xref: /titanic_41/usr/src/man/man9f/csx_Parse_CISTPL_FUNCE.9f (revision 49d3bc91e27cd871b950d56c01398fa2f2e12ab4)
te
Copyright (c) 2002, Sun Microsystems, Inc. All Rights Reserved
The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
csx_Parse_CISTPL_FUNCE 9F "20 Dec 1996" "SunOS 5.11" "Kernel Functions for Drivers"
NAME
csx_Parse_CISTPL_FUNCE - parse Function Extension tuple
SYNOPSIS

#include <sys/pccard.h>



int32_t csx_Parse_CISTPL_FUNCE(client_handle_t ch, tuple_t *tu, 
 cistpl_funce_t *cf,
 uint32_t fid);
INTERFACE LEVEL

Solaris DDI Specific (Solaris DDI)

PARAMETERS

ch

Client handle returned from csx_RegisterClient(9F).

tu

Pointer to a tuple_t structure (see tuple(9S)) returned by a call to csx_GetFirstTuple(9F) or csx_GetNextTuple(9F).

cf

Pointer to a cistpl_funce_t structure which contains the parsed CISTPL_FUNCE tuple information upon return from this function.

fid

The function ID code to which this CISTPL_FUNCE tuple refers. See csx_Parse_CISTPL_FUNCID(9F).

DESCRIPTION

This function parses the Function Extension tuple, CISTPL_FUNCE, into a form usable by PC Card drivers.

The CISTPL_FUNCE tuple is used to describe information about a specific PCCard function. The information provided is determined by the Function Identification tuple, CISTPL_FUNCID, that is being extended. Each function has a defined set of extension tuples.

STRUCTURE MEMBERS

The structure members of cistpl_funce_t are:

uint32_t function; /* type of extended data */
uint32_t subfunction;
union {
 struct serial {
 uint32_t ua; /* UART in use */
 uint32_t uc; /* UART capabilities */
 } serial;
 struct modem {
 uint32_t fc; /* supported flow control methods */
 uint32_t cb; /* size of DCE command buffer */
 uint32_t eb; /* size of DCE to DCE buffer */
 uint32_t tb; /* size of DTE to DCE buffer */
 } modem;
 struct data_modem {
 uint32_t ud; /* highest data rate */
 uint32_t ms; /* modulation standards */
 uint32_t em; /* err correct proto and 
 /* non-CCITT modulation */
 uint32_t dc; /* data compression protocols */
 uint32_t cm; /* command protocols */
 uint32_t ex; /* escape mechanisms */
 uint32_t dy; /* standardized data encryption */
 uint32_t ef; /* miscellaneous end user features */
 uint32_t ncd; /* number of country codes */
 uchar_t cd[16]; /* CCITT country code */
 } data_modem;
 struct fax {
 uint32_t uf; /* highest data rate in DTE/UART */
 uint32_t fm; /* CCITT modulation standards */
 uint32_t fy; /* standardized data encryption */
 uint32_t fs; /* feature selection */
 uint32_t ncf; /* number of country codes */
 uchar_t cf[16]; /* CCITT country codes */
 } fax;
 struct voice {
 uint32_t uv; /* highest data rate */
 uint32_t nsr;
 uint32_t sr[16]; /* voice sampling rates (*100) */
 uint32_t nss;
 uint32_t ss[16]; /* voice sample sizes (*10) */
 uint32_t nsc;
 uint32_t sc[16]; /* voice compression methods */
 } voice;
 struct lan {
 uint32_t tech; /* network technology */
 uint32_t speed; /* media bit or baud rate */
 uint32_t media; /* network media supported */
 uint32_t con; /* open/closed connector standard */
 uint32_t id_sz; /* length of lan station id */
 uchar_t id[16]; /* station ID */
 } lan;
} data;

The fields are defined as follows:

function

This field identifies the type of extended information provided about a function by the CISTPL_FUNCE tuple. This field is defined as follows:

TPLFE_SUB_SERIAL

Serial port interface

TPLFE_SUB_MODEM_COMMON

Common modem interface

TPLFE_SUB_MODEM_DATA

Data modem services

TPLFE_SUB_MODEM_FAX

Fax modem services

TPLFE_SUB_VOICE

Voice services

TPLFE_CAP_MODEM_DATA

Capabilities of the data modem interface

TPLFE_CAP_MODEM_FAX

Capabilities of the fax modem interface

TPLFE_CAP_MODEM_VOICE

Capabilities of the voice modem interface

TPLFE_CAP_SERIAL_DATA

Serial port interface for data modem services

TPLFE_CAP_SERIAL_FAX

Serial port interface for fax modem services

TPLFE_CAP_SERIAL_VOICE

Serial port interface for voice modem services

subfunction

This is for identifying a sub-category of services provided by a function in the CISTPL_FUNCE tuple. The numeric value of the code is in the range of 1 to 15.

ua

This is the serial port UART identification and is defined as follows:

TPLFE_UA_8250

Intel 8250

TPLFE_UA_16450

NS 16450

TPLFE_UA_16550

NS 16550

uc

This identifies the serial port UART capabilities and is defined as follows:

TPLFE_UC_PARITY_SPACE

Space parity supported

TPLFE_UC_PARITY_MARK

Mark parity supported

TPLFE_UC_PARITY_ODD

Odd parity supported

TPLFE_UC_PARITY_EVEN

Even parity supported

TPLFE_UC_CS5

5 bit characters supported

TPLFE_UC_CS6

6 bit characters supported

TPLFE_UC_CS7

7 bit characters supported

TPLFE_UC_CS8

8 bit characters supported

TPLFE_UC_STOP_1

1 stop bit supported

TPLFE_UC_STOP_15

1.5 stop bits supported

TPLFE_UC_STOP_2

2 stop bits supported

fc

This identifies the modem flow control methods and is defined as follows:

TPLFE_FC_TX_XONOFF

Transmit XON/XOFF

TPLFE_FC_RX_XONOFF

Receiver XON/XOFF

TPLFE_FC_TX_HW

Transmit hardware flow control (CTS)

TPLFE_FC_RX_HW

Receiver hardware flow control (RTS)

TPLFE_FC_TRANS

Transparent flow control

ms

This identifies the modem modulation standards and is defined as follows:

TPLFE_MS_BELL103

300bps

TPLFE_MS_V21

300bps (V.21)

TPLFE_MS_V23

600/1200bps (V.23)

TPLFE_MS_V22AB

1200bps (V.22A V.22B)

TPLFE_MS_BELL212

2400bps (US Bell 212

TPLFE_MS_V22BIS

2400bps (V.22bis)

TPLFE_MS_V26

2400bps leased line (V.26)

TPLFE_MS_V26BIS

2400bps (V.26bis)

TPLFE_MS_V27BIS

4800/2400bps leased line (V.27bis)

TPLFE_MS_V29

9600/7200/4800 leased line (V.29)

TPLFE_MS_V32

Up to 9600bps (V.32)

TPLFE_MS_V32BIS

Up to 14400bps (V.32bis)

TPLFE_MS_VFAST

Up to 28800 V.FAST

em

This identifies modem error correction/detection protocols and is defined as follows:

TPLFE_EM_MNP

MNP levels 2-4

TPLFE_EM_V42

CCITT LAPM (V.42)

dc

This identifies modem data compression protocols and is defined as follows:

TPLFE_DC_V42BI

CCITT compression V.42

TPLFE_DC_MNP5

MNP compression (uses MNP 2, 3 or 4)

cm

This identifies modem command protocols and is defined as follows:

TPLFE_CM_AT1

ANSI/EIA/TIA 602 "Action" commands

TPLFE_CM_AT2

ANSI/EIA/TIA 602 "ACE/DCE IF Params"

TPLFE_CM_AT3

ANSI/EIA/TIA 602 "Ace Parameters"

TPLFE_CM_MNP_AT

MNP specification AT commands

TPLFE_CM_V25BIS

V.25bis calling commands

TPLFE_CM_V25A

V.25bis test procedures

TPLFE_CM_DMCL

DMCL command mode

ex

This identifies the modem escape mechanism and is defined as follows:

TPLFE_EX_BREAK

BREAK support standardized

TPLFE_EX_PLUS

+++ returns to command mode

TPLFE_EX_UD

User defined escape character

dy

This identifies modem standardized data encryption and is a reserved field for future use and must be set to 0.

ef

This identifies modem miscellaneous features and is defined as follows:

TPLFE_EF_CALLERID

Caller ID is supported

fm

This identifies fax modulation standards and is defined as follows:

TPLFE_FM_V21C2

300bps (V.21-C2)

TPLFE_FM_V27TER

4800/2400bps (V.27ter)

TPLFE_FM_V29

9600/7200/4800 leased line (V.29)

TPLFE_FM_V17

14.4K/12K/9600/7200bps (V.17)

TPLFE_FM_V33

4.4K/12K/9600/7200 leased line (V.33)

fs

This identifies the fax feature selection and is defined as follows:

TPLFE_FS_T3

Group 2 (T.3) service class

TPLFE_FS_T4

Group 3 (T.4) service class

TPLFE_FS_T6

Group 4 (T.6) service class

TPLFE_FS_ECM

Error Correction Mode

TPLFE_FS_VOICEREQ

Voice requests allowed

TPLFE_FS_POLLING

Polling support

TPLFE_FS_FTP

File transfer support

TPLFE_FS_PASSWORD

Password support

tech

This identifies the LAN technology type and is defined as follows:

TPLFE_LAN_TECH_ARCNET

Arcnet

TPLFE_LAN_TECH_ETHERNET

Ethernet

TPLFE_LAN_TECH_TOKENRING

Token Ring

TPLFE_LAN_TECH_LOCALTALK

Local Talk

TPLFE_LAN_TECH_FDDI

TPLFE_LAN_TECH_ATM

ATM

TPLFE_LAN_TECH_WIRELESS

Wireless

media

This identifies the LAN media type and is defined as follows:

TPLFE_LAN_MEDIA_INHERENT

Generic interface

TPLFE_LAN_MEDIA_UTP

Unshielded twisted pair

TPLFE_LAN_MEDIA_STP

Shielded twisted pair

TPLFE_LAN_MEDIA_THIN_COAX

Thin coax

TPLFE_LAN_MEDIA_THICK_COAX

Thick coax

TPLFE_LAN_MEDIA_FIBER

Fiber

TPLFE_LAN_MEDIA_SSR_902

Spread spectrum radio 902-928 MHz

TPLFE_LAN_MEDIA_SSR_2_4

Spread spectrum radio 2.4 GHz

TPLFE_LAN_MEDIA_SSR_5_4

Spread spectrum radio 5.4 GHz

TPLFE_LAN_MEDIA_DIFFUSE_IR

Diffuse infra red

TPLFE_LAN_MEDIA_PTP_IR

Point to point infra red

RETURN VALUES

CS_SUCCESS

Successful operation.

CS_BAD_HANDLE

Client handle is invalid.

CS_UNKNOWN_TUPLE

Parser does not know how to parse tuple.

CS_NO_CARD

No PC Card in socket.

CS_NO_CIS

No Card Information Structure (CIS) on PC Card.

CS_UNSUPPORTED_FUNCTION

No PCMCIA hardware installed.

CONTEXT

This function may be called from user or kernel context.

SEE ALSO

csx_GetFirstTuple(9F), csx_GetTupleData(9F), csx_Parse_CISTPL_FUNCID(9F), csx_RegisterClient(9F), csx_ValidateCIS(9F), tuple(9S)

PC Card 95 Standard, PCMCIA/JEIDA