1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #ifndef _LIBTOPO_H 28 #define _LIBTOPO_H 29 30 #include <sys/nvpair.h> 31 #include <stdio.h> 32 #include <libdevinfo.h> 33 34 #ifdef __cplusplus 35 extern "C" { 36 #endif 37 38 #define TOPO_VERSION 1 /* Library ABI Interface Version */ 39 40 typedef struct topo_hdl topo_hdl_t; 41 typedef struct topo_node tnode_t; 42 typedef struct topo_walk topo_walk_t; 43 typedef int32_t topo_instance_t; 44 typedef uint32_t topo_version_t; 45 46 typedef struct topo_list { 47 struct topo_list *l_prev; 48 struct topo_list *l_next; 49 } topo_list_t; 50 51 typedef struct topo_faclist { 52 topo_list_t tf_list; 53 tnode_t *tf_node; 54 } topo_faclist_t; 55 56 /* 57 * The following functions, error codes and data structures are private 58 * to libtopo snapshot consumers and enumerator modules. 59 */ 60 extern topo_hdl_t *topo_open(int, const char *, int *); 61 extern void topo_close(topo_hdl_t *); 62 extern char *topo_snap_hold(topo_hdl_t *, const char *, int *); 63 extern void topo_snap_release(topo_hdl_t *); 64 65 /* 66 * Snapshot walker support 67 */ 68 typedef int (*topo_walk_cb_t)(topo_hdl_t *, tnode_t *, void *); 69 70 extern topo_walk_t *topo_walk_init(topo_hdl_t *, const char *, topo_walk_cb_t, 71 void *, int *); 72 extern int topo_walk_step(topo_walk_t *, int); 73 extern void topo_walk_fini(topo_walk_t *); 74 extern di_node_t topo_hdl_devinfo(topo_hdl_t *); 75 extern di_prom_handle_t topo_hdl_prominfo(topo_hdl_t *); 76 77 /* 78 * Walk status returned from walker 79 */ 80 #define TOPO_WALK_ERR -1 81 #define TOPO_WALK_NEXT 0 82 #define TOPO_WALK_TERMINATE 1 83 84 /* 85 * Types of walks: depth-first (child) or breadth-first (sibling) 86 */ 87 #define TOPO_WALK_CHILD 0x0001 88 #define TOPO_WALK_SIBLING 0x0002 89 90 /* 91 * FMRI helper routines 92 */ 93 extern int topo_fmri_present(topo_hdl_t *, nvlist_t *, int *); 94 extern int topo_fmri_replaced(topo_hdl_t *, nvlist_t *, int *); 95 extern int topo_fmri_contains(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 96 extern int topo_fmri_expand(topo_hdl_t *, nvlist_t *, int *); 97 extern int topo_fmri_unusable(topo_hdl_t *, nvlist_t *, int *); 98 extern int topo_fmri_service_state(topo_hdl_t *, nvlist_t *, int *); 99 extern int topo_fmri_retire(topo_hdl_t *, nvlist_t *, int *); 100 extern int topo_fmri_unretire(topo_hdl_t *, nvlist_t *, int *); 101 extern int topo_fmri_nvl2str(topo_hdl_t *, nvlist_t *, char **, int *); 102 extern int topo_fmri_str2nvl(topo_hdl_t *, const char *, nvlist_t **, int *); 103 extern int topo_fmri_asru(topo_hdl_t *, nvlist_t *, nvlist_t **, int *); 104 extern int topo_fmri_fru(topo_hdl_t *, nvlist_t *, nvlist_t **, 105 int *); 106 extern int topo_fmri_label(topo_hdl_t *, nvlist_t *, char **, int *); 107 extern int topo_fmri_serial(topo_hdl_t *, nvlist_t *, char **, int *); 108 extern int topo_fmri_compare(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 109 extern int topo_fmri_facility(topo_hdl_t *, nvlist_t *, const char *, 110 uint32_t, topo_walk_cb_t, void *, int *); 111 112 /* 113 * Private utility functions for fmd 114 */ 115 extern ulong_t topo_fmri_strhash(topo_hdl_t *, const char *); 116 extern boolean_t topo_fmri_strcmp(topo_hdl_t *, const char *, const char *); 117 118 /* 119 * Topo node utilities: callable from topo_walk_step() callback or module 120 * enumeration, topo_mod_enumerate() 121 */ 122 extern char *topo_node_name(tnode_t *); 123 extern topo_instance_t topo_node_instance(tnode_t *); 124 extern tnode_t *topo_node_parent(tnode_t *); 125 extern void *topo_node_private(tnode_t *); 126 extern int topo_node_flags(tnode_t *); 127 extern int topo_node_asru(tnode_t *, nvlist_t **, nvlist_t *, int *); 128 extern int topo_node_fru(tnode_t *, nvlist_t **, nvlist_t *, int *); 129 extern int topo_node_resource(tnode_t *, nvlist_t **, int *); 130 extern int topo_node_label(tnode_t *, char **, int *); 131 extern tnode_t *topo_node_lookup(tnode_t *, const char *, topo_instance_t); 132 extern int topo_method_invoke(tnode_t *node, const char *, topo_version_t, 133 nvlist_t *, nvlist_t **, int *); 134 extern boolean_t topo_method_supported(tnode_t *, const char *, 135 topo_version_t); 136 extern int topo_node_facility(topo_hdl_t *, tnode_t *, const char *, 137 uint32_t, topo_faclist_t *, int *); 138 139 /* 140 * Node flags: denotes type of node 141 */ 142 #define TOPO_NODE_DEFAULT 0 143 #define TOPO_NODE_FACILITY 1 144 145 #define TOPO_FAC_TYPE_SENSOR "sensor" 146 #define TOPO_FAC_TYPE_INDICATOR "indicator" 147 148 /* 149 * Topo property get functions 150 */ 151 extern int topo_prop_get_int32(tnode_t *, const char *, const char *, 152 int32_t *, int *); 153 extern int topo_prop_get_uint32(tnode_t *, const char *, const char *, 154 uint32_t *, int *); 155 extern int topo_prop_get_int64(tnode_t *, const char *, const char *, 156 int64_t *, int *); 157 extern int topo_prop_get_uint64(tnode_t *, const char *, const char *, 158 uint64_t *, int *); 159 extern int topo_prop_get_double(tnode_t *, const char *, const char *, 160 double *, int *); 161 extern int topo_prop_get_string(tnode_t *, const char *, const char *, 162 char **, int *); 163 extern int topo_prop_get_fmri(tnode_t *, const char *, const char *, 164 nvlist_t **, int *); 165 extern int topo_prop_get_int32_array(tnode_t *, const char *, const char *, 166 int32_t **, uint_t *, int *); 167 extern int topo_prop_get_uint32_array(tnode_t *, const char *, const char *, 168 uint32_t **, uint_t *, int *); 169 extern int topo_prop_get_int64_array(tnode_t *, const char *, const char *, 170 int64_t **, uint_t *, int *); 171 extern int topo_prop_get_uint64_array(tnode_t *, const char *, const char *, 172 uint64_t **, uint_t *, int *); 173 extern int topo_prop_get_string_array(tnode_t *, const char *, const char *, 174 char ***, uint_t *, int *); 175 extern int topo_prop_get_fmri_array(tnode_t *, const char *, const char *, 176 nvlist_t ***, uint_t *, int *); 177 178 /* 179 * Topo property set functions 180 */ 181 extern int topo_prop_set_int32(tnode_t *, const char *, const char *, int, 182 int32_t, int *); 183 extern int topo_prop_set_uint32(tnode_t *, const char *, const char *, int, 184 uint32_t, int *); 185 extern int topo_prop_set_int64(tnode_t *, const char *, const char *, 186 int, int64_t, int *); 187 extern int topo_prop_set_uint64(tnode_t *, const char *, const char *, 188 int, uint64_t, int *); 189 extern int topo_prop_set_double(tnode_t *, const char *, const char *, 190 int, double, int *); 191 extern int topo_prop_set_string(tnode_t *, const char *, const char *, 192 int, const char *, int *); 193 extern int topo_prop_set_fmri(tnode_t *, const char *, const char *, 194 int, const nvlist_t *, int *); 195 extern int topo_prop_set_int32_array(tnode_t *, const char *, const char *, int, 196 int32_t *, uint_t, int *); 197 extern int topo_prop_set_uint32_array(tnode_t *, const char *, const char *, 198 int, uint32_t *, uint_t, int *); 199 extern int topo_prop_set_int64_array(tnode_t *, const char *, const char *, 200 int, int64_t *, uint_t, int *); 201 extern int topo_prop_set_uint64_array(tnode_t *, const char *, const char *, 202 int, uint64_t *, uint_t, int *); 203 extern int topo_prop_set_string_array(tnode_t *, const char *, const char *, 204 int, const char **, uint_t, int *); 205 extern int topo_prop_set_fmri_array(tnode_t *, const char *, const char *, 206 int, const nvlist_t **, uint_t, int *); 207 208 #define TOPO_PROP_IMMUTABLE 0 209 #define TOPO_PROP_MUTABLE 0x01 210 #define TOPO_PROP_NONVOLATILE 0x02 211 212 /* Protocol property group and property names */ 213 #define TOPO_PGROUP_PROTOCOL "protocol" /* Required property group */ 214 #define TOPO_PROP_RESOURCE "resource" /* resource FMRI */ 215 #define TOPO_PROP_ASRU "ASRU" /* ASRU FMRI */ 216 #define TOPO_PROP_FRU "FRU" /* FRU FMRI */ 217 #define TOPO_PROP_MOD "module" /* software module FMRI */ 218 #define TOPO_PROP_PKG "package" /* software package FMRI */ 219 #define TOPO_PROP_LABEL "label" /* property LABEL */ 220 221 #define TOPO_METH_FAC_ENUM "fac_enum" 222 223 /* 224 * System property group 225 */ 226 #define TOPO_PGROUP_SYSTEM "system" 227 #define TOPO_PROP_ISA "isa" 228 #define TOPO_PROP_MACHINE "machine" 229 230 /* 231 * These enum definitions are used to define a set of error tags associated with 232 * libtopo error conditions occuring during the adminstration of 233 * properties, invocation of methods and fmri-based queries. The shell script 234 * mkerror.sh is used to parse this file and create a corresponding topo_error.c 235 * source file. 236 * 237 * If you do something other than add a new error tag here, you may need to 238 * update the mkerror shell script as it is based upon simple regexps. 239 */ 240 typedef enum topo_prop_errno { 241 ETOPO_PROP_UNKNOWN = 3000, /* unknown topo prop error */ 242 ETOPO_PROP_NOENT, /* undefined property or property group */ 243 ETOPO_PROP_DEFD, /* static property already defined */ 244 ETOPO_PROP_NOMEM, /* memory limit exceeded during property allocation */ 245 ETOPO_PROP_TYPE, /* invalid property type */ 246 ETOPO_PROP_NAME, /* invalid property name */ 247 ETOPO_PROP_NOINHERIT, /* can not inherit property */ 248 ETOPO_PROP_NVL, /* malformed property nvlist */ 249 ETOPO_PROP_METHOD, /* get property method failed */ 250 ETOPO_PROP_END /* end of prop errno list (to ease auto-merge) */ 251 } topo_prop_errno_t; 252 253 typedef enum topo_method_errno { 254 ETOPO_METHOD_UNKNOWN = 3100, /* unknown topo method error */ 255 ETOPO_METHOD_INVAL, /* invalid method registration */ 256 ETOPO_METHOD_NOTSUP, /* method not supported */ 257 ETOPO_METHOD_FAIL, /* method failed */ 258 ETOPO_METHOD_VEROLD, /* app is compiled to use obsolete method */ 259 ETOPO_METHOD_VERNEW, /* app is compiled to use obsolete method */ 260 ETOPO_METHOD_NOMEM, /* memory limit exceeded during method op */ 261 ETOPO_METHOD_DEFD, /* method op already defined */ 262 ETOPO_METHOD_END /* end of method errno list */ 263 } topo_method_errno_t; 264 265 typedef enum topo_fmri_errno { 266 ETOPO_FMRI_UNKNOWN = 3200, /* unknown topo fmri error */ 267 ETOPO_FMRI_NVL, /* nvlist allocation failure for FMRI */ 268 ETOPO_FMRI_VERSION, /* invalid FMRI scheme version */ 269 ETOPO_FMRI_MALFORM, /* malformed FMRI */ 270 ETOPO_FMRI_NOMEM, /* memory limit exceeded */ 271 ETOPO_FMRI_END /* end of fmri errno list */ 272 } topo_fmri_errno_t; 273 274 typedef enum topo_hdl_errno { 275 ETOPO_HDL_UNKNOWN = 3300, /* unknown topo handle error */ 276 ETOPO_HDL_ABIVER, /* handle opened with invalid ABI version */ 277 ETOPO_HDL_SNAP, /* snapshot already taken */ 278 ETOPO_HDL_INVAL, /* invalid argument specified */ 279 ETOPO_HDL_UUID, /* uuid already set */ 280 ETOPO_HDL_NOMEM, /* memory limit exceeded */ 281 ETOPO_HDL_END /* end of handle errno list */ 282 } topo_hdl_errno_t; 283 284 extern const char *topo_strerror(int); 285 extern void topo_hdl_strfree(topo_hdl_t *, char *); 286 extern void topo_debug_set(topo_hdl_t *, const char *, const char *); 287 288 /* 289 * The following functions and data structures to support property 290 * observability are private to the fmtopo command. 291 */ 292 293 /* 294 * Each topology node advertises the name and data stability of each of its 295 * modules and properties. (see attributes(5)). 296 */ 297 298 /* 299 * Topo stability attributes 300 */ 301 typedef enum topo_stability { 302 TOPO_STABILITY_UNKNOWN = 0, /* private to libtopo */ 303 TOPO_STABILITY_INTERNAL, /* private to libtopo */ 304 TOPO_STABILITY_PRIVATE, /* private to Sun */ 305 TOPO_STABILITY_OBSOLETE, /* scheduled for removal */ 306 TOPO_STABILITY_EXTERNAL, /* not controlled by Sun */ 307 TOPO_STABILITY_UNSTABLE, /* new or rapidly changing */ 308 TOPO_STABILITY_EVOLVING, /* less rapidly changing */ 309 TOPO_STABILITY_STABLE, /* mature interface from Sun */ 310 TOPO_STABILITY_STANDARD /* industry standard */ 311 } topo_stability_t; 312 313 #define TOPO_STABILITY_MAX TOPO_STABILITY_STANDARD /* max valid stab */ 314 315 typedef struct topo_pgroup_info { 316 const char *tpi_name; /* property group name */ 317 topo_stability_t tpi_namestab; /* stability of group name */ 318 topo_stability_t tpi_datastab; /* stability of all property values */ 319 topo_version_t tpi_version; /* version of pgroup definition */ 320 } topo_pgroup_info_t; 321 322 extern topo_stability_t topo_name2stability(const char *); 323 extern const char *topo_stability2name(topo_stability_t); 324 extern void topo_pgroup_destroy(tnode_t *, const char *); 325 extern topo_pgroup_info_t *topo_pgroup_info(tnode_t *, const char *, int *); 326 327 typedef enum { 328 TOPO_TYPE_INVALID = 0, 329 TOPO_TYPE_BOOLEAN, /* boolean */ 330 TOPO_TYPE_INT32, /* int32_t */ 331 TOPO_TYPE_UINT32, /* uint32_t */ 332 TOPO_TYPE_INT64, /* int64_t */ 333 TOPO_TYPE_UINT64, /* uint64_t */ 334 TOPO_TYPE_STRING, /* const char* */ 335 TOPO_TYPE_TIME, /* uint64_t */ 336 TOPO_TYPE_SIZE, /* uint64_t */ 337 TOPO_TYPE_FMRI, /* nvlist_t */ 338 TOPO_TYPE_INT32_ARRAY, /* array of int32_t */ 339 TOPO_TYPE_UINT32_ARRAY, /* array of uint32_t */ 340 TOPO_TYPE_INT64_ARRAY, /* array of int64_t */ 341 TOPO_TYPE_UINT64_ARRAY, /* array of uint64_t */ 342 TOPO_TYPE_STRING_ARRAY, /* array of const char* */ 343 TOPO_TYPE_FMRI_ARRAY, /* array of nvlist_t */ 344 TOPO_TYPE_DOUBLE /* double */ 345 } topo_type_t; 346 347 extern nvlist_t *topo_prop_getprops(tnode_t *, int *err); 348 extern int topo_prop_getprop(tnode_t *, const char *, const char *, 349 nvlist_t *, nvlist_t **, int *); 350 extern int topo_prop_getpgrp(tnode_t *, const char *, nvlist_t **, int *); 351 extern int topo_prop_setprop(tnode_t *, const char *, nvlist_t *, 352 int, nvlist_t *, int *); 353 extern int topo_fmri_getprop(topo_hdl_t *, nvlist_t *, const char *, 354 const char *, nvlist_t *, nvlist_t **, int *); 355 extern int topo_fmri_getpgrp(topo_hdl_t *, nvlist_t *, const char *, 356 nvlist_t **, int *); 357 extern int topo_fmri_setprop(topo_hdl_t *, nvlist_t *, const char *, 358 nvlist_t *, int, nvlist_t *, int *); 359 360 /* Property node NVL names used in topo_prop_getprops */ 361 #define TOPO_PROP_GROUP "property-group" 362 #define TOPO_PROP_GROUP_NAME "property-group-name" 363 #define TOPO_PROP_GROUP_DSTAB "property-group-data-stability" 364 #define TOPO_PROP_GROUP_NSTAB "property-group-name-stability" 365 #define TOPO_PROP_GROUP_VERSION "property-group-version" 366 #define TOPO_PROP_VAL "property" 367 #define TOPO_PROP_VAL_NAME "property-name" 368 #define TOPO_PROP_VAL_VAL "property-value" 369 #define TOPO_PROP_VAL_TYPE "property-type" 370 #define TOPO_PROP_FLAG "property-flag" 371 372 /* 373 * ARGS list used in topo property methods 374 */ 375 #define TOPO_PROP_ARGS "args" 376 #define TOPO_PROP_PARGS "private-args" 377 378 extern int topo_xml_print(topo_hdl_t *, FILE *, const char *scheme, int *); 379 380 extern void *topo_hdl_alloc(topo_hdl_t *, size_t); 381 extern void *topo_hdl_zalloc(topo_hdl_t *, size_t); 382 extern void topo_hdl_free(topo_hdl_t *, void *, size_t); 383 extern int topo_hdl_nvalloc(topo_hdl_t *, nvlist_t **, uint_t); 384 extern int topo_hdl_nvdup(topo_hdl_t *, nvlist_t *, nvlist_t **); 385 extern char *topo_hdl_strdup(topo_hdl_t *, const char *); 386 387 /* 388 * Interfaces for converting sensor/indicator types, units, states, etc to 389 * a string 390 */ 391 void topo_sensor_type_name(uint32_t type, char *buf, size_t len); 392 void topo_sensor_units_name(uint8_t type, char *buf, size_t len); 393 void topo_led_type_name(uint8_t type, char *buf, size_t len); 394 void topo_led_state_name(uint8_t type, char *buf, size_t len); 395 void topo_sensor_state_name(uint32_t sensor_type, uint8_t state, char *buf, 396 size_t len); 397 398 /* 399 * Defines for standard properties for sensors and indicators 400 */ 401 #define TOPO_PGROUP_FACILITY "facility" 402 403 #define TOPO_SENSOR_READING "reading" 404 #define TOPO_SENSOR_STATE "state" 405 #define TOPO_SENSOR_CLASS "sensor-class" 406 #define TOPO_FACILITY_TYPE "type" 407 #define TOPO_SENSOR_UNITS "units" 408 #define TOPO_LED_MODE "mode" 409 410 /* 411 * Sensor Classes 412 * 413 * The "sensor-class" property in the "facility" propgroup on 414 * facility nodes of type "sensor" should be set to one of these 415 * two values. 416 * 417 * Threshold sensors provide an analog sensor reading via the 418 * "reading" property in the facility propgroup. They will also 419 * provide one or more discrete states via the "state" property 420 * in the facility propgroup. 421 * 422 * Discrete sensors will not provide an analog reading by will 423 * provide one or more discrete states via the "state" property 424 * in the facility propgroup. 425 */ 426 #define TOPO_SENSOR_CLASS_THRESHOLD "threshold" 427 #define TOPO_SENSOR_CLASS_DISCRETE "discrete" 428 429 /* 430 * Sensor unit types. We're using the unit types and corresponding 431 * codes described in the IPMI 2.0 spec as a reference as it seems to be a 432 * reasonably comprehensive list. This also simplifies the IPMI provider code 433 * since the unit type codes will map exactly to what libtopo uses (so no 434 * conversion necessary). 435 */ 436 typedef enum topo_sensor_unit { 437 TOPO_SENSOR_UNITS_UNSPECIFIED = 0, 438 TOPO_SENSOR_UNITS_DEGREES_C, 439 TOPO_SENSOR_UNITS_DEGREES_F, 440 TOPO_SENSOR_UNITS_DEGREES_K, 441 TOPO_SENSOR_UNITS_VOLTS, 442 TOPO_SENSOR_UNITS_AMPS, 443 TOPO_SENSOR_UNITS_WATTS, 444 TOPO_SENSOR_UNITS_JOULES, 445 TOPO_SENSOR_UNITS_COULOMBS, 446 TOPO_SENSOR_UNITS_VA, 447 TOPO_SENSOR_UNITS_NITS, 448 TOPO_SENSOR_UNITS_LUMEN, 449 TOPO_SENSOR_UNITS_LUX, 450 TOPO_SENSOR_UNITS_CANDELA, 451 TOPO_SENSOR_UNITS_KPA, 452 TOPO_SENSOR_UNITS_PSI, 453 454 TOPO_SENSOR_UNITS_NEWTON, 455 TOPO_SENSOR_UNITS_CFM, 456 TOPO_SENSOR_UNITS_RPM, 457 TOPO_SENSOR_UNITS_HZ, 458 TOPO_SENSOR_UNITS_MICROSEC, 459 TOPO_SENSOR_UNITS_MILLISEC, 460 TOPO_SENSOR_UNITS_SECS, 461 TOPO_SENSOR_UNITS_MIN, 462 TOPO_SENSOR_UNITS_HOUR, 463 TOPO_SENSOR_UNITS_DAY, 464 TOPO_SENSOR_UNITS_WEEK, 465 TOPO_SENSOR_UNITS_MIL, 466 TOPO_SENSOR_UNITS_INCHES, 467 TOPO_SENSOR_UNITS_FEET, 468 TOPO_SENSOR_UNITS_CUB_INCH, 469 TOPO_SENSOR_UNITS_CUB_FEET, 470 471 TOPO_SENSOR_UNITS_MM, 472 TOPO_SENSOR_UNITS_CM, 473 TOPO_SENSOR_UNITS_METERS, 474 TOPO_SENSOR_UNITS_CUB_CM, 475 TOPO_SENSOR_UNITS_CUB_METER, 476 TOPO_SENSOR_UNITS_LITERS, 477 TOPO_SENSOR_UNITS_FLUID_OUNCE, 478 TOPO_SENSOR_UNITS_RADIANS, 479 TOPO_SENSOR_UNITS_STERADIANS, 480 TOPO_SENSOR_UNITS_REVOLUTIONS, 481 TOPO_SENSOR_UNITS_CYCLES, 482 TOPO_SENSOR_UNITS_GRAVITIES, 483 TOPO_SENSOR_UNITS_OUNCE, 484 TOPO_SENSOR_UNITS_POUND, 485 TOPO_SENSOR_UNITS_FOOT_POUND, 486 TOPO_SENSOR_UNITS_OZ_INCH, 487 488 TOPO_SENSOR_UNITS_GAUSS, 489 TOPO_SENSOR_UNITS_GILBERTS, 490 TOPO_SENSOR_UNITS_HENRY, 491 TOPO_SENSOR_UNITS_MILHENRY, 492 TOPO_SENSOR_UNITS_FARAD, 493 TOPO_SENSOR_UNITS_MICROFARAD, 494 TOPO_SENSOR_UNITS_OHMS, 495 TOPO_SENSOR_UNITS_SIEMENS, 496 TOPO_SENSOR_UNITS_MOLE, 497 TOPO_SENSOR_UNITS_BECQUEREL, 498 TOPO_SENSOR_UNITS_PPM, 499 TOPO_SENSOR_UNITS_RESERVED1, 500 TOPO_SENSOR_UNITS_DECIBELS, 501 TOPO_SENSOR_UNITS_DBA, 502 TOPO_SENSOR_UNITS_DBC, 503 TOPO_SENSOR_UNITS_GRAY, 504 505 TOPO_SENSOR_UNITS_SIEVERT, 506 TOPO_SENSOR_UNITS_COLOR_TEMP_K, 507 TOPO_SENSOR_UNITS_BIT, 508 TOPO_SENSOR_UNITS_KILOBIT, 509 TOPO_SENSOR_UNITS_MEGABIT, 510 TOPO_SENSOR_UNITS_GIGABIT, 511 TOPO_SENSOR_UNITS_BYTE, 512 TOPO_SENSOR_UNITS_KILOBYTE, 513 TOPO_SENSOR_UNITS_MEGABYTE, 514 TOPO_SENSOR_UNITS_GIGABYTE, 515 TOPO_SENSOR_UNITS_WORD, 516 TOPO_SENSOR_UNITS_DWORD, 517 TOPO_SENSOR_UNITS_QWORD, 518 TOPO_SENSOR_UNITS_MEMLINE, 519 TOPO_SENSOR_UNITS_HIT, 520 TOPO_SENSOR_UNITS_MISS, 521 522 TOPO_SENSOR_UNITS_RETRY, 523 TOPO_SENSOR_UNITS_RESET, 524 TOPO_SENSOR_UNITS_OVERFLOW, 525 TOPO_SENSOR_UNITS_UNDERRUN, 526 TOPO_SENSOR_UNITS_COLLISION, 527 TOPO_SENSOR_UNITS_PACKETS, 528 TOPO_SENSOR_UNITS_MESSAGES, 529 TOPO_SENSOR_UNITS_CHARACTERS, 530 TOPO_SENSOR_UNITS_ERROR, 531 TOPO_SENSOR_UNITS_CE, 532 TOPO_SENSOR_UNITS_UE, 533 TOPO_SENSOR_UNITS_FATAL_ERROR, 534 TOPO_SENSOR_UNITS_GRAMS 535 } topo_sensor_unit_t; 536 537 /* 538 * These defines are used by the topo_method_sensor_failure to indicate 539 * whether the source of a sensor failure is believed to be the result of an 540 * internal failure, external condition or unknown 541 */ 542 #define TOPO_SENSOR_ERRSRC_UNKNOWN 0 543 #define TOPO_SENSOR_ERRSRC_INTERNAL 1 544 #define TOPO_SENSOR_ERRSRC_EXTERNAL 2 545 546 /* 547 * Sensor Types amd the associated sensor-type-specific states 548 * 549 * These are used to decode the type and state properties in the facility 550 * propgroup on facility nodes of type sensor. 551 * 552 * Again we're basically using the same defines as for IPMI as it's serves 553 * as a good starting point and simplifies the IPMI provider code. Of course 554 * other facility providers will need to convert from their native codes 555 * to the topo code when they set the type and state properties. 556 */ 557 #define TOPO_SENSOR_TYPE_RESERVED 0x0000 558 #define TOPO_SENSOR_TYPE_TEMP 0x0001 559 #define TOPO_SENSOR_TYPE_VOLTAGE 0x0002 560 #define TOPO_SENSOR_TYPE_CURRENT 0x0003 561 #define TOPO_SENSOR_TYPE_FAN 0x0004 562 #define TOPO_SENSOR_TYPE_PHYSICAL 0x0005 563 564 #define TOPO_SENSOR_STATE_PHYSICAL_GENERAL 0x0001 565 #define TOPO_SENSOR_STATE_PHYSICAL_BAY 0x0002 566 #define TOPO_SENSOR_STATE_PHYSICAL_CARD 0x0004 567 #define TOPO_SENSOR_STATE_PHYSICAL_PROCESSOR 0x0008 568 #define TOPO_SENSOR_STATE_PHYSICAL_LAN 0x0010 569 #define TOPO_SENSOR_STATE_PHYSICAL_DOCK 0x0020 570 #define TOPO_SENSOR_STATE_PHYSICAL_FAN 0x0040 571 572 #define TOPO_SENSOR_TYPE_PLATFORM 0x0006 573 574 #define TOPO_SENSOR_STATE_PLATFORM_SECURE 0x0001 575 #define TOPO_SENSOR_STATE_PLATFORM_USER_PASS 0x0002 576 #define TOPO_SENSOR_STATE_PLATFORM_SETUP_PASS 0x0004 577 #define TOPO_SENSOR_STATE_PLATFORM_NETWORK_PASS 0x0008 578 #define TOPO_SENSOR_STATE_PLATFORM_OTHER_PASS 0x0010 579 #define TOPO_SENSOR_STATE_PLATFORM_OUT_OF_BAND 0x0020 580 581 #define TOPO_SENSOR_TYPE_PROCESSOR 0x0007 582 583 #define TOPO_SENSOR_STATE_PROCESSOR_IERR 0x0001 584 #define TOPO_SENSOR_STATE_PROCESSOR_THERMAL 0x0002 585 #define TOPO_SENSOR_STATE_PROCESSOR_FRB1 0x0004 586 #define TOPO_SENSOR_STATE_PROCESSOR_FRB2 0x0008 587 #define TOPO_SENSOR_STATE_PROCESSOR_FRB3 0x0010 588 #define TOPO_SENSOR_STATE_PROCESSOR_CONFIG 0x0020 589 #define TOPO_SENSOR_STATE_PROCESSOR_SMBIOS 0x0040 590 #define TOPO_SENSOR_STATE_PROCESSOR_PRESENT 0x0080 591 #define TOPO_SENSOR_STATE_PROCESSOR_DISABLED 0x0100 592 #define TOPO_SENSOR_STATE_PROCESSOR_TERMINATOR 0x0200 593 #define TOPO_SENSOR_STATE_PROCESSOR_THROTTLED 0x0400 594 595 #define TOPO_SENSOR_TYPE_POWER_SUPPLY 0x0008 596 597 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PRESENT 0x0001 598 #define TOPO_SENSOR_STATE_POWER_SUPPLY_FAILURE 0x0002 599 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PREDFAIL 0x0004 600 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_LOST 0x0008 601 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE 0x0010 602 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE_PRES 0x0020 603 #define TOPO_SENSOR_STATE_POWER_SUPPLY_CONFIG_ERR 0x0040 604 605 #define TOPO_SENSOR_TYPE_POWER_UNIT 0x0009 606 607 #define TOPO_SENSOR_STATE_POWER_UNIT_OFF 0x0001 608 #define TOPO_SENSOR_STATE_POWER_UNIT_CYCLE 0x0002 609 #define TOPO_SENSOR_STATE_POWER_UNIT_240_DOWN 0x0004 610 #define TOPO_SENSOR_STATE_POWER_UNIT_INTERLOCK_DOWN 0x0008 611 #define TOPO_SENSOR_STATE_POWER_UNIT_AC_LOST 0x0010 612 #define TOPO_SENSOR_STATE_POWER_UNIT_SOFT_FAILURE 0x0020 613 #define TOPO_SENSOR_STATE_POWER_UNIT_FAIL 0x0040 614 #define TOPO_SENSOR_STATE_POWER_UNIT_PREDFAIL 0x0080 615 616 #define TOPO_SENSOR_TYPE_COOLING 0x000A 617 #define TOPO_SENSOR_TYPE_OTHER 0x000B 618 619 #define TOPO_SENSOR_TYPE_MEMORY 0x000C 620 621 #define TOPO_SENSOR_STATE_MEMORY_CE 0x0001 622 #define TOPO_SENSOR_STATE_MEMORY_UE 0x0002 623 #define TOPO_SENSOR_STATE_MEMORY_PARITY 0x0004 624 #define TOPO_SENSOR_STATE_MEMORY_SCRUB_FAIL 0x0008 625 #define TOPO_SENSOR_STATE_MEMORY_DISABLED 0x0010 626 #define TOPO_SENSOR_STATE_MEMORY_CE_LOG_LIMIT 0x0020 627 #define TOPO_SENSOR_STATE_MEMORY_PRESENT 0x0040 628 #define TOPO_SENSOR_STATE_MEMORY_CONFIG_ERR 0x0080 629 #define TOPO_SENSOR_STATE_MEMORY_SPARE 0x0100 630 #define TOPO_SENSOR_STATE_MEMORY_THROTTLED 0x0200 631 #define TOPO_SENSOR_STATE_MEMORY_OVERTEMP 0x0400 632 633 #define TOPO_SENSOR_TYPE_BAY 0x000D 634 635 #define TOPO_SENSOR_STATE_BAY_PRESENT 0x0001 636 #define TOPO_SENSOR_STATE_BAY_FAULT 0x0002 637 #define TOPO_SENSOR_STATE_BAY_PREDFAIL 0x0004 638 #define TOPO_SENSOR_STATE_BAY_SPARE 0x0008 639 #define TOPO_SENSOR_STATE_BAY_CHECK 0x0010 640 #define TOPO_SENSOR_STATE_BAY_CRITICAL 0x0020 641 #define TOPO_SENSOR_STATE_BAY_FAILED 0x0040 642 #define TOPO_SENSOR_STATE_BAY_REBUILDING 0x0080 643 #define TOPO_SENSOR_STATE_BAY_ABORTED 0x0100 644 645 #define TOPO_SENSOR_TYPE_POST_RESIZE 0x000E 646 647 #define TOPO_SENSOR_TYPE_FIRMWARE 0x000F 648 649 #define TOPO_SENSOR_STATE_FIRMWARE_ERROR 0x0001 650 #define TOPO_SENSOR_STATE_FIRMWARE_HANG 0x0002 651 #define TOPO_SENSOR_STATE_FIRMWARE_PROGRESS 0x0004 652 653 #define TOPO_SENSOR_TYPE_EVENT_LOG 0x0010 654 655 #define TOPO_SENSOR_STATE_EVENT_LOG_CE 0x0001 656 #define TOPO_SENSOR_STATE_EVENT_LOG_TYPE 0x0002 657 #define TOPO_SENSOR_STATE_EVENT_LOG_RESET 0x0004 658 #define TOPO_SENSOR_STATE_EVENT_LOG_ALL 0x0008 659 #define TOPO_SENSOR_STATE_EVENT_LOG_FULL 0x0010 660 #define TOPO_SENSOR_STATE_EVENT_LOG_ALMOST_FULL 0x0020 661 662 #define TOPO_SENSOR_TYPE_WATCHDOG1 0x0011 663 664 #define TOPO_SENSOR_STATE_WATCHDOG_BIOS_RESET 0x0001 665 #define TOPO_SENSOR_STATE_WATCHDOG_OS_RESET 0x0002 666 #define TOPO_SENSOR_STATE_WATCHDOG_OS_SHUTDOWN 0x0004 667 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_DOWN 0x0008 668 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_CYCLE 0x0010 669 #define TOPO_SENSOR_STATE_WATCHDOG_OS_NMI_DIAG 0x0020 670 #define TOPO_SENSOR_STATE_WATCHDOG_EXPIRED 0x0040 671 #define TOPO_SENSOR_STATE_WATCHDOG_PRE_TIMEOUT_INT 0x0080 672 673 #define TOPO_SENSOR_TYPE_SYSTEM 0x0012 674 675 #define TOPO_SENSOR_STATE_SYSTEM_RECONF 0x0001 676 #define TOPO_SENSOR_STATE_SYSTEM_BOOT 0x0002 677 #define TOPO_SENSOR_STATE_SYSTEM_UNKNOWN_HW_FAILURE 0x0004 678 #define TOPO_SENSOR_STATE_SYSTEM_AUX_LOG_UPDATED 0x0008 679 #define TOPO_SENSOR_STATE_SYSTEM_PEF_ACTION 0x0010 680 #define TOPO_SENSOR_STATE_SYSTEM_TIMETAMP_CLOCKSYNC 0x0020 681 682 #define TOPO_SENSOR_TYPE_CRITICAL 0x0013 683 684 #define TOPO_SENSOR_STATE_CRITICAL_EXT_NMI 0x0001 685 #define TOPO_SENSOR_STATE_CRITICAL_BUS_TIMEOUT 0x0002 686 #define TOPO_SENSOR_STATE_CRITICAL_IO_NMI 0x0004 687 #define TOPO_SENSOR_STATE_CRITICAL_SW_NMI 0x0008 688 #define TOPO_SENSOR_STATE_CRITICAL_PCI_PERR 0x0010 689 #define TOPO_SENSOR_STATE_CRITICAL_PCI_SERR 0x0020 690 #define TOPO_SENSOR_STATE_CRITICAL_EISA_FAILSAFE 0x0040 691 #define TOPO_SENSOR_STATE_CRITICAL_BUS_CE 0x0080 692 #define TOPO_SENSOR_STATE_CRITICAL_BUS_UE 0x0100 693 #define TOPO_SENSOR_STATE_CRITICAL_FATAL_NMI 0x0200 694 #define TOPO_SENSOR_STATE_CRITICAL_BUS_FATAL_ERR 0x0400 695 #define TOPO_SENSOR_STATE_CRITICAL_BUS_DEGRADED 0x0800 696 697 #define TOPO_SENSOR_TYPE_BUTTON 0x0014 698 699 #define TOPO_SENSOR_STATE_BUTTON_PWR 0x0001 700 #define TOPO_SENSOR_STATE_BUTTON_SLEEP 0x0002 701 #define TOPO_SENSOR_STATE_BUTTON_RESET 0x0004 702 #define TOPO_SENSOR_STATE_BUTTON_FRU_LATCH 0x0008 703 #define TOPO_SENSOR_STATE_BUTTON_FRU_SERVICE 0x0010 704 705 #define TOPO_SENSOR_TYPE_MODULE 0x0015 706 #define TOPO_SENSOR_TYPE_MICROCONTROLLER 0x0016 707 #define TOPO_SENSOR_TYPE_CARD 0x0017 708 #define TOPO_SENSOR_TYPE_CHASSIS 0x0018 709 710 #define TOPO_SENSOR_TYPE_CHIPSET 0x0019 711 712 #define TOPO_SENSOR_STATE_CHIPSET_PWR_CTL_FAIL 0x0001 713 714 #define TOPO_SENSOR_TYPE_FRU 0x001A 715 716 #define TOPO_SENSOR_TYPE_CABLE 0x001B 717 718 #define TOPO_SENSOR_STATE_CABLE_CONNECTED 0x0001 719 #define TOPO_SENSOR_STATE_CABLE_CONFIG_ERR 0x0002 720 721 #define TOPO_SENSOR_TYPE_TERMINATOR 0x001C 722 723 #define TOPO_SENSOR_TYPE_BOOT_STATE 0x001D 724 725 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_PWR_UP 0x0001 726 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_HARD_RESET 0x0002 727 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_WARM_RESET 0x0004 728 #define TOPO_SENSOR_STATE_BOOT_STATE_PXE_BOOT 0x0008 729 #define TOPO_SENSOR_STATE_BOOT_STATE_DIAG_BOOT 0x0010 730 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_HARD_RESET 0x0020 731 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_WARM_RESET 0x0040 732 #define TOPO_SENSOR_STATE_BOOT_STATE_SYS_RESTART 0x0080 733 734 #define TOPO_SENSOR_TYPE_BOOT_ERROR 0x001E 735 736 #define TOPO_SENSOR_STATE_BOOT_ERROR_NOMEDIA 0x0001 737 #define TOPO_SENSOR_STATE_BOOT_ERROR_NON_BOOTABLE_DISK 0x0002 738 #define TOPO_SENSOR_STATE_BOOT_ERROR_NO_PXE_SERVER 0x0004 739 #define TOPO_SENSOR_STATE_BOOT_ERROR_INV_BOOT_SECT 0x0008 740 #define TOPO_SENSOR_STATE_BOOT_ERROR_USR_SELECT_TIMEOUT 0x0010 741 742 #define TOPO_SENSOR_TYPE_BOOT_OS 0x001F 743 744 #define TOPO_SENSOR_STATE_BOOT_OS_A_DRV_BOOT_COMPLETE 0x0001 745 #define TOPO_SENSOR_STATE_BOOT_OS_C_DRV_BOOT_COMPLETE 0x0002 746 #define TOPO_SENSOR_STATE_BOOT_OS_PXE_BOOT_COMPLETE 0x0004 747 #define TOPO_SENSOR_STATE_BOOT_OS_DIAG_BOOT_COMPLETE 0x0008 748 #define TOPO_SENSOR_STATE_BOOT_OS_CDROM_BOOT_COMPLETE 0x0010 749 #define TOPO_SENSOR_STATE_BOOT_OS_ROM_BOOT_COMPLETE 0x0020 750 #define TOPO_SENSOR_STATE_BOOT_OS_UNSPEC_BOOT_COMPLETE 0x0040 751 752 #define TOPO_SENSOR_TYPE_OS_SHUTDOWN 0x0020 753 754 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_LOADING 0x0001 755 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_CRASH 0x0002 756 #define TOPO_SENSOR_STATE_OS_STOP_GRACEFUL 0x0004 757 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_GRACEFUL 0x0008 758 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_PEF 0x0010 759 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_BMC 0x0020 760 761 #define TOPO_SENSOR_TYPE_SLOT 0x0021 762 763 #define TOPO_SENSOR_STATE_SLOT_FAULT_ASSERTED 0x0001 764 #define TOPO_SENSOR_STATE_SLOT_IDENTIFY_ASSERTED 0x0002 765 #define TOPO_SENSOR_STATE_SLOT_CONNECTED 0x0004 766 #define TOPO_SENSOR_STATE_SLOT_INSTALL_READY 0x0008 767 #define TOPO_SENSOR_STATE_SLOT_REMOVE_READY 0x0010 768 #define TOPO_SENSOR_STATE_SLOT_PWR_OFF 0x0020 769 #define TOPO_SENSOR_STATE_SLOT_REMOVED 0x0040 770 #define TOPO_SENSOR_STATE_SLOT_INTERLOCK_ASSERTED 0x0080 771 #define TOPO_SENSOR_STATE_SLOT_DISABLED 0x0100 772 #define TOPO_SENSOR_STATE_SLOT_SPARE_DEVICE 0x0200 773 774 #define TOPO_SENSOR_TYPE_ACPI 0x0022 775 776 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S0_G0 0x0001 777 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1 0x0002 778 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S2 0x0004 779 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S3 0x0008 780 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4 0x0010 781 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_G2_SOFT_OFF 0x0020 782 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4_S5_SOFT_OFF 0x0040 783 #define TOPO_SENSOR_STATE_ACPI_PSATTE_G3_MECH_OFF 0x0080 784 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1_S2_S3_SLEEP 0x0100 785 #define TOPO_SENSOR_STATE_ACPI_PSTATE_G1_SLEEP 0x0200 786 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_OVERRIDE 0x0400 787 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_ON 0x0800 788 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_OFF 0x1000 789 #define TOPO_SENSOR_STATE_ACPI_PSTATE_UNKNOWN 0x2000 790 791 #define TOPO_SENSOR_TYPE_WATCHDOG2 0x0023 792 793 #define TOPO_SENSOR_STATE_WATCHDOG2_EXPIRED 0x0001 794 #define TOPO_SENSOR_STATE_WATCHDOG2_HARD_RESET 0x0002 795 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_DOWN 0x0004 796 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_CYCLE 0x0008 797 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED1 0x0010 798 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED2 0x0020 799 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED3 0x0040 800 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED4 0x0080 801 #define TOPO_SENSOR_STATE_WATCHDOG2_TIMEOUT_INT 0x0100 802 803 #define TOPO_SENSOR_TYPE_ALERT 0x0024 804 805 #define TOPO_SENSOR_STATE_ALERT_PLAT_PAGE 0x0001 806 #define TOPO_SENSOR_STATE_ALERT_PLAT_LAN_ALERT 0x0002 807 #define TOPO_SENSOR_STATE_ALERT_PLAT_EVT_TRAP 0x0004 808 #define TOPO_SENSOR_STATE_ALERT_PLAT_SNMP_TRAP 0x0008 809 810 #define TOPO_SENSOR_TYPE_PRESENCE 0x0025 811 812 #define TOPO_SENSOR_STATE_PRESENCE_PRESENT 0x0001 813 #define TOPO_SENSOR_STATE_PRESENCE_ABSENT 0x0002 814 #define TOPO_SENSOR_STATE_PRESENCE_DISABLED 0x0004 815 816 #define TOPO_SENSOR_TYPE_ASIC 0x0026 817 818 #define TOPO_SENSOR_TYPE_LAN 0x0027 819 820 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT_LOST 0x0001 821 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT 0x0002 822 823 #define TOPO_SENSOR_TYPE_HEALTH 0x0028 824 825 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_ACC_DEGRADED 0x0001 826 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_ACC_DEGRADED 0x0002 827 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_OFFLINE 0x0004 828 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_UNAVAIL 0x0008 829 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_FAILURE 0x0010 830 #define TOPO_SENSOR_STATE_HEALTH_FRU_FAILURE 0x0020 831 832 #define TOPO_SENSOR_TYPE_BATTERY 0x0029 833 834 #define TOPO_SENSOR_STATE_BATTERY_LOW 0x0001 835 #define TOPO_SENSOR_STATE_BATTERY_FAILED 0x0002 836 #define TOPO_SENSOR_STATE_BATTERY_PRESENCE 0x0004 837 838 #define TOPO_SENSOR_TYPE_AUDIT 0x002A 839 840 #define TOPO_SENSOR_STATE_AUDIT_SESSION_ACTIVATED 0x0001 841 #define TOPO_SENSOR_STATE_AUDIT_SESSION_DEACTIVATED 0x0002 842 843 #define TOPO_SENSOR_TYPE_VERSION 0x002B 844 845 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE 0x0001 846 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE 0x0002 847 #define TOPO_SENSOR_STATE_VERSION_HW_INCOMPATIBLE 0x0004 848 #define TOPO_SENSOR_STATE_VERSION_SW_INCOMPATIBLE 0x0008 849 #define TOPO_SENSOR_STATE_VERSION_HW_INVAL 0x0010 850 #define TOPO_SENSOR_STATE_VERSION_SW_INVAL 0x0020 851 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE_SUCCESS 0x0040 852 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE_SUCCESS 0x0080 853 854 #define TOPO_SENSOR_TYPE_FRU_STATE 0x002C 855 856 #define TOPO_SENSOR_STATE_FRU_STATE_NOT_INSTALLED 0x0001 857 #define TOPO_SENSOR_STATE_FRU_STATE_INACTIVE 0x0002 858 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_REQ 0x0004 859 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_INPROGRESS 0x0008 860 #define TOPO_SENSOR_STATE_FRU_STATE_ACTIVE 0x0010 861 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_REQ 0x0020 862 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_INPROGRESS 0x0040 863 #define TOPO_SENSOR_STATE_FRU_STATE_COMM_LOST 0x0080 864 865 /* 866 * We simplify the IPMI sensor type code defines by combining the generic 867 * and sensor-specific codes into a single range. Because there's overlap 868 * between the two ranges we offset the generic type codes by 0x0100 869 * which allows ample room in the hole for future expansion of the table to 870 * accomodate either additions to the IPMI spec or to support new sensor types 871 * for alternate provider modules. 872 */ 873 #define TOPO_SENSOR_TYPE_THRESHOLD_STATE 0x0101 874 875 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONCRIT 0x0001 876 #define TOPO_SENSOR_STATE_THRESH_LOWER_CRIT 0x0002 877 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONREC 0x0004 878 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONCRIT 0x0008 879 #define TOPO_SENSOR_STATE_THRESH_UPPER_CRIT 0x0010 880 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONREC 0x0020 881 882 #define TOPO_SENSOR_TYPE_GENERIC_USAGE 0x0102 883 884 #define TOPO_SENSOR_STATE_GENERIC_USAGE_IDLE 0x0001 885 #define TOPO_SENSOR_STATE_GENERIC_USAGE_ACTIVE 0x0002 886 #define TOPO_SENSOR_STATE_GENERIC_USAGE_BUSY 0x0004 887 888 #define TOPO_SENSOR_TYPE_GENERIC_STATE 0x0103 889 890 #define TOPO_SENSOR_STATE_GENERIC_STATE_DEASSERTED 0x0001 891 #define TOPO_SENSOR_STATE_GENERIC_STATE_ASSERTED 0x0002 892 893 #define TOPO_SENSOR_TYPE_GENERIC_PREDFAIL 0x0104 894 895 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_DEASSERTED 0x0001 896 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_ASSERTED 0x0002 897 898 #define TOPO_SENSOR_TYPE_GENERIC_LIMIT 0x0105 899 900 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_NOT_EXCEEDED 0x0001 901 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_EXCEEDED 0x0002 902 903 #define TOPO_SENSOR_TYPE_GENERIC_PERFORMANCE 0x0106 904 905 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_MET 0x0001 906 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_LAGS 0x0002 907 908 #define TOPO_SENSOR_TYPE_SEVERITY 0x0107 909 910 #define TOPO_SENSOR_STATE_SEVERITY_OK 0x0001 911 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_HIGH 0x0002 912 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_HIGH 0x0004 913 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_HIGH 0x0008 914 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_LOW 0x0010 915 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_LOW 0x0020 916 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_LOW 0x0020 917 #define TOPO_SENSOR_STATE_SEVERITY_MONITOR 0x0040 918 #define TOPO_SENSOR_STATE_SEVERITY_INFORMATIONAL 0x0080 919 920 #define TOPO_SENSOR_TYPE_GENERIC_PRESENCE 0x0108 921 922 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_DEASSERTED 0x0001 923 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_ASSERTED 0x0002 924 925 #define TOPO_SENSOR_TYPE_GENERIC_AVAILABILITY 0x0109 926 927 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_DEASSERTED 0x0001 928 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_ASSERTED 0x0002 929 930 #define TOPO_SENSOR_TYPE_GENERIC_STATUS 0x010A 931 932 #define TOPO_SENSOR_STATE_GENERIC_STATUS_RUNNING 0x0001 933 #define TOPO_SENSOR_STATE_GENERIC_STATUS_IN_TEST 0x0002 934 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_OFF 0x0004 935 #define TOPO_SENSOR_STATE_GENERIC_STATUS_ONLINE 0x0008 936 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFFLINE 0x0010 937 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFF_DUTY 0x0020 938 #define TOPO_SENSOR_STATE_GENERIC_STATUS_DEGRADED 0x0040 939 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_SAVE 0x0080 940 #define TOPO_SENSOR_STATE_GENERIC_STATUS_INSTALL_ERR 0x0100 941 942 #define TOPO_SENSOR_TYPE_GENERIC_REDUNDANCY 0x010B 943 944 /* 945 * ACPI power state 946 */ 947 #define TOPO_SENSOR_TYPE_GENERIC_ACPI 0x010C 948 949 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D0 0x0001 950 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D1 0x0002 951 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D2 0x0004 952 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D3 0x0008 953 954 /* 955 * These sensor types don't exist in the IPMI spec, but allow consumers to 956 * associate discrete sensors with component failure. The 'ok' sensor is the 957 * inverse of the 'failure' sensor. Note that the values intentionally mimic 958 * TOPO_SENSOR_TYPE_GENERIC_STATE, so that you can use existing IPMI sensors 959 * but just change the type to get semantically meaningful behavior. 960 */ 961 #define TOPO_SENSOR_TYPE_GENERIC_FAILURE 0x010D 962 963 #define TOPO_SENSOR_STATE_GENERIC_FAIL_DEASSERTED 0x0001 964 #define TOPO_SENSOR_STATE_GENERIC_FAIL_NONRECOV 0x0002 965 #define TOPO_SENSOR_STATE_GENERIC_FAIL_CRITICAL 0x0004 966 967 #define TOPO_SENSOR_TYPE_GENERIC_OK 0x010E 968 969 #define TOPO_SENSOR_STATE_GENERIC_OK_DEASSERTED 0x0001 970 #define TOPO_SENSOR_STATE_GENERIC_OK_ASSERTED 0x0002 971 972 /* 973 * Indicator modes and types 974 */ 975 typedef enum topo_led_state { 976 TOPO_LED_STATE_OFF = 0, 977 TOPO_LED_STATE_ON 978 } topo_led_state_t; 979 980 #define TOPO_FAC_TYPE_ANY 0xFFFFFFFF 981 982 /* 983 * This list is limited to the set of LED's that we're likely to manage through 984 * FMA. Thus is does not include things like power or activity LED's 985 */ 986 typedef enum topo_led_type { 987 TOPO_LED_TYPE_SERVICE = 0, 988 TOPO_LED_TYPE_LOCATE, 989 TOPO_LED_TYPE_OK2RM, 990 TOPO_LED_TYPE_PRESENT 991 } topo_led_type_t; 992 993 994 #ifdef __cplusplus 995 } 996 #endif 997 998 #endif /* _LIBTOPO_H */ 999