xref: /illumos-gate/usr/src/uts/sun4u/sunfire/io/ac_add.c (revision 3d393ee6c37fa10ac512ed6d36109ad616dc7c1a)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #pragma ident	"%Z%%M%	%I%	%E% SMI"
28 
29 #include <sys/types.h>
30 #include <sys/systm.h>
31 #include <sys/ddi.h>
32 #include <sys/sunddi.h>
33 #include <sys/ddi_impldefs.h>
34 #include <sys/obpdefs.h>
35 #include <sys/errno.h>
36 #include <sys/kmem.h>
37 #include <sys/vmem.h>
38 #include <sys/debug.h>
39 #include <sys/sysmacros.h>
40 #include <sys/machsystm.h>
41 #include <sys/machparam.h>
42 #include <sys/modctl.h>
43 #include <sys/fhc.h>
44 #include <sys/ac.h>
45 #include <sys/vm.h>
46 #include <sys/cpu_module.h>
47 #include <vm/seg_kmem.h>
48 #include <vm/hat_sfmmu.h>
49 #include <sys/mem_config.h>
50 #include <sys/mem_cage.h>
51 
52 /*
53  * Default to always clean memory on add to reduce chance
54  * of uncorrectable errors.
55  */
56 int ac_add_clean = 1;
57 
58 #define	ADD_PAGESIZE	MMU_PAGESIZE
59 
60 ac_err_t
61 ac_kpm_err_cvt(int err)
62 {
63 	switch (err) {
64 	case KPHYSM_ESPAN:
65 		return (AC_ERR_KPM_SPAN);
66 	case KPHYSM_EFAULT:
67 		return (AC_ERR_KPM_FAULT);
68 	case KPHYSM_ERESOURCE:
69 		return (AC_ERR_KPM_RESOURCE);
70 	case KPHYSM_ENOTSUP:
71 		return (AC_ERR_KPM_NOTSUP);
72 	case KPHYSM_ENOHANDLES:
73 		return (AC_ERR_KPM_NOHANDLES);
74 	case KPHYSM_ENONRELOC:
75 		return (AC_ERR_KPM_NONRELOC);
76 	case KPHYSM_EHANDLE:
77 		return (AC_ERR_KPM_HANDLE);
78 	case KPHYSM_EBUSY:
79 		return (AC_ERR_KPM_BUSY);
80 	case KPHYSM_ENOTVIABLE:
81 		return (AC_ERR_KPM_NOTVIABLE);
82 	case KPHYSM_ESEQUENCE:
83 		return (AC_ERR_KPM_SEQUENCE);
84 	case KPHYSM_ENOWORK:
85 		return (AC_ERR_KPM_NOWORK);
86 	case KPHYSM_ECANCELLED:
87 		return (AC_ERR_KPM_CANCELLED);
88 	case KPHYSM_ENOTFINISHED:
89 		return (AC_ERR_KPM_NOTFINISHED);
90 	case KPHYSM_ENOTRUNNING:
91 		return (AC_ERR_KPM_NOTRUNNING);
92 	case KPHYSM_EREFUSED:
93 		return (AC_ERR_KPM_REFUSED);
94 	case KPHYSM_EDUP:
95 		return (AC_ERR_KPM_DUP);
96 	default:
97 		return (AC_ERR_DEFAULT);
98 	}
99 }
100 
101 static int
102 ac_add_bank(struct bd_list *add, ac_cfga_pkt_t *pkt)
103 {
104 	uint64_t		decode;
105 	uint64_t		base_pa;
106 	uint64_t		limit_pa;
107 	uint64_t		current_pa;
108 	int			errs;
109 	uint64_t		bank_size;
110 	struct ac_mem_info	*mem_info;
111 	struct ac_soft_state	*asp = pkt->softsp;
112 	uint_t			ilv;
113 
114 	/*
115 	 * Cannot add interleaved banks at the moment.
116 	 */
117 	ilv = (pkt->bank == Bank0) ?
118 	    INTLV0(*asp->ac_memctl) : INTLV1(*asp->ac_memctl);
119 	if (ilv != 1) {
120 		AC_ERR_SET(pkt, AC_ERR_MEM_DEINTLV);
121 		return (EINVAL);
122 	}
123 	/*
124 	 * Determine the physical location of the selected bank
125 	 */
126 	decode = (pkt->bank == Bank0) ?
127 	    *asp->ac_memdecode0 : *asp->ac_memdecode1;
128 	base_pa = GRP_REALBASE(decode);
129 	bank_size = GRP_UK2SPAN(decode);
130 	limit_pa = base_pa + bank_size;
131 
132 	mem_info = &asp->bank[pkt->bank];
133 	if (ac_add_clean || mem_info->condition != SYSC_CFGA_COND_OK) {
134 		caddr_t			base_va;
135 		caddr_t			fill_buf;
136 		int			linesize;
137 
138 		/*
139 		 * We need a page_va and a fill buffer for this operation
140 		 */
141 		base_va = vmem_alloc(heap_arena, PAGESIZE, VM_SLEEP);
142 		fill_buf = kmem_zalloc(ADD_PAGESIZE, KM_SLEEP);
143 		linesize = cpunodes[CPU->cpu_id].ecache_linesize;
144 
145 		/*
146 		 * zero fill the memory -- indirectly initializes the ECC
147 		 */
148 		kpreempt_disable();
149 		for (current_pa = base_pa; current_pa < limit_pa;
150 		    current_pa += ADD_PAGESIZE) {
151 
152 			/* map current pa */
153 			ac_mapin(current_pa, base_va);
154 
155 			/* fill the target page */
156 			ac_blkcopy(fill_buf, base_va,
157 				ADD_PAGESIZE/linesize, linesize);
158 
159 			/* tear down translation */
160 			ac_unmap(base_va);
161 		}
162 		kpreempt_enable();
163 
164 		/*
165 		 * clean up temporary resources
166 		 */
167 		kmem_free(fill_buf, ADD_PAGESIZE);
168 		vmem_free(heap_arena, base_va, PAGESIZE);
169 	}
170 
171 	/*
172 	 * give the memory to Solaris
173 	 */
174 	errs = kphysm_add_memory_dynamic(base_pa >> PAGESHIFT,
175 	    bank_size >> PAGESHIFT);
176 
177 	if (errs != KPHYSM_OK) {
178 		AC_ERR_SET(pkt, ac_kpm_err_cvt(errs));
179 		return (EINVAL);
180 	}
181 
182 	/*
183 	 * Add the board to the cage growth list.
184 	 */
185 	errs = kcage_range_add(btop(base_pa), btop(bank_size), KCAGE_DOWN);
186 	/* TODO: deal with error return. */
187 	if (errs != 0)
188 		cmn_err(CE_NOTE, "ac_add_bank(): board %d, bank %d, "
189 		    "kcage_range_add() returned %d",
190 		    add->sc.board, pkt->bank, errs);
191 
192 	return (0);
193 }
194 
195 int
196 ac_add_memory(ac_cfga_pkt_t *pkt)
197 {
198 	struct bd_list *board;
199 	struct ac_mem_info *mem_info;
200 	int force = pkt->cmd_cfga.force;
201 	int retval;
202 
203 	board = fhc_bdlist_lock(pkt->softsp->board);
204 	if (board == NULL || board->ac_softsp == NULL) {
205 		fhc_bdlist_unlock();
206 		AC_ERR_SET(pkt, AC_ERR_BD);
207 		return (EINVAL);
208 	}
209 	ASSERT(pkt->softsp == board->ac_softsp);
210 
211 	/* verify the board is of the correct type */
212 	switch (board->sc.type) {
213 	case CPU_BOARD:
214 	case MEM_BOARD:
215 		break;
216 	default:
217 		fhc_bdlist_unlock();
218 		AC_ERR_SET(pkt, AC_ERR_BD_TYPE);
219 		return (EINVAL);
220 	}
221 
222 	/* verify the memory condition is acceptable */
223 	mem_info = &pkt->softsp->bank[pkt->bank];
224 	if (!MEM_BOARD_VISIBLE(board) || mem_info->busy ||
225 	    fhc_bd_busy(pkt->softsp->board) ||
226 	    mem_info->rstate != SYSC_CFGA_RSTATE_CONNECTED ||
227 	    mem_info->ostate != SYSC_CFGA_OSTATE_UNCONFIGURED ||
228 	    (!force && mem_info->condition != SYSC_CFGA_COND_OK)) {
229 		fhc_bdlist_unlock();
230 		AC_ERR_SET(pkt, AC_ERR_BD_STATE);
231 		return (EINVAL);
232 	}
233 
234 	/*
235 	 * at this point, we have an available bank to add.
236 	 * mark it busy and initiate the add function.
237 	 */
238 	mem_info->busy = TRUE;
239 	fhc_bdlist_unlock();
240 
241 	retval = ac_add_bank(board, pkt);
242 
243 	/*
244 	 * We made it!  Update the status and get out of here.
245 	 */
246 	(void) fhc_bdlist_lock(-1);
247 	mem_info->busy = FALSE;
248 	if (retval == 0) {
249 		mem_info->ostate = SYSC_CFGA_OSTATE_CONFIGURED;
250 		mem_info->status_change = ddi_get_time();
251 	}
252 
253 	fhc_bdlist_unlock();
254 
255 	if (retval != 0) {
256 		return (retval);
257 	}
258 	return (DDI_SUCCESS);
259 }
260