xref: /titanic_41/usr/src/cmd/sgs/rtld/common/analyze.c (revision b6c3f7863936abeae522e48a13887dddeb691a45)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  *	Copyright (c) 1988 AT&T
24  *	  All Rights Reserved
25  *
26  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
27  * Use is subject to license terms.
28  */
29 #pragma ident	"%Z%%M%	%I%	%E% SMI"
30 
31 #include	"_synonyms.h"
32 
33 #include	<string.h>
34 #include	<stdio.h>
35 #include	<unistd.h>
36 #include	<sys/stat.h>
37 #include	<sys/mman.h>
38 #include	<fcntl.h>
39 #include	<limits.h>
40 #include	<dlfcn.h>
41 #include	<errno.h>
42 #include	<link.h>
43 #include	<debug.h>
44 #include	<conv.h>
45 #include	"_rtld.h"
46 #include	"_audit.h"
47 #include	"_elf.h"
48 #include	"msg.h"
49 
50 static Fct	*vector[] = {
51 	&elf_fct,
52 #ifdef A_OUT
53 	&aout_fct,
54 #endif
55 	0
56 };
57 
58 /*
59  * If a load filter flag is in effect, and this object is a filter, trigger the
60  * loading of all its filtees.  The load filter flag is in effect when creating
61  * configuration files, or when under the control of ldd(1), or the LD_LOADFLTR
62  * environment variable is set, or this object was built with the -zloadfltr
63  * flag.  Otherwise, filtee loading is deferred until triggered by a relocation.
64  */
65 static void
66 load_filtees(Rt_map *lmp)
67 {
68 	if ((FLAGS1(lmp) & MSK_RT_FILTER) &&
69 	    ((FLAGS(lmp) & FLG_RT_LOADFLTR) ||
70 	    (LIST(lmp)->lm_tflags & LML_TFLG_LOADFLTR))) {
71 		Dyninfo		*dip =  DYNINFO(lmp);
72 		uint_t		cnt, max = DYNINFOCNT(lmp);
73 		Slookup		sl;
74 
75 		/*
76 		 * Initialize the symbol lookup data structure.
77 		 */
78 		SLOOKUP_INIT(sl, 0, lmp, lmp, ld_entry_cnt, 0, 0, 0, 0, 0);
79 
80 		for (cnt = 0; cnt < max; cnt++, dip++) {
81 			if (((dip->di_flags & MSK_DI_FILTER) == 0) ||
82 			    ((dip->di_flags & FLG_DI_AUXFLTR) &&
83 			    (rtld_flags & RT_FL_NOAUXFLTR)))
84 				continue;
85 			(void) elf_lookup_filtee(&sl, 0, 0, cnt);
86 		}
87 	}
88 }
89 
90 /*
91  * Analyze one or more link-maps of a link map control list.  This routine is
92  * called at startup to continue the processing of the main executable.  It is
93  * also called each time a new set of objects are loaded, ie. from filters,
94  * lazy-loaded objects, or dlopen().
95  *
96  * In each instance we traverse the link-map control list starting with the
97  * initial object.  As dependencies are analyzed they are added to the link-map
98  * control list.  Thus the list grows as we traverse it - this results in the
99  * breadth first ordering of all needed objects.
100  */
101 int
102 analyze_lmc(Lm_list *lml, Aliste nlmco, Rt_map *nlmp)
103 {
104 	Rt_map	*lmp = nlmp;
105 	Lm_cntl	*nlmc;
106 	int	ret = 1;
107 
108 	/*
109 	 * If this link-map control list is being analyzed, return.  The object
110 	 * that has just been added will be picked up by the existing analysis
111 	 * thread.  Note, this is only really meaningful during process init-
112 	 * ialization, as objects are added to the main link-map control list.
113 	 * Following this initialization, each family of objects that are loaded
114 	 * are added to a new link-map control list.
115 	 */
116 	/* LINTED */
117 	nlmc = (Lm_cntl *)alist_item_by_offset(lml->lm_lists, nlmco);
118 	if (nlmc->lc_flags & LMC_FLG_ANALYZING)
119 		return (1);
120 
121 	/*
122 	 * If this object doesn't belong to the present link-map control list
123 	 * then it must already have been analyzed, or it is in the process of
124 	 * being analyzed prior to us recursing into this analysis.  In either
125 	 * case, ignore the object as it's already being taken care of.
126 	 */
127 	if (nlmco != CNTL(nlmp))
128 		return (1);
129 
130 	nlmc->lc_flags |= LMC_FLG_ANALYZING;
131 
132 	for (; lmp; lmp = (Rt_map *)NEXT(lmp)) {
133 		if (FLAGS(lmp) &
134 		    (FLG_RT_ANALZING | FLG_RT_ANALYZED | FLG_RT_DELETE))
135 			continue;
136 
137 		/*
138 		 * Indicate that analyzing is under way.
139 		 */
140 		FLAGS(lmp) |= FLG_RT_ANALZING;
141 
142 		/*
143 		 * If this link map represents a relocatable object, then we
144 		 * need to finish the link-editing of the object at this point.
145 		 */
146 		if (FLAGS(lmp) & FLG_RT_OBJECT) {
147 			if (elf_obj_fini(lml, lmp) == 0) {
148 				if (lml->lm_flags & LML_FLG_TRC_ENABLE)
149 					continue;
150 				ret = 0;
151 				break;
152 			}
153 		}
154 
155 		DBG_CALL(Dbg_file_analyze(lmp));
156 
157 		/*
158 		 * Establish any dependencies this object requires.
159 		 */
160 		if (LM_NEEDED(lmp)(lml, nlmco, lmp) == 0) {
161 			if (lml->lm_flags & LML_FLG_TRC_ENABLE)
162 				continue;
163 			ret = 0;
164 			break;
165 		}
166 
167 		FLAGS(lmp) &= ~FLG_RT_ANALZING;
168 		FLAGS(lmp) |= FLG_RT_ANALYZED;
169 
170 		/*
171 		 * If we're building a configuration file, determine if this
172 		 * object is a filter and if so load its filtees.  This
173 		 * traversal is only necessary for crle(1), as typical use of
174 		 * an object will load filters as part of relocation processing.
175 		 */
176 		if (MODE(nlmp) & RTLD_CONFGEN)
177 			load_filtees(lmp);
178 
179 		/*
180 		 * If an interposer has been added, it will have been inserted
181 		 * in the link-map before the link we're presently analyzing.
182 		 * Break out of this analysis loop and return to the head of
183 		 * the link-map control list to analyze the interposer.  Note
184 		 * that this rescan preserves the breadth first loading of
185 		 * dependencies.
186 		 */
187 		/* LINTED */
188 		nlmc = (Lm_cntl *)alist_item_by_offset(lml->lm_lists, nlmco);
189 		if (nlmc->lc_flags & LMC_FLG_REANALYZE) {
190 			nlmc->lc_flags &= ~LMC_FLG_REANALYZE;
191 			lmp = nlmc->lc_head;
192 		}
193 	}
194 
195 	/* LINTED */
196 	nlmc = (Lm_cntl *)alist_item_by_offset(lml->lm_lists, nlmco);
197 	nlmc->lc_flags &= ~LMC_FLG_ANALYZING;
198 
199 	return (ret);
200 }
201 
202 /*
203  * Copy relocation test.  If the symbol definition is within .bss, then it's
204  * zero filled, and as the destination is within .bss, we can skip copying
205  * zero's to zero's.  However, if the destination object has a MOVE table, it's
206  * .bss might contain non-zero data, in which case copy it regardless.
207  */
208 static int
209 copy_zerobits(Rt_map *dlmp, Sym *dsym)
210 {
211 	if ((FLAGS(dlmp) & FLG_RT_MOVE) == 0) {
212 		Mmap	*mmaps;
213 		caddr_t	daddr = (caddr_t)dsym->st_value;
214 
215 		if ((FLAGS(dlmp) & FLG_RT_FIXED) == 0)
216 			daddr += ADDR(dlmp);
217 
218 		for (mmaps = MMAPS(dlmp); mmaps->m_vaddr; mmaps++) {
219 			if ((mmaps->m_fsize != mmaps->m_msize) &&
220 			    (daddr >= (mmaps->m_vaddr + mmaps->m_fsize)) &&
221 			    (daddr < (mmaps->m_vaddr + mmaps->m_msize)))
222 				return (1);
223 		}
224 	}
225 	return (0);
226 }
227 
228 /*
229  * Relocate an individual object.
230  */
231 static int
232 relocate_so(Lm_list *lml, Rt_map *lmp, int *relocated, int now)
233 {
234 	/*
235 	 * If we're running under ldd(1), and haven't been asked to trace any
236 	 * warnings, skip any actual relocation processing.
237 	 */
238 	if (((lml->lm_flags & LML_FLG_TRC_ENABLE) == 0) ||
239 	    (lml->lm_flags & LML_FLG_TRC_WARN)) {
240 
241 		if (relocated)
242 			(*relocated)++;
243 
244 		if ((LM_RELOC(lmp)(lmp, now) == 0) &&
245 		    ((lml->lm_flags & LML_FLG_TRC_ENABLE) == 0))
246 			return (0);
247 	}
248 	return (1);
249 }
250 
251 /*
252  * Relocate the objects on a link-map control list.
253  */
254 static int
255 _relocate_lmc(Lm_list *lml, Rt_map *nlmp, int *relocated)
256 {
257 	Rt_map	*lmp;
258 
259 	for (lmp = nlmp; lmp; lmp = (Rt_map *)NEXT(lmp)) {
260 		/*
261 		 * If this object has already been relocated, we're done.  If
262 		 * this object is being deleted, skip it, there's probably a
263 		 * relocation error somewhere that's causing this deletion.
264 		 */
265 		if (FLAGS(lmp) &
266 		    (FLG_RT_RELOCING | FLG_RT_RELOCED | FLG_RT_DELETE))
267 			continue;
268 
269 		/*
270 		 * Indicate that relocation processing is under way.
271 		 */
272 		FLAGS(lmp) |= FLG_RT_RELOCING;
273 
274 		/*
275 		 * Relocate the object.
276 		 */
277 		if (relocate_so(lml, lmp, relocated, 0) == 0)
278 			return (0);
279 
280 		/*
281 		 * Indicate that the objects relocation is complete.
282 		 */
283 		FLAGS(lmp) &= ~FLG_RT_RELOCING;
284 		FLAGS(lmp) |= FLG_RT_RELOCED;
285 
286 		/*
287 		 * Mark this object's init is available for harvesting.  Under
288 		 * ldd(1) this marking is necessary for -i (tsort) gathering.
289 		 */
290 		lml->lm_init++;
291 		lml->lm_flags |= LML_FLG_OBJADDED;
292 
293 		/*
294 		 * Process any move data (not necessary under ldd()).
295 		 */
296 		if ((FLAGS(lmp) & FLG_RT_MOVE) &&
297 		    ((lml->lm_flags & LML_FLG_TRC_ENABLE) == 0))
298 			move_data(lmp);
299 
300 		/*
301 		 * Determine if this object is a filter, and if a load filter
302 		 * flag is in effect, trigger the loading of all its filtees.
303 		 */
304 		load_filtees(lmp);
305 	}
306 
307 	/*
308 	 * Perform special copy relocations.  These are only meaningful for
309 	 * dynamic executables (fixed and head of their link-map list).  If
310 	 * this ever has to change then the infrastructure of COPY() has to
311 	 * change. Presently, a given link map can only have a receiver or
312 	 * supplier of copy data, so a union is used to overlap the storage
313 	 * for the COPY_R() and COPY_S() lists. These lists would need to
314 	 * be separated.
315 	 */
316 	if ((FLAGS(nlmp) & FLG_RT_FIXED) && (nlmp == LIST(nlmp)->lm_head) &&
317 	    (((lml->lm_flags & LML_FLG_TRC_ENABLE) == 0) ||
318 	    (lml->lm_flags & LML_FLG_TRC_WARN))) {
319 		Rt_map		*lmp;
320 		Aliste		idx1;
321 		Word		tracing;
322 
323 #if	defined(__i386)
324 		if (elf_copy_gen(nlmp) == 0)
325 			return (0);
326 #endif
327 		if (COPY_S(nlmp) == NULL)
328 			return (1);
329 
330 		if ((LIST(nlmp)->lm_flags & LML_FLG_TRC_ENABLE) &&
331 		    (((rtld_flags & RT_FL_SILENCERR) == 0) ||
332 		    (LIST(nlmp)->lm_flags & LML_FLG_TRC_VERBOSE)))
333 			tracing = 1;
334 		else
335 			tracing = 0;
336 
337 		DBG_CALL(Dbg_util_nl(lml, DBG_NL_STD));
338 
339 		for (APLIST_TRAVERSE(COPY_S(nlmp), idx1, lmp)) {
340 			Rel_copy	*rcp;
341 			Aliste		idx2;
342 
343 			for (ALIST_TRAVERSE(COPY_R(lmp), idx2, rcp)) {
344 				int zero;
345 
346 				/*
347 				 * Only copy the bits if it's from non-zero
348 				 * filled memory.
349 				 */
350 				zero = copy_zerobits(rcp->r_dlmp, rcp->r_dsym);
351 				DBG_CALL(Dbg_reloc_copy(rcp->r_dlmp, nlmp,
352 				    rcp->r_name, zero));
353 				if (zero)
354 					continue;
355 
356 				(void) memcpy(rcp->r_radd, rcp->r_dadd,
357 				    rcp->r_size);
358 
359 				if ((tracing == 0) || ((FLAGS1(rcp->r_dlmp) &
360 				    FL1_RT_DISPREL) == 0))
361 					continue;
362 
363 				(void) printf(MSG_INTL(MSG_LDD_REL_CPYDISP),
364 				    demangle(rcp->r_name), NAME(rcp->r_dlmp));
365 			}
366 		}
367 
368 		DBG_CALL(Dbg_util_nl(lml, DBG_NL_STD));
369 
370 		free(COPY_S(nlmp));
371 		COPY_S(nlmp) = 0;
372 	}
373 	return (1);
374 }
375 
376 int
377 relocate_lmc(Lm_list *lml, Aliste nlmco, Rt_map *clmp, Rt_map *nlmp)
378 {
379 	int	lret = 1, pret = 1;
380 	APlist	*alp;
381 	Aliste	plmco;
382 	Lm_cntl	*plmc, *nlmc;
383 
384 	/*
385 	 * If this link-map control list is being relocated, return.  The object
386 	 * that has just been added will be picked up by the existing relocation
387 	 * thread.  Note, this is only really meaningful during process init-
388 	 * ialization, as objects are added to the main link-map control list.
389 	 * Following this initialization, each family of objects that are loaded
390 	 * are added to a new link-map control list.
391 	 */
392 	/* LINTED */
393 	nlmc = (Lm_cntl *)alist_item_by_offset(lml->lm_lists, nlmco);
394 
395 	if (nlmc->lc_flags & LMC_FLG_RELOCATING)
396 		return (1);
397 
398 	nlmc->lc_flags |= LMC_FLG_RELOCATING;
399 
400 	/*
401 	 * Relocate one or more link-maps of a link map control list.  If this
402 	 * object doesn't belong to the present link-map control list then it
403 	 * must already have been relocated, or it is in the process of being
404 	 * relocated prior to us recursing into this relocation.  In either
405 	 * case, ignore the object as it's already being taken care of, however,
406 	 * fall through and capture any relocation promotions that might have
407 	 * been established from the reference mode of this object.
408 	 *
409 	 * If we're generating a configuration file using crle(1), two passes
410 	 * may be involved.  Under the first pass, RTLD_CONFGEN is set.  Under
411 	 * this pass, crle() loads objects into the process address space.  No
412 	 * relocation is necessary at this point, we simply need to analyze the
413 	 * objects to insure any directly bound dependencies, filtees, etc.
414 	 * get loaded. Although we skip the relocation, fall through to insure
415 	 * any control lists are maintained appropriately.
416 	 *
417 	 * If objects are to be dldump(3c)'ed, crle(1) makes a second pass,
418 	 * using RTLD_NOW and RTLD_CONFGEN.  The RTLD_NOW effectively carries
419 	 * out the relocations of all loaded objects.
420 	 */
421 	if ((nlmco == CNTL(nlmp)) &&
422 	    ((MODE(nlmp) & (RTLD_NOW | RTLD_CONFGEN)) != RTLD_CONFGEN)) {
423 		int	relocated = 0;
424 
425 		/*
426 		 * Determine whether the initial link-map control list has
427 		 * started relocation.  From this point, should any interposing
428 		 * objects be added to this link-map control list, the objects
429 		 * are demoted to standard objects.  Their interposition can't
430 		 * be guaranteed once relocations have been carried out.
431 		 */
432 		if (nlmco == ALIST_OFF_DATA)
433 			lml->lm_flags |= LML_FLG_STARTREL;
434 
435 		/*
436 		 * Relocate the link-map control list.  Should this relocation
437 		 * fail, clean up this link-map list.  Relocations within this
438 		 * list may have required relocation promotions on other lists,
439 		 * so before acting upon these, and possibly adding more objects
440 		 * to the present link-map control list, try and clean up any
441 		 * failed objects now.
442 		 */
443 		lret = _relocate_lmc(lml, nlmp, &relocated);
444 		if ((lret == 0) && (nlmco != ALIST_OFF_DATA))
445 			remove_lmc(lml, clmp, nlmc, nlmco, NAME(nlmp));
446 	}
447 
448 	/*
449 	 * Determine the new, and previous link-map control lists.
450 	 */
451 	/* LINTED */
452 	nlmc = (Lm_cntl *)alist_item_by_offset(lml->lm_lists, nlmco);
453 	if (nlmco == ALIST_OFF_DATA) {
454 		plmco = nlmco;
455 		plmc = nlmc;
456 	} else {
457 		plmco = nlmco - lml->lm_lists->al_size;
458 		/* LINTED */
459 		plmc = (Lm_cntl *)alist_item_by_offset(lml->lm_lists, plmco);
460 	}
461 
462 	/*
463 	 * Having completed this control list of objects, they can now be bound
464 	 * to from other objects.  Move this control list to the control list
465 	 * that precedes it.  Although this control list may have only bound to
466 	 * controls lists much higher up the control list stack, it must only
467 	 * be moved up one control list so as to preserve the link-map order
468 	 * that may have already been traversed in search of symbols.
469 	 */
470 	if (lret && (nlmco != ALIST_OFF_DATA) && nlmc->lc_head)
471 		lm_move(lml, nlmco, plmco, nlmc, plmc);
472 
473 	/*
474 	 * Determine whether existing objects that have already been relocated,
475 	 * need any additional relocations performed.  This can occur when new
476 	 * objects are loaded with RTLD_NOW, and these new objects have
477 	 * dependencies on objects that are already loaded.  Note, that we peel
478 	 * any relocation promotions off of one control list at a time.  This
479 	 * prevents relocations from being bound to objects that might yet fail
480 	 * to relocate themselves.
481 	 */
482 	while ((alp = plmc->lc_now) != NULL) {
483 		Aliste	idx;
484 		Rt_map	*lmp;
485 
486 		/*
487 		 * Remove the relocation promotion list, as performing more
488 		 * relocations may result in discovering more objects that need
489 		 * promotion.
490 		 */
491 		plmc->lc_now = NULL;
492 
493 		for (APLIST_TRAVERSE(alp, idx, lmp)) {
494 			/*
495 			 * If the original relocation of the link-map control
496 			 * list failed, or one of the relocation promotions of
497 			 * this loop has failed, demote any pending objects
498 			 * relocation mode.
499 			 */
500 			if ((lret == 0) || (pret == 0)) {
501 				MODE(lmp) &= ~RTLD_NOW;
502 				MODE(lmp) |= RTLD_LAZY;
503 				continue;
504 			}
505 
506 			/*
507 			 * If a relocation fails, save the error condition.
508 			 * It's possible that all new objects on the original
509 			 * link-map control list have been relocated
510 			 * successfully, but if the user request requires
511 			 * promoting objects that have already been loaded, we
512 			 * have to indicate that this operation couldn't be
513 			 * performed.  The unrelocated objects are in use on
514 			 * another control list, and may continue to be used.
515 			 * If the .plt that resulted in the error is called,
516 			 * then the process will receive a fatal error at that
517 			 * time.  But, the .plt may never be called.
518 			 */
519 			if (relocate_so(lml, lmp, 0, 1) == 0)
520 				pret = 0;
521 		}
522 
523 		/*
524 		 * Having promoted any objects, determine whether additional
525 		 * dependencies were added, and if so move them to the previous
526 		 * link-map control list.
527 		 */
528 		/* LINTED */
529 		nlmc = (Lm_cntl *)alist_item_by_offset(lml->lm_lists, nlmco);
530 		/* LINTED */
531 		plmc = (Lm_cntl *)alist_item_by_offset(lml->lm_lists, plmco);
532 		if ((nlmco != ALIST_OFF_DATA) && nlmc->lc_head)
533 			lm_move(lml, nlmco, plmco, nlmc, plmc);
534 		free(alp);
535 	}
536 
537 	/*
538 	 * If relocations have been successful, indicate that relocations are
539 	 * no longer active for this control list.  Otherwise, leave the
540 	 * relocation flag, as this flag is used to determine the style of
541 	 * cleanup (see remove_lmc()).
542 	 */
543 	if (lret && pret) {
544 		/* LINTED */
545 		nlmc = (Lm_cntl *)alist_item_by_offset(lml->lm_lists, nlmco);
546 		nlmc->lc_flags &= ~LMC_FLG_RELOCATING;
547 
548 		return (1);
549 	}
550 
551 	return (0);
552 }
553 
554 /*
555  * Inherit the first rejection message for possible later diagnostics.
556  *
557  * Any attempt to process a file that is unsuccessful, should be accompanied
558  * with an error diagnostic.  However, some operations like searching for a
559  * simple filename, involve trying numerous paths, and an error message for each
560  * lookup is not required.  Although a multiple search can fail, it's possible
561  * that a file was found, but was rejected because it was the wrong type.
562  * To satisfy these possibilities, the first failure is recorded as a rejection
563  * message, and this message is used later for a more specific diagnostic.
564  *
565  * File searches are focused at load_one(), and from here a rejection descriptor
566  * is passed down to various child routines.  If these child routines can
567  * process multiple files, then they will maintain their own rejection desc-
568  * riptor.  This is filled in for any failures, and a diagnostic produced to
569  * reflect the failure.  The child routines then employ rejection_inherit() to
570  * pass the first rejection message back to load_one().
571  *
572  * Note that the name, and rejection string must be duplicated, as the name
573  * buffer and error string buffer (see conv_ routines) may be reused for
574  * additional processing or rejection messages.
575  */
576 void
577 rejection_inherit(Rej_desc *rej1, Rej_desc *rej2)
578 {
579 	if (rej2->rej_type && (rej1->rej_type == 0)) {
580 		rej1->rej_type = rej2->rej_type;
581 		rej1->rej_info = rej2->rej_info;
582 		rej1->rej_flag = rej2->rej_flag;
583 		if (rej2->rej_name)
584 			rej1->rej_name = strdup(rej2->rej_name);
585 		if (rej2->rej_str) {
586 			if ((rej1->rej_str = strdup(rej2->rej_str)) == NULL)
587 				rej1->rej_str = MSG_ORIG(MSG_EMG_ENOMEM);
588 		}
589 	}
590 }
591 
592 /*
593  * Determine the object type of a file.
594  */
595 Fct *
596 are_u_this(Rej_desc *rej, int fd, struct stat *status, const char *name)
597 {
598 	int	i;
599 	char	*maddr = 0;
600 
601 	fmap->fm_fsize = status->st_size;
602 
603 	/*
604 	 * If this is a directory (which can't be mmap()'ed) generate a precise
605 	 * error message.
606 	 */
607 	if ((status->st_mode & S_IFMT) == S_IFDIR) {
608 		rej->rej_type = SGS_REJ_STR;
609 		rej->rej_str = strerror(EISDIR);
610 		return (0);
611 	}
612 
613 	/*
614 	 * Map in the first page of the file.  When this buffer is first used,
615 	 * the mapping is a single system page.  This is typically enough to
616 	 * inspect the ehdr and phdrs of the file, and can be reused for each
617 	 * file that get loaded.  If a larger mapping is required to read the
618 	 * ehdr and phdrs, a new mapping is created (see elf_map_it()).  This
619 	 * new mapping is again used for each new file loaded.  Some objects,
620 	 * such as filters, only take up one page, and in this case this mapping
621 	 * will suffice for the file.
622 	 */
623 	maddr = mmap(fmap->fm_maddr, fmap->fm_msize, (PROT_READ | PROT_EXEC),
624 	    fmap->fm_mflags, fd, 0);
625 #if defined(MAP_ALIGN)
626 	if ((maddr == MAP_FAILED) && (errno == EINVAL)) {
627 		/*
628 		 * If the mapping failed, and we used MAP_ALIGN, assume we're
629 		 * on a system that doesn't support this option.  Try again
630 		 * without MAP_ALIGN.
631 		 */
632 		if (fmap->fm_mflags & MAP_ALIGN) {
633 			rtld_flags2 |= RT_FL2_NOMALIGN;
634 			fmap_setup();
635 
636 			maddr = (char *)mmap(fmap->fm_maddr, fmap->fm_msize,
637 			    (PROT_READ | PROT_EXEC), fmap->fm_mflags, fd, 0);
638 		}
639 	}
640 #endif
641 	if (maddr == MAP_FAILED) {
642 		rej->rej_type = SGS_REJ_STR;
643 		rej->rej_str = strerror(errno);
644 		return (0);
645 	}
646 
647 	/*
648 	 * From now on we will re-use fmap->fm_maddr as the mapping address
649 	 * so we augment the flags with MAP_FIXED and drop any MAP_ALIGN.
650 	 */
651 	fmap->fm_maddr = maddr;
652 	fmap->fm_mflags |= MAP_FIXED;
653 #if defined(MAP_ALIGN)
654 	fmap->fm_mflags &= ~MAP_ALIGN;
655 #endif
656 
657 	/*
658 	 * Search through the object vectors to determine what kind of
659 	 * object we have.
660 	 */
661 	for (i = 0; vector[i]; i++) {
662 		if ((vector[i]->fct_are_u_this)(rej))
663 			return (vector[i]);
664 		else if (rej->rej_type) {
665 			Rt_map	*lmp;
666 
667 			/*
668 			 * If this object is an explicitly defined shared
669 			 * object under inspection by ldd, and contains a
670 			 * incompatible hardware capabilities requirement, then
671 			 * inform the user, but continue processing.
672 			 *
673 			 * XXXX - ldd -v for any rej failure.
674 			 */
675 			if ((rej->rej_type == SGS_REJ_HWCAP_1) &&
676 			    (lml_main.lm_flags & LML_FLG_TRC_LDDSTUB) &&
677 			    ((lmp = lml_main.lm_head) != 0) &&
678 			    (FLAGS1(lmp) & FL1_RT_LDDSTUB) &&
679 			    (NEXT(lmp) == 0)) {
680 				(void) printf(MSG_INTL(MSG_LDD_GEN_HWCAP_1),
681 				    name, rej->rej_str);
682 				return (vector[i]);
683 			}
684 			return (0);
685 		}
686 	}
687 
688 	/*
689 	 * Unknown file type.
690 	 */
691 	rej->rej_type = SGS_REJ_UNKFILE;
692 	return (0);
693 }
694 
695 /*
696  * Helper routine for is_so_matched() that consolidates matching a path name,
697  * or file name component of a link-map name.
698  */
699 static int
700 _is_so_matched(const char *name, const char *str, int path)
701 {
702 	const char	*_str;
703 
704 	if ((path == 0) && ((_str = strrchr(str, '/')) != NULL))
705 		_str++;
706 	else
707 		_str = str;
708 
709 	return (strcmp(name, _str));
710 }
711 
712 /*
713  * Determine whether a search name matches one of the names associated with a
714  * link-map.  A link-map contains several names:
715  *
716  *  .	a NAME() - typically the full pathname of an object that has been
717  *	loaded.  For example, when looking for the dependency "libc.so.1", a
718  *	search path is applied, with the eventual NAME() being "/lib/ld.so.1".
719  *	The name of the executable is typically a simple filename, such as
720  *	"main", as this is the name passed to exec() to start the process.
721  *
722  *  .	a PATHNAME() - this is maintained if the resolved NAME() is different
723  * 	to NAME(), ie. the original name is a symbolic link.  This is also
724  * 	the resolved full pathname for a dynamic executable.
725  *
726  *  .	a list of ALIAS() names - these are alternative names by which the
727  *	object has been found, ie. when dependencies are loaded through a
728  * 	variety of different symbolic links.
729  *
730  * The name pattern matching can differ depending on whether we are looking
731  * for a full path name (path != 0), or a simple file name (path == 0).  Full
732  * path names typically match NAME() or PATHNAME() entries, so these link-map
733  * names are inspected first when a full path name is being searched for.
734  * Simple file names typically match ALIAS() names, so these link-map names are
735  * inspected first when a simple file name is being searched for.
736  *
737  * For all full path name searches, the link-map names are taken as is.  For
738  * simple file name searches, only the file name component of any link-map
739  * names are used for comparison.
740  */
741 static Rt_map *
742 is_so_matched(Rt_map *lmp, const char *name, int path)
743 {
744 	Aliste		idx;
745 	const char	*cp;
746 
747 	/*
748 	 * A pathname is typically going to match a NAME() or PATHNAME(), so
749 	 * check these first.
750 	 */
751 	if (path) {
752 		if (strcmp(name, NAME(lmp)) == 0)
753 			return (lmp);
754 
755 		if (PATHNAME(lmp) != NAME(lmp)) {
756 			if (strcmp(name, PATHNAME(lmp)) == 0)
757 				return (lmp);
758 		}
759 	}
760 
761 	/*
762 	 * Typically, dependencies are specified as simple file names
763 	 * (DT_NEEDED == libc.so.1), which are expanded to full pathnames to
764 	 * open the file.  The full pathname is NAME(), and the original name
765 	 * is maintained on the ALIAS() list.
766 	 *
767 	 * If this is a simple filename, or a pathname has failed to match the
768 	 * NAME() and PATHNAME() check above, look through the ALIAS() list.
769 	 */
770 	for (APLIST_TRAVERSE(ALIAS(lmp), idx, cp)) {
771 		/*
772 		 * If we're looking for a simple filename, _is_so_matched()
773 		 * will reduce the ALIAS name to its simple name.
774 		 */
775 		if (_is_so_matched(name, cp, path) == 0)
776 			return (lmp);
777 	}
778 
779 	/*
780 	 * Finally, if this is a simple file name, and any ALIAS() search has
781 	 * been completed, match the simple file name of NAME() and PATHNAME().
782 	 */
783 	if (path == 0) {
784 		if (_is_so_matched(name, NAME(lmp), 0) == 0)
785 			return (lmp);
786 
787 		if (PATHNAME(lmp) != NAME(lmp)) {
788 			if (_is_so_matched(name, PATHNAME(lmp), 0) == 0)
789 				return (lmp);
790 		}
791 	}
792 
793 	return (0);
794 }
795 
796 /*
797  * Files are opened by ld.so.1 to satisfy dependencies, filtees and dlopen()
798  * requests.  Each request investigates the file based upon the callers
799  * environment, and once a full path name has been established a check is made
800  * against the FullpathNode AVL tree and a device/inode check, to ensure the
801  * same file isn't mapped multiple times.  See file_open().
802  *
803  * However, there are one of two cases where a test for an existing file name
804  * needs to be carried out, such as dlopen(NOLOAD) requests, dldump() requests,
805  * and as a final fallback to dependency loading.  These requests are handled
806  * by is_so_loaded().
807  *
808  * A traversal through the callers link-map list is carried out, and from each
809  * link-map, a comparison is made against all of the various names by which the
810  * object has been referenced.  The subroutine, is_so_matched() compares the
811  * link-map names against the name being searched for.  Whether the search name
812  * is a full path name or a simple file name, governs what comparisons are made.
813  *
814  * A full path name, which is a fully resolved path name that starts with a "/"
815  * character, or a relative path name that includes a "/" character, must match
816  * the link-map names explicitly.  A simple file name, which is any name *not*
817  * containing a "/" character, are matched against the file name component of
818  * any link-map names.
819  */
820 Rt_map *
821 is_so_loaded(Lm_list *lml, const char *name)
822 {
823 	Rt_map		*lmp;
824 	avl_index_t	where;
825 	Lm_cntl		*lmc;
826 	Aliste		idx;
827 	int		path = 0;
828 
829 	/*
830 	 * If the name is a full path name, first determine if the path name is
831 	 * registered in the FullpathNode AVL tree.
832 	 */
833 	if ((name[0] == '/') &&
834 	    ((lmp = fpavl_loaded(lml, name, &where)) != NULL) &&
835 	    ((FLAGS(lmp) & (FLG_RT_OBJECT | FLG_RT_DELETE)) == 0))
836 		return (lmp);
837 
838 	/*
839 	 * Determine whether the name is a simple file name, or a path name.
840 	 */
841 	if (strchr(name, '/'))
842 		path++;
843 
844 	/*
845 	 * Loop through the callers link-map lists.
846 	 */
847 	for (ALIST_TRAVERSE(lml->lm_lists, idx, lmc)) {
848 		for (lmp = lmc->lc_head; lmp; lmp = (Rt_map *)NEXT(lmp)) {
849 			if (FLAGS(lmp) & (FLG_RT_OBJECT | FLG_RT_DELETE))
850 				continue;
851 
852 			if (is_so_matched(lmp, name, path))
853 				return (lmp);
854 		}
855 	}
856 	return ((Rt_map *)0);
857 }
858 
859 /*
860  * Tracing is enabled by the LD_TRACE_LOADED_OPTIONS environment variable which
861  * is normally set from ldd(1).  For each link map we load, print the load name
862  * and the full pathname of the shared object.
863  */
864 /* ARGSUSED4 */
865 static void
866 trace_so(Rt_map *clmp, Rej_desc *rej, const char *name, const char *path,
867     int alter, const char *nfound)
868 {
869 	const char	*str = MSG_ORIG(MSG_STR_EMPTY);
870 	const char	*reject = MSG_ORIG(MSG_STR_EMPTY);
871 	char		_reject[PATH_MAX];
872 
873 	/*
874 	 * The first time through trace_so() will only have lddstub on the
875 	 * link-map list and the preloaded shared object is supplied as "path".
876 	 * As we don't want to print this shared object as a dependency, but
877 	 * instead inspect *its* dependencies, return.
878 	 */
879 	if (FLAGS1(clmp) & FL1_RT_LDDSTUB)
880 		return;
881 
882 	/*
883 	 * Without any rejection info, this is a supplied not-found condition.
884 	 */
885 	if (rej && (rej->rej_type == 0)) {
886 		(void) printf(nfound, name);
887 		return;
888 	}
889 
890 	/*
891 	 * If rejection information exists then establish what object was
892 	 * found and the reason for its rejection.
893 	 */
894 	if (rej) {
895 		Conv_reject_desc_buf_t rej_buf;
896 
897 		/* LINTED */
898 		(void) snprintf(_reject, PATH_MAX,
899 		    MSG_INTL(ldd_reject[rej->rej_type]),
900 		    conv_reject_desc(rej, &rej_buf));
901 		if (rej->rej_name)
902 			path = rej->rej_name;
903 		reject = (char *)_reject;
904 
905 		/*
906 		 * Was an alternative pathname defined (from a configuration
907 		 * file).
908 		 */
909 		if (rej->rej_flag & FLG_FD_ALTER)
910 			str = MSG_INTL(MSG_LDD_FIL_ALTER);
911 	} else {
912 		if (alter)
913 			str = MSG_INTL(MSG_LDD_FIL_ALTER);
914 	}
915 
916 	/*
917 	 * If the load name isn't a full pathname print its associated pathname
918 	 * together with all the other information we've gathered.
919 	 */
920 	if (*name == '/')
921 		(void) printf(MSG_ORIG(MSG_LDD_FIL_PATH), path, str, reject);
922 	else
923 		(void) printf(MSG_ORIG(MSG_LDD_FIL_EQUIV), name, path, str,
924 		    reject);
925 }
926 
927 
928 /*
929  * Establish a link-map mode, initializing it if it has just been loaded, or
930  * potentially updating it if it already exists.
931  */
932 int
933 update_mode(Rt_map *lmp, int omode, int nmode)
934 {
935 	Lm_list	*lml = LIST(lmp);
936 	int	pmode = 0;
937 
938 	/*
939 	 * A newly loaded object hasn't had its mode set yet.  Modes are used to
940 	 * load dependencies, so don't propagate any parent or no-load flags, as
941 	 * these would adversely affect this objects ability to load any of its
942 	 * dependencies that aren't already loaded.  RTLD_FIRST is applicable to
943 	 * this objects handle creation only, and should not be propagated.
944 	 */
945 	if ((FLAGS(lmp) & FLG_RT_MODESET) == 0) {
946 		MODE(lmp) |= nmode & ~(RTLD_PARENT | RTLD_NOLOAD | RTLD_FIRST);
947 		FLAGS(lmp) |= FLG_RT_MODESET;
948 		return (1);
949 	}
950 
951 	/*
952 	 * Establish any new overriding modes.  RTLD_LAZY and RTLD_NOW should be
953 	 * represented individually (this is historic, as these two flags were
954 	 * the only flags originally available to dlopen()).  Other flags are
955 	 * accumulative, but have a hierarchy of preference.
956 	 */
957 	if ((omode & RTLD_LAZY) && (nmode & RTLD_NOW)) {
958 		MODE(lmp) &= ~RTLD_LAZY;
959 		pmode |= RTLD_NOW;
960 	}
961 
962 	pmode |= ((~omode & nmode) &
963 	    (RTLD_GLOBAL | RTLD_WORLD | RTLD_NODELETE));
964 	if (pmode) {
965 		DBG_CALL(Dbg_file_mode_promote(lmp, pmode));
966 		MODE(lmp) |= pmode;
967 	}
968 
969 	/*
970 	 * If this load is an RTLD_NOW request and the object has already been
971 	 * loaded non-RTLD_NOW, append this object to the relocation-now list
972 	 * of the objects associated control list.  Note, if the object hasn't
973 	 * yet been relocated, setting its MODE() to RTLD_NOW will establish
974 	 * full relocation processing when it eventually gets relocated.
975 	 */
976 	if ((pmode & RTLD_NOW) &&
977 	    (FLAGS(lmp) & (FLG_RT_RELOCED | FLG_RT_RELOCING))) {
978 		Lm_cntl	*lmc;
979 
980 		/* LINTED */
981 		lmc = (Lm_cntl *)alist_item_by_offset(LIST(lmp)->lm_lists,
982 		    CNTL(lmp));
983 		(void) aplist_append(&lmc->lc_now, lmp, AL_CNT_LMNOW);
984 	}
985 
986 #ifdef	SIEBEL_DISABLE
987 	/*
988 	 * For patch backward compatibility the following .init collection
989 	 * is disabled.
990 	 */
991 	if (rtld_flags & RT_FL_DISFIX_1)
992 		return (pmode);
993 #endif
994 
995 	/*
996 	 * If this objects .init has been collected but has not yet been called,
997 	 * it may be necessary to reevaluate the object using tsort().  For
998 	 * example, a new dlopen() hierarchy may bind to uninitialized objects
999 	 * that are already loaded, or a dlopen(RTLD_NOW) can establish new
1000 	 * bindings between already loaded objects that require the tsort()
1001 	 * information be recomputed.  If however, no new objects have been
1002 	 * added to the process, and this object hasn't been promoted, don't
1003 	 * bother reevaluating the .init.  The present tsort() information is
1004 	 * probably as accurate as necessary, and by not establishing a parallel
1005 	 * tsort() we can help reduce the amount of recursion possible between
1006 	 * .inits.
1007 	 */
1008 	if (((FLAGS(lmp) &
1009 	    (FLG_RT_INITCLCT | FLG_RT_INITCALL)) == FLG_RT_INITCLCT) &&
1010 	    ((lml->lm_flags & LML_FLG_OBJADDED) || ((pmode & RTLD_NOW) &&
1011 	    (FLAGS(lmp) & (FLG_RT_RELOCED | FLG_RT_RELOCING))))) {
1012 		FLAGS(lmp) &= ~FLG_RT_INITCLCT;
1013 		LIST(lmp)->lm_init++;
1014 		LIST(lmp)->lm_flags |= LML_FLG_OBJREEVAL;
1015 	}
1016 
1017 	return (pmode);
1018 }
1019 
1020 /*
1021  * Determine whether an alias name already exists, and if not create one.  This
1022  * is typically used to retain dependency names, such as "libc.so.1", which
1023  * would have been expanded to full path names when they were loaded.  The
1024  * full path names (NAME() and possibly PATHNAME()) are maintained as Fullpath
1025  * AVL nodes, and thus would have been matched by fpavl_loaded() during
1026  * file_open().
1027  */
1028 int
1029 append_alias(Rt_map *lmp, const char *str, int *added)
1030 {
1031 	Aliste	idx;
1032 	char	*cp;
1033 
1034 	/*
1035 	 * Determine if this filename is already on the alias list.
1036 	 */
1037 	for (APLIST_TRAVERSE(ALIAS(lmp), idx, cp)) {
1038 		if (strcmp(cp, str) == 0)
1039 			return (1);
1040 	}
1041 
1042 	/*
1043 	 * This is a new alias, append it to the alias list.
1044 	 */
1045 	if ((cp = strdup(str)) == NULL)
1046 		return (0);
1047 
1048 	if (aplist_append(&ALIAS(lmp), cp, AL_CNT_ALIAS) == NULL) {
1049 		free(cp);
1050 		return (0);
1051 	}
1052 	if (added)
1053 		*added = 1;
1054 	return (1);
1055 }
1056 
1057 /*
1058  * Determine whether a file is already loaded by comparing device and inode
1059  * values.
1060  */
1061 static Rt_map *
1062 is_devinode_loaded(struct stat *status, Lm_list *lml, const char *name,
1063     uint_t flags)
1064 {
1065 	Lm_cntl	*lmc;
1066 	Aliste	idx;
1067 
1068 	/*
1069 	 * If this is an auditor, it will have been opened on a new link-map.
1070 	 * To prevent multiple occurrences of the same auditor on multiple
1071 	 * link-maps, search the head of each link-map list and see if this
1072 	 * object is already loaded as an auditor.
1073 	 */
1074 	if (flags & FLG_RT_AUDIT) {
1075 		Lm_list		*lml;
1076 		Listnode	*lnp;
1077 
1078 		for (LIST_TRAVERSE(&dynlm_list, lnp, lml)) {
1079 			Rt_map	*nlmp = lml->lm_head;
1080 
1081 			if (nlmp && ((FLAGS(nlmp) &
1082 			    (FLG_RT_AUDIT | FLG_RT_DELETE)) == FLG_RT_AUDIT) &&
1083 			    (STDEV(nlmp) == status->st_dev) &&
1084 			    (STINO(nlmp) == status->st_ino))
1085 				return (nlmp);
1086 		}
1087 		return ((Rt_map *)0);
1088 	}
1089 
1090 	/*
1091 	 * If the file has been found determine from the new files status
1092 	 * information if this file is actually linked to one we already have
1093 	 * mapped.  This catches symlink names not caught by is_so_loaded().
1094 	 */
1095 	for (ALIST_TRAVERSE(lml->lm_lists, idx, lmc)) {
1096 		Rt_map	*nlmp;
1097 
1098 		for (nlmp = lmc->lc_head; nlmp; nlmp = (Rt_map *)NEXT(nlmp)) {
1099 			if ((FLAGS(nlmp) & FLG_RT_DELETE) ||
1100 			    (FLAGS1(nlmp) & FL1_RT_LDDSTUB))
1101 				continue;
1102 
1103 			if ((STDEV(nlmp) != status->st_dev) ||
1104 			    (STINO(nlmp) != status->st_ino))
1105 				continue;
1106 
1107 			if (lml->lm_flags & LML_FLG_TRC_VERBOSE) {
1108 				/* BEGIN CSTYLED */
1109 				if (*name == '/')
1110 				    (void) printf(MSG_ORIG(MSG_LDD_FIL_PATH),
1111 					name, MSG_ORIG(MSG_STR_EMPTY),
1112 					MSG_ORIG(MSG_STR_EMPTY));
1113 				else
1114 				    (void) printf(MSG_ORIG(MSG_LDD_FIL_EQUIV),
1115 					name, NAME(nlmp),
1116 					MSG_ORIG(MSG_STR_EMPTY),
1117 					MSG_ORIG(MSG_STR_EMPTY));
1118 				/* END CSTYLED */
1119 			}
1120 			return (nlmp);
1121 		}
1122 	}
1123 	return ((Rt_map *)0);
1124 }
1125 
1126 /*
1127  * Generate any error messages indicating a file could not be found.  When
1128  * preloading or auditing a secure application, it can be a little more helpful
1129  * to indicate that a search of secure directories has failed, so adjust the
1130  * messages accordingly.
1131  */
1132 void
1133 file_notfound(Lm_list *lml, const char *name, Rt_map *clmp, uint_t flags,
1134     Rej_desc * rej)
1135 {
1136 	int	secure = 0;
1137 
1138 	if ((rtld_flags & RT_FL_SECURE) &&
1139 	    (flags & (FLG_RT_PRELOAD | FLG_RT_AUDIT)))
1140 		secure++;
1141 
1142 	if (lml->lm_flags & LML_FLG_TRC_ENABLE) {
1143 		/*
1144 		 * Under ldd(1), auxiliary filtees that can't be loaded are
1145 		 * ignored, unless verbose errors are requested.
1146 		 */
1147 		if ((rtld_flags & RT_FL_SILENCERR) &&
1148 		    ((lml->lm_flags & LML_FLG_TRC_VERBOSE) == 0))
1149 			return;
1150 
1151 		if (secure)
1152 			trace_so(clmp, rej, name, 0, 0,
1153 			    MSG_INTL(MSG_LDD_SEC_NFOUND));
1154 		else
1155 			trace_so(clmp, rej, name, 0, 0,
1156 			    MSG_INTL(MSG_LDD_FIL_NFOUND));
1157 		return;
1158 	}
1159 
1160 	if (rej->rej_type) {
1161 		Conv_reject_desc_buf_t rej_buf;
1162 
1163 		eprintf(lml, ERR_FATAL, MSG_INTL(err_reject[rej->rej_type]),
1164 		    rej->rej_name ? rej->rej_name : MSG_INTL(MSG_STR_UNKNOWN),
1165 		    conv_reject_desc(rej, &rej_buf));
1166 		return;
1167 	}
1168 
1169 	if (secure)
1170 		eprintf(lml, ERR_FATAL, MSG_INTL(MSG_SEC_OPEN), name);
1171 	else
1172 		eprintf(lml, ERR_FATAL, MSG_INTL(MSG_SYS_OPEN), name,
1173 		    strerror(ENOENT));
1174 }
1175 
1176 static int
1177 file_open(int err, Lm_list *lml, const char *oname, const char *nname,
1178     Rt_map *clmp, uint_t flags, Fdesc *fdesc, Rej_desc *rej)
1179 {
1180 	struct stat	status;
1181 	Rt_map		*nlmp;
1182 	int		resolved = 0;
1183 
1184 	fdesc->fd_oname = oname;
1185 
1186 	if ((err == 0) && (fdesc->fd_flags & FLG_FD_ALTER))
1187 		DBG_CALL(Dbg_file_config_obj(lml, oname, 0, nname));
1188 
1189 	/*
1190 	 * If we're dealing with a full pathname, determine whether this
1191 	 * pathname is already known.  Other pathnames fall through to the
1192 	 * dev/inode check, as even though the pathname may look the same as
1193 	 * one previously used, the process may have changed directory.
1194 	 */
1195 	if ((err == 0) && (nname[0] == '/')) {
1196 		if ((nlmp = fpavl_loaded(lml, nname,
1197 		    &(fdesc->fd_avlwhere))) != NULL) {
1198 			fdesc->fd_nname = nname;
1199 			fdesc->fd_lmp = nlmp;
1200 			return (1);
1201 		}
1202 	}
1203 
1204 	if ((err == 0) && ((stat(nname, &status)) != -1)) {
1205 		char	path[PATH_MAX];
1206 		int	fd, size, added;
1207 
1208 		/*
1209 		 * If this path has been constructed as part of expanding a
1210 		 * HWCAP directory, ignore any subdirectories.  As this is a
1211 		 * silent failure, where no rejection message is created, free
1212 		 * the original name to simplify the life of the caller.  For
1213 		 * any other reference that expands to a directory, fall through
1214 		 * to construct a meaningful rejection message.
1215 		 */
1216 		if ((flags & FLG_RT_HWCAP) &&
1217 		    ((status.st_mode & S_IFMT) == S_IFDIR)) {
1218 			free((void *)nname);
1219 			return (0);
1220 		}
1221 
1222 		/*
1223 		 * Resolve the filename and determine whether the resolved name
1224 		 * is already known.  Typically, the previous fpavl_loaded()
1225 		 * will have caught this, as both NAME() and PATHNAME() for a
1226 		 * link-map are recorded in the FullNode AVL tree.  However,
1227 		 * instances exist where a file can be replaced (loop-back
1228 		 * mounts, bfu, etc.), and reference is made to the original
1229 		 * file through a symbolic link.  By checking the pathname here,
1230 		 * we don't fall through to the dev/inode check and conclude
1231 		 * that a new file should be loaded.
1232 		 */
1233 		if ((nname[0] == '/') && (rtld_flags & RT_FL_EXECNAME) &&
1234 		    ((size = resolvepath(nname, path, (PATH_MAX - 1))) > 0)) {
1235 			path[size] = '\0';
1236 
1237 			if (strcmp(nname, path)) {
1238 				if ((nlmp =
1239 				    fpavl_loaded(lml, path, 0)) != NULL) {
1240 					added = 0;
1241 
1242 					if (append_alias(nlmp, nname,
1243 					    &added) == 0)
1244 						return (0);
1245 					/* BEGIN CSTYLED */
1246 					if (added)
1247 					    DBG_CALL(Dbg_file_skip(LIST(clmp),
1248 						NAME(nlmp), nname));
1249 					/* END CSTYLED */
1250 					fdesc->fd_nname = nname;
1251 					fdesc->fd_lmp = nlmp;
1252 					return (1);
1253 				}
1254 
1255 				/*
1256 				 * If this pathname hasn't been loaded, save
1257 				 * the resolved pathname so that it doesn't
1258 				 * have to be recomputed as part of fullpath()
1259 				 * processing.
1260 				 */
1261 				if ((fdesc->fd_pname = strdup(path)) == NULL)
1262 					return (0);
1263 				resolved = 1;
1264 			} else {
1265 				/*
1266 				 * If the resolved name doesn't differ from the
1267 				 * original, save it without duplication.
1268 				 * Having fd_pname set indicates that no further
1269 				 * resolvepath processing is necessary.
1270 				 */
1271 				fdesc->fd_pname = nname;
1272 			}
1273 		}
1274 
1275 		if (nlmp = is_devinode_loaded(&status, lml, nname, flags)) {
1276 			if (flags & FLG_RT_AUDIT) {
1277 				/*
1278 				 * If we've been requested to load an auditor,
1279 				 * and an auditor of the same name already
1280 				 * exists, then the original auditor is used.
1281 				 */
1282 				DBG_CALL(Dbg_audit_skip(LIST(clmp),
1283 				    NAME(nlmp), LIST(nlmp)->lm_lmidstr));
1284 			} else {
1285 				/*
1286 				 * Otherwise, if an alternatively named file
1287 				 * has been found for the same dev/inode, add
1288 				 * a new name alias, and insert any alias full
1289 				 * pathname in the link-map lists AVL tree.
1290 				 */
1291 				added = 0;
1292 
1293 				if (append_alias(nlmp, nname, &added) == 0)
1294 					return (0);
1295 				if (added) {
1296 					if ((nname[0] == '/') &&
1297 					    (fpavl_insert(lml, nlmp,
1298 					    nname, 0) == 0))
1299 						return (0);
1300 					DBG_CALL(Dbg_file_skip(LIST(clmp),
1301 					    NAME(nlmp), nname));
1302 				}
1303 			}
1304 
1305 			/*
1306 			 * Record in the file descriptor the existing object
1307 			 * that satisfies this open request.
1308 			 */
1309 			fdesc->fd_nname = nname;
1310 			fdesc->fd_lmp = nlmp;
1311 			return (1);
1312 		}
1313 
1314 		if ((fd = open(nname, O_RDONLY, 0)) == -1) {
1315 			/*
1316 			 * As the file must exist for the previous stat() to
1317 			 * have succeeded, record the error condition.
1318 			 */
1319 			rej->rej_type = SGS_REJ_STR;
1320 			rej->rej_str = strerror(errno);
1321 		} else {
1322 			Fct	*ftp;
1323 
1324 			if ((ftp = are_u_this(rej, fd, &status, nname)) != 0) {
1325 				fdesc->fd_nname = nname;
1326 				fdesc->fd_ftp = ftp;
1327 				fdesc->fd_dev = status.st_dev;
1328 				fdesc->fd_ino = status.st_ino;
1329 				fdesc->fd_fd = fd;
1330 
1331 				/*
1332 				 * Trace that this open has succeeded.
1333 				 */
1334 				if (lml->lm_flags & LML_FLG_TRC_ENABLE) {
1335 					trace_so(clmp, 0, oname, nname,
1336 					    (fdesc->fd_flags & FLG_FD_ALTER),
1337 					    0);
1338 				}
1339 				return (1);
1340 			}
1341 			(void) close(fd);
1342 		}
1343 
1344 	} else if (errno != ENOENT) {
1345 		/*
1346 		 * If the open() failed for anything other than the file not
1347 		 * existing, record the error condition.
1348 		 */
1349 		rej->rej_type = SGS_REJ_STR;
1350 		rej->rej_str = strerror(errno);
1351 	}
1352 
1353 	/*
1354 	 * Indicate any rejection.
1355 	 */
1356 	if (rej->rej_type) {
1357 		/*
1358 		 * If this pathname was resolved and duplicated, remove the
1359 		 * allocated name to simplify the cleanup of the callers.
1360 		 */
1361 		if (resolved) {
1362 			free((void *)fdesc->fd_pname);
1363 			fdesc->fd_pname = NULL;
1364 		}
1365 		rej->rej_name = nname;
1366 		rej->rej_flag = (fdesc->fd_flags & FLG_FD_ALTER);
1367 		DBG_CALL(Dbg_file_rejected(lml, rej));
1368 	}
1369 	return (0);
1370 }
1371 
1372 /*
1373  * Find a full pathname (it contains a "/").
1374  */
1375 int
1376 find_path(Lm_list *lml, const char *oname, Rt_map *clmp, uint_t flags,
1377     Fdesc *fdesc, Rej_desc *rej)
1378 {
1379 	int	err = 0;
1380 
1381 	/*
1382 	 * If directory configuration exists determine if this path is known.
1383 	 */
1384 	if (rtld_flags & RT_FL_DIRCFG) {
1385 		Rtc_obj		*obj;
1386 		const char	*aname;
1387 
1388 		if ((obj = elf_config_ent(oname, (Word)elf_hash(oname),
1389 		    0, &aname)) != 0) {
1390 			/*
1391 			 * If the configuration file states that this path is a
1392 			 * directory, or the path is explicitly defined as
1393 			 * non-existent (ie. a unused platform specific
1394 			 * library), then go no further.
1395 			 */
1396 			if (obj->co_flags & RTC_OBJ_DIRENT) {
1397 				err = EISDIR;
1398 			} else if ((obj->co_flags &
1399 			    (RTC_OBJ_NOEXIST | RTC_OBJ_ALTER)) ==
1400 			    RTC_OBJ_NOEXIST) {
1401 				err = ENOENT;
1402 			} else if ((obj->co_flags & RTC_OBJ_ALTER) &&
1403 			    (rtld_flags & RT_FL_OBJALT) && (lml == &lml_main)) {
1404 				int	ret;
1405 
1406 				fdesc->fd_flags |= FLG_FD_ALTER;
1407 				/*
1408 				 * Attempt to open the alternative path.  If
1409 				 * this fails, and the alternative is flagged
1410 				 * as optional, fall through to open the
1411 				 * original path.
1412 				 */
1413 				DBG_CALL(Dbg_libs_found(lml, aname,
1414 				    FLG_FD_ALTER));
1415 				if (((ret = file_open(0, lml, oname, aname,
1416 				    clmp, flags, fdesc, rej)) != 0) ||
1417 				    ((obj->co_flags & RTC_OBJ_OPTINAL) == 0))
1418 					return (ret);
1419 
1420 				fdesc->fd_flags &= ~FLG_FD_ALTER;
1421 			}
1422 		}
1423 	}
1424 	DBG_CALL(Dbg_libs_found(lml, oname, 0));
1425 	return (file_open(err, lml, oname, oname, clmp, flags, fdesc, rej));
1426 }
1427 
1428 /*
1429  * Find a simple filename (it doesn't contain a "/").
1430  */
1431 static int
1432 _find_file(Lm_list *lml, const char *oname, const char *nname, Rt_map *clmp,
1433     uint_t flags, Fdesc *fdesc, Rej_desc *rej, Pnode *dir, int aflag)
1434 {
1435 	DBG_CALL(Dbg_libs_found(lml, nname, aflag));
1436 	if ((lml->lm_flags & LML_FLG_TRC_SEARCH) &&
1437 	    ((FLAGS1(clmp) & FL1_RT_LDDSTUB) == 0)) {
1438 		(void) printf(MSG_INTL(MSG_LDD_PTH_TRYING), nname, aflag ?
1439 		    MSG_INTL(MSG_LDD_FIL_ALTER) : MSG_ORIG(MSG_STR_EMPTY));
1440 	}
1441 
1442 	/*
1443 	 * If we're being audited tell the audit library of the file we're about
1444 	 * to go search for.  The audit library may offer an alternative
1445 	 * dependency, or indicate that this dependency should be ignored.
1446 	 */
1447 	if ((lml->lm_tflags | FLAGS1(clmp)) & LML_TFLG_AUD_OBJSEARCH) {
1448 		char	*aname = audit_objsearch(clmp, nname, dir->p_orig);
1449 
1450 		if (aname == 0) {
1451 			DBG_CALL(Dbg_audit_terminate(lml, nname));
1452 			return (0);
1453 		}
1454 
1455 		/*
1456 		 * Protect ourselves from auditor mischief, by copying any
1457 		 * alternative name over the present name (the present name is
1458 		 * maintained in a static buffer - see elf_get_so());
1459 		 */
1460 		if (nname != aname)
1461 			(void) strncpy((char *)nname, aname, PATH_MAX);
1462 	}
1463 	return (file_open(0, lml, oname, nname, clmp, flags, fdesc, rej));
1464 }
1465 
1466 static int
1467 find_file(Lm_list *lml, const char *oname, Rt_map *clmp, uint_t flags,
1468     Fdesc *fdesc, Rej_desc *rej, Pnode *dir, Word * strhash, size_t olen)
1469 {
1470 	static Rtc_obj	Obj = { 0 };
1471 	Rtc_obj		*dobj;
1472 	const char	*nname = oname;
1473 
1474 	if (dir->p_name == 0)
1475 		return (0);
1476 	if (dir->p_info) {
1477 		dobj = (Rtc_obj *)dir->p_info;
1478 		if ((dobj->co_flags &
1479 		    (RTC_OBJ_NOEXIST | RTC_OBJ_ALTER)) == RTC_OBJ_NOEXIST)
1480 			return (0);
1481 	} else
1482 		dobj = 0;
1483 
1484 	/*
1485 	 * If configuration information exists see if this directory/file
1486 	 * combination exists.
1487 	 */
1488 	if ((rtld_flags & RT_FL_DIRCFG) &&
1489 	    ((dobj == 0) || (dobj->co_id != 0))) {
1490 		Rtc_obj		*fobj;
1491 		const char	*alt = 0;
1492 
1493 		/*
1494 		 * If this pnode has not yet been searched for in the
1495 		 * configuration file go find it.
1496 		 */
1497 		if (dobj == 0) {
1498 			dobj = elf_config_ent(dir->p_name,
1499 			    (Word)elf_hash(dir->p_name), 0, 0);
1500 			if (dobj == 0)
1501 				dobj = &Obj;
1502 			dir->p_info = (void *)dobj;
1503 
1504 			if ((dobj->co_flags & (RTC_OBJ_NOEXIST |
1505 			    RTC_OBJ_ALTER)) == RTC_OBJ_NOEXIST)
1506 				return (0);
1507 		}
1508 
1509 		/*
1510 		 * If we found a directory search for the file.
1511 		 */
1512 		if (dobj->co_id != 0) {
1513 			if (*strhash == 0)
1514 				*strhash = (Word)elf_hash(nname);
1515 			fobj = elf_config_ent(nname, *strhash,
1516 			    dobj->co_id, &alt);
1517 
1518 			/*
1519 			 * If this object specifically does not exist, or the
1520 			 * object can't be found in a know-all-entries
1521 			 * directory, continue looking.  If the object does
1522 			 * exist determine if an alternative object exists.
1523 			 */
1524 			if (fobj == 0) {
1525 				if (dobj->co_flags & RTC_OBJ_ALLENTS)
1526 					return (0);
1527 			} else {
1528 				if ((fobj->co_flags & (RTC_OBJ_NOEXIST |
1529 				    RTC_OBJ_ALTER)) == RTC_OBJ_NOEXIST)
1530 					return (0);
1531 
1532 				if ((fobj->co_flags & RTC_OBJ_ALTER) &&
1533 				    (rtld_flags & RT_FL_OBJALT) &&
1534 				    (lml == &lml_main)) {
1535 					int	ret;
1536 
1537 					fdesc->fd_flags |= FLG_FD_ALTER;
1538 					/*
1539 					 * Attempt to open the alternative path.
1540 					 * If this fails, and the alternative is
1541 					 * flagged as optional, fall through to
1542 					 * open the original path.
1543 					 */
1544 					ret = _find_file(lml, oname, alt, clmp,
1545 					    flags, fdesc, rej, dir, 1);
1546 					if (ret || ((fobj->co_flags &
1547 					    RTC_OBJ_OPTINAL) == 0))
1548 						return (ret);
1549 
1550 					fdesc->fd_flags &= ~FLG_FD_ALTER;
1551 				}
1552 			}
1553 		}
1554 	}
1555 
1556 	/*
1557 	 * Protect ourselves from building an invalid pathname.
1558 	 */
1559 	if ((olen + dir->p_len + 1) >= PATH_MAX) {
1560 		eprintf(lml, ERR_FATAL, MSG_INTL(MSG_SYS_OPEN), nname,
1561 		    strerror(ENAMETOOLONG));
1562 			return (0);
1563 	}
1564 	if ((nname = (LM_GET_SO(clmp)(dir->p_name, nname))) == 0)
1565 		return (0);
1566 
1567 	return (_find_file(lml, oname, nname, clmp, flags, fdesc, rej, dir, 0));
1568 }
1569 
1570 /*
1571  * A unique file has been opened.  Create a link-map to represent it, and
1572  * process the various names by which it can be referenced.
1573  */
1574 static Rt_map *
1575 load_file(Lm_list *lml, Aliste lmco, Fdesc *fdesc)
1576 {
1577 	const char	*oname = fdesc->fd_oname;
1578 	const char	*nname = fdesc->fd_nname;
1579 	Rt_map		*nlmp;
1580 
1581 	/*
1582 	 * Typically we call fct_map_so() with the full pathname of the opened
1583 	 * file (nname) and the name that started the search (oname), thus for
1584 	 * a typical dependency on libc this would be /usr/lib/libc.so.1 and
1585 	 * libc.so.1 (DT_NEEDED).  The original name is maintained on an ALIAS
1586 	 * list for comparison when bringing in new dependencies.  If the user
1587 	 * specified name as a full path (from a dlopen() for example) then
1588 	 * there's no need to create an ALIAS.
1589 	 */
1590 	if (strcmp(oname, nname) == 0)
1591 		oname = 0;
1592 
1593 	/*
1594 	 * A new file has been opened, now map it into the process.  Close the
1595 	 * original file so as not to accumulate file descriptors.
1596 	 */
1597 	nlmp = ((fdesc->fd_ftp)->fct_map_so)(lml, lmco, nname, oname,
1598 	    fdesc->fd_fd);
1599 	(void) close(fdesc->fd_fd);
1600 	fdesc->fd_fd = 0;
1601 
1602 	if (nlmp == 0)
1603 		return (0);
1604 
1605 	/*
1606 	 * Save the dev/inode information for later comparisons.
1607 	 */
1608 	STDEV(nlmp) = fdesc->fd_dev;
1609 	STINO(nlmp) = fdesc->fd_ino;
1610 
1611 	/*
1612 	 * Insert the names of this link-map into the FullpathNode AVL tree.
1613 	 * Save both the NAME() and PATHNAME() is they differ.
1614 	 *
1615 	 * If this is an OBJECT file, don't insert it yet as this is only a
1616 	 * temporary link-map.  During elf_obj_fini() the final link-map is
1617 	 * created, and its names will be inserted in the FullpathNode AVL
1618 	 * tree at that time.
1619 	 */
1620 	if ((FLAGS(nlmp) & FLG_RT_OBJECT) == 0) {
1621 		/*
1622 		 * Update the objects full path information if necessary.
1623 		 * Note, with pathname expansion in effect, the fd_pname will
1624 		 * be used as PATHNAME().  This allocated string will be freed
1625 		 * should this object be deleted.  However, without pathname
1626 		 * expansion, the fd_name should be freed now, as it is no
1627 		 * longer referenced.
1628 		 */
1629 		if (FLAGS1(nlmp) & FL1_RT_RELATIVE)
1630 			(void) fullpath(nlmp, fdesc->fd_pname);
1631 		else if (fdesc->fd_pname != fdesc->fd_nname)
1632 			free((void *)fdesc->fd_pname);
1633 		fdesc->fd_pname = 0;
1634 
1635 		if ((NAME(nlmp)[0] == '/') && (fpavl_insert(lml, nlmp,
1636 		    NAME(nlmp), fdesc->fd_avlwhere) == 0)) {
1637 			remove_so(lml, nlmp);
1638 			return (0);
1639 		}
1640 		if (((NAME(nlmp)[0] != '/') ||
1641 		    (NAME(nlmp) != PATHNAME(nlmp))) &&
1642 		    (fpavl_insert(lml, nlmp, PATHNAME(nlmp), 0) == 0)) {
1643 			remove_so(lml, nlmp);
1644 			return (0);
1645 		}
1646 	}
1647 
1648 	/*
1649 	 * If we're processing an alternative object reset the original name
1650 	 * for possible $ORIGIN processing.
1651 	 */
1652 	if (fdesc->fd_flags & FLG_FD_ALTER) {
1653 		const char	*odir;
1654 		char		*ndir;
1655 		size_t		olen;
1656 
1657 		FLAGS(nlmp) |= FLG_RT_ALTER;
1658 
1659 		/*
1660 		 * If we were given a pathname containing a slash then the
1661 		 * original name is still in oname.  Otherwise the original
1662 		 * directory is in dir->p_name (which is all we need for
1663 		 * $ORIGIN).
1664 		 */
1665 		if (fdesc->fd_flags & FLG_FD_SLASH) {
1666 			char	*ofil;
1667 
1668 			odir = oname;
1669 			ofil = strrchr(oname, '/');
1670 			olen = ofil - odir + 1;
1671 		} else {
1672 			odir = fdesc->fd_odir;
1673 			olen = strlen(odir) + 1;
1674 		}
1675 
1676 		if ((ndir = (char *)malloc(olen)) == 0) {
1677 			remove_so(lml, nlmp);
1678 			return (0);
1679 		}
1680 		(void) strncpy(ndir, odir, olen);
1681 		ndir[--olen] = '\0';
1682 
1683 		ORIGNAME(nlmp) = ndir;
1684 		DIRSZ(nlmp) = olen;
1685 	}
1686 
1687 	/*
1688 	 * Identify this as a new object.
1689 	 */
1690 	FLAGS(nlmp) |= FLG_RT_NEWLOAD;
1691 
1692 	return (nlmp);
1693 }
1694 
1695 /*
1696  * This function loads the named file and returns a pointer to its link map.
1697  * It is assumed that the caller has already checked that the file is not
1698  * already loaded before calling this function (refer is_so_loaded()).
1699  * Find and open the file, map it into memory, add it to the end of the list
1700  * of link maps and return a pointer to the new link map.  Return 0 on error.
1701  */
1702 static Rt_map *
1703 load_so(Lm_list *lml, Aliste lmco, const char *oname, Rt_map *clmp,
1704     uint_t flags, Fdesc *nfdp, Rej_desc *rej)
1705 {
1706 	char		*name;
1707 	uint_t		slash = 0;
1708 	size_t		olen;
1709 	Fdesc		fdesc = { 0 };
1710 	Pnode		*dir;
1711 
1712 	/*
1713 	 * If the file is the run time linker then it's already loaded.
1714 	 */
1715 	if (interp && (strcmp(oname, NAME(lml_rtld.lm_head)) == 0))
1716 		return (lml_rtld.lm_head);
1717 
1718 	/*
1719 	 * If this isn't a hardware capabilities pathname, which is already a
1720 	 * full, duplicated pathname, determine whether the pathname contains
1721 	 * a slash, and if not determine the input filename (for max path
1722 	 * length verification).
1723 	 */
1724 	if ((flags & FLG_RT_HWCAP) == 0) {
1725 		const char	*str;
1726 
1727 		for (str = oname; *str; str++) {
1728 			if (*str == '/') {
1729 				slash++;
1730 				break;
1731 			}
1732 		}
1733 		if (slash == 0)
1734 			olen = (str - oname) + 1;
1735 	}
1736 
1737 	/*
1738 	 * If we are passed a 'null' link-map this means that this is the first
1739 	 * object to be loaded on this link-map list.  In that case we set the
1740 	 * link-map to ld.so.1's link-map.
1741 	 *
1742 	 * This link-map is referenced to determine what lookup rules to use
1743 	 * when searching for files.  By using ld.so.1's we are defaulting to
1744 	 * ELF look-up rules.
1745 	 *
1746 	 * Note: This case happens when loading the first object onto
1747 	 *	 the plt_tracing link-map.
1748 	 */
1749 	if (clmp == 0)
1750 		clmp = lml_rtld.lm_head;
1751 
1752 	/*
1753 	 * If this path resulted from a $HWCAP specification, then the best
1754 	 * hardware capability object has already been establish, and is
1755 	 * available in the calling file descriptor.  Perform some minor book-
1756 	 * keeping so that we can fall through into common code.
1757 	 */
1758 	if (flags & FLG_RT_HWCAP) {
1759 		/*
1760 		 * If this object is already loaded, we're done.
1761 		 */
1762 		if (nfdp->fd_lmp)
1763 			return (nfdp->fd_lmp);
1764 
1765 		/*
1766 		 * Obtain the avl index for this object.
1767 		 */
1768 		(void) fpavl_loaded(lml, nfdp->fd_nname, &(nfdp->fd_avlwhere));
1769 
1770 		/*
1771 		 * If the name and resolved pathname differ, duplicate the path
1772 		 * name once more to provide for generic cleanup by the caller.
1773 		 */
1774 		if (nfdp->fd_pname && (nfdp->fd_nname != nfdp->fd_pname)) {
1775 			char	*pname;
1776 
1777 			if ((pname = strdup(nfdp->fd_pname)) == NULL)
1778 				return (0);
1779 			nfdp->fd_pname = pname;
1780 		}
1781 	} else if (slash) {
1782 		Rej_desc	_rej = { 0 };
1783 
1784 		*nfdp = fdesc;
1785 		nfdp->fd_flags = FLG_FD_SLASH;
1786 
1787 		if (find_path(lml, oname, clmp, flags, nfdp, &_rej) == 0) {
1788 			rejection_inherit(rej, &_rej);
1789 			return (0);
1790 		}
1791 
1792 		/*
1793 		 * If this object is already loaded, we're done.
1794 		 */
1795 		if (nfdp->fd_lmp)
1796 			return (nfdp->fd_lmp);
1797 
1798 	} else {
1799 		/*
1800 		 * No '/' - for each directory on list, make a pathname using
1801 		 * that directory and filename and try to open that file.
1802 		 */
1803 		Pnode		*dirlist = (Pnode *)0;
1804 		Word		strhash = 0;
1805 #if	!defined(ISSOLOAD_BASENAME_DISABLED)
1806 		Rt_map		*nlmp;
1807 #endif
1808 		DBG_CALL(Dbg_libs_find(lml, oname));
1809 
1810 #if	!defined(ISSOLOAD_BASENAME_DISABLED)
1811 		if ((nlmp = is_so_loaded(lml, oname)))
1812 			return (nlmp);
1813 #endif
1814 		/*
1815 		 * Make sure we clear the file descriptor new name in case the
1816 		 * following directory search doesn't provide any directories
1817 		 * (odd, but this can be forced with a -znodefaultlib test).
1818 		 */
1819 		*nfdp = fdesc;
1820 		for (dir = get_next_dir(&dirlist, clmp, flags); dir;
1821 		    dir = get_next_dir(&dirlist, clmp, flags)) {
1822 			Rej_desc	_rej = { 0 };
1823 
1824 			*nfdp = fdesc;
1825 
1826 			/*
1827 			 * Try and locate this file.  Make sure to clean up
1828 			 * any rejection information should the file have
1829 			 * been found, but not appropriate.
1830 			 */
1831 			if (find_file(lml, oname, clmp, flags, nfdp, &_rej,
1832 			    dir, &strhash, olen) == 0) {
1833 				rejection_inherit(rej, &_rej);
1834 				continue;
1835 			}
1836 
1837 			/*
1838 			 * If this object is already loaded, we're done.
1839 			 */
1840 			if (nfdp->fd_lmp)
1841 				return (nfdp->fd_lmp);
1842 
1843 			nfdp->fd_odir = dir->p_name;
1844 			break;
1845 		}
1846 
1847 		/*
1848 		 * If the file couldn't be loaded, do another comparison of
1849 		 * loaded files using just the basename.  This catches folks
1850 		 * who may have loaded multiple full pathname files (possibly
1851 		 * from setxid applications) to satisfy dependency relationships
1852 		 * (i.e., a file might have a dependency on foo.so.1 which has
1853 		 * already been opened using its full pathname).
1854 		 */
1855 		if (nfdp->fd_nname == NULL)
1856 			return (is_so_loaded(lml, oname));
1857 	}
1858 
1859 	/*
1860 	 * Duplicate the file name so that NAME() is available in core files.
1861 	 * Note, that hardware capability names are already duplicated, but
1862 	 * they get duplicated once more to insure consistent cleanup in the
1863 	 * event of an error condition.
1864 	 */
1865 	if ((name = strdup(nfdp->fd_nname)) == NULL)
1866 		return (0);
1867 
1868 	if (nfdp->fd_nname == nfdp->fd_pname)
1869 		nfdp->fd_nname = nfdp->fd_pname = name;
1870 	else
1871 		nfdp->fd_nname = name;
1872 
1873 	/*
1874 	 * Finish mapping the file and return the link-map descriptor.  Note,
1875 	 * if this request originated from a HWCAP request, re-establish the
1876 	 * fdesc information.  For single paged objects, such as filters, the
1877 	 * original mapping may have been sufficient to capture the file, thus
1878 	 * this mapping needs to be reset to insure it doesn't mistakenly get
1879 	 * unmapped as part of HWCAP cleanup.
1880 	 */
1881 	return (load_file(lml, lmco, nfdp));
1882 }
1883 
1884 /*
1885  * Trace an attempt to load an object.
1886  */
1887 int
1888 load_trace(Lm_list *lml, const char **oname, Rt_map *clmp)
1889 {
1890 	const char	*name = *oname;
1891 
1892 	/*
1893 	 * First generate any ldd(1) diagnostics.
1894 	 */
1895 	if ((lml->lm_flags & (LML_FLG_TRC_VERBOSE | LML_FLG_TRC_SEARCH)) &&
1896 	    ((FLAGS1(clmp) & FL1_RT_LDDSTUB) == 0))
1897 		(void) printf(MSG_INTL(MSG_LDD_FIL_FIND), name, NAME(clmp));
1898 
1899 	/*
1900 	 * If we're being audited tell the audit library of the file we're
1901 	 * about to go search for.
1902 	 */
1903 	if (((lml->lm_tflags | FLAGS1(clmp)) & LML_TFLG_AUD_ACTIVITY) &&
1904 	    (lml == LIST(clmp)))
1905 		audit_activity(clmp, LA_ACT_ADD);
1906 
1907 	if ((lml->lm_tflags | FLAGS1(clmp)) & LML_TFLG_AUD_OBJSEARCH) {
1908 		char	*aname = audit_objsearch(clmp, name, LA_SER_ORIG);
1909 
1910 		/*
1911 		 * The auditor can indicate that this object should be ignored.
1912 		 */
1913 		if (aname == NULL) {
1914 			DBG_CALL(Dbg_audit_terminate(lml, name));
1915 			return (0);
1916 		}
1917 
1918 		/*
1919 		 * Protect ourselves from auditor mischief, by duplicating any
1920 		 * alternative name.  The original name has been allocated from
1921 		 * expand(), so free this allocation before using the audit
1922 		 * alternative.
1923 		 */
1924 		if (name != aname) {
1925 			if ((aname = strdup(aname)) == NULL) {
1926 				eprintf(lml, ERR_FATAL,
1927 				    MSG_INTL(MSG_GEN_AUDITERM), name);
1928 				return (0);
1929 			}
1930 			free((void *)*oname);
1931 			*oname = aname;
1932 		}
1933 	}
1934 	return (1);
1935 }
1936 
1937 /*
1938  * Having loaded an object and created a link-map to describe it, finish
1939  * processing this stage, including verifying any versioning requirements,
1940  * updating the objects mode, creating a handle if necessary, and adding this
1941  * object to existing handles if required.
1942  */
1943 static int
1944 load_finish(Lm_list *lml, const char *name, Rt_map *clmp, int nmode,
1945     uint_t flags, Grp_hdl **hdl, Rt_map *nlmp)
1946 {
1947 	Aliste		idx;
1948 	Grp_hdl		*ghp;
1949 	int		promote;
1950 
1951 	/*
1952 	 * If this dependency is associated with a required version insure that
1953 	 * the version is present in the loaded file.
1954 	 */
1955 	if (((rtld_flags & RT_FL_NOVERSION) == 0) &&
1956 	    (FCT(clmp) == &elf_fct) && VERNEED(clmp) &&
1957 	    (LM_VERIFY_VERS(clmp)(name, clmp, nlmp) == 0))
1958 		return (0);
1959 
1960 	/*
1961 	 * If this object has indicated that it should be isolated as a group
1962 	 * (DT_FLAGS_1 contains DF_1_GROUP - object was built with -B group),
1963 	 * or if the callers direct bindings indicate it should be isolated as
1964 	 * a group (DYNINFO flags contains FLG_DI_GROUP - dependency followed
1965 	 * -zgroupperm), establish the appropriate mode.
1966 	 *
1967 	 * The intent of an object defining itself as a group is to isolate the
1968 	 * relocation of the group within its own members, however, unless
1969 	 * opened through dlopen(), in which case we assume dlsym() will be used
1970 	 * to located symbols in the new object, we still need to associate it
1971 	 * with the caller for it to be bound with.  This is equivalent to a
1972 	 * dlopen(RTLD_GROUP) and dlsym() using the returned handle.
1973 	 */
1974 	if ((FLAGS(nlmp) | flags) & FLG_RT_SETGROUP) {
1975 		nmode &= ~RTLD_WORLD;
1976 		nmode |= RTLD_GROUP;
1977 
1978 		/*
1979 		 * If the object wasn't explicitly dlopen()'ed associate it with
1980 		 * the parent.
1981 		 */
1982 		if ((flags & FLG_RT_HANDLE) == 0)
1983 			nmode |= RTLD_PARENT;
1984 	}
1985 
1986 	/*
1987 	 * Establish new mode and flags.
1988 	 *
1989 	 * For patch backward compatibility, the following use of update_mode()
1990 	 * is disabled.
1991 	 */
1992 #ifdef	SIEBEL_DISABLE
1993 	if (rtld_flags & RT_FL_DISFIX_1)
1994 		promote = MODE(nlmp) |=
1995 		    (nmode & ~(RTLD_PARENT | RTLD_NOLOAD | RTLD_FIRST));
1996 	else
1997 #endif
1998 		promote = update_mode(nlmp, MODE(nlmp), nmode);
1999 
2000 	FLAGS(nlmp) |= flags;
2001 
2002 	/*
2003 	 * If this is a global object, ensure the associated link-map list can
2004 	 * be rescanned for global, lazy dependencies.
2005 	 */
2006 	if (MODE(nlmp) & RTLD_GLOBAL)
2007 		LIST(nlmp)->lm_flags &= ~LML_FLG_NOPENDGLBLAZY;
2008 
2009 	/*
2010 	 * If we've been asked to establish a handle create one for this object.
2011 	 * Or, if this object has already been analyzed, but this reference
2012 	 * requires that the mode of the object be promoted, also create a
2013 	 * handle to propagate the new modes to all this objects dependencies.
2014 	 */
2015 	if (((FLAGS(nlmp) | flags) & FLG_RT_HANDLE) || (promote &&
2016 	    (FLAGS(nlmp) & FLG_RT_ANALYZED))) {
2017 		uint_t	oflags, hflags = 0, cdflags;
2018 
2019 		/*
2020 		 * Establish any flags for the handle (Grp_hdl).
2021 		 *
2022 		 *  .	Use of the RTLD_FIRST flag indicates that only the first
2023 		 *	dependency on the handle (the new object) can be used
2024 		 *	to satisfy dlsym() requests.
2025 		 */
2026 		if (nmode & RTLD_FIRST)
2027 			hflags = GPH_FIRST;
2028 
2029 		/*
2030 		 * Establish the flags for this callers dependency descriptor
2031 		 * (Grp_desc).
2032 		 *
2033 		 *  .	The creation of a handle associated a descriptor for the
2034 		 *	new object and descriptor for the parent (caller).
2035 		 *	Typically, the handle is created for dlopen() or for
2036 		 *	filtering.  A handle may also be created to promote
2037 		 *	the callers modes (RTLD_NOW) to the new object.  In this
2038 		 *	latter case, the handle/descriptor are torn down once
2039 		 *	the mode propagation has occurred.
2040 		 *
2041 		 *  .	Use of the RTLD_PARENT flag indicates that the parent
2042 		 *	can be relocated against.
2043 		 */
2044 		if (((FLAGS(nlmp) | flags) & FLG_RT_HANDLE) == 0)
2045 			cdflags = GPD_PROMOTE;
2046 		else
2047 			cdflags = GPD_PARENT;
2048 		if (nmode & RTLD_PARENT)
2049 			cdflags |= GPD_RELOC;
2050 
2051 		/*
2052 		 * Now that a handle is being created, remove this state from
2053 		 * the object so that it doesn't mistakenly get inherited by
2054 		 * a dependency.
2055 		 */
2056 		oflags = FLAGS(nlmp);
2057 		FLAGS(nlmp) &= ~FLG_RT_HANDLE;
2058 
2059 		DBG_CALL(Dbg_file_hdl_title(DBG_HDL_ADD));
2060 		if ((ghp = hdl_create(lml, nlmp, clmp, hflags,
2061 		    (GPD_DLSYM | GPD_RELOC | GPD_ADDEPS), cdflags)) == 0)
2062 			return (0);
2063 
2064 		/*
2065 		 * Add any dependencies that are already loaded, to the handle.
2066 		 */
2067 		if (hdl_initialize(ghp, nlmp, nmode, promote) == 0)
2068 			return (0);
2069 
2070 		if (hdl)
2071 			*hdl = ghp;
2072 
2073 		/*
2074 		 * If we were asked to create a handle, we're done.
2075 		 */
2076 		if ((oflags | flags) & FLG_RT_HANDLE)
2077 			return (1);
2078 
2079 		/*
2080 		 * If the handle was created to promote modes from the parent
2081 		 * (caller) to the new object, then this relationship needs to
2082 		 * be removed to ensure the handle doesn't prevent the new
2083 		 * objects from being deleted if required.  If the parent is
2084 		 * the only dependency on the handle, then the handle can be
2085 		 * completely removed.  However, the handle may have already
2086 		 * existed, in which case only the parent descriptor can be
2087 		 * deleted from the handle, or at least the GPD_PROMOTE flag
2088 		 * removed from the descriptor.
2089 		 *
2090 		 * Fall through to carry out any group processing.
2091 		 */
2092 		free_hdl(ghp, clmp, GPD_PROMOTE);
2093 	}
2094 
2095 	/*
2096 	 * If the caller isn't part of a group we're done.
2097 	 */
2098 	if (GROUPS(clmp) == NULL)
2099 		return (1);
2100 
2101 	/*
2102 	 * Determine if our caller is already associated with a handle, if so
2103 	 * we need to add this object to any handles that already exist.
2104 	 * Traverse the list of groups our caller is a member of and add this
2105 	 * new link-map to those groups.
2106 	 */
2107 	DBG_CALL(Dbg_file_hdl_title(DBG_HDL_ADD));
2108 	for (APLIST_TRAVERSE(GROUPS(clmp), idx, ghp)) {
2109 		Aliste		idx1;
2110 		Grp_desc	*gdp;
2111 		int		exist;
2112 		Rt_map		*dlmp1;
2113 		APlist		*lmalp = NULL;
2114 
2115 		/*
2116 		 * If the caller doesn't indicate that its dependencies should
2117 		 * be added to a handle, ignore it.  This case identifies a
2118 		 * parent of a dlopen(RTLD_PARENT) request.
2119 		 */
2120 		for (ALIST_TRAVERSE(ghp->gh_depends, idx1, gdp)) {
2121 			if (gdp->gd_depend == clmp)
2122 				break;
2123 		}
2124 		if ((gdp->gd_flags & GPD_ADDEPS) == 0)
2125 			continue;
2126 
2127 		if ((exist = hdl_add(ghp, nlmp,
2128 		    (GPD_DLSYM | GPD_RELOC | GPD_ADDEPS))) == 0)
2129 			return (0);
2130 
2131 		/*
2132 		 * If this member already exists then its dependencies will
2133 		 * have already been processed.
2134 		 */
2135 		if (exist == ALE_EXISTS)
2136 			continue;
2137 
2138 		/*
2139 		 * If the object we've added has just been opened, it will not
2140 		 * yet have been processed for its dependencies, these will be
2141 		 * added on later calls to load_one().  If it doesn't have any
2142 		 * dependencies we're also done.
2143 		 */
2144 		if (((FLAGS(nlmp) & FLG_RT_ANALYZED) == 0) ||
2145 		    (DEPENDS(nlmp) == NULL))
2146 			continue;
2147 
2148 		/*
2149 		 * Otherwise, this object exists and has dependencies, so add
2150 		 * all of its dependencies to the handle were operating on.
2151 		 */
2152 		if (aplist_append(&lmalp, nlmp, AL_CNT_DEPCLCT) == 0)
2153 			return (0);
2154 
2155 		for (APLIST_TRAVERSE(lmalp, idx1, dlmp1)) {
2156 			Aliste		idx2;
2157 			Bnd_desc 	*bdp;
2158 
2159 			/*
2160 			 * Add any dependencies of this dependency to the
2161 			 * dynamic dependency list so they can be further
2162 			 * processed.
2163 			 */
2164 			for (APLIST_TRAVERSE(DEPENDS(dlmp1), idx2, bdp)) {
2165 				Rt_map	*dlmp2 = bdp->b_depend;
2166 
2167 				if ((bdp->b_flags & BND_NEEDED) == 0)
2168 					continue;
2169 
2170 				if (aplist_test(&lmalp, dlmp2,
2171 				    AL_CNT_DEPCLCT) == 0) {
2172 					free(lmalp);
2173 					return (0);
2174 				}
2175 			}
2176 
2177 			if (nlmp == dlmp1)
2178 				continue;
2179 
2180 			if ((exist = hdl_add(ghp, dlmp1,
2181 			    (GPD_DLSYM | GPD_RELOC | GPD_ADDEPS))) != 0) {
2182 				if (exist == ALE_CREATE) {
2183 					(void) update_mode(dlmp1, MODE(dlmp1),
2184 					    nmode);
2185 				}
2186 				continue;
2187 			}
2188 			free(lmalp);
2189 			return (0);
2190 		}
2191 		free(lmalp);
2192 	}
2193 	return (1);
2194 }
2195 
2196 /*
2197  * The central routine for loading shared objects.  Insures ldd() diagnostics,
2198  * handles and any other related additions are all done in one place.
2199  */
2200 static Rt_map *
2201 _load_path(Lm_list *lml, Aliste lmco, const char **oname, Rt_map *clmp,
2202     int nmode, uint_t flags, Grp_hdl ** hdl, Fdesc *nfdp, Rej_desc *rej)
2203 {
2204 	Rt_map		*nlmp;
2205 	const char	*name = *oname;
2206 
2207 	if ((nmode & RTLD_NOLOAD) == 0) {
2208 		/*
2209 		 * If this isn't a noload request attempt to load the file.
2210 		 * Note, the name of the file may be changed by an auditor.
2211 		 */
2212 		if ((load_trace(lml, oname, clmp)) == 0)
2213 			return (0);
2214 
2215 		name = *oname;
2216 
2217 		if ((nlmp = load_so(lml, lmco, name, clmp, flags,
2218 		    nfdp, rej)) == 0)
2219 			return (0);
2220 
2221 		/*
2222 		 * If we've loaded a library which identifies itself as not
2223 		 * being dlopen()'able catch it here.  Let non-dlopen()'able
2224 		 * objects through under RTLD_CONFGEN as they're only being
2225 		 * mapped to be dldump()'ed.
2226 		 */
2227 		if ((rtld_flags & RT_FL_APPLIC) && ((FLAGS(nlmp) &
2228 		    (FLG_RT_NOOPEN | FLG_RT_RELOCED)) == FLG_RT_NOOPEN) &&
2229 		    ((nmode & RTLD_CONFGEN) == 0)) {
2230 			Rej_desc	_rej = { 0 };
2231 
2232 			_rej.rej_name = name;
2233 			_rej.rej_type = SGS_REJ_STR;
2234 			_rej.rej_str = MSG_INTL(MSG_GEN_NOOPEN);
2235 			DBG_CALL(Dbg_file_rejected(lml, &_rej));
2236 			rejection_inherit(rej, &_rej);
2237 			remove_so(lml, nlmp);
2238 			return (0);
2239 		}
2240 	} else {
2241 		/*
2242 		 * If it's a NOLOAD request - check to see if the object
2243 		 * has already been loaded.
2244 		 */
2245 		/* LINTED */
2246 		if (nlmp = is_so_loaded(lml, name)) {
2247 			if ((lml->lm_flags & LML_FLG_TRC_VERBOSE) &&
2248 			    ((FLAGS1(clmp) & FL1_RT_LDDSTUB) == 0)) {
2249 				(void) printf(MSG_INTL(MSG_LDD_FIL_FIND), name,
2250 				    NAME(clmp));
2251 				/* BEGIN CSTYLED */
2252 				if (*name == '/')
2253 				    (void) printf(MSG_ORIG(MSG_LDD_FIL_PATH),
2254 					name, MSG_ORIG(MSG_STR_EMPTY),
2255 					MSG_ORIG(MSG_STR_EMPTY));
2256 				else
2257 				    (void) printf(MSG_ORIG(MSG_LDD_FIL_EQUIV),
2258 					name, NAME(nlmp),
2259 					MSG_ORIG(MSG_STR_EMPTY),
2260 					MSG_ORIG(MSG_STR_EMPTY));
2261 				/* END CSTYLED */
2262 			}
2263 		} else {
2264 			Rej_desc	_rej = { 0 };
2265 
2266 			_rej.rej_name = name;
2267 			_rej.rej_type = SGS_REJ_STR;
2268 			_rej.rej_str = strerror(ENOENT);
2269 			DBG_CALL(Dbg_file_rejected(lml, &_rej));
2270 			rejection_inherit(rej, &_rej);
2271 			return (0);
2272 		}
2273 	}
2274 
2275 	/*
2276 	 * Finish processing this loaded object.
2277 	 */
2278 	if (load_finish(lml, name, clmp, nmode, flags, hdl, nlmp) == 0) {
2279 		FLAGS(nlmp) &= ~FLG_RT_NEWLOAD;
2280 
2281 		/*
2282 		 * If this object has already been analyzed, then it is in use,
2283 		 * so even though this operation has failed, it should not be
2284 		 * torn down.
2285 		 */
2286 		if ((FLAGS(nlmp) & FLG_RT_ANALYZED) == 0)
2287 			remove_so(lml, nlmp);
2288 		return (0);
2289 	}
2290 
2291 	/*
2292 	 * If this object is new, and we're being audited, tell the audit
2293 	 * library of the file we've just opened.  Note, if the new link-map
2294 	 * requires local auditing of its dependencies we also register its
2295 	 * opening.
2296 	 */
2297 	if (FLAGS(nlmp) & FLG_RT_NEWLOAD) {
2298 		FLAGS(nlmp) &= ~FLG_RT_NEWLOAD;
2299 
2300 		if (((lml->lm_tflags | FLAGS1(clmp) | FLAGS1(nlmp)) &
2301 		    LML_TFLG_AUD_MASK) && (((lml->lm_flags |
2302 		    LIST(clmp)->lm_flags) & LML_FLG_NOAUDIT) == 0)) {
2303 			if (audit_objopen(clmp, nlmp) == 0) {
2304 				remove_so(lml, nlmp);
2305 				return (0);
2306 			}
2307 		}
2308 	}
2309 	return (nlmp);
2310 }
2311 
2312 Rt_map *
2313 load_path(Lm_list *lml, Aliste lmco, const char **name, Rt_map *clmp,
2314     int nmode, uint_t flags, Grp_hdl **hdl, Fdesc *cfdp, Rej_desc *rej)
2315 {
2316 	Rt_map	*lmp;
2317 	Fdesc	nfdp = { 0 };
2318 
2319 	/*
2320 	 * If this path resulted from a $HWCAP specification, then the best
2321 	 * hardware capability object has already been establish, and is
2322 	 * available in the calling file descriptor.
2323 	 */
2324 	if (flags & FLG_RT_HWCAP) {
2325 		if (cfdp->fd_lmp == 0) {
2326 			/*
2327 			 * If this object hasn't yet been mapped, re-establish
2328 			 * the file descriptor structure to reflect this objects
2329 			 * original initial page mapping.  Make sure any present
2330 			 * file descriptor mapping is removed before overwriting
2331 			 * the structure.
2332 			 */
2333 #if	defined(MAP_ALIGN)
2334 			if (fmap->fm_maddr &&
2335 			    ((fmap->fm_mflags & MAP_ALIGN) == 0))
2336 #else
2337 			if (fmap->fm_maddr)
2338 #endif
2339 				(void) munmap(fmap->fm_maddr, fmap->fm_msize);
2340 
2341 			*fmap = cfdp->fd_fmap;
2342 		}
2343 		nfdp = *cfdp;
2344 	}
2345 
2346 	lmp = _load_path(lml, lmco, name, clmp, nmode, flags, hdl, &nfdp, rej);
2347 
2348 	/*
2349 	 * If this path originated from a $HWCAP specification, re-establish the
2350 	 * fdesc information.  For single paged objects, such as filters, the
2351 	 * original mapping may have been sufficient to capture the file, thus
2352 	 * this mapping needs to be reset to insure it doesn't mistakenly get
2353 	 * unmapped as part of HWCAP cleanup.
2354 	 */
2355 	if ((flags & FLG_RT_HWCAP) && (cfdp->fd_lmp == 0)) {
2356 		cfdp->fd_fmap.fm_maddr = fmap->fm_maddr;
2357 		cfdp->fd_fmap.fm_mflags = fmap->fm_mflags;
2358 		cfdp->fd_fd = nfdp.fd_fd;
2359 	}
2360 
2361 	return (lmp);
2362 }
2363 
2364 /*
2365  * Load one object from a possible list of objects.  Typically, for requests
2366  * such as NEEDED's, only one object is specified.  However, this object could
2367  * be specified using $ISALIST or $HWCAP, in which case only the first object
2368  * that can be loaded is used (ie. the best).
2369  */
2370 Rt_map *
2371 load_one(Lm_list *lml, Aliste lmco, Pnode *pnp, Rt_map *clmp, int mode,
2372     uint_t flags, Grp_hdl ** hdl)
2373 {
2374 	Rej_desc	rej = { 0 };
2375 	Pnode   	*tpnp;
2376 	const char	*name;
2377 
2378 	for (tpnp = pnp; tpnp && tpnp->p_name; tpnp = tpnp->p_next) {
2379 		Rt_map	*tlmp;
2380 
2381 		/*
2382 		 * A Hardware capabilities requirement can itself expand into
2383 		 * a number of candidates.
2384 		 */
2385 		if (tpnp->p_orig & PN_TKN_HWCAP) {
2386 			if ((tlmp = load_hwcap(lml, lmco, tpnp->p_name, clmp,
2387 			    mode, (flags | FLG_RT_HWCAP), hdl, &rej)) != 0) {
2388 				remove_rej(&rej);
2389 				return (tlmp);
2390 			}
2391 		} else {
2392 			if ((tlmp = load_path(lml, lmco, &tpnp->p_name, clmp,
2393 			    mode, flags, hdl, 0, &rej)) != 0) {
2394 				remove_rej(&rej);
2395 				return (tlmp);
2396 			}
2397 		}
2398 	}
2399 
2400 	/*
2401 	 * If this pathname originated from an expanded token, use the original
2402 	 * for any diagnostic output.
2403 	 */
2404 	if ((name = pnp->p_oname) == 0)
2405 		name = pnp->p_name;
2406 
2407 	file_notfound(lml, name, clmp, flags, &rej);
2408 	remove_rej(&rej);
2409 	return (0);
2410 }
2411 
2412 /*
2413  * Determine whether a symbol is defined as an interposer.
2414  */
2415 int
2416 is_sym_interposer(Rt_map *lmp, Sym *sym)
2417 {
2418 	Syminfo	*sip = SYMINFO(lmp);
2419 
2420 	if (sip) {
2421 		ulong_t	ndx;
2422 
2423 		ndx = (((ulong_t)sym - (ulong_t)SYMTAB(lmp)) / SYMENT(lmp));
2424 		/* LINTED */
2425 		sip = (Syminfo *)((char *)sip + (ndx * SYMINENT(lmp)));
2426 		if (sip->si_flags & SYMINFO_FLG_INTERPOSE)
2427 			return (1);
2428 	}
2429 	return (0);
2430 }
2431 
2432 /*
2433  * While processing direct or group bindings, determine whether the object to
2434  * which we've bound can be interposed upon.  In this context, copy relocations
2435  * are a form of interposition.
2436  */
2437 static Sym *
2438 lookup_sym_interpose(Slookup *slp, Rt_map **dlmp, uint_t *binfo, Lm_list *lml,
2439     Sym *osym)
2440 {
2441 	Rt_map		*lmp;
2442 	Slookup		sl;
2443 
2444 	/*
2445 	 * If we've bound to a copy relocation definition then we need to assign
2446 	 * this binding to the original copy reference.  Fabricate an inter-
2447 	 * position diagnostic, as this is a legitimate form of interposition.
2448 	 */
2449 	if (FLAGS1(*dlmp) & FL1_RT_COPYTOOK) {
2450 		Rel_copy	*rcp;
2451 		Aliste		idx;
2452 
2453 		for (ALIST_TRAVERSE(COPY_R(*dlmp), idx, rcp)) {
2454 			if ((osym == rcp->r_dsym) || (osym->st_value &&
2455 			    (osym->st_value == rcp->r_dsym->st_value))) {
2456 				*dlmp = rcp->r_rlmp;
2457 				*binfo |=
2458 				    (DBG_BINFO_INTERPOSE | DBG_BINFO_COPYREF);
2459 				return (rcp->r_rsym);
2460 			}
2461 		}
2462 	}
2463 
2464 	/*
2465 	 * Prior to Solaris 8, external references from an executable that were
2466 	 * bound to an uninitialized variable (.bss) within a shared object did
2467 	 * not establish a copy relocation.  This was thought to be an
2468 	 * optimization, to prevent copying zero's to zero's.  Typically,
2469 	 * interposition took its course, with the shared object binding to the
2470 	 * executables data definition.
2471 	 *
2472 	 * This scenario can be broken when this old executable runs against a
2473 	 * new shared object that is directly bound.  With no copy-relocation
2474 	 * record, ld.so.1 has no data to trigger the normal vectoring of the
2475 	 * binding to the executable.
2476 	 *
2477 	 * Starting with Solaris 8, a DT_FLAGS entry is written to all objects,
2478 	 * regardless of there being any DF_ flags entries.  Therefore, an
2479 	 * object without this dynamic tag is susceptible to the copy relocation
2480 	 * issue.  If the executable has no DT_FLAGS tag, and contains the same
2481 	 * .bss symbol definition as has been directly bound to, redirect the
2482 	 * binding to the executables data definition.
2483 	 */
2484 	lmp = lml->lm_head;
2485 	sl = *slp;
2486 	sl.sl_imap = lmp;
2487 	if (((FLAGS2(lmp) & FL2_RT_DTFLAGS) == 0) &&
2488 	    copy_zerobits(*dlmp, osym)) {
2489 		Rt_map	*ilmp;
2490 		Sym	*isym;
2491 
2492 		/*
2493 		 * Determine whether the same symbol name exists within the
2494 		 * executable, that the size and type of symbol are the same,
2495 		 * and that the symbol is also associated with .bss.
2496 		 */
2497 		if (((isym = SYMINTP(lmp)(&sl, &ilmp, binfo)) != NULL) &&
2498 		    (isym->st_size == osym->st_size) &&
2499 		    (isym->st_info == osym->st_info) &&
2500 		    copy_zerobits(lmp, isym)) {
2501 			*dlmp = lmp;
2502 			*binfo |= (DBG_BINFO_INTERPOSE | DBG_BINFO_COPYREF);
2503 			return (isym);
2504 		}
2505 	}
2506 
2507 	if ((lml->lm_flags & LML_FLG_INTRPOSE) == 0)
2508 		return ((Sym *)0);
2509 
2510 	/*
2511 	 * Traverse the list of known interposers to determine whether any
2512 	 * offer the same symbol.  Note, the head of the link-map could be
2513 	 * identified as an interposer.  Otherwise, skip the head of the
2514 	 * link-map, so that we don't bind to any .plt references, or
2515 	 * copy-relocation destinations unintentionally.
2516 	 */
2517 	lmp = lml->lm_head;
2518 	sl = *slp;
2519 	if (((FLAGS(lmp) & MSK_RT_INTPOSE) == 0) || (sl.sl_flags & LKUP_COPY))
2520 		lmp = (Rt_map *)NEXT(lmp);
2521 
2522 	for (; lmp; lmp = (Rt_map *)NEXT(lmp)) {
2523 		if (FLAGS(lmp) & FLG_RT_DELETE)
2524 			continue;
2525 		if ((FLAGS(lmp) & MSK_RT_INTPOSE) == 0)
2526 			break;
2527 
2528 		if (callable(lmp, *dlmp, 0, sl.sl_flags)) {
2529 			Rt_map	*ilmp;
2530 			Sym	*isym;
2531 
2532 			sl.sl_imap = lmp;
2533 			if (isym = SYMINTP(lmp)(&sl, &ilmp, binfo)) {
2534 				/*
2535 				 * If this object provides individual symbol
2536 				 * interposers, make sure that the symbol we
2537 				 * have found is tagged as an interposer.
2538 				 */
2539 				if ((FLAGS(ilmp) & FLG_RT_SYMINTPO) &&
2540 				    (is_sym_interposer(ilmp, isym) == 0))
2541 					continue;
2542 
2543 				/*
2544 				 * Indicate this binding has occurred to an
2545 				 * interposer, and return the symbol.
2546 				 */
2547 				*binfo |= DBG_BINFO_INTERPOSE;
2548 				*dlmp = ilmp;
2549 				return (isym);
2550 			}
2551 		}
2552 	}
2553 	return ((Sym *)0);
2554 }
2555 
2556 /*
2557  * If an object specifies direct bindings (it contains a syminfo structure
2558  * describing where each binding was established during link-editing, and the
2559  * object was built -Bdirect), then look for the symbol in the specific object.
2560  */
2561 static Sym *
2562 lookup_sym_direct(Slookup *slp, Rt_map **dlmp, uint_t *binfo, Syminfo *sip,
2563     Rt_map *lmp)
2564 {
2565 	Rt_map	*clmp = slp->sl_cmap;
2566 	Sym	*sym;
2567 	Slookup	sl;
2568 
2569 	/*
2570 	 * If a direct binding resolves to the definition of a copy relocated
2571 	 * variable, it must be redirected to the copy (in the executable) that
2572 	 * will eventually be made.  Typically, this redirection occurs in
2573 	 * lookup_sym_interpose().  But, there's an edge condition.  If a
2574 	 * directly bound executable contains pic code, there may be a
2575 	 * reference to a definition that will eventually have a copy made.
2576 	 * However, this copy relocation may not yet have occurred, because
2577 	 * the relocation making this reference comes before the relocation
2578 	 * that will create the copy.
2579 	 * Under direct bindings, the syminfo indicates that a copy will be
2580 	 * taken (SYMINFO_FLG_COPY).  This can only be set in an executable.
2581 	 * Thus, the caller must be the executable, so bind to the destination
2582 	 * of the copy within the executable.
2583 	 */
2584 	if (((slp->sl_flags & LKUP_COPY) == 0) &&
2585 	    (sip->si_flags & SYMINFO_FLG_COPY)) {
2586 
2587 		slp->sl_imap = LIST(clmp)->lm_head;
2588 		if (sym = SYMINTP(clmp)(slp, dlmp, binfo))
2589 			*binfo |= (DBG_BINFO_DIRECT | DBG_BINFO_COPYREF);
2590 		return (sym);
2591 	}
2592 
2593 	/*
2594 	 * If we need to directly bind to our parent, start looking in each
2595 	 * callers link map.
2596 	 */
2597 	sl = *slp;
2598 	sl.sl_flags |= LKUP_DIRECT;
2599 	sym = 0;
2600 
2601 	if (sip->si_boundto == SYMINFO_BT_PARENT) {
2602 		Aliste		idx1;
2603 		Bnd_desc	*bdp;
2604 		Grp_hdl		*ghp;
2605 
2606 		/*
2607 		 * Determine the parent of this explicit dependency from its
2608 		 * CALLERS()'s list.
2609 		 */
2610 		for (APLIST_TRAVERSE(CALLERS(clmp), idx1, bdp)) {
2611 			sl.sl_imap = lmp = bdp->b_caller;
2612 			if ((sym = SYMINTP(lmp)(&sl, dlmp, binfo)) != NULL)
2613 				goto found;
2614 		}
2615 
2616 		/*
2617 		 * A caller can also be defined as the parent of a dlopen()
2618 		 * call.  Determine whether this object has any handles.  The
2619 		 * dependencies maintained with the handle represent the
2620 		 * explicit dependencies of the dlopen()'ed object, and the
2621 		 * calling parent.
2622 		 */
2623 		for (APLIST_TRAVERSE(HANDLES(clmp), idx1, ghp)) {
2624 			Grp_desc	*gdp;
2625 			Aliste		idx2;
2626 
2627 			for (ALIST_TRAVERSE(ghp->gh_depends, idx2, gdp)) {
2628 				if ((gdp->gd_flags & GPD_PARENT) == 0)
2629 					continue;
2630 				sl.sl_imap = lmp = gdp->gd_depend;
2631 				if ((sym = SYMINTP(lmp)(&sl, dlmp,
2632 				    binfo)) != NULL)
2633 					goto found;
2634 			}
2635 		}
2636 	} else {
2637 		/*
2638 		 * If we need to direct bind to anything else look in the
2639 		 * link map associated with this symbol reference.
2640 		 */
2641 		if (sip->si_boundto == SYMINFO_BT_SELF)
2642 			sl.sl_imap = lmp = clmp;
2643 		else
2644 			sl.sl_imap = lmp;
2645 
2646 		if (lmp)
2647 			sym = SYMINTP(lmp)(&sl, dlmp, binfo);
2648 	}
2649 found:
2650 	if (sym)
2651 		*binfo |= DBG_BINFO_DIRECT;
2652 
2653 	/*
2654 	 * If we've bound to an object, determine whether that object can be
2655 	 * interposed upon for this symbol.
2656 	 */
2657 	if (sym && (LIST(*dlmp)->lm_head != *dlmp) &&
2658 	    (LIST(*dlmp) == LIST(clmp))) {
2659 		Sym	*isym;
2660 
2661 		if ((isym = lookup_sym_interpose(slp, dlmp, binfo,
2662 		    LIST(*dlmp), sym)) != 0)
2663 			return (isym);
2664 	}
2665 
2666 	return (sym);
2667 }
2668 
2669 static Sym *
2670 core_lookup_sym(Rt_map *ilmp, Slookup *slp, Rt_map **dlmp, uint_t *binfo,
2671     Aliste off)
2672 {
2673 	Rt_map	*lmp;
2674 
2675 	/*
2676 	 * Copy relocations should start their search after the head of the
2677 	 * main link-map control list.
2678 	 */
2679 	if ((off == ALIST_OFF_DATA) && (slp->sl_flags & LKUP_COPY) && ilmp)
2680 		lmp = (Rt_map *)NEXT(ilmp);
2681 	else
2682 		lmp = ilmp;
2683 
2684 	for (; lmp; lmp = (Rt_map *)NEXT(lmp)) {
2685 		if (callable(slp->sl_cmap, lmp, 0, slp->sl_flags)) {
2686 			Sym	*sym;
2687 
2688 			slp->sl_imap = lmp;
2689 			if (((sym = SYMINTP(lmp)(slp, dlmp, binfo)) != NULL) ||
2690 			    (*binfo & BINFO_REJSINGLE))
2691 				return (sym);
2692 		}
2693 	}
2694 	return (0);
2695 }
2696 
2697 static Sym *
2698 _lazy_find_sym(Rt_map *ilmp, Slookup *slp, Rt_map **dlmp, uint_t *binfo)
2699 {
2700 	Rt_map	*lmp;
2701 
2702 	for (lmp = ilmp; lmp; lmp = (Rt_map *)NEXT(lmp)) {
2703 		if (LAZY(lmp) == 0)
2704 			continue;
2705 		if (callable(slp->sl_cmap, lmp, 0, slp->sl_flags)) {
2706 			Sym	*sym;
2707 
2708 			slp->sl_imap = lmp;
2709 			if ((sym = elf_lazy_find_sym(slp, dlmp, binfo)) != 0)
2710 				return (sym);
2711 		}
2712 	}
2713 	return (0);
2714 }
2715 
2716 static Sym *
2717 _lookup_sym(Slookup *slp, Rt_map **dlmp, uint_t *binfo)
2718 {
2719 	const char	*name = slp->sl_name;
2720 	Rt_map		*clmp = slp->sl_cmap;
2721 	Rt_map		*ilmp = slp->sl_imap, *lmp;
2722 	ulong_t		rsymndx;
2723 	Sym		*sym;
2724 	Syminfo		*sip;
2725 	Slookup		sl;
2726 
2727 	/*
2728 	 * Search the initial link map for the required symbol (this category is
2729 	 * selected by dlsym(), where individual link maps are searched for a
2730 	 * required symbol.  Therefore, we know we have permission to look at
2731 	 * the link map).
2732 	 */
2733 	if (slp->sl_flags & LKUP_FIRST)
2734 		return (SYMINTP(ilmp)(slp, dlmp, binfo));
2735 
2736 	/*
2737 	 * Determine whether this lookup can be satisfied by an objects direct,
2738 	 * or lazy binding information.  This is triggered by a relocation from
2739 	 * the object (hence rsymndx is set).
2740 	 */
2741 	if (((rsymndx = slp->sl_rsymndx) != 0) &&
2742 	    ((sip = SYMINFO(clmp)) != NULL)) {
2743 		/*
2744 		 * Find the corresponding Syminfo entry for the original
2745 		 * referencing symbol.
2746 		 */
2747 		/* LINTED */
2748 		sip = (Syminfo *)((char *)sip + (rsymndx * SYMINENT(clmp)));
2749 
2750 		/*
2751 		 * If the symbol information indicates a direct binding,
2752 		 * determine the link map that is required to satisfy the
2753 		 * binding.  Note, if the dependency can not be found, but a
2754 		 * direct binding isn't required, we will still fall through
2755 		 * to perform any default symbol search.
2756 		 */
2757 		if (sip->si_flags & SYMINFO_FLG_DIRECT) {
2758 			uint_t	bound = sip->si_boundto;
2759 
2760 			lmp = 0;
2761 			if (bound < SYMINFO_BT_LOWRESERVE)
2762 				lmp = elf_lazy_load(clmp, slp, bound, name);
2763 
2764 			/*
2765 			 * If direct bindings have been disabled, and this isn't
2766 			 * a translator, skip any direct binding now that we've
2767 			 * ensured the resolving object has been loaded.
2768 			 *
2769 			 * If we need to direct bind to anything, we look in
2770 			 * ourselves, our parent, or in the link map we've just
2771 			 * loaded.  Otherwise, even though we may have lazily
2772 			 * loaded an object we still continue to search for
2773 			 * symbols from the head of the link map list.
2774 			 */
2775 			if (((FLAGS(clmp) & FLG_RT_TRANS) ||
2776 			    ((!(LIST(clmp)->lm_tflags & LML_TFLG_NODIRECT)) &&
2777 			    (!(slp->sl_flags & LKUP_SINGLETON)))) &&
2778 			    ((FLAGS1(clmp) & FL1_RT_DIRECT) ||
2779 			    (sip->si_flags & SYMINFO_FLG_DIRECTBIND))) {
2780 				sym = lookup_sym_direct(slp, dlmp, binfo,
2781 				    sip, lmp);
2782 
2783 				/*
2784 				 * Determine whether this direct binding has
2785 				 * been rejected.  If we've bound to a singleton
2786 				 * without following a singleton search, then
2787 				 * return.  The caller detects this condition
2788 				 * and will trigger a new singleton search.
2789 				 *
2790 				 * For any other rejection (such as binding to
2791 				 * a symbol labeled as nodirect - presumably
2792 				 * because the symbol definition has been
2793 				 * changed since the referring object was last
2794 				 * built), fall through to a standard symbol
2795 				 * search.
2796 				 */
2797 				if (((*binfo & BINFO_REJECTED) == 0) ||
2798 				    (*binfo & BINFO_REJSINGLE))
2799 					return (sym);
2800 
2801 				*binfo &= ~BINFO_REJECTED;
2802 			}
2803 		}
2804 	}
2805 
2806 	/*
2807 	 * Duplicate the lookup information, as we'll need to modify this
2808 	 * information for some of the following searches.
2809 	 */
2810 	sl = *slp;
2811 
2812 	/*
2813 	 * If the referencing object has the DF_SYMBOLIC flag set, look in the
2814 	 * referencing object for the symbol first.  Failing that, fall back to
2815 	 * our generic search.
2816 	 */
2817 	if ((FLAGS1(clmp) & FL1_RT_SYMBOLIC) &&
2818 	    ((sl.sl_flags & LKUP_SINGLETON) == 0)) {
2819 		sl.sl_imap = clmp;
2820 		if (sym = SYMINTP(clmp)(&sl, dlmp, binfo)) {
2821 			ulong_t	dsymndx = (((ulong_t)sym -
2822 			    (ulong_t)SYMTAB(*dlmp)) / SYMENT(*dlmp));
2823 
2824 			/*
2825 			 * Make sure this symbol hasn't explicitly been defined
2826 			 * as nodirect.
2827 			 */
2828 			if (((sip = SYMINFO(*dlmp)) == 0) ||
2829 			    /* LINTED */
2830 			    ((sip = (Syminfo *)((char *)sip +
2831 			    (dsymndx * SYMINENT(*dlmp)))) == 0) ||
2832 			    ((sip->si_flags & SYMINFO_FLG_NOEXTDIRECT) == 0))
2833 				return (sym);
2834 		}
2835 	}
2836 
2837 	sl.sl_flags |= LKUP_STANDARD;
2838 
2839 	/*
2840 	 * If this lookup originates from a standard relocation, then traverse
2841 	 * all link-map control lists, inspecting any object that is available
2842 	 * to this caller.  Otherwise, traverse the link-map control list
2843 	 * associated with the caller.
2844 	 */
2845 	if (sl.sl_flags & LKUP_STDRELOC) {
2846 		Aliste	off;
2847 		Lm_cntl	*lmc;
2848 
2849 		sym = NULL;
2850 
2851 		for (ALIST_TRAVERSE_BY_OFFSET(LIST(clmp)->lm_lists, off, lmc)) {
2852 			if (((sym = core_lookup_sym(lmc->lc_head, &sl, dlmp,
2853 			    binfo, off)) != NULL) ||
2854 			    (*binfo & BINFO_REJSINGLE))
2855 				break;
2856 		}
2857 	} else
2858 		sym = core_lookup_sym(ilmp, &sl, dlmp, binfo, ALIST_OFF_DATA);
2859 
2860 	/*
2861 	 * If a symbol binding was rejected, because a binding occurred to a
2862 	 * singleton without following the default symbol search, return so
2863 	 * that the search can be repreated.
2864 	 */
2865 	if (*binfo & BINFO_REJSINGLE)
2866 		return (sym);
2867 
2868 	/*
2869 	 * To allow transitioning into a world of lazy loading dependencies see
2870 	 * if this link map contains objects that have lazy dependencies still
2871 	 * outstanding.  If so, and we haven't been able to locate a non-weak
2872 	 * symbol reference, start bringing in any lazy dependencies to see if
2873 	 * the reference can be satisfied.  Use of dlsym(RTLD_PROBE) sets the
2874 	 * LKUP_NOFALLBACK flag, and this flag disables this fall back.
2875 	 */
2876 	if ((sym == NULL) && ((sl.sl_flags & LKUP_NOFALLBACK) == 0)) {
2877 		if ((lmp = ilmp) == 0)
2878 			lmp = LIST(clmp)->lm_head;
2879 
2880 		if ((sl.sl_flags & LKUP_WEAK) || (LIST(lmp)->lm_lazy == 0))
2881 			return ((Sym *)0);
2882 
2883 		DBG_CALL(Dbg_syms_lazy_rescan(LIST(clmp), name));
2884 
2885 		/*
2886 		 * If this request originated from a dlsym(RTLD_NEXT) then start
2887 		 * looking for dependencies from the caller, otherwise use the
2888 		 * initial link-map.
2889 		 */
2890 		if (sl.sl_flags & LKUP_NEXT)
2891 			sym = _lazy_find_sym(clmp, &sl, dlmp, binfo);
2892 		else {
2893 			Aliste	idx;
2894 			Lm_cntl	*lmc;
2895 
2896 			for (ALIST_TRAVERSE(LIST(clmp)->lm_lists, idx, lmc)) {
2897 				sl.sl_flags |= LKUP_NOFALLBACK;
2898 				if ((sym = _lazy_find_sym(lmc->lc_head, &sl,
2899 				    dlmp, binfo)) != 0)
2900 					break;
2901 			}
2902 		}
2903 	}
2904 	return (sym);
2905 }
2906 
2907 /*
2908  * Symbol lookup routine.  Takes an ELF symbol name, and a list of link maps to
2909  * search.  If successful, return a pointer to the symbol table entry, a
2910  * pointer to the link map of the enclosing object, and information relating
2911  * to the type of binding.  Else return a null pointer.
2912  *
2913  * To improve elf performance, we first compute the elf hash value and pass
2914  * it to each find_sym() routine.  The elf function will use this value to
2915  * locate the symbol, the a.out function will simply ignore it.
2916  */
2917 Sym *
2918 lookup_sym(Slookup *slp, Rt_map **dlmp, uint_t *binfo)
2919 {
2920 	Rt_map		*clmp = slp->sl_cmap;
2921 	Sym		*rsym = slp->sl_rsym, *sym = 0;
2922 	uchar_t		rtype = slp->sl_rtype;
2923 
2924 	if (slp->sl_hash == 0)
2925 		slp->sl_hash = elf_hash(slp->sl_name);
2926 	*binfo = 0;
2927 
2928 	/*
2929 	 * Establish any state that might be associated with a symbol reference.
2930 	 */
2931 	if (rsym) {
2932 		if ((slp->sl_flags & LKUP_STDRELOC) &&
2933 		    (ELF_ST_BIND(rsym->st_info) == STB_WEAK))
2934 			slp->sl_flags |= LKUP_WEAK;
2935 
2936 		if (ELF_ST_VISIBILITY(rsym->st_other) == STV_SINGLETON)
2937 			slp->sl_flags |= LKUP_SINGLETON;
2938 	}
2939 
2940 	/*
2941 	 * Establish any lookup state required for this type of relocation.
2942 	 */
2943 	if ((slp->sl_flags & LKUP_STDRELOC) && rtype) {
2944 		if (rtype == M_R_COPY)
2945 			slp->sl_flags |= LKUP_COPY;
2946 
2947 		if (rtype != M_R_JMP_SLOT)
2948 			slp->sl_flags |= LKUP_SPEC;
2949 	}
2950 
2951 	/*
2952 	 * Under ldd -w, any unresolved weak references are diagnosed.  Set the
2953 	 * symbol binding as global to trigger a relocation error if the symbol
2954 	 * can not be found.
2955 	 */
2956 	if (rsym) {
2957 		if (LIST(slp->sl_cmap)->lm_flags & LML_FLG_TRC_NOUNRESWEAK)
2958 			slp->sl_bind = STB_GLOBAL;
2959 		else if ((slp->sl_bind = ELF_ST_BIND(rsym->st_info)) ==
2960 		    STB_WEAK)
2961 			slp->sl_flags |= LKUP_WEAK;
2962 	}
2963 
2964 	/*
2965 	 * Carry out an initial symbol search.  This search takes into account
2966 	 * all the modes of the requested search.
2967 	 */
2968 	if (((sym = _lookup_sym(slp, dlmp, binfo)) == NULL) &&
2969 	    (*binfo & BINFO_REJSINGLE)) {
2970 		Slookup	sl = *slp;
2971 
2972 		/*
2973 		 * If a binding has been rejected because of binding to a
2974 		 * singleton without going through a singleton search, then
2975 		 * reset the lookup data, and try again.
2976 		 */
2977 		sl.sl_imap = LIST(sl.sl_cmap)->lm_head;
2978 		sl.sl_flags &= ~(LKUP_FIRST | LKUP_SELF | LKUP_NEXT);
2979 		sl.sl_flags |= LKUP_SINGLETON;
2980 		sl.sl_rsymndx = 0;
2981 		*binfo &= ~BINFO_REJECTED;
2982 		sym = _lookup_sym(&sl, dlmp, binfo);
2983 	}
2984 
2985 	/*
2986 	 * If the caller is restricted to a symbol search within its group,
2987 	 * determine if it is necessary to follow a binding from outside of
2988 	 * the group.
2989 	 */
2990 	if (sym && ((MODE(clmp) & (RTLD_GROUP | RTLD_WORLD)) == RTLD_GROUP)) {
2991 		Sym	*isym;
2992 
2993 		if ((isym = lookup_sym_interpose(slp, dlmp, binfo, LIST(*dlmp),
2994 		    sym)) != 0)
2995 			return (isym);
2996 	}
2997 	return (sym);
2998 }
2999 
3000 /*
3001  * Associate a binding descriptor with a caller and its dependency, or update
3002  * an existing descriptor.
3003  */
3004 int
3005 bind_one(Rt_map *clmp, Rt_map *dlmp, uint_t flags)
3006 {
3007 	Bnd_desc	*bdp;
3008 	Aliste		idx;
3009 	int		found = ALE_CREATE;
3010 
3011 	/*
3012 	 * Determine whether a binding descriptor already exists between the
3013 	 * two objects.
3014 	 */
3015 	for (APLIST_TRAVERSE(DEPENDS(clmp), idx, bdp)) {
3016 		if (bdp->b_depend == dlmp) {
3017 			found = ALE_EXISTS;
3018 			break;
3019 		}
3020 	}
3021 
3022 	if (found == ALE_CREATE) {
3023 		/*
3024 		 * Create a new binding descriptor.
3025 		 */
3026 		if ((bdp = malloc(sizeof (Bnd_desc))) == 0)
3027 			return (0);
3028 
3029 		bdp->b_caller = clmp;
3030 		bdp->b_depend = dlmp;
3031 		bdp->b_flags = 0;
3032 
3033 		/*
3034 		 * Append the binding descriptor to the caller and the
3035 		 * dependency.
3036 		 */
3037 		if (aplist_append(&DEPENDS(clmp), bdp, AL_CNT_DEPENDS) == 0)
3038 			return (0);
3039 
3040 		if (aplist_append(&CALLERS(dlmp), bdp, AL_CNT_CALLERS) == 0)
3041 			return (0);
3042 	}
3043 
3044 	if ((found == ALE_CREATE) || ((bdp->b_flags & flags) != flags)) {
3045 		bdp->b_flags |= flags;
3046 
3047 		if (flags & BND_REFER)
3048 			FLAGS1(dlmp) |= FL1_RT_USED;
3049 
3050 		DBG_CALL(Dbg_file_bind_entry(LIST(clmp), bdp));
3051 	}
3052 	return (found);
3053 }
3054 
3055 /*
3056  * Cleanup after relocation processing.
3057  */
3058 int
3059 relocate_finish(Rt_map *lmp, APlist *bound, int textrel, int ret)
3060 {
3061 	DBG_CALL(Dbg_reloc_run(lmp, 0, ret, DBG_REL_FINISH));
3062 
3063 	/*
3064 	 * Establish bindings to all objects that have been bound to.
3065 	 */
3066 	if (bound) {
3067 		Aliste	idx;
3068 		Rt_map	*_lmp;
3069 
3070 		if (ret) {
3071 			for (APLIST_TRAVERSE(bound, idx, _lmp)) {
3072 				if (bind_one(lmp, _lmp, BND_REFER) == 0) {
3073 					ret = 0;
3074 					break;
3075 				}
3076 			}
3077 		}
3078 		free(bound);
3079 	}
3080 
3081 	/*
3082 	 * If we write enabled the text segment to perform these relocations
3083 	 * re-protect by disabling writes.
3084 	 */
3085 	if (textrel)
3086 		(void) LM_SET_PROT(lmp)(lmp, 0);
3087 
3088 	return (ret);
3089 }
3090