1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# 22#ident "%Z%%M% %I% %E% SMI" 23# 24# Copyright 2006 Sun Microsystems, Inc. All rights reserved. 25# Use is subject to license terms. 26# 27# Configuration variables for the runtime environment of the nightly 28# build script and other tools for construction and packaging of releases. 29# This script is sourced by 'nightly' and 'bldenv' to set up the environment 30# for the build. This example is suitable for building a gate, 31# which will contain the resulting packages and archives (builds of the gate 32# are done in children and then the resulting archives, packages, and proto 33# area are put into the parent for everyone to use). It is based off 34# the onnv release. It sets NIGHTLY_OPTIONS to make nightly do: 35# DEBUG and non-DEBUG builds (-D) 36# creates cpio archives for bfu (-a) 37# creates packages for PIT/RE (-p) 38# checks for new interfaces in libraries (-A) 39# runs 'make check' (-C) 40# runs lint in usr/src (-l plus the LINTDIRS variable) 41# sends mail on completion (-m and the MAILTO variable) 42# updates the protolist in the parent for children to compare with (-u) 43# updates the proto area in the parent when done (-U) 44# checks for changes in ELF runpaths (-r) 45# checks for changes in unreferenced files (-f) 46# 47NIGHTLY_OPTIONS="-aADClmpuUrf"; export NIGHTLY_OPTIONS 48 49# This is a variable for the rest of the script - GATE doesn't matter to 50# nightly itself 51GATE=onnv-gate; export GATE 52 53# CODEMGR_WS - where is your workspace at (or what should nightly name it) 54# there is only one definition here, which assumes all the gate build machines 55# (sparc and x86) are set up the same. But remember, this is a script, so 56# you _could_ look at $MACH or `uname -n` and set these variables differently. 57CODEMGR_WS="/builds/$GATE"; export CODEMGR_WS 58 59# PARENT_WS is used to determine the parent of this workspace. This is 60# for the options that deal with the parent workspace (such as where the 61# proto area will go). 62PARENT_WS="/ws/$GATE"; export PARENT_WS 63 64# CLONE_WS is the workspace nightly should do a bringover from. Since it's 65# going to bringover usr/src, this could take a while, so we use the 66# clone instead of the gate (see the gate's README). 67CLONE_WS="/ws/onnv-clone"; export CLONE_WS 68 69# This flag controls whether to build the closed source. If 70# undefined, nightly(1) and bldenv(1) will set it according to whether 71# the closed tree is present. 72# CLOSED_IS_PRESENT="yes"; export CLOSED_IS_PRESENT 73 74# The bringover, if any, is done as STAFFER. 75# Set STAFFER to your own login as gatekeeper or integration engineer. 76# The point is to use group "staff" and avoid referencing the parent 77# workspace as root. 78# Some scripts optionally send mail messages to MAILTO. 79# 80STAFFER=nobody; export STAFFER 81MAILTO=$STAFFER; export MAILTO 82 83# The project (see project(4)) under which to run this build. If not 84# specified, the build is simply run in a new task in the current project. 85BUILD_PROJECT=; export BUILD_PROJECT 86 87# You should not need to change the next four lines 88LOCKNAME="`basename $CODEMGR_WS`_nightly.lock"; export LOCKNAME 89ATLOG="$CODEMGR_WS/log"; export ATLOG 90LOGFILE="$ATLOG/nightly.log"; export LOGFILE 91MACH=`uname -p`; export MACH 92 93# REF_PROTO_LIST - for comparing the list of stuff in your proto area 94# with. Generally this should be left alone, since you want to see differences 95# between todays build and yesterdays. 96# 97REF_PROTO_LIST=$PARENT_WS/usr/src/proto_list_${MACH}; export REF_PROTO_LIST 98 99# where cpio archives of the OS are placed. Usually this should be left 100# alone too. Here they don't go in the build workspace, but in the parent. 101# Since this is done as root, the build machine needs root acces to 102# the parent over NFS. 103CPIODIR="${PARENT_WS}/archives/${MACH}/nightly"; export CPIODIR 104 105# 106# build environment variables, including version info for mcs, motd, 107# motd, uname and boot messages. Mostly you shouldn't change this except 108# when the release slips (nah) or when starting a new release. 109# 110ROOT="$CODEMGR_WS/proto/root_${MACH}"; export ROOT 111SRC="$CODEMGR_WS/usr/src"; export SRC 112VERSION="$GATE"; export VERSION 113 114# the source product has no SCCS history, and is modified to remove source 115# that cannot be shipped. EXPORT_SRC is where the clear files are copied, then 116# modified with 'make EXPORT_SRC'. 117EXPORT_SRC="$CODEMGR_WS/export_src"; export EXPORT_SRC 118 119# CRYPT_SRC is similar to EXPORT_SRC, but after 'make CRYPT_SRC' the files in 120# xmod/cry_files are saved. They are dropped on the exportable source to create 121# the domestic build. 122CRYPT_SRC="$CODEMGR_WS/crypt_src"; export CRYPT_SRC 123 124# 125# the RELEASE and RELEASE_DATE variables are set in Makefile.master; 126# there might be special reasons to override them here, but that 127# should not be the case in general 128# 129# RELEASE="5.10.1"; export RELEASE 130# RELEASE_DATE="October 2007"; export RELEASE_DATE 131 132# proto area in parent for optionally depositing a copy of headers and 133# libraries corresponding to the protolibs target 134# 135PARENT_ROOT=$PARENT_WS/proto/root_$MACH; export PARENT_ROOT 136 137# 138# package creation variable. This put the packages in the parent. 139# 140PKGARCHIVE="${PARENT_WS}/packages/${MACH}/nightly"; export PKGARCHIVE 141 142# we want make to do as much as it can, just in case there's more than 143# one problem. This is especially important with the gate, since multiple 144# unrelated broken things can be integrated. 145MAKEFLAGS=k; export MAKEFLAGS 146 147# Magic variable to prevent the devpro compilers/teamware from sending 148# mail back to devpro on every use. 149UT_NO_USAGE_TRACKING="1"; export UT_NO_USAGE_TRACKING 150 151# Build tools - don't set these unless you know what you're doing. These 152# variables allows you to get the compilers and onbld files locally or 153# through cachefs. Set BUILD_TOOLS to pull everything from one location. 154# Alternately, you can set ONBLD_TOOLS to where you keep the contents of 155# SUNWonbld and SPRO_ROOT to where you keep the compilers. 156# 157#BUILD_TOOLS=/opt; export BUILD_TOOLS 158#ONBLD_TOOLS=/opt/onbld; export ONBLD_TOOLS 159#SPRO_ROOT=/opt/SUNspro; export SPRO_ROOT 160 161# This goes along with lint - it is a series of the form "A [y|n]" which 162# means "go to directory A and run 'make lint'" Then mail me (y) the 163# difference in the lint output. 'y' should only be used if the area you're 164# linting is actually lint clean or you'll get lots of mail. 165# You shouldn't need to change this though. 166#LINTDIRS="$SRC y"; export LINTDIRS 167 168# 169# NT server for realmode builds 170# 171#NTSERVER=<hostname>; export NTSERVER 172 173# 174# Reference to IA32 IHV workspace, proto area and packages 175# 176#IA32_IHV_WS=/ws/${GATE}-ihv; export IA32_IHV_WS 177#IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386; export IA32_IHV_ROOT 178#IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly; export IA32_IHV_PKGS 179 180# 181# Reference to binary-only IA32 IHV packages (for boot floppy construction) 182# 183#IA32_IHV_BINARY_PKGS=/ws/${GATE}_ihv_bin 184#export IA32_IHV_BINARY_PKGS 185 186# 187# Boot floppy proto area 188# 189#DCB_ROOT="${CODEMGR_WS}/proto/root_dcb_${MACH}" 190#BOOTFLOPPY_ROOT="${CODEMGR_WS}/proto/root_BootFloppy_${MACH}" 191#export DCB_ROOT 192#export BOOTFLOPPY_ROOT 193 194# 195# Destination for sparc realmode package SUNWrmodu 196# 197#SPARC_RM_PKGARCHIVE="${CODEMGR_WS}/packages/sparc_realmode/nightly" 198#export SPARC_RM_PKGARCHIVE 199 200# REF_PROTO_LIST_DCB & REF_PROTO_LIST_BOOTFLOPPY 201# To compare the list of stuff in your DCB and BootFloppy proto areas 202# against. Generally this should be left alone, since you want to see 203# differences between todays build and yesterdays. 204# 205#REF_PROTO_LIST_DCB=$PARENT_WS/usr/src/realmode/proto_list_dcb_${MACH} 206#REF_PROTO_LIST_BOOTFLOPPY=$PARENT_WS/usr/src/realmode/proto_list_bootfloppy_${MACH} 207#export REF_PROTO_LIST_DCB 208#export REF_PROTO_LIST_BOOTFLOPPY 209 210# Set this flag to 'n' to disable the automatic validation of the dmake 211# version in use. The default is to check it. 212#CHECK_DMAKE=y 213 214# Set this flag to 'n' to disable the use of 'checkpaths'. The default, 215# if the 'N' option is not specified, is to run this test. 216#CHECK_PATHS=y 217 218# Set this flag to 'y' to enable the use of elfsigncmp to validate the 219# output of elfsign. Doing so requires that 't' be set in NIGHTLY_OPTIONS. 220# The default is to not verify them. 221#VERIFY_ELFSIGN=n 222 223# BRINGOVER_FILES is the list of files nightly passes to bringover. 224# If not set the default is "usr", but it can be used for bringing 225# over deleted_files or other nifty directories. 226#BRINGOVER_FILES="usr deleted_files" 227