1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* 23 * Copyright 2005 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #pragma ident "%Z%%M% %I% %E% SMI" 28 29 #include <sys/types.h> 30 #include <sys/time.h> 31 #include <sys/param.h> 32 #include <sys/systm.h> 33 #include <sys/signal.h> 34 #include <sys/sysmacros.h> 35 #include <sys/cmn_err.h> 36 #include <sys/user.h> 37 #include <sys/proc.h> 38 #include <sys/task.h> 39 #include <sys/project.h> 40 #include <sys/klwp.h> 41 #include <sys/vnode.h> 42 #include <sys/file.h> 43 #include <sys/fcntl.h> 44 #include <sys/flock.h> 45 #include <sys/var.h> 46 #include <sys/stream.h> 47 #include <sys/strsubr.h> 48 #include <sys/conf.h> 49 #include <sys/class.h> 50 #include <sys/ts.h> 51 #include <sys/rt.h> 52 #include <sys/exec.h> 53 #include <sys/exechdr.h> 54 #include <sys/buf.h> 55 #include <sys/resource.h> 56 #include <vm/seg.h> 57 #include <vm/pvn.h> 58 #include <vm/seg_kmem.h> 59 #include <sys/vmparam.h> 60 #include <sys/machparam.h> 61 #include <sys/utsname.h> 62 #include <sys/kmem.h> 63 #include <sys/stack.h> 64 #include <sys/modctl.h> 65 #include <sys/fdbuffer.h> 66 #include <sys/cyclic_impl.h> 67 #include <sys/disp.h> 68 #include <sys/tuneable.h> 69 70 #include <sys/vmem.h> 71 #include <sys/clock.h> 72 #include <sys/serializer.h> 73 74 /* 75 * The following few lines describe generic things that must be compiled 76 * into the booted executable (unix) rather than genunix or any other 77 * module because they're required by crash dump readers, etc. 78 */ 79 struct modctl modules; /* head of linked list of modules */ 80 char *default_path; /* default module loading path */ 81 struct swapinfo *swapinfo; /* protected by the swapinfo_lock */ 82 proc_t *practive; /* active process list */ 83 uint_t nproc; /* current number of processes */ 84 proc_t p0; /* process 0 */ 85 struct plock p0lock; /* p0's p_lock */ 86 klwp_t lwp0; /* t0's lwp */ 87 task_t *task0p; /* task 0 */ 88 kproject_t *proj0p; /* location of project 0 */ 89 90 /* 91 * The following are "implementation architecture" dependent constants made 92 * available here in the form of initialized data for use by "implementation 93 * architecture" independent modules. See machparam.h. 94 */ 95 const unsigned long _pagesize = (unsigned long)PAGESIZE; 96 const unsigned int _pageshift = (unsigned int)PAGESHIFT; 97 const unsigned long _pageoffset = (unsigned long)PAGEOFFSET; 98 /* 99 * XXX - This value pagemask has to be a 64bit size because 100 * large file support uses this mask on offsets which are 64 bit size. 101 * using unsigned leaves the higher 32 bits value as zero thus 102 * corrupting offset calculations in the file system and VM. 103 */ 104 const u_longlong_t _pagemask = (u_longlong_t)PAGEMASK; 105 const unsigned long _mmu_pagesize = (unsigned long)MMU_PAGESIZE; 106 const unsigned int _mmu_pageshift = (unsigned int)MMU_PAGESHIFT; 107 const unsigned long _mmu_pageoffset = (unsigned long)MMU_PAGEOFFSET; 108 const unsigned long _mmu_pagemask = (unsigned long)MMU_PAGEMASK; 109 uintptr_t _kernelbase = (uintptr_t)KERNELBASE; 110 uintptr_t _userlimit = (uintptr_t)USERLIMIT; 111 uintptr_t _userlimit32 = (uintptr_t)USERLIMIT32; 112 #if !defined(__ia64) 113 const uintptr_t _argsbase = (uintptr_t)ARGSBASE; 114 #endif 115 const unsigned int _diskrpm = (unsigned int)DISKRPM; 116 const unsigned long _pgthresh = (unsigned long)PGTHRESH; 117 const unsigned int _maxslp = (unsigned int)MAXSLP; 118 const unsigned long _maxhandspreadpages = (unsigned long)MAXHANDSPREADPAGES; 119 const int _ncpu = (int)NCPU; 120 const unsigned long _defaultstksz = (unsigned long)DEFAULTSTKSZ; 121 const unsigned int _nbpg = (unsigned int)MMU_PAGESIZE; 122 123 /* 124 * System parameter formulae. 125 * 126 * This file is copied into each directory where we compile 127 * the kernel; it should be modified there to suit local taste 128 * if necessary. 129 */ 130 131 /* 132 * Default hz is 100, but if we set hires_tick we get higher resolution 133 * clock behavior (currently defined to be 1000 hz). Higher values seem 134 * to work, but are not supported. 135 * 136 * If we do decide to play with higher values, remember that hz should 137 * satisfy the following constraints to avoid integer round-off problems: 138 * 139 * (1) hz should be in the range 100 <= hz <= MICROSEC. If hz exceeds 140 * MICROSEC, usec_per_tick will be zero and lots of stuff will break. 141 * Similarly, if hz < 100 then hz / 100 == 0 and stuff will break. 142 * 143 * (2) If hz <= 1000, it should be both a multiple of 100 and a 144 * divisor of 1000. 145 * 146 * (3) If hz > 1000, it should be both a multiple of 1000 and a 147 * divisor of MICROSEC. 148 * 149 * Thus the only reasonable values of hz (i.e. the values that won't 150 * cause roundoff error) are: 100, 200, 500, 1000, 2000, 4000, 5000, 151 * 8000, 10000, 20000, 25000, 40000, 50000, 100000, 125000, 200000, 152 * 250000, 500000, 1000000. As of this writing (1996) a clock rate 153 * of more than about 10 kHz seems utterly ridiculous, although 154 * this observation will no doubt seem quaintly amusing one day. 155 */ 156 int hz = 100; 157 int hires_hz = 1000; 158 int hires_tick = 0; 159 int cpu_decay_factor = 10; /* this is no longer tied to clock */ 160 int tick_per_msec; /* clock ticks per millisecond (zero if hz < 1000) */ 161 int msec_per_tick; /* millseconds per clock tick (zero if hz > 1000) */ 162 int usec_per_tick; /* microseconds per clock tick */ 163 int nsec_per_tick; /* nanoseconds per clock tick */ 164 int max_hres_adj; /* maximum adjustment of hrtime per tick */ 165 166 /* 167 * Setting "snooping" to a non-zero value will cause a deadman panic if 168 * snoop_interval microseconds elapse without lbolt increasing. The default 169 * snoop_interval is 50 seconds. 170 */ 171 #define SNOOP_INTERVAL_MIN (MICROSEC) 172 #define SNOOP_INTERVAL_DEFAULT (50 * MICROSEC) 173 174 int snooping = 0; 175 uint_t snoop_interval = SNOOP_INTERVAL_DEFAULT; 176 177 /* 178 * Tables of initialization functions, called from main(). 179 */ 180 181 extern void system_taskq_init(void); 182 extern void binit(void); 183 extern void space_init(void); 184 extern void dnlc_init(void); 185 extern void vfsinit(void); 186 extern void finit(void); 187 extern void strinit(void); 188 extern void flk_init(void); 189 extern void ftrace_init(void); 190 extern void softcall_init(void); 191 extern void sadinit(void); 192 extern void ttyinit(void); 193 extern void schedctl_init(void); 194 extern void deadman_init(void); 195 extern void clock_timer_init(void); 196 extern void clock_realtime_init(void); 197 extern void clock_highres_init(void); 198 199 void (*init_tbl[])(void) = { 200 system_taskq_init, 201 binit, 202 space_init, 203 dnlc_init, 204 vfsinit, 205 finit, 206 strinit, 207 serializer_init, 208 softcall_init, 209 sadinit, 210 ttyinit, 211 as_init, 212 pvn_init, 213 anon_init, 214 segvn_init, 215 flk_init, 216 schedctl_init, 217 fdb_init, 218 deadman_init, 219 clock_timer_init, 220 clock_realtime_init, 221 clock_highres_init, 222 0 223 }; 224 225 226 /* 227 * Any per cpu resources should be initialized via 228 * an entry in mp_init_tbl(). 229 */ 230 231 void (*mp_init_tbl[])(void) = { 232 ftrace_init, 233 cyclic_mp_init, 234 0 235 }; 236 237 int maxusers; /* kitchen-sink knob for dynamic configuration */ 238 239 /* 240 * pidmax -- highest pid value assigned by the system 241 * Settable in /etc/system 242 */ 243 int pidmax = DEFAULT_MAXPID; 244 245 /* 246 * jump_pid - if set, this value is where pid numbers should start 247 * after the first few system pids (0-3) are used. If 0, pids are 248 * chosen in the usual way. This variable can be used to quickly 249 * create large pids (by setting it to 100000, for example). pids 250 * less than this value will never be chosen. 251 */ 252 pid_t jump_pid = DEFAULT_JUMPPID; 253 254 /* 255 * autoup -- used in struct var for dynamic config of the age a delayed-write 256 * buffer must be in seconds before bdflush will write it out. 257 */ 258 #define DEFAULT_AUTOUP 30 259 int autoup = DEFAULT_AUTOUP; 260 261 /* 262 * bufhwm -- tuneable variable for struct var for v_bufhwm. 263 * high water mark for buffer cache mem usage in units of K bytes. 264 * 265 * bufhwm_pct -- ditto, but given in % of physmem. 266 */ 267 int bufhwm = 0; 268 int bufhwm_pct = 0; 269 270 /* 271 * Process table. 272 */ 273 int maxpid; 274 int max_nprocs; /* set in param_init() */ 275 int maxuprc; /* set in param_init() */ 276 int reserved_procs; 277 int nthread = 1; 278 279 /* 280 * UFS tunables 281 */ 282 int ufs_ninode; /* declared here due to backwards compatibility */ 283 int ndquot; /* declared here due to backwards compatibility */ 284 285 /* 286 * Exec switch table. This is used by the generic exec module 287 * to switch out to the desired executable type, based on the 288 * magic number. The currently supported types are ELF, a.out 289 * (both NMAGIC and ZMAGIC), interpreter (#!) files, 290 * and Java executables. 291 */ 292 /* 293 * Magic numbers 294 */ 295 short elfmagic = 0x7f45; 296 short intpmagic = 0x2321; 297 short jmagic = 0x504b; 298 299 #if defined(__sparc) 300 short aout_nmagic = NMAGIC; 301 short aout_zmagic = ZMAGIC; 302 short aout_omagic = OMAGIC; 303 #endif 304 short nomagic = 0; 305 306 /* 307 * Magic strings 308 */ 309 #define ELF32MAGIC_STRING "\x7f""ELF\x1" 310 #define ELF64MAGIC_STRING "\x7f""ELF\x2" 311 #define INTPMAGIC_STRING "#!" 312 #define JAVAMAGIC_STRING "PK\003\004" 313 #define AOUT_OMAGIC_STRING "\x1""\x07" /* 0407 */ 314 #define AOUT_NMAGIC_STRING "\x1""\x08" /* 0410 */ 315 #define AOUT_ZMAGIC_STRING "\x1""\x0b" /* 0413 */ 316 #define NOMAGIC_STRING "" 317 318 char elf32magicstr[] = ELF32MAGIC_STRING; 319 char elf64magicstr[] = ELF64MAGIC_STRING; 320 char intpmagicstr[] = INTPMAGIC_STRING; 321 char javamagicstr[] = JAVAMAGIC_STRING; 322 #if defined(__sparc) 323 char aout_nmagicstr[] = AOUT_NMAGIC_STRING; 324 char aout_zmagicstr[] = AOUT_ZMAGIC_STRING; 325 char aout_omagicstr[] = AOUT_OMAGIC_STRING; 326 #endif 327 char nomagicstr[] = NOMAGIC_STRING; 328 329 char *execswnames[] = { 330 "elfexec", /* Elf32 */ 331 #ifdef _LP64 332 "elfexec", /* Elf64 */ 333 #endif 334 "intpexec", 335 "javaexec", 336 #if defined(__sparc) 337 "aoutexec", 338 "aoutexec", 339 "aoutexec", 340 #endif 341 NULL, 342 NULL, 343 NULL 344 }; 345 346 struct execsw execsw[] = { 347 { elf32magicstr, 0, 5, NULL, NULL, NULL }, 348 #ifdef _LP64 349 { elf64magicstr, 0, 5, NULL, NULL, NULL }, 350 #endif 351 { intpmagicstr, 0, 2, NULL, NULL, NULL }, 352 { javamagicstr, 0, 4, NULL, NULL, NULL }, 353 #if defined(__sparc) 354 { aout_zmagicstr, 2, 2, NULL, NULL, NULL }, 355 { aout_nmagicstr, 2, 2, NULL, NULL, NULL }, 356 { aout_omagicstr, 2, 2, NULL, NULL, NULL }, 357 #endif 358 { nomagicstr, 0, 0, NULL, NULL, NULL }, 359 { nomagicstr, 0, 0, NULL, NULL, NULL }, 360 { nomagicstr, 0, 0, NULL, NULL, NULL }, 361 { nomagicstr, 0, 0, NULL, NULL, NULL } 362 }; 363 int nexectype = sizeof (execsw) / sizeof (execsw[0]); /* # of exec types */ 364 kmutex_t execsw_lock; /* Used for allocation of execsw entries */ 365 366 /* 367 * symbols added to make changing max-file-descriptors 368 * simple via /etc/system 369 */ 370 #define RLIM_FD_CUR 0x100 371 #define RLIM_FD_MAX 0x10000 372 373 uint_t rlim_fd_cur = RLIM_FD_CUR; 374 uint_t rlim_fd_max = RLIM_FD_MAX; 375 376 /* 377 * (Default resource limits were formerly declared here, but are now provided by 378 * the more general resource controls framework.) 379 */ 380 381 /* 382 * STREAMS tunables 383 */ 384 int nstrpush = 9; /* maximum # of modules/drivers on a stream */ 385 ssize_t strctlsz = 1024; /* maximum size of user-generated M_PROTO */ 386 ssize_t strmsgsz = 0x10000; /* maximum size of user-generated M_DATA */ 387 /* for `strmsgsz', zero means unlimited */ 388 /* 389 * Filesystem tunables 390 */ 391 int rstchown = 1; /* POSIX_CHOWN_RESTRICTED is enabled */ 392 int ngroups_max = NGROUPS_MAX_DEFAULT; 393 394 /* 395 * generic scheduling stuff 396 * 397 * Configurable parameters for RT and TS are in the respective 398 * scheduling class modules. 399 */ 400 401 pri_t maxclsyspri = MAXCLSYSPRI; 402 pri_t minclsyspri = MINCLSYSPRI; 403 char sys_name[] = "SYS"; 404 405 extern pri_t sys_init(); 406 extern classfuncs_t sys_classfuncs; 407 408 sclass_t sclass[] = { 409 { "SYS", sys_init, &sys_classfuncs, STATIC_SCHED, 0 }, 410 { "", NULL, NULL, NULL, 0 }, 411 { "", NULL, NULL, NULL, 0 }, 412 { "", NULL, NULL, NULL, 0 }, 413 { "", NULL, NULL, NULL, 0 }, 414 { "", NULL, NULL, NULL, 0 }, 415 { "", NULL, NULL, NULL, 0 }, 416 { "", NULL, NULL, NULL, 0 }, 417 { "", NULL, NULL, NULL, 0 }, 418 { "", NULL, NULL, NULL, 0 } 419 }; 420 421 int loaded_classes = 1; /* for loaded classes */ 422 kmutex_t class_lock; /* lock for class[] */ 423 424 int nclass = sizeof (sclass) / sizeof (sclass_t); 425 char initcls[] = "TS"; 426 char *defaultclass = initcls; 427 428 /* 429 * Tunable system parameters. 430 */ 431 432 /* 433 * The integers tune_* are done this way so that the tune 434 * data structure may be "tuned" if necessary from the /etc/system 435 * file. The tune data structure is initialized in param_init(); 436 */ 437 438 tune_t tune; 439 440 /* 441 * If freemem < t_getpgslow, then start to steal pages from processes. 442 */ 443 int tune_t_gpgslo = 25; 444 445 /* 446 * Rate at which fsflush is run, in seconds. 447 */ 448 #define DEFAULT_TUNE_T_FSFLUSHR 1 449 int tune_t_fsflushr = DEFAULT_TUNE_T_FSFLUSHR; 450 451 /* 452 * The minimum available resident (not swappable) memory to maintain 453 * in order to avoid deadlock. In pages. 454 */ 455 int tune_t_minarmem = 25; 456 457 /* 458 * The minimum available swappable memory to maintain in order to avoid 459 * deadlock. In pages. 460 */ 461 int tune_t_minasmem = 25; 462 463 int tune_t_flckrec = 512; /* max # of active frlocks */ 464 465 /* 466 * Number of currently available pages that cannot be 'locked' 467 * This is set in init_pages_pp_maximum, and must be initialized 468 * to zero here to detect an override in /etc/system 469 */ 470 pgcnt_t pages_pp_maximum = 0; 471 472 int boothowto; /* boot flags passed to kernel */ 473 struct var v; /* System Configuration Information */ 474 475 /* 476 * System Configuration Information 477 */ 478 479 #if defined(__sparc) 480 481 /* 482 * On sparc machines, read hw_serial from the firmware at boot time 483 * and simply assert Sun is the hardware provider. Hmm. 484 */ 485 char architecture[] = "sparcv9"; 486 char architecture_32[] = "sparc"; 487 char hw_serial[11]; 488 char hw_provider[] = "Sun_Microsystems"; 489 490 #elif defined(__i386) 491 492 /* 493 * On x86 machines, read hw_serial, hw_provider and srpc_domain from 494 * /etc/bootrc at boot time. 495 */ 496 char architecture[] = "i386"; 497 char architecture_32[] = "i386"; 498 char hw_serial[11] = "0"; 499 char hw_provider[SYS_NMLN] = ""; 500 501 #elif defined(__ia64) 502 503 /* 504 * On ia64 machines, read hw_serial, hw_provider and srpc_domain from 505 * /etc/bootrc at boot time. 506 */ 507 char architecture[] = "ia64"; 508 char architecture_32[] = "i386"; 509 char hw_serial[11] = "0"; 510 char hw_provider[SYS_NMLN] = ""; 511 512 #elif defined(__amd64) 513 514 /* 515 * On amd64 machines, read hw_serial, hw_provider and srpc_domain from 516 * /etc/bootrc at boot time. 517 */ 518 char architecture[] = "amd64"; 519 char architecture_32[] = "i386"; 520 char hw_serial[11] = "0"; 521 char hw_provider[SYS_NMLN] = ""; 522 523 #else 524 #error "unknown processor architecture" 525 #endif 526 527 char srpc_domain[SYS_NMLN] = ""; 528 char platform[SYS_NMLN] = ""; /* read from the devinfo root node */ 529 530 /* Initialize isa_list */ 531 char *isa_list = architecture; 532 533 static pgcnt_t original_physmem = 0; 534 535 #define MIN_DEFAULT_MAXUSERS 8u 536 #define MAX_DEFAULT_MAXUSERS 2048u 537 #define MAX_MAXUSERS 4096u 538 539 void 540 param_preset(void) 541 { 542 original_physmem = physmem; 543 } 544 545 void 546 param_calc(int platform_max_nprocs) 547 { 548 /* 549 * Default to about one "user" per megabyte, taking into 550 * account both physical and virtual constraints. 551 * Note: 2^20 is a meg; shifting right by (20 - PAGESHIFT) 552 * converts pages to megs without integer overflow. 553 */ 554 if (physmem > original_physmem) { 555 physmem = original_physmem; 556 cmn_err(CE_NOTE, "physmem limited to %ld", physmem); 557 } 558 if (maxusers == 0) { 559 pgcnt_t physmegs = physmem >> (20 - PAGESHIFT); 560 pgcnt_t virtmegs = vmem_size(heap_arena, VMEM_FREE) >> 20; 561 maxusers = MIN(MAX(MIN(physmegs, virtmegs), 562 MIN_DEFAULT_MAXUSERS), MAX_DEFAULT_MAXUSERS); 563 } 564 if (maxusers > MAX_MAXUSERS) { 565 maxusers = MAX_MAXUSERS; 566 cmn_err(CE_NOTE, "maxusers limited to %d", MAX_MAXUSERS); 567 } 568 569 if (ngroups_max > NGROUPS_MAX_DEFAULT) 570 cmn_err(CE_WARN, 571 "ngroups_max of %d > 16, NFS AUTH_SYS will not work properly", 572 ngroups_max); 573 574 #ifdef DEBUG 575 /* 576 * The purpose of maxusers is to prevent memory overcommit. 577 * DEBUG kernels take more space, so reduce maxusers a bit. 578 */ 579 maxusers = (3 * maxusers) / 4; 580 #endif 581 582 /* 583 * We need to dynamically change any variables now so that 584 * the setting of maxusers and pidmax propagate to the other 585 * variables that are dependent on them. 586 */ 587 if (reserved_procs == 0) 588 reserved_procs = 5; 589 if (pidmax < reserved_procs || pidmax > MAX_MAXPID) 590 maxpid = MAX_MAXPID; 591 else 592 maxpid = pidmax; 593 594 /* 595 * This allows platform-dependent code to constrain the maximum 596 * number of processes allowed in case there are e.g. VM limitations 597 * with how many contexts are available. 598 */ 599 if (max_nprocs == 0) 600 max_nprocs = (10 + 16 * maxusers); 601 if (platform_max_nprocs > 0 && max_nprocs > platform_max_nprocs) 602 max_nprocs = platform_max_nprocs; 603 if (max_nprocs > maxpid) 604 max_nprocs = maxpid; 605 606 if (maxuprc == 0) 607 maxuprc = (max_nprocs - reserved_procs); 608 } 609 610 void 611 param_init(void) 612 { 613 /* 614 * Set each individual element of struct var v to be the 615 * default value. This is done this way 616 * so that a user can set the assigned integer value in the 617 * /etc/system file *IF* tuning is needed. 618 */ 619 v.v_proc = max_nprocs; /* v_proc - max # of processes system wide */ 620 v.v_maxupttl = max_nprocs - reserved_procs; 621 v.v_maxsyspri = (int)maxclsyspri; /* max global pri for sysclass */ 622 v.v_maxup = MIN(maxuprc, v.v_maxupttl); /* max procs per user */ 623 v.v_autoup = autoup; /* v_autoup - delay for delayed writes */ 624 625 /* 626 * Set each individual element of struct tune to be the 627 * default value. Each struct element This is done this way 628 * so that a user can set the assigned integer value in the 629 * /etc/system file *IF* tuning is needed. 630 */ 631 tune.t_gpgslo = tune_t_gpgslo; 632 tune.t_fsflushr = tune_t_fsflushr; 633 tune.t_minarmem = tune_t_minarmem; 634 tune.t_minasmem = tune_t_minasmem; 635 tune.t_flckrec = tune_t_flckrec; 636 637 /* 638 * Initialization for file descriptors to correct mistaken settings in 639 * /etc/system. Initialization of limits performed by resource control 640 * system. 641 */ 642 if (rlim_fd_cur > rlim_fd_max) 643 rlim_fd_cur = rlim_fd_max; 644 645 /* 646 * calculations needed if hz was set in /etc/system 647 */ 648 if (hires_tick) 649 hz = hires_hz; 650 651 tick_per_msec = hz / MILLISEC; 652 msec_per_tick = MILLISEC / hz; 653 usec_per_tick = MICROSEC / hz; 654 nsec_per_tick = NANOSEC / hz; 655 max_hres_adj = nsec_per_tick >> ADJ_SHIFT; 656 } 657 658 /* 659 * Validate tuneable parameters following /etc/system processing, 660 * but prior to param_init(). 661 */ 662 void 663 param_check(void) 664 { 665 if (ngroups_max < NGROUPS_UMIN || ngroups_max > NGROUPS_UMAX) 666 ngroups_max = NGROUPS_MAX_DEFAULT; 667 668 if (autoup <= 0) { 669 autoup = DEFAULT_AUTOUP; 670 cmn_err(CE_WARN, "autoup <= 0; defaulting to %d", autoup); 671 } 672 673 if (tune_t_fsflushr <= 0) { 674 tune_t_fsflushr = DEFAULT_TUNE_T_FSFLUSHR; 675 cmn_err(CE_WARN, "tune_t_fsflushr <= 0; defaulting to %d", 676 tune_t_fsflushr); 677 } 678 679 if (jump_pid < 0 || jump_pid >= pidmax) { 680 jump_pid = 0; 681 cmn_err(CE_WARN, "jump_pid < 0 or >= pidmax; ignored"); 682 } 683 684 if (snoop_interval < SNOOP_INTERVAL_MIN) { 685 snoop_interval = SNOOP_INTERVAL_DEFAULT; 686 cmn_err(CE_WARN, "snoop_interval < minimum (%d); defaulting" 687 " to %d", SNOOP_INTERVAL_MIN, SNOOP_INTERVAL_DEFAULT); 688 } 689 } 690