1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2006 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _BSM_AUDIT_KERNEL_H 27 #define _BSM_AUDIT_KERNEL_H 28 29 #pragma ident "%Z%%M% %I% %E% SMI" 30 31 /* 32 * This file contains the basic auditing control structure definitions. 33 */ 34 35 #include <c2/audit_kevents.h> 36 #include <sys/priv_impl.h> 37 #include <sys/taskq.h> 38 #include <sys/zone.h> 39 40 #include <sys/tsol/label.h> 41 42 #ifdef __cplusplus 43 extern "C" { 44 #endif 45 46 /* 47 * This table contains the mapping from the system call ID to a corresponding 48 * audit event. 49 * 50 * au_init() is a function called at the beginning of the system call that 51 * performs any necessary setup/processing. It maps the call into the 52 * appropriate event, depending on the system call arguments. It is called 53 * by audit_start() from trap.c . 54 * 55 * au_event is the audit event associated with the system call. Most of the 56 * time it will map directly from the system call i.e. There is one system 57 * call associated with the event. In some cases, such as shmsys, or open, 58 * the au_start() function will map the system call to more than one event, 59 * depending on the system call arguments. 60 * 61 * au_start() is a function that provides per system call processing at the 62 * beginning of a system call. It is mainly concerned with preseving the 63 * audit record components that may be altered so that we can determine 64 * what the original paramater was before as well as after the system call. 65 * It is possible that au_start() may be taken away. It might be cleaner to 66 * define flags in au_ctrl to save a designated argument. For the moment we 67 * support both mechanisms, however the use of au_start() will be reviewed 68 * for 4.1.1 and CMW and ZEUS to see if such a general method is justified. 69 * 70 * au_finish() is a function that provides per system call processing at the 71 * completion of a system call. In certain circumstances, the type of audit 72 * event depends on intermidiate results during the processing of the system 73 * call. It is called in audit_finish() from trap.c . 74 * 75 * au_ctrl is a control vector that indicates what processing might have to 76 * be performed, even if there is no auditing for this system call. At 77 * present this is mostly for path processing for chmod, chroot. We need to 78 * process the path information in vfs_lookup, even when we are not auditing 79 * the system call in the case of chdir and chroot. 80 */ 81 /* 82 * Defines for au_ctrl 83 */ 84 #define S2E_SP PAD_SAVPATH /* save path for later use */ 85 #define S2E_MLD PAD_MLD /* only one lookup per system call */ 86 #define S2E_NPT PAD_NOPATH /* force no path in audit record */ 87 #define S2E_PUB PAD_PUBLIC_EV /* syscall is defined as a public op */ 88 89 /* 90 * At present, we are using the audit classes imbedded with in the kernel. Each 91 * event has a bit mask determining which classes the event is associated. 92 * The table audit_e2s maps the audit event ID to the audit state. 93 * 94 * Note that this may change radically. If we use a bit vector for the audit 95 * class, we can allow granularity at the event ID for each user. In this 96 * case, the vector would be determined at user level and passed to the kernel 97 * via the setaudit system call. 98 */ 99 100 /* 101 * The audit_pad structure holds paths for the current root and directory 102 * for the process, as well as for open files and directly manipulated objects. 103 * The reference count minimizes data copies since the process's current 104 * directory changes very seldom. 105 */ 106 struct audit_path { 107 uint_t audp_ref; /* reference count */ 108 uint_t audp_size; /* allocated size of this structure */ 109 uint_t audp_cnt; /* number of path sections */ 110 char *audp_sect[1]; /* path section pointers */ 111 /* audp_sect[0] is the path name */ 112 /* audp_sect[1+] are attribute paths */ 113 }; 114 115 /* 116 * The structure of the terminal ID within the kernel is different from the 117 * terminal ID in user space. It is a combination of port and IP address. 118 */ 119 120 struct au_termid { 121 dev_t at_port; 122 uint_t at_type; 123 uint_t at_addr[4]; 124 }; 125 typedef struct au_termid au_termid_t; 126 127 /* 128 * Attributes for deferring the queuing of an event. 129 */ 130 typedef struct au_defer_info { 131 struct au_defer_info *audi_next; /* next on linked list */ 132 void *audi_ad; /* audit record */ 133 int audi_e_type; /* audit event id */ 134 int audi_e_mod; /* audit event modifier */ 135 int audi_flag; /* au_close*() flags */ 136 timestruc_t audi_atime; /* audit event timestamp */ 137 } au_defer_info_t; 138 139 /* 140 * The structure p_audit_data hangs off of the process structure. It contains 141 * all of the audit information necessary to manage the audit record generation 142 * for each process. 143 * 144 * The pad_lock is constructed in the kmem_cache; the rest is combined 145 * in a sub structure so it can be copied/zeroed in one statement. 146 * 147 * The members have been reordered for maximum packing on 64 bit Solaris. 148 */ 149 struct p_audit_data { 150 kmutex_t pad_lock; /* lock pad data during changes */ 151 struct _pad_data { 152 struct audit_path *pad_root; /* process root path */ 153 struct audit_path *pad_cwd; /* process cwd path */ 154 au_mask_t pad_newmask; /* pending new mask */ 155 int pad_flags; 156 } pad_data; 157 }; 158 typedef struct p_audit_data p_audit_data_t; 159 160 #define pad_root pad_data.pad_root 161 #define pad_cwd pad_data.pad_cwd 162 #define pad_newmask pad_data.pad_newmask 163 #define pad_flags pad_data.pad_flags 164 165 /* 166 * Defines for pad_flags 167 */ 168 #define PAD_SETMASK 0x00000001 /* need to complete pending setmask */ 169 170 extern kmem_cache_t *au_pad_cache; 171 172 /* 173 * Defines for pad_ctrl 174 */ 175 #define PAD_SAVPATH 0x00000001 /* save path for further processing */ 176 #define PAD_MLD 0x00000002 /* system call involves MLD */ 177 #define PAD_NOPATH 0x00000004 /* force no paths in audit record */ 178 #define PAD_ABSPATH 0x00000008 /* path from lookup is absolute */ 179 #define PAD_NOATTRB 0x00000010 /* do not automatically add attribute */ 180 /* 0x20, 0x40 unused */ 181 #define PAD_LFLOAT 0x00000080 /* Label float */ 182 #define PAD_NOAUDIT 0x00000100 /* discard audit record */ 183 #define PAD_PATHFND 0x00000200 /* found path, don't retry lookup */ 184 #define PAD_SPRIV 0x00000400 /* succ priv use. extra audit_finish */ 185 #define PAD_FPRIV 0x00000800 /* fail priv use. extra audit_finish */ 186 #define PAD_SMAC 0x00001000 /* succ mac use. extra audit_finish */ 187 #define PAD_FMAC 0x00002000 /* fail mac use. extra audit_finish */ 188 #define PAD_AUDITME 0x00004000 /* audit me because of NFS operation */ 189 #define PAD_ATPATH 0x00008000 /* attribute file lookup */ 190 #define PAD_TRUE_CREATE 0x00010000 /* true create, file not found */ 191 #define PAD_CORE 0x00020000 /* save attribute during core dump */ 192 #define PAD_ERRJMP 0x00040000 /* abort record generation on error */ 193 #define PAD_PUBLIC_EV 0x00080000 /* syscall is defined as a public op */ 194 195 /* 196 * The structure t_audit_data hangs off of the thread structure. It contains 197 * all of the audit information necessary to manage the audit record generation 198 * for each thread. 199 * 200 */ 201 202 struct t_audit_data { 203 kthread_id_t tad_thread; /* DEBUG pointer to parent thread */ 204 unsigned int tad_scid; /* system call ID for finish */ 205 short tad_event; /* event for audit record */ 206 short tad_evmod; /* event modifier for audit record */ 207 int tad_ctrl; /* audit control/status flags */ 208 void *tad_errjmp; /* error longjmp (audit record aborted) */ 209 int tad_flag; /* to audit or not to audit */ 210 struct audit_path *tad_aupath; /* captured at vfs_lookup */ 211 struct audit_path *tad_atpath; /* openat prefix, path of fd */ 212 struct vnode *tad_vn; /* saved inode from vfs_lookup */ 213 caddr_t tad_ad; /* base of accumulated audit data */ 214 au_defer_info_t *tad_defer_head; /* queue of records to defer */ 215 /* until syscall end: */ 216 au_defer_info_t *tad_defer_tail; /* tail of defer queue */ 217 priv_set_t tad_sprivs; /* saved (success) used privs */ 218 priv_set_t tad_fprivs; /* saved (failed) used privs */ 219 }; 220 typedef struct t_audit_data t_audit_data_t; 221 222 /* 223 * The f_audit_data structure hangs off of the file structure. It contains 224 * three fields of data. The audit ID, the audit state, and a path name. 225 */ 226 227 struct f_audit_data { 228 kthread_id_t fad_thread; /* DEBUG creating thread */ 229 int fad_flags; /* audit control flags */ 230 struct audit_path *fad_aupath; /* path from vfs_lookup */ 231 }; 232 typedef struct f_audit_data f_audit_data_t; 233 234 #define FAD_READ 0x0001 /* read system call seen */ 235 #define FAD_WRITE 0x0002 /* write system call seen */ 236 237 #define P2A(p) (p->p_audit_data) 238 #define T2A(t) (t->t_audit_data) 239 #define U2A(u) (curthread->t_audit_data) 240 #define F2A(f) (f->f_audit_data) 241 242 #define u_ad ((U2A(u))->tad_ad) 243 #define ad_ctrl ((U2A(u))->tad_ctrl) 244 #define ad_flag ((U2A(u))->tad_flag) 245 246 #define AU_BUFSIZE 128 /* buffer size for the buffer pool */ 247 248 struct au_buff { 249 char buf[AU_BUFSIZE]; 250 struct au_buff *next_buf; 251 struct au_buff *next_rec; 252 ushort_t rec_len; 253 uchar_t len; 254 uchar_t flag; 255 }; 256 257 typedef struct au_buff au_buff_t; 258 259 /* 260 * Kernel audit queue structure. 261 */ 262 struct audit_queue { 263 au_buff_t *head; /* head of queue */ 264 au_buff_t *tail; /* tail of queue */ 265 ssize_t cnt; /* number elements on queue */ 266 size_t hiwater; /* high water mark to block */ 267 size_t lowater; /* low water mark to restart */ 268 size_t bufsz; /* audit trail write buffer size */ 269 size_t buflen; /* audit trail buffer length in use */ 270 clock_t delay; /* delay before flushing queue */ 271 int wt_block; /* writer is blocked (1) */ 272 int rd_block; /* reader is blocked (1) */ 273 kmutex_t lock; /* mutex lock for queue modification */ 274 kcondvar_t write_cv; /* sleep structure for write block */ 275 kcondvar_t read_cv; /* sleep structure for read block */ 276 }; 277 278 279 union rval; 280 struct audit_s2e { 281 au_event_t (*au_init)(au_event_t); 282 /* convert au_event to real audit event ID */ 283 284 int au_event; /* default audit event for this system call */ 285 void (*au_start)(struct t_audit_data *); 286 /* pre-system call audit processing */ 287 void (*au_finish)(struct t_audit_data *, int, union rval *); 288 /* post-system call audit processing */ 289 int au_ctrl; /* control flags for auditing actions */ 290 }; 291 292 extern struct audit_s2e audit_s2e[]; 293 294 #define AUK_VALID 0x5A5A5A5A 295 #define AUK_INVALID 0 296 /* 297 * per zone audit context 298 */ 299 struct au_kcontext { 300 uint32_t auk_valid; 301 zoneid_t auk_zid; 302 303 boolean_t auk_hostaddr_valid; 304 int auk_sequence; 305 int auk_auditstate; 306 int auk_output_active; 307 struct vnode *auk_current_vp; 308 int auk_policy; 309 310 struct audit_queue auk_queue; 311 312 char *auk_buffer; /* auditsvc output */ 313 au_dbuf_t *auk_dbuffer; /* auditdoor output */ 314 315 au_stat_t auk_statistics; 316 317 struct auditinfo_addr auk_info; 318 kmutex_t auk_eagain_mutex; /* door call retry */ 319 kcondvar_t auk_eagain_cv; 320 kmutex_t auk_fstat_lock; /* audit file statistics lock */ 321 au_fstat_t auk_file_stat; /* file statistics */ 322 323 taskq_t *auk_taskq; /* output thread */ 324 325 /* Only one audit svc per zone at a time */ 326 kmutex_t auk_svc_lock; 327 /* 1 during auditsvc, 2 during auditdoor */ 328 int auk_svc_busy; 329 au_state_t auk_ets[MAX_KEVENTS + 1]; 330 }; 331 #ifndef AUK_CONTEXT_T 332 #define AUK_CONTEXT_T 333 typedef struct au_kcontext au_kcontext_t; 334 #endif 335 336 extern zone_key_t au_zone_key; 337 338 /* 339 * Kernel auditing external variables 340 */ 341 extern int audit_policy; 342 extern int audit_active; 343 extern int audit_load; 344 extern int au_auditstate; 345 346 extern struct audit_queue au_queue; 347 extern struct p_audit_data *pad0; 348 extern struct t_audit_data *tad0; 349 350 /* 351 * audit_path support routines 352 */ 353 void au_pathhold(struct audit_path *); 354 void au_pathrele(struct audit_path *); 355 struct audit_path *au_pathdup(const struct audit_path *, int, int); 356 357 /* 358 * Macros to hide asynchronous, non-blocking audit record start and finish 359 * processing. 360 * 361 * NOTE: must be used in (void) funcction () { ... } 362 */ 363 364 #define AUDIT_ASYNC_START(rp, audit_event, sorf) \ 365 { \ 366 label_t jb; \ 367 if (setjmp(&jb)) { \ 368 /* cleanup any residual audit data */ \ 369 audit_async_drop((caddr_t *)&(rp), 0); \ 370 return; \ 371 } \ 372 /* auditing enabled and we're preselected for this event? */ \ 373 if (audit_async_start(&jb, audit_event, sorf)) { \ 374 return; \ 375 } \ 376 } 377 378 #define AUDIT_ASYNC_FINISH(rp, audit_event, event_modifier) \ 379 audit_async_finish((caddr_t *)&(rp), audit_event, event_modifier); 380 381 382 #ifdef _KERNEL 383 au_buff_t *au_get_buff(void), *au_free_buff(au_buff_t *); 384 #endif 385 386 /* 387 * Macro for uniform "subject" token(s) generation 388 */ 389 #define AUDIT_SETSUBJ(u, c, a, k) \ 390 au_write((u), \ 391 au_to_subject(crgetuid(c), \ 392 crgetgid(c), crgetruid(c), \ 393 crgetrgid(c), curproc->p_pid, \ 394 (a)->ai_auid, (a)->ai_asid, \ 395 &((a)->ai_termid))); \ 396 if (is_system_labeled()) \ 397 au_write((u), \ 398 au_to_label(CR_SL((c)))); \ 399 if ((k)->auk_policy & AUDIT_GROUP) \ 400 au_write((u), \ 401 au_to_groups(crgetgroups(c),\ 402 crgetngroups(c))) 403 404 /* 405 * Macros for type conversion 406 */ 407 408 /* au_membuf head, to typed data */ 409 #define memtod(x, t) ((t)x->buf) 410 411 /* au_membuf types */ 412 #define MT_FREE 0 /* should be on free list */ 413 #define MT_DATA 1 /* dynamic (data) allocation */ 414 415 /* flags to au_memget */ 416 #define DONTWAIT 0 417 #define WAIT 1 418 419 #define AU_PACK 1 /* pack data in au_append_rec() */ 420 #define AU_LINK 0 /* link data in au_append_rec() */ 421 422 /* flags to async routines */ 423 #define AU_BACKEND 1 /* called from softcall backend */ 424 425 #ifdef __cplusplus 426 } 427 #endif 428 429 #endif /* _BSM_AUDIT_KERNEL_H */ 430