1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21 22# 23# Copyright 2010 Sun Microsystems, Inc. All rights reserved. 24# Use is subject to license terms. 25# 26 27SYNCPROG= syncinit syncloop syncstat 28DHCPPROG= dhcpconfig dhtadm pntadm 29 30# EXPORT DELETE START 31XMODPROG= wanbootutil 32# EXPORT DELETE END 33 34PROG= 6to4relay arp gettable if_mpadm \ 35 in.comsat in.fingerd in.rarpd in.rexecd in.rlogind \ 36 in.rshd in.rwhod in.telnetd in.tftpd ipaddrsel \ 37 ndd $(SYNCPROG) $(DHCPPROG) $(XMODPROG) 38 39MANIFEST= rarp.xml telnet.xml comsat.xml finger.xml \ 40 login.xml shell.xml rexec.xml 41 42ROOTFS_PROG= hostconfig route soconfig 43SBINLINKS= hostconfig route 44 45RPCSVCPROG= hostconfig 46AUDITPROG= in.rexecd in.rlogind in.rshd in.telnetd 47PAMPROG= in.rexecd in.rlogind in.rshd in.telnetd 48SOCKETPROG= 6to4relay arp gettable hostconfig if_mpadm in.comsat \ 49 in.fingerd in.rarpd in.rexecd in.rlogind in.rshd \ 50 in.rwhod in.telnetd in.tftpd ipaddrsel route 51NSLPROG= 6to4relay arp gettable hostconfig in.comsat in.rarpd \ 52 in.rexecd in.rlogind in.rshd in.rwhod in.telnetd \ 53 in.tftpd ipaddrsel route 54CMDPROG= in.telnetd 55K5PROGS= in.telnetd in.rlogind in.rshd 56TSNETPROG= route 57DLADMPROG= 6to4relay ndd 58DEFAULTFILES= telnetd.dfl 59 60PROGSRCS= $(PROG:%=%.c) 61TFTPDOBJS= in.tftpd.o tftpsubs.o 62OTHERSRC= ../usr.bin/tftp/tftpsubs.c 63K5RLOGINOBJS= in.rlogind.o 64K5RSHDOBJS= in.rshd.o 65K5TELNETOBJS= in.telnetd.o 66SRCS= $(PROGSRCS) $(OTHERSRC) 67 68SUBDIRS= bootconfchk htable ifconfig ilbadm in.ftpd in.rdisc in.routed \ 69 in.talkd inetadm inetconv ipmpstat ipqosconf ipsecutils \ 70 kssl/kssladm kssl/ksslcfg nwamadm nwamcfg ping routeadm \ 71 snoop sppptun traceroute wificonfig 72 73MSGSUBDIRS= bootconfchk htable ifconfig ilbadm in.ftpd in.routed in.talkd \ 74 inetadm inetconv ipmpstat ipqosconf ipsecutils kssl/ksslcfg \ 75 nwamadm nwamcfg routeadm sppptun snoop wificonfig 76 77# As programs get lint-clean, add them here and to the 'lint' target. 78# Eventually this hack should go away, and all in PROG should be 79# lint-clean. 80LINTCLEAN= 6to4relay arp in.rlogind in.rshd in.telnetd in.tftpd \ 81 ipaddrsel route \ 82 in.rarpd if_mpadm $(SYNCPROG) 83# Likewise, as subdirs get lint-clean, add them here. Once 84# they're all clean, replace the dependency of the lint target 85# with SUBDIRS. Also (sigh) deal with the commented-out build lines 86# for the lint rule. 87LINTSUBDIRS= bootconfchk ilbadm in.rdisc in.routed in.talkd inetadm \ 88 inetconv ipmpstat ipqosconf ipsecutils nwamadm nwamcfg ping \ 89 routeadm sppptun traceroute wificonfig 90# And as programs are verified not to attempt to write into constants, 91# -xstrconst should be used to ensure they stay that way. 92CONSTCLEAN= 93 94include ../../Makefile.cmd 95ROOTMANIFESTDIR= $(ROOTSVCNETWORK) 96$(ROOTMANIFEST) := FILEMODE= 444 97include ../Makefile.cmd-inet 98 99ROOTSBINPROG = $(ROOTFS_PROG:%=$(ROOTSBIN)/%) 100ROOTUSRSBINLINKS = $(SBINLINKS:%=$(ROOTUSRSBIN)/%) 101 102COMMONOBJS= addr_match.o kcmd.o store_forw_creds.o 103COMMONSRCS= $(COMMONOBJS:%.o=$(CMDINETCOMMONDIR)/%.c) 104SRCS+= $(COMMONSRCS) 105 106# 107# Message catalog 108# 109POFILES= 6to4relay.po if_mpadm.po in.comsat.po ipaddrsel.po route.po 110POFILE= usr.sbin.po 111 112all:= TARGET= all 113install:= TARGET= install 114clean:= TARGET= clean 115clobber:= TARGET= clobber 116lint:= TARGET= lint 117_msg:= TARGET= _msg 118 119CLOBBERFILES += $(ROOTFS_PROG) $(PROG) 120CLEANFILES += $(COMMONOBJS) $(K5RLOGINOBJS) $(K5RSHDOBJS) $(TFTPDOBJS) 121 122CPPFLAGS += -DSYSV -DBSD_COMP -I$(CMDINETCOMMONDIR) -I 123 124include $(SRC)/lib/gss_mechs/mech_krb5/Makefile.mech_krb5 125K5LIBS= 126 127# Eventually just plain CFLAGS should be += -v, but not until all in 128# PROGS are lint clean. 129$(LINTCLEAN) := CFLAGS += $(CCVERBOSE) 130$(CONSTCLEAN) := CFLAGS += $(XSTRCONST) 131 132$(SYNCPROG) := LDLIBS += -ldlpi 133$(SOCKETPROG) := LDLIBS += -lsocket 134$(NSLPROG) := LDLIBS += -lnsl 135$(AUDITPROG) := LDLIBS += -lbsm 136$(PAMPROG) := LDLIBS += -lpam 137$(RPCSVCPROG) := LDLIBS += -lrpcsvc 138$(K5PROGS) := LDFLAGS += $(KRUNPATH) \ 139 -L$(ROOT)$(KLIBDIR_DO) -L$(ROOT)$(KLIBDIR_GL) 140$(K5PROGS) := K5LIBS= -lmech_krb5 141$(K5PROGS) := CPPFLAGS += -I$(SRC)/head \ 142 -I$(SRC)/uts/common/ \ 143 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 144 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 145 -I$(SRC)/lib/pam_modules/krb5 146LDLIBS += $(K5LIBS) 147$(TSNETPROG) := LDLIBS += -ltsnet 148$(DLADMPROG) := LDLIBS += -ldladm 149 150in.rarpd := LDLIBS += -linetutil -ldlpi 151if_mpadm := LDLIBS += -linetutil -lipmp 152if_mpadm.po := XGETFLAGS += -a 153route := CPPFLAGS += -DNDEBUG 154gettable in.comsat := LDFLAGS += $(MAPFILE.NGB:%=-M%) 155 156.KEEP_STATE: 157 158.PARALLEL: 159 160all: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) THIRDPARTYLICENSE.arp 161 162# 163# message catalog 164# 165_msg: $(MSGSUBDIRS) $(POFILE) 166 167syncutil: $(SYNCPROG) 168 169$(POFILE): $(POFILES) 170 $(RM) $@ 171 cat $(POFILES) > $@ 172 173%.o: $(CMDINETCOMMONDIR)/%.c 174 $(COMPILE.c) -o $@ $< 175 176in.telnetd: $(K5TELNETOBJS) 177 $(LINK.c) $(K5TELNETOBJS) -o $@ $(LDLIBS) 178 $(POST_PROCESS) 179 180in.rlogind: $(K5RLOGINOBJS) $(COMMONOBJS) 181 $(LINK.c) $(K5RLOGINOBJS) $(COMMONOBJS) -o $@ $(LDLIBS) 182 $(POST_PROCESS) 183 184in.rshd: $(K5RSHDOBJS) $(COMMONOBJS) 185 $(LINK.c) $(K5RSHDOBJS) $(COMMONOBJS) -o $@ $(LDLIBS) 186 $(POST_PROCESS) 187 188in.tftpd: $(TFTPDOBJS) 189 $(LINK.c) $(TFTPDOBJS) -o $@ $(LDLIBS) 190 $(POST_PROCESS) 191 192tftpsubs.o: $(OTHERSRC) 193 $(COMPILE.c) $(OTHERSRC) -o $@ 194 $(POST_PROCESS_O) 195 196$(ROOTUSRSBINLINKS): 197 -$(RM) $@; $(SYMLINK) ../../sbin/$(@F) $@ 198 199install: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) .WAIT $(ROOTUSRSBINPROG) \ 200 $(ROOTSBINPROG) $(ROOTUSRSBINLINKS) $(ROOTETCDEFAULTFILES) \ 201 $(ROOTMANIFEST) THIRDPARTYLICENSE.arp 202 203THIRDPARTYLICENSE.arp: arp.c 204 $(SED) -n '/University of California/,/SUCH DAMAGE/p' arp.c > $@ 205 206CLOBBERFILES += THIRDPARTYLICENSE.arp 207 208# 209# The reason this rule checks for the existence of the 210# Makefile is that some of the directories do not exist 211# in our exportable source builds. 212# 213$(SUBDIRS): FRC 214 @if [ -f $@/Makefile ]; then \ 215 cd $@; pwd; $(MAKE) $(TARGET); \ 216 else \ 217 true; \ 218 fi 219 220FRC: 221 222check: $(CHKMANIFEST) 223 224clean: $(SUBDIRS) 225 -$(RM) $(CLEANFILES) 226 227clobber: $(SUBDIRS) 228 -$(RM) $(CLEANFILES) $(CLOBBERFILES) 229 230lint: $(LINTSUBDIRS) 231 $(LINT.c) 6to4relay.c $(LDLIBS) -lsocket -ldladm 232 $(LINT.c) arp.c $(LDLIBS) -lsocket -lnsl 233 @# $(LINT.c) in.rexecd.c $(LDLIBS) -lbsm -lpam 234 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \ 235 -I$(SRC)/head -I$(SRC)/uts/common/ \ 236 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 237 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 238 -I$(SRC)/lib/pam_modules/krb5 \ 239 in.rlogind.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl 240 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \ 241 -I$(SRC)/head -I$(SRC)/uts/common/ \ 242 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 243 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 244 -I$(SRC)/lib/pam_modules/krb5 \ 245 in.rshd.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl 246 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 \ 247 -erroff=E_GLOBAL_COULD_BE_STATIC2 \ 248 -I$(SRC)/head -I$(SRC)/uts/common/ \ 249 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 250 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 251 -I$(SRC)/lib/pam_modules/krb5 \ 252 in.telnetd.c $(LDLIBS) -lbsm -lpam -lsocket -lnsl 253 $(LINT.c) if_mpadm.c $(LDLIBS) -lsocket -lnsl -lipmp -linetutil 254 $(LINT.c) ipaddrsel.c $(LDLIBS) -lsocket -lnsl 255 $(LINT.c) route.c $(LDLIBS) -lsocket -lnsl -ltsnet 256 $(LINT.c) syncinit.c $(LDLIBS) -ldlpi 257 $(LINT.c) syncloop.c $(LDLIBS) -ldlpi 258 $(LINT.c) syncstat.c $(LDLIBS) -ldlpi 259 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 in.rarpd.c $(LDLIBS) \ 260 -lsocket -lnsl 261 $(LINT.c) in.tftpd.c ../usr.bin/tftp/tftpsubs.c $(LDLIBS) \ 262 -lsocket -lnsl 263 264# EXPORT DELETE START 265EXPORT_SRC: 266 $(RM) Makefile+ 267 sed -e "/^# EXPORT DELETE START/,/^# EXPORT DELETE END/d" \ 268 < Makefile > Makefile+ 269 $(RM) Makefile 270 $(MV) Makefile+ Makefile 271 $(CHMOD) 444 Makefile 272# EXPORT DELETE END 273