xref: /titanic_41/usr/src/man/man7d/yge.7d (revision 048b02791572fec28722a0c06dec096503552ca7)
te
Copyright (c) 2009, Sun Microsystems, Inc. All rights reserved.
The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
yge 7D "15 Sep 2009" "SunOS 5.11" "Devices"
NAME
yge - Marvell Yukon 2 Ethernet device driver
SYNOPSIS
/dev/net/yge
DESCRIPTION

The yge driver supports Marvell Yukon 2 Fast Ethernet and Gigabit Ethernet controllers.

"Properties"

The following properties can be configured using dladm(1M):

adv_autoneg_cap

Enables (default) or disables IEEE 802.3 auto-negotiation of link speed and duplex settings. If enabled, the device negotiates among the supported (and configured, see below) link options with the link partner. If disabled, at least one of the link options below must be specified. The driver selects the first enabled link option according to the IEEE 802.3 specified preferences.

adv_1000fdx_cap

Enables the 1000 Mbps full-duplex link option.

adv_1000hdx_cap

Enables the 1000 Mbps half-duplex link option.

adv_100T4_cap

Enables the 100 BaseT4 link option. (Note that most hardware does not support this unusual link style. Also, this uses two pairs of wires for data, rather than one.)

adv_100fdx_cap

Enables the 1000 Mbps full-duplex link option.

adv_100hdx_cap

Enables the 1000 Mbps half-duplex link option.

adv_10fdx_cap

Enables the 10 Base-T full-duplex link option.

adv_10hdx_cap

Enables the 10 Base-T half-duplex link option.

mtu

On most devices, can be set between 1500 (default) and 9000. This property can only be changed when the device is not in use.

FILES

/dev/net/yge

Special network device

/kernel/drv/yge

32-bit driver binary (x86)

/kernel/drv/amd64/yge

64-bit driver binary (x86)

/kernel/drv/sparcv9/yge

64-bit driver binary (SPARC)

ATTRIBUTES

See attributes(5) for a descriptions of the following attributes:

ATTRIBUTE TYPEATTRIBUTE VALUE
Architecturex86, SPARC
Interface StabilityCommitted
SEE ALSO

dladm(1M), attributes(5), dlpi(7P)