1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21 22# 23# Copyright (c) 1999, 2010, Oracle and/or its affiliates. All rights reserved. 24# 25 26# Configuration variables for the runtime environment of the nightly 27# build script and other tools for construction and packaging of releases. 28# This script is sourced by 'nightly' and 'bldenv' to set up the environment 29# for the build. This example is suitable for building a developers workspace, 30# which will contain the resulting packages and archives. It is based off 31# the onnv release. It sets NIGHTLY_OPTIONS to make nightly do: 32# check ELF ABI/versioning (-A) 33# runs 'make check' (-C) 34# DEBUG and non-DEBUG builds (-D) 35# runs lint in usr/src (-l plus the LINTDIRS variable) 36# sends mail on completion (-m and the MAILTO variable) 37# creates packages for PIT/RE (-p) 38# checks for changes in ELF runpaths (-r) 39# 40NIGHTLY_OPTIONS="-ACDlmpr"; export NIGHTLY_OPTIONS 41 42# This is a variable for the rest of the script - GATE doesn't matter to 43# nightly itself 44GATE=onnv-bugfixes; export GATE 45 46# CODEMGR_WS - where is your workspace at (or what should nightly name it) 47CODEMGR_WS="/builds/$GATE"; export CODEMGR_WS 48 49# PARENT_WS is used to determine the parent of this workspace. This is 50# for the options that deal with the parent workspace (such as where the 51# proto area will go). 52# 53# If you use this, it must be local (or nfs): nightly cannot copy 54# over ssh or http. 55PARENT_WS="/ws/onnv-gate"; export PARENT_WS 56 57# CLONE_WS is the workspace nightly should do a bringover from. 58CLONE_WS="ssh://anonhg@onnv.sfbay.sun.com//export/onnv-clone"; export CLONE_WS 59 60# CLOSED_CLONE_WS is the workspace from which nightly should acquire 61# the usr/closed tree. 62CLOSED_CLONE_WS="${CLONE_WS}/usr/closed"; export CLOSED_CLONE_WS 63 64# This flag controls whether to build the closed source. If 65# undefined, nightly(1) and bldenv(1) will set it according to whether 66# the closed source tree is present. CLOSED_IS_PRESENT="no" means not 67# building the closed sources. 68# CLOSED_IS_PRESENT="yes"; export CLOSED_IS_PRESENT 69 70# The bringover, if any, is done as STAFFER. 71# Set STAFFER to your own login as gatekeeper or developer 72# The point is to use group "staff" and avoid referencing the parent 73# workspace as root. 74# Some scripts optionally send mail messages to MAILTO. 75# 76STAFFER=nobody; export STAFFER 77MAILTO=$STAFFER; export MAILTO 78 79# The project (see project(4)) under which to run this build. If not 80# specified, the build is simply run in a new task in the current project. 81BUILD_PROJECT=; export BUILD_PROJECT 82 83# You should not need to change the next four lines 84LOCKNAME="`basename $CODEMGR_WS`_nightly.lock"; export LOCKNAME 85ATLOG="$CODEMGR_WS/log"; export ATLOG 86LOGFILE="$ATLOG/nightly.log"; export LOGFILE 87MACH=`uname -p`; export MACH 88 89# When the -A flag is specified, and ELF_DATA_BASELINE_DIR is defined, 90# the ELF interface description file resulting from the build is compared 91# to that from the specified directory. This ensures that our object 92# versioning evolves in a backward compatible manner. 93# 94# You should not need to change this unless you wish to use locally cached 95# baseline files. If you use this, it must be local (or nfs): nightly cannot 96# copy over ssh or http. 97# 98ELF_DATA_BASELINE_DIR="/ws/onnv-gate/usr/src/ELF-data-baseline.$MACH"; export ELF_DATA_BASELINE_DIR 99 100# This is usually just needed if the closed tree is missing, or when 101# building a project gate with the -O (cap oh) flag. 102# ON_CRYPTO_BINS="$PARENT_WS/packages/$MACH/on-crypto.$MACH.tar.bz2" 103# export ON_CRYPTO_BINS 104 105# REF_PROTO_LIST - for comparing the list of stuff in your proto area 106# with. Generally this should be left alone, since you want to see differences 107# from your parent (the gate). 108# 109REF_PROTO_LIST=$PARENT_WS/usr/src/proto_list_${MACH}; export REF_PROTO_LIST 110 111# 112# build environment variables, including version info for mcs, motd, 113# motd, uname and boot messages. Mostly you shouldn't change this except 114# when the release slips (nah) or you move an environment file to a new 115# release 116# 117ROOT="$CODEMGR_WS/proto/root_${MACH}"; export ROOT 118SRC="$CODEMGR_WS/usr/src"; export SRC 119VERSION="$GATE"; export VERSION 120 121# 122# the RELEASE and RELEASE_DATE variables are set in Makefile.master; 123# there might be special reasons to override them here, but that 124# should not be the case in general 125# 126# RELEASE="5.10.1"; export RELEASE 127# RELEASE_DATE="October 2007"; export RELEASE_DATE 128 129# proto area in parent for optionally depositing a copy of headers and 130# libraries corresponding to the protolibs target 131# not applicable given the NIGHTLY_OPTIONS 132# 133PARENT_ROOT=$PARENT_WS/proto/root_$MACH; export PARENT_ROOT 134PARENT_TOOLS_ROOT=$PARENT_WS/usr/src/tools/proto/root_$MACH-nd; export PARENT_TOOLS_ROOT 135 136# 137# Package creation variables. You probably shouldn't change these, 138# either. 139# 140# PKGARCHIVE determines where repositories will be created. 141# 142# PKGPUBLISHER* control the publisher settings for those repositories. 143# 144PKGARCHIVE="${CODEMGR_WS}/packages/${MACH}/nightly"; export PKGARCHIVE 145# PKGPUBLISHER_REDIST="on-redist"; export PKGPUBLISHER_REDIST 146# PKGPUBLISHER_NONREDIST="on-extra"; export PKGPUBLISHER_NONREDIST 147 148# we want make to do as much as it can, just in case there's more than 149# one problem. 150MAKEFLAGS=k; export MAKEFLAGS 151 152# Magic variable to prevent the devpro compilers/teamware from sending 153# mail back to devpro on every use. 154UT_NO_USAGE_TRACKING="1"; export UT_NO_USAGE_TRACKING 155 156# Build tools - don't set these unless you know what you're doing. These 157# variables allows you to get the compilers and onbld files locally or 158# through cachefs. Set BUILD_TOOLS to pull everything from one location. 159# Alternately, you can set ONBLD_TOOLS to where you keep the contents of 160# SUNWonbld and SPRO_ROOT to where you keep the compilers. 161# 162#BUILD_TOOLS=/opt; export BUILD_TOOLS 163#ONBLD_TOOLS=/opt/onbld; export ONBLD_TOOLS 164#SPRO_ROOT=/opt/SUNWspro; export SPRO_ROOT 165 166# This goes along with lint - it is a series of the form "A [y|n]" which 167# means "go to directory A and run 'make lint'" Then mail me (y) the 168# difference in the lint output. 'y' should only be used if the area you're 169# linting is actually lint clean or you'll get lots of mail. 170# You shouldn't need to change this though. 171#LINTDIRS="$SRC y"; export LINTDIRS 172 173# 174# Reference to IA32 IHV workspace, proto area and packages 175# 176#IA32_IHV_WS=/ws/${GATE}-ihv; export IA32_IHV_WS 177#IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386; export IA32_IHV_ROOT 178#IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly; export IA32_IHV_PKGS 179 180# 181# Reference to binary-only IA32 IHV packages 182# 183#IA32_IHV_BINARY_PKGS=/ws/${GATE}-ihv-bin 184#export IA32_IHV_BINARY_PKGS 185 186# Set this flag to 'n' to disable the automatic validation of the dmake 187# version in use. The default is to check it. 188#CHECK_DMAKE=y 189 190# Set this flag to 'n' to disable the use of 'checkpaths'. The default, 191# if the 'N' option is not specified, is to run this test. 192#CHECK_PATHS=y 193 194# Set this flag to 'y' to enable the use of elfsigncmp to validate the 195# output of elfsign. Doing so requires that 't' be set in NIGHTLY_OPTIONS. 196# The default is to not verify them. 197#VERIFY_ELFSIGN=n 198 199# BRINGOVER_FILES is the list of files nightly passes to bringover. 200# If not set the default is "usr", but it can be used for bringing 201# over deleted_files or other nifty directories. 202#BRINGOVER_FILES="usr deleted_files" 203 204# POST_NIGHTLY can be any command to be run at the end of nightly. See 205# nightly(1) for interactions between environment variables and this command. 206#POST_NIGHTLY= 207