0 && hdl->sa_spill) { 1711 hdr = SA_GET_HDR(hdl, SA_SPILL); 1712 idx_tab = SA_IDX_TAB_GET(hdl, SA_SPILL); 1713 count = spill_attr_count; 1714 } else { 1715 break; 1716 } 1717 } 1718 if (action == SA_ADD) { 1719 length = SA_REGISTERED_LEN(sa, newattr); 1720 if (length == 0) { 1721 length = buflen; 1722 } 1723 SA_ADD_BULK_ATTR(attr_desc, j, newattr, locator, 1724 datastart, buflen); 1725 } 1726 1727 error = sa_build_layouts(hdl, attr_desc, attr_count, tx); 1728 1729 if (old_data[0]) 1730 kmem_free(old_data[0], bonus_data_size); 1731 if (old_data[1]) 1732 kmem_free(old_data[1], spill_data_size); 1733 kmem_free(attr_desc, sizeof (sa_bulk_attr_t) * attr_count); 1734 1735 return (error); 1736 } 1737 1738 static int 1739 sa_bulk_update_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count, 1740 dmu_tx_t *tx) 1741 { 1742 int error; 1743 sa_os_t *sa = hdl->sa_os->os_sa; 1744 dmu_object_type_t bonustype; 1745 1746 bonustype = SA_BONUSTYPE_FROM_DB(SA_GET_DB(hdl, SA_BONUS)); 1747 1748 ASSERT(hdl); 1749 ASSERT(MUTEX_HELD(&hdl->sa_lock)); 1750 1751 /* sync out registration table if necessary */ 1752 if (sa->sa_need_attr_registration) 1753 sa_attr_register_sync(hdl, tx); 1754 1755 error = sa_attr_op(hdl, bulk, count, SA_UPDATE, tx); 1756 if (error == 0 && !IS_SA_BONUSTYPE(bonustype) && sa->sa_update_cb) 1757 sa->sa_update_cb(hdl, tx); 1758 1759 return (error); 1760 } 1761 1762 /* 1763 * update or add new attribute 1764 */ 1765 int 1766 sa_update(sa_handle_t *hdl, sa_attr_type_t type, 1767 void *buf, uint32_t buflen, dmu_tx_t *tx) 1768 { 1769 int error; 1770 sa_bulk_attr_t bulk; 1771 1772 bulk.sa_attr = type; 1773 bulk.sa_data_func = NULL; 1774 bulk.sa_length = buflen; 1775 bulk.sa_data = buf; 1776 1777 mutex_enter(&hdl->sa_lock); 1778 error = sa_bulk_update_impl(hdl, &bulk, 1, tx); 1779 mutex_exit(&hdl->sa_lock); 1780 return (error); 1781 } 1782 1783 int 1784 sa_update_from_cb(sa_handle_t *hdl, sa_attr_type_t attr, 1785 uint32_t buflen, sa_data_locator_t *locator, void *userdata, dmu_tx_t *tx) 1786 { 1787 int error; 1788 sa_bulk_attr_t bulk; 1789 1790 bulk.sa_attr = attr; 1791 bulk.sa_data = userdata; 1792 bulk.sa_data_func = locator; 1793 bulk.sa_length = buflen; 1794 1795 mutex_enter(&hdl->sa_lock); 1796 error = sa_bulk_update_impl(hdl, &bulk, 1, tx); 1797 mutex_exit(&hdl->sa_lock); 1798 return (error); 1799 } 1800 1801 /* 1802 * Return size of an attribute 1803 */ 1804 1805 int 1806 sa_size(sa_handle_t *hdl, sa_attr_type_t attr, int *size) 1807 { 1808 sa_bulk_attr_t bulk; 1809 int error; 1810 1811 bulk.sa_data = NULL; 1812 bulk.sa_attr = attr; 1813 bulk.sa_data_func = NULL; 1814 1815 ASSERT(hdl); 1816 mutex_enter(&hdl->sa_lock); 1817 if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) != 0) { 1818 mutex_exit(&hdl->sa_lock); 1819 return (error); 1820 } 1821 *size = bulk.sa_size; 1822 1823 mutex_exit(&hdl->sa_lock); 1824 return (0); 1825 } 1826 1827 int 1828 sa_bulk_lookup_locked(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count) 1829 { 1830 ASSERT(hdl); 1831 ASSERT(MUTEX_HELD(&hdl->sa_lock)); 1832 return (sa_lookup_impl(hdl, attrs, count)); 1833 } 1834 1835 int 1836 sa_bulk_lookup(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count) 1837 { 1838 int error; 1839 1840 ASSERT(hdl); 1841 mutex_enter(&hdl->sa_lock); 1842 error = sa_bulk_lookup_locked(hdl, attrs, count); 1843 mutex_exit(&hdl->sa_lock); 1844 return (error); 1845 } 1846 1847 int 1848 sa_bulk_update(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count, dmu_tx_t *tx) 1849 { 1850 int error; 1851 1852 ASSERT(hdl); 1853 mutex_enter(&hdl->sa_lock); 1854 error = sa_bulk_update_impl(hdl, attrs, count, tx); 1855 mutex_exit(&hdl->sa_lock); 1856 return (error); 1857 } 1858 1859 int 1860 sa_remove(sa_handle_t *hdl, sa_attr_type_t attr, dmu_tx_t *tx) 1861 { 1862 int error; 1863 1864 mutex_enter(&hdl->sa_lock); 1865 error = sa_modify_attrs(hdl, attr, SA_REMOVE, NULL, 1866 NULL, 0, tx); 1867 mutex_exit(&hdl->sa_lock); 1868 return (error); 1869 } 1870 1871 void 1872 sa_object_info(sa_handle_t *hdl, dmu_object_info_t *doi) 1873 { 1874 dmu_object_info_from_db((dmu_buf_t *)hdl->sa_bonus, doi); 1875 } 1876 1877 void 1878 sa_object_size(sa_handle_t *hdl, uint32_t *blksize, u_longlong_t *nblocks) 1879 { 1880 dmu_object_size_from_db((dmu_buf_t *)hdl->sa_bonus, 1881 blksize, nblocks); 1882 } 1883 1884 void 1885 sa_update_user(sa_handle_t *newhdl, sa_handle_t *oldhdl) 1886 { 1887 (void) dmu_buf_update_user((dmu_buf_t *)newhdl->sa_bonus, 1888 oldhdl, newhdl, NULL, sa_evict); 1889 oldhdl->sa_bonus = NULL; 1890 } 1891 1892 void 1893 sa_set_userp(sa_handle_t *hdl, void *ptr) 1894 { 1895 hdl->sa_userp = ptr; 1896 } 1897 1898 dmu_buf_t * 1899 sa_get_db(sa_handle_t *hdl) 1900 { 1901 return ((dmu_buf_t *)hdl->sa_bonus); 1902 } 1903 1904 void * 1905 sa_get_userdata(sa_handle_t *hdl) 1906 { 1907 return (hdl->sa_userp); 1908 } 1909 1910 void 1911 sa_register_update_callback_locked(objset_t *os, sa_update_cb_t *func) 1912 { 1913 ASSERT(MUTEX_HELD(&os->os_sa->sa_lock)); 1914 os->os_sa->sa_update_cb = func; 1915 } 1916 1917 void 1918 sa_register_update_callback(objset_t *os, sa_update_cb_t *func) 1919 { 1920 1921 mutex_enter(&os->os_sa->sa_lock); 1922 sa_register_update_callback_locked(os, func); 1923 mutex_exit(&os->os_sa->sa_lock); 1924 } 1925 1926 uint64_t 1927 sa_handle_object(sa_handle_t *hdl) 1928 { 1929 return (hdl->sa_bonus->db_object); 1930 } 1931 1932 boolean_t 1933 sa_enabled(objset_t *os) 1934 { 1935 return (os->os_sa == NULL); 1936 } 1937 1938 int 1939 sa_set_sa_object(objset_t *os, uint64_t sa_object) 1940 { 1941 sa_os_t *sa = os->os_sa; 1942 1943 if (sa->sa_master_obj) 1944 return (1); 1945 1946 sa->sa_master_obj = sa_object; 1947 1948 return (0); 1949 } 1950 1951 int 1952 sa_hdrsize(void *arg) 1953 { 1954 sa_hdr_phys_t *hdr = arg; 1955 1956 return (SA_HDR_SIZE(hdr)); 1957 } 1958 1959 void 1960 sa_handle_lock(sa_handle_t *hdl) 1961 { 1962 ASSERT(hdl); 1963 mutex_enter(&hdl->sa_lock); 1964 } 1965 1966 void 1967 sa_handle_unlock(sa_handle_t *hdl) 1968 { 1969 ASSERT(hdl); 1970 mutex_exit(&hdl->sa_lock); 1971 } 1972