1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21 22# 23# Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24# Use is subject to license terms. 25# 26 27# Configuration variables for the runtime environment of the nightly 28# build script and other tools for construction and packaging of releases. 29# This script is sourced by 'nightly' and 'bldenv' to set up the environment 30# for the build. This example is suitable for building a gate, 31# which will contain the resulting packages and archives (builds of the gate 32# are done in children and then the resulting archives, packages, and proto 33# area are put into the parent for everyone to use). It is based off 34# the onnv release. It sets NIGHTLY_OPTIONS to make nightly do: 35# DEBUG and non-DEBUG builds (-D) 36# creates a globalization package (-0) 37# creates cpio archives for bfu (-a) 38# creates packages for PIT/RE (-p) 39# checks for new interfaces in libraries (-A) 40# runs 'make check' (-C) 41# runs lint in usr/src (-l plus the LINTDIRS variable) 42# sends mail on completion (-m and the MAILTO variable) 43# updates the protolist in the parent for children to compare with (-u) 44# updates the proto area in the parent when done (-U) 45# checks for changes in ELF runpaths (-r) 46# checks for changes in unreferenced files (-f) 47# 48NIGHTLY_OPTIONS="-0aADClmpuUrf"; export NIGHTLY_OPTIONS 49 50# This is a variable for the rest of the script - GATE doesn't matter to 51# nightly itself 52GATE=onnv-gate; export GATE 53 54# CODEMGR_WS - where is your workspace at (or what should nightly name it) 55# there is only one definition here, which assumes all the gate build machines 56# (sparc and x86) are set up the same. But remember, this is a script, so 57# you _could_ look at $MACH or `uname -n` and set these variables differently. 58CODEMGR_WS="/builds/$GATE"; export CODEMGR_WS 59 60# G11N_PKGDIR - where does the globalization package live 61G11N_PKGDIR="$CODEMGR_WS/usr/src/pkgdefs/SUNW0on"; export G11N_PKGDIR 62 63# PARENT_WS is used to determine the parent of this workspace. This is 64# for the options that deal with the parent workspace (such as where the 65# proto area will go). 66# 67# If you use this, it must be local (or nfs): nightly cannot copy 68# over ssh or http. 69PARENT_WS="/ws/$GATE"; export PARENT_WS 70 71# CLONE_WS is the workspace nightly should do a bringover from. 72CLONE_WS="ssh://anonhg@onnv.sfbay.sun.com//export/onnv-clone"; export CLONE_WS 73 74# CLOSED_CLONE_WS is the workspace from which nightly will acquire the 75# usr/closed tree. 76CLOSED_CLONE_WS="${CLONE_WS}/usr/closed" 77export CLOSED_CLONE_WS 78 79# This flag controls whether to build the closed source. If 80# undefined, nightly(1) and bldenv(1) will set it according to whether 81# the closed source tree is present. CLOSED_IS_PRESENT="no" means not 82# building the closed sources. 83# CLOSED_IS_PRESENT="yes"; export CLOSED_IS_PRESENT 84 85# The bringover, if any, is done as STAFFER. 86# Set STAFFER to your own login as gatekeeper or integration engineer. 87# The point is to use group "staff" and avoid referencing the parent 88# workspace as root. 89# Some scripts optionally send mail messages to MAILTO. 90# 91STAFFER=nobody; export STAFFER 92MAILTO=$STAFFER; export MAILTO 93 94# The project (see project(4)) under which to run this build. If not 95# specified, the build is simply run in a new task in the current project. 96BUILD_PROJECT=; export BUILD_PROJECT 97 98# You should not need to change the next four lines 99LOCKNAME="`basename $CODEMGR_WS`_nightly.lock"; export LOCKNAME 100ATLOG="$CODEMGR_WS/log"; export ATLOG 101LOGFILE="$ATLOG/nightly.log"; export LOGFILE 102MACH=`uname -p`; export MACH 103 104# REF_PROTO_LIST - for comparing the list of stuff in your proto area 105# with. Generally this should be left alone, since you want to see differences 106# between todays build and yesterdays. 107# 108REF_PROTO_LIST=$PARENT_WS/usr/src/proto_list_${MACH}; export REF_PROTO_LIST 109 110# where cpio archives of the OS are placed. Usually this should be left 111# alone too. Here they don't go in the build workspace, but in the parent. 112# Since this is done as root, the build machine needs root acces to 113# the parent over NFS. 114CPIODIR="${PARENT_WS}/archives/${MACH}/nightly"; export CPIODIR 115 116# 117# build environment variables, including version info for mcs, motd, 118# motd, uname and boot messages. Mostly you shouldn't change this except 119# when the release slips (nah) or when starting a new release. 120# 121ROOT="$CODEMGR_WS/proto/root_${MACH}"; export ROOT 122SRC="$CODEMGR_WS/usr/src"; export SRC 123VERSION="$GATE"; export VERSION 124 125# 126# the RELEASE and RELEASE_DATE variables are set in Makefile.master; 127# there might be special reasons to override them here, but that 128# should not be the case in general 129# 130# RELEASE="5.10.1"; export RELEASE 131# RELEASE_DATE="October 2007"; export RELEASE_DATE 132 133# proto area in parent for optionally depositing a copy of headers and 134# libraries corresponding to the protolibs target 135# 136PARENT_ROOT=$PARENT_WS/proto/root_$MACH; export PARENT_ROOT 137 138# 139# package creation variable. This put the packages in the parent. 140# 141PKGARCHIVE="${PARENT_WS}/packages/${MACH}/nightly"; export PKGARCHIVE 142 143# we want make to do as much as it can, just in case there's more than 144# one problem. This is especially important with the gate, since multiple 145# unrelated broken things can be integrated. 146MAKEFLAGS=k; export MAKEFLAGS 147 148# Magic variable to prevent the devpro compilers/teamware from sending 149# mail back to devpro on every use. 150UT_NO_USAGE_TRACKING="1"; export UT_NO_USAGE_TRACKING 151 152# Build tools - don't set these unless you know what you're doing. These 153# variables allows you to get the compilers and onbld files locally or 154# through cachefs. Set BUILD_TOOLS to pull everything from one location. 155# Alternately, you can set ONBLD_TOOLS to where you keep the contents of 156# SUNWonbld and SPRO_ROOT to where you keep the compilers. 157# 158#BUILD_TOOLS=/opt; export BUILD_TOOLS 159#ONBLD_TOOLS=/opt/onbld; export ONBLD_TOOLS 160#SPRO_ROOT=/opt/SUNspro; export SPRO_ROOT 161 162# This goes along with lint - it is a series of the form "A [y|n]" which 163# means "go to directory A and run 'make lint'" Then mail me (y) the 164# difference in the lint output. 'y' should only be used if the area you're 165# linting is actually lint clean or you'll get lots of mail. 166# You shouldn't need to change this though. 167#LINTDIRS="$SRC y"; export LINTDIRS 168 169# 170# Reference to IA32 IHV workspace, proto area and packages 171# 172#IA32_IHV_WS=/ws/${GATE}-ihv; export IA32_IHV_WS 173#IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386; export IA32_IHV_ROOT 174#IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly; export IA32_IHV_PKGS 175 176# 177# Reference to binary-only IA32 IHV packages 178# 179#IA32_IHV_BINARY_PKGS=/ws/${GATE}-ihv-bin 180#export IA32_IHV_BINARY_PKGS 181 182# 183# Destination for sparc realmode package SUNWrmodu 184# 185#SPARC_RM_PKGARCHIVE="${CODEMGR_WS}/packages/sparc_realmode/nightly" 186#export SPARC_RM_PKGARCHIVE 187 188# Set this flag to 'n' to disable the automatic validation of the dmake 189# version in use. The default is to check it. 190#CHECK_DMAKE=y 191 192# Set this flag to 'n' to disable the use of 'checkpaths'. The default, 193# if the 'N' option is not specified, is to run this test. 194#CHECK_PATHS=y 195 196# Set this flag to 'y' to enable the use of elfsigncmp to validate the 197# output of elfsign. Doing so requires that 't' be set in NIGHTLY_OPTIONS. 198# The default is to not verify them. 199#VERIFY_ELFSIGN=n 200 201# BRINGOVER_FILES is the list of files nightly passes to bringover. 202# If not set the default is "usr", but it can be used for bringing 203# over deleted_files or other nifty directories. 204#BRINGOVER_FILES="usr deleted_files" 205 206# POST_NIGHTLY can be any command to be run at the end of nightly. See 207# nightly(1) for interactions between environment variables and this command. 208#POST_NIGHTLY= 209