1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# 22# Copyright 2007 Sun Microsystems, Inc. All rights reserved. 23# Use is subject to license terms. 24# 25#ident "%Z%%M% %I% %E% SMI" 26 27This directory contains the tools used to do a full build of the 28OS/Net workspace. They usually live in the /opt/onbld directory on build 29machines. From here, 'make install' will build and install the tools 30in $ROOT/opt/onbld. If you like, 'make pkg' will build the SUNWonbld 31package in $(PKGARCHIVE). Installing that package will populate the 32/opt/onbld directory, and create a root account for building called 'gk', 33which uses csh and has a home directory of /opt/onbld/gk. You can 34use this account to do full builds with 'nightly'. You don't have to, 35but the 'gk' account has the path setup properly, has a .make.machines 36file for dmake, and has a .login that sets up for dmake. 37 38Layout of /opt/onbld 39-------------------- 40 41/opt/onbld/etc/abi 42 contains Solaris ABI database (ABI_*.db) and exceptions 43 for ABI Auditing tool (intf_check). 44 45/opt/onbld/gk 46 gk account's home directory. 47 48/opt/onbld/bin 49 basic bin directory - contains scripts. 50 51/opt/onbld/bin/${MACH} 52 architecture-specific bin directory for binaries. 53 54/opt/onbld/env 55 build environment files. 56 57/opt/onbld/man 58 rudimentary man pages for some of the tools. 59 60 61Tool Summary 62------------ 63 64bfu 65 bonwick/faulkner upgrade. Loads a set of cpio archives created 66 by 'mkbfu' onto a machine, either live or on alternate root 67 and /usr filesystems. Attempts to preserve important files, 68 but may require manual intervention before reboot to resolve 69 changes to preserved files. 70 71bfuld 72 Used by bfu to survive getting a new runtime linker when extracting 73 new cpio archives onto a live system. Patches binaries to use 74 a saved runtime linker in /tmp during the bfu process. 75 Not run by anything but bfu. 76 77bldenv 78 companion to 'nightly.' Takes the same environment file you 79 used with 'nightly,' and starts a shell with the environment 80 set up the same way as 'nightly' set it up. This is useful 81 if you're trying to quickly rebuild portions of a workspace 82 built by 'nightly'. 'ws' should not be used for this since it 83 sets the environment up differently and may cause everything 84 to rebuild (because of different -I or -L paths). 85 86build_cscope 87 builds cscope databases in the uts, the platform subdirectories 88 of uts, and in usr/src. Uses cscope-fast. 89 90check_rtime 91 checks ELF attributes used by ELF dynamic objects in the proto area. 92 Used by 'nightly's -r option, to check a number of ELF runtime 93 attributes for consistency with common build rules. nightly uses 94 the -o option to simplify the output for diffing with previous 95 build results. It also uses the -i option to obtain NEEDED and RUNPATH 96 entries, which help detect changes in software dependencies and makes 97 sure objects don't have any strange runpaths like /opt/SUNWspro/lib. 98 99checkproto 100 Runs protocmp and protolist on a workspace (or uses the environment 101 variable CODEMGR_WS to determine the workspace). Checks the proto area 102 against the packages. 103 104codereview 105 Given two filenames, creates a postscript file with the file 106 differences highlighted. 107 108codesign 109 Tools for signing cryptographic modules using the official 110 Sun release keys stored on a remote signing server. This 111 directory contains signit, a client program for signing 112 files with the signing server; signproto, a shell script 113 that finds crypto modules in $ROOT and signs them using 114 signit; and codesign_server.pl, the code that runs on the 115 server. The codesign_server code is not used on an ON 116 build machine but is kept here for source control purposes. 117 118cscope-fast 119 The fast version of cscope that we use internally. Seems to work, 120 but may need more testing before it's placed in the gate. The source 121 just really needs to be here. 122 123cstyle 124 checks C source for compliance with OS/Net guidelines. 125 126ctfconvert 127 Convert symbolic debugging information in an object file to the Compact 128 ANSI-C Type Format (CTF). 129 130ctfdump 131 Decode and display CTF data stored in a raw file or in an ELF file. 132 133ctfmerge 134 Merge the CTF data from one or more object files. 135 136depcheck 137 A tool to try an assess the dependencies of executables. This tool 138 is not a definitive dependency check, but it does use "strings" and 139 "ldd" to gather as much information as it can. The dependency check 140 tool can handle filenames and pkgnames. Before using the dependency 141 checker you must build a database which reflects the properties and 142 files in your system. 143 144elfcmp 145 Compares two ELF modules (e.g. .o files, executables) section by 146 section. Useful for determining whether "trivial" changes - 147 cstyle, lint, etc - actually changed the code. The -S option 148 is used to test whether two binaries are the same except for 149 the elfsign signature. 150 151elfsign 152 Built from the same sources as the shipped elfsign(1), this 153 version is used in nightly -t builds to assure that the signing 154 process and format is the same as will be used on the target 155 system. 156 157elfsigncmp 158 This script can be used in lieu of elfsign during a build. 159 It uses elfsign to sign a copy of the object and elfcmp -S to 160 verify that the signing caused no damage before updating 161 the object to be signed. 162 163findunref 164 Finds all files in a source tree that have access times older than a 165 certain time and are not in a specified list of exceptions. Since 166 'nightly' timestamps the start of the build, and findunref uses its 167 timestamp (by default), this can be used to find all files that were 168 unreferenced during a nightly build). Since some files are only used 169 during a SPARC or Intel build, 'findunref' needs to be run on 170 workspaces from both architectures and the results need to be merged. 171 For instance, if $INTELSRC and $SPARCSRC are set to the usr/src 172 directories of your Intel and SPARC nightly workspaces, then you 173 can merge the results like so: 174 175 $ findunref $INTELSRC $INTELSRC/tools/findunref/exception_list | \ 176 sort > ~/unref-i386.out 177 $ findunref $SPARCSRC $SPARCSRC/tools/findunref/exception_list | \ 178 sort > ~/unref-sparc.out 179 $ comm -12 ~/unref-i386.out ~/unref-sparc.out > ~/unref.out 180 181hdrchk 182 checks headers for compliance with OS/Net standards (form, includes, 183 C++ guards). 184 185install.bin 186 binary version of /usr/sbin/install. Used to be vastly faster 187 (since /usr/sbin/install is a shell script), but may only be a bit 188 faster now. One speedup includes avoiding the name service for the 189 well-known, never-changing password entries like 'root' and 'sys.' 190 191intf_check 192 detects and reports ABI versioning and stability problems. 193 194lintdump 195 dumps the contents of one or more lint libraries; see lintdump(1) 196 197keywords 198 checks files for proper SCCS keywords. 199 200makebfu 201 simple wrapper around 'mkbfu' for use outside nightly (when in a build 202 shell from 'ws' or 'bldenv'). 203 204mkbfu 205 makes cpio archives out of the proto area suitable for bfu'ing. 206 Used by 'nightly' and 'makebfu'. 207 208ndrgen 209 Network Data Language (NDL) RPC protocol compiler to support DCE 210 RPC/MSRPC and SMB/CIFS. ndrgen takes an input protocol definition 211 file (say, proto.ndl) and generates an output C source file 212 (proto_ndr.c) containing the Network Data Representation (NDR) 213 marshalling routines to implement the RPC protocol. 214 215nightly 216 nightly build script. Takes an environment (or 'env') file describing 217 such things as the workspace, the parent, and what to build. See 218 env/developer and env/gatekeeper for sample, hopefully well-commented 219 env files. 220 221pmodes 222 enforces proper file ownership and permissions in pkgmap and package 223 prototype* files. converts files if necessary 224 225protocmp 226 compares proto lists and the package definitions. Used by nightly 227 to determine if the proto area matches the packages, and to detect 228 differences between a childs proto area and a parents. 229 230protocmp.terse 231 transforms the output of protocmp into something a bit more friendly 232 233protolist 234 create a list of what's in the proto area, to feed to protocmp. 235 236sccscp 237 copy a file under SCCS control to another location in a workspace. 238 also updates teamware's nametable. 239 240sccshist 241 Display the history, comments and diffs, of a file under SCCS 242 control. 243 244sccsmv 245 rename a file under SCCS control to another location in a workspace. 246 also updates teamware's nametable. 247 248sccsrm 249 delete a file under SCCS control workspace. also updates teamware's 250 nametable. Actually renames it to .del-<file>-`date` so that others 251 will see it move when it is brought over (in case they were working 252 on it). 253 254ws 255 creates a shell with the environment set up to build in the given 256 workspace. Used mostly for non-full-build workspaces, so it sets up 257 to pull headers and libraries from the proto area of the parent if 258 they aren't in the childs proto area. 259 260wx 261 A great workspace tool by bonwick. See wx.README for information 262 and warnings. 263 264tokenize 265 Used to build the sun4u boot block. 266 267webrev 268 Generates a set of HTML pages that show side-by-side diffs of 269 changes in your workspace, for easy communication of code 270 review materials. Can automagically find edited files or use a 271 manually-generated list; knows how to use wx's active file for 272 lists of checked-out files and proposed SCCS comments. 273 274wsdiff 275 Detect object differences between two ON proto areas. Used by 276 nightly(1) to determine what changed between two builds. Handy 277 for identifying the set of built objects impacted by a given 278 source change. This information is needed for patch construction. 279 280 281How to do a full build 282---------------------- 283 2841. Find an environment file that might do what you want to do. If you're just 285 a developer wanting to do a full build in a child of the gate, copy the 286 'developer' environment file to a new name (private to you and/or the 287 work being done in this workspace, to avoid collisions with others). Then 288 edit the file and tailor it to your workspace. Remember that this file 289 is a shell script, so it can do more than set environment variables. 290 2912. Login as 'gk' (or root, but your PATH and .make.machines for dmake will 292 not be right). Run 'nightly' and give it your environment file as an 293 option. 'nightly' will first look for your environment file in 294 /opt/onbld/env, and if it's not there then it will look for it as an 295 absolute or relative path. Some people put their environment files in 296 their workspace to keep them close. 297 2983. When 'nightly' is complete, it will send a summary of what happened to 299 $MAILTO. Usually, the less info in the mail the better. If you have failures, 300 you can go look at the full log of what happened, generally in 301 $CODEMGR_WS/log/log.<date>/nightly.log (the mail_msg it sent and the proto 302 list are there too). You can also find the individual build logs, like 303 'make clobber' and 'make install' output in $SRC, under names like 304 clobber-${MACH}.out and install-${MACH}.out (for a DEBUG build). These 305 will be smaller than nightly.log, and maybe more searchable. 306 307Files you have to update to add a tool 308-------------------------------------- 309 3101. Add the tool in its appropriate place. 3112. Update the Makefile as required. 3123. Update usr/src/tools/SUNWonbld/prototype_*. 3134. Update usr/src/tools/README.tools (this file). 3145. Repeat 1-4 for any man pages. 315