Copyright 1999 Sun Microsystems, Inc. All Rights Reserved.
The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
The set of probes (trace instrumentation points) available in the standard kernel. The probes log trace data to a kernel trace buffer in Trace Normal Form (TNF). Kernel probes are controlled by prex(1). A snapshot of the kernel trace buffer can be made using tnfxtract(1) and examined using tnfdump(1).
Each probe has a name and is associated with a set of symbolic keys, or categories. These are used to select and control probes from prex(1). A probe that is enabled for tracing generates a TNF record, called an event record. An event record contains two common members and may contain other probe-specific data members.
tnf_probe_event tag tnf_time_delta time_delta
tag
Encodes TNF references to two other records:
tag
Describes the layout of the event record.
schedule
Identifies the writing thread and also contains a 64-bit base time in nanoseconds.
time_delta
A 32-bit time offset from the base time; the sum of the two times is the actual time of the event.
tnf_kthread_id tid tnf_pid pid tnf_symbol start_pc
Thread creation event.
tid
The thread identifier for the new thread.
pid
The process identifier for the new thread.
start_pc
The kernel address of its start routine.
tnf_kthread_id tid tnf_microstate state
Thread microstate transition events.
tid
Optional; if it is absent, the event is for the writing thread, otherwise the event is for the specified thread.
state
Indicates the thread state:
Running in user mode.
Running in system mode.
Asleep waiting for a user-mode lock.
Asleep on a kernel object.
Runnable (waiting for a cpu).
Stopped.
Thread termination event for writing thread. This probe has no data members other than the common members.
tnf_kthread_id tid tnf_cpuid cpuid tnf_long priority tnf_ulong queue_length
Thread scheduling events. These are triggered when a runnable thread is placed on a dispatch queue.
cpuid
Specifies the cpu to which the queue is attached.
priority
The (global) dispatch priority of the thread.
queue_length
The current length of the cpu's dispatch queue.
tnf_opaque reason tnf_symbols stack
Thread blockage event. This probe captures a partial stack backtrace when the current thread blocks.
reason
The address of the object on which the thread is blocking.
symbols
References a TNF array of kernel addresses representing the PCs on the stack at the time the thread blocks.
tnf_sysnum sysnum
System call entry event.
sysnum
The system call number. The writing thread implicitly enters the system microstate with this event.
tnf_long rval1 tnf_long rval2 tnf_long errno
System call exit event.
rval1 and rval2
The two return values of the system call
errno
The error return.
The writing thread implicitly enters the user microstate with this event.
tnf_opaque address tnf_fault_type fault_type tnf_seg_access access
Address-space fault event.
address
Gives the faulting virtual address.
fault_type
Gives the fault type: invalid page, protection fault, software requested locking or unlocking.
access
Gives the desired access protection: read, write, execute or create. The values for these two members are defined in <vm/seg_enum.h>.
tnf_opaque vnode tnf_offset offset
Major page fault event. The faulting page is mapped to the file given by the vnode member, at the given offset into the file. (The faulting virtual address is in the most recent address_fault event for the writing thread.)
tnf_opaque address
Copy-on-write page fault event.
address
The virtual address at which the new page is mapped.
tnf_opaque address
Zero-fill page fault event.
address
The virtual address at which the new page is mapped.
tnf_opaque vnode tnf_offset offset
Page unmapping event. This probe marks the unmapping of a file system page from the system.
vnode and offset
Identifies the file and offset of the page being unmapped.
tnf_opaque vnode tnf_offset offset tnf_size size
Pagein start event. This event signals the initiation of pagein I/O.
vnodeandoffset
Identifyies the file and offset to be paged in.
size
Specifies the number of bytes to be paged in.
tnf_opaque vnode tnf_ulong pages_pageout tnf_ulong pages_freed tnf_ulong pages_reclaimed
Pageout completion event. This event signals the completion of pageout I/O.
vnode
Identifies the file of the pageout request.
pages_pageout
The number of pages written out.
pages_freed
The number of pages freed after being written out.
pages_reclaimed
The number of pages reclaimed after being written out.
tnf_ulong pages_free tnf_ulong pages_needed
Page daemon scan start event. This event signals the beginning of one iteration of the page daemon.
pages_free
The number of free pages in the system.
pages_needed
The number of pages desired free.
tnf_ulong pages_free tnf_ulong pages_scanned
Page daemon scan end event. This event signals the end of one iteration of the page daemon.
pages_free
The number of free pages in the system.
pages_scanned
The number of pages examined by the page daemon. (Potentially more pages will be freed when any queued pageout requests complete.)
tnf_pid pid tnf_ulong page_count
Address space swapout event. This event marks the swapping out of a process address space.
pid
Identifies the process.
page_count
Reports the number of pages either freed or queued for pageout.
tnf_pid pid tnf_lwpid lwpid tnf_kthread_id tid tnf_ulong page_count
Light-weight process swapout event. This event marks the swapping out of an LWP and its stack.
pid
The LWP's process identifier
lwpid
The LWP identifier
tid member
The LWP's kernel thread identifier.
page_count
The number of pages swapped out.
tnf_pid pid tnf_lwpid lwpid tnf_kthread_id tid tnf_ulong page_count
Light-weight process swapin event. This event marks the swapping in of an LWP and its stack.
pid
The LWP's process identifier.
lwpid
The LWP identifier.
tid
The LWP's kernel thread identifier.
page_count
The number of pages swapped in.
tnf_device device tnf_diskaddr block tnf_size size tnf_opaque buf tnf_bioflags flags
Block I/O strategy event. This event marks a call to the strategy(9E) function of a block device driver.
device
Contains the major and minor numbers of the device.
block
The logical block number to be accessed on the device.
size
The size of the I/O request.
buf
The kernel address of the buf(9S) structure associated with the transfer.
flags
The buf(9S) flags associated with the transfer.
tnf_device device tnf_diskaddr block tnf_opaque buf
Buffered I/O completion event. This event marks calls to the biodone(9F) function.
device
Contains the major and minor numbers of the device.
block
The logical block number accessed on the device.
buf
The kernel address of the buf(9S) structure associated with the transfer.
tnf_device device tnf_offset offset tnf_size size tnf_bioflags rw
Raw I/O start event. This event marks entry into the physio(9F) fufnction which performs unbuffered I/O.
device
Contains the major and minor numbers of the device of the transfer.
offset
The logical offset on the device for the transfer.
size
The number of bytes to be transferred.
rw
The direction of the transfer: read or write (see buf(9S)).
tnf_device device
Raw I/O end event. This event marks exit from the physio(9F) fufnction.
device
The major and minor numbers of the device of the transfer.
Use the prex utility to control kernel probes. The standard prex commands to list and manipulate probes are available to you, along with commands to set up and manage kernel tracing.
Kernel probes write trace records into a kernel trace buffer. You must copy the buffer into a TNF file for post-processing; use the tnfxtract utility for this.
You use the tnfdump utility to examine a kernel trace file. This is exactly the same as examining a user-level trace file.
The steps you typically follow to take a kernel trace are:
1. Become superuser (su).
2. Allocate a kernel trace buffer of the desired size (prex).
3. Select the probes you want to trace and enable (prex).
4. Turn kernel tracing on (prex).
5. Run your application.
6. Turn kernel tracing off (prex).
7. Extract the kernel trace buffer (tnfxtract).
8. Disable all probes (prex).
9. Deallocate the kernel trace buffer (prex).
10. Examine the trace file (tnfdump).
A convenient way to follow these steps is to use two shell windows; run an interactive prex session in one, and run your application and tnfxtract in the other.
prex(1), tnfdump(1), tnfxtract(1), libtnfctl(3TNF), TNF_PROBE(3TNF), tracing(3TNF), strategy(9E), biodone(9F), physio(9F), buf(9S)