1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License, Version 1.0 only 6# (the "License"). You may not use this file except in compliance 7# with the License. 8# 9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10# or http://www.opensolaris.org/os/licensing. 11# See the License for the specific language governing permissions 12# and limitations under the License. 13# 14# When distributing Covered Code, include this CDDL HEADER in each 15# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16# If applicable, add the following below this CDDL HEADER, with the 17# fields enclosed by brackets "[]" replaced with your own identifying 18# information: Portions Copyright [yyyy] [name of copyright owner] 19# 20# CDDL HEADER END 21# 22# 23# Copyright 2005 Sun Microsystems, Inc. All rights reserved. 24# Use is subject to license terms. 25# 26# ident "%Z%%M% %I% %E% SMI" 27# 28 29SYNCPROG= syncinit syncloop syncstat 30DHCPPROG= dhcpconfig dhtadm pntadm 31 32# EXPORT DELETE START 33XMODPROG= wanbootutil 34# EXPORT DELETE END 35 36PROG= 6to4relay arp gettable if_mpadm ikeadm ikecert \ 37 in.comsat in.fingerd in.rarpd in.rdisc in.rexecd in.rlogind \ 38 in.rshd in.rwhod in.telnetd in.tftpd in.tnamed ipaddrsel \ 39 ipsecalgs ipsecconf ipseckey ndd $(SYNCPROG) $(DHCPPROG) \ 40 $(XMODPROG) 41 42MANIFEST= rarp.xml telnet.xml comsat.xml finger.xml \ 43 login.xml shell.xml rexec.xml tname.xml 44 45ROOTFS_PROG= hostconfig route routeadm soconfig 46SBINLINKS= hostconfig route routeadm 47 48RPCSVCPROG= hostconfig 49AUDITPROG= in.rexecd in.rlogind in.rshd in.telnetd 50PAMPROG= in.rexecd in.rlogind in.rshd in.telnetd 51SOCKETPROG= 6to4relay arp gettable hostconfig if_mpadm in.comsat \ 52 in.fingerd in.rarpd in.rdisc in.rexecd in.rlogind in.rshd \ 53 in.rwhod in.telnetd in.tftpd in.tnamed ipaddrsel \ 54 ipsecalgs ipsecconf ipseckey route routeadm 55NSLPROG= 6to4relay arp gettable hostconfig ikeadm in.comsat in.rarpd \ 56 in.rdisc in.rexecd in.rlogind in.rshd in.rwhod in.telnetd \ 57 in.tftpd in.tnamed ipaddrsel ipsecalgs ipsecconf ipseckey route 58CMDPROG= in.telnetd 59IPSECUTILPROG= ikeadm ipsecalgs ipsecconf ipseckey 60K5PROGS= in.telnetd in.rlogind in.rshd 61DEFAULTFILES= telnetd.dfl 62 63PROGSRCS= $(PROG:%=%.c) 64TFTPDOBJS= in.tftpd.o tftpsubs.o 65OTHERSRC= ../usr.bin/tftp/tftpsubs.c 66K5RLOGINOBJS= in.rlogind.o 67K5RSHDOBJS= in.rshd.o 68SRCS= $(PROGSRCS) $(OTHERSRC) 69 70SUBDIRS= bootconfchk htable ifconfig in.ftpd in.routed \ 71 in.talkd inetadm inetconv ipqosconf kssl/kssladm \ 72 kssl/ksslcfg mipagentconfig mipagentstat ping snoop \ 73 sppptun traceroute 74 75MSGSUBDIRS= bootconfchk htable ifconfig in.ftpd in.routed in.talkd \ 76 inetadm inetconv ipqosconf kssl/ksslcfg mipagentconfig \ 77 mipagentstat sppptun snoop 78 79# As programs get lint-clean, add them here and to the 'lint' target. 80# Eventually this hack should go away, and all in PROG should be 81# lint-clean. 82LINTCLEAN= 6to4relay arp ikeadm in.rlogind in.rshd in.telnetd in.tftpd \ 83 ipaddrsel ipsecalgs ipseckey ipsecconf route routeadm \ 84 in.rarpd if_mpadm $(SYNCPROG) 85# Likewise, as subdirs get lint-clean, add them here. Once 86# they're all clean, replace the dependency of the lint target 87# with SUBDIRS. Also (sigh) deal with the commented-out build lines 88# for the lint rule. 89LINTSUBDIRS= bootconfchk in.routed in.talkd inetadm inetconv ipqosconf \ 90 mipagentstat ping sppptun traceroute 91# And as programs are verified not to attempt to write into constants, 92# -xstrconst should be used to ensure they stay that way. 93CONSTCLEAN= ikeadm 94 95include ../../Makefile.cmd 96ROOTMANIFESTDIR= $(ROOTSVCNETWORK) 97$(ROOTMANIFEST) := FILEMODE= 444 98include ../Makefile.cmd-inet 99 100ROOTSBINPROG = $(ROOTFS_PROG:%=$(ROOTSBIN)/%) 101ROOTUSRSBINLINKS = $(SBINLINKS:%=$(ROOTUSRSBIN)/%) 102 103COMMONOBJS= kcmd.o 104COMMONSRCS= $(CMDINETCOMMONDIR)/$(COMMONOBJS:.o=.c) 105SRCS+= $(COMMONSRCS) 106 107# 108# Message catalog 109# 110POFILES= 6to4relay.po if_mpadm.po ikeadm.po in.comsat.po ipaddrsel.po \ 111 ipsecalgs.po ipsecconf.po ipseckey.po route.po routeadm.po 112POFILE= usr.sbin.po 113 114all:= TARGET= all 115install:= TARGET= install 116clean:= TARGET= clean 117clobber:= TARGET= clobber 118lint:= TARGET= lint 119_msg:= TARGET= _msg 120 121CLOBBERFILES += $(ROOTFS_PROG) $(PROG) 122CLEANFILES += $(COMMONOBJS) $(K5RLOGINOBJS) $(K5RSHDOBJS) $(TFTPDOBJS) 123 124CPPFLAGS += -DSYSV -DBSD_COMP -I$(CMDINETCOMMONDIR) -I. 125 126include $(SRC)/lib/gss_mechs/mech_krb5/Makefile.mech_krb5 127K5LIBS= 128 129# Eventually just plain CFLAGS should be += -v, but not until all in 130# PROGS are lint clean. 131$(LINTCLEAN) := CFLAGS += $(CCVERBOSE) 132$(CONSTCLEAN) := CFLAGS += $(XSTRCONST) 133 134$(SYNCPROG) := LDLIBS += -ldlpi 135$(SOCKETPROG) := LDLIBS += -lsocket 136$(NSLPROG) := LDLIBS += -lnsl 137$(AUDITPROG) := LDLIBS += -lbsm 138$(PAMPROG) := LDLIBS += -lpam 139$(RPCSVCPROG) := LDLIBS += -lrpcsvc 140$(CMDPROG) := LDLIBS += -lcmd 141$(K5PROGS) := LDFLAGS += $(ZLAZYLOAD) $(KRUNPATH) \ 142 -L$(ROOT)$(KLIBDIR_DO) -L$(ROOT)$(KLIBDIR_GL) 143$(K5PROGS) := K5LIBS= -lmech_krb5 144$(K5PROGS) := CPPFLAGS += -I$(SRC)/head \ 145 -I$(SRC)/uts/common/ \ 146 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 147 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 148 -I$(SRC)/lib/pam_modules/krb5 149LDLIBS += $(K5LIBS) 150$(IPSECUTILPROG) := LDLIBS += -lipsecutil 151 152in.rarpd := LDLIBS += -linetutil 153route := CPPFLAGS += -DNDEBUG 154 155.KEEP_STATE: 156 157.PARALLEL: 158 159all: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) 160 161# 162# message catalog 163# 164_msg: $(MSGSUBDIRS) $(POFILE) 165 166syncutil: $(SYNCPROG) 167 168$(POFILE): $(POFILES) 169 $(RM) $@ 170 cat $(POFILES) > $@ 171 172$(COMMONOBJS): $(COMMONSRCS) 173 $(COMPILE.c) $(COMMONSRCS) 174 175in.rlogind: $(K5RLOGINOBJS) $(COMMONOBJS) 176 $(LINK.c) $(K5RLOGINOBJS) $(COMMONOBJS) -o $@ $(LDLIBS) 177 $(POST_PROCESS) 178 179in.rshd: $(K5RSHDOBJS) $(COMMONOBJS) 180 $(LINK.c) $(K5RSHDOBJS) $(COMMONOBJS) -o $@ $(LDLIBS) 181 $(POST_PROCESS) 182 183in.tftpd: $(TFTPDOBJS) 184 $(LINK.c) $(TFTPDOBJS) -o $@ $(LDLIBS) 185 $(POST_PROCESS) 186 187tftpsubs.o: $(OTHERSRC) 188 $(COMPILE.c) $(OTHERSRC) -o $@ 189 $(POST_PROCESS_O) 190 191$(ROOTUSRSBINLINKS): 192 -$(RM) $@; $(SYMLINK) ../../sbin/$(@F) $@ 193 194install: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) .WAIT $(ROOTUSRSBINPROG) \ 195 $(ROOTSBINPROG) $(ROOTUSRSBINLINKS) $(ROOTETCDEFAULTFILES) \ 196 $(ROOTMANIFEST) 197 198# 199# The reason this rule checks for the existence of the 200# Makefile is that some of the directories do not exist 201# in our exportable source builds. 202# 203$(SUBDIRS): FRC 204 @if [ -f $@/Makefile ]; then \ 205 cd $@; pwd; $(MAKE) $(TARGET); \ 206 else \ 207 true; \ 208 fi 209 210FRC: 211 212check: $(CHKMANIFEST) 213 214clean: $(SUBDIRS) 215 -$(RM) $(CLEANFILES) 216 217clobber: $(SUBDIRS) 218 -$(RM) $(CLEANFILES) $(CLOBBERFILES) 219 220lint: $(LINTSUBDIRS) 221 $(LINT.c) 6to4relay.c $(LDLIBS) -lsocket -lnsl 222 $(LINT.c) arp.c $(LDLIBS) -lsocket -lnsl 223 @# $(LINT.c) in.rexecd.c $(LDLIBS) -lbsm -lpam 224 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \ 225 -I$(SRC)/head -I$(SRC)/uts/common/ \ 226 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 227 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 228 -I$(SRC)/lib/pam_modules/krb5 \ 229 in.rlogind.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl 230 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \ 231 -I$(SRC)/head -I$(SRC)/uts/common/ \ 232 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 233 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 234 -I$(SRC)/lib/pam_modules/krb5 \ 235 in.rshd.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl 236 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 \ 237 -erroff=E_GLOBAL_COULD_BE_STATIC2 \ 238 -I$(SRC)/head -I$(SRC)/uts/common/ \ 239 -I$(SRC)/uts/common/gssapi/mechs/krb5/include \ 240 -I$(SRC)/lib/gss_mechs/mech_krb5/include \ 241 -I$(SRC)/lib/pam_modules/krb5 \ 242 in.telnetd.c $(LDLIBS) -lbsm -lpam -lsocket -lnsl 243 $(LINT.c) if_mpadm.c $(LDLIBS) -lsocket -lnsl -lipmp 244 $(LINT.c) ipaddrsel.c $(LDLIBS) -lsocket -lnsl 245 $(LINT.c) ipsecalgs.c $(LDLIBS) -lsocket -lnsl -lipsecutil 246 $(LINT.c) ipsecconf.c $(LDLIBS) -lsocket -lnsl -lipsecutil 247 $(LINT.c) ipseckey.c $(LDLIBS) -lsocket -lnsl -lipsecutil 248 $(LINT.c) ikeadm.c $(LDLIBS) -lnsl -lipsecutil 249 $(LINT.c) route.c $(LDLIBS) -lsocket -lnsl 250 $(LINT.c) routeadm.c $(LDLIBS) -lsocket 251 $(LINT.c) syncinit.c $(LDLIBS) -ldlpi 252 $(LINT.c) syncloop.c $(LDLIBS) -ldlpi 253 $(LINT.c) syncstat.c $(LDLIBS) -ldlpi 254 $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 in.rarpd.c $(LDLIBS) \ 255 -lsocket -lnsl 256 $(LINT.c) in.tftpd.c ../usr.bin/tftp/tftpsubs.c $(LDLIBS) \ 257 -lsocket -lnsl 258 259# EXPORT DELETE START 260EXPORT_SRC: 261 $(RM) Makefile+ 262 sed -e "/^# EXPORT DELETE START/,/^# EXPORT DELETE END/d" \ 263 < Makefile > Makefile+ 264 $(RM) Makefile 265 $(MV) Makefile+ Makefile 266 $(CHMOD) 444 Makefile 267# EXPORT DELETE END 268