1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License, Version 1.0 only 6# (the "License"). You may not use this file except in compliance 7# with the License. 8# 9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10# or http://www.opensolaris.org/os/licensing. 11# See the License for the specific language governing permissions 12# and limitations under the License. 13# 14# When distributing Covered Code, include this CDDL HEADER in each 15# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16# If applicable, add the following below this CDDL HEADER, with the 17# fields enclosed by brackets "[]" replaced with your own identifying 18# information: Portions Copyright [yyyy] [name of copyright owner] 19# 20# CDDL HEADER END 21# 22# 23#ident "%Z%%M% %I% %E% SMI" 24# 25# Copyright 2005 Sun Microsystems, Inc. All rights reserved. 26# Use is subject to license terms. 27# 28# Configuration variables for the runtime environment of the nightly 29# build script and other tools for construction and packaging of releases. 30# This script is sourced by 'nightly' and 'bldenv' to set up the environment 31# for the build. This example is suitable for building a gate, 32# which will contain the resulting packages and archives (builds of the gate 33# are done in children and then the resulting archives, packages, and proto 34# area are put into the parent for everyone to use). It is based off 35# the onnv release. It sets NIGHTLY_OPTIONS to make nightly do: 36# DEBUG and non-DEBUG builds (-D) 37# creates cpio archives for bfu (-a) 38# creates packages for PIT/RE (-p) 39# checks for new interfaces in libraries (-A) 40# runs 'make check' (-C) 41# runs lint in usr/src (-l plus the LINTDIRS variable) 42# sends mail on completion (-m and the MAILTO variable) 43# updates the protolist in the parent for children to compare with (-u) 44# updates the proto area in the parent when done (-U) 45# checks for changes in ELF runpaths (-r) 46# checks for changes in unreferenced files (-f) 47# use dmake instead of pmake (-d) 48# 49NIGHTLY_OPTIONS="-aADClmpuUrfd"; export NIGHTLY_OPTIONS 50 51# This is a variable for the rest of the script - GATE doesn't matter to 52# nightly itself 53GATE=onnv-gate; export GATE 54 55# CODEMGR_WS - where is your workspace at (or what should nightly name it) 56# there is only one definition here, which assumes all the gate build machines 57# (sparc and x86) are set up the same. But remember, this is a script, so 58# you _could_ look at $MACH or `uname -n` and set these variables differently. 59CODEMGR_WS="/builds/$GATE"; export CODEMGR_WS 60 61# PARENT_WS is used to determine the parent of this workspace. This is 62# for the options that deal with the parent workspace (such as where the 63# proto area will go). 64PARENT_WS="/ws/$GATE"; export PARENT_WS 65 66# CLONE_WS is the workspace nightly should do a bringover from. Since it's 67# going to bringover usr/src, this could take a while, so we use the 68# clone instead of the gate (see the gate's README). 69CLONE_WS="/ws/onnv-clone"; export CLONE_WS 70 71# This flag controls whether to build the closed source. If 72# undefined, nightly(1) and bldenv(1) will set it according to whether 73# the closed tree is present. 74# CLOSED_IS_PRESENT="yes"; export CLOSED_IS_PRESENT 75 76# The bringover, if any, is done as STAFFER. 77# Set STAFFER to your own login as gatekeeper or integration engineer. 78# The point is to use group "staff" and avoid referencing the parent 79# workspace as root. 80# Some scripts optionally send mail messages to MAILTO. 81# 82STAFFER=nobody; export STAFFER 83MAILTO=$STAFFER; export MAILTO 84 85# The project (see project(4)) under which to run this build. If not 86# specified, the build is simply run in a new task in the current project. 87BUILD_PROJECT=; export BUILD_PROJECT 88 89# You should not need to change the next four lines 90LOCKNAME="`basename $CODEMGR_WS`_nightly.lock"; export LOCKNAME 91ATLOG="$CODEMGR_WS/log"; export ATLOG 92LOGFILE="$ATLOG/nightly.log"; export LOGFILE 93MACH=`uname -p`; export MACH 94 95# REF_PROTO_LIST - for comparing the list of stuff in your proto area 96# with. Generally this should be left alone, since you want to see differences 97# between todays build and yesterdays. 98# 99REF_PROTO_LIST=$PARENT_WS/usr/src/proto_list_${MACH}; export REF_PROTO_LIST 100 101# where cpio archives of the OS are placed. Usually this should be left 102# alone too. Here they don't go in the build workspace, but in the parent. 103# Since this is done as root, the build machine needs root acces to 104# the parent over NFS. 105CPIODIR="${PARENT_WS}/archives/${MACH}/nightly"; export CPIODIR 106 107# 108# build environment variables, including version info for mcs, motd, 109# motd, uname and boot messages. Mostly you shouldn't change this except 110# when the release slips (nah) or when starting a new release. 111# 112ROOT="$CODEMGR_WS/proto/root_${MACH}"; export ROOT 113SRC="$CODEMGR_WS/usr/src"; export SRC 114VERSION="$GATE"; export VERSION 115 116# the source product has no SCCS history, and is modified to remove source 117# that cannot be shipped. EXPORT_SRC is where the clear files are copied, then 118# modified with 'make EXPORT_SRC'. 119EXPORT_SRC="$CODEMGR_WS/export_src"; export EXPORT_SRC 120 121# CRYPT_SRC is similar to EXPORT_SRC, but after 'make CRYPT_SRC' the files in 122# xmod/cry_files are saved. They are dropped on the exportable source to create 123# the domestic build. 124CRYPT_SRC="$CODEMGR_WS/crypt_src"; export CRYPT_SRC 125 126# 127# the RELEASE and RELEASE_DATE variables are set in Makefile.master; 128# there might be special reasons to override them here, but that 129# should not be the case in general 130# 131# RELEASE="5.10.1"; export RELEASE 132# RELEASE_DATE="October 2007"; export RELEASE_DATE 133 134# proto area in parent for optionally depositing a copy of headers and 135# libraries corresponding to the protolibs target 136# 137PARENT_ROOT=$PARENT_WS/proto/root_$MACH; export PARENT_ROOT 138 139# 140# package creation variable. This put the packages in the parent. 141# 142PKGARCHIVE="${PARENT_WS}/packages/${MACH}/nightly"; export PKGARCHIVE 143 144# we want make to do as much as it can, just in case there's more than 145# one problem. This is especially important with the gate, since multiple 146# unrelated broken things can be integrated. 147MAKEFLAGS=k; export MAKEFLAGS 148 149# Magic variable to prevent the devpro compilers/teamware from sending 150# mail back to devpro on every use. 151UT_NO_USAGE_TRACKING="1"; export UT_NO_USAGE_TRACKING 152 153# Build tools - don't set these unless you know what you're doing. These 154# variables allows you to get the compilers and onbld files locally or 155# through cachefs. Set BUILD_TOOLS to pull everything from one location. 156# Alternately, you can set ONBLD_TOOLS to where you keep the contents of 157# SUNWonbld and SPRO_ROOT to where you keep the compilers. 158# 159#BUILD_TOOLS=/opt; export BUILD_TOOLS 160#ONBLD_TOOLS=/opt/onbld; export ONBLD_TOOLS 161#SPRO_ROOT=/opt/SUNspro; export SPRO_ROOT 162 163# This goes along with lint - it is a series of the form "A [y|n]" which 164# means "go to directory A and run 'make lint'" Then mail me (y) the 165# difference in the lint output. 'y' should only be used if the area you're 166# linting is actually lint clean or you'll get lots of mail. 167# You shouldn't need to change this though. 168#LINTDIRS="$SRC y"; export LINTDIRS 169 170# 171# NT server for realmode builds 172# 173#NTSERVER=<hostname>; export NTSERVER 174 175# 176# Reference to IA32 IHV workspace, proto area and packages 177# 178#IA32_IHV_WS=/ws/${GATE}-ihv; export IA32_IHV_WS 179#IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386; export IA32_IHV_ROOT 180#IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly; export IA32_IHV_PKGS 181 182# 183# Reference to binary-only IA32 IHV packages (for boot floppy construction) 184# 185#IA32_IHV_BINARY_PKGS=/ws/${GATE}_ihv_bin 186#export IA32_IHV_BINARY_PKGS 187 188# 189# Boot floppy proto area 190# 191#DCB_ROOT="${CODEMGR_WS}/proto/root_dcb_${MACH}" 192#BOOTFLOPPY_ROOT="${CODEMGR_WS}/proto/root_BootFloppy_${MACH}" 193#export DCB_ROOT 194#export BOOTFLOPPY_ROOT 195 196# 197# Destination for sparc realmode package SUNWrmodu 198# 199#SPARC_RM_PKGARCHIVE="${CODEMGR_WS}/packages/sparc_realmode/nightly" 200#export SPARC_RM_PKGARCHIVE 201 202# REF_PROTO_LIST_DCB & REF_PROTO_LIST_BOOTFLOPPY 203# To compare the list of stuff in your DCB and BootFloppy proto areas 204# against. Generally this should be left alone, since you want to see 205# differences between todays build and yesterdays. 206# 207#REF_PROTO_LIST_DCB=$PARENT_WS/usr/src/realmode/proto_list_dcb_${MACH} 208#REF_PROTO_LIST_BOOTFLOPPY=$PARENT_WS/usr/src/realmode/proto_list_bootfloppy_${MACH} 209#export REF_PROTO_LIST_DCB 210#export REF_PROTO_LIST_BOOTFLOPPY 211 212# Set this flag to 'n' to disable the automatic validation of the dmake 213# version in use. The default is to check it. 214#CHECK_DMAKE=y 215 216# Set this flag to 'n' to disable the use of 'checkpaths'. The default, 217# if the 'N' option is not specified, is to run this test. 218#CHECK_PATHS=y 219 220# Set this flag to 'y' to enable the use of elfsigncmp to validate the 221# output of elfsign. Doing so requires that 't' be set in NIGHTLY_OPTIONS. 222# The default is to not verify them. 223#VERIFY_ELFSIGN=n 224 225# BRINGOVER_FILES is the list of files nightly passes to bringover. 226# If not set the default is "usr", but it can be used for bringing 227# over deleted_files or other nifty directories. 228#BRINGOVER_FILES="usr deleted_files" 229