xref: /titanic_41/usr/src/cmd/ssh/include/servconf.h (revision 5203bc321053fb87d7073c7640548fab73634793)
1 /*
2  * Author: Tatu Ylonen <ylo@cs.hut.fi>
3  * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
4  *                    All rights reserved
5  * Definitions for server configuration data and for the functions reading it.
6  *
7  * As far as I am concerned, the code I have written for this software
8  * can be used freely for any purpose.  Any derived versions of this
9  * software must be clearly marked as such, and if the derived work is
10  * incompatible with the protocol description in the RFC file, it must be
11  * called by a name other than "ssh" or "Secure Shell".
12  */
13 /*
14  * Copyright (c) 2001, 2010, Oracle and/or its affiliates. All rights reserved.
15  */
16 
17 /*	$OpenBSD: servconf.h,v 1.59 2002/07/30 17:03:55 markus Exp $	*/
18 
19 #ifndef	_SERVCONF_H
20 #define	_SERVCONF_H
21 
22 #ifdef __cplusplus
23 extern "C" {
24 #endif
25 
26 #define MAX_PORTS		256	/* Max # ports. */
27 
28 #define MAX_ALLOW_USERS		256	/* Max # users on allow list. */
29 #define MAX_DENY_USERS		256	/* Max # users on deny list. */
30 #define MAX_ALLOW_GROUPS	256	/* Max # groups on allow list. */
31 #define MAX_DENY_GROUPS		256	/* Max # groups on deny list. */
32 #define MAX_SUBSYSTEMS		256	/* Max # subsystems. */
33 #define MAX_HOSTKEYS		256	/* Max # hostkeys. */
34 
35 /* permit_root_login */
36 #define	PERMIT_NOT_SET		-1
37 #define	PERMIT_NO		0
38 #define	PERMIT_FORCED_ONLY	1
39 #define	PERMIT_NO_PASSWD	2
40 #define	PERMIT_YES		3
41 
42 /* Magic name for internal sftp-server */
43 #define	INTERNAL_SFTP_NAME	"internal-sftp"
44 #define	_SSH_PAM_SERVICE_PREFIX	"sshd"
45 
46 typedef struct {
47 	u_int	num_ports;
48 	u_int	ports_from_cmdline;
49 	u_short ports[MAX_PORTS];	/* Port number to listen on. */
50 	char   *listen_addr;		/* Address on which the server listens. */
51 	struct addrinfo *listen_addrs;	/* Addresses on which the server listens. */
52 	char   *host_key_files[MAX_HOSTKEYS];	/* Files containing host keys. */
53 	int     num_host_key_files;     /* Number of files for host keys. */
54 	char   *pid_file;	/* Where to put our pid */
55 	int     server_key_bits;/* Size of the server key. */
56 	int     login_grace_time;	/* Disconnect if no auth in this time
57 					 * (sec). */
58 	int     key_regeneration_time;	/* Server key lifetime (seconds). */
59 	int     permit_root_login;	/* PERMIT_*, see above */
60 	int     ignore_rhosts;	/* Ignore .rhosts and .shosts. */
61 	int     ignore_user_known_hosts;	/* Ignore ~/.ssh/known_hosts
62 						 * for RhostsRsaAuth */
63 	int     print_motd;	/* If true, print /etc/motd. */
64 	int	print_lastlog;	/* If true, print lastlog */
65 	int     x11_forwarding;	/* If true, permit inet (spoofing) X11 fwd. */
66 	int     x11_display_offset;	/* What DISPLAY number to start
67 					 * searching at */
68 	int     x11_use_localhost;	/* If true, use localhost for fake X11 server. */
69 	char   *xauth_location;	/* Location of xauth program */
70 	int     strict_modes;	/* If true, require string home dir modes. */
71 	int     keepalives;	/* If true, set SO_KEEPALIVE. */
72 	char   *ciphers;	/* Supported SSH2 ciphers. */
73 	char   *macs;		/* Supported SSH2 macs. */
74 	int	protocol;	/* Supported protocol versions. */
75 	int     gateway_ports;	/* If true, allow remote connects to forwarded ports. */
76 	SyslogFacility log_facility;	/* Facility for system logging. */
77 	LogLevel log_level;	/* Level for system logging. */
78 	int     rhosts_authentication;	/* If true, permit rhosts
79 					 * authentication. */
80 	int     rhosts_rsa_authentication;	/* If true, permit rhosts RSA
81 						 * authentication. */
82 	int     hostbased_authentication;	/* If true, permit ssh2 hostbased auth */
83 	int     hostbased_uses_name_from_packet_only; /* experimental */
84 	int     rsa_authentication;	/* If true, permit RSA authentication. */
85 	int     pubkey_authentication;	/* If true, permit ssh2 pubkey authentication. */
86 #ifdef GSSAPI
87 	int     gss_authentication;
88 	int     gss_keyex;
89 	int     gss_store_creds;
90 	int     gss_use_session_ccache;        /* If true, delegated credentials are
91 	                                        * stored in a session specific cache */
92 	int 	gss_cleanup_creds;	       /* If true, destroy cred cache on logout */
93 #endif /* GSSAPI */
94 #if defined(KRB4) || defined(KRB5)
95 	int     kerberos_authentication;	/* If true, permit Kerberos
96 						 * authentication. */
97 	int     kerberos_or_local_passwd;	/* If true, permit kerberos
98 						 * and any other password
99 						 * authentication mechanism,
100 						 * such as SecurID or
101 						 * /etc/passwd */
102 	int     kerberos_ticket_cleanup;	/* If true, destroy ticket
103 						 * file on logout. */
104 #endif
105 #if defined(AFS) || defined(KRB5)
106 	int     kerberos_tgt_passing;	/* If true, permit Kerberos TGT
107 					 * passing. */
108 #endif
109 #ifdef AFS
110 	int     afs_token_passing;	/* If true, permit AFS token passing. */
111 #endif
112 	int     password_authentication;	/* If true, permit password
113 						 * authentication. */
114 
115 	int     kbd_interactive_authentication;
116 	int	challenge_response_authentication;
117 	int	pam_authentication_via_kbd_int;
118 
119 	int     permit_empty_passwd;	/* If false, do not permit empty
120 					 * passwords. */
121 	int     permit_user_env;	/* If true, read ~/.ssh/environment */
122 	int     use_login;	/* If true, login(1) is used */
123 	int     compression;	/* If true, compression is allowed */
124 	int	allow_tcp_forwarding;
125 
126 	u_int	num_allow_users;
127 	char   *allow_users[MAX_ALLOW_USERS];
128 	u_int	num_deny_users;
129 	char   *deny_users[MAX_DENY_USERS];
130 	u_int	num_allow_groups;
131 	char   *allow_groups[MAX_ALLOW_GROUPS];
132 	u_int	num_deny_groups;
133 	char   *deny_groups[MAX_DENY_GROUPS];
134 
135 	u_int	num_subsystems;
136 	char   *subsystem_name[MAX_SUBSYSTEMS];
137 	char   *subsystem_command[MAX_SUBSYSTEMS];
138 	char   *subsystem_args[MAX_SUBSYSTEMS];
139 
140 	int	max_startups_begin;
141 	int	max_startups_rate;
142 	int	max_startups;
143 	char   *banner;			/* SSH-2 banner message */
144 	int	verify_reverse_mapping;	/* cross-check ip and dns */
145 	int	client_alive_interval;	/*
146 					 * poke the client this often to
147 					 * see if it's still there
148 					 */
149 	int	client_alive_count_max;	/*
150 					 * If the client is unresponsive
151 					 * for this many intervals above,
152 					 * disconnect the session
153 					 */
154 
155 	char   *authorized_keys_file;	/* File containing public keys */
156 	char   *authorized_keys_file2;
157 
158 	int	max_auth_tries;
159 	int	max_auth_tries_log;
160 
161 	int	max_init_auth_tries;	    /* SUNW: /etc/default/login */
162 	int	max_init_auth_tries_log;    /* SUNW: /etc/default/login */
163 
164 	int	lookup_client_hostnames;
165 	int	use_openssl_engine;
166 	char   *chroot_directory;
167 	char   *pre_userauth_hook;
168 	char   *pam_service_prefix;
169 	char   *pam_service_name;
170 
171 }       ServerOptions;
172 
173 void	 initialize_server_options(ServerOptions *);
174 void	 fill_default_server_options(ServerOptions *);
175 int	 process_server_config_line(ServerOptions *, char *, const char *, int,
176 	     int *, const char *, const char *, const char *);
177 void	 load_server_config(const char *, Buffer *);
178 void	 parse_server_config(ServerOptions *, const char *, Buffer *,
179 	     const char *, const char *, const char *);
180 void	 parse_server_match_config(ServerOptions *, const char *, const char *,
181 	     const char *);
182 void	 copy_set_server_options(ServerOptions *, ServerOptions *, int);
183 int	 chroot_requested(char *chroot_directory);
184 
185 #ifdef __cplusplus
186 }
187 #endif
188 
189 
190 #endif	/* _SERVCONF_H */
191