1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License, Version 1.0 only 6# (the "License"). You may not use this file except in compliance 7# with the License. 8# 9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10# or http://www.opensolaris.org/os/licensing. 11# See the License for the specific language governing permissions 12# and limitations under the License. 13# 14# When distributing Covered Code, include this CDDL HEADER in each 15# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16# If applicable, add the following below this CDDL HEADER, with the 17# fields enclosed by brackets "[]" replaced with your own identifying 18# information: Portions Copyright [yyyy] [name of copyright owner] 19# 20# CDDL HEADER END 21# 22# 23#ident "%Z%%M% %I% %E% SMI" 24# 25# Copyright 2005 Sun Microsystems, Inc. All rights reserved. 26# Use is subject to license terms. 27# 28# Configuration variables for the runtime environment of the nightly 29# build script and other tools for construction and packaging of releases. 30# This script is sourced by 'nightly' and 'bldenv' to set up the environment 31# for the build. This example is suitable for building a developers workspace, 32# which will contain the resulting packages and archives. It is based off 33# the onnv release. It sets NIGHTLY_OPTIONS to make nightly do: 34# creates cpio archives for bfu (-a) 35# runs 'make check' (-C) 36# DEBUG and non-DEBUG builds (-D) 37# runs lint in usr/src (-l plus the LINTDIRS variable) 38# sends mail on completion (-m and the MAILTO variable) 39# creates packages for PIT/RE (-p) 40# checks for changes in ELF runpaths (-r) 41# use dmake instead of pmake (-d) 42# 43NIGHTLY_OPTIONS="-aCDlmprd"; export NIGHTLY_OPTIONS 44 45# This is a variable for the rest of the script - GATE doesn't matter to 46# nightly itself 47GATE=onnv-bugfixes; export GATE 48 49# CODEMGR_WS - where is your workspace at (or what should nightly name it) 50CODEMGR_WS="/builds/$GATE"; export CODEMGR_WS 51 52# PARENT_WS is used to determine the parent of this workspace. This is 53# for the options that deal with the parent workspace (such as where the 54# proto area will go). 55PARENT_WS="/ws/onnv-gate"; export PARENT_WS 56 57# CLONE_WS is the workspace nightly should do a bringover from. Since it's 58# going to bringover usr/src, this could take a while, so we use the 59# clone instead of the gate (see the gate's README). 60CLONE_WS="/ws/onnv-clone"; export CLONE_WS 61 62# The bringover, if any, is done as STAFFER. 63# Set STAFFER to your own login as gatekeeper or developer 64# The point is to use group "staff" and avoid referencing the parent 65# workspace as root. 66# Some scripts optionally send mail messages to MAILTO. 67# 68STAFFER=nobody; export STAFFER 69MAILTO=$STAFFER; export MAILTO 70 71# The project (see project(4)) under which to run this build. If not 72# specified, the build is simply run in a new task in the current project. 73BUILD_PROJECT=; export BUILD_PROJECT 74 75# You should not need to change the next four lines 76LOCKNAME="`basename $CODEMGR_WS`_nightly.lock"; export LOCKNAME 77ATLOG="$CODEMGR_WS/log"; export ATLOG 78LOGFILE="$ATLOG/nightly.log"; export LOGFILE 79MACH=`uname -p`; export MACH 80 81# REF_PROTO_LIST - for comparing the list of stuff in your proto area 82# with. Generally this should be left alone, since you want to see differences 83# from your parent (the gate). 84# 85REF_PROTO_LIST=$PARENT_WS/usr/src/proto_list_${MACH}; export REF_PROTO_LIST 86 87# where cpio archives of the OS are placed. Usually this should be left 88# alone too. 89CPIODIR="${CODEMGR_WS}/archives/${MACH}/nightly"; export CPIODIR 90 91# 92# build environment variables, including version info for mcs, motd, 93# motd, uname and boot messages. Mostly you shouldn't change this except 94# when the release slips (nah) or you move an environment file to a new 95# release 96# 97ROOT="$CODEMGR_WS/proto/root_${MACH}"; export ROOT 98SRC="$CODEMGR_WS/usr/src"; export SRC 99VERSION="$GATE"; export VERSION 100 101# the source product has no SCCS history, and is modified to remove source 102# that cannot be shipped. EXPORT_SRC is where the clear files are copied, then 103# modified with 'make EXPORT_SRC'. 104EXPORT_SRC="$CODEMGR_WS/export_src"; export EXPORT_SRC 105 106# CRYPT_SRC is similar to EXPORT_SRC, but after 'make CRYPT_SRC' the files in 107# xmod/cry_files are saved. They are dropped on the exportable source to create 108# the domestic build. 109CRYPT_SRC="$CODEMGR_WS/crypt_src"; export CRYPT_SRC 110 111# 112# the RELEASE and RELEASE_DATE variables are set in Makefile.master; 113# there might be special reasons to override them here, but that 114# should not be the case in general 115# 116# RELEASE="5.10.1"; export RELEASE 117# RELEASE_DATE="October 2007"; export RELEASE_DATE 118 119# proto area in parent for optionally depositing a copy of headers and 120# libraries corresponding to the protolibs target 121# not applicable given the NIGHTLY_OPTIONS 122# 123PARENT_ROOT=$PARENT_WS/proto/root_$MACH; export PARENT_ROOT 124 125# 126# package creation variable. you probably shouldn't change this either. 127# 128PKGARCHIVE="${CODEMGR_WS}/packages/${MACH}/nightly"; export PKGARCHIVE 129 130# we want make to do as much as it can, just in case there's more than 131# one problem. 132MAKEFLAGS=k; export MAKEFLAGS 133 134# Magic variable to prevent the devpro compilers/teamware from sending 135# mail back to devpro on every use. 136UT_NO_USAGE_TRACKING="1"; export UT_NO_USAGE_TRACKING 137 138# Build tools - don't set these unless you know what you're doing. These 139# variables allows you to get the compilers and onbld files locally or 140# through cachefs. Set BUILD_TOOLS to pull everything from one location. 141# Alternately, you can set ONBLD_TOOLS to where you keep the contents of 142# SUNWonbld and SPRO_ROOT to where you keep the compilers. 143# 144#BUILD_TOOLS=/opt; export BUILD_TOOLS 145#ONBLD_TOOLS=/opt/onbld; export ONBLD_TOOLS 146#SPRO_ROOT=/opt/SUNspro; export SPRO_ROOT 147 148# This goes along with lint - it is a series of the form "A [y|n]" which 149# means "go to directory A and run 'make lint'" Then mail me (y) the 150# difference in the lint output. 'y' should only be used if the area you're 151# linting is actually lint clean or you'll get lots of mail. 152# You shouldn't need to change this though. 153#LINTDIRS="$SRC y"; export LINTDIRS 154 155# 156# NT server for realmode builds 157# 158#NTSERVER=<hostname>; export NTSERVER 159 160# 161# Reference to IA32 IHV workspace, proto area and packages 162# 163#IA32_IHV_WS=/ws/${GATE}-ihv; export IA32_IHV_WS 164#IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386; export IA32_IHV_ROOT 165#IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly; export IA32_IHV_PKGS 166 167# 168# Reference to binary-only IA32 IHV packages (for boot floppy construction) 169# 170#IA32_IHV_BINARY_PKGS=/ws/${GATE}_ihv_bin 171#export IA32_IHV_BINARY_PKGS 172 173# 174# Boot floppy proto area 175# 176#DCB_ROOT="${CODEMGR_WS}/proto/root_dcb_${MACH}" 177#BOOTFLOPPY_ROOT="${CODEMGR_WS}/proto/root_BootFloppy_${MACH}" 178#export DCB_ROOT 179#export BOOTFLOPPY_ROOT 180 181# 182# Destination for sparc realmode package SUNWrmodu 183# 184#SPARC_RM_PKGARCHIVE="${CODEMGR_WS}/packages/sparc_realmode/nightly" 185#export SPARC_RM_PKGARCHIVE 186 187# REF_PROTO_LIST_DCB & REF_PROTO_LIST_BOOTFLOPPY 188# To compare the list of stuff in your DCB and BootFloppy proto areas 189# against. Generally this should be left alone, since you want to see 190# differences from your parent (the gate). 191# 192#REF_PROTO_LIST_DCB=$PARENT_WS/usr/src/realmode/proto_list_dcb_${MACH} 193#REF_PROTO_LIST_BOOTFLOPPY=$PARENT_WS/usr/src/realmode/proto_list_bootfloppy_${MACH} 194#export REF_PROTO_LIST_DCB 195#export REF_PROTO_LIST_BOOTFLOPPY 196 197# Set this flag to 'n' to disable the automatic validation of the dmake 198# version in use. The default is to check it. 199#CHECK_DMAKE=y 200 201# Set this flag to 'n' to disable the use of 'checkpaths'. The default, 202# if the 'N' option is not specified, is to run this test. 203#CHECK_PATHS=y 204 205# Set this flag to 'y' to enable the use of elfsigncmp to validate the 206# output of elfsign. Doing so requires that 't' be set in NIGHTLY_OPTIONS. 207# The default is to not verify them. 208#VERIFY_ELFSIGN=n 209 210# BRINGOVER_FILES is the list of files nightly passes to bringover. 211# If not set the default is "usr/src", but it can be used for bringing 212# over deleted_files or other nifty directories. 213#BRINGOVER_FILES="usr/src deleted_files" 214