xref: /titanic_41/usr/src/lib/libc/port/gen/getutx.c (revision cc1a9a89a73172cc2db053635fab3b1b91691657)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 /*	Copyright (c) 1988 AT&T	*/
28 /*	  All Rights Reserved  	*/
29 
30 /*
31  * University Copyright- Copyright (c) 1982, 1986, 1988
32  * The Regents of the University of California
33  * All Rights Reserved
34  *
35  * University Acknowledgment- Portions of this document are derived from
36  * software developed by the University of California, Berkeley, and its
37  * contributors.
38  */
39 
40 
41 /*
42  * Routines to read and write the /etc/utmpx file. Also contains
43  * binary compatibility routines to support the old utmp interfaces
44  * on systems with MAXPID <= SHRT_MAX.
45  */
46 
47 #include "lint.h"
48 #include <sys/types.h>
49 #include <stdio.h>
50 #include <sys/param.h>
51 #include <sys/stat.h>
52 #include <utmpx.h>
53 #include <errno.h>
54 #include <fcntl.h>
55 #include <string.h>
56 #include <strings.h>
57 #include <unistd.h>
58 #include <ctype.h>
59 #include <stdlib.h>
60 #include <sys/wait.h>
61 #include <pthread.h>
62 #include <limits.h>
63 #include <signal.h>
64 #include <spawn.h>
65 
66 #define	IDLEN		4	/* length of id field in utmp */
67 #define	SC_WILDC	0xff	/* wild char for utmp ids */
68 #define	MAXFILE		79	/* Maximum pathname length for "utmpx" file */
69 
70 #define	MAXVAL		255		/* max value for an id `character' */
71 #define	IPIPE		"/var/run/initpipe"	/* FIFO to send pids to init */
72 #define	UPIPE		"/var/run/utmppipe"	/* FIFO to send pids to utmpd */
73 
74 #define	VAR_UTMPX_FILE	"/var/adm/utmpx" /* for sanity check only */
75 
76 
77 /*
78  * format of message sent to init
79  */
80 
81 typedef struct	pidrec {
82 	int	pd_type;	/* command type */
83 	pid_t	pd_pid;		/* pid */
84 } pidrec_t;
85 
86 /*
87  * pd_type's
88  */
89 #define	ADDPID 1	/* add a pid to "godchild" list */
90 #define	REMPID 2	/* remove a pid to "godchild" list */
91 
92 static void	utmpx_frec2api(const struct futmpx *, struct utmpx *);
93 static void	utmpx_api2frec(const struct utmpx *, struct futmpx *);
94 
95 static void	unlockutx(void);
96 static void	sendpid(int, pid_t);
97 static void	sendupid(int, pid_t);
98 static int	idcmp(const char *, const char *);
99 static int	allocid(char *, unsigned char *);
100 static int	lockutx(void);
101 
102 static struct utmpx *invoke_utmp_update(const struct utmpx *);
103 static struct futmpx *getoneutx(off_t *);
104 static void	putoneutx(const struct utmpx *, off_t);
105 static int	big_pids_in_use(void);
106 
107 /*
108  * prototypes for utmp compatibility routines (in getut.c)
109  */
110 extern struct utmp *_compat_getutent(void);
111 extern struct utmp *_compat_getutid(const struct utmp *);
112 extern struct utmp *_compat_getutline(const struct utmp *);
113 extern struct utmp *_compat_pututline(const struct utmp *);
114 extern void _compat_setutent(void);
115 extern void _compat_endutent(void);
116 extern void _compat_updwtmp(const char *, struct utmp *);
117 extern struct utmp *_compat_makeut(struct utmp *);
118 
119 static int fd = -1;	/* File descriptor for the utmpx file. */
120 static int ut_got_maxpid = 0;	/* Flag set when sysconf(_SC_MAXPID) called */
121 static pid_t ut_maxpid = 0;	/* Value of MAXPID from sysconf */
122 static int tempfd = -1;  /* To store fd between lockutx() and unlockutx() */
123 
124 static	FILE	*fp = NULL;	/* Buffered file descriptior for utmpx file */
125 static int changed_name = 0;	/* Flag set when not using utmpx file */
126 static char utmpxfile[MAXFILE+1] = UTMPX_FILE;	/* Name of the current */
127 char _compat_utmpfile[MAXFILE+1];
128 static int compat_utmpflag = 0;	/* old compat mode flag */
129 
130 static struct futmpx fubuf;	/* Copy of last entry read in. */
131 static struct utmpx ubuf;	/* Last entry returned to client */
132 
133 static struct utmp utmpcompat;	/* Buffer for returning utmp-format data */
134 /*
135  * In the 64-bit world, the utmpx data structure grows because of
136  * the ut_time field (a struct timeval) grows in the middle of it.
137  */
138 static void
139 utmpx_frec2api(const struct futmpx *src, struct utmpx *dst)
140 {
141 	if (src == NULL)
142 		return;
143 
144 	(void) strncpy(dst->ut_user, src->ut_user, sizeof (dst->ut_user));
145 	(void) strncpy(dst->ut_line, src->ut_line, sizeof (dst->ut_line));
146 	(void) memcpy(dst->ut_id, src->ut_id, sizeof (dst->ut_id));
147 	dst->ut_pid = src->ut_pid;
148 	dst->ut_type = src->ut_type;
149 	dst->ut_exit.e_termination = src->ut_exit.e_termination;
150 	dst->ut_exit.e_exit = src->ut_exit.e_exit;
151 	dst->ut_tv.tv_sec = (time_t)src->ut_tv.tv_sec;
152 	dst->ut_tv.tv_usec = (suseconds_t)src->ut_tv.tv_usec;
153 	dst->ut_session = src->ut_session;
154 	bzero(dst->pad, sizeof (dst->pad));
155 	dst->ut_syslen = src->ut_syslen;
156 	(void) memcpy(dst->ut_host, src->ut_host, sizeof (dst->ut_host));
157 }
158 
159 static void
160 utmpx_api2frec(const struct utmpx *src, struct futmpx *dst)
161 {
162 	if (src == NULL)
163 		return;
164 
165 	(void) strncpy(dst->ut_user, src->ut_user, sizeof (dst->ut_user));
166 	(void) strncpy(dst->ut_line, src->ut_line, sizeof (dst->ut_line));
167 	(void) memcpy(dst->ut_id, src->ut_id, sizeof (dst->ut_id));
168 	dst->ut_pid = src->ut_pid;
169 	dst->ut_type = src->ut_type;
170 	dst->ut_exit.e_termination = src->ut_exit.e_termination;
171 	dst->ut_exit.e_exit = src->ut_exit.e_exit;
172 	dst->ut_tv.tv_sec = (time32_t)src->ut_tv.tv_sec;
173 	dst->ut_tv.tv_usec = (int32_t)src->ut_tv.tv_usec;
174 	dst->ut_session = src->ut_session;
175 	bzero(dst->pad, sizeof (dst->pad));
176 	dst->ut_syslen = src->ut_syslen;
177 	(void) memcpy(dst->ut_host, src->ut_host, sizeof (dst->ut_host));
178 }
179 
180 /*
181  * "getutxent_frec" gets the raw version of the next entry in the utmpx file.
182  */
183 static struct futmpx *
184 getutxent_frec(void)
185 {
186 	/*
187 	 * If the "utmpx" file is not open, attempt to open it for
188 	 * reading.  If there is no file, attempt to create one.  If
189 	 * both attempts fail, return NULL.  If the file exists, but
190 	 * isn't readable and writeable, do not attempt to create.
191 	 */
192 	if (fd < 0) {
193 
194 		if ((fd = open(utmpxfile, O_RDWR|O_CREAT, 0644)) < 0) {
195 
196 			/*
197 			 * If the open failed for permissions, try opening
198 			 * it only for reading.  All "pututxline()" later
199 			 * will fail the writes.
200 			 */
201 
202 			if ((fd = open(utmpxfile, O_RDONLY)) < 0)
203 				return (NULL);
204 
205 			if ((fp = fopen(utmpxfile, "rF")) == NULL) {
206 				(void) close(fd);
207 				fd = -1;
208 				return (NULL);
209 			}
210 
211 		} else {
212 			/*
213 			 * Get the stream pointer
214 			 */
215 			if ((fp = fopen(utmpxfile, "r+F")) == NULL) {
216 				(void) close(fd);
217 				fd = -1;
218 				return (NULL);
219 			}
220 		}
221 	}
222 
223 	/*
224 	 * Try to read in the next entry from the utmpx file.
225 	 */
226 	if (fread(&fubuf, sizeof (fubuf), 1, fp) != 1) {
227 		/*
228 		 * Make sure fubuf is zeroed.
229 		 */
230 		bzero(&fubuf, sizeof (fubuf));
231 		return (NULL);
232 	}
233 
234 	return (&fubuf);
235 }
236 
237 /*
238  * "big_pids_in_use" determines whether large pid numbers are in use
239  * or not.  If MAXPID won't fit in a signed short, the utmp.ut_pid
240  * field will overflow.
241  *
242  * Returns 0 if small pids are in use, 1 otherwise
243  */
244 static int
245 big_pids_in_use(void)
246 {
247 	if (!ut_got_maxpid) {
248 		ut_got_maxpid++;
249 		ut_maxpid = sysconf(_SC_MAXPID);
250 	}
251 	return (ut_maxpid > SHRT_MAX ? 1 : 0);
252 }
253 
254 /*
255  * "getutxent" gets the next entry in the utmpx file.
256  */
257 struct utmpx *
258 getutxent(void)
259 {
260 	struct futmpx *futxp;
261 
262 	futxp = getutxent_frec();
263 	utmpx_frec2api(&fubuf, &ubuf);
264 	if (futxp == NULL)
265 		return (NULL);
266 	return (&ubuf);
267 }
268 /*
269  * "getutent" gets the next entry in the utmp file.
270  */
271 struct utmp *
272 getutent(void)
273 {
274 	struct utmpx *utmpx;
275 
276 	if (compat_utmpflag)
277 		return (_compat_getutent());
278 
279 	/* fail if we can't represent maxpid properly */
280 	if (big_pids_in_use()) {
281 		errno = EOVERFLOW;
282 		return (NULL);
283 	}
284 
285 	if ((utmpx = getutxent()) == NULL)
286 		return (NULL);
287 
288 	getutmp(utmpx, &utmpcompat);
289 	return (&utmpcompat);
290 }
291 
292 /*
293  * "getutxid" finds the specified entry in the utmpx file.  If
294  * it can't find it, it returns NULL.
295  */
296 struct utmpx *
297 getutxid(const struct utmpx *entry)
298 {
299 	short type;
300 
301 	/*
302 	 * From XPG5: "The getutxid() or getutxline() may cache data.
303 	 * For this reason, to use getutxline() to search for multiple
304 	 * occurrences, it is necessary to zero out the static data after
305 	 * each success, or getutxline() could just return a pointer to
306 	 * the same utmpx structure over and over again."
307 	 */
308 	utmpx_api2frec(&ubuf, &fubuf);
309 
310 	/*
311 	 * Start looking for entry. Look in our current buffer before
312 	 * reading in new entries.
313 	 */
314 	do {
315 		/*
316 		 * If there is no entry in "fubuf", skip to the read.
317 		 */
318 		if (fubuf.ut_type != EMPTY) {
319 			switch (entry->ut_type) {
320 
321 			/*
322 			 * Do not look for an entry if the user sent
323 			 * us an EMPTY entry.
324 			 */
325 			case EMPTY:
326 				return (NULL);
327 
328 			/*
329 			 * For RUN_LVL, BOOT_TIME, OLD_TIME, and NEW_TIME
330 			 * entries, only the types have to match.  If they do,
331 			 * return the address of internal buffer.
332 			 */
333 			case RUN_LVL:
334 			case BOOT_TIME:
335 			case DOWN_TIME:
336 			case OLD_TIME:
337 			case NEW_TIME:
338 				if (entry->ut_type == fubuf.ut_type) {
339 					utmpx_frec2api(&fubuf, &ubuf);
340 					return (&ubuf);
341 				}
342 				break;
343 
344 			/*
345 			 * For INIT_PROCESS, LOGIN_PROCESS, USER_PROCESS,
346 			 * and DEAD_PROCESS the type of the entry in "fubuf",
347 			 * must be one of the above and id's must match.
348 			 */
349 			case INIT_PROCESS:
350 			case LOGIN_PROCESS:
351 			case USER_PROCESS:
352 			case DEAD_PROCESS:
353 				if (((type = fubuf.ut_type) == INIT_PROCESS ||
354 				    type == LOGIN_PROCESS ||
355 				    type == USER_PROCESS ||
356 				    type == DEAD_PROCESS) &&
357 				    (fubuf.ut_id[0] == entry->ut_id[0]) &&
358 				    (fubuf.ut_id[1] == entry->ut_id[1]) &&
359 				    (fubuf.ut_id[2] == entry->ut_id[2]) &&
360 				    (fubuf.ut_id[3] == entry->ut_id[3])) {
361 					utmpx_frec2api(&fubuf, &ubuf);
362 					return (&ubuf);
363 				}
364 				break;
365 
366 			/*
367 			 * Do not search for illegal types of entry.
368 			 */
369 			default:
370 				return (NULL);
371 			}
372 		}
373 	} while (getutxent_frec() != NULL);
374 
375 	/*
376 	 * Return NULL since the proper entry wasn't found.
377 	 */
378 	utmpx_frec2api(&fubuf, &ubuf);
379 	return (NULL);
380 }
381 
382 /*
383  * "getutid" finds the specified entry in the utmp file.  If
384  * it can't find it, it returns NULL.
385  */
386 struct utmp *
387 getutid(const struct utmp *entry)
388 {
389 	struct utmpx utmpx;
390 	struct utmpx *utmpx2;
391 
392 	if (compat_utmpflag)
393 		return (_compat_getutid(entry));
394 
395 	/* fail if we can't represent maxpid properly */
396 	if (big_pids_in_use()) {
397 		errno = EOVERFLOW;
398 		return (NULL);
399 	}
400 	getutmpx(entry, &utmpx);
401 	if ((utmpx2 = getutxid(&utmpx)) == NULL)
402 		return (NULL);
403 	getutmp(utmpx2, &utmpcompat);
404 	return (&utmpcompat);
405 }
406 
407 /*
408  * "getutxline" searches the "utmpx" file for a LOGIN_PROCESS or
409  * USER_PROCESS with the same "line" as the specified "entry".
410  */
411 struct utmpx *
412 getutxline(const struct utmpx *entry)
413 {
414 	/*
415 	 * From XPG5: "The getutxid() or getutxline() may cache data.
416 	 * For this reason, to use getutxline() to search for multiple
417 	 * occurrences, it is necessary to zero out the static data after
418 	 * each success, or getutxline() could just return a pointer to
419 	 * the same utmpx structure over and over again."
420 	 */
421 	utmpx_api2frec(&ubuf, &fubuf);
422 
423 	do {
424 		/*
425 		 * If the current entry is the one we are interested in,
426 		 * return a pointer to it.
427 		 */
428 		if (fubuf.ut_type != EMPTY &&
429 		    (fubuf.ut_type == LOGIN_PROCESS ||
430 		    fubuf.ut_type == USER_PROCESS) &&
431 		    strncmp(&entry->ut_line[0], &fubuf.ut_line[0],
432 		    sizeof (fubuf.ut_line)) == 0) {
433 			utmpx_frec2api(&fubuf, &ubuf);
434 			return (&ubuf);
435 		}
436 	} while (getutxent_frec() != NULL);
437 
438 	/*
439 	 * Since entry wasn't found, return NULL.
440 	 */
441 	utmpx_frec2api(&fubuf, &ubuf);
442 	return (NULL);
443 }
444 
445 /*
446  * "getutline" searches the "utmp" file for a LOGIN_PROCESS or
447  * USER_PROCESS with the same "line" as the specified "entry".
448  */
449 struct utmp *
450 getutline(const struct utmp *entry)
451 {
452 	struct utmpx utmpx;
453 	struct utmpx *utmpx2;
454 
455 	if (compat_utmpflag)
456 		return (_compat_getutline(entry));
457 
458 	/* fail if we can't represent maxpid properly */
459 	if (big_pids_in_use()) {
460 		errno = EOVERFLOW;
461 		return (NULL);
462 	}
463 	/* call getutxline */
464 	getutmpx(entry, &utmpx);
465 	if ((utmpx2 = getutxline(&utmpx)) == NULL)
466 		return (NULL);
467 	getutmp(utmpx2, &utmpcompat);
468 	return (&utmpcompat);
469 }
470 
471 /*
472  * invoke_utmp_update
473  *
474  * Invokes the utmp_update program which has the privilege to write
475  * to the /etc/utmp file.
476  */
477 
478 #define	UTMP_UPDATE 	"/usr/lib/utmp_update"
479 #define	STRSZ	64	/* Size of char buffer for argument strings */
480 
481 static struct utmpx *
482 invoke_utmp_update(const struct utmpx *entryx)
483 {
484 	extern char **_environ;
485 
486 	posix_spawnattr_t attr;
487 	int status;
488 	int cancel_state;
489 	pid_t child;
490 	pid_t w;
491 	int i;
492 	char user[STRSZ], id[STRSZ], line[STRSZ], pid[STRSZ], type[STRSZ],
493 	    term[STRSZ], exit[STRSZ], time[STRSZ], time_usec[STRSZ],
494 	    session_id[STRSZ], syslen[32];
495 	char pad[sizeof (entryx->pad) * 2 + 1];
496 	char host[sizeof (entryx->ut_host) + 1];
497 	struct utmpx *curx = NULL;
498 	char bin2hex[] = "0123456789ABCDEF";
499 	unsigned char *cp;
500 	char *argvec[15];
501 	int error;
502 
503 	/*
504 	 * Convert the utmp struct to strings for command line arguments.
505 	 */
506 	(void) strncpy(user, entryx->ut_user, sizeof (entryx->ut_user));
507 	user[sizeof (entryx->ut_user)] = '\0';
508 	(void) strncpy(id, entryx->ut_id, sizeof (entryx->ut_id));
509 	id[sizeof (entryx->ut_id)] = '\0';
510 	(void) strncpy(line, entryx->ut_line, sizeof (entryx->ut_line));
511 	line[sizeof (entryx->ut_line)] = '\0';
512 	(void) sprintf(pid, "%d", (int)entryx->ut_pid);
513 	(void) sprintf(type, "%d", entryx->ut_type);
514 	(void) sprintf(term, "%d", entryx->ut_exit.e_termination);
515 	(void) sprintf(exit, "%d", entryx->ut_exit.e_exit);
516 	(void) sprintf(time, "%ld", entryx->ut_tv.tv_sec);
517 	(void) sprintf(time_usec, "%ld", entryx->ut_tv.tv_usec);
518 	(void) sprintf(session_id, "%d", entryx->ut_session);
519 
520 	cp = (unsigned char *)entryx->pad;
521 	for (i = 0; i < sizeof (entryx->pad); ++i) {
522 		pad[i << 1] = bin2hex[(cp[i] >> 4) & 0xF];
523 		pad[(i << 1) + 1] = bin2hex[cp[i] & 0xF];
524 	}
525 	pad[sizeof (pad) - 1] = '\0';
526 
527 	(void) sprintf(syslen, "%d", entryx->ut_syslen);
528 	(void) strlcpy(host, entryx->ut_host, sizeof (host));
529 
530 	argvec[0] = UTMP_UPDATE;
531 	argvec[1] = user;
532 	argvec[2] = id;
533 	argvec[3] = line;
534 	argvec[4] = pid;
535 	argvec[5] = type;
536 	argvec[6] = term;
537 	argvec[7] = exit;
538 	argvec[8] = time;
539 	argvec[9] = time_usec;
540 	argvec[10] = session_id;
541 	argvec[11] = pad;
542 	argvec[12] = syslen;
543 	argvec[13] = host;
544 	argvec[14] = NULL;
545 
546 	/*
547 	 * No SIGCHLD, please, and let no one else reap our child.
548 	 */
549 	error = posix_spawnattr_init(&attr);
550 	if (error) {
551 		errno = error;
552 		goto out;
553 	}
554 	error = posix_spawnattr_setflags(&attr,
555 	    POSIX_SPAWN_NOSIGCHLD_NP | POSIX_SPAWN_WAITPID_NP);
556 	if (error) {
557 		(void) posix_spawnattr_destroy(&attr);
558 		errno = error;
559 		goto out;
560 	}
561 	error = posix_spawn(&child, UTMP_UPDATE, NULL, &attr, argvec, _environ);
562 	(void) posix_spawnattr_destroy(&attr);
563 	if (error) {
564 		errno = error;
565 		goto out;
566 	}
567 
568 	(void) pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, &cancel_state);
569 	do {
570 		w = waitpid(child, &status, 0);
571 	} while (w == -1 && errno == EINTR);
572 	(void) pthread_setcancelstate(cancel_state, NULL);
573 
574 	/*
575 	 * We can get ECHILD if the process is ignoring SIGCLD.
576 	 */
577 	if (!(w == -1 && errno == ECHILD) &&
578 	    (w == -1 || !WIFEXITED(status) || WEXITSTATUS(status) != 0)) {
579 		/*
580 		 * The child encountered an error,
581 		 */
582 		goto out;
583 	}
584 
585 	/*
586 	 * Normal termination.  Return a pointer to the entry we just made.
587 	 */
588 	setutxent();	/* Reset file pointer */
589 
590 	while ((curx = getutxent()) != NULL) {
591 		if (curx->ut_type != EMPTY &&
592 		    (curx->ut_type == LOGIN_PROCESS ||
593 		    curx->ut_type == USER_PROCESS ||
594 		    curx->ut_type == DEAD_PROCESS) &&
595 		    strncmp(&entryx->ut_line[0], &curx->ut_line[0],
596 		    sizeof (curx->ut_line)) == 0)
597 			break;
598 	}
599 
600 out:
601 	return (curx);
602 }
603 
604 /*
605  * "pututxline" writes the structure sent into the utmpx file.
606  * If there is already an entry with the same id, then it is
607  * overwritten, otherwise a new entry is made at the end of the
608  * utmpx file.
609  */
610 
611 struct utmpx *
612 pututxline(const struct utmpx *entry)
613 {
614 	struct utmpx *answer;
615 	int lock = 0;
616 	struct utmpx tmpxbuf;
617 	struct futmpx ftmpxbuf;
618 
619 	/*
620 	 * Copy the user supplied entry into our temporary buffer to
621 	 * avoid the possibility that the user is actually passing us
622 	 * the address of "ubuf".
623 	 */
624 	if (entry == NULL)
625 		return (NULL);
626 
627 	(void) memcpy(&tmpxbuf, entry, sizeof (tmpxbuf));
628 	utmpx_api2frec(entry, &ftmpxbuf);
629 
630 	if (fd < 0) {
631 		(void) getutxent_frec();
632 		if (fd < 0)
633 			return ((struct utmpx *)NULL);
634 	}
635 
636 	/*
637 	 * If we are not the superuser than we can't write to /etc/utmp,
638 	 * so invoke update_utmp(8) to write the entry for us.
639 	 */
640 	if (changed_name == 0 && geteuid() != 0)
641 		return (invoke_utmp_update(entry));
642 
643 	/*
644 	 * Find the proper entry in the utmpx file.  Start at the current
645 	 * location.  If it isn't found from here to the end of the
646 	 * file, then reset to the beginning of the file and try again.
647 	 * If it still isn't found, then write a new entry at the end of
648 	 * the file.  (Making sure the location is an integral number of
649 	 * utmp structures into the file incase the file is scribbled.)
650 	 */
651 
652 	if (getutxid(&tmpxbuf) == NULL) {
653 
654 		setutxent();
655 
656 		/*
657 		 * Lock the the entire file from here onwards.
658 		 */
659 		if (getutxid(&tmpxbuf) == NULL) {
660 			lock++;
661 			if (lockf(fd, F_LOCK, 0) < NULL)
662 				return (NULL);
663 			(void) fseek(fp, 0, SEEK_END);
664 		} else
665 			(void) fseek(fp, -(long)sizeof (struct futmpx),
666 			    SEEK_CUR);
667 	} else
668 		(void) fseek(fp, -(long)sizeof (struct futmpx), SEEK_CUR);
669 
670 	/*
671 	 * Write out the user supplied structure.  If the write fails,
672 	 * then the user probably doesn't have permission to write the
673 	 * utmpx file.
674 	 */
675 	if (fwrite(&ftmpxbuf, sizeof (ftmpxbuf), 1, fp) != 1) {
676 		answer = (struct utmpx *)NULL;
677 	} else {
678 		/*
679 		 * Save the new user structure into ubuf and fubuf so that
680 		 * it will be up to date in the future.
681 		 */
682 		(void) fflush(fp);
683 		(void) memcpy(&fubuf, &ftmpxbuf, sizeof (fubuf));
684 		utmpx_frec2api(&fubuf, &ubuf);
685 		answer = &ubuf;
686 	}
687 
688 	if (lock)
689 		(void) lockf(fd, F_ULOCK, 0);
690 
691 	if (answer != NULL && (tmpxbuf.ut_type == USER_PROCESS ||
692 	    tmpxbuf.ut_type == DEAD_PROCESS))
693 		sendupid(tmpxbuf.ut_type == USER_PROCESS ? ADDPID : REMPID,
694 		    (pid_t)tmpxbuf.ut_pid);
695 	return (answer);
696 }
697 /*
698  * "pututline" is a wrapper that calls pututxline after converting
699  * the utmp record to a utmpx record.
700  */
701 struct utmp *
702 pututline(const struct utmp *entry)
703 {
704 	struct utmpx utmpx;
705 	struct utmpx *utmpx2;
706 
707 	if (compat_utmpflag)
708 		return (_compat_pututline(entry));
709 
710 	getutmpx(entry, &utmpx);
711 	if ((utmpx2 = pututxline(&utmpx)) == NULL)
712 		return (NULL);
713 	getutmp(utmpx2, &utmpcompat);
714 	return (&utmpcompat);
715 }
716 
717 /*
718  * "setutxent" just resets the utmpx file back to the beginning.
719  */
720 void
721 setutxent(void)
722 {
723 	if (fd != -1)
724 		(void) lseek(fd, 0L, SEEK_SET);
725 
726 	if (fp != NULL)
727 		(void) fseek(fp, 0L, SEEK_SET);
728 
729 	/*
730 	 * Zero the stored copy of the last entry read, since we are
731 	 * resetting to the beginning of the file.
732 	 */
733 	bzero(&ubuf, sizeof (ubuf));
734 	bzero(&fubuf, sizeof (fubuf));
735 }
736 
737 /*
738  * "setutent" is a wrapper that calls setutxent
739  */
740 void
741 setutent(void)
742 {
743 	if (compat_utmpflag) {
744 		_compat_setutent();
745 		return;
746 	}
747 
748 	setutxent();
749 }
750 
751 /*
752  * "endutxent" closes the utmpx file.
753  */
754 void
755 endutxent(void)
756 {
757 	if (fd != -1)
758 		(void) close(fd);
759 	fd = -1;
760 
761 	if (fp != NULL)
762 		(void) fclose(fp);
763 	fp = NULL;
764 
765 	bzero(&ubuf, sizeof (ubuf));
766 	bzero(&fubuf, sizeof (fubuf));
767 }
768 
769 /*
770  * "endutent" is a wrapper that calls endutxent
771  * and clears the utmp compatibility buffer.
772  */
773 void
774 endutent(void)
775 {
776 	if (compat_utmpflag) {
777 		_compat_endutent();
778 		return;
779 	}
780 
781 	endutxent();
782 	bzero(&utmpcompat, sizeof (utmpcompat));
783 }
784 
785 /*
786  * "utmpxname" allows the user to read a file other than the
787  * normal "utmpx" file.
788  */
789 int
790 utmpxname(const char *newfile)
791 {
792 	size_t len;
793 
794 	/*
795 	 * Determine if the new filename will fit.  If not, return 0.
796 	 */
797 	if ((len = strlen(newfile)) > MAXFILE-1)
798 		return (0);
799 
800 	/*
801 	 * The name of the utmpx file has to end with 'x'
802 	 */
803 	if (newfile[len-1] != 'x')
804 		return (0);
805 
806 	/*
807 	 * Otherwise copy in the new file name.
808 	 */
809 	else
810 		(void) strcpy(&utmpxfile[0], newfile);
811 	/*
812 	 * Make sure everything is reset to the beginning state.
813 	 */
814 	endutxent();
815 
816 	/*
817 	 * If the file is being changed to /etc/utmpx or /var/adm/utmpx then
818 	 * we clear the flag so pututxline invokes utmp_update.  Otherwise
819 	 * we set the flag indicating that they changed to another name.
820 	 */
821 	if (strcmp(utmpxfile, UTMPX_FILE) == 0 ||
822 	    strcmp(utmpxfile, VAR_UTMPX_FILE) == 0)
823 		changed_name = 0;
824 	else
825 		changed_name = 1;
826 
827 	return (1);
828 }
829 
830 /*
831  * "utmpname" allows the user to read a file other than the
832  * normal "utmp" file. If the file specified is "/var/adm/utmp"
833  * or "/var/adm/wtmp", it is translated to the corresponding "utmpx"
834  * format name, and all "utmp" operations become wrapped calls
835  * to the equivalent "utmpx" routines, with data conversions
836  * as appropriate.  In the event the application wishes to read
837  * an actual "old" utmp file (named something other than /var/adm/utmp),
838  * calling this function with that name enables backward compatibility
839  * mode, where we actually call the old utmp routines to operate on
840  * the old file.
841  */
842 int
843 utmpname(const char *newfile)
844 {
845 	char name[MAXFILE+1];
846 
847 	if (strlen(newfile) > MAXFILE)
848 		return (0);
849 
850 	if (strcmp(newfile, "/var/adm/utmp") == 0 ||
851 	    strcmp(newfile, "/var/adm/wtmp") == 0) {
852 		(void) strcpy(name, newfile);
853 		(void) strcat(name, "x");
854 		compat_utmpflag = 0;	/* turn off old compat mode */
855 		return (utmpxname(name));
856 	} else {
857 		(void) strcpy(_compat_utmpfile, newfile);
858 		compat_utmpflag = 1;
859 		return (1);
860 	}
861 }
862 
863 /*
864  * Add the record to wtmpx.
865  */
866 void
867 updwtmpx(const char *filex, struct utmpx *utx)
868 {
869 	struct futmpx futx;
870 	int wfdx;
871 
872 	if ((wfdx = open(filex, O_WRONLY | O_APPEND)) < 0)
873 		return;
874 
875 	(void) lseek(wfdx, 0, SEEK_END);
876 
877 	utmpx_api2frec(utx, &futx);
878 	(void) write(wfdx, &futx, sizeof (futx));
879 
880 done:
881 	(void) close(wfdx);
882 }
883 
884 /*
885  * Add record to wtmp (actually wtmpx). If not updating /var/adm/wtmp,
886  * use the old utmp compatibility routine to write a utmp-format
887  * record to the file specified.
888  */
889 void
890 updwtmp(const char *file, struct utmp *ut)
891 {
892 	struct utmpx utmpx;
893 	char xfile[MAXFILE + 1];
894 
895 	if (strcmp(file, "/var/adm/wtmp") == 0) {
896 		(void) strlcpy(xfile, file, sizeof (xfile) - 1);
897 		(void) strcat(xfile, "x");
898 		getutmpx(ut, &utmpx);
899 		updwtmpx((const char *)&xfile, &utmpx);
900 	} else
901 		_compat_updwtmp(file, ut);
902 }
903 
904 /*
905  * modutx - modify a utmpx entry.  Also notify init about new pids or
906  *	old pids that it no longer needs to care about
907  *
908  *	args:	utp- point to utmpx structure to be created
909  */
910 struct utmpx *
911 modutx(const struct utmpx *utp)
912 {
913 	int i;
914 	struct utmpx utmp;		/* holding area */
915 	struct utmpx *ucp = &utmp;	/* and a pointer to it */
916 	struct utmpx *up;		/* "current" utmpx entry */
917 	struct futmpx *fup;		/* being examined */
918 
919 	for (i = 0; i < IDLEN; ++i) {
920 		if ((unsigned char)utp->ut_id[i] == SC_WILDC)
921 			return (NULL);
922 	}
923 
924 	/*
925 	 * copy the supplied utmpx structure someplace safe
926 	 */
927 	(void) memcpy(&utmp, utp, sizeof (utmp));
928 	setutxent();
929 	while (fup = getutxent_frec()) {
930 		if (idcmp(ucp->ut_id, fup->ut_id))
931 			continue;
932 
933 		/*
934 		 * only get here if ids are the same, i.e. found right entry
935 		 */
936 		if (ucp->ut_pid != fup->ut_pid) {
937 			sendpid(REMPID, (pid_t)fup->ut_pid);
938 			sendpid(ADDPID, (pid_t)ucp->ut_pid);
939 		}
940 		break;
941 	}
942 	up = pututxline(ucp);
943 	if (ucp->ut_type == DEAD_PROCESS)
944 		sendpid(REMPID, (pid_t)ucp->ut_pid);
945 	if (up)
946 		updwtmpx(WTMPX_FILE, up);
947 	endutxent();
948 	return (up);
949 }
950 
951 /*
952  * modut - modify a utmp entry.	 Also notify init about new pids or
953  *	old pids that it no longer needs to care about
954  *
955  *	args:	utmp - point to utmp structure to be created
956  */
957 struct utmp *
958 modut(struct utmp *utp)
959 {
960 	struct utmpx utmpx;
961 	struct utmpx *utmpx2;
962 
963 	getutmpx(utp, &utmpx);
964 	if ((utmpx2 = modutx(&utmpx)) == NULL)
965 		return (NULL);
966 
967 	getutmp(utmpx2, utp);
968 	return (utp);
969 }
970 
971 /*
972  * idcmp - compare two id strings, return  0 if same, non-zero if not *
973  *	args:	s1 - first id string
974  *		s2 - second id string
975  */
976 static int
977 idcmp(const char *s1, const char *s2)
978 {
979 	int i;
980 
981 	for (i = 0; i < IDLEN; ++i)
982 		if ((unsigned char) *s1 != SC_WILDC && (*s1++ != *s2++))
983 			return (-1);
984 	return (0);
985 }
986 
987 
988 /*
989  * allocid - allocate an unused id for utmp, either by recycling a
990  *	DEAD_PROCESS entry or creating a new one.  This routine only
991  *	gets called if a wild card character was specified.
992  *
993  *	args:	srcid - pattern for new id
994  *		saveid - last id matching pattern for a non-dead process
995  */
996 static int
997 allocid(char *srcid, unsigned char *saveid)
998 {
999 	int i;		/* scratch variable */
1000 	int changed;		/* flag to indicate that a new id has */
1001 				/* been generated */
1002 	char copyid[IDLEN];	/* work area */
1003 
1004 	(void) memcpy(copyid, srcid, IDLEN);
1005 	changed = 0;
1006 	for (i = 0; i < IDLEN; ++i) {
1007 
1008 		/*
1009 		 * if this character isn't wild, it'll be part of the
1010 		 * generated id
1011 		 */
1012 		if ((unsigned char) copyid[i] != SC_WILDC)
1013 			continue;
1014 
1015 		/*
1016 		 * it's a wild character, retrieve the character from the
1017 		 * saved id
1018 		 */
1019 		copyid[i] = saveid[i];
1020 
1021 		/*
1022 		 * if we haven't changed anything yet, try to find a new char
1023 		 * to use
1024 		 */
1025 		if (!changed && (saveid[i] < MAXVAL)) {
1026 
1027 		/*
1028 		 * Note: this algorithm is taking the "last matched" id
1029 		 * and trying to make a 1 character change to it to create
1030 		 * a new one.  Rather than special-case the first time
1031 		 * (when no perturbation is really necessary), just don't
1032 		 * allocate the first valid id.
1033 		 */
1034 
1035 			while (++saveid[i] < MAXVAL) {
1036 				/*
1037 				 * make sure new char is alphanumeric
1038 				 */
1039 				if (isalnum(saveid[i])) {
1040 					copyid[i] = saveid[i];
1041 					changed = 1;
1042 					break;
1043 				}
1044 			}
1045 
1046 			if (!changed) {
1047 				/*
1048 				 * Then 'reset' the current count at
1049 				 * this position to it's lowest valid
1050 				 * value, and propagate the carry to
1051 				 * the next wild-card slot
1052 				 *
1053 				 * See 1113208.
1054 				 */
1055 				saveid[i] = 0;
1056 				while (!isalnum(saveid[i]))
1057 				saveid[i]++;
1058 				copyid[i] = ++saveid[i];
1059 			}
1060 		}
1061 	}
1062 	/*
1063 	 * changed is true if we were successful in allocating an id
1064 	 */
1065 	if (changed) {
1066 		(void) memcpy(srcid, copyid, IDLEN);
1067 		return (0);
1068 	} else {
1069 		return (-1);
1070 	}
1071 }
1072 
1073 
1074 /*
1075  * lockutx - lock utmpx file
1076  */
1077 static int
1078 lockutx(void)
1079 {
1080 	int lockfd;
1081 
1082 	if ((lockfd = open(UTMPX_FILE, O_RDWR|O_CREAT, 0644)) < 0)
1083 		return (-1);
1084 
1085 	if (lockf(lockfd, F_LOCK, 0) < 0) {
1086 		(void) close(lockfd);
1087 		return (-1);
1088 	}
1089 
1090 	tempfd = fd;
1091 	fd = lockfd;
1092 
1093 	return (0);
1094 
1095 }
1096 
1097 
1098 
1099 /*
1100  * unlockutx - unlock utmpx file
1101  */
1102 static void
1103 unlockutx(void)
1104 {
1105 	(void) lockf(fd, F_ULOCK, 0);
1106 	(void) close(fd);
1107 	fd = tempfd;
1108 }
1109 
1110 
1111 /*
1112  * sendpid - send message to init to add or remove a pid from the
1113  *	"godchild" list
1114  *
1115  *	args:	cmd - ADDPID or REMPID
1116  *		pid - pid of "godchild"
1117  */
1118 static void
1119 sendpid(int cmd, pid_t pid)
1120 {
1121 	int pfd;		/* file desc. for init pipe */
1122 	pidrec_t prec;		/* place for message to be built */
1123 
1124 	/*
1125 	 * if for some reason init didn't open initpipe, open it read/write
1126 	 * here to avoid sending SIGPIPE to the calling process
1127 	 */
1128 	pfd = open(IPIPE, O_RDWR);
1129 	if (pfd < 0)
1130 		return;
1131 	prec.pd_pid = pid;
1132 	prec.pd_type = cmd;
1133 	(void) write(pfd, &prec, sizeof (pidrec_t));
1134 	(void) close(pfd);
1135 }
1136 
1137 /*
1138  * makeutx - create a utmpx entry, recycling an id if a wild card is
1139  *	specified.  Also notify init about the new pid
1140  *
1141  *	args:	utmpx - point to utmpx structure to be created
1142  */
1143 
1144 struct utmpx *
1145 makeutx(const struct utmpx *utmp)
1146 {
1147 	struct utmpx *utp;
1148 	struct futmpx *ut;		/* "current" utmpx being examined */
1149 	unsigned char saveid[IDLEN];	/* the last id we matched that was */
1150 					/* NOT a dead proc */
1151 	int falphanum = 0x30;		/* first alpha num char */
1152 	off_t offset;
1153 
1154 	/*
1155 	 * Are any wild card char's present in the idlen string?
1156 	 */
1157 	if (memchr(utmp->ut_id, SC_WILDC, IDLEN) != NULL) {
1158 		/*
1159 		 * try to lock the utmpx file, only needed if
1160 		 * we're doing wildcard matching
1161 		 */
1162 		if (lockutx())
1163 			return (NULL);
1164 
1165 		/*
1166 		 * used in allocid
1167 		 */
1168 		(void) memset(saveid, falphanum, IDLEN);
1169 
1170 		while (ut = getoneutx(&offset))
1171 			if (idcmp(utmp->ut_id, ut->ut_id)) {
1172 				continue;
1173 			} else {
1174 				/*
1175 				 * Found a match. We are done if this is
1176 				 * a free slot. Else record this id. We
1177 				 * will need it to generate the next new id.
1178 				 */
1179 				if (ut->ut_type == DEAD_PROCESS)
1180 					break;
1181 				else
1182 					(void) memcpy(saveid, ut->ut_id,
1183 					    IDLEN);
1184 			}
1185 
1186 		if (ut) {
1187 
1188 			/*
1189 			 * Unused entry, reuse it. We know the offset. So
1190 			 * just go to that offset  utmpx and write it out.
1191 			 */
1192 			(void) memcpy((caddr_t)utmp->ut_id, ut->ut_id, IDLEN);
1193 
1194 			putoneutx(utmp, offset);
1195 			updwtmpx(WTMPX_FILE, (struct utmpx *)utmp);
1196 			unlockutx();
1197 			sendpid(ADDPID, (pid_t)utmp->ut_pid);
1198 			return ((struct utmpx *)utmp);
1199 		} else {
1200 			/*
1201 			 * nothing available, allocate an id and
1202 			 * write it out at the end.
1203 			 */
1204 
1205 			if (allocid((char *)utmp->ut_id, saveid)) {
1206 				unlockutx();
1207 				return (NULL);
1208 			} else {
1209 				/*
1210 				 * Seek to end and write out the entry
1211 				 * and also update the utmpx file.
1212 				 */
1213 				(void) lseek(fd, 0L, SEEK_END);
1214 				offset = lseek(fd, 0L, SEEK_CUR);
1215 
1216 				putoneutx(utmp, offset);
1217 				updwtmpx(WTMPX_FILE, (struct utmpx *)utmp);
1218 				unlockutx();
1219 				sendpid(ADDPID, (pid_t)utmp->ut_pid);
1220 				return ((struct utmpx *)utmp);
1221 			}
1222 		}
1223 	} else {
1224 		utp = pututxline(utmp);
1225 		if (utp)
1226 			updwtmpx(WTMPX_FILE, utp);
1227 		endutxent();
1228 		sendpid(ADDPID, (pid_t)utmp->ut_pid);
1229 		return (utp);
1230 	}
1231 }
1232 
1233 /*
1234  * makeut - create a utmp entry, recycling an id if a wild card is
1235  *	specified.  Also notify init about the new pid
1236  *
1237  *	args:	utmp - point to utmp structure to be created
1238  */
1239 struct utmp *
1240 makeut(struct utmp *utmp)
1241 {
1242 	struct utmpx utmpx;
1243 	struct utmpx *utmpx2;
1244 
1245 	if (compat_utmpflag)
1246 		return (_compat_makeut(utmp));
1247 
1248 	getutmpx(utmp, &utmpx);
1249 	if ((utmpx2 = makeutx(&utmpx)) == NULL)
1250 		return (NULL);
1251 
1252 	getutmp(utmpx2, utmp);
1253 	return (utmp);
1254 }
1255 
1256 
1257 #define	UTMPNBUF	200	/* Approx 8k (FS Block) size */
1258 static struct futmpx	*utmpbuf = NULL;
1259 
1260 /*
1261  * Buffered read routine to get one entry from utmpx file
1262  */
1263 static struct futmpx *
1264 getoneutx(off_t *off)
1265 {
1266 	static	size_t idx = 0;	/* Current index in the utmpbuf */
1267 	static	size_t nidx = 0;	/* Max entries in this utmpbuf */
1268 	static	int nbuf = 0;	/* number of utmpbufs read from disk */
1269 	ssize_t	nbytes, bufsz = sizeof (struct futmpx) * UTMPNBUF;
1270 
1271 	if (utmpbuf == NULL)
1272 		if ((utmpbuf = malloc(bufsz)) == NULL) {
1273 			perror("malloc");
1274 			return (NULL);
1275 		}
1276 
1277 	if (idx == nidx) {
1278 		/*
1279 		 *	We have read all entries in the utmpbuf. Read
1280 		 *	the buffer from the disk.
1281 		 */
1282 		if ((nbytes = read(fd, utmpbuf, bufsz)) < bufsz) {
1283 			/*
1284 			 *	Partial read only. keep count of the
1285 			 *	number of valid entries in the buffer
1286 			 */
1287 			nidx = nbytes / sizeof (struct futmpx);
1288 		} else {
1289 			/*
1290 			 *	We read in the full UTMPNBUF entries
1291 			 *	Great !
1292 			 */
1293 			nidx = UTMPNBUF;
1294 		}
1295 		nbuf++;		/* Number of buf we have read in. */
1296 		idx = 0;	/* reset index within utmpbuf */
1297 	}
1298 
1299 	/*
1300 	 *	Current offset of this buffer in the file
1301 	 */
1302 	*off = (((nbuf - 1) * UTMPNBUF) + idx) * sizeof (struct futmpx);
1303 
1304 	if (idx < nidx) {
1305 		/*
1306 		 *	We still have at least one valid buffer in
1307 		 *	utmpbuf to be passed to the caller.
1308 		 */
1309 		return (&utmpbuf[idx++]);
1310 	}
1311 
1312 	/*
1313 	 *	Reached EOF. Return NULL. Offset is set correctly
1314 	 *	to append at the end of the file
1315 	 */
1316 
1317 	return (NULL);
1318 }
1319 
1320 static void
1321 putoneutx(const struct utmpx *utpx, off_t off)
1322 {
1323 	struct	futmpx futx;
1324 
1325 	utmpx_api2frec(utpx, &futx);
1326 	(void) lseek(fd, off, SEEK_SET);	/* seek in the utmpx file */
1327 	(void) write(fd, &futx, sizeof (futx));
1328 }
1329 
1330 /*
1331  * sendupid - send message to utmpd to add or remove a pid from the
1332  *	list of procs to watch
1333  *
1334  *	args:	cmd - ADDPID or REMPID
1335  *		pid - process ID of process to watch
1336  */
1337 static void
1338 sendupid(int cmd, pid_t pid)
1339 {
1340 	int pfd;		/* file desc. for utmp pipe */
1341 	pidrec_t prec;		/* place for message to be built */
1342 
1343 	/*
1344 	 * if for some reason utmp didn't open utmppipe, open it read/write
1345 	 * here to avoid sending SIGPIPE to the calling process
1346 	 */
1347 
1348 	pfd = open(UPIPE, O_RDWR | O_NONBLOCK | O_NDELAY);
1349 	if (pfd < 0)
1350 		return;
1351 	prec.pd_pid = pid;
1352 	prec.pd_type = cmd;
1353 	(void) write(pfd, &prec, sizeof (pidrec_t));
1354 	(void) close(pfd);
1355 }
1356 
1357 /*
1358  * getutmpx - convert a utmp record into a utmpx record
1359  */
1360 void
1361 getutmpx(const struct utmp *ut, struct utmpx *utx)
1362 {
1363 	(void) memcpy(utx->ut_user, ut->ut_user, sizeof (ut->ut_user));
1364 	(void) bzero(&utx->ut_user[sizeof (ut->ut_user)],
1365 	    sizeof (utx->ut_user) - sizeof (ut->ut_user));
1366 	(void) memcpy(utx->ut_line, ut->ut_line, sizeof (ut->ut_line));
1367 	(void) bzero(&utx->ut_line[sizeof (ut->ut_line)],
1368 	    sizeof (utx->ut_line) - sizeof (ut->ut_line));
1369 	(void) memcpy(utx->ut_id, ut->ut_id, sizeof (ut->ut_id));
1370 	utx->ut_pid = ut->ut_pid;
1371 	utx->ut_type = ut->ut_type;
1372 	utx->ut_exit = ut->ut_exit;
1373 	utx->ut_tv.tv_sec = ut->ut_time;
1374 	utx->ut_tv.tv_usec = 0;
1375 	utx->ut_session = 0;
1376 	bzero(utx->pad, sizeof (utx->pad));
1377 	bzero(utx->ut_host, sizeof (utx->ut_host));
1378 	utx->ut_syslen = 0;
1379 }
1380 
1381 /*
1382  * getutmp - convert a utmpx record into a utmp record
1383  */
1384 void
1385 getutmp(const struct utmpx *utx, struct utmp *ut)
1386 {
1387 	(void) memcpy(ut->ut_user, utx->ut_user, sizeof (ut->ut_user));
1388 	(void) memcpy(ut->ut_line, utx->ut_line, sizeof (ut->ut_line));
1389 	(void) memcpy(ut->ut_id, utx->ut_id, sizeof (utx->ut_id));
1390 	ut->ut_pid = utx->ut_pid;
1391 	ut->ut_type = utx->ut_type;
1392 	ut->ut_exit = utx->ut_exit;
1393 	ut->ut_time = utx->ut_tv.tv_sec;
1394 }
1395