1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 1988 AT&T 24 * All Rights Reserved 25 * 26 * Copyright 2007 Sun Microsystems, Inc. All rights reserved. 27 * Use is subject to license terms. 28 */ 29 #pragma ident "%Z%%M% %I% %E% SMI" 30 31 32 /* 33 * Run time linker common setup. 34 * 35 * Called from _setup to get the process going at startup. 36 */ 37 #include "_synonyms.h" 38 39 #include <stdlib.h> 40 #include <fcntl.h> 41 #include <stdio.h> 42 #include <sys/types.h> 43 #include <sys/stat.h> 44 #include <sys/mman.h> 45 #include <string.h> 46 #include <stdio.h> 47 #include <unistd.h> 48 #include <dlfcn.h> 49 #include <sys/sysconfig.h> 50 #include <sys/auxv.h> 51 #include <debug.h> 52 #include <conv.h> 53 #include "_rtld.h" 54 #include "_audit.h" 55 #include "_elf.h" 56 #include "_a.out.h" 57 #include "msg.h" 58 59 60 extern int _end, _edata, _etext; 61 extern void _init(void); 62 extern int _brk_unlocked(void *); 63 64 #ifndef SGS_PRE_UNIFIED_PROCESS 65 /* needed for _brk_unlocked() */ 66 void *_nd = &_end; 67 #endif 68 69 /* 70 * Define for the executable's interpreter. 71 * Usually it is ld.so.1, but for the first release of ICL binaries 72 * it is libc.so.1. We keep this information so that we don't end 73 * up mapping libc twice if it is the interpreter. 74 */ 75 static Interp _interp; 76 77 78 static int 79 preload(const char *str, Rt_map *lmp) 80 { 81 Rt_map *clmp = lmp; 82 char *objs, *ptr, *next; 83 Word lmflags = lml_main.lm_flags; 84 uint_t flags; 85 86 DBG_CALL(Dbg_util_nl(&lml_main, DBG_NL_STD)); 87 88 if ((objs = strdup(str)) == 0) 89 return (0); 90 91 /* 92 * Establish the flags for loading each object. If we're called via 93 * lddstub, then the first shared object is the object being inspected 94 * by ldd(1). This object should not be marked as an interposer, as 95 * it is intended to act like the first object of the process. 96 */ 97 if ((lmflags & LML_FLG_TRC_ENABLE) && (FLAGS1(lmp) & FL1_RT_LDDSTUB)) 98 flags = FLG_RT_PRELOAD; 99 else 100 flags = (FLG_RT_PRELOAD | FLG_RT_OBJINTPO); 101 102 ptr = strtok_r(objs, MSG_ORIG(MSG_STR_DELIMIT), &next); 103 do { 104 Pnode *pnp; 105 Rt_map *nlmp = 0; 106 107 DBG_CALL(Dbg_file_preload(&lml_main, ptr)); 108 109 /* 110 * If this a secure application, then preload errors are 111 * reduced to warnings, as the errors are non-fatal. 112 */ 113 if (rtld_flags & RT_FL_SECURE) 114 rtld_flags2 |= RT_FL2_FTL2WARN; 115 if ((pnp = expand_paths(clmp, ptr, PN_SER_EXTLOAD, 0)) != 0) 116 nlmp = load_one(&lml_main, ALO_DATA, pnp, clmp, 117 MODE(lmp), flags, 0); 118 if (pnp) 119 remove_pnode(pnp); 120 if (rtld_flags & RT_FL_SECURE) 121 rtld_flags2 &= ~RT_FL2_FTL2WARN; 122 if (nlmp && (bind_one(clmp, nlmp, BND_NEEDED) == 0)) 123 nlmp = 0; 124 125 /* 126 * Establish state for the next preloadable object. If no 127 * error occurred with loading this object, indicate that this 128 * link-map list contains an interposer. 129 */ 130 flags |= FLG_RT_OBJINTPO; 131 if (nlmp == 0) { 132 if ((lmflags & LML_FLG_TRC_ENABLE) || 133 (rtld_flags & RT_FL_SECURE)) 134 continue; 135 else 136 return (0); 137 } 138 lml_main.lm_flags |= LML_FLG_INTRPOSE; 139 140 /* 141 * If we're tracing shared objects via lddstub, establish a 142 * binding between the initial shared object and lddstub so that 143 * the shared object isn't called out from unused() processing. 144 * After the first object is loaded increment the caller to the 145 * initial preloaded object to provide intuitive ldd -v and -s 146 * diagnostics 147 */ 148 if ((lmflags & LML_FLG_TRC_ENABLE) && 149 (FLAGS1(lmp) & FL1_RT_LDDSTUB)) { 150 if ((lmp == clmp) && (lmflags & 151 (LML_FLG_TRC_UNREF | LML_FLG_TRC_UNUSED))) { 152 if (bind_one(clmp, nlmp, BND_REFER) == 0) 153 continue; 154 } 155 clmp = (Rt_map *)NEXT(lmp); 156 } 157 158 } while ((ptr = strtok_r(NULL, 159 MSG_ORIG(MSG_STR_DELIMIT), &next)) != NULL); 160 161 free(objs); 162 return (1); 163 } 164 165 Rt_map * 166 setup(char **envp, auxv_t *auxv, Word _flags, char *_platform, int _syspagsz, 167 char *_rtldname, Dyn *dyn_ptr, ulong_t ld_base, ulong_t interp_base, int fd, 168 Phdr *phdr, char *execname, char **argv, int dz_fd, uid_t uid, 169 uid_t euid, gid_t gid, gid_t egid, void *aoutdyn, int auxflags, 170 uint_t hwcap_1) 171 { 172 Rt_map *rlmp, *mlmp, **tobj = 0; 173 Ehdr *ehdr; 174 struct stat status; 175 int features = 0, ldsoexec = 0; 176 size_t eaddr, esize; 177 char *str, *argvname; 178 Mmap *mmaps; 179 Word lmflags; 180 181 /* 182 * Now that ld.so has relocated itself, initialize our own 'environ' so 183 * as to establish an address suitable for libc's hardware mul/div 184 * magic (libc/sparc/crt/hwmuldiv.o). 185 */ 186 _environ = (char **)((ulong_t)auxv - sizeof (char *)); 187 _init(); 188 _environ = envp; 189 190 /* 191 * Far the most common application execution revolves around appending 192 * the application name to the users PATH definition, thus a full name 193 * is passed to exec() which will in turn be returned via 194 * AT_SUN_EXECNAME. Applications may also be invoked from the current 195 * working directory, or via a relative name. 196 * 197 * Determine whether the kernel has supplied a AT_SUN_EXECNAME aux 198 * vector. This vector points to the full pathname, on the stack, of 199 * the object that started the process. If this is null, then 200 * AT_SUN_EXECNAME isn't supported (if the pathname exceeded the system 201 * limit (PATH_MAX) the exec would have failed). This flag is used to 202 * determine whether we can call resolvepath(). 203 */ 204 if (execname) 205 rtld_flags |= RT_FL_EXECNAME; 206 207 /* 208 * Determine how ld.so.1 has been executed. 209 */ 210 if ((fd == -1) && (phdr == 0)) { 211 /* 212 * If we received neither the AT_EXECFD nor the AT_PHDR aux 213 * vector, ld.so.1 must have been invoked directly from the 214 * command line. 215 */ 216 ldsoexec = 1; 217 218 /* 219 * AT_SUN_EXECNAME provides the most precise name, if it is 220 * available, otherwise fall back to argv[0]. At this time, 221 * there is no process name. 222 */ 223 if (execname) 224 rtldname = execname; 225 else if (argv[0]) 226 rtldname = argv[0]; 227 else 228 rtldname = (char *)MSG_INTL(MSG_STR_UNKNOWN); 229 } else { 230 /* 231 * Otherwise, we have a standard process. AT_SUN_EXECNAME 232 * provides the most precise name, if it is available, 233 * otherwise fall back to argv[0]. Provided the application 234 * is already mapped, the process is the application, so 235 * simplify the application name for use in any diagnostics. 236 */ 237 if (execname) 238 argvname = execname; 239 else if (argv[0]) 240 argvname = execname = argv[0]; 241 else 242 argvname = execname = (char *)MSG_INTL(MSG_STR_UNKNOWN); 243 244 if (fd == -1) { 245 if ((str = strrchr(argvname, '/')) != 0) 246 procname = ++str; 247 else 248 procname = argvname; 249 } 250 251 /* 252 * At this point, we don't know the runtime linkers full path 253 * name. The _rtldname passed to us is the SONAME of the 254 * runtime linker, which is typically /lib/ld.so.1 no matter 255 * what the full path is. Use this for now, we'll reset the 256 * runtime linkers name once the application is analyzed. 257 */ 258 if (_rtldname) { 259 if ((str = strrchr(_rtldname, '/')) != 0) 260 rtldname = ++str; 261 else 262 rtldname = _rtldname; 263 } else 264 rtldname = (char *)MSG_INTL(MSG_STR_UNKNOWN); 265 } 266 267 /* 268 * Initialize any global variables. 269 */ 270 at_flags = _flags; 271 if (dz_fd != FD_UNAVAIL) 272 dz_init(dz_fd); 273 platform = _platform; 274 275 /* 276 * If pagesize is unspecified find its value. 277 */ 278 if ((syspagsz = _syspagsz) == 0) 279 syspagsz = _sysconfig(_CONFIG_PAGESIZE); 280 fmap_setup(); 281 282 /* 283 * Add the unused portion of the last data page to the free space list. 284 * The page size must be set before doing this. Here, _end refers to 285 * the end of the runtime linkers bss. Note that we do not use the 286 * unused data pages from any included .so's to supplement this free 287 * space as badly behaved .os's may corrupt this data space, and in so 288 * doing ruin our data. 289 */ 290 eaddr = S_DROUND((size_t)&_end); 291 esize = eaddr % syspagsz; 292 if (esize) { 293 esize = syspagsz - esize; 294 addfree((void *)eaddr, esize); 295 } 296 297 /* 298 * Establish initial link-map list flags, and link-map list alists. 299 */ 300 if (alist_append(&lml_main.lm_lists, 0, sizeof (Lm_cntl), 301 AL_CNT_LMLISTS) == 0) 302 return (0); 303 lml_main.lm_flags |= LML_FLG_BASELM; 304 lml_main.lm_lmid = LM_ID_BASE; 305 lml_main.lm_lmidstr = (char *)MSG_ORIG(MSG_LMID_BASE); 306 307 if (alist_append(&lml_rtld.lm_lists, 0, sizeof (Lm_cntl), 308 AL_CNT_LMLISTS) == 0) 309 return (0); 310 lml_rtld.lm_flags |= (LML_FLG_RTLDLM | LML_FLG_NOAUDIT | 311 LML_FLG_HOLDLOCK); 312 lml_rtld.lm_lmid = LM_ID_LDSO; 313 lml_rtld.lm_lmidstr = (char *)MSG_ORIG(MSG_LMID_LDSO); 314 315 /* 316 * Determine whether we have a secure executable. 317 */ 318 security(uid, euid, gid, egid, auxflags); 319 320 /* 321 * Initialize a hardware capability descriptor for use in comparing 322 * each loaded object. 323 */ 324 #ifdef AT_SUN_AUXFLAGS 325 if (auxflags & AF_SUN_HWCAPVERIFY) { 326 rtld_flags2 |= RT_FL2_HWCAP; 327 hwcap = (ulong_t)hwcap_1; 328 } 329 #endif 330 /* 331 * Look for environment strings (allows things like LD_NOAUDIT to be 332 * established, although debugging isn't enabled until later). 333 */ 334 if ((readenv_user((const char **)envp, &(lml_main.lm_flags), 335 &(lml_main.lm_tflags), (aoutdyn != 0))) == 1) 336 return (0); 337 338 /* 339 * Create a mapping descriptor for ld.so.1. We can determine our 340 * two segments information from known symbols. 341 */ 342 if ((mmaps = calloc(3, sizeof (Mmap))) == 0) 343 return (0); 344 mmaps[0].m_vaddr = (caddr_t)M_PTRUNC(ld_base); 345 mmaps[0].m_msize = (size_t)((caddr_t)&_etext - mmaps[0].m_vaddr); 346 mmaps[0].m_fsize = mmaps[0].m_msize; 347 mmaps[0].m_perm = (PROT_READ | PROT_EXEC); 348 mmaps[1].m_vaddr = (caddr_t)M_PTRUNC((ulong_t)&r_debug); 349 mmaps[1].m_msize = (size_t)((caddr_t)&_end - mmaps[1].m_vaddr); 350 mmaps[1].m_fsize = (size_t)((caddr_t)&_edata - mmaps[1].m_vaddr); 351 mmaps[1].m_perm = (PROT_READ | PROT_WRITE | PROT_EXEC); 352 353 /* 354 * Create a link map structure for ld.so.1. 355 */ 356 if ((rlmp = elf_new_lm(&lml_rtld, _rtldname, rtldname, dyn_ptr, ld_base, 357 (ulong_t)&_etext, ALO_DATA, (ulong_t)(eaddr - ld_base), 0, ld_base, 358 (ulong_t)(eaddr - ld_base), mmaps, 2)) == 0) { 359 return (0); 360 } 361 362 MODE(rlmp) |= (RTLD_LAZY | RTLD_NODELETE | RTLD_GLOBAL | RTLD_WORLD); 363 FLAGS(rlmp) |= (FLG_RT_ANALYZED | FLG_RT_RELOCED | FLG_RT_INITDONE | 364 FLG_RT_INITCLCT | FLG_RT_FINICLCT | FLG_RT_MODESET); 365 366 /* 367 * Initialize the runtime linkers information. 368 */ 369 interp = &_interp; 370 interp->i_name = NAME(rlmp); 371 interp->i_faddr = (caddr_t)ADDR(rlmp); 372 ldso_plt_init(rlmp); 373 374 /* 375 * If ld.so.1 has been invoked directly, process its arguments. 376 */ 377 if (ldsoexec) { 378 /* 379 * Process any arguments that are specific to ld.so.1, and 380 * reorganize the process stack to effectively remove ld.so.1 381 * from it. Reinitialize the environment pointer, as this may 382 * have been shifted after skipping ld.so.1's arguments. 383 */ 384 if (rtld_getopt(argv, &envp, &auxv, &(lml_main.lm_flags), 385 &(lml_main.lm_tflags), (aoutdyn != 0)) == 1) { 386 eprintf(&lml_main, ERR_NONE, MSG_INTL(MSG_USG_BADOPT)); 387 return (0); 388 } 389 _environ = envp; 390 391 /* 392 * Open the object that ld.so.1 is to execute. 393 */ 394 argvname = execname = argv[0]; 395 396 if ((fd = open(argvname, O_RDONLY)) == -1) { 397 int err = errno; 398 eprintf(&lml_main, ERR_FATAL, MSG_INTL(MSG_SYS_OPEN), 399 argvname, strerror(err)); 400 return (0); 401 } 402 } 403 404 /* 405 * Map in the file, if exec has not already done so. If it has, 406 * simply create a new link map structure for the executable. 407 */ 408 if (fd != -1) { 409 Rej_desc rej; 410 Fct *ftp; 411 412 /* 413 * Find out what type of object we have. 414 */ 415 (void) fstat(fd, &status); 416 if ((ftp = are_u_this(&rej, fd, &status, argvname)) == 0) { 417 Conv_reject_desc_buf_t rej_buf; 418 419 eprintf(&lml_main, ERR_FATAL, 420 MSG_INTL(err_reject[rej.rej_type]), argvname, 421 conv_reject_desc(&rej, &rej_buf)); 422 return (0); 423 } 424 425 /* 426 * Map in object. 427 */ 428 if ((mlmp = (ftp->fct_map_so)(&lml_main, ALO_DATA, execname, 429 argvname, fd)) == 0) 430 return (0); 431 432 /* 433 * We now have a process name for error diagnostics. 434 */ 435 if ((str = strrchr(argvname, '/')) != 0) 436 procname = ++str; 437 else 438 procname = argvname; 439 440 if (ldsoexec) { 441 Addr brkbase = 0; 442 443 /* 444 * Since ld.so.1 was the primary executed object - the 445 * brk() base has not yet been initialized, we need to 446 * initialize it. For an executable, initialize it to 447 * the end of the object. For a shared object (ET_DYN) 448 * initialize it to the first page in memory. 449 */ 450 ehdr = (Ehdr *)ADDR(mlmp); 451 452 if ((FCT(mlmp) == &elf_fct) && 453 (ehdr->e_type == ET_EXEC)) { 454 int i; 455 Phdr *_phdr = (Phdr *)((uintptr_t)ADDR(mlmp) + 456 ehdr->e_phoff); 457 458 /* 459 * We scan the program headers to find the tail 460 * of the memory image. We can't use MSIZE() 461 * since that's already been page aligned. 462 */ 463 for (i = 0; i < ehdr->e_phnum; i++, _phdr++) { 464 if (_phdr->p_type == PT_LOAD) 465 brkbase = _phdr->p_vaddr + 466 _phdr->p_memsz; 467 } 468 } 469 470 if (!brkbase) 471 brkbase = syspagsz; 472 473 if (_brk_unlocked((void *)brkbase) == -1) { 474 int err = errno; 475 eprintf(&lml_main, ERR_FATAL, 476 MSG_INTL(MSG_SYS_BRK), argvname, 477 strerror(err)); 478 } 479 } 480 481 /* 482 * The object has now been mmaped, we no longer need the file 483 * descriptor. 484 */ 485 (void) close(fd); 486 487 } else { 488 /* 489 * Set up function ptr and arguments according to the type 490 * of file class the executable is. (Currently only supported 491 * types are ELF and a.out format.) Then create a link map 492 * for the executable. 493 */ 494 if (aoutdyn) { 495 #ifdef A_OUT 496 if ((mlmp = aout_new_lm(&lml_main, execname, argvname, 497 aoutdyn, 0, 0, ALO_DATA)) == 0) 498 return (0); 499 500 /* 501 * Set the memory size. Note, we only know the end of 502 * text, and although we could find the _end by looking 503 * up the symbol, this may not be present. We should 504 * set ADDR to MAIN_BASE, but presently all the a.out 505 * relocation code assumes ADDR is 0 for the dynamic 506 * executable. (these data items are only used for 507 * dladdr(3x), and there aren't many a.out dladdr(3x) 508 * users to warrant spending much time on this :-). 509 */ 510 MSIZE(mlmp) = MAIN_BASE + ETEXT(mlmp); 511 512 /* 513 * Disable any object configuration cache (BCP apps 514 * bring in sbcp which can benefit from any object 515 * cache, but both the app and sbcp can't use the same 516 * objects). 517 */ 518 rtld_flags |= RT_FL_NOOBJALT; 519 520 /* 521 * Make sure no-direct bindings are in effect. 522 */ 523 lml_main.lm_tflags |= LML_TFLG_NODIRECT; 524 #else 525 eprintf(&lml_main, ERR_FATAL, 526 MSG_INTL(MSG_ERR_REJ_UNKFILE), argvname); 527 return (0); 528 #endif 529 } else if (phdr) { 530 Phdr *pptr, *firstptr = 0, *lastptr; 531 Phdr *tlsphdr = 0, *unwindphdr = 0; 532 Dyn *dyn = 0; 533 Cap *cap = 0; 534 Off i_offset = 0; 535 Addr base = 0; 536 ulong_t memsize, phsize, entry, etext; 537 uint_t mmapcnt = 0; 538 int i; 539 540 /* 541 * Using the executables phdr address determine the base 542 * address of the input file. NOTE, this assumes the 543 * program headers and elf header are part of the same 544 * mapped segment. Although this has held for many 545 * years now, it might be more flexible if the kernel 546 * gave use the ELF headers start address, rather than 547 * the Program headers. 548 * 549 * Determine from the ELF header if we're been called 550 * from a shared object or dynamic executable. If the 551 * latter, then any addresses within the object are used 552 * as is. Addresses within shared objects must be added 553 * to the process's base address. 554 */ 555 ehdr = (Ehdr *)((Addr)phdr - phdr->p_offset); 556 phsize = ehdr->e_phentsize; 557 if (ehdr->e_type == ET_DYN) 558 base = (Addr)ehdr; 559 560 /* 561 * Allocate a mapping array to retain mapped segment 562 * information. 563 */ 564 if ((mmaps = calloc(ehdr->e_phnum, sizeof (Mmap))) == 0) 565 return (0); 566 567 /* 568 * Extract the needed information from the segment 569 * headers. 570 */ 571 for (i = 0, pptr = phdr; i < ehdr->e_phnum; i++) { 572 if (pptr->p_type == PT_INTERP) { 573 i_offset = pptr->p_offset; 574 interp->i_faddr = 575 (caddr_t)interp_base; 576 } 577 if ((pptr->p_type == PT_LOAD) && 578 (pptr->p_filesz || pptr->p_memsz)) { 579 int perm = (PROT_READ | PROT_EXEC); 580 size_t off; 581 582 if (!firstptr) 583 firstptr = pptr; 584 lastptr = pptr; 585 if (i_offset && pptr->p_filesz && 586 (i_offset >= pptr->p_offset) && 587 (i_offset <= 588 (pptr->p_memsz + pptr->p_offset))) { 589 interp->i_name = (char *) 590 pptr->p_vaddr + i_offset - 591 pptr->p_offset + base; 592 i_offset = 0; 593 } 594 if ((pptr->p_flags & 595 (PF_R | PF_W)) == PF_R) 596 etext = pptr->p_vaddr + 597 pptr->p_memsz + base; 598 else 599 perm |= PROT_WRITE; 600 601 /* 602 * Retain segments mapping info. Round 603 * each segment to a page boundary, as 604 * this insures addresses are suitable 605 * for mprotect() if required. 606 */ 607 off = pptr->p_vaddr + base; 608 mmaps[mmapcnt].m_vaddr = 609 (caddr_t)M_PTRUNC(off); 610 off -= (size_t)mmaps[mmapcnt].m_vaddr; 611 mmaps[mmapcnt].m_msize = 612 pptr->p_memsz + off; 613 mmaps[mmapcnt].m_fsize = 614 pptr->p_filesz + off; 615 mmaps[mmapcnt].m_perm = perm; 616 mmapcnt++; 617 618 } else if (pptr->p_type == PT_DYNAMIC) { 619 dyn = (Dyn *)(pptr->p_vaddr + base); 620 } else if ((pptr->p_type == PT_TLS) && 621 pptr->p_memsz) { 622 tlsphdr = pptr; 623 } else if (pptr->p_type == PT_SUNW_UNWIND) { 624 unwindphdr = pptr; 625 } else if (pptr->p_type == PT_SUNWCAP) { 626 cap = (Cap *)(pptr->p_vaddr + base); 627 } 628 pptr = (Phdr *)((ulong_t)pptr + phsize); 629 } 630 631 632 memsize = (lastptr->p_vaddr + lastptr->p_memsz) - 633 S_ALIGN(firstptr->p_vaddr, syspagsz); 634 635 entry = ehdr->e_entry; 636 if (ehdr->e_type == ET_DYN) 637 entry += (ulong_t)ehdr; 638 639 if ((mlmp = elf_new_lm(&lml_main, execname, argvname, 640 dyn, (Addr)ehdr, etext, ALO_DATA, memsize, entry, 641 (ulong_t)ehdr, memsize, mmaps, mmapcnt)) == 0) { 642 return (0); 643 } 644 if (tlsphdr && 645 (tls_assign(&lml_main, mlmp, tlsphdr) == 0)) 646 return (0); 647 648 if (unwindphdr) 649 PTUNWIND(mlmp) = unwindphdr; 650 651 if (cap) 652 cap_assign(cap, mlmp); 653 } 654 } 655 656 /* 657 * Establish the interpretors name as that defined within the initial 658 * object (executable). This provides for ORIGIN processing of ld.so.1 659 * dependencies. 660 */ 661 if (ldsoexec == 0) { 662 size_t len = strlen(interp->i_name); 663 (void) expand(&interp->i_name, &len, 0, 0, 664 (PN_TKN_ISALIST | PN_TKN_HWCAP), rlmp); 665 } 666 PATHNAME(rlmp) = interp->i_name; 667 668 if (FLAGS1(rlmp) & FL1_RT_RELATIVE) 669 (void) fullpath(rlmp, 0); 670 else 671 ORIGNAME(rlmp) = PATHNAME(rlmp) = NAME(rlmp); 672 673 /* 674 * Having established the true runtime linkers name, simplify the name 675 * for error diagnostics. 676 */ 677 if ((str = strrchr(PATHNAME(rlmp), '/')) != 0) 678 rtldname = ++str; 679 else 680 rtldname = PATHNAME(rlmp); 681 682 /* 683 * Expand the fullpath name of the application. This typically occurs 684 * as a part of loading an object, but as the kernel probably mapped 685 * it in, complete this processing now. 686 */ 687 if (FLAGS1(mlmp) & FL1_RT_RELATIVE) 688 (void) fullpath(mlmp, 0); 689 690 /* 691 * Some troublesome programs will change the value of argv[0]. Dupping 692 * the process string protects us, and insures the string is left in 693 * any core files. 694 */ 695 if ((str = (char *)strdup(procname)) == 0) 696 return (0); 697 procname = str; 698 699 /* 700 * If the kernel has provided hardware capabilities information, and 701 * the executable contains hardware capabilities information, make 702 * sure it's a valid object. 703 */ 704 if ((rtld_flags2 & RT_FL2_HWCAP) && HWCAP(mlmp)) { 705 ulong_t mhwcap; 706 707 if ((mhwcap = (HWCAP(mlmp) & ~hwcap)) != 0) { 708 Conv_cap_val_hw1_buf_t cap_val_hw1_buf; 709 710 const char *str = 711 conv_cap_val_hw1(mhwcap, M_MACH, 0, 712 &cap_val_hw1_buf); 713 714 if (lml_main.lm_flags & LML_FLG_TRC_ENABLE) { 715 (void) printf(MSG_INTL(MSG_LDD_GEN_HWCAP_1), 716 NAME(mlmp), str); 717 } else { 718 eprintf(&lml_main, ERR_FATAL, 719 MSG_INTL(MSG_GEN_BADHWCAP_1), str); 720 return (0); 721 } 722 } 723 } 724 725 FLAGS(mlmp) |= (FLG_RT_ISMAIN | FLG_RT_MODESET); 726 FLAGS1(mlmp) |= FL1_RT_USED; 727 728 /* 729 * It's the responsibility of MAIN(crt0) to call it's _init and _fini 730 * section, therefore null out any INIT/FINI so that this object isn't 731 * collected during tsort processing. And, if the application has no 732 * initarray or finiarray we can economize on establishing bindings. 733 */ 734 INIT(mlmp) = FINI(mlmp) = 0; 735 if ((INITARRAY(mlmp) == 0) && (FINIARRAY(mlmp) == 0)) 736 FLAGS1(mlmp) |= FL1_RT_NOINIFIN; 737 738 /* 739 * Identify lddstub if necessary. 740 */ 741 if (lml_main.lm_flags & LML_FLG_TRC_LDDSTUB) 742 FLAGS1(mlmp) |= FL1_RT_LDDSTUB; 743 744 /* 745 * Retain our argument information for use in dlinfo. 746 */ 747 argsinfo.dla_argv = argv--; 748 argsinfo.dla_argc = (long)*argv; 749 argsinfo.dla_envp = envp; 750 argsinfo.dla_auxv = auxv; 751 752 (void) enter(); 753 754 /* 755 * Add our two main link-maps to the dynlm_list 756 */ 757 if (list_append(&dynlm_list, &lml_main) == 0) 758 return (0); 759 760 if (list_append(&dynlm_list, &lml_rtld) == 0) 761 return (0); 762 763 /* 764 * Reset the link-map counts for both lists. The init count is used to 765 * track how many objects have pending init sections, this gets incre- 766 * mented each time an object is relocated. Since ld.so.1 relocates 767 * itself, it's init count will remain zero. 768 * The object count is used to track how many objects have pending fini 769 * sections, as ld.so.1 handles its own fini we can zero its count. 770 */ 771 lml_main.lm_obj = 1; 772 lml_rtld.lm_obj = 0; 773 774 /* 775 * Initialize debugger information structure. Some parts of this 776 * structure were initialized statically. 777 */ 778 r_debug.rtd_rdebug.r_map = (Link_map *)lml_main.lm_head; 779 r_debug.rtd_rdebug.r_ldsomap = (Link_map *)lml_rtld.lm_head; 780 r_debug.rtd_rdebug.r_ldbase = r_debug.rtd_rdebug.r_ldsomap->l_addr; 781 r_debug.rtd_dynlmlst = &dynlm_list; 782 783 if (platform) 784 platform_sz = strlen(platform); 785 786 /* 787 * Determine the dev/inode information for the executable to complete 788 * load_so() checking for those who might dlopen(a.out). 789 */ 790 if ((FLAGS1(mlmp) & FL1_RT_RELATIVE) && 791 (stat(PATHNAME(mlmp), &status) == 0)) { 792 STDEV(mlmp) = status.st_dev; 793 STINO(mlmp) = status.st_ino; 794 } 795 796 /* 797 * Initialize any configuration information. 798 */ 799 if (!(rtld_flags & RT_FL_NOCFG)) { 800 if ((features = elf_config(mlmp, (aoutdyn != 0))) == -1) 801 return (0); 802 } 803 804 /* 805 * Establish the modes of the initial object. These modes are 806 * propagated to any preloaded objects and explicit shared library 807 * dependencies. Note, RTLD_NOW may have been established during 808 * analysis of the application had it been built -z now. 809 */ 810 MODE(mlmp) |= (RTLD_NODELETE | RTLD_GLOBAL | RTLD_WORLD); 811 if (rtld_flags & RT_FL_CONFGEN) 812 MODE(mlmp) |= RTLD_CONFGEN; 813 if ((MODE(mlmp) & RTLD_NOW) == 0) { 814 if (rtld_flags2 & RT_FL2_BINDNOW) 815 MODE(mlmp) |= RTLD_NOW; 816 else 817 MODE(mlmp) |= RTLD_LAZY; 818 } 819 820 /* 821 * If debugging was requested initialize things now that any cache has 822 * been established. A user can specify LD_DEBUG=help to discover the 823 * list of debugging tokens available without running the application. 824 * However, don't allow this setting from a configuration file. 825 * 826 * Note, to prevent recursion issues caused by loading and binding the 827 * debugging libraries themselves, a local debugging descriptor is 828 * initialized. Once the debugging setup has completed, this local 829 * descriptor is copied to the global descriptor which effectively 830 * enables diagnostic output. 831 */ 832 if (rpl_debug || prm_debug) { 833 Dbg_desc _dbg_desc = {0, 0, 0}; 834 835 if (rpl_debug) { 836 uintptr_t ret; 837 838 if ((ret = dbg_setup(rpl_debug, &_dbg_desc)) == S_ERROR) 839 return (0); 840 if (ret == 0) 841 rtldexit(&lml_main, 0); 842 } 843 if (prm_debug) 844 (void) dbg_setup(prm_debug, &_dbg_desc); 845 846 *dbg_desc = _dbg_desc; 847 } 848 849 /* 850 * Now that debugging is enabled generate any diagnostics from any 851 * previous events. 852 */ 853 if (hwcap) 854 DBG_CALL(Dbg_cap_val_hw1(&lml_main, hwcap, M_MACH)); 855 if (features) 856 DBG_CALL(Dbg_file_config_dis(&lml_main, config->c_name, 857 features)); 858 859 if (DBG_ENABLED) { 860 DBG_CALL(Dbg_file_ldso(rlmp, envp, auxv, 861 LIST(rlmp)->lm_lmidstr, ALO_DATA)); 862 863 if (FCT(mlmp) == &elf_fct) { 864 DBG_CALL(Dbg_file_elf(&lml_main, PATHNAME(mlmp), 865 (ulong_t)DYN(mlmp), ADDR(mlmp), MSIZE(mlmp), 866 ENTRY(mlmp), LIST(mlmp)->lm_lmidstr, ALO_DATA)); 867 } else { 868 DBG_CALL(Dbg_file_aout(&lml_main, PATHNAME(mlmp), 869 (ulong_t)AOUTDYN(mlmp), (ulong_t)ADDR(mlmp), 870 (ulong_t)MSIZE(mlmp), LIST(mlmp)->lm_lmidstr, 871 ALO_DATA)); 872 } 873 } 874 875 /* 876 * Enable auditing. 877 */ 878 if (rpl_audit || prm_audit || profile_lib) { 879 int ndx; 880 const char *aud[3]; 881 882 aud[0] = rpl_audit; 883 aud[1] = prm_audit; 884 aud[2] = profile_lib; 885 886 /* 887 * Any global auditing (set using LD_AUDIT or LD_PROFILE) that 888 * can't be established is non-fatal. 889 */ 890 if ((auditors = calloc(1, sizeof (Audit_desc))) == 0) 891 return (0); 892 893 for (ndx = 0; ndx < 3; ndx++) { 894 if (aud[ndx]) { 895 if ((auditors->ad_name = strdup(aud[ndx])) == 0) 896 return (0); 897 rtld_flags2 |= RT_FL2_FTL2WARN; 898 (void) audit_setup(mlmp, auditors, 899 PN_SER_EXTLOAD); 900 rtld_flags2 &= ~RT_FL2_FTL2WARN; 901 } 902 } 903 lml_main.lm_tflags |= auditors->ad_flags; 904 } 905 if (AUDITORS(mlmp)) { 906 /* 907 * Any object required auditing (set with a DT_DEPAUDIT dynamic 908 * entry) that can't be established is fatal. 909 */ 910 if (FLAGS1(mlmp) & FL1_RT_GLOBAUD) { 911 /* 912 * If this object requires global auditing, use the 913 * local auditing information to set the global 914 * auditing descriptor. The effect is that a 915 * DT_DEPAUDIT act as an LD_AUDIT. 916 */ 917 if ((auditors == 0) && 918 ((auditors = calloc(1, sizeof (Audit_desc))) == 0)) 919 return (0); 920 921 auditors->ad_name = AUDITORS(mlmp)->ad_name; 922 if (audit_setup(mlmp, auditors, 0) == 0) 923 return (0); 924 lml_main.lm_tflags |= auditors->ad_flags; 925 926 /* 927 * Clear the local auditor information. 928 */ 929 free((void *) AUDITORS(mlmp)); 930 AUDITORS(mlmp) = 0; 931 932 } else { 933 /* 934 * Establish any local auditing. 935 */ 936 if (audit_setup(mlmp, AUDITORS(mlmp), 0) == 0) 937 return (0); 938 939 FLAGS1(mlmp) |= AUDITORS(mlmp)->ad_flags; 940 lml_main.lm_flags |= LML_FLG_LOCAUDIT; 941 } 942 } 943 944 /* 945 * Explicitly add the initial object and ld.so.1 to those objects being 946 * audited. Note, although the ld.so.1 link-map isn't auditable, 947 * establish a cookie for ld.so.1 as this may be bound to via the 948 * dl*() family. 949 */ 950 if ((lml_main.lm_tflags | FLAGS1(mlmp)) & LML_TFLG_AUD_MASK) { 951 if (((audit_objopen(mlmp, mlmp) == 0) || 952 (audit_objopen(mlmp, rlmp) == 0)) && 953 (FLAGS1(mlmp) & LML_TFLG_AUD_MASK)) 954 return (0); 955 } 956 957 /* 958 * Map in any preloadable shared objects. Note, it is valid to preload 959 * a 4.x shared object with a 5.0 executable (or visa-versa), as this 960 * functionality is required by ldd(1). 961 */ 962 if (rpl_preload && (preload(rpl_preload, mlmp) == 0)) 963 return (0); 964 if (prm_preload && (preload(prm_preload, mlmp) == 0)) 965 return (0); 966 967 /* 968 * Load all dependent (needed) objects. 969 */ 970 if (analyze_lmc(&lml_main, ALO_DATA, mlmp) == 0) 971 return (0); 972 973 /* 974 * Relocate all the dependencies we've just added. 975 * 976 * If this process has been established via crle(1), the environment 977 * variable LD_CONFGEN will have been set. crle(1) may create this 978 * process twice. The first time crle only needs to gather dependency 979 * information. The second time, is to dldump() the images. 980 * 981 * If we're only gathering dependencies, relocation is unnecessary. 982 * As crle(1) may be building an arbitrary family of objects, they may 983 * not fully relocate either. Hence the relocation phase is not carried 984 * out now, but will be called by crle(1) once all objects have been 985 * loaded. 986 */ 987 if ((rtld_flags & RT_FL_CONFGEN) == 0) { 988 989 DBG_CALL(Dbg_util_nl(&lml_main, DBG_NL_STD)); 990 991 if (relocate_lmc(&lml_main, ALO_DATA, mlmp, mlmp) == 0) 992 return (0); 993 994 /* 995 * Inform the debuggers we're here and stable. Newer debuggers 996 * can indicate their presence by setting the DT_DEBUG entry in 997 * the dynamic executable (see elf_new_lm()). In this case call 998 * getpid() so the debugger can catch the system call. This 999 * handshake allows the debugger to initialize, and consequently 1000 * allows the user to set break points in .init code. 1001 */ 1002 rd_event(&lml_main, RD_DLACTIVITY, RT_CONSISTENT); 1003 rd_event(&lml_rtld, RD_DLACTIVITY, RT_CONSISTENT); 1004 1005 if (rtld_flags & RT_FL_DEBUGGER) { 1006 r_debug.rtd_rdebug.r_flags |= RD_FL_ODBG; 1007 (void) getpid(); 1008 } 1009 } 1010 1011 /* 1012 * Indicate preinit activity, and call any auditing routines. These 1013 * routines are called before initializing any threads via libc, or 1014 * before collecting the complete set of .inits on the primary link-map. 1015 * Although most libc interfaces are encapsulated in local routines 1016 * within libc, they have been known to escape (ie. call a .plt). As 1017 * the appcert auditor uses preinit as a trigger to establish some 1018 * external interfaces to the main link-maps libc, we need to activate 1019 * this trigger before exercising any code within libc. Additionally, 1020 * I wouldn't put it past an auditor to add additional objects to the 1021 * primary link-map. Hence, we collect .inits after the audit call. 1022 */ 1023 rd_event(&lml_main, RD_PREINIT, 0); 1024 1025 if ((lml_main.lm_tflags | FLAGS1(mlmp)) & LML_TFLG_AUD_ACTIVITY) 1026 audit_activity(mlmp, LA_ACT_CONSISTENT); 1027 if ((lml_main.lm_tflags | FLAGS1(mlmp)) & LML_TFLG_AUD_PREINIT) 1028 audit_preinit(mlmp); 1029 1030 /* 1031 * If we're creating initial configuration information, we're done 1032 * now that the auditing step has been called. 1033 */ 1034 if (rtld_flags & RT_FL_CONFGEN) { 1035 leave(LIST(mlmp)); 1036 return (mlmp); 1037 } 1038 1039 /* 1040 * Sort the .init sections of all objects we've added. If we're 1041 * tracing we only need to execute this under ldd(1) with the -i or -u 1042 * options. 1043 */ 1044 lmflags = lml_main.lm_flags; 1045 if (((lmflags & LML_FLG_TRC_ENABLE) == 0) || 1046 (lmflags & (LML_FLG_TRC_INIT | LML_FLG_TRC_UNREF))) { 1047 if ((tobj = tsort(mlmp, LIST(mlmp)->lm_init, 1048 RT_SORT_REV)) == (Rt_map **)S_ERROR) 1049 return (0); 1050 } 1051 1052 /* 1053 * If we are tracing we're done. This is the one legitimate use of a 1054 * direct call to rtldexit() rather than return, as we don't want to 1055 * return and jump to the application. 1056 */ 1057 if (lmflags & LML_FLG_TRC_ENABLE) { 1058 unused(&lml_main); 1059 rtldexit(&lml_main, 0); 1060 } 1061 1062 /* 1063 * Establish any static TLS for this primary link-map. Note, regardless 1064 * of whether TLS is available, an initial handshake occurs with libc to 1065 * indicate we're processing the primary link-map. Having identified 1066 * the primary link-map, initialize threads. 1067 */ 1068 if (rt_get_extern(&lml_main, mlmp) == 0) 1069 return (0); 1070 if (tls_statmod(&lml_main, mlmp) == 0) 1071 return (0); 1072 1073 rt_thr_init(&lml_main); 1074 1075 rtld_flags2 |= RT_FL2_PLMSETUP; 1076 rtld_flags |= RT_FL_APPLIC; 1077 1078 /* 1079 * Fire all dependencies .init sections. Identify any unused 1080 * dependencies, and leave the runtime linker - effectively calling 1081 * the dynamic executables entry point. 1082 */ 1083 call_array(PREINITARRAY(mlmp), (uint_t)PREINITARRAYSZ(mlmp), mlmp, 1084 SHT_PREINIT_ARRAY); 1085 1086 if (tobj) 1087 call_init(tobj, DBG_INIT_SORT); 1088 1089 rd_event(&lml_main, RD_POSTINIT, 0); 1090 1091 unused(&lml_main); 1092 1093 DBG_CALL(Dbg_util_call_main(mlmp)); 1094 1095 leave(LIST(mlmp)); 1096 1097 return (mlmp); 1098 } 1099