1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 #pragma ident "%Z%%M% %I% %E% SMI" 23 /* from UCB 5.2 9/11/85 */ 24 25 /* 26 * newfs: friendly front end to mkfs 27 * 28 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 29 * Use is subject to license terms. 30 */ 31 32 #include <sys/param.h> 33 #include <sys/types.h> 34 #include <locale.h> 35 #include <sys/stat.h> 36 #include <sys/buf.h> 37 #include <sys/fs/ufs_fs.h> 38 #include <sys/vnode.h> 39 #include <sys/fs/ufs_inode.h> 40 #include <sys/sysmacros.h> 41 42 #include <errno.h> 43 #include <stdio.h> 44 #include <string.h> 45 #include <stdlib.h> 46 #include <stdarg.h> 47 #include <stdio.h> 48 #include <fcntl.h> 49 #include <unistd.h> 50 #include <limits.h> 51 #include <libintl.h> 52 #include <sys/dkio.h> 53 #include <sys/vtoc.h> 54 #include <sys/mkdev.h> 55 #include <sys/efi_partition.h> 56 57 #include <fslib.h> 58 59 static unsigned int number(char *, char *, int, int); 60 static int64_t number64(char *, char *, int, int64_t); 61 static diskaddr_t getdiskbydev(char *); 62 static int yes(void); 63 static int notrand(char *); 64 static void usage(); 65 static diskaddr_t get_device_size(int, char *); 66 static diskaddr_t brute_force_get_device_size(int); 67 static int validate_size(char *disk, diskaddr_t size); 68 static void exenv(void); 69 static struct fs *read_sb(char *); 70 /*PRINTFLIKE1*/ 71 static void fatal(char *fmt, ...); 72 73 #define EPATH "PATH=/usr/sbin:/sbin:" 74 #define CPATH "/sbin" /* an EPATH element */ 75 #define MB (1024 * 1024) 76 #define GBSEC ((1024 * 1024 * 1024) / DEV_BSIZE) /* sectors in a GB */ 77 #define MINFREESEC ((64 * 1024 * 1024) / DEV_BSIZE) /* sectors in 64 MB */ 78 #define MINCPG (16) /* traditional */ 79 #define MAXDEFDENSITY (8 * 1024) /* arbitrary */ 80 #define MINDENSITY (2 * 1024) /* traditional */ 81 #define MIN_MTB_DENSITY (1024 * 1024) 82 #define POWEROF2(num) (((num) & ((num) - 1)) == 0) 83 #define SECTORS_PER_TERABYTE (1LL << 31) 84 /* 85 * The following constant specifies an upper limit for file system size 86 * that is actually a lot bigger than we expect to support with UFS. (Since 87 * it's specified in sectors, the file system size would be 2**44 * 512, 88 * which is 2**53, which is 8192 Terabytes.) However, it's useful 89 * for checking the basic sanity of a size value that is input on the 90 * command line. 91 */ 92 #define FS_SIZE_UPPER_LIMIT 0x100000000000LL 93 94 /* For use with number() */ 95 #define NR_NONE 0 96 #define NR_PERCENT 0x01 97 98 /* 99 * The following two constants set the default block and fragment sizes. 100 * Both constants must be a power of 2 and meet the following constraints: 101 * MINBSIZE <= DESBLKSIZE <= MAXBSIZE 102 * DEV_BSIZE <= DESFRAGSIZE <= DESBLKSIZE 103 * DESBLKSIZE / DESFRAGSIZE <= 8 104 */ 105 #define DESBLKSIZE 8192 106 #define DESFRAGSIZE 1024 107 108 #ifdef DEBUG 109 #define dprintf(x) printf x 110 #else 111 #define dprintf(x) 112 #endif 113 114 static int Nflag; /* run mkfs without writing file system */ 115 static int Tflag; /* set up file system for growth to over 1 TB */ 116 static int verbose; /* show mkfs line before exec */ 117 static int fsize = 0; /* fragment size */ 118 static int fsize_flag = 0; /* fragment size was specified on cmd line */ 119 static int bsize; /* block size */ 120 static int ntracks; /* # tracks/cylinder */ 121 static int ntracks_set = 0; /* true if the user specified ntracks */ 122 static int optim = FS_OPTTIME; /* optimization, t(ime) or s(pace) */ 123 static int nsectors; /* # sectors/track */ 124 static int cpg; /* cylinders/cylinder group */ 125 static int cpg_set = 0; /* true if the user specified cpg */ 126 static int minfree = -1; /* free space threshold */ 127 static int rpm; /* revolutions/minute of drive */ 128 static int rpm_set = 0; /* true if the user specified rpm */ 129 static int nrpos = 8; /* # of distinguished rotational positions */ 130 /* 8 is the historical default */ 131 static int nrpos_set = 0; /* true if the user specified nrpos */ 132 static int density = 0; /* number of bytes per inode */ 133 static int apc; /* alternates per cylinder */ 134 static int apc_set = 0; /* true if the user specified apc */ 135 static int rot = -1; /* rotational delay (msecs) */ 136 static int rot_set = 0; /* true if the user specified rot */ 137 static int maxcontig = -1; /* maximum number of contig blocks */ 138 static int text_sb = 0; /* no disk changes; just final sb text dump */ 139 static int binary_sb = 0; /* no disk changes; just final sb binary dump */ 140 static int label_type; /* see types below */ 141 142 /* 143 * The variable use_efi_dflts is an indicator of whether to use EFI logic 144 * or the geometry logic in laying out the filesystem. This is decided 145 * based on the size/type of the disk and is used only for non-EFI labeled 146 * disks and removable media. 147 */ 148 static int use_efi_dflts = 0; 149 static int isremovable = 0; 150 151 static char device[MAXPATHLEN]; 152 static char cmd[BUFSIZ]; 153 154 extern char *getfullrawname(); /* from libadm */ 155 156 int 157 main(int argc, char *argv[]) 158 { 159 char *special, *name; 160 struct stat64 st; 161 int status; 162 int option; 163 struct fs *sbp; /* Pointer to superblock (if present) */ 164 diskaddr_t actual_fssize; 165 diskaddr_t max_possible_fssize; 166 diskaddr_t req_fssize = 0; 167 diskaddr_t fssize = 0; 168 char *req_fssize_str = NULL; /* requested size argument */ 169 170 (void) setlocale(LC_ALL, ""); 171 172 #if !defined(TEXT_DOMAIN) 173 #define TEXT_DOMAIN "SYS_TEST" 174 #endif 175 (void) textdomain(TEXT_DOMAIN); 176 177 opterr = 0; /* We print our own errors, disable getopt's message */ 178 while ((option = getopt(argc, argv, 179 "vNBSs:C:d:t:o:a:b:f:c:m:n:r:i:T")) != EOF) { 180 switch (option) { 181 case 'S': 182 text_sb++; 183 break; 184 case 'B': 185 binary_sb++; 186 break; 187 case 'v': 188 verbose++; 189 break; 190 191 case 'N': 192 Nflag++; 193 break; 194 195 case 's': 196 /* 197 * The maximum file system size is a lot smaller 198 * than FS_SIZE_UPPER_LIMIT, but until we find out 199 * the device size and block size, we don't know 200 * what it is. So save the requested size in a 201 * string so that we can print it out later if we 202 * determine it's too big. 203 */ 204 req_fssize = number64("fssize", optarg, NR_NONE, 205 FS_SIZE_UPPER_LIMIT); 206 if (req_fssize < 1024) 207 fatal(gettext( 208 "%s: fssize must be at least 1024"), 209 optarg); 210 req_fssize_str = strdup(optarg); 211 if (req_fssize_str == NULL) 212 fatal(gettext( 213 "Insufficient memory for string copy.")); 214 break; 215 216 case 'C': 217 maxcontig = number("maxcontig", optarg, NR_NONE, -1); 218 if (maxcontig < 0) 219 fatal(gettext("%s: bad maxcontig"), optarg); 220 break; 221 222 case 'd': 223 rot = number("rotdelay", optarg, NR_NONE, 0); 224 rot_set = 1; 225 if (rot < 0 || rot > 1000) 226 fatal(gettext( 227 "%s: bad rotational delay"), optarg); 228 break; 229 230 case 't': 231 ntracks = number("ntrack", optarg, NR_NONE, 16); 232 ntracks_set = 1; 233 if ((ntracks < 0) || 234 (ntracks > INT_MAX)) 235 fatal(gettext("%s: bad total tracks"), optarg); 236 break; 237 238 case 'o': 239 if (strcmp(optarg, "space") == 0) 240 optim = FS_OPTSPACE; 241 else if (strcmp(optarg, "time") == 0) 242 optim = FS_OPTTIME; 243 else 244 fatal(gettext( 245 "%s: bad optimization preference (options are `space' or `time')"), optarg); 246 break; 247 248 case 'a': 249 apc = number("apc", optarg, NR_NONE, 0); 250 apc_set = 1; 251 if (apc < 0 || apc > 32768) /* see mkfs.c */ 252 fatal(gettext( 253 "%s: bad alternates per cyl"), optarg); 254 break; 255 256 case 'b': 257 bsize = number("bsize", optarg, NR_NONE, DESBLKSIZE); 258 if (bsize < MINBSIZE || bsize > MAXBSIZE) 259 fatal(gettext( 260 "%s: bad block size"), optarg); 261 break; 262 263 case 'f': 264 fsize = number("fragsize", optarg, NR_NONE, 265 DESFRAGSIZE); 266 fsize_flag++; 267 /* xxx ought to test against bsize for upper limit */ 268 if (fsize < DEV_BSIZE) 269 fatal(gettext("%s: bad frag size"), optarg); 270 break; 271 272 case 'c': 273 cpg = number("cpg", optarg, NR_NONE, 16); 274 cpg_set = 1; 275 if (cpg < 1) 276 fatal(gettext("%s: bad cylinders/group"), 277 optarg); 278 break; 279 280 case 'm': 281 minfree = number("minfree", optarg, NR_PERCENT, 10); 282 if (minfree < 0 || minfree > 99) 283 fatal(gettext("%s: bad free space %%"), optarg); 284 break; 285 286 case 'n': 287 nrpos = number("nrpos", optarg, NR_NONE, 8); 288 nrpos_set = 1; 289 if (nrpos <= 0) 290 fatal(gettext( 291 "%s: bad number of rotational positions"), 292 optarg); 293 break; 294 295 case 'r': 296 rpm = number("rpm", optarg, NR_NONE, 3600); 297 rpm_set = 1; 298 if (rpm < 0) 299 fatal(gettext("%s: bad revs/minute"), optarg); 300 break; 301 302 case 'i': 303 /* xxx ought to test against fsize */ 304 density = number("nbpi", optarg, NR_NONE, 2048); 305 if (density < DEV_BSIZE) 306 fatal(gettext("%s: bad bytes per inode"), 307 optarg); 308 break; 309 310 case 'T': 311 Tflag++; 312 break; 313 314 default: 315 usage(); 316 fatal(gettext("-%c: unknown flag"), optopt); 317 } 318 } 319 320 /* At this point, there should only be one argument left: */ 321 /* The raw-special-device itself. If not, print usage message. */ 322 if ((argc - optind) != 1) { 323 usage(); 324 exit(1); 325 } 326 327 name = argv[optind]; 328 329 special = getfullrawname(name); 330 if (special == NULL) { 331 (void) fprintf(stderr, gettext("newfs: malloc failed\n")); 332 exit(1); 333 } 334 335 if (*special == '\0') { 336 if (strchr(name, '/') != NULL) { 337 if (stat64(name, &st) < 0) { 338 (void) fprintf(stderr, 339 gettext("newfs: %s: %s\n"), 340 name, strerror(errno)); 341 exit(2); 342 } 343 fatal(gettext("%s: not a raw disk device"), name); 344 } 345 (void) snprintf(device, sizeof (device), "/dev/rdsk/%s", name); 346 if ((special = getfullrawname(device)) == NULL) { 347 (void) fprintf(stderr, 348 gettext("newfs: malloc failed\n")); 349 exit(1); 350 } 351 352 if (*special == '\0') { 353 (void) snprintf(device, sizeof (device), "/dev/%s", 354 name); 355 if ((special = getfullrawname(device)) == NULL) { 356 (void) fprintf(stderr, 357 gettext("newfs: malloc failed\n")); 358 exit(1); 359 } 360 if (*special == '\0') 361 fatal(gettext( 362 "%s: not a raw disk device"), name); 363 } 364 } 365 366 /* 367 * getdiskbydev() determines the characteristics of the special 368 * device on which the file system will be built. In the case 369 * of devices with SMI labels (that is, non-EFI labels), the 370 * following characteristics are set (if they were not already 371 * set on the command line, since the command line settings 372 * take precedence): 373 * 374 * nsectors - sectors per track 375 * ntracks - tracks per cylinder 376 * rpm - disk revolutions per minute 377 * 378 * apc is NOT set 379 * 380 * getdiskbydev() also sets the following quantities for all 381 * devices, if not already set: 382 * 383 * bsize - file system block size 384 * maxcontig 385 * label_type (efi, vtoc, or other) 386 * 387 * getdiskbydev() returns the actual size of the device, in 388 * sectors. 389 */ 390 391 actual_fssize = getdiskbydev(special); 392 393 if (req_fssize == 0) { 394 fssize = actual_fssize; 395 } else { 396 /* 397 * If the user specified a size larger than what we've 398 * determined as the actual size of the device, see if the 399 * size specified by the user can be read. If so, use it, 400 * since some devices and volume managers may not support 401 * the vtoc and EFI interfaces we use to determine device 402 * size. 403 */ 404 if (req_fssize > actual_fssize && 405 validate_size(special, req_fssize)) { 406 (void) fprintf(stderr, gettext( 407 "Warning: the requested size of this file system\n" 408 "(%lld sectors) is greater than the size of the\n" 409 "device reported by the driver (%lld sectors).\n" 410 "However, a read of the device at the requested size\n" 411 "does succeed, so the requested size will be used.\n"), 412 req_fssize, actual_fssize); 413 fssize = req_fssize; 414 } else { 415 fssize = MIN(req_fssize, actual_fssize); 416 } 417 } 418 419 if (label_type == LABEL_TYPE_VTOC) { 420 if (nsectors < 0) 421 fatal(gettext("%s: no default #sectors/track"), 422 special); 423 if (!use_efi_dflts) { 424 if (ntracks < 0) 425 fatal(gettext("%s: no default #tracks"), 426 special); 427 } 428 if (rpm < 0) 429 fatal(gettext( 430 "%s: no default revolutions/minute value"), 431 special); 432 if (rpm < 60) { 433 (void) fprintf(stderr, 434 gettext("Warning: setting rpm to 60\n")); 435 rpm = 60; 436 } 437 } 438 if (label_type == LABEL_TYPE_EFI || label_type == LABEL_TYPE_OTHER) { 439 if (ntracks_set) 440 (void) fprintf(stderr, gettext( 441 "Warning: ntracks is obsolete for this device and will be ignored.\n")); 442 if (cpg_set) 443 (void) fprintf(stderr, gettext( 444 "Warning: cylinders/group is obsolete for this device and will be ignored.\n")); 445 if (rpm_set) 446 (void) fprintf(stderr, gettext( 447 "Warning: rpm is obsolete for this device and will be ignored.\n")); 448 if (rot_set) 449 (void) fprintf(stderr, gettext( 450 "Warning: rotational delay is obsolete for this device and" 451 " will be ignored.\n")); 452 if (nrpos_set) 453 (void) fprintf(stderr, gettext( 454 "Warning: number of rotational positions is obsolete for this device and\n" 455 "will be ignored.\n")); 456 if (apc_set) 457 (void) fprintf(stderr, gettext( 458 "Warning: number of alternate sectors per cylinder is obsolete for this\n" 459 "device and will be ignored.\n")); 460 461 /* 462 * We need these for the call to mkfs, even though they are 463 * meaningless. 464 */ 465 rpm = 60; 466 nrpos = 1; 467 apc = 0; 468 rot = -1; 469 470 /* 471 * These values are set to produce a file system with 472 * a cylinder group size of 48MB. For disks with 473 * non-EFI labels, most geometries result in cylinder 474 * groups of around 40 - 50 MB, so we arbitrarily choose 475 * 48MB for disks with EFI labels. mkfs will reduce 476 * cylinders per group even further if necessary. 477 */ 478 479 cpg = 16; 480 nsectors = 128; 481 ntracks = 48; 482 483 /* 484 * mkfs produces peculiar results for file systems 485 * that are smaller than one cylinder so don't allow 486 * them to be created (this check is only made for 487 * disks with EFI labels. Eventually, it should probably 488 * be enforced for all disks.) 489 */ 490 491 if (fssize < nsectors * ntracks) { 492 fatal(gettext( 493 "file system size must be at least %d sectors"), 494 nsectors * ntracks); 495 } 496 } 497 498 if (fssize > INT_MAX) 499 Tflag = 1; 500 501 /* 502 * If the user requested that the file system be set up for 503 * eventual growth to over a terabyte, or if it's already greater 504 * than a terabyte, set the inode density (nbpi) to MIN_MTB_DENSITY 505 * (unless the user has specified a larger nbpi), set the frag size 506 * equal to the block size, and set the cylinders-per-group value 507 * passed to mkfs to -1, which tells mkfs to make cylinder groups 508 * as large as possible. 509 */ 510 if (Tflag) { 511 if (density < MIN_MTB_DENSITY) 512 density = MIN_MTB_DENSITY; 513 fsize = bsize; 514 cpg = -1; /* says make cyl groups as big as possible */ 515 } else { 516 if (fsize == 0) 517 fsize = DESFRAGSIZE; 518 } 519 520 if (!POWEROF2(fsize)) { 521 (void) fprintf(stderr, gettext( 522 "newfs: fragment size must a power of 2, not %d\n"), fsize); 523 fsize = bsize/8; 524 (void) fprintf(stderr, gettext( 525 "newfs: fragsize reset to %ld\n"), fsize); 526 } 527 528 /* 529 * The file system is limited in size by the fragment size. 530 * The number of fragments in the file system must fit into 531 * a signed 32-bit quantity, so the number of sectors in the 532 * file system is INT_MAX * the number of sectors in a frag. 533 */ 534 535 max_possible_fssize = ((uint64_t)fsize)/DEV_BSIZE * INT_MAX; 536 if (fssize > max_possible_fssize) 537 fssize = max_possible_fssize; 538 539 /* 540 * Now fssize is the final size of the file system (in sectors). 541 * If it's less than what the user requested, print a message. 542 */ 543 if (fssize < req_fssize) { 544 (void) fprintf(stderr, gettext( 545 "newfs: requested size of %s disk blocks is too large.\n"), 546 req_fssize_str); 547 (void) fprintf(stderr, gettext( 548 "newfs: Resetting size to %lld\n"), fssize); 549 } 550 551 /* 552 * fssize now equals the size (in sectors) of the file system 553 * that will be created. 554 */ 555 556 /* XXX - following defaults are both here and in mkfs */ 557 if (density <= 0) { 558 if (fssize < GBSEC) 559 density = MINDENSITY; 560 else 561 density = (int)((((longlong_t)fssize + (GBSEC - 1)) / 562 GBSEC) * MINDENSITY); 563 if (density <= 0) 564 density = MINDENSITY; 565 if (density > MAXDEFDENSITY) 566 density = MAXDEFDENSITY; 567 } 568 if (cpg == 0) { 569 /* 570 * maxcpg calculation adapted from mkfs 571 * In the case of disks with EFI labels, cpg has 572 * already been set, so we won't enter this code. 573 */ 574 long maxcpg, maxipg; 575 576 maxipg = roundup(bsize * NBBY / 3, 577 bsize / sizeof (struct inode)); 578 maxcpg = (bsize - sizeof (struct cg) - howmany(maxipg, NBBY)) / 579 (sizeof (long) + nrpos * sizeof (short) + 580 nsectors / (MAXFRAG * NBBY)); 581 cpg = (fssize / GBSEC) * 32; 582 if (cpg > maxcpg) 583 cpg = maxcpg; 584 if (cpg <= 0) 585 cpg = MINCPG; 586 } 587 if (minfree < 0) { 588 minfree = (int)(((float)MINFREESEC / fssize) * 100); 589 if (minfree > 10) 590 minfree = 10; 591 if (minfree <= 0) 592 minfree = 1; 593 } 594 #ifdef i386 /* Bug 1170182 */ 595 if (ntracks > 32 && (ntracks % 16) != 0) { 596 ntracks -= (ntracks % 16); 597 } 598 #endif 599 /* 600 * Confirmation 601 */ 602 if (isatty(fileno(stdin)) && !Nflag) { 603 /* 604 * If we can read a valid superblock, report the mount 605 * point on which this filesystem was last mounted. 606 */ 607 if (((sbp = read_sb(special)) != 0) && 608 (*sbp->fs_fsmnt != '\0')) { 609 (void) printf(gettext( 610 "newfs: %s last mounted as %s\n"), 611 special, sbp->fs_fsmnt); 612 } 613 (void) printf(gettext( 614 "newfs: construct a new file system %s: (y/n)? "), 615 special); 616 (void) fflush(stdout); 617 if (!yes()) 618 exit(0); 619 } 620 621 dprintf(("DeBuG newfs : nsect=%d ntrak=%d cpg=%d\n", 622 nsectors, ntracks, cpg)); 623 /* 624 * If alternates-per-cylinder is ever implemented: 625 * need to get apc from dp->d_apc if no -a switch??? 626 */ 627 (void) snprintf(cmd, sizeof (cmd), "pfexec mkfs -F ufs " 628 "%s%s%s%s %lld %d %d %d %d %d %d %d %d %s %d %d %d %d %s", 629 Nflag ? "-o N " : "", binary_sb ? "-o calcbinsb " : "", 630 text_sb ? "-o calcsb " : "", special, 631 fssize, nsectors, ntracks, bsize, fsize, cpg, minfree, rpm/60, 632 density, optim == FS_OPTSPACE ? "s" : "t", apc, rot, nrpos, 633 maxcontig, Tflag ? "y" : "n"); 634 if (verbose) { 635 (void) printf("%s\n", cmd); 636 (void) fflush(stdout); 637 } 638 exenv(); 639 if (status = system(cmd)) 640 exit(status >> 8); 641 if (Nflag) 642 exit(0); 643 (void) snprintf(cmd, sizeof (cmd), "/usr/sbin/fsirand %s", special); 644 if (notrand(special) && (status = system(cmd)) != 0) 645 (void) fprintf(stderr, 646 gettext("%s: failed, status = %d\n"), 647 cmd, status); 648 return (0); 649 } 650 651 static void 652 exenv(void) 653 { 654 char *epath; /* executable file path */ 655 char *cpath; /* current path */ 656 657 if ((cpath = getenv("PATH")) == NULL) { 658 (void) fprintf(stderr, gettext("newfs: no PATH in env\n")); 659 /* 660 * Background: the Bourne shell interpolates "." into 661 * the path where said path starts with a colon, ends 662 * with a colon, or has two adjacent colons. Thus, 663 * the path ":/sbin::/usr/sbin:" is equivalent to 664 * ".:/sbin:.:/usr/sbin:.". Now, we have no cpath, 665 * and epath ends in a colon (to make for easy 666 * catenation in the normal case). By the above, if 667 * we use "", then "." becomes part of path. That's 668 * bad, so use CPATH (which is just a duplicate of some 669 * element in EPATH). No point in opening ourselves 670 * up to a Trojan horse attack when we don't have to.... 671 */ 672 cpath = CPATH; 673 } 674 if ((epath = malloc(strlen(EPATH) + strlen(cpath) + 1)) == NULL) { 675 (void) fprintf(stderr, gettext("newfs: malloc failed\n")); 676 exit(1); 677 } 678 (void) strcpy(epath, EPATH); 679 (void) strcat(epath, cpath); 680 if (putenv(epath) < 0) { 681 (void) fprintf(stderr, gettext("newfs: putenv failed\n")); 682 exit(1); 683 } 684 } 685 686 static int 687 yes(void) 688 { 689 int i, b; 690 691 i = b = getchar(); 692 while (b != '\n' && b != '\0' && b != EOF) 693 b = getchar(); 694 return (i == 'y'); 695 } 696 697 /* 698 * xxx Caller must run fmt through gettext(3) for us, if we ever 699 * xxx go the i18n route.... 700 */ 701 static void 702 fatal(char *fmt, ...) 703 { 704 va_list pvar; 705 706 (void) fprintf(stderr, "newfs: "); 707 va_start(pvar, fmt); 708 (void) vfprintf(stderr, fmt, pvar); 709 va_end(pvar); 710 (void) putc('\n', stderr); 711 exit(10); 712 } 713 714 static diskaddr_t 715 getdiskbydev(char *disk) 716 { 717 struct dk_geom g; 718 struct dk_cinfo ci; 719 diskaddr_t actual_size; 720 int fd; 721 722 if ((fd = open64(disk, 0)) < 0) { 723 perror(disk); 724 exit(1); 725 } 726 727 /* 728 * get_device_size() determines the actual size of the 729 * device, and also the disk's attributes, such as geometry. 730 */ 731 actual_size = get_device_size(fd, disk); 732 733 if (label_type == LABEL_TYPE_VTOC) { 734 /* 735 * Geometry information does not make sense for removable media 736 * anyway, so indicate mkfs to use EFI default parameters. 737 */ 738 if (ioctl(fd, DKIOCREMOVABLE, &isremovable)) { 739 dprintf(("DeBuG newfs : Unable to determine if %s is" 740 " Removable Media. Proceeding with system" 741 " determined parameters.\n", disk)); 742 isremovable = 0; 743 } else if (isremovable && !Tflag) 744 use_efi_dflts = 1; 745 746 if (ioctl(fd, DKIOCGGEOM, &g)) 747 fatal(gettext( 748 "%s: Unable to read Disk geometry"), disk); 749 if (((g.dkg_ncyl * g.dkg_nhead * g.dkg_nsect) > CHSLIMIT) && 750 !Tflag) { 751 use_efi_dflts = 1; 752 } 753 dprintf(("DeBuG newfs : geom=%ld, CHSLIMIT=%d " 754 "isremovable = %d use_efi_dflts = %d\n", 755 g.dkg_ncyl * g.dkg_nhead * g.dkg_nsect, CHSLIMIT, 756 isremovable, use_efi_dflts)); 757 /* 758 * The ntracks that is passed to mkfs is decided here based 759 * on 'use_efi_dflts' and whether ntracks was specified as a 760 * command line parameter to newfs. 761 * If ntracks of -1 is passed to mkfs, mkfs uses DEF_TRACKS_EFI 762 * and DEF_SECTORS_EFI for ntracks and nsectors respectively. 763 */ 764 if (nsectors == 0) 765 nsectors = g.dkg_nsect; 766 if (ntracks == 0) 767 ntracks = use_efi_dflts ? -1 : g.dkg_nhead; 768 if (rpm == 0) 769 rpm = ((int)g.dkg_rpm <= 0) ? 3600: g.dkg_rpm; 770 } 771 772 if (bsize == 0) 773 bsize = DESBLKSIZE; 774 /* 775 * Adjust maxcontig by the device's maxtransfer. If maxtransfer 776 * information is not available, default to the min of a MB and 777 * maxphys. 778 */ 779 if (maxcontig == -1 && ioctl(fd, DKIOCINFO, &ci) == 0) { 780 maxcontig = ci.dki_maxtransfer * DEV_BSIZE; 781 if (maxcontig < 0) { 782 int error, gotit, maxphys; 783 gotit = fsgetmaxphys(&maxphys, &error); 784 785 /* 786 * If we cannot get the maxphys value, default 787 * to ufs_maxmaxphys (MB). 788 */ 789 if (gotit) { 790 maxcontig = MIN(maxphys, MB); 791 } else { 792 (void) fprintf(stderr, gettext( 793 "Warning: Could not get system value for maxphys. The value for maxcontig\n" 794 "will default to 1MB.\n")); 795 maxcontig = MB; 796 } 797 } 798 maxcontig /= bsize; 799 } 800 (void) close(fd); 801 return (actual_size); 802 } 803 804 /* 805 * Figure out how big the partition we're dealing with is. 806 */ 807 static diskaddr_t 808 get_device_size(int fd, char *name) 809 { 810 struct vtoc vtoc; 811 dk_gpt_t *efi_vtoc; 812 diskaddr_t slicesize; 813 814 int index = read_vtoc(fd, &vtoc); 815 816 if (index >= 0) { 817 label_type = LABEL_TYPE_VTOC; 818 } else { 819 if (index == VT_ENOTSUP || index == VT_ERROR) { 820 /* it might be an EFI label */ 821 index = efi_alloc_and_read(fd, &efi_vtoc); 822 if (index >= 0) 823 label_type = LABEL_TYPE_EFI; 824 } 825 } 826 827 if (index < 0) { 828 /* 829 * Since both attempts to read the label failed, we're 830 * going to fall back to a brute force approach to 831 * determining the device's size: see how far out we can 832 * perform reads on the device. 833 */ 834 835 slicesize = brute_force_get_device_size(fd); 836 if (slicesize == 0) { 837 switch (index) { 838 case VT_ERROR: 839 (void) fprintf(stderr, gettext( 840 "newfs: %s: %s\n"), name, strerror(errno)); 841 exit(10); 842 /*NOTREACHED*/ 843 case VT_EIO: 844 fatal(gettext( 845 "%s: I/O error accessing VTOC"), name); 846 /*NOTREACHED*/ 847 case VT_EINVAL: 848 fatal(gettext( 849 "%s: Invalid field in VTOC"), name); 850 /*NOTREACHED*/ 851 default: 852 fatal(gettext( 853 "%s: unknown error accessing VTOC"), 854 name); 855 /*NOTREACHED*/ 856 } 857 } else { 858 label_type = LABEL_TYPE_OTHER; 859 } 860 } 861 862 if (label_type == LABEL_TYPE_EFI) { 863 slicesize = efi_vtoc->efi_parts[index].p_size; 864 efi_free(efi_vtoc); 865 } else if (label_type == LABEL_TYPE_VTOC) { 866 /* 867 * In the vtoc struct, p_size is a 32-bit signed quantity. 868 * In the dk_gpt struct (efi's version of the vtoc), p_size 869 * is an unsigned 64-bit quantity. By casting the vtoc's 870 * psize to an unsigned 32-bit quantity, it will be copied 871 * to 'slicesize' (an unsigned 64-bit diskaddr_t) without 872 * sign extension. 873 */ 874 875 slicesize = (uint32_t)vtoc.v_part[index].p_size; 876 } 877 878 return (slicesize); 879 } 880 881 /* 882 * brute_force_get_device_size 883 * 884 * Determine the size of the device by seeing how far we can 885 * read. Doing an llseek( , , SEEK_END) would probably work 886 * in most cases, but we've seen at least one third-party driver 887 * which doesn't correctly support the SEEK_END option when the 888 * the device is greater than a terabyte. 889 */ 890 891 static diskaddr_t 892 brute_force_get_device_size(int fd) 893 { 894 diskaddr_t min_fail = 0; 895 diskaddr_t max_succeed = 0; 896 diskaddr_t cur_db_off; 897 char buf[DEV_BSIZE]; 898 899 /* 900 * First, see if we can read the device at all, just to 901 * eliminate errors that have nothing to do with the 902 * device's size. 903 */ 904 905 if (((llseek(fd, (offset_t)0, SEEK_SET)) == -1) || 906 ((read(fd, buf, DEV_BSIZE)) == -1)) 907 return (0); /* can't determine size */ 908 909 /* 910 * Now, go sequentially through the multiples of 4TB 911 * to find the first read that fails (this isn't strictly 912 * the most efficient way to find the actual size if the 913 * size really could be anything between 0 and 2**64 bytes. 914 * We expect the sizes to be less than 16 TB for some time, 915 * so why do a bunch of reads that are larger than that? 916 * However, this algorithm *will* work for sizes of greater 917 * than 16 TB. We're just not optimizing for those sizes.) 918 */ 919 920 for (cur_db_off = SECTORS_PER_TERABYTE * 4; 921 min_fail == 0 && cur_db_off < FS_SIZE_UPPER_LIMIT; 922 cur_db_off += 4 * SECTORS_PER_TERABYTE) { 923 if (((llseek(fd, (offset_t)(cur_db_off * DEV_BSIZE), 924 SEEK_SET)) == -1) || 925 ((read(fd, buf, DEV_BSIZE)) != DEV_BSIZE)) 926 min_fail = cur_db_off; 927 else 928 max_succeed = cur_db_off; 929 } 930 931 if (min_fail == 0) 932 return (0); 933 934 /* 935 * We now know that the size of the device is less than 936 * min_fail and greater than or equal to max_succeed. Now 937 * keep splitting the difference until the actual size in 938 * sectors in known. We also know that the difference 939 * between max_succeed and min_fail at this time is 940 * 4 * SECTORS_PER_TERABYTE, which is a power of two, which 941 * simplifies the math below. 942 */ 943 944 while (min_fail - max_succeed > 1) { 945 cur_db_off = max_succeed + (min_fail - max_succeed)/2; 946 if (((llseek(fd, (offset_t)(cur_db_off * DEV_BSIZE), 947 SEEK_SET)) == -1) || 948 ((read(fd, buf, DEV_BSIZE)) != DEV_BSIZE)) 949 min_fail = cur_db_off; 950 else 951 max_succeed = cur_db_off; 952 } 953 954 /* the size is the last successfully read sector offset plus one */ 955 return (max_succeed + 1); 956 } 957 958 /* 959 * validate_size 960 * 961 * Return 1 if the device appears to be at least "size" sectors long. 962 * Return 0 if it's shorter or we can't read it. 963 */ 964 965 static int 966 validate_size(char *disk, diskaddr_t size) 967 { 968 char buf[DEV_BSIZE]; 969 int fd, rc; 970 971 if ((fd = open64(disk, O_RDONLY)) < 0) { 972 perror(disk); 973 exit(1); 974 } 975 976 if ((llseek(fd, (offset_t)((size - 1) * DEV_BSIZE), SEEK_SET) == -1) || 977 (read(fd, buf, DEV_BSIZE)) != DEV_BSIZE) 978 rc = 0; 979 else 980 rc = 1; 981 (void) close(fd); 982 return (rc); 983 } 984 985 /* 986 * read_sb(char * rawdev) - Attempt to read the superblock from a raw device 987 * 988 * Returns: 989 * 0 : 990 * Could not read a valid superblock for a variety of reasons. 991 * Since 'newfs' handles any fatal conditions, we're not going 992 * to make any guesses as to why this is failing or what should 993 * be done about it. 994 * 995 * struct fs *: 996 * A pointer to (what we think is) a valid superblock. The 997 * space for the superblock is static (inside the function) 998 * since we will only be reading the values from it. 999 */ 1000 1001 struct fs * 1002 read_sb(char *fsdev) 1003 { 1004 static struct fs sblock; 1005 struct stat64 statb; 1006 int dskfd; 1007 char *bufp = NULL; 1008 int bufsz = 0; 1009 1010 if (stat64(fsdev, &statb) < 0) 1011 return (0); 1012 1013 if ((dskfd = open64(fsdev, O_RDONLY)) < 0) 1014 return (0); 1015 1016 /* 1017 * We need a buffer whose size is a multiple of DEV_BSIZE in order 1018 * to read from a raw device (which we were probably passed). 1019 */ 1020 bufsz = ((sizeof (sblock) / DEV_BSIZE) + 1) * DEV_BSIZE; 1021 if ((bufp = malloc(bufsz)) == NULL) { 1022 (void) close(dskfd); 1023 return (0); 1024 } 1025 1026 if (llseek(dskfd, (offset_t)SBOFF, SEEK_SET) < 0 || 1027 read(dskfd, bufp, bufsz) < 0) { 1028 (void) close(dskfd); 1029 free(bufp); 1030 return (0); 1031 } 1032 (void) close(dskfd); /* Done with the file */ 1033 1034 (void) memcpy(&sblock, bufp, sizeof (sblock)); 1035 free(bufp); /* Don't need this anymore */ 1036 1037 if (((sblock.fs_magic != FS_MAGIC) && 1038 (sblock.fs_magic != MTB_UFS_MAGIC)) || 1039 sblock.fs_ncg < 1 || sblock.fs_cpg < 1) 1040 return (0); 1041 1042 if (sblock.fs_ncg * sblock.fs_cpg < sblock.fs_ncyl || 1043 (sblock.fs_ncg - 1) * sblock.fs_cpg >= sblock.fs_ncyl) 1044 return (0); 1045 1046 if (sblock.fs_sbsize < 0 || sblock.fs_sbsize > SBSIZE) 1047 return (0); 1048 1049 return (&sblock); 1050 } 1051 1052 /* 1053 * Read the UFS file system on the raw device SPECIAL. If it does not 1054 * appear to be a UFS file system, return non-zero, indicating that 1055 * fsirand should be called (and it will spit out an error message). 1056 * If it is a UFS file system, take a look at the inodes in the first 1057 * cylinder group. If they appear to be randomized (non-zero), return 1058 * zero, which will cause fsirand to not be called. If the inode generation 1059 * counts are all zero, then we must call fsirand, so return non-zero. 1060 */ 1061 1062 #define RANDOMIZED 0 1063 #define NOT_RANDOMIZED 1 1064 1065 static int 1066 notrand(char *special) 1067 { 1068 long fsbuf[SBSIZE / sizeof (long)]; 1069 struct dinode dibuf[MAXBSIZE/sizeof (struct dinode)]; 1070 struct fs *fs; 1071 struct dinode *dip; 1072 offset_t seekaddr; 1073 int bno, inum; 1074 int fd; 1075 1076 fs = (struct fs *)fsbuf; 1077 if ((fd = open64(special, 0)) == -1) 1078 return (NOT_RANDOMIZED); 1079 if (llseek(fd, (offset_t)SBLOCK * DEV_BSIZE, 0) == -1 || 1080 read(fd, (char *)fs, SBSIZE) != SBSIZE || 1081 ((fs->fs_magic != FS_MAGIC) && (fs->fs_magic != MTB_UFS_MAGIC))) { 1082 (void) close(fd); 1083 return (NOT_RANDOMIZED); 1084 } 1085 1086 /* looks like a UFS file system; read the first cylinder group */ 1087 bsize = INOPB(fs) * sizeof (struct dinode); 1088 inum = 0; 1089 while (inum < fs->fs_ipg) { 1090 bno = itod(fs, inum); 1091 seekaddr = (offset_t)fsbtodb(fs, bno) * DEV_BSIZE; 1092 if (llseek(fd, seekaddr, 0) == -1 || 1093 read(fd, (char *)dibuf, bsize) != bsize) { 1094 (void) close(fd); 1095 return (NOT_RANDOMIZED); 1096 } 1097 for (dip = dibuf; dip < &dibuf[INOPB(fs)]; dip++) { 1098 if (dip->di_gen != 0) { 1099 (void) close(fd); 1100 return (RANDOMIZED); 1101 } 1102 inum++; 1103 } 1104 } 1105 (void) close(fd); 1106 return (NOT_RANDOMIZED); 1107 } 1108 1109 static void 1110 usage(void) 1111 { 1112 (void) fprintf(stderr, gettext( 1113 "usage: newfs [ -v ] [ mkfs-options ] raw-special-device\n")); 1114 (void) fprintf(stderr, gettext("where mkfs-options are:\n")); 1115 (void) fprintf(stderr, gettext( 1116 "\t-N do not create file system, just print out parameters\n")); 1117 (void) fprintf(stderr, gettext( 1118 "\t-T configure file system for eventual growth to over a terabyte\n")); 1119 (void) fprintf(stderr, gettext("\t-s file system size (sectors)\n")); 1120 (void) fprintf(stderr, gettext("\t-b block size\n")); 1121 (void) fprintf(stderr, gettext("\t-f frag size\n")); 1122 (void) fprintf(stderr, gettext("\t-t tracks/cylinder\n")); 1123 (void) fprintf(stderr, gettext("\t-c cylinders/group\n")); 1124 (void) fprintf(stderr, gettext("\t-m minimum free space %%\n")); 1125 (void) fprintf(stderr, gettext( 1126 "\t-o optimization preference (`space' or `time')\n")); 1127 (void) fprintf(stderr, gettext("\t-r revolutions/minute\n")); 1128 (void) fprintf(stderr, gettext("\t-i number of bytes per inode\n")); 1129 (void) fprintf(stderr, gettext( 1130 "\t-a number of alternates per cylinder\n")); 1131 (void) fprintf(stderr, gettext("\t-C maxcontig\n")); 1132 (void) fprintf(stderr, gettext("\t-d rotational delay\n")); 1133 (void) fprintf(stderr, gettext( 1134 "\t-n number of rotational positions\n")); 1135 (void) fprintf(stderr, gettext( 1136 "\t-S print a textual version of the calculated superblock to stdout\n")); 1137 (void) fprintf(stderr, gettext( 1138 "\t-B dump a binary version of the calculated superblock to stdout\n")); 1139 } 1140 1141 /* 1142 * Error-detecting version of atoi(3). Adapted from mkfs' number(). 1143 */ 1144 static unsigned int 1145 number(char *param, char *value, int flags, int def_value) 1146 { 1147 char *cs; 1148 int n; 1149 int cut = INT_MAX / 10; /* limit to avoid overflow */ 1150 int minus = 0; 1151 1152 cs = value; 1153 if (*cs == '-') { 1154 minus = 1; 1155 cs += 1; 1156 } 1157 if ((*cs < '0') || (*cs > '9')) { 1158 goto bail_out; 1159 } 1160 n = 0; 1161 while ((*cs >= '0') && (*cs <= '9') && (n <= cut)) { 1162 n = n*10 + *cs++ - '0'; 1163 } 1164 if (minus) 1165 n = -n; 1166 for (;;) { 1167 switch (*cs++) { 1168 case '\0': 1169 return (n); 1170 1171 case '0': case '1': case '2': case '3': case '4': 1172 case '5': case '6': case '7': case '8': case '9': 1173 (void) fprintf(stderr, gettext( 1174 "newfs: value for %s overflowed, using %d\n"), 1175 param, def_value); 1176 return (def_value); 1177 1178 case '%': 1179 if (flags & NR_PERCENT) 1180 break; 1181 /* FALLTHROUGH */ 1182 1183 default: 1184 bail_out: 1185 fatal(gettext("bad numeric arg for %s: \"%s\""), 1186 param, value); 1187 1188 } 1189 } 1190 /* NOTREACHED */ 1191 } 1192 1193 /* 1194 * Error-detecting version of atoi(3). Adapted from mkfs' number(). 1195 */ 1196 static int64_t 1197 number64(char *param, char *value, int flags, int64_t def_value) 1198 { 1199 char *cs; 1200 int64_t n; 1201 int64_t cut = FS_SIZE_UPPER_LIMIT/ 10; /* limit to avoid overflow */ 1202 int minus = 0; 1203 1204 cs = value; 1205 if (*cs == '-') { 1206 minus = 1; 1207 cs += 1; 1208 } 1209 if ((*cs < '0') || (*cs > '9')) { 1210 goto bail_out; 1211 } 1212 n = 0; 1213 while ((*cs >= '0') && (*cs <= '9') && (n <= cut)) { 1214 n = n*10 + *cs++ - '0'; 1215 } 1216 if (minus) 1217 n = -n; 1218 for (;;) { 1219 switch (*cs++) { 1220 case '\0': 1221 return (n); 1222 1223 case '0': case '1': case '2': case '3': case '4': 1224 case '5': case '6': case '7': case '8': case '9': 1225 (void) fprintf(stderr, gettext( 1226 "newfs: value for %s overflowed, using %d\n"), 1227 param, def_value); 1228 return (def_value); 1229 1230 case '%': 1231 if (flags & NR_PERCENT) 1232 break; 1233 /* FALLTHROUGH */ 1234 1235 default: 1236 bail_out: 1237 fatal(gettext("bad numeric arg for %s: \"%s\""), 1238 param, value); 1239 1240 } 1241 } 1242 /* NOTREACHED */ 1243 } 1244