xref: /titanic_41/usr/src/lib/libzfs/common/libzfs_status.c (revision 774ef820abb3ffe8f38adcc17dee852d45d871a0)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #pragma ident	"%Z%%M%	%I%	%E% SMI"
27 
28 /*
29  * This file contains the functions which analyze the status of a pool.  This
30  * include both the status of an active pool, as well as the status exported
31  * pools.  Returns one of the ZPOOL_STATUS_* defines describing the status of
32  * the pool.  This status is independent (to a certain degree) from the state of
33  * the pool.  A pool's state descsribes only whether or not it is capable of
34  * providing the necessary fault tolerance for data.  The status describes the
35  * overall status of devices.  A pool that is online can still have a device
36  * that is experiencing errors.
37  *
38  * Only a subset of the possible faults can be detected using 'zpool status',
39  * and not all possible errors correspond to a FMA message ID.  The explanation
40  * is left up to the caller, depending on whether it is a live pool or an
41  * import.
42  */
43 
44 #include <libzfs.h>
45 #include <string.h>
46 #include "libzfs_impl.h"
47 
48 /*
49  * Message ID table.  This must be kep in sync with the ZPOOL_STATUS_* defines
50  * in libzfs.h.  Note that there are some status results which go past the end
51  * of this table, and hence have no associated message ID.
52  */
53 static char *msgid_table[] = {
54 	"ZFS-8000-14",
55 	"ZFS-8000-2Q",
56 	"ZFS-8000-3C",
57 	"ZFS-8000-4J",
58 	"ZFS-8000-5E",
59 	"ZFS-8000-6X",
60 	"ZFS-8000-72",
61 	"ZFS-8000-8A",
62 	"ZFS-8000-9P",
63 	"ZFS-8000-A5"
64 };
65 
66 /*
67  * If the pool is active, a certain class of static errors is overridden by the
68  * faults as analayzed by FMA.  These faults have separate knowledge articles,
69  * and the article referred to by 'zpool status' must match that indicated by
70  * the syslog error message.  We override missing data as well as corrupt pool.
71  */
72 static char *msgid_table_active[] = {
73 	"ZFS-8000-14",
74 	"ZFS-8000-D3",		/* overridden */
75 	"ZFS-8000-D3",		/* overridden */
76 	"ZFS-8000-4J",
77 	"ZFS-8000-5E",
78 	"ZFS-8000-6X",
79 	"ZFS-8000-CS",		/* overridden */
80 	"ZFS-8000-8A",
81 	"ZFS-8000-9P",
82 	"ZFS-8000-CS",		/* overridden */
83 };
84 
85 #define	NMSGID	(sizeof (msgid_table) / sizeof (msgid_table[0]))
86 
87 /* ARGSUSED */
88 static int
89 vdev_missing(uint64_t state, uint64_t aux, uint64_t errs)
90 {
91 	return (state == VDEV_STATE_CANT_OPEN &&
92 	    aux == VDEV_AUX_OPEN_FAILED);
93 }
94 
95 /* ARGSUSED */
96 static int
97 vdev_errors(uint64_t state, uint64_t aux, uint64_t errs)
98 {
99 	return (errs != 0);
100 }
101 
102 /* ARGSUSED */
103 static int
104 vdev_broken(uint64_t state, uint64_t aux, uint64_t errs)
105 {
106 	return (state == VDEV_STATE_CANT_OPEN);
107 }
108 
109 /* ARGSUSED */
110 static int
111 vdev_offlined(uint64_t state, uint64_t aux, uint64_t errs)
112 {
113 	return (state == VDEV_STATE_OFFLINE);
114 }
115 
116 /*
117  * Detect if any leaf devices that have seen errors or could not be opened.
118  */
119 static boolean_t
120 find_vdev_problem(nvlist_t *vdev, int (*func)(uint64_t, uint64_t, uint64_t))
121 {
122 	nvlist_t **child;
123 	vdev_stat_t *vs;
124 	uint_t c, children;
125 	char *type;
126 
127 	/*
128 	 * Ignore problems within a 'replacing' vdev, since we're presumably in
129 	 * the process of repairing any such errors, and don't want to call them
130 	 * out again.  We'll pick up the fact that a resilver is happening
131 	 * later.
132 	 */
133 	verify(nvlist_lookup_string(vdev, ZPOOL_CONFIG_TYPE, &type) == 0);
134 	if (strcmp(type, VDEV_TYPE_REPLACING) == 0)
135 		return (B_FALSE);
136 
137 	if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_CHILDREN, &child,
138 	    &children) == 0) {
139 		for (c = 0; c < children; c++)
140 			if (find_vdev_problem(child[c], func))
141 				return (B_TRUE);
142 	} else {
143 		verify(nvlist_lookup_uint64_array(vdev, ZPOOL_CONFIG_STATS,
144 		    (uint64_t **)&vs, &c) == 0);
145 
146 		if (func(vs->vs_state, vs->vs_aux,
147 		    vs->vs_read_errors +
148 		    vs->vs_write_errors +
149 		    vs->vs_checksum_errors))
150 			return (B_TRUE);
151 	}
152 
153 	return (B_FALSE);
154 }
155 
156 /*
157  * Active pool health status.
158  *
159  * To determine the status for a pool, we make several passes over the config,
160  * picking the most egregious error we find.  In order of importance, we do the
161  * following:
162  *
163  *	- Check for a complete and valid configuration
164  *	- Look for any missing devices in a non-replicated config
165  *	- Check for any data errors
166  *	- Check for any missing devices in a replicated config
167  *	- Look for any devices showing errors
168  *	- Check for any resilvering devices
169  *
170  * There can obviously be multiple errors within a single pool, so this routine
171  * only picks the most damaging of all the current errors to report.
172  */
173 static zpool_status_t
174 check_status(nvlist_t *config, boolean_t isimport)
175 {
176 	nvlist_t *nvroot;
177 	vdev_stat_t *vs;
178 	uint_t vsc;
179 	uint64_t nerr;
180 	uint64_t version;
181 
182 	verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION,
183 	    &version) == 0);
184 	verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE,
185 	    &nvroot) == 0);
186 	verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_STATS,
187 	    (uint64_t **)&vs, &vsc) == 0);
188 
189 	/*
190 	 * Newer on-disk version.
191 	 */
192 	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
193 	    vs->vs_aux == VDEV_AUX_VERSION_NEWER)
194 		return (ZPOOL_STATUS_VERSION_NEWER);
195 
196 	/*
197 	 * Check that the config is complete.
198 	 */
199 	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
200 	    vs->vs_aux == VDEV_AUX_BAD_GUID_SUM)
201 		return (ZPOOL_STATUS_BAD_GUID_SUM);
202 
203 	/*
204 	 * Missing devices in non-replicated config.
205 	 */
206 	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
207 	    find_vdev_problem(nvroot, vdev_missing))
208 		return (ZPOOL_STATUS_MISSING_DEV_NR);
209 
210 	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
211 	    find_vdev_problem(nvroot, vdev_broken))
212 		return (ZPOOL_STATUS_CORRUPT_LABEL_NR);
213 
214 	/*
215 	 * Corrupted pool metadata
216 	 */
217 	if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
218 	    vs->vs_aux == VDEV_AUX_CORRUPT_DATA)
219 		return (ZPOOL_STATUS_CORRUPT_POOL);
220 
221 	/*
222 	 * Persistent data errors.
223 	 */
224 	if (!isimport) {
225 		if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRCOUNT,
226 		    &nerr) == 0 && nerr != 0)
227 			return (ZPOOL_STATUS_CORRUPT_DATA);
228 	}
229 
230 	/*
231 	 * Missing devices in a replicated config.
232 	 */
233 	if (find_vdev_problem(nvroot, vdev_missing))
234 		return (ZPOOL_STATUS_MISSING_DEV_R);
235 	if (find_vdev_problem(nvroot, vdev_broken))
236 		return (ZPOOL_STATUS_CORRUPT_LABEL_R);
237 
238 	/*
239 	 * Devices with errors
240 	 */
241 	if (!isimport && find_vdev_problem(nvroot, vdev_errors))
242 		return (ZPOOL_STATUS_FAILING_DEV);
243 
244 	/*
245 	 * Offlined devices
246 	 */
247 	if (find_vdev_problem(nvroot, vdev_offlined))
248 		return (ZPOOL_STATUS_OFFLINE_DEV);
249 
250 	/*
251 	 * Currently resilvering
252 	 */
253 	if (!vs->vs_scrub_complete && vs->vs_scrub_type == POOL_SCRUB_RESILVER)
254 		return (ZPOOL_STATUS_RESILVERING);
255 
256 	/*
257 	 * Outdated, but usable, version
258 	 */
259 	if (version < ZFS_VERSION)
260 		return (ZPOOL_STATUS_VERSION_OLDER);
261 
262 	return (ZPOOL_STATUS_OK);
263 }
264 
265 zpool_status_t
266 zpool_get_status(zpool_handle_t *zhp, char **msgid)
267 {
268 	zpool_status_t ret = check_status(zhp->zpool_config, B_FALSE);
269 
270 	if (ret >= NMSGID)
271 		*msgid = NULL;
272 	else
273 		*msgid = msgid_table_active[ret];
274 
275 	return (ret);
276 }
277 
278 zpool_status_t
279 zpool_import_status(nvlist_t *config, char **msgid)
280 {
281 	zpool_status_t ret = check_status(config, B_TRUE);
282 
283 	if (ret >= NMSGID)
284 		*msgid = NULL;
285 	else
286 		*msgid = msgid_table[ret];
287 
288 	return (ret);
289 }
290