1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21 22# 23# Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24# Use is subject to license terms. 25# 26 27# Configuration variables for the runtime environment of the nightly 28# build script and other tools for construction and packaging of releases. 29# This script is sourced by 'nightly' and 'bldenv' to set up the environment 30# for the build. This example is suitable for building a gate, 31# which will contain the resulting packages and archives (builds of the gate 32# are done in children and then the resulting archives, packages, and proto 33# area are put into the parent for everyone to use). It is based off 34# the onnv release. It sets NIGHTLY_OPTIONS to make nightly do: 35# DEBUG and non-DEBUG builds (-D) 36# creates cpio archives for bfu (-a) 37# creates packages for PIT/RE (-p) 38# checks for new interfaces in libraries (-A) 39# runs 'make check' (-C) 40# runs lint in usr/src (-l plus the LINTDIRS variable) 41# sends mail on completion (-m and the MAILTO variable) 42# updates the protolist in the parent for children to compare with (-u) 43# updates the proto area in the parent when done (-U) 44# checks for changes in ELF runpaths (-r) 45# checks for changes in unreferenced files (-f) 46# 47NIGHTLY_OPTIONS="-aADClmpuUrf"; export NIGHTLY_OPTIONS 48 49# This is a variable for the rest of the script - GATE doesn't matter to 50# nightly itself 51GATE=onnv-gate; export GATE 52 53# CODEMGR_WS - where is your workspace at (or what should nightly name it) 54# there is only one definition here, which assumes all the gate build machines 55# (sparc and x86) are set up the same. But remember, this is a script, so 56# you _could_ look at $MACH or `uname -n` and set these variables differently. 57CODEMGR_WS="/builds/$GATE"; export CODEMGR_WS 58 59# PARENT_WS is used to determine the parent of this workspace. This is 60# for the options that deal with the parent workspace (such as where the 61# proto area will go). 62# 63# If you use this, it must be local (or nfs): nightly cannot copy 64# over ssh or http. 65PARENT_WS="/ws/$GATE"; export PARENT_WS 66 67# CLONE_WS is the workspace nightly should do a bringover from. 68CLONE_WS="ssh://anonhg@onnv.sfbay.sun.com//export/onnv-clone"; export CLONE_WS 69 70# CLOSED_CLONE_WS is the workspace from which nightly will acquire the 71# usr/closed tree. 72CLOSED_CLONE_WS="${CLONE_WS}/usr/closed" 73export CLOSED_CLONE_WS 74 75# This flag controls whether to build the closed source. If 76# undefined, nightly(1) and bldenv(1) will set it according to whether 77# the closed source tree is present. CLOSED_IS_PRESENT="no" means not 78# building the closed sources. 79# CLOSED_IS_PRESENT="yes"; export CLOSED_IS_PRESENT 80 81# The bringover, if any, is done as STAFFER. 82# Set STAFFER to your own login as gatekeeper or integration engineer. 83# The point is to use group "staff" and avoid referencing the parent 84# workspace as root. 85# Some scripts optionally send mail messages to MAILTO. 86# 87STAFFER=nobody; export STAFFER 88MAILTO=$STAFFER; export MAILTO 89 90# The project (see project(4)) under which to run this build. If not 91# specified, the build is simply run in a new task in the current project. 92BUILD_PROJECT=; export BUILD_PROJECT 93 94# You should not need to change the next four lines 95LOCKNAME="`basename $CODEMGR_WS`_nightly.lock"; export LOCKNAME 96ATLOG="$CODEMGR_WS/log"; export ATLOG 97LOGFILE="$ATLOG/nightly.log"; export LOGFILE 98MACH=`uname -p`; export MACH 99 100# REF_PROTO_LIST - for comparing the list of stuff in your proto area 101# with. Generally this should be left alone, since you want to see differences 102# between todays build and yesterdays. 103# 104REF_PROTO_LIST=$PARENT_WS/usr/src/proto_list_${MACH}; export REF_PROTO_LIST 105 106# where cpio archives of the OS are placed. Usually this should be left 107# alone too. Here they don't go in the build workspace, but in the parent. 108# Since this is done as root, the build machine needs root acces to 109# the parent over NFS. 110CPIODIR="${PARENT_WS}/archives/${MACH}/nightly"; export CPIODIR 111 112# 113# build environment variables, including version info for mcs, motd, 114# motd, uname and boot messages. Mostly you shouldn't change this except 115# when the release slips (nah) or when starting a new release. 116# 117ROOT="$CODEMGR_WS/proto/root_${MACH}"; export ROOT 118SRC="$CODEMGR_WS/usr/src"; export SRC 119VERSION="$GATE"; export VERSION 120 121# 122# the RELEASE and RELEASE_DATE variables are set in Makefile.master; 123# there might be special reasons to override them here, but that 124# should not be the case in general 125# 126# RELEASE="5.10.1"; export RELEASE 127# RELEASE_DATE="October 2007"; export RELEASE_DATE 128 129# proto area in parent for optionally depositing a copy of headers and 130# libraries corresponding to the protolibs target 131# 132PARENT_ROOT=$PARENT_WS/proto/root_$MACH; export PARENT_ROOT 133 134# 135# package creation variable. This put the packages in the parent. 136# 137PKGARCHIVE="${PARENT_WS}/packages/${MACH}/nightly"; export PKGARCHIVE 138 139# we want make to do as much as it can, just in case there's more than 140# one problem. This is especially important with the gate, since multiple 141# unrelated broken things can be integrated. 142MAKEFLAGS=k; export MAKEFLAGS 143 144# Magic variable to prevent the devpro compilers/teamware from sending 145# mail back to devpro on every use. 146UT_NO_USAGE_TRACKING="1"; export UT_NO_USAGE_TRACKING 147 148# Build tools - don't set these unless you know what you're doing. These 149# variables allows you to get the compilers and onbld files locally or 150# through cachefs. Set BUILD_TOOLS to pull everything from one location. 151# Alternately, you can set ONBLD_TOOLS to where you keep the contents of 152# SUNWonbld and SPRO_ROOT to where you keep the compilers. 153# 154#BUILD_TOOLS=/opt; export BUILD_TOOLS 155#ONBLD_TOOLS=/opt/onbld; export ONBLD_TOOLS 156#SPRO_ROOT=/opt/SUNspro; export SPRO_ROOT 157 158# This goes along with lint - it is a series of the form "A [y|n]" which 159# means "go to directory A and run 'make lint'" Then mail me (y) the 160# difference in the lint output. 'y' should only be used if the area you're 161# linting is actually lint clean or you'll get lots of mail. 162# You shouldn't need to change this though. 163#LINTDIRS="$SRC y"; export LINTDIRS 164 165# 166# Reference to IA32 IHV workspace, proto area and packages 167# 168#IA32_IHV_WS=/ws/${GATE}-ihv; export IA32_IHV_WS 169#IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386; export IA32_IHV_ROOT 170#IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly; export IA32_IHV_PKGS 171 172# 173# Reference to binary-only IA32 IHV packages 174# 175#IA32_IHV_BINARY_PKGS=/ws/${GATE}-ihv-bin 176#export IA32_IHV_BINARY_PKGS 177 178# 179# Destination for sparc realmode package SUNWrmodu 180# 181#SPARC_RM_PKGARCHIVE="${CODEMGR_WS}/packages/sparc_realmode/nightly" 182#export SPARC_RM_PKGARCHIVE 183 184# Set this flag to 'n' to disable the automatic validation of the dmake 185# version in use. The default is to check it. 186#CHECK_DMAKE=y 187 188# Set this flag to 'n' to disable the use of 'checkpaths'. The default, 189# if the 'N' option is not specified, is to run this test. 190#CHECK_PATHS=y 191 192# Set this flag to 'y' to enable the use of elfsigncmp to validate the 193# output of elfsign. Doing so requires that 't' be set in NIGHTLY_OPTIONS. 194# The default is to not verify them. 195#VERIFY_ELFSIGN=n 196 197# BRINGOVER_FILES is the list of files nightly passes to bringover. 198# If not set the default is "usr", but it can be used for bringing 199# over deleted_files or other nifty directories. 200#BRINGOVER_FILES="usr deleted_files" 201 202# POST_NIGHTLY can be any command to be run at the end of nightly. See 203# nightly(1) for interactions between environment variables and this command. 204#POST_NIGHTLY= 205