1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2010 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 /* 28 * SPARC V9 machine dependent and ELF file class dependent functions. 29 * Contains routines for performing function binding and symbol relocations. 30 */ 31 32 #include <stdio.h> 33 #include <sys/elf.h> 34 #include <sys/elf_SPARC.h> 35 #include <sys/mman.h> 36 #include <dlfcn.h> 37 #include <synch.h> 38 #include <string.h> 39 #include <debug.h> 40 #include <reloc.h> 41 #include <conv.h> 42 #include "_rtld.h" 43 #include "_audit.h" 44 #include "_elf.h" 45 #include "_inline.h" 46 #include "msg.h" 47 48 extern void iflush_range(caddr_t, size_t); 49 extern void plt_upper_32(uintptr_t, uintptr_t); 50 extern void plt_upper_44(uintptr_t, uintptr_t); 51 extern void plt_full_range(uintptr_t, uintptr_t); 52 extern void elf_rtbndr(Rt_map *, ulong_t, caddr_t); 53 extern void elf_rtbndr_far(Rt_map *, ulong_t, caddr_t); 54 55 int 56 elf_mach_flags_check(Rej_desc *rej, Ehdr *ehdr) 57 { 58 /* 59 * Check machine type and flags. 60 */ 61 if (ehdr->e_flags & EF_SPARC_EXT_MASK) { 62 /* 63 * Check vendor-specific extensions. 64 */ 65 if (ehdr->e_flags & EF_SPARC_HAL_R1) { 66 rej->rej_type = SGS_REJ_HAL; 67 rej->rej_info = (uint_t)ehdr->e_flags; 68 return (0); 69 } 70 if ((ehdr->e_flags & EF_SPARC_SUN_US3) & ~at_flags) { 71 rej->rej_type = SGS_REJ_US3; 72 rej->rej_info = (uint_t)ehdr->e_flags; 73 return (0); 74 } 75 76 /* 77 * Generic check. 78 * All of our 64-bit SPARC's support the US1 (UltraSPARC 1) 79 * instructions so that bit isn't worth checking for explicitly. 80 */ 81 if ((ehdr->e_flags & EF_SPARC_EXT_MASK) & ~at_flags) { 82 rej->rej_type = SGS_REJ_BADFLAG; 83 rej->rej_info = (uint_t)ehdr->e_flags; 84 return (0); 85 } 86 } else if ((ehdr->e_flags & ~EF_SPARCV9_MM) != 0) { 87 rej->rej_type = SGS_REJ_BADFLAG; 88 rej->rej_info = (uint_t)ehdr->e_flags; 89 return (0); 90 } 91 return (1); 92 } 93 94 95 void 96 ldso_plt_init(Rt_map *lmp) 97 { 98 /* 99 * There is no need to analyze ld.so because we don't map in any of 100 * its dependencies. However we may map these dependencies in later 101 * (as if ld.so had dlopened them), so initialize the plt and the 102 * permission information. 103 */ 104 if (PLTGOT(lmp)) { 105 Xword pltoff; 106 107 /* 108 * Install the lm pointer in .PLT2 as per the ABI. 109 */ 110 pltoff = (2 * M_PLT_ENTSIZE) / M_PLT_INSSIZE; 111 elf_plt2_init(PLTGOT(lmp) + pltoff, lmp); 112 113 /* 114 * The V9 ABI states that the first 32k PLT entries 115 * use .PLT1, with .PLT0 used by the "latter" entries. 116 * We don't currently implement the extendend format, 117 * so install an error handler in .PLT0 to catch anyone 118 * trying to use it. 119 */ 120 elf_plt_init(PLTGOT(lmp), (caddr_t)elf_rtbndr_far); 121 122 /* 123 * Initialize .PLT1 124 */ 125 pltoff = M_PLT_ENTSIZE / M_PLT_INSSIZE; 126 elf_plt_init(PLTGOT(lmp) + pltoff, (caddr_t)elf_rtbndr); 127 } 128 } 129 130 /* 131 * elf_plt_write() will test to see how far away our destination 132 * address lies. If it is close enough that a branch can 133 * be used instead of a jmpl - we will fill the plt in with 134 * single branch. The branches are much quicker then 135 * a jmpl instruction - see bug#4356879 for further 136 * details. 137 * 138 * NOTE: we pass in both a 'pltaddr' and a 'vpltaddr' since 139 * librtld/dldump update PLT's who's physical 140 * address is not the same as the 'virtual' runtime 141 * address. 142 */ 143 Pltbindtype 144 elf_plt_write(uintptr_t addr, uintptr_t vaddr, void *rptr, uintptr_t symval, 145 Xword pltndx) 146 { 147 Rela *rel = (Rela *)rptr; 148 uintptr_t nsym = ~symval; 149 uintptr_t vpltaddr, pltaddr; 150 long disp; 151 152 153 pltaddr = addr + rel->r_offset; 154 vpltaddr = vaddr + rel->r_offset; 155 disp = symval - vpltaddr - 4; 156 157 if (pltndx >= (M64_PLT_NEARPLTS - M_PLT_XNumber)) { 158 *((Sxword *)pltaddr) = (uintptr_t)symval + 159 (uintptr_t)rel->r_addend - vaddr; 160 DBG_CALL(pltcntfar++); 161 return (PLT_T_FAR); 162 } 163 164 /* 165 * Test if the destination address is close enough to use 166 * a ba,a... instruction to reach it. 167 */ 168 if (S_INRANGE(disp, 23) && !(rtld_flags & RT_FL_NOBAPLT)) { 169 uint_t *pltent, bainstr; 170 Pltbindtype rc; 171 172 pltent = (uint_t *)pltaddr; 173 174 /* 175 * The 176 * 177 * ba,a,pt %icc, <dest> 178 * 179 * is the most efficient of the PLT's. If we 180 * are within +-20 bits - use that branch. 181 */ 182 if (S_INRANGE(disp, 20)) { 183 bainstr = M_BA_A_PT; /* ba,a,pt %icc,<dest> */ 184 /* LINTED */ 185 bainstr |= (uint_t)(S_MASK(19) & (disp >> 2)); 186 rc = PLT_T_21D; 187 DBG_CALL(pltcnt21d++); 188 } else { 189 /* 190 * Otherwise - we fall back to the good old 191 * 192 * ba,a <dest> 193 * 194 * Which still beats a jmpl instruction. 195 */ 196 bainstr = M_BA_A; /* ba,a <dest> */ 197 /* LINTED */ 198 bainstr |= (uint_t)(S_MASK(22) & (disp >> 2)); 199 rc = PLT_T_24D; 200 DBG_CALL(pltcnt24d++); 201 } 202 203 pltent[2] = M_NOP; /* nop instr */ 204 pltent[1] = bainstr; 205 206 iflush_range((char *)(&pltent[1]), 4); 207 pltent[0] = M_NOP; /* nop instr */ 208 iflush_range((char *)(&pltent[0]), 4); 209 return (rc); 210 } 211 212 if ((nsym >> 32) == 0) { 213 plt_upper_32(pltaddr, symval); 214 DBG_CALL(pltcntu32++); 215 return (PLT_T_U32); 216 } 217 218 if ((nsym >> 44) == 0) { 219 plt_upper_44(pltaddr, symval); 220 DBG_CALL(pltcntu44++); 221 return (PLT_T_U44); 222 } 223 224 /* 225 * The PLT destination is not in reach of 226 * a branch instruction - so we fall back 227 * to a 'jmpl' sequence. 228 */ 229 plt_full_range(pltaddr, symval); 230 DBG_CALL(pltcntfull++); 231 return (PLT_T_FULL); 232 } 233 234 /* 235 * Once relocated, the following 6 instruction sequence moves 236 * a 64-bit immediate value into register %g1 237 */ 238 #define VAL64_TO_G1 \ 239 /* 0x00 */ 0x0b, 0x00, 0x00, 0x00, /* sethi %hh(value), %g5 */ \ 240 /* 0x04 */ 0x8a, 0x11, 0x60, 0x00, /* or %g5, %hm(value), %g5 */ \ 241 /* 0x08 */ 0x8b, 0x29, 0x70, 0x20, /* sllx %g5, 32, %g5 */ \ 242 /* 0x0c */ 0x03, 0x00, 0x00, 0x00, /* sethi %lm(value), %g1 */ \ 243 /* 0x10 */ 0x82, 0x10, 0x60, 0x00, /* or %g1, %lo(value), %g1 */ \ 244 /* 0x14 */ 0x82, 0x10, 0x40, 0x05 /* or %g1, %g5, %g1 */ 245 246 /* 247 * Local storage space created on the stack created for this glue 248 * code includes space for: 249 * 0x8 pointer to dyn_data 250 * 0x8 size prev stack frame 251 */ 252 static const Byte dyn_plt_template[] = { 253 /* 0x0 */ 0x2a, 0xcf, 0x80, 0x03, /* brnz,a,pt %fp, 0xc */ 254 /* 0x4 */ 0x82, 0x27, 0x80, 0x0e, /* sub %fp, %sp, %g1 */ 255 /* 0x8 */ 0x82, 0x10, 0x20, 0xb0, /* mov 176, %g1 */ 256 /* 0xc */ 0x9d, 0xe3, 0xbf, 0x40, /* save %sp, -192, %sp */ 257 /* 0x10 */ 0xc2, 0x77, 0xa7, 0xef, /* stx %g1, [%fp + 2031] */ 258 259 /* store prev stack size */ 260 /* 0x14 */ VAL64_TO_G1, /* dyn_data to g1 */ 261 /* 0x2c */ 0xc2, 0x77, 0xa7, 0xf7, /* stx %g1, [%fp + 2039] */ 262 263 /* 0x30 */ VAL64_TO_G1, /* elf_plt_trace() addr to g1 */ 264 265 /* Call to elf_plt_trace() via g1 */ 266 /* 0x48 */ 0x9f, 0xc0, 0x60, 0x00, /* jmpl ! link r[15] to addr in g1 */ 267 /* 0x4c */ 0x01, 0x00, 0x00, 0x00 /* nop ! for jmpl delay slot *AND* */ 268 /* to get 8-byte alignment */ 269 }; 270 271 int dyn_plt_ent_size = sizeof (dyn_plt_template) + 272 sizeof (Addr) + /* reflmp */ 273 sizeof (Addr) + /* deflmp */ 274 sizeof (Word) + /* symndx */ 275 sizeof (Word) + /* sb_flags */ 276 sizeof (Sym); /* symdef */ 277 278 /* 279 * the dynamic plt entry is: 280 * 281 * brnz,a,pt %fp, 1f 282 * sub %sp, %fp, %g1 283 * mov SA(MINFRAME), %g1 284 * 1: 285 * save %sp, -(SA(MINFRAME) + (2 * CLONGSIZE)), %sp 286 * 287 * ! store prev stack size 288 * stx %g1, [%fp + STACK_BIAS - (2 * CLONGSIZE)] 289 * 290 * 2: 291 * ! move dyn_data to %g1 292 * sethi %hh(dyn_data), %g5 293 * or %g5, %hm(dyn_data), %g5 294 * sllx %g5, 32, %g5 295 * sethi %lm(dyn_data), %g1 296 * or %g1, %lo(dyn_data), %g1 297 * or %g1, %g5, %g1 298 * 299 * ! store dyn_data ptr on frame (from %g1) 300 * stx %g1, [%fp + STACK_BIAS - CLONGSIZE] 301 * 302 * ! Move address of elf_plt_trace() into %g1 303 * [Uses same 6 instructions as shown at label 2: above. Not shown.] 304 * 305 * ! Use JMPL to make call. CALL instruction is limited to 30-bits. 306 * ! of displacement. 307 * jmp1 %g1, %o7 308 * 309 * ! JMPL has a delay slot that must be filled. And, the sequence 310 * ! of instructions needs to have 8-byte alignment. This NOP does both. 311 * ! The alignment is needed for the data we put following the 312 * ! instruction. 313 * nop 314 * 315 * dyn data: 316 * Addr reflmp 317 * Addr deflmp 318 * Word symndx 319 * Word sb_flags 320 * Sym symdef (Elf64_Sym = 24-bytes) 321 */ 322 323 /* 324 * Relocate the instructions given by the VAL64_TO_G1 macro above. 325 * The arguments parallel those of do_reloc_rtld(). 326 * 327 * entry: 328 * off - Address of 1st instruction in sequence. 329 * value - Value being relocated (addend) 330 * sym - Name of value being relocated. 331 * lml - link map list 332 * 333 * exit: 334 * Returns TRUE for success, FALSE for failure. 335 */ 336 static int 337 reloc_val64_to_g1(uchar_t *off, Addr *value, const char *sym, Lm_list *lml) 338 { 339 Xword tmp_value; 340 341 /* 342 * relocating: 343 * sethi %hh(value), %g5 344 */ 345 tmp_value = (Xword)value; 346 if (do_reloc_rtld(R_SPARC_HH22, off, &tmp_value, sym, 347 MSG_ORIG(MSG_SPECFIL_DYNPLT), lml) == 0) { 348 return (0); 349 } 350 351 /* 352 * relocating: 353 * or %g5, %hm(value), %g5 354 */ 355 tmp_value = (Xword)value; 356 if (do_reloc_rtld(R_SPARC_HM10, off + 4, &tmp_value, sym, 357 MSG_ORIG(MSG_SPECFIL_DYNPLT), lml) == 0) { 358 return (0); 359 } 360 361 /* 362 * relocating: 363 * sethi %lm(value), %g1 364 */ 365 tmp_value = (Xword)value; 366 if (do_reloc_rtld(R_SPARC_LM22, off + 12, &tmp_value, sym, 367 MSG_ORIG(MSG_SPECFIL_DYNPLT), lml) == 0) { 368 return (0); 369 } 370 371 /* 372 * relocating: 373 * or %g1, %lo(value), %g1 374 */ 375 tmp_value = (Xword)value; 376 if (do_reloc_rtld(R_SPARC_LO10, off + 16, &tmp_value, sym, 377 MSG_ORIG(MSG_SPECFIL_DYNPLT), lml) == 0) { 378 return (0); 379 } 380 381 return (1); 382 } 383 384 static caddr_t 385 elf_plt_trace_write(caddr_t addr, Rela *rptr, Rt_map *rlmp, Rt_map *dlmp, 386 Sym *sym, uint_t symndx, ulong_t pltndx, caddr_t to, uint_t sb_flags, 387 int *fail) 388 { 389 extern ulong_t elf_plt_trace(); 390 uchar_t *dyn_plt; 391 uintptr_t *dyndata; 392 393 /* 394 * If both pltenter & pltexit have been disabled there 395 * there is no reason to even create the glue code. 396 */ 397 if ((sb_flags & (LA_SYMB_NOPLTENTER | LA_SYMB_NOPLTEXIT)) == 398 (LA_SYMB_NOPLTENTER | LA_SYMB_NOPLTEXIT)) { 399 (void) elf_plt_write((uintptr_t)addr, (uintptr_t)addr, 400 rptr, (uintptr_t)to, pltndx); 401 return (to); 402 } 403 404 /* 405 * We only need to add the glue code if there is an auditing 406 * library that is interested in this binding. 407 */ 408 dyn_plt = (uchar_t *)((uintptr_t)AUDINFO(rlmp)->ai_dynplts + 409 (pltndx * dyn_plt_ent_size)); 410 411 /* 412 * Have we initialized this dynamic plt entry yet? If we haven't do it 413 * now. Otherwise this function has been called before, but from a 414 * different plt (ie. from another shared object). In that case 415 * we just set the plt to point to the new dyn_plt. 416 */ 417 if (*dyn_plt == 0) { 418 Sym *symp; 419 Lm_list *lml = LIST(rlmp); 420 421 (void) memcpy((void *)dyn_plt, dyn_plt_template, 422 sizeof (dyn_plt_template)); 423 dyndata = (uintptr_t *)((uintptr_t)dyn_plt + 424 sizeof (dyn_plt_template)); 425 426 /* 427 * relocating: 428 * VAL64_TO_G1(dyndata) 429 * VAL64_TO_G1(&elf_plt_trace) 430 */ 431 if (!(reloc_val64_to_g1((dyn_plt + 0x14), dyndata, 432 MSG_ORIG(MSG_SYM_LADYNDATA), lml) && 433 reloc_val64_to_g1((dyn_plt + 0x30), (Addr *)&elf_plt_trace, 434 MSG_ORIG(MSG_SYM_ELFPLTTRACE), lml))) { 435 *fail = 1; 436 return (0); 437 } 438 439 *dyndata++ = (Addr)rlmp; 440 *dyndata++ = (Addr)dlmp; 441 442 /* 443 * symndx in the high word, sb_flags in the low. 444 */ 445 *dyndata = (Addr)sb_flags; 446 *(Word *)dyndata = symndx; 447 dyndata++; 448 449 symp = (Sym *)dyndata; 450 *symp = *sym; 451 symp->st_value = (Addr)to; 452 iflush_range((void *)dyn_plt, sizeof (dyn_plt_template)); 453 } 454 455 (void) elf_plt_write((uintptr_t)addr, (uintptr_t)addr, rptr, 456 (uintptr_t)dyn_plt, pltndx); 457 return ((caddr_t)dyn_plt); 458 } 459 460 /* 461 * Function binding routine - invoked on the first call to a function through 462 * the procedure linkage table; 463 * passes first through an assembly language interface. 464 * 465 * Takes the address of the PLT entry where the call originated, 466 * the offset into the relocation table of the associated 467 * relocation entry and the address of the link map (rt_private_map struct) 468 * for the entry. 469 * 470 * Returns the address of the function referenced after re-writing the PLT 471 * entry to invoke the function directly. 472 * 473 * On error, causes process to terminate with a signal. 474 */ 475 ulong_t 476 elf_bndr(Rt_map *lmp, ulong_t pltoff, caddr_t from) 477 { 478 Rt_map *nlmp, *llmp; 479 Addr addr, vaddr, reloff, symval; 480 char *name; 481 Rela *rptr; 482 Sym *rsym, *nsym; 483 Xword pltndx; 484 uint_t binfo, sb_flags = 0, dbg_class; 485 ulong_t rsymndx; 486 Slookup sl; 487 Sresult sr; 488 Pltbindtype pbtype; 489 int entry, lmflags, farplt = 0; 490 Lm_list *lml; 491 492 /* 493 * For compatibility with libthread (TI_VERSION 1) we track the entry 494 * value. A zero value indicates we have recursed into ld.so.1 to 495 * further process a locking request. Under this recursion we disable 496 * tsort and cleanup activities. 497 */ 498 entry = enter(0); 499 500 lml = LIST(lmp); 501 if ((lmflags = lml->lm_flags) & LML_FLG_RTLDLM) { 502 dbg_class = dbg_desc->d_class; 503 dbg_desc->d_class = 0; 504 } 505 506 /* 507 * Must calculate true plt relocation address from reloc. 508 * Take offset, subtract number of reserved PLT entries, and divide 509 * by PLT entry size, which should give the index of the plt 510 * entry (and relocation entry since they have been defined to be 511 * in the same order). Then we must multiply by the size of 512 * a relocation entry, which will give us the offset of the 513 * plt relocation entry from the start of them given by JMPREL(lm). 514 */ 515 addr = pltoff - M_PLT_RESERVSZ; 516 517 if (pltoff < (M64_PLT_NEARPLTS * M_PLT_ENTSIZE)) { 518 pltndx = addr / M_PLT_ENTSIZE; 519 } else { 520 ulong_t pltblockoff; 521 522 pltblockoff = pltoff - (M64_PLT_NEARPLTS * M_PLT_ENTSIZE); 523 pltndx = M64_PLT_NEARPLTS + 524 ((pltblockoff / M64_PLT_FBLOCKSZ) * M64_PLT_FBLKCNTS) + 525 ((pltblockoff % M64_PLT_FBLOCKSZ) / M64_PLT_FENTSIZE) - 526 M_PLT_XNumber; 527 farplt = 1; 528 } 529 530 /* 531 * Perform some basic sanity checks. If we didn't get a load map 532 * or the plt offset is invalid then its possible someone has walked 533 * over the plt entries or jumped to plt[01] out of the blue. 534 */ 535 if (!lmp || (!farplt && (addr % M_PLT_ENTSIZE) != 0) || 536 (farplt && (addr % M_PLT_INSSIZE))) { 537 Conv_inv_buf_t inv_buf; 538 539 eprintf(lml, ERR_FATAL, MSG_INTL(MSG_REL_PLTREF), 540 conv_reloc_SPARC_type(R_SPARC_JMP_SLOT, 0, &inv_buf), 541 EC_NATPTR(lmp), EC_XWORD(pltoff), EC_NATPTR(from)); 542 rtldexit(lml, 1); 543 } 544 reloff = pltndx * sizeof (Rela); 545 546 /* 547 * Use relocation entry to get symbol table entry and symbol name. 548 */ 549 addr = (ulong_t)JMPREL(lmp); 550 rptr = (Rela *)(addr + reloff); 551 rsymndx = ELF_R_SYM(rptr->r_info); 552 rsym = (Sym *)((ulong_t)SYMTAB(lmp) + (rsymndx * SYMENT(lmp))); 553 name = (char *)(STRTAB(lmp) + rsym->st_name); 554 555 /* 556 * Determine the last link-map of this list, this'll be the starting 557 * point for any tsort() processing. 558 */ 559 llmp = lml->lm_tail; 560 561 /* 562 * Find definition for symbol. Initialize the symbol lookup, and symbol 563 * result, data structures. 564 */ 565 SLOOKUP_INIT(sl, name, lmp, lml->lm_head, ld_entry_cnt, 0, 566 rsymndx, rsym, 0, LKUP_DEFT); 567 SRESULT_INIT(sr, name); 568 569 if (lookup_sym(&sl, &sr, &binfo, NULL) == 0) { 570 eprintf(lml, ERR_FATAL, MSG_INTL(MSG_REL_NOSYM), NAME(lmp), 571 demangle(name)); 572 rtldexit(lml, 1); 573 } 574 575 name = (char *)sr.sr_name; 576 nlmp = sr.sr_dmap; 577 nsym = sr.sr_sym; 578 579 symval = nsym->st_value; 580 581 if (!(FLAGS(nlmp) & FLG_RT_FIXED) && 582 (nsym->st_shndx != SHN_ABS)) 583 symval += ADDR(nlmp); 584 if ((lmp != nlmp) && ((FLAGS1(nlmp) & FL1_RT_NOINIFIN) == 0)) { 585 /* 586 * Record that this new link map is now bound to the caller. 587 */ 588 if (bind_one(lmp, nlmp, BND_REFER) == 0) 589 rtldexit(lml, 1); 590 } 591 592 if ((lml->lm_tflags | AFLAGS(lmp)) & LML_TFLG_AUD_SYMBIND) { 593 /* LINTED */ 594 uint_t symndx = (uint_t)(((uintptr_t)nsym - 595 (uintptr_t)SYMTAB(nlmp)) / SYMENT(nlmp)); 596 597 symval = audit_symbind(lmp, nlmp, nsym, symndx, symval, 598 &sb_flags); 599 } 600 601 if (FLAGS(lmp) & FLG_RT_FIXED) 602 vaddr = 0; 603 else 604 vaddr = ADDR(lmp); 605 606 pbtype = PLT_T_NONE; 607 if (!(rtld_flags & RT_FL_NOBIND)) { 608 if (((lml->lm_tflags | AFLAGS(lmp)) & 609 (LML_TFLG_AUD_PLTENTER | LML_TFLG_AUD_PLTEXIT)) && 610 AUDINFO(lmp)->ai_dynplts) { 611 int fail = 0; 612 /* LINTED */ 613 uint_t symndx = (uint_t)(((uintptr_t)nsym - 614 (uintptr_t)SYMTAB(nlmp)) / SYMENT(nlmp)); 615 616 symval = (ulong_t)elf_plt_trace_write((caddr_t)vaddr, 617 rptr, lmp, nlmp, nsym, symndx, pltndx, 618 (caddr_t)symval, sb_flags, &fail); 619 if (fail) 620 rtldexit(lml, 1); 621 } else { 622 /* 623 * Write standard PLT entry to jump directly 624 * to newly bound function. 625 */ 626 pbtype = elf_plt_write((uintptr_t)vaddr, 627 (uintptr_t)vaddr, rptr, symval, pltndx); 628 } 629 } 630 631 /* 632 * Print binding information and rebuild PLT entry. 633 */ 634 DBG_CALL(Dbg_bind_global(lmp, (Addr)from, (Off)(from - ADDR(lmp)), 635 (Xword)pltndx, pbtype, nlmp, (Addr)symval, nsym->st_value, 636 name, binfo)); 637 638 /* 639 * Complete any processing for newly loaded objects. Note we don't 640 * know exactly where any new objects are loaded (we know the object 641 * that supplied the symbol, but others may have been loaded lazily as 642 * we searched for the symbol), so sorting starts from the last 643 * link-map know on entry to this routine. 644 */ 645 if (entry) 646 load_completion(llmp); 647 648 /* 649 * Some operations like dldump() or dlopen()'ing a relocatable object 650 * result in objects being loaded on rtld's link-map, make sure these 651 * objects are initialized also. 652 */ 653 if ((LIST(nlmp)->lm_flags & LML_FLG_RTLDLM) && LIST(nlmp)->lm_init) 654 load_completion(nlmp); 655 656 /* 657 * Make sure the object to which we've bound has had it's .init fired. 658 * Cleanup before return to user code. 659 */ 660 if (entry) { 661 is_dep_init(nlmp, lmp); 662 leave(lml, 0); 663 } 664 665 if (lmflags & LML_FLG_RTLDLM) 666 dbg_desc->d_class = dbg_class; 667 668 return (symval); 669 } 670 671 static int 672 bindpltpad(Rt_map *lmp, Alist **padlist, Addr value, void **pltaddr, 673 const char *fname, const char *sname) 674 { 675 Aliste idx = 0; 676 Pltpadinfo ppi, *ppip; 677 void *plt; 678 uintptr_t pltoff; 679 Rela rel; 680 int i; 681 682 for (ALIST_TRAVERSE(*padlist, idx, ppip)) { 683 if (ppip->pp_addr == value) { 684 *pltaddr = ppip->pp_plt; 685 DBG_CALL(Dbg_bind_pltpad_from(lmp, (Addr)*pltaddr, 686 sname)); 687 return (1); 688 } 689 if (ppip->pp_addr > value) 690 break; 691 } 692 693 plt = PLTPAD(lmp); 694 pltoff = (uintptr_t)plt - (uintptr_t)ADDR(lmp); 695 696 PLTPAD(lmp) = (void *)((uintptr_t)PLTPAD(lmp) + M_PLT_ENTSIZE); 697 698 if (PLTPAD(lmp) > PLTPADEND(lmp)) { 699 /* 700 * Just fail in usual relocation way 701 */ 702 *pltaddr = (void *)value; 703 return (1); 704 } 705 rel.r_offset = pltoff; 706 rel.r_info = 0; 707 rel.r_addend = 0; 708 709 /* 710 * elf_plt_write assumes the plt was previously filled 711 * with NOP's, so fill it in now. 712 */ 713 for (i = 0; i < (M_PLT_ENTSIZE / sizeof (uint_t)); i++) { 714 ((uint_t *)plt)[i] = M_NOP; 715 } 716 iflush_range((caddr_t)plt, M_PLT_ENTSIZE); 717 718 (void) elf_plt_write(ADDR(lmp), ADDR(lmp), &rel, value, 0); 719 720 ppi.pp_addr = value; 721 ppi.pp_plt = plt; 722 723 if (alist_insert(padlist, &ppi, sizeof (Pltpadinfo), 724 AL_CNT_PLTPAD, idx) == NULL) 725 return (0); 726 727 *pltaddr = plt; 728 DBG_CALL(Dbg_bind_pltpad_to(lmp, (Addr)*pltaddr, fname, sname)); 729 return (1); 730 } 731 732 /* 733 * Read and process the relocations for one link object, we assume all 734 * relocation sections for loadable segments are stored contiguously in 735 * the file. 736 */ 737 int 738 elf_reloc(Rt_map *lmp, uint_t plt, int *in_nfavl, APlist **textrel) 739 { 740 ulong_t relbgn, relend, relsiz, basebgn, pltbgn, pltend; 741 ulong_t pltndx, roffset, rsymndx, psymndx = 0; 742 uint_t dsymndx, binfo, pbinfo; 743 Byte rtype; 744 long reladd; 745 Addr value, pvalue; 746 Sym *symref, *psymref, *symdef, *psymdef; 747 char *name, *pname; 748 Rt_map *_lmp, *plmp; 749 int ret = 1, noplt = 0; 750 long relacount = RELACOUNT(lmp); 751 Rela *rel; 752 Pltbindtype pbtype; 753 Alist *pltpadlist = NULL; 754 APlist *bound = NULL; 755 756 /* 757 * If an object has any DT_REGISTER entries associated with 758 * it, they are processed now. 759 */ 760 if ((plt == 0) && (FLAGS(lmp) & FLG_RT_REGSYMS)) { 761 if (elf_regsyms(lmp) == 0) 762 return (0); 763 } 764 765 /* 766 * Although only necessary for lazy binding, initialize the first 767 * procedure linkage table entry to go to elf_rtbndr(). dbx(1) seems 768 * to find this useful. 769 */ 770 if ((plt == 0) && PLTGOT(lmp)) { 771 mmapobj_result_t *mpp; 772 Xword pltoff; 773 774 /* 775 * Make sure the segment is writable. 776 */ 777 if ((((mpp = 778 find_segment((caddr_t)PLTGOT(lmp), lmp)) != NULL) && 779 ((mpp->mr_prot & PROT_WRITE) == 0)) && 780 ((set_prot(lmp, mpp, 1) == 0) || 781 (aplist_append(textrel, mpp, AL_CNT_TEXTREL) == NULL))) 782 return (0); 783 784 /* 785 * Install the lm pointer in .PLT2 as per the ABI. 786 */ 787 pltoff = (2 * M_PLT_ENTSIZE) / M_PLT_INSSIZE; 788 elf_plt2_init(PLTGOT(lmp) + pltoff, lmp); 789 790 /* 791 * The V9 ABI states that the first 32k PLT entries 792 * use .PLT1, with .PLT0 used by the "latter" entries. 793 * We don't currently implement the extendend format, 794 * so install an error handler in .PLT0 to catch anyone 795 * trying to use it. 796 */ 797 elf_plt_init(PLTGOT(lmp), (caddr_t)elf_rtbndr_far); 798 799 /* 800 * Initialize .PLT1 801 */ 802 pltoff = M_PLT_ENTSIZE / M_PLT_INSSIZE; 803 elf_plt_init(PLTGOT(lmp) + pltoff, (caddr_t)elf_rtbndr); 804 } 805 806 /* 807 * Initialize the plt start and end addresses. 808 */ 809 if ((pltbgn = (ulong_t)JMPREL(lmp)) != 0) 810 pltend = pltbgn + (ulong_t)(PLTRELSZ(lmp)); 811 812 /* 813 * If we've been called upon to promote an RTLD_LAZY object to an 814 * RTLD_NOW then we're only interested in scaning the .plt table. 815 */ 816 if (plt) { 817 relbgn = pltbgn; 818 relend = pltend; 819 } else { 820 /* 821 * The relocation sections appear to the run-time linker as a 822 * single table. Determine the address of the beginning and end 823 * of this table. There are two different interpretations of 824 * the ABI at this point: 825 * 826 * o The REL table and its associated RELSZ indicate the 827 * concatenation of *all* relocation sections (this is the 828 * model our link-editor constructs). 829 * 830 * o The REL table and its associated RELSZ indicate the 831 * concatenation of all *but* the .plt relocations. These 832 * relocations are specified individually by the JMPREL and 833 * PLTRELSZ entries. 834 * 835 * Determine from our knowledege of the relocation range and 836 * .plt range, the range of the total relocation table. Note 837 * that one other ABI assumption seems to be that the .plt 838 * relocations always follow any other relocations, the 839 * following range checking drops that assumption. 840 */ 841 relbgn = (ulong_t)(REL(lmp)); 842 relend = relbgn + (ulong_t)(RELSZ(lmp)); 843 if (pltbgn) { 844 if (!relbgn || (relbgn > pltbgn)) 845 relbgn = pltbgn; 846 if (!relbgn || (relend < pltend)) 847 relend = pltend; 848 } 849 } 850 if (!relbgn || (relbgn == relend)) { 851 DBG_CALL(Dbg_reloc_run(lmp, 0, plt, DBG_REL_NONE)); 852 return (1); 853 } 854 855 relsiz = (ulong_t)(RELENT(lmp)); 856 basebgn = ADDR(lmp); 857 858 DBG_CALL(Dbg_reloc_run(lmp, M_REL_SHT_TYPE, plt, DBG_REL_START)); 859 860 /* 861 * If we're processing in lazy mode there is no need to scan the 862 * .rela.plt table. 863 */ 864 if (pltbgn && ((MODE(lmp) & RTLD_NOW) == 0)) 865 noplt = 1; 866 867 /* 868 * Loop through relocations. 869 */ 870 while (relbgn < relend) { 871 mmapobj_result_t *mpp; 872 uint_t sb_flags = 0; 873 Addr vaddr; 874 875 rtype = (Byte)ELF_R_TYPE(((Rela *)relbgn)->r_info, M_MACH); 876 877 /* 878 * If this is a RELATIVE relocation in a shared object 879 * (the common case), and if we are not debugging, then 880 * jump into a tighter relocaiton loop (elf_reloc_relacount) 881 * Only make the jump if we've been given a hint on the 882 * number of relocations. 883 */ 884 if ((rtype == R_SPARC_RELATIVE) && 885 ((FLAGS(lmp) & FLG_RT_FIXED) == 0) && (DBG_ENABLED == 0)) { 886 if (relacount) { 887 relbgn = elf_reloc_relative_count(relbgn, 888 relacount, relsiz, basebgn, lmp, textrel); 889 relacount = 0; 890 } else { 891 relbgn = elf_reloc_relative(relbgn, relend, 892 relsiz, basebgn, lmp, textrel); 893 } 894 if (relbgn >= relend) 895 break; 896 rtype = (Byte)ELF_R_TYPE(((Rela *)relbgn)->r_info, 897 M_MACH); 898 } 899 900 roffset = ((Rela *)relbgn)->r_offset; 901 902 reladd = (long)(((Rela *)relbgn)->r_addend); 903 rsymndx = ELF_R_SYM(((Rela *)relbgn)->r_info); 904 905 rel = (Rela *)relbgn; 906 relbgn += relsiz; 907 908 /* 909 * Optimizations. 910 */ 911 if (rtype == R_SPARC_NONE) 912 continue; 913 if (noplt && ((ulong_t)rel >= pltbgn) && 914 ((ulong_t)rel < pltend)) { 915 relbgn = pltend; 916 continue; 917 } 918 919 if (rtype != R_SPARC_REGISTER) { 920 /* 921 * If this is a shared object, add the base address 922 * to offset. 923 */ 924 if (!(FLAGS(lmp) & FLG_RT_FIXED)) 925 roffset += basebgn; 926 927 /* 928 * If this relocation is not against part of the image 929 * mapped into memory we skip it. 930 */ 931 if ((mpp = find_segment((caddr_t)roffset, 932 lmp)) == NULL) { 933 elf_reloc_bad(lmp, (void *)rel, rtype, roffset, 934 rsymndx); 935 continue; 936 } 937 } 938 939 /* 940 * If we're promoting plts, determine if this one has already 941 * been written. An uninitialized plts' second instruction is a 942 * branch. 943 */ 944 if (plt) { 945 uchar_t *_roffset = (uchar_t *)roffset; 946 947 _roffset += M_PLT_INSSIZE; 948 /* LINTED */ 949 if ((*(uint_t *)_roffset & 950 (~(S_MASK(19)))) != M_BA_A_XCC) 951 continue; 952 } 953 954 binfo = 0; 955 pltndx = (ulong_t)-1; 956 pbtype = PLT_T_NONE; 957 958 /* 959 * If a symbol index is specified then get the symbol table 960 * entry, locate the symbol definition, and determine its 961 * address. 962 */ 963 if (rsymndx) { 964 /* 965 * Get the local symbol table entry. 966 */ 967 symref = (Sym *)((ulong_t)SYMTAB(lmp) + 968 (rsymndx * SYMENT(lmp))); 969 970 /* 971 * If this is a local symbol, just use the base address. 972 * (we should have no local relocations in the 973 * executable). 974 */ 975 if (ELF_ST_BIND(symref->st_info) == STB_LOCAL) { 976 value = basebgn; 977 name = NULL; 978 979 /* 980 * Special case TLS relocations. 981 */ 982 if ((rtype == R_SPARC_TLS_DTPMOD32) || 983 (rtype == R_SPARC_TLS_DTPMOD64)) { 984 /* 985 * Use the TLS modid. 986 */ 987 value = TLSMODID(lmp); 988 989 } else if ((rtype == R_SPARC_TLS_TPOFF32) || 990 (rtype == R_SPARC_TLS_TPOFF64)) { 991 if ((value = elf_static_tls(lmp, symref, 992 rel, rtype, 0, roffset, 0)) == 0) { 993 ret = 0; 994 break; 995 } 996 } 997 } else { 998 /* 999 * If the symbol index is equal to the previous 1000 * symbol index relocation we processed then 1001 * reuse the previous values. (Note that there 1002 * have been cases where a relocation exists 1003 * against a copy relocation symbol, our ld(1) 1004 * should optimize this away, but make sure we 1005 * don't use the same symbol information should 1006 * this case exist). 1007 */ 1008 if ((rsymndx == psymndx) && 1009 (rtype != R_SPARC_COPY)) { 1010 /* LINTED */ 1011 if (psymdef == 0) { 1012 DBG_CALL(Dbg_bind_weak(lmp, 1013 (Addr)roffset, (Addr) 1014 (roffset - basebgn), name)); 1015 continue; 1016 } 1017 /* LINTED */ 1018 value = pvalue; 1019 /* LINTED */ 1020 name = pname; 1021 symdef = psymdef; 1022 /* LINTED */ 1023 symref = psymref; 1024 /* LINTED */ 1025 _lmp = plmp; 1026 /* LINTED */ 1027 binfo = pbinfo; 1028 1029 if ((LIST(_lmp)->lm_tflags | 1030 AFLAGS(_lmp)) & 1031 LML_TFLG_AUD_SYMBIND) { 1032 value = audit_symbind(lmp, _lmp, 1033 /* LINTED */ 1034 symdef, dsymndx, value, 1035 &sb_flags); 1036 } 1037 } else { 1038 Slookup sl; 1039 Sresult sr; 1040 1041 /* 1042 * Lookup the symbol definition. 1043 * Initialize the symbol lookup, and 1044 * symbol result, data structures. 1045 */ 1046 name = (char *)(STRTAB(lmp) + 1047 symref->st_name); 1048 1049 SLOOKUP_INIT(sl, name, lmp, 0, 1050 ld_entry_cnt, 0, rsymndx, symref, 1051 rtype, LKUP_STDRELOC); 1052 SRESULT_INIT(sr, name); 1053 symdef = NULL; 1054 1055 if (lookup_sym(&sl, &sr, &binfo, 1056 in_nfavl)) { 1057 name = (char *)sr.sr_name; 1058 _lmp = sr.sr_dmap; 1059 symdef = sr.sr_sym; 1060 } 1061 1062 /* 1063 * If the symbol is not found and the 1064 * reference was not to a weak symbol, 1065 * report an error. Weak references 1066 * may be unresolved. 1067 */ 1068 /* BEGIN CSTYLED */ 1069 if (symdef == 0) { 1070 if (sl.sl_bind != STB_WEAK) { 1071 if (elf_reloc_error(lmp, name, 1072 rel, binfo)) 1073 continue; 1074 1075 ret = 0; 1076 break; 1077 1078 } else { 1079 psymndx = rsymndx; 1080 psymdef = 0; 1081 1082 DBG_CALL(Dbg_bind_weak(lmp, 1083 (Addr)roffset, (Addr) 1084 (roffset - basebgn), name)); 1085 continue; 1086 } 1087 } 1088 /* END CSTYLED */ 1089 1090 /* 1091 * If symbol was found in an object 1092 * other than the referencing object 1093 * then record the binding. 1094 */ 1095 if ((lmp != _lmp) && ((FLAGS1(_lmp) & 1096 FL1_RT_NOINIFIN) == 0)) { 1097 if (aplist_test(&bound, _lmp, 1098 AL_CNT_RELBIND) == 0) { 1099 ret = 0; 1100 break; 1101 } 1102 } 1103 1104 /* 1105 * Calculate the location of definition; 1106 * symbol value plus base address of 1107 * containing shared object. 1108 */ 1109 if (IS_SIZE(rtype)) 1110 value = symdef->st_size; 1111 else 1112 value = symdef->st_value; 1113 1114 if (!(FLAGS(_lmp) & FLG_RT_FIXED) && 1115 !(IS_SIZE(rtype)) && 1116 (symdef->st_shndx != SHN_ABS) && 1117 (ELF_ST_TYPE(symdef->st_info) != 1118 STT_TLS)) 1119 value += ADDR(_lmp); 1120 1121 /* 1122 * Retain this symbol index and the 1123 * value in case it can be used for the 1124 * subsequent relocations. 1125 */ 1126 if (rtype != R_SPARC_COPY) { 1127 psymndx = rsymndx; 1128 pvalue = value; 1129 pname = name; 1130 psymdef = symdef; 1131 psymref = symref; 1132 plmp = _lmp; 1133 pbinfo = binfo; 1134 } 1135 if ((LIST(_lmp)->lm_tflags | 1136 AFLAGS(_lmp)) & 1137 LML_TFLG_AUD_SYMBIND) { 1138 /* LINTED */ 1139 dsymndx = (((uintptr_t)symdef - 1140 (uintptr_t)SYMTAB(_lmp)) / 1141 SYMENT(_lmp)); 1142 value = audit_symbind(lmp, _lmp, 1143 symdef, dsymndx, value, 1144 &sb_flags); 1145 } 1146 } 1147 1148 /* 1149 * If relocation is PC-relative, subtract 1150 * offset address. 1151 */ 1152 if (IS_PC_RELATIVE(rtype)) 1153 value -= roffset; 1154 1155 /* 1156 * Special case TLS relocations. 1157 */ 1158 if ((rtype == R_SPARC_TLS_DTPMOD32) || 1159 (rtype == R_SPARC_TLS_DTPMOD64)) { 1160 /* 1161 * Relocation value is the TLS modid. 1162 */ 1163 value = TLSMODID(_lmp); 1164 1165 } else if ((rtype == R_SPARC_TLS_TPOFF64) || 1166 (rtype == R_SPARC_TLS_TPOFF32)) { 1167 if ((value = elf_static_tls(_lmp, 1168 symdef, rel, rtype, name, roffset, 1169 value)) == 0) { 1170 ret = 0; 1171 break; 1172 } 1173 } 1174 } 1175 } else { 1176 /* 1177 * Special cases. 1178 */ 1179 if (rtype == R_SPARC_REGISTER) { 1180 /* 1181 * A register symbol associated with symbol 1182 * index 0 is initialized (i.e. relocated) to 1183 * a constant in the r_addend field rather than 1184 * to a symbol value. 1185 */ 1186 value = 0; 1187 1188 } else if ((rtype == R_SPARC_TLS_DTPMOD32) || 1189 (rtype == R_SPARC_TLS_DTPMOD64)) { 1190 /* 1191 * TLS relocation value is the TLS modid. 1192 */ 1193 value = TLSMODID(lmp); 1194 } else 1195 value = basebgn; 1196 1197 name = NULL; 1198 } 1199 1200 DBG_CALL(Dbg_reloc_in(LIST(lmp), ELF_DBG_RTLD, M_MACH, 1201 M_REL_SHT_TYPE, rel, NULL, 0, name)); 1202 1203 /* 1204 * Make sure the segment is writable. 1205 */ 1206 if ((rtype != R_SPARC_REGISTER) && 1207 ((mpp->mr_prot & PROT_WRITE) == 0) && 1208 ((set_prot(lmp, mpp, 1) == 0) || 1209 (aplist_append(textrel, mpp, AL_CNT_TEXTREL) == NULL))) { 1210 ret = 0; 1211 break; 1212 } 1213 1214 /* 1215 * Call relocation routine to perform required relocation. 1216 */ 1217 switch (rtype) { 1218 case R_SPARC_REGISTER: 1219 /* 1220 * The v9 ABI 4.2.4 says that system objects may, 1221 * but are not required to, use register symbols 1222 * to inidcate how they use global registers. Thus 1223 * at least %g6, %g7 must be allowed in addition 1224 * to %g2 and %g3. 1225 */ 1226 value += reladd; 1227 if (roffset == STO_SPARC_REGISTER_G1) { 1228 set_sparc_g1(value); 1229 } else if (roffset == STO_SPARC_REGISTER_G2) { 1230 set_sparc_g2(value); 1231 } else if (roffset == STO_SPARC_REGISTER_G3) { 1232 set_sparc_g3(value); 1233 } else if (roffset == STO_SPARC_REGISTER_G4) { 1234 set_sparc_g4(value); 1235 } else if (roffset == STO_SPARC_REGISTER_G5) { 1236 set_sparc_g5(value); 1237 } else if (roffset == STO_SPARC_REGISTER_G6) { 1238 set_sparc_g6(value); 1239 } else if (roffset == STO_SPARC_REGISTER_G7) { 1240 set_sparc_g7(value); 1241 } else { 1242 eprintf(LIST(lmp), ERR_FATAL, 1243 MSG_INTL(MSG_REL_BADREG), NAME(lmp), 1244 EC_ADDR(roffset)); 1245 ret = 0; 1246 break; 1247 } 1248 1249 DBG_CALL(Dbg_reloc_apply_reg(LIST(lmp), ELF_DBG_RTLD, 1250 M_MACH, (Xword)roffset, (Xword)value)); 1251 break; 1252 case R_SPARC_COPY: 1253 if (elf_copy_reloc(name, symref, lmp, (void *)roffset, 1254 symdef, _lmp, (const void *)value) == 0) 1255 ret = 0; 1256 break; 1257 case R_SPARC_JMP_SLOT: 1258 pltndx = ((uintptr_t)rel - 1259 (uintptr_t)JMPREL(lmp)) / relsiz; 1260 1261 if (FLAGS(lmp) & FLG_RT_FIXED) 1262 vaddr = 0; 1263 else 1264 vaddr = ADDR(lmp); 1265 1266 if (((LIST(lmp)->lm_tflags | AFLAGS(lmp)) & 1267 (LML_TFLG_AUD_PLTENTER | LML_TFLG_AUD_PLTEXIT)) && 1268 AUDINFO(lmp)->ai_dynplts) { 1269 int fail = 0; 1270 /* LINTED */ 1271 uint_t symndx = (uint_t)(((uintptr_t)symdef - 1272 (uintptr_t)SYMTAB(_lmp)) / SYMENT(_lmp)); 1273 1274 (void) elf_plt_trace_write((caddr_t)vaddr, 1275 (Rela *)rel, lmp, _lmp, symdef, symndx, 1276 pltndx, (caddr_t)value, sb_flags, &fail); 1277 if (fail) 1278 ret = 0; 1279 } else { 1280 /* 1281 * Write standard PLT entry to jump directly 1282 * to newly bound function. 1283 */ 1284 DBG_CALL(Dbg_reloc_apply_val(LIST(lmp), 1285 ELF_DBG_RTLD, (Xword)roffset, 1286 (Xword)value)); 1287 pbtype = elf_plt_write((uintptr_t)vaddr, 1288 (uintptr_t)vaddr, (void *)rel, value, 1289 pltndx); 1290 } 1291 break; 1292 case R_SPARC_WDISP30: 1293 if (PLTPAD(lmp) && 1294 (S_INRANGE((Sxword)value, 29) == 0)) { 1295 void * plt = 0; 1296 1297 if (bindpltpad(lmp, &pltpadlist, 1298 value + roffset, &plt, 1299 NAME(_lmp), name) == 0) { 1300 ret = 0; 1301 break; 1302 } 1303 value = (Addr)((Addr)plt - roffset); 1304 } 1305 /* FALLTHROUGH */ 1306 default: 1307 value += reladd; 1308 if (IS_EXTOFFSET(rtype)) 1309 value += (Word)ELF_R_TYPE_DATA(rel->r_info); 1310 1311 /* 1312 * Write the relocation out. If this relocation is a 1313 * common basic write, skip the doreloc() engine. 1314 */ 1315 if ((rtype == R_SPARC_GLOB_DAT) || 1316 (rtype == R_SPARC_64)) { 1317 if (roffset & 0x7) { 1318 Conv_inv_buf_t inv_buf; 1319 1320 eprintf(LIST(lmp), ERR_FATAL, 1321 MSG_INTL(MSG_REL_NONALIGN), 1322 conv_reloc_SPARC_type(rtype, 1323 0, &inv_buf), 1324 NAME(lmp), demangle(name), 1325 EC_OFF(roffset)); 1326 ret = 0; 1327 } else 1328 *(ulong_t *)roffset += value; 1329 } else { 1330 if (do_reloc_rtld(rtype, (uchar_t *)roffset, 1331 (Xword *)&value, name, 1332 NAME(lmp), LIST(lmp)) == 0) 1333 ret = 0; 1334 } 1335 1336 /* 1337 * The value now contains the 'bit-shifted' value that 1338 * was or'ed into memory (this was set by 1339 * do_reloc_rtld()). 1340 */ 1341 DBG_CALL(Dbg_reloc_apply_val(LIST(lmp), ELF_DBG_RTLD, 1342 (Xword)roffset, (Xword)value)); 1343 1344 /* 1345 * If this relocation is against a text segment, make 1346 * sure that the instruction cache is flushed. 1347 */ 1348 if (textrel) 1349 iflush_range((caddr_t)roffset, 0x4); 1350 } 1351 1352 if ((ret == 0) && 1353 ((LIST(lmp)->lm_flags & LML_FLG_TRC_WARN) == 0)) 1354 break; 1355 1356 if (binfo) { 1357 DBG_CALL(Dbg_bind_global(lmp, (Addr)roffset, 1358 (Off)(roffset - basebgn), pltndx, pbtype, 1359 _lmp, (Addr)value, symdef->st_value, name, binfo)); 1360 } 1361 } 1362 1363 /* 1364 * Free up any items on the pltpadlist if it was allocated 1365 */ 1366 if (pltpadlist) 1367 free(pltpadlist); 1368 1369 return (relocate_finish(lmp, bound, ret)); 1370 } 1371 1372 /* 1373 * Provide a machine specific interface to the conversion routine. By calling 1374 * the machine specific version, rather than the generic version, we insure that 1375 * the data tables/strings for all known machine versions aren't dragged into 1376 * ld.so.1. 1377 */ 1378 const char * 1379 _conv_reloc_type(uint_t rel) 1380 { 1381 static Conv_inv_buf_t inv_buf; 1382 1383 return (conv_reloc_SPARC_type(rel, 0, &inv_buf)); 1384 } 1385