xref: /titanic_41/usr/src/cmd/sendmail/src/conf.h (revision 160abee025ef30c34521b981edd40ffcaab560aa)
1 /*
2  * Copyright (c) 1998-2002 Sendmail, Inc. and its suppliers.
3  *	All rights reserved.
4  * Copyright (c) 1983, 1995-1997 Eric P. Allman.  All rights reserved.
5  * Copyright (c) 1988, 1993
6  *	The Regents of the University of California.  All rights reserved.
7  *
8  * By using this file, you agree to the terms and conditions set
9  * forth in the LICENSE file which can be found at the top level of
10  * the sendmail distribution.
11  *
12  *
13  *	$Id: conf.h,v 8.574 2006/11/29 00:36:06 ca Exp $
14  */
15 
16 #pragma ident	"%Z%%M%	%I%	%E% SMI"
17 
18 /*
19 **  CONF.H -- All user-configurable parameters for sendmail
20 **
21 **	Send updates to sendmail@Sendmail.ORG so they will be
22 **	included in the next release.
23 */
24 
25 #ifndef CONF_H
26 #define CONF_H 1
27 
28 #ifdef __GNUC__
29 struct rusage;	/* forward declaration to get gcc to shut up in wait.h */
30 #endif /* __GNUC__ */
31 
32 # include <sys/param.h>
33 # include <sys/types.h>
34 # include <sys/stat.h>
35 # ifndef __QNX__
36 /* in QNX this grabs bogus LOCK_* manifests */
37 #  include <sys/file.h>
38 # endif /* ! __QNX__ */
39 # include <sys/wait.h>
40 # include <limits.h>
41 # include <fcntl.h>
42 # include <signal.h>
43 # include <netdb.h>
44 # include <pwd.h>
45 # include <grp.h>
46 
47 /* make sure TOBUFSIZ isn't larger than system limit for size of exec() args */
48 #ifdef ARG_MAX
49 # if ARG_MAX > 4096
50 #  define SM_ARG_MAX	4096
51 # else /* ARG_MAX > 4096 */
52 #  define SM_ARG_MAX	ARG_MAX
53 # endif /* ARG_MAX > 4096 */
54 #else /* ARG_MAX */
55 # define SM_ARG_MAX	4096
56 #endif /* ARG_MAX */
57 
58 /**********************************************************************
59 **  Table sizes, etc....
60 **	There shouldn't be much need to change these....
61 **	If you do, be careful, none should be set anywhere near INT_MAX
62 **********************************************************************/
63 
64 #define MAXLINE		2048	/* max line length */
65 #if SASL
66 # define MAXINPLINE	12288	/* max input line length (for AUTH) */
67 #else /* SASL */
68 # define MAXINPLINE	MAXLINE	/* max input line length */
69 #endif /* SASL */
70 #define MAXNAME		256	/* max length of a name */
71 #ifndef MAXAUTHINFO
72 # define MAXAUTHINFO	100	/* max length of authinfo token */
73 #endif /* ! MAXAUTHINFO */
74 #define MAXPV		256	/* max # of parms to mailers */
75 #define MAXATOM		1000	/* max atoms per address */
76 #define MAXRWSETS	200	/* max # of sets of rewriting rules */
77 #define MAXPRIORITIES	25	/* max values for Precedence: field */
78 #define MAXMXHOSTS	100	/* max # of MX records for one host */
79 #define SMTPLINELIM	990	/* max SMTP line length */
80 #define MAXUDBKEY	128	/* max size of a database key (udb only) */
81 #define MAXKEY		1024	/* max size of a database key */
82 #define MEMCHUNKSIZE	1024	/* chunk size for memory allocation */
83 #define MAXUSERENVIRON	100	/* max envars saved, must be >= 3 */
84 #define MAXMAPSTACK	12	/* max # of stacked or sequenced maps */
85 #if MILTER
86 # define MAXFILTERS	25	/* max # of milter filters */
87 # define MAXFILTERMACROS 50	/* max # of macros per milter cmd */
88 #endif /* MILTER */
89 #define MAXSMTPARGS	20	/* max # of ESMTP args for MAIL/RCPT */
90 #define MAXTOCLASS	8	/* max # of message timeout classes */
91 #define MAXRESTOTYPES	3	/* max # of resolver timeout types */
92 #define MAXMIMEARGS	20	/* max args in Content-Type: */
93 #define MAXMIMENESTING	20	/* max MIME multipart nesting */
94 #define QUEUESEGSIZE	1000	/* increment for queue size */
95 
96 #ifndef MAXNOOPCOMMANDS
97 # define MAXNOOPCOMMANDS 20	/* max "noise" commands before slowdown */
98 #endif /* ! MAXNOOPCOMMANDS */
99 
100 /*
101 **  MAXQFNAME == 2 (size of "qf", "df" prefix)
102 **	+ 8 (base 60 encoded date, time & sequence number)
103 **	+ 10 (base 10 encoded 32 bit process id)
104 **	+ 1 (terminating NUL character).
105 */
106 
107 #define MAXQFNAME	21		/* max qf file name length + 1 */
108 #define MACBUFSIZE	4096		/* max expanded macro buffer size */
109 #define TOBUFSIZE	SM_ARG_MAX	/* max buffer to hold address list */
110 #define MAXSHORTSTR	203		/* max short string length */
111 #define MAXMACNAMELEN	25		/* max macro name length */
112 #define MAXMACROID	0377		/* max macro id number */
113 					/* Must match (BITMAPBITS - 1) */
114 #ifndef MAXHDRSLEN
115 # define MAXHDRSLEN	(32 * 1024)	/* max size of message headers */
116 #endif /* ! MAXHDRSLEN */
117 #define MAXDAEMONS	10		/* max number of ports to listen to */
118 #ifndef MAXINTERFACES
119 # define MAXINTERFACES	512		/* number of interfaces to probe */
120 #endif /* MAXINTERFACES */
121 #ifndef MAXSYMLINKS
122 # define MAXSYMLINKS	32		/* max number of symlinks in a path */
123 #endif /* ! MAXSYMLINKS */
124 #define MAXLINKPATHLEN	(MAXPATHLEN * MAXSYMLINKS) /* max link-expanded file */
125 #define DATA_PROGRESS_TIMEOUT	300	/* how often to check DATA progress */
126 #define ENHSCLEN	10		/* max len of enhanced status code */
127 #define DEFAULT_MAX_RCPT	100	/* max number of RCPTs per envelope */
128 #define MAXQUEUEGROUPS	50		/* max # of queue groups */
129 	/* must be less than BITMAPBITS for DoQueueRun */
130 #define MAXWORKGROUPS	50		/* max # of work groups */
131 #define MAXFILESYS	BITMAPBITS	/* max # of queue file systems
132 					 * must be <= BITMAPBITS */
133 #ifndef FILESYS_UPDATE_INTERVAL
134 # define FILESYS_UPDATE_INTERVAL 300	/* how often to update FileSys table */
135 #endif /* FILESYS_UPDATE_INTERVAL */
136 
137 #ifndef SM_DEFAULT_TTL
138 # define SM_DEFAULT_TTL 3600 /* default TTL for services that don't have one */
139 #endif /* SM_DEFAULT_TTL */
140 
141 #if SASL
142 # ifndef AUTH_MECHANISMS
143 #  if STARTTLS
144 #   define AUTH_MECHANISMS	"EXTERNAL GSSAPI KERBEROS_V4 DIGEST-MD5 CRAM-MD5"
145 #  else /* STARTTLS */
146 #   define AUTH_MECHANISMS	"GSSAPI KERBEROS_V4 DIGEST-MD5 CRAM-MD5"
147 #  endif /* STARTTLS */
148 # endif /* ! AUTH_MECHANISMS */
149 #endif /* SASL */
150 
151 /*
152 **  Default database permissions (alias, maps, etc.)
153 **	Used by sendmail and libsmdb
154 */
155 
156 #ifndef DBMMODE
157 # define DBMMODE	0640
158 #endif /* ! DBMMODE */
159 
160 /*
161 **  Value which means a uid or gid value should not change
162 */
163 
164 #ifndef NO_UID
165 # define NO_UID		-1
166 #endif /* ! NO_UID */
167 #ifndef NO_GID
168 # define NO_GID		-1
169 #endif /* ! NO_GID */
170 
171 /**********************************************************************
172 **  Compilation options.
173 **	#define these to 1 if they are available;
174 **	#define them to 0 otherwise.
175 **  All can be overridden from Makefile.
176 **********************************************************************/
177 
178 #ifndef NETINET
179 # define NETINET	1	/* include internet support */
180 #endif /* ! NETINET */
181 
182 #ifndef NETINET6
183 # define NETINET6	0	/* do not include IPv6 support */
184 #endif /* ! NETINET6 */
185 
186 #ifndef NETISO
187 # define NETISO	0		/* do not include ISO socket support */
188 #endif /* ! NETISO */
189 
190 #ifndef NAMED_BIND
191 # define NAMED_BIND	1	/* use Berkeley Internet Domain Server */
192 #endif /* ! NAMED_BIND */
193 
194 #ifndef XDEBUG
195 # define XDEBUG		1	/* enable extended debugging */
196 #endif /* ! XDEBUG */
197 
198 #ifndef MATCHGECOS
199 # define MATCHGECOS	1	/* match user names from gecos field */
200 #endif /* ! MATCHGECOS */
201 
202 #ifndef DSN
203 # define DSN		1	/* include delivery status notification code */
204 #endif /* ! DSN */
205 
206 #if !defined(USERDB) && (defined(NEWDB) || defined(HESIOD))
207 # define USERDB		1	/* look in user database */
208 #endif /* !defined(USERDB) && (defined(NEWDB) || defined(HESIOD)) */
209 
210 #ifndef MIME8TO7
211 # define MIME8TO7	1	/* 8->7 bit MIME conversions */
212 #endif /* ! MIME8TO7 */
213 
214 #ifndef MIME7TO8
215 # define MIME7TO8	1	/* 7->8 bit MIME conversions */
216 #endif /* ! MIME7TO8 */
217 
218 #if NAMED_BIND
219 # ifndef DNSMAP
220 #  define DNSMAP	1	/* DNS map type */
221 # endif /* ! DNSMAP */
222 #endif /* NAMED_BIND */
223 
224 #ifndef PIPELINING
225 # define PIPELINING	1	/* SMTP PIPELINING */
226 #endif /* PIPELINING */
227 
228 /**********************************************************************
229 **  End of site-specific configuration.
230 **********************************************************************/
231 
232 #include <sm/conf.h>
233 
234 #endif /* ! CONF_H */
235