man/man1m/stmfadm.1m

         te
 Copyright (c) 2009, Sun Microsystems, Inc. All Rights Reserved
 The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
 See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
 fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
 stmfadm 1M "30 Jul 2009" "SunOS 5.11" "System Administration Commands"
 NAME
stmfadm - SCSI target mode framework command line interface
 SYNOPSIS

stmfadm add-hg-member -g, --group-name group-name group-member...


stmfadm add-tg-member -g, --group-name group-name group-member...


stmfadm add-view [-n, --lun logical-unit-number
 -t, --target-group group-name -h, --host-group group-name] lu-name


stmfadm create-hg group-name


stmfadm create-lu [-p, --lu-prop logical-unit-property=val
 -s, --size size] lu-file


stmfadm create-tg group-name


stmfadm delete-hg group-name


stmfadm delete-lu lu-name


stmfadm delete-tg group-name


stmfadm import-lu lu-file


stmfadm list-hg [-v] [host-group-name...]


stmfadm list-tg [-v] [target-group-name...]


stmfadm list-lu [-v] [lu-name...]


stmfadm list-target [-v] [target-name...]


stmfadm list-view -l, --lu-name lu-name [entry-name...]


stmfadm list-state


stmfadm modify-lu [-p, --lu-prop logical-unit-property=val
 -s, --size size, -f, --file] lu-name|lu-file


stmfadm online-lu lu-name


stmfadm offline-lu lu-name


stmfadm online-lu target-name


stmfadm offline-lu target-name


stmfadm remove-hg-member -g, --group-name group-name group-member...


stmfadm remove-tg-member -g, --group-name group-name group-member...


stmfadm remove-view -l, --lu-name lu-name entry-name


 DESCRIPTION

The stmfadm command configures logical units within the SCSI Target Mode
Framework (STMF) framework. The framework and this man page use the following
terminology:

initiator

A device responsible for issuing SCSI I/O commands to a SCSI target and logical
unit.


target

A device responsible for receiving SCSI I/O commands for a logical unit.


logical unit

A device within a target responsible for executing SCSI I/O commands.


logical unit number

The identifier of a logical unit within a target.


initiator group

An initiator group is a set of one or more initiators that are combined for the
purposes of being applied to a view (see below). An initiator cannot be a
member of more than one initiator group.


target group

A target group is a set of one or more SCSI target ports that are treated the
same when creating a view (see below). The set of logical units that a
particular SCSI initiator can see is determined by the combined set of views.
Each logical unit has a set of view entries, and each view entry specifies a
target group, host group, and a LUN. An initiator from that host group, when
connecting through that target group, is able to identify and connect to that
logical unit using the specified LUN. You can use views to restrict the set of
logical units that a specific initiator can see, and assign the set of LUNs
that will be used.


view

A view defines the association of an initiator group, a target group, and a
logical unit number with a specified logical unit. Any view entry added to a
logical unit must not be in conflict with existing view entries for that
logical unit. A view entry is considered to be in conflict when an attempt is
made to duplicate the association of any given initiator, target and logical
unit number. As an example, logical unit LU_0 has the following view
entry associated with it:
Logical Unit: LU_0
 View Entry: 0
 initiator group: HostA
 target group: All targets
 logical unit number: 32


If you attempted the following:
# stmf add-view -n 31 -h HostA LU_0


...the operation would return an error with a message indicating that the
view entry is in conflict with one or more existing view entries. This conflict
arises because the existing view entry, 0, already has mapped LU_0
to logical unit number 32 for the initiator group HostA.


 SUB-COMMANDS

The stmfadm command supports the subcommands listed below.

add-view [-n, --lun logical-unit-number -t,
--target-group group-name -h, --host-group
group-name] lu-name

Adds a logical unit view entry to a logical unit lu-name, where
lu-name is the STMF name for the logical unit as displayed by the
list-lu subcommand. The add-view subcommand provides the user with
a mechanism to implement access control for a logical unit and also provides a
means of assigning a logical unit number to a logical unit for a given set of
initiators and targets. A logical unit will not be available to any initiators
until at least one view is applied. Each view entry gets assigned an entry
name, which can be used to reference the entry in the remove-view and
list-view subcommands.
add-view supports the following options:

-n, --lun logical-unit-number

logical-unit-number is an integer in the range 0-16383 to be assigned to
the logical unit for this view entry. If this option is not specified, a
logical unit number will be assigned by the STMF framework.


-t, --target-group group-name

group-name is the name of a target group previously created using the
STMF create-tg subcommand. If this option is not specified, the logical
unit will be available through all targets.


-h, -host-group group-name

group-name is the name of an host group previously created using the STMF
create-hg subcommand. If this option is not specified, the logical unit
will be available to all initiators that log in to the STMF framework.


add-hg-member -g group-name group member...

Add a host group member to a host group. group-name must be an existing
group created using the create-hg subcommand. group member can be
specified as name_type.name_value, where name_type can be one
of the following:
wwn
iqn
eui


...and name_value is the value of the initiator name. As an example, to
add a fibre channel initiator port world-wide name 200000e08b909221 to
the host group HostA, the command would be:
# stmfadm add-hg-member -g HostA wwn.200000e08b909221


To add an ISCSI initiator node member with the name
iqn.1986-03.com.sun:01.46f7e262 to HostA, the command would be:
# stmfadm add-hg-member -g HostA iqn.1986-03.com.sun:01.46f7e262


Alternatively, members can be specified using their SCSI name string
identifiers. To add the two initiators above using their SCSI name string
identifiers, the commands would be:
# stmfadm add-hg-member -g HostA eui.200000e08b909221
# stmfadm add-hg-member -g HostA iqn.1986-03.com.sun:01.46f7e262


A host group member cannot be a member of more than one host group.


add-tg-member -g group-name group member...

Add a target group member to a target group. group-name must be an
existing group created using the create-tg subcommand. group member
can be specified as name_type.name_value, where name_type can
be one of the following:
wwn
iqn
eui


...and name_value is the value of the target name. As an example, to
add a fibre channel target port world-wide name 501000e092376af7 to the
target group TG0, the command would be:
# stmfadm add-tg-member -g TG0 wwn.501000e092376af7


To add an ISCSI target member with the name
iqn.1986-03.com.sun:target.01.01110 to TG0, the command would be:
# stmfadm add-tg-member -g TG0 iqn.1986-03.com.sun:target.01.01110


Alternatively, members can be specified using their SCSI name string
identifiers. To add the two targets above using their SCSI name string
identifiers, the commands would be:
# stmfadm add-tg-member -g TG0 eui.501000e092376af7
# stmfadm add-tg-member -g TG0 iqn.1986-03.com.sun:target.01.01110


A target group member cannot be a member of more than one target group.


create-hg group-name

Create an initiator group with the name group-name. group-name is a
string of Unicode characters with a maximum length of 255. The group name must
be unique within the STMF system.


create-lu [-p, --lu-prop
logical-unit-property=val --s, --size size]
lu-file

Create a logical unit that can be registered with STMF. For the -p
option, logical-unit-property can be one of the following properties:

alias

Up to 255 characters, representing a user-defined name for the device. The
default is the name of the backing store.


blk

Specifies the block size for the device. The default is 512.


guid

Thirty-two hexadecimal ASCII characters representing a valid NAA Registered
Extended Identifier. The default is set by the STMF to a generated value.


meta

Metadata file name. When specified, will be used to hold the SCSI metadata for
the logical unit. There is no default.


mgmt-url

Up to 1024 characters representing a Management Network Address URL. More than
one URL can be passed as a single parameter by using space-delimited URLs
enclosed inside a single pair of quotation marks (").


oui

Organizational Unique Identifier. Six hexadecimal ASCII characters representing
the IEEE OUI company ID assignment. This will be used to generate the device
identifier (GUID). The default is 00144F.


pid

Sixteen characters of product identification SCSI SPC-3. This value will be
reflected in the Standard INQUIRY data returned for the device. The
default is COMSTAR.


serial

Serial Number. Specifies the SCSI Vital Product Data Serial Number (page
80h). It is a character value up to 252 bytes in length. There is no
default value.


vid

Eight characters of vendor identification per SCSI SPC-3. This value will be
reflected in the Standard INQUIRY data returned for the device. The
default is SUN.


wcd

Write-back cache disable. Specify true or falseto determine
write-back cache disable behavior. The default is the write-back cache setting
of the backing store device specified by the lu-file argument.


wp

Write-protect bit. Specify true or false to determine whether the
device reports as write-protected. The default is false.


For the -s option, size is an integer followed by one of the
following letters, to indicate a unit of size:

k

kilobyte


m

megabyte


g

gigabyte


t

terabyte


p

petabyte


e

exabyte


lu-file is the file to be used as the backing store for the logical unit.
If the -s option is not specified, the size of the specified
lu-file will be used as the size of the logical unit. Logical units
registered with the STMF require space for the metadata to be stored. When a
zvol is specified as the backing store device, the default will be to use
a special property of the zvol to contain the metadata. For all other
devices, the default behavior will be to use the first 64k of the device. An
alternative approach would be to use the meta property in a
create-lu command to specify an alternate file to contain the metadata.
It is advisable to use a file that can provide sufficient storage of the
logical unit metadata, preferably 64k.


create-tg group-name

Create a target group with the name group-name. group-name is a
string of Unicode characters with a maximum length of 255. The group name must
be unique within the STMF system.


delete-hg group-name

Delete the host group that identified by group-name.


delete-lu lu-name

Deletes an existing logical unit that was created using stmfadm
create-lu. This effectively unloads the logical unit from the STMF
framework. Any existing data on the logical unit remains intact.


delete-tg group-name

Delete the target group that identified by group-name.


import-lu lu-file

Imports and loads a logical unit into the STMF that was previously created
using stmfadm create-lu and was then deleted from the STMF using
stmfadm delete-lu. On success, the logical unit is again made available
to the STMF. lu-file is the filename used in the stmfadm create-lu
command. If this logical unit is using a separate metadata file, the filename
in the meta property value that was used in the stmfadm create-lu
command must be used here.


list-hg [-v,--verbose] [host-group-name...]

Lists information for the host group in the system referenced by
host-group-name. If host-group-name is not specified, all host
groups in the system will be listed. If the --v or --verbose option
is specified, all members within a host group are displayed.


list-lu [-v,--verbose] [lu-name...]

Lists information for the logical unit in the system referenced by
lu-name. If lu-name is not specified, all logical units in the
system will be listed. If the -v or --verbose option is specified,
additional information about the logical unit will be displayed.


list-target [-v,--verbose] [target-name...]

Lists information for the target port in the system referenced by
target-name. If target name is not specified, all target ports in the
system will be listed. If the -v or --verbose option is specified,
additional information about the target along with SCSI session information for
logged-in initiators is displayed.


list-tg [-v,--verbose] [target-group-name...]

Lists information for the target group in the system referenced by
target-group-name. If target-group-name is not specified, all
target groups in the system will be listed. If the --v or --verbose
option is specified, all members within a target group are displayed.


list-view --l, --lu-name lu-name
[entry-name...]

Lists the view entry for the logical unit referenced by lu-name. If
entry-name is not specified, all view entries for the specified logical
unit will be listed.


modify-lu [-p, --lu-prop
logical-unit-property=val --s, --size size,
-f, --file] lu-name|lu-file

Modifies attributes of a logical unit created using the stmfadm create-lu
command. For the -p option, logical-unit-property can be one of the
following properties:

alias

Up to 255 characters, representing a user-defined name for the device. The
default is the name of the backing store.


mgmt-url

Up to 1024 characters representing a Management Network Address URL. More than
one URL can be passed as a single parameter by using space-delimited URLs
enclosed inside a single pair of quotation marks (").


wcd

Write-back cache disable. Specify true or falseto determine
write-back cache disable behavior. The default is the write-back cache setting
of the backing store device specified by the lu-file argument.


wp

Write-protect bit. Specify true or false to determine whether the
device reports as write-protected. The default is false.


For the -s option, size is an integer followed by one of the
following letters, to indicate a unit of size:

k

kilobyte


m

megabyte


g

gigabyte


t

terabyte


p

petabyte


e

exabyte


lu-name is the guid of the logical unit to be modified. If the
-f option is specified, the operand is interpreted as a file name. This
provides the ability to modify a logical unit that is not currently imported
into the STMF.


online-lu lu-name

Online a logical unit currently registered with the STMF.


online-target target-name

Online the specified target.


offline-lu lu-name

Offline a logical unit currently registered with the STMF.


offline-target target-name

Online the specified target.


list-state

Lists the operational and configuration state of the STMF.


remove-hg-member -g group-name group member

Removes a host group member from a host group. group-name must be an
existing group created using the create-hg subcommand. group member
can be specified as name_type.name_value, where name_type can
be one of the following:
wwn
iqn
eui


...and name_value is the value of the initiator name. As an example, to
remove the fibre channel initiator port world-wide name 200000e08b909221
from the host group HostA, the command would be:
# stmfadm remove-hg-member -g HostA wwn.200000e08b909221


To remove the ISCSI initiator node member with the name
iqn.1986-03.com.sun:01.46f7e262 from HostA, the command would be:
# stmfadm remove-hg-member -g HostA iqn.1986-03.com.sun:01.46f7e262


Alternatively, members can be specified using their SCSI name string
identifiers. To remove the two initiators above using their SCSI name string
identifiers, the commands would be:
# stmfadm remove-hg-member -g HostA eui.200000e08b909221
# stmfadm remove-hg-member -g HostA iqn.1986-03.com.sun:01.46f7e262


remove-tg-member -g group-name group member

Removes a target group member from a target group. group-name must be an
existing group created using the create-tg subcommand. group member
can be specified as name_type.name_value, where name_type can
be one of the following:
wwn
iqn
eui


...and name_value is the value of the target name. As an example, to
remove the fibre channel target port world-wide name 501000e092376af7
from the target group TG0, the command would be:
# stmfadm remove-tg-member -g TG0 wwn.501000e092376af7


To remove the ISCSI target member with the name
iqn.1986-03.com.sun:target.01.01110 from TG0, the command would be:
# stmfadm remove-tg-member -g TG0 iqn.1986-03.com.sun:target.01.01110


Alternatively, members can be specified using their SCSI name string
identifiers. To remove the two targets above using their SCSI name string
identifiers, the commands would be:
# stmfadm remove-tg-member -g TG0 eui.501000e092376af7
# stmfadm remove-tg-member -g TG0 iqn.1986-03.com.sun:target.01.01110


remove-view --l, --lu-name lu-name
entry-name

Removes one or more logical unit view entries from a logical unit.


 EXAMPLES

Example 1 Creating a Host group with Two Initiator Ports

The following commands use the create-hg and add-hg-member
subcommands to create a host group and add two initiator ports to that host
group.

# stmfadm create-hg host-group-a
# stmfadm add-hg-member -g host-group-a wwn.210105b0000d92d0


Example 2 Adding a View Entry to a Logical Unit

The following command uses the add-view subcommand to allow access from
host-group-a to a logical unit.

# stmfadm add-view -h host-group-a 6000AE40C5000000000046FC4FEA001C


Example 3 Listing a View Entry

The following command uses the list-view subcommand to list all view
entries for the specified logical unit.

# stmfadm list-view -l 6000AE40C5000000000046FC4FEA001C
View Entry: 0
 Host group : host-group-a
 Target group : All
 LUN : 0


 ATTRIBUTES

See attributes(5) for descriptions of the following attributes:


ATTRIBUTE TYPEATTRIBUTE VALUE
Interface StabilityCommitted


 SEE ALSO

sbdadm(1M), attributes(5)