xref: /titanic_41/usr/src/Makefile.master (revision 35a86aa15b9b2d79753a6e9a27890c7193e60958) 
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License, Version 1.0 only
6# (the "License").  You may not use this file except in compliance
7# with the License.
8#
9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10# or http://www.opensolaris.org/os/licensing.
11# See the License for the specific language governing permissions
12# and limitations under the License.
13#
14# When distributing Covered Code, include this CDDL HEADER in each
15# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16# If applicable, add the following below this CDDL HEADER, with the
17# fields enclosed by brackets "[]" replaced with your own identifying
18# information: Portions Copyright [yyyy] [name of copyright owner]
19#
20# CDDL HEADER END
21#
22#
23# Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
24# Use is subject to license terms.
25#
26# ident	"%Z%%M%	%I%	%E% SMI"
27#
28# Makefile.master, global definitions for system source
29#
30ROOT=		/proto
31
32# Historically, ON builds were always done with root permissions, and the
33# owner/group information was duplicated in the Makefiles and the packaging
34# data and kept in sync by manual intervention.  This is no longer true.
35# The only source of this information is packaging.  The proto area ($ROOT)
36# does not have definitive onwer/group information, and no Makefile should
37# attempt to set this.  CH once toggled operations restricted to root.  It
38# is now just set to `#'.
39#
40# At some point in the future, CH, CHOWN, CHGRP, OWNER, and GROUP should all
41# be stripped completely from the source base.  They are kept for now until
42# on10-based projects can merge and transition away from them.
43#
44# RELEASE_BUILD should be cleared for final release builds. This is completely
45# independent of CH. NOT_RELEASE_BUILD is exactly what the name implies.
46#
47# INTERNAL_RELEASE_BUILD is a subset of RELEASE_BUILD. It mostly controls
48# identification strings. Enabling RELEASE_BUILD automatically enables
49# INTERNAL_RELEASE_BUILD.
50#
51# EXPORT_RELEASE_BUILD controls whether binaries are built in a form that
52# can be released for export under a binary license.  It is orthogonal to
53# the other *RELEASE_BUILD settings.
54#
55# STRIP_COMMENTS toggles comment section striping. Generally the same setting
56# as INTERNAL_RELEASE_BUILD.
57#
58# STRIPFLAG is similar.  It is set here for use in lower level Makefiles to
59# allow a single point change to affect the entire build.
60#
61# __GNUC toggles the building of ON components using gcc and related tools.
62# Normally set to `#', set it to `' to do gcc build.
63#
64# The declaration POUND_SIGN is always '#'. This is needed to get around the
65# make feature that '#' is always a comment delimiter, even when escaped or
66# quoted.  The only way of generating this is the :sh macro mechanism.  Note
67# however that in general :sh macros should be avoided in makefiles that are
68# widely included into other makefiles, as the resulting shell executions can
69# cause a noticable slowdown in build times.
70#
71POUND_SIGN:sh=				echo \\043
72CH=					$(POUND_SIGN)
73
74NOT_RELEASE_BUILD=
75INTERNAL_RELEASE_BUILD=			$(POUND_SIGN)
76RELEASE_BUILD=				$(POUND_SIGN)
77EXPORT_RELEASE_BUILD=
78$(RELEASE_BUILD)NOT_RELEASE_BUILD=	$(POUND_SIGN)
79$(RELEASE_BUILD)INTERNAL_RELEASE_BUILD=
80PATCH_BUILD=				$(POUND_SIGN)
81
82# SPARC_BLD is '#' for an Intel build.
83# INTEL_BLD is '#' for a Sparc build.
84SPARC_BLD_1=    $(MACH:i386=$(POUND_SIGN))
85SPARC_BLD=      $(SPARC_BLD_1:sparc=)
86INTEL_BLD_1=    $(MACH:sparc=$(POUND_SIGN))
87INTEL_BLD=      $(INTEL_BLD_1:i386=)
88
89STRIP_COMMENTS=	$(INTERNAL_RELEASE_BUILD)
90
91# Historical notes: at one point, STRIPFLAG was set to '-s' for root builds,
92# and empty for non-root.  It's now set empty all the time, so that builds
93# using manual invocation of "make install" will have debug data (as they did
94# when run as non-root before).  The 'nightly' script overrides DEF_STRIPFLAG
95# with '-s' so that nightly builds are stripped -- since nightlies were once
96# done only as root, that preserves the known nightly behavior.  The
97# non-nightly behavior can always be overridden by putting "STRIPFLAG=" in the
98# environment, on the 'make' command line, or by overriding STRIPFLAG in the
99# subsystem Makefile itself.  STRIP_COMMENTS, although similar in nature, has
100# always been controlled by INTERNAL_RELEASE_BUILD (always set by nightly).
101
102DEF_STRIPFLAG=
103STRIPFLAG=$(DEF_STRIPFLAG)
104
105# set __GNUC= in the environment to build 32-bit with the gcc compiler.
106# The default is to use the Sun Studio 10 compiler for all processor types.
107__GNUC=		$(POUND_SIGN)
108
109# set __GNUC64= in the environment to build 64-bit with the gcc compiler.
110# The default is to use the Sun Studio 10 compiler by using the __GNUC
111# setting.
112__GNUC64=	$(__GNUC)
113
114# BUILD_TOOLS is the root of all tools including compilers.
115# ONBLD_TOOLS is the root of all the tools that are part of SUNWonbld.
116
117BUILD_TOOLS=		/ws/onnv-tools
118ONBLD_TOOLS=		$(BUILD_TOOLS)/onbld
119
120JAVA_ROOT=	/usr/java
121
122SFW_ROOT=	/usr/sfw
123SFWINCDIR=	$(SFW_ROOT)/include
124SFWLIBDIR=	$(SFW_ROOT)/lib
125SFWLIBDIR64=	$(SFW_ROOT)/lib/$(MACH64)
126
127RPCGEN=		/usr/bin/rpcgen
128STABS=		$(ONBLD_TOOLS)/bin/$(MACH)/stabs
129ECHO=		echo
130INS=		install
131TRUE=		true
132SYMLINK=	/usr/bin/ln -s
133LN=		/usr/bin/ln
134CHMOD=		/usr/bin/chmod
135CHOWN=		$(TRUE)
136CHGRP=		$(TRUE)
137MV=		/usr/bin/mv -f
138RM=		/usr/bin/rm -f
139GREP=		/usr/bin/grep
140SED=		/usr/bin/sed
141NAWK=		/usr/bin/nawk
142CP=		/usr/bin/cp -f
143MCS=		/usr/ccs/bin/mcs
144CAT=            /usr/bin/cat
145M4=		/usr/ccs/bin/m4
146STRIP=		/usr/ccs/bin/strip
147LEX=		/usr/ccs/bin/lex
148YACC=		/usr/ccs/bin/yacc
149CPP=		/usr/lib/cpp
150JAVAC=		$(JAVA_ROOT)/bin/javac
151JAVAH=		$(JAVA_ROOT)/bin/javah
152JAVADOC=	$(JAVA_ROOT)/bin/javadoc
153RMIC=		$(JAVA_ROOT)/bin/rmic
154JAR=		$(JAVA_ROOT)/bin/jar
155CTFCONVERT=	$(ONBLD_TOOLS)/bin/$(MACH)/ctfconvert
156CTFMERGE=	$(ONBLD_TOOLS)/bin/$(MACH)/ctfmerge
157CTFSTABS=	$(ONBLD_TOOLS)/bin/$(MACH)/ctfstabs
158GENOFFSETS=	$(ONBLD_TOOLS)/bin/genoffsets
159CTFCVTPTBL=	$(ONBLD_TOOLS)/bin/ctfcvtptbl
160CTFFINDMOD=	$(ONBLD_TOOLS)/bin/ctffindmod
161XREF=		$(ONBLD_TOOLS)/bin/xref
162FIND=		/usr/bin/find
163PERL=		/usr/bin/perl
164SORT=		/usr/bin/sort
165TOUCH=		/usr/bin/touch
166WC=		/usr/bin/wc
167XARGS=		/usr/bin/xargs
168ELFSIGN=	/usr/bin/elfsign
169DTRACE=		/usr/sbin/dtrace
170
171FILEMODE=	644
172DIRMODE=	755
173
174# Note: owner and group for proto area objects is no longer set by
175# Makefiles at all.  These have no real effect and are kept here for
176# transition purposes.  They (along with CH, CHOWN, and CHGRP) should be
177# removed early in the s11 development cycle.
178OWNER=		root
179GROUP=		bin
180
181#
182# The version of the patch makeup table optimized for build-time use.  Used
183# during patch builds only.
184$(PATCH_BUILD)PMTMO_FILE=$(SRC)/patch_makeup_table.mo
185
186# Declare that nothing should be built in parallel.
187# Individual Makefiles can use the .PARALLEL target to declare otherwise.
188.NO_PARALLEL:
189
190# For stylistic checks
191#
192# Note that the X and C checks are not used at this time and may need
193# modification when they are actually used.
194#
195CSTYLE=		cstyle
196CSTYLE_TAIL=
197HDRCHK=		hdrchk
198HDRCHK_TAIL=
199JSTYLE=		jstyle
200
201DOT_H_CHECK=	\
202	@$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL); \
203	$(HDRCHK) $< $(HDRCHK_TAIL)
204
205DOT_X_CHECK=	\
206	@$(ECHO) "checking $<"; $(RPCGEN) -C -h $< | $(CSTYLE) $(CSTYLE_TAIL); \
207	$(RPCGEN) -C -h $< | $(HDRCHK) $< $(HDRCHK_TAIL)
208
209DOT_C_CHECK=	\
210	@$(ECHO) "checking $<"; $(CSTYLE) $< $(CSTYLE_TAIL)
211
212MANIFEST_CHECK=	\
213	@$(ECHO) "checking $<"; \
214	SVCCFG_DTD=$(SRC)/cmd/svc/dtd/service_bundle.dtd.1 \
215	$(SRC)/cmd/svc/svccfg/svccfg-native validate $<
216
217INS.file=	$(RM) $@; $(INS) -s -m $(FILEMODE) -f $(@D) $<
218INS.dir=	$(INS) -s -d -m $(DIRMODE) $@
219# installs and renames at once
220#
221INS.rename=	$(INS.file); $(MV) $(@D)/$(<F) $@
222
223# install a link
224INSLINKTARGET=	$<
225INS.link=	$(RM) $@; $(LN) $(INSLINKTARGET) $@
226
227# MACH must be set in the shell environment per uname -p on the build host
228# More specific architecture variables should be set in lower makefiles.
229#
230# MACH64 is derived from MACH, and BUILD64 is set to `#' for
231# architectures on which we do not build 64-bit versions.
232# (There are no such architectures at the moment.)
233#
234# Set BUILD64=# in the environment to disable 64-bit amd64
235# builds on i386 machines.
236
237MACH64_1=	$(MACH:sparc=sparcv9)
238MACH64=		$(MACH64_1:i386=amd64)
239
240MACH32_1=	$(MACH:sparc=sparcv7)
241MACH32=		$(MACH32_1:i386=i86)
242
243sparc_BUILD64=
244i386_BUILD64=
245BUILD64=	$($(MACH)_BUILD64)
246
247#
248# C compiler mode. Future compilers may change the default on us,
249# so force extended ANSI mode globally. Lower level makefiles can
250# override this by setting CCMODE.
251#
252CCMODE=			-Xa
253CCMODE64=		-Xa
254
255#
256# C compiler verbose mode. This is so we can enable it globally,
257# but turn it off in the lower level makefiles of things we cannot
258# (or aren't going to) fix.
259#
260CCVERBOSE=		-v
261
262# set this to the secret flag "-Wc,-Qiselect-v9abiwarn=1" to get warnings
263# from the compiler about places the -xarch=v9 may differ from -xarch=v9c.
264V9ABIWARN=
265
266# set this to the secret flag "-Wc,-Qiselect-regsym=0" to disable register
267# symbols (used to detect conflicts between objects that use global registers)
268# we disable this now for safety, and because genunix doesn't link with
269# this feature (the v9 default) enabled.
270#
271# REGSYM is separate since the C++ driver syntax is different.
272CCREGSYM=		-Wc,-Qiselect-regsym=0
273CCCREGSYM=		-Qoption cg -Qiselect-regsym=0
274
275#
276# generate 32-bit addresses in the v9 kernel. Saves memory.
277CCABS32=		-Wc,-xcode=abs32
278
279# One optimization the compiler might perform is to turn this:
280#	#pragma weak foo
281#	extern int foo;
282#	if (&foo)
283#		foo = 5;
284# into
285#	foo = 5;
286# Since we do some of this (foo might be referenced in common kernel code
287# but provided only for some cpu modules or platforms), we disable this
288# optimization.
289#
290sparc_CCUNBOUND	= -Wd,-xsafe=unboundsym
291i386_CCUNBOUND	=
292CCUNBOUND	= $($(MACH)_CCUNBOUND)
293
294#
295# compiler '-xarch' flag. This is here to centralize it and make it
296# overridable for testing.
297sparc_XARCH=		-xarch=v8
298sparcv9_XARCH=		-xarch=v9
299i386_XARCH=
300amd64_XARCH=		-xarch=amd64 -Ui386 -U__i386
301
302# assembler '-xarch' flag.  Different from compiler '-xarch' flag.
303sparc_AS_XARCH=		-xarch=v8
304sparcv9_AS_XARCH=	-xarch=v9
305i386_AS_XARCH=
306amd64_AS_XARCH=		-xarch=amd64 -P -Ui386 -U__i386
307
308#
309# These flags define what we need to be 'standalone' i.e. -not- part
310# of the rather more cosy userland environment.  This basically means
311# the kernel.
312#
313# XX64	future versions of gcc will make -mcmodel=kernel imply -mno-red-zone
314#
315sparc_STAND_FLAGS=
316sparcv9_STAND_FLAGS=
317i386_STAND_FLAGS=	-_gcc=-ffreestanding
318amd64_STAND_FLAGS=	-Wu,-xmodel=kernel
319
320SAVEARGS=		-Wu,-save_args
321$(__GNUC64)SAVEARGS=
322amd64_STAND_FLAGS	+= $(SAVEARGS)
323
324STAND_FLAGS_32 = $($(MACH)_STAND_FLAGS)
325STAND_FLAGS_64 = $($(MACH64)_STAND_FLAGS)
326
327#
328# disable the incremental linker
329ILDOFF=			-xildoff
330#
331XDEPEND=		-xdepend
332XFFLAG=			-xF
333XESS=			-xs
334XSTRCONST=		-xstrconst
335
336#
337# turn warnings into errors (C)
338CERRWARN = -errtags=yes -errwarn=%all
339CERRWARN += -erroff=E_EMPTY_TRANSLATION_UNIT
340CERRWARN += -erroff=E_STATEMENT_NOT_REACHED
341
342#
343# turn warnings into errors (C++)
344CCERRWARN=		-xwe
345
346# C99 mode
347C99_ENABLE=	-xc99=%all
348C99_DISABLE=	-xc99=%none
349C99MODE=	$(C99_DISABLE)
350C99LMODE=	$(C99MODE:-xc99%=-Xc99%)
351
352# In most places, assignments to these macros should be appended with +=
353# (CPPFLAGS.master allows values to be prepended to CPPFLAGS).
354sparc_CFLAGS=	$(sparc_XARCH)
355sparcv9_CFLAGS=	$(sparcv9_XARCH) -dalign $(CCVERBOSE) $(V9ABIWARN) $(CCREGSYM)
356i386_CFLAGS=	$(i386_XARCH)
357amd64_CFLAGS=	$(amd64_XARCH)
358
359sparc_ASFLAGS=	$(sparc_AS_XARCH)
360sparcv9_ASFLAGS=$(sparcv9_AS_XARCH)
361i386_ASFLAGS=	$(i386_AS_XARCH)
362amd64_ASFLAGS=	$(amd64_AS_XARCH)
363
364#
365sparc_COPTFLAG=		-xO3
366sparcv9_COPTFLAG=	-xO3
367i386_COPTFLAG=		-O
368amd64_COPTFLAG=		-xO3
369
370COPTFLAG= $($(MACH)_COPTFLAG)
371COPTFLAG64= $($(MACH64)_COPTFLAG)
372
373# When -g is used, the compiler globalizes static objects
374# (gives them a unique prefix). Disable that.
375CNOGLOBAL= -W0,-noglobal
376
377#
378# Flags used to build in debug mode for ctf generation.  Bugs in the Devpro
379# compilers currently prevent us from building with cc-emitted DWARF.
380#
381CTF_FLAGS_sparc	= -g -Wc,-Qiselect-T1 $(C99MODE) $(CNOGLOBAL)
382CTF_FLAGS_i386	= -g $(C99MODE) $(CNOGLOBAL)
383CTF_FLAGS	= $(CTF_FLAGS_$(MACH))
384
385#
386# Flags used with genoffsets
387#
388GOFLAGS = -_noecho \
389	-_gcc=-fno-eliminate-unused-debug-symbols \
390	-_gcc=-fno-eliminate-unused-debug-types
391
392OFFSETS_CREATE = $(GENOFFSETS) -s $(CTFSTABS) -r $(CTFCONVERT) \
393	$(CC) $(GOFLAGS) $(CFLAGS) $(CPPFLAGS)
394
395OFFSETS_CREATE64 = $(GENOFFSETS) -s $(CTFSTABS) -r $(CTFCONVERT) \
396	$(CC) $(GOFLAGS) $(CFLAGS64) $(CPPFLAGS)
397
398#
399# tradeoff time for space (smaller is better)
400#
401sparc_SPACEFLAG		= -xspace -W0,-Lt -W2,-Rcond_elim
402sparcv9_SPACEFLAG	= -xspace -W0,-Lt -W2,-Rcond_elim
403i386_SPACEFLAG		= -xspace
404amd64_SPACEFLAG		=
405
406SPACEFLAG		= $($(MACH)_SPACEFLAG)
407SPACEFLAG64		= $($(MACH64)_SPACEFLAG)
408
409sparc_XREGSFLAG		= -xregs=no%appl
410sparcv9_XREGSFLAG	= -xregs=no%appl
411i386_XREGSFLAG		=
412amd64_XREGSFLAG		=
413
414XREGSFLAG		= $($(MACH)_XREGSFLAG)
415XREGSFLAG64		= $($(MACH64)_XREGSFLAG)
416
417CFLAGS=         $(COPTFLAG) $($(MACH)_CFLAGS) $(SPACEFLAG) $(CCMODE) \
418		$(ILDOFF) $(CERRWARN) $(C99MODE) $(CCUNBOUND)
419CFLAGS64=       $(COPTFLAG64) $($(MACH64)_CFLAGS) $(SPACEFLAG64) $(CCMODE64) \
420		$(ILDOFF) $(CERRWARN) $(C99MODE) $(CCUNBOUND)
421NATIVE_CFLAGS=	$(COPTFLAG) $($(NATIVE_MACH)_CFLAGS) $(CCMODE) \
422		$(ILDOFF) $(CERRWARN) $(C99MODE) $($(NATIVE_MACH)_CCUNBOUND)
423
424DTEXTDOM=-DTEXT_DOMAIN=\"$(TEXT_DOMAIN)\"	# For messaging.
425DTS_ERRNO=-D_TS_ERRNO
426CPPFLAGS.master=$(DTEXTDOM) $(DTS_ERRNO) \
427	$(ENVCPPFLAGS1) $(ENVCPPFLAGS2) $(ENVCPPFLAGS3) $(ENVCPPFLAGS4)
428CPPFLAGS=	$(CPPFLAGS.master)
429AS_CPPFLAGS=	$(CPPFLAGS.master)
430JAVAFLAGS=	-deprecation
431
432#
433# For source message catalogue
434#
435.SUFFIXES: $(SUFFIXES) .i .po
436MSGROOT= $(ROOT)/catalog
437MSGDOMAIN= $(MSGROOT)/$(TEXT_DOMAIN)
438MSGDOMAINPOFILE = $(MSGDOMAIN)/$(POFILE)
439DCMSGDOMAIN= $(MSGROOT)/LC_TIME/$(TEXT_DOMAIN)
440DCMSGDOMAINPOFILE = $(DCMSGDOMAIN)/$(DCFILE:.dc=.po)
441
442CLOBBERFILES += $(POFILE) $(POFILES)
443COMPILE.cpp= $(CC) -E -C $(CFLAGS) $(CPPFLAGS)
444XGETTEXT= /usr/bin/xgettext
445XGETFLAGS= -c TRANSLATION_NOTE
446BUILD.po= $(XGETTEXT) $(XGETFLAGS) -d $(<F) $<.i ;\
447	$(RM)	$@ ;\
448	sed "/^domain/d" < $(<F).po > $@ ;\
449	$(RM) $(<F).po $<.i
450#
451# This is overwritten by local Makefile when PROG is a list.
452#
453POFILE= $(PROG).po
454
455sparc_CCFLAGS=		-cg92 -compat=4 \
456			-Qoption ccfe -messages=no%anachronism \
457			$(CCERRWARN)
458sparcv9_CCFLAGS=	$(sparcv9_XARCH) -dalign -compat=5 \
459			-Qoption ccfe -messages=no%anachronism \
460			-Qoption ccfe -features=no%conststrings \
461			$(CCCREGSYM) \
462			$(CCERRWARN)
463i386_CCFLAGS=		-compat=4 \
464			-Qoption ccfe -messages=no%anachronism \
465			-Qoption ccfe -features=no%conststrings \
466			$(CCERRWARN)
467amd64_CCFLAGS=		$(amd64_XARCH) -compat=5 \
468			-Qoption ccfe -messages=no%anachronism \
469			-Qoption ccfe -features=no%conststrings \
470			$(CCERRWARN)
471
472sparc_CCOPTFLAG=	-O
473sparcv9_CCOPTFLAG=	-O
474i386_CCOPTFLAG=		-O
475amd64_CCOPTFLAG=	-O
476
477CCOPTFLAG=	$($(MACH)_CCOPTFLAG)
478CCOPTFLAG64=	$($(MACH64)_CCOPTFLAG)
479CCFLAGS=	$(CCOPTFLAG) $($(MACH)_CCFLAGS)
480CCFLAGS64=	$(CCOPTFLAG64) $($(MACH64)_CCFLAGS)
481#
482# Used by Makefile.cmd, Makefile.lib and Makefile.ucbcmd
483#
484PGA_MAPFILE =	$(SRC)/cmd/sgs/mapfiles/$(MACH)/map.pagealign
485#
486#
487# LDLIBS32 can be set in the environment to override the following assignment.
488# LDLIBS64 can be set to override the assignment made in Makefile.master.64.
489# These environment settings make sure that no libraries are searched outside
490# of the local workspace proto area:
491#	LDLIBS32=-YP,$ROOT/lib:$ROOT/usr/lib
492#	LDLIBS64=-YP,$ROOT/lib/$MACH64:$ROOT/usr/lib/$MACH64
493#
494LDLIBS32 =	$(ENVLDLIBS1) $(ENVLDLIBS2) $(ENVLDLIBS3)
495LDLIBS.cmd = 	$(LDLIBS32)
496LDLIBS.lib =	$(LDLIBS32)
497#
498# Define compilation macros.
499#
500COMPILE.c=	$(CC) $(CFLAGS) $(CPPFLAGS) -c
501COMPILE64.c=	$(CC) $(CFLAGS64) $(CPPFLAGS) -c
502COMPILE.cc=	$(CCC) $(CCFLAGS) $(CPPFLAGS) -c
503COMPILE64.cc=	$(CCC) $(CCFLAGS64) $(CPPFLAGS) -c
504COMPILE.s=	$(AS) $(ASFLAGS) $(AS_CPPFLAGS)
505COMPILE64.s=	$(AS) $(ASFLAGS) $($(MACH64)_AS_XARCH) $(AS_CPPFLAGS)
506COMPILE.d=	$(DTRACE) -G -32
507COMPILE64.d=	$(DTRACE) -G -64
508
509CLASSPATH=	.
510COMPILE.java=	$(JAVAC) $(JAVAFLAGS) -classpath $(CLASSPATH)
511
512#
513# Link time macros
514#
515CCNEEDED		= -lC
516$(__GNUC)CCNEEDED	= -L$(SFWLIBDIR) -R$(SFWLIBDIR) -lstdc++ -lgcc_s
517
518LINK.c=		$(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS)
519LINK64.c=	$(CC) $(CFLAGS64) $(CPPFLAGS) $(LDFLAGS)
520NORUNPATH=	-norunpath -nolib
521LINK.cc=	$(CCC) $(CCFLAGS) $(CPPFLAGS) $(NORUNPATH) \
522		$(LDFLAGS) $(CCNEEDED)
523LINK64.cc=	$(CCC) $(CCFLAGS64) $(CPPFLAGS) $(NORUNPATH) \
524		$(LDFLAGS) $(CCNEEDED)
525
526#
527# lint macros
528#
529# Note that the undefine of __PRAGMA_REDEFINE_EXTNAME can be removed once
530# ON is built with a version of lint that has the fix for 4484186.
531#
532ALWAYS_LINT_DEFS =	-errtags=yes -s
533ALWAYS_LINT_DEFS +=	-erroff=E_PTRDIFF_OVERFLOW
534ALWAYS_LINT_DEFS +=	-erroff=E_ASSIGN_NARROW_CONV
535ALWAYS_LINT_DEFS +=	-U__PRAGMA_REDEFINE_EXTNAME
536ALWAYS_LINT_DEFS +=	$(C99LMODE)
537ALWAYS_LINT_DEFS +=	-errsecurity=$(SECLEVEL)
538ALWAYS_LINT_DEFS +=	-erroff=E_SEC_CREAT_WITHOUT_EXCL
539ALWAYS_LINT_DEFS +=	-erroff=E_SEC_FORBIDDEN_WARN_CREAT
540# XX64 -- really only needed for amd64 lint
541ALWAYS_LINT_DEFS +=	-erroff=E_ASSIGN_INT_TO_SMALL_INT
542ALWAYS_LINT_DEFS +=	-erroff=E_CAST_INT_CONST_TO_SMALL_INT
543ALWAYS_LINT_DEFS +=	-erroff=E_CAST_INT_TO_SMALL_INT
544ALWAYS_LINT_DEFS +=	-erroff=E_CAST_TO_PTR_FROM_INT
545ALWAYS_LINT_DEFS +=	-erroff=E_COMP_INT_WITH_LARGE_INT
546ALWAYS_LINT_DEFS +=	-erroff=E_INTEGRAL_CONST_EXP_EXPECTED
547ALWAYS_LINT_DEFS +=	-erroff=E_PASS_INT_TO_SMALL_INT
548ALWAYS_LINT_DEFS +=	-erroff=E_PTR_CONV_LOSES_BITS
549
550SECLEVEL=	core
551LINT.c=		$(LINT) $(LINTFLAGS) $(CPPFLAGS) $(ALWAYS_LINT_DEFS)
552LINT64.c=	$(LINT) $(LINTFLAGS64) $(CPPFLAGS) $(ALWAYS_LINT_DEFS)
553LINT.s=		$(LINT.c)
554
555# For some future builds, NATIVE_MACH and MACH might be different.
556# Therefore, NATIVE_MACH needs to be redefined in the
557# environment as `uname -p` to override this macro.
558#
559# For now at least, we cross-compile amd64 on i386 machines.
560NATIVE_MACH=	$(MACH:amd64=i386)
561
562# Define native compilation macros
563#
564
565# Base directory where compilers are loaded.
566# Defined here so it can be overridden by developer.
567#
568SPRO_ROOT=		$(BUILD_TOOLS)/SUNWspro
569SPRO_VROOT=		$(SPRO_ROOT)/SOS10
570GNU_ROOT=		$(SFW_ROOT)
571
572# Specify platform compiler versions for languages
573# that we use (currently only c and c++).
574#
575sparc_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
576$(__GNUC)sparc_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
577sparc_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
578$(__GNUC)sparc_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
579sparc_CPP=		/usr/ccs/lib/cpp
580sparc_AS=		/usr/ccs/bin/as -xregsym=no
581sparc_LD=		/usr/ccs/bin/ld
582sparc_LINT=		$(SPRO_VROOT)/bin/lint
583
584sparcv9_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
585$(__GNUC64)sparcv9_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
586sparcv9_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
587$(__GNUC64)sparcv9_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
588sparcv9_CPP=		/usr/ccs/lib/cpp
589sparcv9_AS=		/usr/ccs/bin/as -xregsym=no
590sparcv9_LD=		/usr/ccs/bin/ld
591sparcv9_LINT=		$(SPRO_VROOT)/bin/lint
592
593# We compile 32-bit objects with cc by default
594i386_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
595$(__GNUC)i386_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
596i386_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
597$(__GNUC)i386_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
598i386_CPP=		/usr/ccs/lib/cpp
599i386_AS=		/usr/ccs/bin/as
600$(__GNUC)i386_AS=	$(ONBLD_TOOLS)/bin/$(MACH)/aw
601i386_LD=		/usr/ccs/bin/ld
602i386_LINT=		$(SPRO_VROOT)/bin/lint
603
604# We compile 64-bit objects with gcc
605amd64_CC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_cc
606$(__GNUC64)amd64_CC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_gcc
607amd64_CCC=		$(ONBLD_TOOLS)/bin/$(MACH)/cw -_CC
608$(__GNUC64)amd64_CCC=	$(ONBLD_TOOLS)/bin/$(MACH)/cw -_g++
609amd64_CPP=		/usr/ccs/lib/cpp
610amd64_AS=		$(ONBLD_TOOLS)/bin/$(MACH)/aw
611amd64_LD=		/usr/ccs/bin/ld
612amd64_LINT=		$(SPRO_VROOT)/bin/lint
613
614NATIVECC=		$($(NATIVE_MACH)_CC)
615NATIVECCC=		$($(NATIVE_MACH)_CCC)
616NATIVECPP=		$($(NATIVE_MACH)_CPP)
617NATIVEAS=		$($(NATIVE_MACH)_AS)
618NATIVELD=		$($(NATIVE_MACH)_LD)
619NATIVELINT=		$($(NATIVE_MACH)_LINT)
620
621#
622# Makefile.master.64 overrides these settings
623#
624CC=			$(NATIVECC)
625CCC=			$(NATIVECCC)
626CPP=			$(NATIVECPP)
627AS=			$(NATIVEAS)
628LD=			$(NATIVELD)
629LINT=			$(NATIVELINT)
630
631# Pass -Y flag to cpp (method of which is release-dependent)
632CCYFLAG=		-Y I,
633
634BDIRECT=	-Bdirect
635BDYNAMIC=	-Bdynamic
636BLOCAL=		-Blocal
637BREDUCE=	-Breduce
638BSTATIC=	-Bstatic
639BSYMBOLIC=	-Bsymbolic
640
641ZCOMBRELOC=	-zcombreloc
642ZDEFS=		-zdefs
643ZIGNORE=	-zignore
644ZINITFIRST=	-zinitfirst
645ZINTERPOSE=	-zinterpose
646ZLAZYLOAD=	-zlazyload
647ZLOADFLTR=	-zloadfltr
648ZMULDEFS=	-zmuldefs
649ZNODEFAULTLIB=	-znodefaultlib
650ZNODEFS=	-znodefs
651ZNODELETE=	-znodelete
652ZNODLOPEN=	-znodlopen
653ZNODUMP=	-znodump
654ZNOLAZYLOAD=	-znolazyload
655ZNOVERSION=	-znoversion
656ZREDLOCSYM=	-zredlocsym
657ZTEXT=		-ztext
658
659GSHARED=	-G
660CCMT=		-mt
661
662# Handle different PIC models on different ISAs
663# (May be overridden by lower-level Makefiles)
664
665sparc_C_PICFLAGS =	-K pic
666sparcv9_C_PICFLAGS =	-K pic
667i386_C_PICFLAGS =	-K pic
668amd64_C_PICFLAGS =	-K pic
669C_PICFLAGS =		$($(MACH)_C_PICFLAGS)
670C_PICFLAGS64 =		$($(MACH64)_C_PICFLAGS)
671
672sparc_C_BIGPICFLAGS =	-K PIC
673sparcv9_C_BIGPICFLAGS =	-K PIC
674i386_C_BIGPICFLAGS =	-K PIC
675amd64_C_BIGPICFLAGS =	-K PIC
676C_BIGPICFLAGS =		$($(MACH)_C_BIGPICFLAGS)
677C_BIGPICFLAGS64 =	$($(MACH64)_C_BIGPICFLAGS)
678
679# CC requires there to be no space between '-K' and 'pic' or 'PIC'.
680sparc_CC_PICFLAGS =	-Kpic
681sparcv9_CC_PICFLAGS =	-KPIC
682i386_CC_PICFLAGS = 	-Kpic
683amd64_CC_PICFLAGS = 	-Kpic
684CC_PICFLAGS =		$($(MACH)_CC_PICFLAGS)
685CC_PICFLAGS64 =		$($(MACH64)_CC_PICFLAGS)
686
687AS_PICFLAGS=		$(C_PICFLAGS)
688AS_BIGPICFLAGS=		$(C_BIGPICFLAGS)
689
690#
691# Default label for CTF sections
692#
693CTFCVTFLAGS=		-i -L VERSION
694
695#
696# Override to pass module-specific flags to ctfmerge.  Currently used
697# only by krtld to turn on fuzzy matching.
698#
699CTFMRGFLAGS=
700
701CTFCONVERT_O		= $(CTFCONVERT) $(CTFCVTFLAGS) $@
702
703ELFSIGN_O=	$(TRUE)
704ELFSIGN_CRYPTO=	$(ELFSIGN_O)
705ELFSIGN_OBJECT=	$(ELFSIGN_O)
706# EXPORT DELETE START
707# Note: The setting of ELFSIGN_O, etc. to $(TRUE) above must stay outside
708# of the export src markers.  The real setting for non source product builds
709# is inside the markers.
710# This is needed to reduce the amount of changes to Makefiles elsewhere
711# in the source tree (particularly in uts/{sparc,intel})
712ELFSIGN_O =	$(ELFSIGN)
713ELFSIGN_KEY =	$(SRC)/cmd/cmd-crypto/etc/keys/SUNWosnet
714ELFSIGN_CERT=	$(SRC)/cmd/cmd-crypto/etc/certs/SUNWosnet
715ELFSIGN_SEKEY =	$(SRC)/cmd/cmd-crypto/etc/keys/SUNWosnetSolaris
716ELFSIGN_SECERT=	$(SRC)/cmd/cmd-crypto/etc/certs/SUNWosnetSolaris
717ELFSIGN_CRYPTO=	$(ELFSIGN_O) sign $(ELFSIGN_FORMAT_OPTION) \
718			-k $(ELFSIGN_KEY) -c $(ELFSIGN_CERT) -e $@
719ELFSIGN_OBJECT=	$(ELFSIGN_O) sign $(ELFSIGN_FORMAT_OPTION) \
720			-k $(ELFSIGN_SEKEY) -c $(ELFSIGN_SECERT) -e $@
721# EXPORT DELETE END
722
723# Rules (normally from make.rules) and macros which are used for post
724# processing files. Normally, these do stripping of the comment section
725# automatically.
726#    RELEASE_CM:	Should be editted to reflect the release.
727#    POST_PROCESS_O:	Post-processing for `.o' files.
728#    POST_PROCESS_A:	Post-processing for `.a' files (currently null).
729#    POST_PROCESS_SO:	Post-processing for `.so' files.
730#    POST_PROCESS:	Post-processing for executable files (no suffix).
731# Note that these macros are not completely generalized as they are to be
732# used with the file name to be processed following.
733#
734# It is left as an exercise to Release Engineering to embellish the generation
735# of the release comment string.
736#
737#	If this is a standard development build:
738#		compress the comment section (mcs -c)
739#		add the standard comment (mcs -a $(RELEASE_CM))
740#		add the development specific comment (mcs -a $(DEV_CM))
741#
742#	If this is an installation build:
743#		delete the comment section (mcs -d)
744#		add the standard comment (mcs -a $(RELEASE_CM))
745#		add the development specific comment (mcs -a $(DEV_CM))
746#
747#	If this is an release build:
748#		delete the comment section (mcs -d)
749#		add the standard comment (mcs -a $(RELEASE_CM))
750#
751#	The ONVERS macro sets the default value for the VERSION string
752#	within pkginfo.
753#
754# The following list of macros are used in the definition of RELEASE_CM
755# which is used to label all binaries in the build:
756#
757# 	RELEASE		Specific release of the build, eg: 5.2
758#	VERSION		Version of the build (alpha, beta, Generic)
759#	PATCHID		If this is a patch this value should contain
760#			the patchid value (eg: "Generic 100832-01"), otherwise
761#			it will be set to $(VERSION)
762#	RELEASE_DATE	Date of the Release Build
763#	PATCH_DATE	Date the patch was created, if this is blank it
764#			will default to the RELEASE_DATE
765#
766ONVERS=		"11.11"
767RELEASE=	5.11
768VERSION=	SunOS Development
769PATCHID=	$(VERSION)
770RELEASE_DATE=	October 2007
771PATCH_DATE=	$(RELEASE_DATE)
772RELEASE_CM=	"@($(POUND_SIGN))SunOS $(RELEASE) $(PATCHID) $(PATCH_DATE)"
773DEV_CM=		"@($(POUND_SIGN))SunOS Internal Development: \
774`$(ECHO) $$LOGNAME` `date +%Y-%m-%d` `$(ECHO) [\`basename $$CODEMGR_WS\`]`"
775
776PROCESS_COMMENT=		   @?${MCS} -c -a $(RELEASE_CM) -a $(DEV_CM)
777$(STRIP_COMMENTS)PROCESS_COMMENT=  @?${MCS} -d -a $(RELEASE_CM) -a $(DEV_CM)
778$(RELEASE_BUILD)PROCESS_COMMENT=   @?${MCS} -d -a $(RELEASE_CM)
779
780STRIP_STABS=			   :
781$(RELEASE_BUILD)STRIP_STABS=	   $(STRIP) -x $@
782
783POST_PROCESS_O=		$(PROCESS_COMMENT) $@
784POST_PROCESS_A=
785POST_PROCESS_SO=	$(PROCESS_COMMENT) $@ ; $(STRIP_STABS) ; \
786			$(ELFSIGN_OBJECT)
787POST_PROCESS=		$(PROCESS_COMMENT) $@ ; $(ELFSIGN_OBJECT)
788
789#
790# The PKGDEFS macro points to the source directory containing the majority
791# of ON's package definitions plus Makefiles with general package creation
792# rules.
793#
794# PKGARCHIVE specifies the default location where packages should be
795# placed if built.
796#
797PKGDEFS=$(SRC)/pkgdefs
798$(RELEASE_BUILD)PKGARCHIVESUFFIX=	-nd
799PKGARCHIVE=$(SRC)/../../packages/$(MACH)/nightly$(PKGARCHIVESUFFIX)
800
801#	Default build rules which perform comment section post-processing.
802#
803.c:
804	$(LINK.c) -o $@ $< $(LDLIBS)
805	$(POST_PROCESS)
806.c.o:
807	$(COMPILE.c) $(OUTPUT_OPTION) $< $(CTFCONVERT_HOOK)
808	$(POST_PROCESS_O)
809.c.a:
810	$(COMPILE.c) -o $% $<
811	$(PROCESS_COMMENT) $%
812	$(AR) $(ARFLAGS) $@ $%
813	$(RM) $%
814.s.o:
815	$(COMPILE.s) -o $@ $<
816	$(POST_PROCESS_O)
817.s.a:
818	$(COMPILE.s) -o $% $<
819	$(PROCESS_COMMENT) $%
820	$(AR) $(ARFLAGS) $@ $%
821	$(RM) $%
822.cc:
823	$(LINK.cc) -o $@ $< $(LDLIBS)
824	$(POST_PROCESS)
825.cc.o:
826	$(COMPILE.cc) $(OUTPUT_OPTION) $<
827	$(POST_PROCESS_O)
828.cc.a:
829	$(COMPILE.cc) -o $% $<
830	$(AR) $(ARFLAGS) $@ $%
831	$(PROCESS_COMMENT) $%
832	$(RM) $%
833.y:
834	$(YACC.y) $<
835	$(LINK.c) -o $@ y.tab.c $(LDLIBS)
836	$(POST_PROCESS)
837	$(RM) y.tab.c
838.y.o:
839	$(YACC.y) $<
840	$(COMPILE.c) -o $@ y.tab.c $(CTFCONVERT_HOOK)
841	$(POST_PROCESS_O)
842	$(RM) y.tab.c
843.l:
844	$(RM) $*.c
845	$(LEX.l) $< > $*.c
846	$(LINK.c) -o $@ $*.c -ll $(LDLIBS)
847	$(POST_PROCESS)
848	$(RM) $*.c
849.l.o:
850	$(RM) $*.c
851	$(LEX.l) $< > $*.c
852	$(COMPILE.c) -o $@ $*.c $(CTFCONVERT_HOOK)
853	$(POST_PROCESS_O)
854	$(RM) $*.c
855
856.java.class:
857	$(COMPILE.java) $<
858
859#
860# Rules to create message catalogue files from .sh, .c, .y, and .l files.
861# For .sh files, we extract all gettext strings with sed(1) (being careful
862# to permit multiple gettext strings on the same line), weed out the dups,
863# and build the catalogue with awk(1).
864#
865
866.sh.po:
867	$(SED) -n -e ":a" 					\
868		  -e "h" 					\
869		  -e "s/.*gettext *\(\"[^\"]*\"\).*/\1/p"	\
870		  -e "x"					\
871		  -e "s/\(.*\)gettext *\"[^\"]*\"\(.*\)/\1\2/"	\
872		  -e "t a"					\
873	       $< | sort -u | awk '{ print "msgid\t" $$0 "\nmsgstr" }' > $@
874
875#
876# When using xgettext, we want messages to go to the default domain,
877# rather than the specified one.  This special version of the
878# COMPILE.cpp macro effectively prevents expansion of TEXT_DOMAIN,
879# causing xgettext to put all messages into the default domain.
880#
881CPPFORPO=$(COMPILE.cpp:\"$(TEXT_DOMAIN)\"=TEXT_DOMAIN)
882
883.c.i:
884	$(CPPFORPO) $< > $@
885
886.h.i:
887	$(CPPFORPO) $< > $@
888
889.y.i:
890	$(YACC) -d $<
891	$(CPPFORPO) y.tab.c  > $@
892	$(RM) y.tab.c
893
894.l.i:
895	$(LEX) $<
896	$(CPPFORPO) lex.yy.c  > $@
897	$(RM) lex.yy.c
898
899.c.po:
900	$(CPPFORPO) $< > $<.i
901	$(BUILD.po)
902
903.y.po:
904	$(YACC) -d $<
905	$(CPPFORPO) y.tab.c  > $<.i
906	$(BUILD.po)
907	$(RM) y.tab.c
908
909.l.po:
910	$(LEX) $<
911	$(CPPFORPO) lex.yy.c  > $<.i
912	$(BUILD.po)
913	$(RM) lex.yy.c
914
915#
916# Rules to perform stylistic checks
917#
918.SUFFIXES: $(SUFFIXES) .x .xml .check .xmlchk
919
920.h.check:
921	$(DOT_H_CHECK)
922
923.x.check:
924	$(DOT_X_CHECK)
925
926.xml.xmlchk:
927	$(MANIFEST_CHECK)
928
929#
930# Rules to process ONC+ Source partial files
931#
932%_onc_plus:	%
933	@$(ECHO) "extracting code from $< ... "
934	sed -n -e '/ONC_PLUS EXTRACT START/,/ONC_PLUS EXTRACT END/p' $<  > $@
935