1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21 22# 23# Copyright 2010 Sun Microsystems, Inc. All rights reserved. 24# Use is subject to license terms. 25# 26 27LIBCDIR= $(SRC)/lib/libc 28LIB_PIC= libc_pic.a 29VERS= .1 30CPP= /usr/lib/cpp 31TARGET_ARCH= sparc 32 33# objects are grouped by source directory 34 35# local objects 36STRETS= 37 38CRTOBJS= \ 39 __align_cpy_2.o \ 40 __align_cpy_4.o \ 41 __align_cpy_8.o \ 42 _ftou.o \ 43 cerror.o 44 45DYNOBJS= 46 47FPOBJS= \ 48 _D_cplx_div.o \ 49 _D_cplx_div_ix.o \ 50 _D_cplx_div_rx.o \ 51 _D_cplx_mul.o \ 52 _F_cplx_div.o \ 53 _F_cplx_div_ix.o \ 54 _F_cplx_div_rx.o \ 55 _F_cplx_mul.o \ 56 _Q_add.o \ 57 _Q_cmp.o \ 58 _Q_cmpe.o \ 59 _Q_cplx_div.o \ 60 _Q_cplx_div_ix.o \ 61 _Q_cplx_div_rx.o \ 62 _Q_cplx_lr_div.o \ 63 _Q_cplx_lr_div_ix.o \ 64 _Q_cplx_lr_div_rx.o \ 65 _Q_cplx_lr_mul.o \ 66 _Q_cplx_mul.o \ 67 _Q_div.o \ 68 _Q_dtoq.o \ 69 _Q_fcc.o \ 70 _Q_itoq.o \ 71 _Q_mul.o \ 72 _Q_neg.o \ 73 _Q_qtod.o \ 74 _Q_qtoi.o \ 75 _Q_qtos.o \ 76 _Q_qtou.o \ 77 _Q_scl.o \ 78 _Q_sqrt.o \ 79 _Q_stoq.o \ 80 _Q_sub.o \ 81 _Q_utoq.o 82 83FPOBJS64= \ 84 _Qp_qtox.o \ 85 _Qp_qtoux.o \ 86 _Qp_xtoq.o \ 87 _Qp_uxtoq.o \ 88 __dtoul.o \ 89 __ftoul.o 90 91FPASMOBJS= \ 92 _Q_get_rp_rd.o \ 93 __quad_mag64.o \ 94 fpgetmask.o \ 95 fpgetrnd.o \ 96 fpgetsticky.o \ 97 fpsetmask.o \ 98 fpsetrnd.o \ 99 fpsetsticky.o 100 101$(__GNUC)FPASMOBJS += \ 102 __quad.o 103 104ATOMICOBJS= \ 105 atomic.o 106 107XATTROBJS= \ 108 xattr_common.o 109 110COMOBJS= \ 111 bcmp.o \ 112 bcopy.o \ 113 bsearch.o \ 114 bzero.o \ 115 ffs.o \ 116 memccpy.o \ 117 qsort.o \ 118 strtol.o \ 119 strtoul.o \ 120 strtoll.o \ 121 strtoull.o 122 123GENOBJS= \ 124 _getsp.o \ 125 _xregs_clrptr.o \ 126 abs.o \ 127 alloca.o \ 128 byteorder.o \ 129 cuexit.o \ 130 ecvt.o \ 131 getctxt.o \ 132 lock.o \ 133 makectxt.o \ 134 memchr.o \ 135 memcmp.o \ 136 new_list.o \ 137 setjmp.o \ 138 siginfolst.o \ 139 siglongjmp.o \ 140 sparc_data.o \ 141 strcasecmp.o \ 142 strchr.o \ 143 strcmp.o \ 144 strlcpy.o \ 145 strncmp.o \ 146 strncpy.o \ 147 strnlen.o \ 148 swapctxt.o \ 149 sync_instruction_memory.o 150 151# Preserved solely to ease maintenance of 32-bit and 64-bit library builds 152# This macro should ALWAYS be empty; native APIs are already 'large file'. 153COMSYSOBJS64= 154 155SYSOBJS64= 156 157COMSYSOBJS= \ 158 __clock_timer.o \ 159 __getloadavg.o \ 160 __rusagesys.o \ 161 __signotify.o \ 162 __sigrt.o \ 163 __time.o \ 164 _lgrp_home_fast.o \ 165 _lgrpsys.o \ 166 _nfssys.o \ 167 _portfs.o \ 168 _pset.o \ 169 _rpcsys.o \ 170 _sigaction.o \ 171 _so_accept.o \ 172 _so_bind.o \ 173 _so_connect.o \ 174 _so_getpeername.o \ 175 _so_getsockname.o \ 176 _so_getsockopt.o \ 177 _so_listen.o \ 178 _so_recv.o \ 179 _so_recvfrom.o \ 180 _so_recvmsg.o \ 181 _so_send.o \ 182 _so_sendmsg.o \ 183 _so_sendto.o \ 184 _so_setsockopt.o \ 185 _so_shutdown.o \ 186 _so_socket.o \ 187 _so_socketpair.o \ 188 _sockconfig.o \ 189 acct.o \ 190 acl.o \ 191 adjtime.o \ 192 alarm.o \ 193 brk.o \ 194 chdir.o \ 195 chmod.o \ 196 chroot.o \ 197 cladm.o \ 198 close.o \ 199 execve.o \ 200 exit.o \ 201 facl.o \ 202 fchdir.o \ 203 fchmod.o \ 204 fchroot.o \ 205 fdsync.o \ 206 fpathconf.o \ 207 fstatfs.o \ 208 fstatvfs.o \ 209 getcpuid.o \ 210 getdents.o \ 211 getegid.o \ 212 geteuid.o \ 213 getgid.o \ 214 getgroups.o \ 215 gethrtime.o \ 216 getitimer.o \ 217 getmsg.o \ 218 getpid.o \ 219 getpmsg.o \ 220 getppid.o \ 221 getrlimit.o \ 222 getuid.o \ 223 gtty.o \ 224 install_utrap.o \ 225 ioctl.o \ 226 kaio.o \ 227 kill.o \ 228 link.o \ 229 llseek.o \ 230 lseek.o \ 231 memcntl.o \ 232 mincore.o \ 233 mkdir.o \ 234 mknod.o \ 235 mmap.o \ 236 mmapobjsys.o \ 237 modctl.o \ 238 mount.o \ 239 mprotect.o \ 240 munmap.o \ 241 nice.o \ 242 ntp_adjtime.o \ 243 ntp_gettime.o \ 244 p_online.o \ 245 pathconf.o \ 246 pause.o \ 247 pcsample.o \ 248 pollsys.o \ 249 pread.o \ 250 priocntlset.o \ 251 processor_bind.o \ 252 processor_info.o \ 253 profil.o \ 254 putmsg.o \ 255 putpmsg.o \ 256 pwrite.o \ 257 read.o \ 258 readlink.o \ 259 readv.o \ 260 resolvepath.o \ 261 seteguid.o \ 262 setgid.o \ 263 setgroups.o \ 264 setitimer.o \ 265 setreid.o \ 266 setrlimit.o \ 267 setuid.o \ 268 sigaltstk.o \ 269 sigprocmsk.o \ 270 sigsendset.o \ 271 sigsuspend.o \ 272 statfs.o \ 273 statvfs.o \ 274 stty.o \ 275 symlink.o \ 276 sync.o \ 277 sysconfig.o \ 278 sysfs.o \ 279 sysinfo.o \ 280 syslwp.o \ 281 times.o \ 282 ulimit.o \ 283 umask.o \ 284 umount2.o \ 285 utssys.o \ 286 uucopy.o \ 287 vhangup.o \ 288 waitid.o \ 289 write.o \ 290 writev.o \ 291 yield.o 292 293SYSOBJS= \ 294 __clock_gettime.o \ 295 __getcontext.o \ 296 __uadmin.o \ 297 _lwp_mutex_unlock.o \ 298 _stack_grow.o \ 299 door.o \ 300 forkx.o \ 301 forkallx.o \ 302 gettimeofday.o \ 303 pipe.o \ 304 sparc_utrap_install.o \ 305 syscall.o \ 306 tls_get_addr.o \ 307 uadmin.o \ 308 umount.o \ 309 uname.o \ 310 vforkx.o 311 312# Preserved solely to ease maintenance of 32-bit and 64-bit library builds 313# This macro should ALWAYS be empty; native APIs are already 'large file'. 314PORTGEN64= 315 316# objects from source under $(LIBCDIR)/port 317PORTFP= \ 318 __flt_decim.o \ 319 __flt_rounds.o \ 320 __tbl_10_b.o \ 321 __tbl_10_h.o \ 322 __tbl_10_s.o \ 323 __tbl_2_b.o \ 324 __tbl_2_h.o \ 325 __tbl_2_s.o \ 326 __tbl_fdq.o \ 327 __tbl_tens.o \ 328 __x_power.o \ 329 _base_sup.o \ 330 aconvert.o \ 331 decimal_bin.o \ 332 double_decim.o \ 333 econvert.o \ 334 fconvert.o \ 335 file_decim.o \ 336 finite.o \ 337 fp_data.o \ 338 func_decim.o \ 339 gconvert.o \ 340 hex_bin.o \ 341 ieee_globals.o \ 342 pack_float.o \ 343 sigfpe.o \ 344 string_decim.o 345 346PORTGEN= \ 347 _env_data.o \ 348 _xftw.o \ 349 a64l.o \ 350 abort.o \ 351 addsev.o \ 352 assert.o \ 353 attrat.o \ 354 atof.o \ 355 atoi.o \ 356 atol.o \ 357 atoll.o \ 358 attropen.o \ 359 atexit.o \ 360 atfork.o \ 361 basename.o \ 362 calloc.o \ 363 catgets.o \ 364 catopen.o \ 365 cfgetispeed.o \ 366 cfgetospeed.o \ 367 cfree.o \ 368 cfsetispeed.o \ 369 cfsetospeed.o \ 370 cftime.o \ 371 clock.o \ 372 closedir.o \ 373 closefrom.o \ 374 confstr.o \ 375 crypt.o \ 376 csetlen.o \ 377 ctime.o \ 378 ctime_r.o \ 379 daemon.o \ 380 deflt.o \ 381 directio.o \ 382 dirname.o \ 383 div.o \ 384 drand48.o \ 385 dup.o \ 386 env_data.o \ 387 err.o \ 388 errno.o \ 389 euclen.o \ 390 event_port.o \ 391 execvp.o \ 392 fattach.o \ 393 fdetach.o \ 394 fdopendir.o \ 395 fmtmsg.o \ 396 ftime.o \ 397 ftok.o \ 398 ftw.o \ 399 gcvt.o \ 400 getauxv.o \ 401 getcwd.o \ 402 getdate_err.o \ 403 getdtblsize.o \ 404 getenv.o \ 405 getexecname.o \ 406 getgrnam.o \ 407 getgrnam_r.o \ 408 gethostid.o \ 409 gethostname.o \ 410 gethz.o \ 411 getisax.o \ 412 getloadavg.o \ 413 getlogin.o \ 414 getmntent.o \ 415 getnetgrent.o \ 416 getopt.o \ 417 getopt_long.o \ 418 getpagesize.o \ 419 getpw.o \ 420 getpwnam.o \ 421 getpwnam_r.o \ 422 getrusage.o \ 423 getspent.o \ 424 getspent_r.o \ 425 getsubopt.o \ 426 gettxt.o \ 427 getusershell.o \ 428 getut.o \ 429 getutx.o \ 430 getvfsent.o \ 431 getwd.o \ 432 getwidth.o \ 433 getxby_door.o \ 434 gtxt.o \ 435 hsearch.o \ 436 iconv.o \ 437 imaxabs.o \ 438 imaxdiv.o \ 439 index.o \ 440 initgroups.o \ 441 insque.o \ 442 isaexec.o \ 443 isastream.o \ 444 isatty.o \ 445 killpg.o \ 446 klpdlib.o \ 447 l64a.o \ 448 lckpwdf.o \ 449 lconstants.o \ 450 ldivide.o \ 451 lexp10.o \ 452 lfind.o \ 453 lfmt.o \ 454 lfmt_log.o \ 455 lldiv.o \ 456 llog10.o \ 457 lltostr.o \ 458 lmath.o \ 459 localtime.o \ 460 lsearch.o \ 461 madvise.o \ 462 malloc.o \ 463 memalign.o \ 464 mkdev.o \ 465 mkdtemp.o \ 466 mkfifo.o \ 467 mkstemp.o \ 468 mktemp.o \ 469 mlock.o \ 470 mlockall.o \ 471 mon.o \ 472 msync.o \ 473 munlock.o \ 474 munlockall.o \ 475 ndbm.o \ 476 nftw.o \ 477 nlspath_checks.o \ 478 nsparse.o \ 479 nss_common.o \ 480 nss_dbdefs.o \ 481 nss_deffinder.o \ 482 opendir.o \ 483 opt_data.o \ 484 perror.o \ 485 pfmt.o \ 486 pfmt_data.o \ 487 pfmt_print.o \ 488 plock.o \ 489 poll.o \ 490 posix_fadvise.o \ 491 posix_fallocate.o \ 492 posix_madvise.o \ 493 posix_memalign.o \ 494 priocntl.o \ 495 privlib.o \ 496 priv_str_xlate.o \ 497 psiginfo.o \ 498 psignal.o \ 499 pt.o \ 500 putpwent.o \ 501 putspent.o \ 502 raise.o \ 503 rand.o \ 504 random.o \ 505 rctlops.o \ 506 readdir.o \ 507 readdir_r.o \ 508 realpath.o \ 509 reboot.o \ 510 regexpr.o \ 511 remove.o \ 512 rewinddir.o \ 513 rindex.o \ 514 scandir.o \ 515 seekdir.o \ 516 select.o \ 517 setlabel.o \ 518 setpriority.o \ 519 settimeofday.o \ 520 sh_locks.o \ 521 sigflag.o \ 522 siglist.o \ 523 sigsend.o \ 524 sigsetops.o \ 525 ssignal.o \ 526 stack.o \ 527 str2sig.o \ 528 strcase_charmap.o \ 529 strcat.o \ 530 strcspn.o \ 531 strdup.o \ 532 strerror.o \ 533 strncat.o \ 534 strlcat.o \ 535 strncasecmp.o \ 536 strpbrk.o \ 537 strrchr.o \ 538 strsep.o \ 539 strsignal.o \ 540 strspn.o \ 541 strstr.o \ 542 strtod.o \ 543 strtoimax.o \ 544 strtok.o \ 545 strtok_r.o \ 546 strtoumax.o \ 547 swab.o \ 548 swapctl.o \ 549 sysconf.o \ 550 syslog.o \ 551 tcdrain.o \ 552 tcflow.o \ 553 tcflush.o \ 554 tcgetattr.o \ 555 tcgetpgrp.o \ 556 tcgetsid.o \ 557 tcsendbreak.o \ 558 tcsetattr.o \ 559 tcsetpgrp.o \ 560 tell.o \ 561 telldir.o \ 562 tfind.o \ 563 time_data.o \ 564 time_gdata.o \ 565 truncate.o \ 566 tsdalloc.o \ 567 tsearch.o \ 568 ttyname.o \ 569 ttyslot.o \ 570 ualarm.o \ 571 ucred.o \ 572 valloc.o \ 573 vlfmt.o \ 574 vpfmt.o \ 575 waitpid.o \ 576 walkstack.o \ 577 wdata.o \ 578 xgetwidth.o \ 579 xpg4.o \ 580 xpg6.o 581 582PORTPRINT_W= \ 583 doprnt_w.o 584 585PORTPRINT= \ 586 asprintf.o \ 587 doprnt.o \ 588 fprintf.o \ 589 printf.o \ 590 snprintf.o \ 591 sprintf.o \ 592 vfprintf.o \ 593 vprintf.o \ 594 vsnprintf.o \ 595 vsprintf.o \ 596 vwprintf.o \ 597 wprintf.o 598 599# Preserved solely to ease maintenance of 32-bit and 64-bit library builds 600# This macro should ALWAYS be empty; native APIs are already 'large file'. 601PORTSTDIO64= 602 603PORTSTDIO_W= \ 604 doscan_w.o 605 606PORTSTDIO= \ 607 __extensions.o \ 608 _endopen.o \ 609 _filbuf.o \ 610 _findbuf.o \ 611 _flsbuf.o \ 612 _wrtchk.o \ 613 clearerr.o \ 614 ctermid.o \ 615 ctermid_r.o \ 616 cuserid.o \ 617 data.o \ 618 doscan.o \ 619 fdopen.o \ 620 feof.o \ 621 ferror.o \ 622 fgetc.o \ 623 fgets.o \ 624 fileno.o \ 625 flockf.o \ 626 flush.o \ 627 fopen.o \ 628 fpos.o \ 629 fputc.o \ 630 fputs.o \ 631 fread.o \ 632 fseek.o \ 633 fseeko.o \ 634 ftell.o \ 635 ftello.o \ 636 fwrite.o \ 637 getc.o \ 638 getchar.o \ 639 getpass.o \ 640 gets.o \ 641 getw.o \ 642 popen.o \ 643 putc.o \ 644 putchar.o \ 645 puts.o \ 646 putw.o \ 647 rewind.o \ 648 scanf.o \ 649 setbuf.o \ 650 setbuffer.o \ 651 setvbuf.o \ 652 system.o \ 653 tempnam.o \ 654 tmpfile.o \ 655 tmpnam_r.o \ 656 ungetc.o \ 657 mse.o \ 658 vscanf.o \ 659 vwscanf.o \ 660 wscanf.o 661 662PORTI18N= \ 663 __fgetwc_xpg5.o \ 664 __fgetws_xpg5.o \ 665 __fputwc_xpg5.o \ 666 __fputws_xpg5.o \ 667 __ungetwc_xpg5.o \ 668 getwchar.o \ 669 putwchar.o \ 670 putws.o \ 671 strtows.o \ 672 wcstoimax.o \ 673 wcstol.o \ 674 wcstoul.o \ 675 wcswcs.o \ 676 wscasecmp.o \ 677 wscat.o \ 678 wschr.o \ 679 wscmp.o \ 680 wscpy.o \ 681 wscspn.o \ 682 wsdup.o \ 683 wslen.o \ 684 wsncasecmp.o \ 685 wsncat.o \ 686 wsncmp.o \ 687 wsncpy.o \ 688 wspbrk.o \ 689 wsprintf.o \ 690 wsrchr.o \ 691 wsscanf.o \ 692 wsspn.o \ 693 wstod.o \ 694 wstok.o \ 695 wstol.o \ 696 wstoll.o \ 697 wsxfrm.o \ 698 wmemchr.o \ 699 wmemcmp.o \ 700 wmemcpy.o \ 701 wmemmove.o \ 702 wmemset.o \ 703 wcsstr.o \ 704 gettext.o \ 705 gettext_real.o \ 706 gettext_util.o \ 707 gettext_gnu.o \ 708 plural_parser.o \ 709 wdresolve.o \ 710 _ctype.o \ 711 isascii.o \ 712 toascii.o 713 714PORTI18N_COND= \ 715 wcstol_longlong.o \ 716 wcstoul_longlong.o 717 718AIOOBJS= \ 719 aio.o \ 720 aio_alloc.o \ 721 posix_aio.o 722 723RTOBJS= \ 724 clock_timer.o \ 725 mqueue.o \ 726 pos4obj.o \ 727 sched.o \ 728 sem.o \ 729 shm.o \ 730 sigev_thread.o 731 732TPOOLOBJS= \ 733 thread_pool.o 734 735THREADSOBJS= \ 736 alloc.o \ 737 assfail.o \ 738 cancel.o \ 739 door_calls.o \ 740 pthr_attr.o \ 741 pthr_barrier.o \ 742 pthr_cond.o \ 743 pthr_mutex.o \ 744 pthr_rwlock.o \ 745 pthread.o \ 746 rwlock.o \ 747 scalls.o \ 748 sema.o \ 749 sigaction.o \ 750 spawn.o \ 751 synch.o \ 752 tdb_agent.o \ 753 thr.o \ 754 thread_interface.o \ 755 tls.o \ 756 tsd.o 757 758THREADSMACHOBJS= \ 759 machdep.o 760 761THREADSASMOBJS= \ 762 asm_subr.o 763 764UNICODEOBJS= \ 765 u8_textprep.o \ 766 uconv.o 767 768UNWINDMACHOBJS= \ 769 unwind.o 770 771UNWINDASMOBJS= \ 772 unwind_frame.o 773 774# Preserved solely to ease maintenance of 32-bit and 64-bit library builds 775# This macro should ALWAYS be empty; native APIs are already 'large file'. 776PORTSYS64= 777 778PORTSYS= \ 779 _autofssys.o \ 780 access.o \ 781 acctctl.o \ 782 bsd_signal.o \ 783 chown.o \ 784 corectl.o \ 785 exacctsys.o \ 786 execl.o \ 787 execle.o \ 788 execv.o \ 789 fcntl.o \ 790 getpagesizes.o \ 791 getpeerucred.o \ 792 inst_sync.o \ 793 issetugid.o \ 794 label.o \ 795 libc_link.o \ 796 lockf.o \ 797 lwp.o \ 798 lwp_cond.o \ 799 lwp_rwlock.o \ 800 lwp_sigmask.o \ 801 meminfosys.o \ 802 msgsys.o \ 803 nfssys.o \ 804 open.o \ 805 pgrpsys.o \ 806 posix_sigwait.o \ 807 ppriv.o \ 808 psetsys.o \ 809 rctlsys.o \ 810 rename.o \ 811 sbrk.o \ 812 semsys.o \ 813 set_errno.o \ 814 sharefs.o \ 815 shmsys.o \ 816 sidsys.o \ 817 siginterrupt.o \ 818 signal.o \ 819 sigpending.o \ 820 sigstack.o \ 821 stat.o \ 822 tasksys.o \ 823 time.o \ 824 time_util.o \ 825 ucontext.o \ 826 unlink.o \ 827 ustat.o \ 828 utimesys.o \ 829 zone.o 830 831PORTREGEX= \ 832 glob.o \ 833 regcmp.o \ 834 regex.o \ 835 wordexp.o 836 837VALUES= values-Xa.o 838 839MOSTOBJS= \ 840 $(STRETS) \ 841 $(CRTOBJS) \ 842 $(DYNOBJS) \ 843 $(FPOBJS) \ 844 $(FPOBJS64) \ 845 $(FPASMOBJS) \ 846 $(ATOMICOBJS) \ 847 $(XATTROBJS) \ 848 $(COMOBJS) \ 849 $(GENOBJS) \ 850 $(PRFOBJS) \ 851 $(PORTFP) \ 852 $(PORTGEN) \ 853 $(PORTGEN64) \ 854 $(PORTI18N) \ 855 $(PORTI18N_COND) \ 856 $(PORTPRINT) \ 857 $(PORTPRINT_W) \ 858 $(PORTREGEX) \ 859 $(PORTSTDIO) \ 860 $(PORTSTDIO64) \ 861 $(PORTSTDIO_W) \ 862 $(PORTSYS) \ 863 $(PORTSYS64) \ 864 $(AIOOBJS) \ 865 $(RTOBJS) \ 866 $(TPOOLOBJS) \ 867 $(THREADSOBJS) \ 868 $(THREADSMACHOBJS) \ 869 $(THREADSASMOBJS) \ 870 $(UNICODEOBJS) \ 871 $(UNWINDMACHOBJS) \ 872 $(UNWINDASMOBJS) \ 873 $(COMSYSOBJS) \ 874 $(SYSOBJS) \ 875 $(COMSYSOBJS64) \ 876 $(SYSOBJS64) \ 877 $(VALUES) 878 879TRACEOBJS= \ 880 plockstat.o 881 882# NOTE: libc.so.1 must be linked with the minimal crti.o and crtn.o 883# modules whose source is provided in the $(SRC)/lib/common directory. 884# This must be done because otherwise the Sun C compiler would insert 885# its own versions of these modules and those versions contain code 886# to call out to C++ initialization functions. Such C++ initialization 887# functions can call back into libc before thread initialization is 888# complete and this leads to segmentation violations and other problems. 889# Since libc contains no C++ code, linking with the minimal crti.o and 890# crtn.o modules is safe and avoids the problems described above. 891OBJECTS= $(CRTI) $(MOSTOBJS) $(CRTN) 892CRTSRCS= ../../common/sparcv9 893 894# include common library definitions 895include $(SRC)/lib/Makefile.lib 896include $(SRC)/lib/Makefile.lib.64 897 898# NOTE: libc_i18n.a will be part of libc.so.1. Therefore, the compilation 899# conditions such as the settings of CFLAGS and CPPFLAGS for the libc_i18n stuff 900# need to be compatible with the ones for the libc stuff. Whenever the changes 901# that affect the compilation conditions of libc happened, those for libc_i18n 902# also need to be updated. 903 904# we need to override the default SONAME here because we might 905# be building a variant object (still libc.so.1, but different filename) 906SONAME = libc.so.1 907 908CFLAGS64 += $(CCVERBOSE) 909 910# This is necessary to avoid problems with calling _ex_unwind(). 911# We probably don't want any inlining anyway. 912CFLAGS64 += -xinline= 913 914# Setting THREAD_DEBUG = -DTHREAD_DEBUG (make THREAD_DEBUG=-DTHREAD_DEBUG ...) 915# enables ASSERT() checking in the threads portion of the library. 916# This is automatically enabled for DEBUG builds, not for non-debug builds. 917THREAD_DEBUG = 918$(NOT_RELEASE_BUILD)THREAD_DEBUG = -DTHREAD_DEBUG 919 920# Make string literals read-only to save memory. 921CFLAGS64 += $(XSTRCONST) 922 923ALTPICS= $(TRACEOBJS:%=pics/%) 924 925$(DYNLIB) := PICS += $(ROOTFS_LIBDIR64)/libc_i18n.a 926$(DYNLIB) := BUILD.SO = $(LD) -o $@ -G $(DYNFLAGS) $(PICS) $(ALTPICS) 927 928MAPFILES = $(LIBCDIR)/port/mapfile-vers $(LIBCDIR)/sparcv9/mapfile-vers \ 929 $(MAPFILE_AUX) 930 931sparcv9_C_PICFLAGS= -K PIC 932CFLAGS64 += $(EXTN_CFLAGS) 933CPPFLAGS= -D_REENTRANT -Dsparc $(EXTN_CPPFLAGS) $(THREAD_DEBUG) \ 934 -I$(LIBCBASE)/inc -I$(LIBCDIR)/inc $(CPPFLAGS.master) 935ASFLAGS= $(EXTN_ASFLAGS) -K PIC -P -D__STDC__ -D_ASM -D__sparcv9 $(CPPFLAGS) \ 936 $(sparcv9_AS_XARCH) 937 938# As a favor to the dtrace syscall provider, libc still calls the 939# old syscall traps that have been obsoleted by the *at() interfaces. 940# Delete this to compile libc using only the new *at() system call traps 941CPPFLAGS += -D_RETAIN_OLD_SYSCALLS 942 943# Inform the run-time linker about libc specialized initialization 944RTLDINFO = -z rtldinfo=tls_rtldinfo 945DYNFLAGS += $(RTLDINFO) 946 947# Force libc's internal references to be resolved immediately upon loading 948# in order to avoid critical region problems. Since almost all libc symbols 949# are marked 'protected' in the mapfiles, this is a minimal set (15 to 20). 950DYNFLAGS += -znow 951 952DYNFLAGS += $(EXTN_DYNFLAGS) 953 954BUILD.s= $(AS) $(ASFLAGS) $< -o $@ 955 956# Override this top level flag so the compiler builds in its native 957# C99 mode. This has been enabled to support the complex arithmetic 958# added to libc. 959C99MODE= $(C99_ENABLE) 960 961# libc method of building an archive 962BUILD.AR= $(RM) $@ ; \ 963 $(AR) q $@ `$(LORDER) $(MOSTOBJS:%=$(DIR)/%)| $(TSORT)` 964 965# extra files for the clean target 966CLEANFILES= \ 967 $(LIBCDIR)/port/gen/errlst.c \ 968 $(LIBCDIR)/port/gen/new_list.c \ 969 assym.h \ 970 genassym \ 971 pics/crti.o \ 972 pics/crtn.o \ 973 $(ALTPICS) 974 975CLOBBERFILES += $(LIB_PIC) 976 977# list of C source for lint 978SRCS= \ 979 $(ATOMICOBJS:%.o=$(SRC)/common/atomic/%.c) \ 980 $(XATTROBJS:%.o=$(SRC)/common/xattr/%.c) \ 981 $(COMOBJS:%.o=$(SRC)/common/util/%.c) \ 982 $(PORTFP:%.o=$(LIBCDIR)/port/fp/%.c) \ 983 $(PORTGEN:%.o=$(LIBCDIR)/port/gen/%.c) \ 984 $(PORTI18N:%.o=$(LIBCDIR)/port/i18n/%.c) \ 985 $(PORTPRINT:%.o=$(LIBCDIR)/port/print/%.c) \ 986 $(PORTREGEX:%.o=$(LIBCDIR)/port/regex/%.c) \ 987 $(PORTSTDIO:%.o=$(LIBCDIR)/port/stdio/%.c) \ 988 $(PORTSYS:%.o=$(LIBCDIR)/port/sys/%.c) \ 989 $(AIOOBJS:%.o=$(LIBCDIR)/port/aio/%.c) \ 990 $(RTOBJS:%.o=$(LIBCDIR)/port/rt/%.c) \ 991 $(TPOOLOBJS:%.o=$(LIBCDIR)/port/tpool/%.c) \ 992 $(THREADSOBJS:%.o=$(LIBCDIR)/port/threads/%.c) \ 993 $(THREADSMACHOBJS:%.o=$(LIBCDIR)/$(MACH)/threads/%.c) \ 994 $(UNICODEOBJS:%.o=$(SRC)/common/unicode/%.c) \ 995 $(UNWINDMACHOBJS:%.o=$(LIBCDIR)/port/unwind/%.c) \ 996 $(FPOBJS:%.o=$(LIBCDIR)/$(MACH)/fp/%.c) \ 997 $(FPOBJS64:%.o=$(LIBCBASE)/fp/%.c) \ 998 $(LIBCBASE)/crt/_ftou.c \ 999 $(LIBCBASE)/gen/_xregs_clrptr.c \ 1000 $(LIBCBASE)/gen/byteorder.c \ 1001 $(LIBCBASE)/gen/ecvt.c \ 1002 $(LIBCBASE)/gen/getctxt.c \ 1003 $(LIBCBASE)/gen/makectxt.c \ 1004 $(LIBCBASE)/gen/siginfolst.c \ 1005 $(LIBCBASE)/gen/siglongjmp.c \ 1006 $(LIBCBASE)/gen/swapctxt.c 1007 1008# conditional assignments 1009$(DYNLIB) := CRTI = crti.o 1010$(DYNLIB) := CRTN = crtn.o 1011 1012# Files which need the threads .il inline template 1013TIL= \ 1014 aio.o \ 1015 alloc.o \ 1016 assfail.o \ 1017 atexit.o \ 1018 atfork.o \ 1019 cancel.o \ 1020 door_calls.o \ 1021 errno.o \ 1022 getctxt.o \ 1023 lwp.o \ 1024 ma.o \ 1025 machdep.o \ 1026 posix_aio.o \ 1027 pthr_attr.o \ 1028 pthr_barrier.o \ 1029 pthr_cond.o \ 1030 pthr_mutex.o \ 1031 pthr_rwlock.o \ 1032 pthread.o \ 1033 rand.o \ 1034 rwlock.o \ 1035 scalls.o \ 1036 sched.o \ 1037 sema.o \ 1038 sigaction.o \ 1039 sigev_thread.o \ 1040 spawn.o \ 1041 stack.o \ 1042 swapctxt.o \ 1043 synch.o \ 1044 tdb_agent.o \ 1045 thr.o \ 1046 thread_interface.o \ 1047 thread_pool.o \ 1048 tls.o \ 1049 tsd.o \ 1050 unwind.o 1051 1052$(TIL:%=pics/%) := CFLAGS64 += $(LIBCBASE)/threads/sparcv9.il 1053 1054# Files in fp, port/fp subdirectories that need base.il inline template 1055IL= \ 1056 __flt_decim.o \ 1057 decimal_bin.o 1058 1059$(IL:%=pics/%) := CFLAGS64 += $(LIBCBASE)/fp/base.il 1060 1061# Files in fp subdirectory which need __quad.il inline template 1062QIL= \ 1063 _Q_add.o \ 1064 _Q_cmp.o \ 1065 _Q_cmpe.o \ 1066 _Q_div.o \ 1067 _Q_dtoq.o \ 1068 _Q_fcc.o \ 1069 _Q_mul.o \ 1070 _Q_qtod.o \ 1071 _Q_qtoi.o \ 1072 _Q_qtos.o \ 1073 _Q_qtou.o \ 1074 _Q_sqrt.o \ 1075 _Q_stoq.o \ 1076 _Q_sub.o \ 1077 _Qp_qtox.o \ 1078 _Qp_qtoux.o 1079 1080$(QIL:%=pics/%) := CFLAGS64 += $(LIBCDIR)/$(MACH)/fp/__quad.il 1081pics/_Qp%.o := CFLAGS64 += -I$(LIBCDIR)/$(MACH)/fp 1082pics/_Q%.o := sparcv9_COPTFLAG = -xO4 -xchip=ultra 1083 1084# Files in crt subdirectory which need muldiv64.il inline template 1085#CIL= mul64.o divrem64.o 1086#$(CIL:%=pics/%) := CFLAGS += $(LIBCBASE)/crt/mul64.il 1087 1088# large-file-aware components that should be built large 1089 1090#$(COMSYSOBJS64:%=pics/%) := \ 1091# CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 1092 1093#$(SYSOBJS64:%=pics/%) := \ 1094# CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 1095 1096#$(PORTGEN64:%=pics/%) := \ 1097# CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 1098 1099#$(PORTSTDIO64:%=pics/%) := \ 1100# CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 1101 1102#$(PORTSYS64:%=pics/%) := \ 1103# CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 1104 1105$(PORTSTDIO_W:%=pics/%) := \ 1106 CPPFLAGS += -D_WIDE 1107 1108$(PORTPRINT_W:%=pics/%) := \ 1109 CPPFLAGS += -D_WIDE 1110 1111$(PORTI18N_COND:%=pics/%) := \ 1112 CPPFLAGS += -D_WCS_LONGLONG 1113 1114# Files which need extra optimization 1115pics/getenv.o := sparcv9_COPTFLAG = -xO4 1116 1117.KEEP_STATE: 1118 1119all: $(LIBS) $(LIB_PIC) 1120 1121lint := CPPFLAGS += -I$(LIBCDIR)/$(MACH)/fp 1122lint := CPPFLAGS += -D_MSE_INT_H -D_LCONV_C99 1123lint := LINTFLAGS64 += -mn 1124 1125lint: 1126 @echo $(LINT.c) ... $(LDLIBS) 1127 @$(LINT.c) $(SRCS) $(LDLIBS) 1128 1129$(LINTLIB):= SRCS=$(LIBCDIR)/port/llib-lc 1130$(LINTLIB):= CPPFLAGS += -D_MSE_INT_H 1131$(LINTLIB):= LINTFLAGS64=-nvx -m64 1132 1133# object files that depend on inline template 1134$(TIL:%=pics/%): $(LIBCBASE)/threads/sparcv9.il 1135$(IL:%=pics/%): $(LIBCBASE)/fp/base.il 1136$(QIL:%=pics/%): $(LIBCDIR)/$(MACH)/fp/__quad.il 1137#$(CIL:%=pics/%): $(LIBCBASE)/crt/muldiv64.il 1138 1139# include common libc targets 1140include $(LIBCDIR)/Makefile.targ 1141 1142# We need to strip out all CTF and DOF data from the static library 1143$(LIB_PIC) := DIR = pics 1144$(LIB_PIC): pics $$(PICS) 1145 $(BUILD.AR) 1146 $(MCS) -d -n .SUNW_ctf $@ > /dev/null 2>&1 1147 $(MCS) -d -n .SUNW_dof $@ > /dev/null 2>&1 1148 $(AR) -ts $@ > /dev/null 1149 $(POST_PROCESS_A) 1150 1151# special cases 1152#$(STRETS:%=pics/%): crt/stret.s 1153# $(AS) $(ASFLAGS) -DSTRET$(@F:stret%.o=%) crt/stret.s -o $@ 1154# $(POST_PROCESS_O) 1155 1156#crt/_rtbootld.s: crt/_rtboot.s crt/_rtld.c 1157# $(CC) $(CPPFLAGS) -O -S -K pic crt/_rtld.c -o crt/_rtld.s 1158# $(CAT) crt/_rtboot.s crt/_rtld.s > $@ 1159# $(RM) crt/_rtld.s 1160 1161ASSYMDEP_OBJS= \ 1162 _lwp_mutex_unlock.o \ 1163 _stack_grow.o \ 1164 asm_subr.o \ 1165 setjmp.o \ 1166 tls_get_addr.o \ 1167 unwind_frame.o \ 1168 vforkx.o 1169 1170$(ASSYMDEP_OBJS:%=pics/%) := CPPFLAGS += -I. 1171 1172$(ASSYMDEP_OBJS:%=pics/%): assym.h 1173 1174# assym.h build rules 1175 1176GENASSYM_C = $(LIBCDIR)/$(MACH)/genassym.c 1177 1178# XXX A hack. Perhaps this should be 'CPPFLAGS.native' and 1179# live in Makefile.master 1180 1181CPPFLAGS.genassym = \ 1182 $(ENVCPPFLAGS1) $(ENVCPPFLAGS2) $(ENVCPPFLAGS3) $(ENVCPPFLAGS4) 1183 1184genassym: $(GENASSYM_C) 1185 $(NATIVECC) -I$(LIBCBASE)/inc -I$(LIBCDIR)/inc \ 1186 $(CPPFLAGS.genassym) -o $@ $(GENASSYM_C) 1187 1188OFFSETS = $(LIBCDIR)/$(MACH)/offsets.in 1189 1190assym.h: $(OFFSETS) genassym 1191 $(OFFSETS_CREATE) <$(OFFSETS) >$@ 1192 ./genassym >>$@ 1193 1194# derived C source and related explicit dependencies 1195$(LIBCDIR)/port/gen/new_list.c: $(LIBCDIR)/port/gen/errlist $(LIBCDIR)/port/gen/errlist.awk 1196 cd $(LIBCDIR)/port/gen; pwd; $(AWK) -f errlist.awk < errlist 1197 1198pics/new_list.o: $(LIBCDIR)/port/gen/new_list.c 1199