xref: /titanic_41/usr/src/cmd/zinject/zinject.c (revision 299d957d28501350bcae7fa4333ff183c062c427)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#pragma ident	"%Z%%M%	%I%	%E% SMI"

/*
 * ZFS Fault Injector
 *
 * This userland component takes a set of options and uses libzpool to translate
 * from a user-visible object type and name to an internal representation.
 * There are two basic types of faults: device faults and data faults.
 *
 *
 * DEVICE FAULTS
 *
 * Errors can be injected into a particular vdev using the '-d' option.  This
 * option takes a path or vdev GUID to uniquely identify the device within a
 * pool.  There are two types of errors that can be injected, EIO and ENXIO,
 * that can be controlled through the '-e' option.  The default is ENXIO.  For
 * EIO failures, any attempt to read data from the device will return EIO, but
 * subsequent attempt to reopen the device will succeed.  For ENXIO failures,
 * any attempt to read from the device will return EIO, but any attempt to
 * reopen the device will also return ENXIO.
 * For label faults, the -L option must be specified. This allows faults
 * to be injected into either the nvlist or uberblock region of all the labels
 * for the specified device.
 *
 * This form of the command looks like:
 *
 * 	zinject -d device [-e errno] [-L <uber | nvlist>] pool
 *
 *
 * DATA FAULTS
 *
 * We begin with a tuple of the form:
 *
 * 	<type,level,range,object>
 *
 * 	type	A string describing the type of data to target.  Each type
 * 		implicitly describes how to interpret 'object'. Currently,
 * 		the following values are supported:
 *
 * 		data		User data for a file
 * 		dnode		Dnode for a file or directory
 *
 *		The following MOS objects are special.  Instead of injecting
 *		errors on a particular object or blkid, we inject errors across
 *		all objects of the given type.
 *
 * 		mos		Any data in the MOS
 * 		mosdir		object directory
 * 		config		pool configuration
 * 		bplist		blkptr list
 * 		spacemap	spacemap
 * 		metaslab	metaslab
 * 		errlog		persistent error log
 *
 * 	level	Object level.  Defaults to '0', not applicable to all types.  If
 * 		a range is given, this corresponds to the indirect block
 * 		corresponding to the specific range.
 *
 *	range	A numerical range [start,end) within the object.  Defaults to
 *		the full size of the file.
 *
 * 	object	A string describing the logical location of the object.  For
 * 		files and directories (currently the only supported types),
 * 		this is the path of the object on disk.
 *
 * This is translated, via libzpool, into the following internal representation:
 *
 * 	<type,objset,object,level,range>
 *
 * These types should be self-explanatory.  This tuple is then passed to the
 * kernel via a special ioctl() to initiate fault injection for the given
 * object.  Note that 'type' is not strictly necessary for fault injection, but
 * is used when translating existing faults into a human-readable string.
 *
 *
 * The command itself takes one of the forms:
 *
 * 	zinject
 * 	zinject <-a | -u pool>
 * 	zinject -c <id|all>
 * 	zinject [-q] <-t type> [-f freq] [-u] [-a] [-m] [-e errno] [-l level]
 *	    [-r range] <object>
 * 	zinject [-f freq] [-a] [-m] [-u] -b objset:object:level:start:end pool
 *
 * With no arguments, the command prints all currently registered injection
 * handlers, with their numeric identifiers.
 *
 * The '-c' option will clear the given handler, or all handlers if 'all' is
 * specified.
 *
 * The '-e' option takes a string describing the errno to simulate.  This must
 * be either 'io' or 'checksum'.  In most cases this will result in the same
 * behavior, but RAID-Z will produce a different set of ereports for this
 * situation.
 *
 * The '-a', '-u', and '-m' flags toggle internal flush behavior.  If '-a' is
 * specified, then the ARC cache is flushed appropriately.  If '-u' is
 * specified, then the underlying SPA is unloaded.  Either of these flags can be
 * specified independently of any other handlers.  The '-m' flag automatically
 * does an unmount and remount of the underlying dataset to aid in flushing the
 * cache.
 *
 * The '-f' flag controls the frequency of errors injected, expressed as a
 * integer percentage between 1 and 100.  The default is 100.
 *
 * The this form is responsible for actually injecting the handler into the
 * framework.  It takes the arguments described above, translates them to the
 * internal tuple using libzpool, and then issues an ioctl() to register the
 * handler.
 *
 * The final form can target a specific bookmark, regardless of whether a
 * human-readable interface has been designed.  It allows developers to specify
 * a particular block by number.
 */

#include <errno.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <strings.h>
#include <unistd.h>

#include <sys/fs/zfs.h>
#include <sys/mount.h>

#include <libzfs.h>

#undef verify	/* both libzfs.h and zfs_context.h want to define this */

#include "zinject.h"

libzfs_handle_t *g_zfs;
int zfs_fd;

#define	ECKSUM	EBADE

static const char *errtable[TYPE_INVAL] = {
	"data",
	"dnode",
	"mos",
	"mosdir",
	"metaslab",
	"config",
	"bplist",
	"spacemap",
	"errlog",
	"uber",
	"nvlist"
};

static err_type_t
name_to_type(const char *arg)
{
	int i;
	for (i = 0; i < TYPE_INVAL; i++)
		if (strcmp(errtable[i], arg) == 0)
			return (i);

	return (TYPE_INVAL);
}

static const char *
type_to_name(uint64_t type)
{
	switch (type) {
	case DMU_OT_OBJECT_DIRECTORY:
		return ("mosdir");
	case DMU_OT_OBJECT_ARRAY:
		return ("metaslab");
	case DMU_OT_PACKED_NVLIST:
		return ("config");
	case DMU_OT_BPLIST:
		return ("bplist");
	case DMU_OT_SPACE_MAP:
		return ("spacemap");
	case DMU_OT_ERROR_LOG:
		return ("errlog");
	default:
		return ("-");
	}
}


/*
 * Print usage message.
 */
void
usage(void)
{
	(void) printf(
	    "usage:\n"
	    "\n"
	    "\tzinject\n"
	    "\n"
	    "\t\tList all active injection records.\n"
	    "\n"
	    "\tzinject -c <id|all>\n"
	    "\n"
	    "\t\tClear the particular record (if given a numeric ID), or\n"
	    "\t\tall records if 'all' is specificed.\n"
	    "\n"
	    "\tzinject -d device [-e errno] [-L <nvlist|uber>] pool\n"
	    "\t\tInject a fault into a particular device or the device's\n"
	    "\t\tlabel.  Label injection can either be 'nvlist' or 'uber'.\n"
	    "\t\t'errno' can either be 'nxio' (the default) or 'io'.\n"
	    "\n"
	    "\tzinject -b objset:object:level:blkid pool\n"
	    "\n"
	    "\t\tInject an error into pool 'pool' with the numeric bookmark\n"
	    "\t\tspecified by the remaining tuple.  Each number is in\n"
	    "\t\thexidecimal, and only one block can be specified.\n"
	    "\n"
	    "\tzinject [-q] <-t type> [-e errno] [-l level] [-r range]\n"
	    "\t    [-a] [-m] [-u] [-f freq] <object>\n"
	    "\n"
	    "\t\tInject an error into the object specified by the '-t' option\n"
	    "\t\tand the object descriptor.  The 'object' parameter is\n"
	    "\t\tinterperted depending on the '-t' option.\n"
	    "\n"
	    "\t\t-q\tQuiet mode.  Only print out the handler number added.\n"
	    "\t\t-e\tInject a specific error.  Must be either 'io' or\n"
	    "\t\t\t'checksum'.  Default is 'io'.\n"
	    "\t\t-l\tInject error at a particular block level. Default is "
	    "0.\n"
	    "\t\t-m\tAutomatically remount underlying filesystem.\n"
	    "\t\t-r\tInject error over a particular logical range of an\n"
	    "\t\t\tobject.  Will be translated to the appropriate blkid\n"
	    "\t\t\trange according to the object's properties.\n"
	    "\t\t-a\tFlush the ARC cache.  Can be specified without any\n"
	    "\t\t\tassociated object.\n"
	    "\t\t-u\tUnload the associated pool.  Can be specified with only\n"
	    "\t\t\ta pool object.\n"
	    "\t\t-f\tOnly inject errors a fraction of the time.  Expressed as\n"
	    "\t\t\ta percentage between 1 and 100.\n"
	    "\n"
	    "\t-t data\t\tInject an error into the plain file contents of a\n"
	    "\t\t\tfile.  The object must be specified as a complete path\n"
	    "\t\t\tto a file on a ZFS filesystem.\n"
	    "\n"
	    "\t-t dnode\tInject an error into the metadnode in the block\n"
	    "\t\t\tcorresponding to the dnode for a file or directory.  The\n"
	    "\t\t\t'-r' option is incompatible with this mode.  The object\n"
	    "\t\t\tis specified as a complete path to a file or directory\n"
	    "\t\t\ton a ZFS filesystem.\n"
	    "\n"
	    "\t-t <mos>\tInject errors into the MOS for objects of the given\n"
	    "\t\t\ttype.  Valid types are: mos, mosdir, config, bplist,\n"
	    "\t\t\tspacemap, metaslab, errlog.  The only valid <object> is\n"
	    "\t\t\tthe poolname.\n");
}

static int
iter_handlers(int (*func)(int, const char *, zinject_record_t *, void *),
    void *data)
{
	zfs_cmd_t zc;
	int ret;

	zc.zc_guid = 0;

	while (ioctl(zfs_fd, ZFS_IOC_INJECT_LIST_NEXT, &zc) == 0)
		if ((ret = func((int)zc.zc_guid, zc.zc_name,
		    &zc.zc_inject_record, data)) != 0)
			return (ret);

	return (0);
}

static int
print_data_handler(int id, const char *pool, zinject_record_t *record,
    void *data)
{
	int *count = data;

	if (record->zi_guid != 0)
		return (0);

	if (*count == 0) {
		(void) printf("%3s  %-15s  %-6s  %-6s  %-8s  %3s  %-15s\n",
		    "ID", "POOL", "OBJSET", "OBJECT", "TYPE", "LVL",  "RANGE");
		(void) printf("---  ---------------  ------  "
		    "------  --------  ---  ---------------\n");
	}

	*count += 1;

	(void) printf("%3d  %-15s  %-6llu  %-6llu  %-8s  %3d  ", id, pool,
	    (u_longlong_t)record->zi_objset, (u_longlong_t)record->zi_object,
	    type_to_name(record->zi_type), record->zi_level);

	if (record->zi_start == 0 &&
	    record->zi_end == -1ULL)
		(void) printf("all\n");
	else
		(void) printf("[%llu, %llu]\n", (u_longlong_t)record->zi_start,
		    (u_longlong_t)record->zi_end);

	return (0);
}

static int
print_device_handler(int id, const char *pool, zinject_record_t *record,
    void *data)
{
	int *count = data;

	if (record->zi_guid == 0)
		return (0);

	if (*count == 0) {
		(void) printf("%3s  %-15s  %s\n", "ID", "POOL", "GUID");
		(void) printf("---  ---------------  ----------------\n");
	}

	*count += 1;

	(void) printf("%3d  %-15s  %llx\n", id, pool,
	    (u_longlong_t)record->zi_guid);

	return (0);
}

/*
 * Print all registered error handlers.  Returns the number of handlers
 * registered.
 */
static int
print_all_handlers(void)
{
	int count = 0;

	(void) iter_handlers(print_device_handler, &count);
	(void) printf("\n");
	count = 0;
	(void) iter_handlers(print_data_handler, &count);

	return (count);
}

/* ARGSUSED */
static int
cancel_one_handler(int id, const char *pool, zinject_record_t *record,
    void *data)
{
	zfs_cmd_t zc;

	zc.zc_guid = (uint64_t)id;

	if (ioctl(zfs_fd, ZFS_IOC_CLEAR_FAULT, &zc) != 0) {
		(void) fprintf(stderr, "failed to remove handler %d: %s\n",
		    id, strerror(errno));
		return (1);
	}

	return (0);
}

/*
 * Remove all fault injection handlers.
 */
static int
cancel_all_handlers(void)
{
	int ret = iter_handlers(cancel_one_handler, NULL);

	(void) printf("removed all registered handlers\n");

	return (ret);
}

/*
 * Remove a specific fault injection handler.
 */
static int
cancel_handler(int id)
{
	zfs_cmd_t zc;

	zc.zc_guid = (uint64_t)id;

	if (ioctl(zfs_fd, ZFS_IOC_CLEAR_FAULT, &zc) != 0) {
		(void) fprintf(stderr, "failed to remove handler %d: %s\n",
		    id, strerror(errno));
		return (1);
	}

	(void) printf("removed handler %d\n", id);

	return (0);
}

/*
 * Register a new fault injection handler.
 */
static int
register_handler(const char *pool, int flags, zinject_record_t *record,
    int quiet)
{
	zfs_cmd_t zc;

	(void) strcpy(zc.zc_name, pool);
	zc.zc_inject_record = *record;
	zc.zc_guid = flags;

	if (ioctl(zfs_fd, ZFS_IOC_INJECT_FAULT, &zc) != 0) {
		(void) fprintf(stderr, "failed to add handler: %s\n",
		    strerror(errno));
		return (1);
	}

	if (flags & ZINJECT_NULL)
		return (0);

	if (quiet) {
		(void) printf("%llu\n", (u_longlong_t)zc.zc_guid);
	} else {
		(void) printf("Added handler %llu with the following "
		    "properties:\n", (u_longlong_t)zc.zc_guid);
		(void) printf("  pool: %s\n", pool);
		if (record->zi_guid) {
			(void) printf("  vdev: %llx\n",
			    (u_longlong_t)record->zi_guid);
		} else {
			(void) printf("objset: %llu\n",
			    (u_longlong_t)record->zi_objset);
			(void) printf("object: %llu\n",
			    (u_longlong_t)record->zi_object);
			(void) printf("  type: %llu\n",
			    (u_longlong_t)record->zi_type);
			(void) printf(" level: %d\n", record->zi_level);
			if (record->zi_start == 0 &&
			    record->zi_end == -1ULL)
				(void) printf(" range: all\n");
			else
				(void) printf(" range: [%llu, %llu)\n",
				    (u_longlong_t)record->zi_start,
				    (u_longlong_t)record->zi_end);
		}
	}

	return (0);
}

int
main(int argc, char **argv)
{
	int c;
	char *range = NULL;
	char *cancel = NULL;
	char *end;
	char *raw = NULL;
	char *device = NULL;
	int level = 0;
	int quiet = 0;
	int error = 0;
	int domount = 0;
	err_type_t type = TYPE_INVAL;
	err_type_t label = TYPE_INVAL;
	zinject_record_t record = { 0 };
	char pool[MAXNAMELEN];
	char dataset[MAXNAMELEN];
	zfs_handle_t *zhp;
	int ret;
	int flags = 0;

	if ((g_zfs = libzfs_init()) == NULL) {
		(void) fprintf(stderr, "internal error: failed to "
		    "initialize ZFS library\n");
		return (1);
	}

	libzfs_print_on_error(g_zfs, B_TRUE);

	if ((zfs_fd = open(ZFS_DEV, O_RDWR)) < 0) {
		(void) fprintf(stderr, "failed to open ZFS device\n");
		return (1);
	}

	if (argc == 1) {
		/*
		 * No arguments.  Print the available handlers.  If there are no
		 * available handlers, direct the user to '-h' for help
		 * information.
		 */
		if (print_all_handlers() == 0) {
			(void) printf("No handlers registered.\n");
			(void) printf("Run 'zinject -h' for usage "
			    "information.\n");
		}

		return (0);
	}

	while ((c = getopt(argc, argv, ":ab:d:f:qhc:t:l:mr:e:uL:")) != -1) {
		switch (c) {
		case 'a':
			flags |= ZINJECT_FLUSH_ARC;
			break;
		case 'b':
			raw = optarg;
			break;
		case 'c':
			cancel = optarg;
			break;
		case 'd':
			device = optarg;
			break;
		case 'e':
			if (strcasecmp(optarg, "io") == 0) {
				error = EIO;
			} else if (strcasecmp(optarg, "checksum") == 0) {
				error = ECKSUM;
			} else if (strcasecmp(optarg, "nxio") == 0) {
				error = ENXIO;
			} else {
				(void) fprintf(stderr, "invalid error type "
				    "'%s': must be 'io', 'checksum' or "
				    "'nxio'\n", optarg);
				usage();
				return (1);
			}
			break;
		case 'f':
			record.zi_freq = atoi(optarg);
			if (record.zi_freq < 1 || record.zi_freq > 100) {
				(void) fprintf(stderr, "frequency range must "
				    "be in the range (0, 100]\n");
				return (1);
			}
			break;
		case 'h':
			usage();
			return (0);
		case 'l':
			level = (int)strtol(optarg, &end, 10);
			if (*end != '\0') {
				(void) fprintf(stderr, "invalid level '%s': "
				    "must be an integer\n", optarg);
				usage();
				return (1);
			}
			break;
		case 'm':
			domount = 1;
			break;
		case 'q':
			quiet = 1;
			break;
		case 'r':
			range = optarg;
			break;
		case 't':
			if ((type = name_to_type(optarg)) == TYPE_INVAL &&
			    !MOS_TYPE(type)) {
				(void) fprintf(stderr, "invalid type '%s'\n",
				    optarg);
				usage();
				return (1);
			}
			break;
		case 'u':
			flags |= ZINJECT_UNLOAD_SPA;
			break;
		case 'L':
			if ((label = name_to_type(optarg)) == TYPE_INVAL &&
			    !LABEL_TYPE(type)) {
				(void) fprintf(stderr, "invalid label type "
				    "'%s'\n", optarg);
				usage();
				return (1);
			}
			break;
		case ':':
			(void) fprintf(stderr, "option -%c requires an "
			    "operand\n", optopt);
			usage();
			return (1);
		case '?':
			(void) fprintf(stderr, "invalid option '%c'\n",
			    optopt);
			usage();
			return (2);
		}
	}

	argc -= optind;
	argv += optind;

	if (cancel != NULL) {
		/*
		 * '-c' is invalid with any other options.
		 */
		if (raw != NULL || range != NULL || type != TYPE_INVAL ||
		    level != 0) {
			(void) fprintf(stderr, "cancel (-c) incompatible with "
			    "any other options\n");
			usage();
			return (2);
		}
		if (argc != 0) {
			(void) fprintf(stderr, "extraneous argument to '-c'\n");
			usage();
			return (2);
		}

		if (strcmp(cancel, "all") == 0) {
			return (cancel_all_handlers());
		} else {
			int id = (int)strtol(cancel, &end, 10);
			if (*end != '\0') {
				(void) fprintf(stderr, "invalid handle id '%s':"
				    " must be an integer or 'all'\n", cancel);
				usage();
				return (1);
			}
			return (cancel_handler(id));
		}
	}

	if (device != NULL) {
		/*
		 * Device (-d) injection uses a completely different mechanism
		 * for doing injection, so handle it separately here.
		 */
		if (raw != NULL || range != NULL || type != TYPE_INVAL ||
		    level != 0) {
			(void) fprintf(stderr, "device (-d) incompatible with "
			    "data error injection\n");
			usage();
			return (2);
		}

		if (argc != 1) {
			(void) fprintf(stderr, "device (-d) injection requires "
			    "a single pool name\n");
			usage();
			return (2);
		}

		(void) strcpy(pool, argv[0]);
		dataset[0] = '\0';

		if (error == ECKSUM) {
			(void) fprintf(stderr, "device error type must be "
			    "'io' or 'nxio'\n");
			return (1);
		}

		if (translate_device(pool, device, label, &record) != 0)
			return (1);
		if (!error)
			error = ENXIO;
	} else if (raw != NULL) {
		if (range != NULL || type != TYPE_INVAL || level != 0) {
			(void) fprintf(stderr, "raw (-b) format with "
			    "any other options\n");
			usage();
			return (2);
		}

		if (argc != 1) {
			(void) fprintf(stderr, "raw (-b) format expects a "
			    "single pool name\n");
			usage();
			return (2);
		}

		(void) strcpy(pool, argv[0]);
		dataset[0] = '\0';

		if (error == ENXIO) {
			(void) fprintf(stderr, "data error type must be "
			    "'checksum' or 'io'\n");
			return (1);
		}

		if (translate_raw(raw, &record) != 0)
			return (1);
		if (!error)
			error = EIO;
	} else if (type == TYPE_INVAL) {
		if (flags == 0) {
			(void) fprintf(stderr, "at least one of '-b', '-d', "
			    "'-t', '-a', or '-u' must be specified\n");
			usage();
			return (2);
		}

		if (argc == 1 && (flags & ZINJECT_UNLOAD_SPA)) {
			(void) strcpy(pool, argv[0]);
			dataset[0] = '\0';
		} else if (argc != 0) {
			(void) fprintf(stderr, "extraneous argument for "
			    "'-f'\n");
			usage();
			return (2);
		}

		flags |= ZINJECT_NULL;
	} else {
		if (argc != 1) {
			(void) fprintf(stderr, "missing object\n");
			usage();
			return (2);
		}

		if (error == ENXIO) {
			(void) fprintf(stderr, "data error type must be "
			    "'checksum' or 'io'\n");
			return (1);
		}

		if (translate_record(type, argv[0], range, level, &record, pool,
		    dataset) != 0)
			return (1);
		if (!error)
			error = EIO;
	}

	/*
	 * If this is pool-wide metadata, unmount everything.  The ioctl() will
	 * unload the pool, so that we trigger spa-wide reopen of metadata next
	 * time we access the pool.
	 */
	if (dataset[0] != '\0' && domount) {
		if ((zhp = zfs_open(g_zfs, dataset, ZFS_TYPE_DATASET)) == NULL)
			return (1);

		if (zfs_unmount(zhp, NULL, 0) != 0)
			return (1);
	}

	record.zi_error = error;

	ret = register_handler(pool, flags, &record, quiet);

	if (dataset[0] != '\0' && domount)
		ret = (zfs_mount(zhp, NULL, 0) != 0);

	libzfs_fini(g_zfs);

	return (ret);
}