1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# 22#ident "%Z%%M% %I% %E% SMI" 23# 24# Copyright 2006 Sun Microsystems, Inc. All rights reserved. 25# Use is subject to license terms. 26# 27# Configuration variables for the runtime environment of the nightly 28# build script and other tools for construction and packaging of releases. 29# This script is sourced by 'nightly' and 'bldenv' to set up the environment 30# for the build. This example is suitable for building a developers workspace, 31# which will contain the resulting packages and archives. It is based off 32# the onnv release. It sets NIGHTLY_OPTIONS to make nightly do: 33# creates cpio archives for bfu (-a) 34# runs 'make check' (-C) 35# DEBUG and non-DEBUG builds (-D) 36# runs lint in usr/src (-l plus the LINTDIRS variable) 37# sends mail on completion (-m and the MAILTO variable) 38# creates packages for PIT/RE (-p) 39# checks for changes in ELF runpaths (-r) 40# 41NIGHTLY_OPTIONS="-aCDlmpr"; export NIGHTLY_OPTIONS 42 43# This is a variable for the rest of the script - GATE doesn't matter to 44# nightly itself 45GATE=onnv-bugfixes; export GATE 46 47# CODEMGR_WS - where is your workspace at (or what should nightly name it) 48CODEMGR_WS="/builds/$GATE"; export CODEMGR_WS 49 50# PARENT_WS is used to determine the parent of this workspace. This is 51# for the options that deal with the parent workspace (such as where the 52# proto area will go). 53PARENT_WS="/ws/onnv-gate"; export PARENT_WS 54 55# CLONE_WS is the workspace nightly should do a bringover from. Since it's 56# going to bringover usr/src, this could take a while, so we use the 57# clone instead of the gate (see the gate's README). 58CLONE_WS="/ws/onnv-clone"; export CLONE_WS 59 60# This flag controls whether to build the closed source. If 61# undefined, nightly(1) and bldenv(1) will set it according to whether 62# the closed tree is present. 63# CLOSED_IS_PRESENT="yes"; export CLOSED_IS_PRESENT 64 65# The bringover, if any, is done as STAFFER. 66# Set STAFFER to your own login as gatekeeper or developer 67# The point is to use group "staff" and avoid referencing the parent 68# workspace as root. 69# Some scripts optionally send mail messages to MAILTO. 70# 71STAFFER=nobody; export STAFFER 72MAILTO=$STAFFER; export MAILTO 73 74# The project (see project(4)) under which to run this build. If not 75# specified, the build is simply run in a new task in the current project. 76BUILD_PROJECT=; export BUILD_PROJECT 77 78# You should not need to change the next four lines 79LOCKNAME="`basename $CODEMGR_WS`_nightly.lock"; export LOCKNAME 80ATLOG="$CODEMGR_WS/log"; export ATLOG 81LOGFILE="$ATLOG/nightly.log"; export LOGFILE 82MACH=`uname -p`; export MACH 83 84# REF_PROTO_LIST - for comparing the list of stuff in your proto area 85# with. Generally this should be left alone, since you want to see differences 86# from your parent (the gate). 87# 88REF_PROTO_LIST=$PARENT_WS/usr/src/proto_list_${MACH}; export REF_PROTO_LIST 89 90# where cpio archives of the OS are placed. Usually this should be left 91# alone too. 92CPIODIR="${CODEMGR_WS}/archives/${MACH}/nightly"; export CPIODIR 93 94# 95# build environment variables, including version info for mcs, motd, 96# motd, uname and boot messages. Mostly you shouldn't change this except 97# when the release slips (nah) or you move an environment file to a new 98# release 99# 100ROOT="$CODEMGR_WS/proto/root_${MACH}"; export ROOT 101SRC="$CODEMGR_WS/usr/src"; export SRC 102VERSION="$GATE"; export VERSION 103 104# the source product has no SCCS history, and is modified to remove source 105# that cannot be shipped. EXPORT_SRC is where the clear files are copied, then 106# modified with 'make EXPORT_SRC'. 107EXPORT_SRC="$CODEMGR_WS/export_src"; export EXPORT_SRC 108 109# CRYPT_SRC is similar to EXPORT_SRC, but after 'make CRYPT_SRC' the files in 110# xmod/cry_files are saved. They are dropped on the exportable source to create 111# the domestic build. 112CRYPT_SRC="$CODEMGR_WS/crypt_src"; export CRYPT_SRC 113 114# 115# the RELEASE and RELEASE_DATE variables are set in Makefile.master; 116# there might be special reasons to override them here, but that 117# should not be the case in general 118# 119# RELEASE="5.10.1"; export RELEASE 120# RELEASE_DATE="October 2007"; export RELEASE_DATE 121 122# proto area in parent for optionally depositing a copy of headers and 123# libraries corresponding to the protolibs target 124# not applicable given the NIGHTLY_OPTIONS 125# 126PARENT_ROOT=$PARENT_WS/proto/root_$MACH; export PARENT_ROOT 127 128# 129# package creation variable. you probably shouldn't change this either. 130# 131PKGARCHIVE="${CODEMGR_WS}/packages/${MACH}/nightly"; export PKGARCHIVE 132 133# we want make to do as much as it can, just in case there's more than 134# one problem. 135MAKEFLAGS=k; export MAKEFLAGS 136 137# Magic variable to prevent the devpro compilers/teamware from sending 138# mail back to devpro on every use. 139UT_NO_USAGE_TRACKING="1"; export UT_NO_USAGE_TRACKING 140 141# Build tools - don't set these unless you know what you're doing. These 142# variables allows you to get the compilers and onbld files locally or 143# through cachefs. Set BUILD_TOOLS to pull everything from one location. 144# Alternately, you can set ONBLD_TOOLS to where you keep the contents of 145# SUNWonbld and SPRO_ROOT to where you keep the compilers. 146# 147#BUILD_TOOLS=/opt; export BUILD_TOOLS 148#ONBLD_TOOLS=/opt/onbld; export ONBLD_TOOLS 149#SPRO_ROOT=/opt/SUNspro; export SPRO_ROOT 150 151# This goes along with lint - it is a series of the form "A [y|n]" which 152# means "go to directory A and run 'make lint'" Then mail me (y) the 153# difference in the lint output. 'y' should only be used if the area you're 154# linting is actually lint clean or you'll get lots of mail. 155# You shouldn't need to change this though. 156#LINTDIRS="$SRC y"; export LINTDIRS 157 158# 159# NT server for realmode builds 160# 161#NTSERVER=<hostname>; export NTSERVER 162 163# 164# Reference to IA32 IHV workspace, proto area and packages 165# 166#IA32_IHV_WS=/ws/${GATE}-ihv; export IA32_IHV_WS 167#IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386; export IA32_IHV_ROOT 168#IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly; export IA32_IHV_PKGS 169 170# 171# Reference to binary-only IA32 IHV packages (for boot floppy construction) 172# 173#IA32_IHV_BINARY_PKGS=/ws/${GATE}_ihv_bin 174#export IA32_IHV_BINARY_PKGS 175 176# 177# Boot floppy proto area 178# 179#DCB_ROOT="${CODEMGR_WS}/proto/root_dcb_${MACH}" 180#BOOTFLOPPY_ROOT="${CODEMGR_WS}/proto/root_BootFloppy_${MACH}" 181#export DCB_ROOT 182#export BOOTFLOPPY_ROOT 183 184# 185# Destination for sparc realmode package SUNWrmodu 186# 187#SPARC_RM_PKGARCHIVE="${CODEMGR_WS}/packages/sparc_realmode/nightly" 188#export SPARC_RM_PKGARCHIVE 189 190# REF_PROTO_LIST_DCB & REF_PROTO_LIST_BOOTFLOPPY 191# To compare the list of stuff in your DCB and BootFloppy proto areas 192# against. Generally this should be left alone, since you want to see 193# differences from your parent (the gate). 194# 195#REF_PROTO_LIST_DCB=$PARENT_WS/usr/src/realmode/proto_list_dcb_${MACH} 196#REF_PROTO_LIST_BOOTFLOPPY=$PARENT_WS/usr/src/realmode/proto_list_bootfloppy_${MACH} 197#export REF_PROTO_LIST_DCB 198#export REF_PROTO_LIST_BOOTFLOPPY 199 200# Set this flag to 'n' to disable the automatic validation of the dmake 201# version in use. The default is to check it. 202#CHECK_DMAKE=y 203 204# Set this flag to 'n' to disable the use of 'checkpaths'. The default, 205# if the 'N' option is not specified, is to run this test. 206#CHECK_PATHS=y 207 208# Set this flag to 'y' to enable the use of elfsigncmp to validate the 209# output of elfsign. Doing so requires that 't' be set in NIGHTLY_OPTIONS. 210# The default is to not verify them. 211#VERIFY_ELFSIGN=n 212 213# BRINGOVER_FILES is the list of files nightly passes to bringover. 214# If not set the default is "usr", but it can be used for bringing 215# over deleted_files or other nifty directories. 216#BRINGOVER_FILES="usr deleted_files" 217 218# POST_NIGHTLY can be any command to be run at the end of nightly. See 219# nightly(1) for interactions between environment variables and this command. 220#POST_NIGHTLY= 221