xref: /illumos-gate/usr/src/uts/sun4u/os/fillsysinfo.c (revision 598f4ceed9327d2d6c2325dd67cae3aa06f7fea6)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #include <sys/errno.h>
27 #include <sys/types.h>
28 #include <sys/param.h>
29 #include <sys/cpu.h>
30 #include <sys/cpuvar.h>
31 #include <sys/clock.h>
32 
33 #include <sys/promif.h>
34 #include <sys/promimpl.h>
35 #include <sys/systm.h>
36 #include <sys/machsystm.h>
37 #include <sys/debug.h>
38 #include <sys/sunddi.h>
39 #include <sys/modctl.h>
40 #include <sys/spitregs.h>
41 #include <sys/cheetahregs.h>
42 #include <sys/cpu_module.h>
43 #include <sys/kobj.h>
44 #include <sys/cmp.h>
45 #include <sys/async.h>
46 #include <vm/page.h>
47 
48 /*
49  * The OpenBoot Standalone Interface supplies the kernel with
50  * implementation dependent parameters through the devinfo/property mechanism
51  */
52 typedef enum { XDRBOOL, XDRINT, XDRSTRING } xdrs;
53 
54 /*
55  * structure describing properties that we are interested in querying the
56  * OBP for.
57  */
58 struct getprop_info {
59 	char	*name;
60 	xdrs	type;
61 	uint_t	*var;
62 };
63 
64 /*
65  * structure used to convert between a string returned by the OBP & a type
66  * used within the kernel. We prefer to paramaterize rather than type.
67  */
68 struct convert_info {
69 	char	*name;
70 	uint_t	var;
71 	char	*realname;
72 };
73 
74 /*
75  * structure describing nodes that we are interested in querying the OBP for
76  * properties.
77  */
78 struct node_info {
79 	char			*name;
80 	int			size;
81 	struct getprop_info	*prop;
82 	struct getprop_info	*prop_end;
83 	unsigned int		*value;
84 };
85 
86 /*
87  * macro definitions for routines that form the OBP interface
88  */
89 #define	NEXT			prom_nextnode
90 #define	CHILD			prom_childnode
91 #define	GETPROP			prom_getprop
92 #define	GETPROPLEN		prom_getproplen
93 
94 
95 /* 0=quiet; 1=verbose; 2=debug */
96 int	debug_fillsysinfo = 0;
97 #define	VPRINTF if (debug_fillsysinfo) prom_printf
98 
99 int ncpunode;
100 struct cpu_node cpunodes[NCPU];
101 
102 static void	check_cpus_ver(void);
103 static void	check_cpus_set(void);
104 static void fill_address(pnode_t, char *);
105 void	fill_cpu(pnode_t);
106 void	fill_cpu_ddi(dev_info_t *);
107 void	empty_cpu(int);
108 void	plat_fill_mc(pnode_t);
109 #pragma weak plat_fill_mc
110 
111 uint64_t	system_clock_freq;
112 
113 /*
114  * list of well known devices that must be mapped, and the variables that
115  * contain their addresses.
116  */
117 caddr_t		v_auxio_addr = NULL;
118 caddr_t		v_eeprom_addr = NULL;
119 caddr_t		v_timecheck_addr = NULL;
120 caddr_t 	v_rtc_addr_reg = NULL;
121 volatile unsigned char	*v_rtc_data_reg = NULL;
122 volatile uint8_t	*v_pmc_addr_reg = NULL;
123 volatile uint8_t	*v_pmc_data_reg = NULL;
124 
125 int		niobus = 0;
126 uint_t		niommu_tsbs = 0;
127 
128 /*
129  * Hardware watchdog support.
130  */
131 #define	CHOSEN_EEPROM	"eeprom"
132 #define	WATCHDOG_ENABLE "watchdog-enable"
133 static pnode_t 		chosen_eeprom;
134 
135 /*
136  * Appropriate tod module will be dynamically selected while booting
137  * based on finding a device tree node with a "device_type" property value
138  * of "tod". If such a node describing tod is not found, for backward
139  * compatibility, a node with a "name" property value of "eeprom" and
140  * "model" property value of "mk48t59" will be used. Failing to find a
141  * node matching either of the above criteria will result in no tod module
142  * being selected; this will cause the boot process to halt.
143  */
144 char	*tod_module_name;
145 
146 /*
147  * If this variable is non-zero, cpr should return "not supported" when
148  * it is queried even though it would normally be supported on this platform.
149  */
150 int cpr_supported_override;
151 
152 /*
153  * Some platforms may need to support CPR even in the absence of the
154  * energystar-v* property (Enchilada server, for example).  If this
155  * variable is non-zero, cpr should proceed even in the absence
156  * of the energystar-v* property.
157  */
158 int cpr_platform_enable = 0;
159 
160 /*
161  * Some nodes have functions that need to be called when they're seen.
162  */
163 static void	have_sbus(pnode_t);
164 static void	have_pci(pnode_t);
165 static void	have_eeprom(pnode_t);
166 static void	have_auxio(pnode_t);
167 static void	have_rtc(pnode_t);
168 static void	have_tod(pnode_t);
169 static void	have_pmc(pnode_t);
170 
171 static struct wkdevice {
172 	char *wk_namep;
173 	void (*wk_func)(pnode_t);
174 	caddr_t *wk_vaddrp;
175 	ushort_t wk_flags;
176 #define	V_OPTIONAL	0x0000
177 #define	V_MUSTHAVE	0x0001
178 #define	V_MAPPED	0x0002
179 #define	V_MULTI		0x0003	/* optional, may be more than one */
180 } wkdevice[] = {
181 	{ "sbus", have_sbus, NULL, V_MULTI },
182 	{ "pci", have_pci, NULL, V_MULTI },
183 	{ "eeprom", have_eeprom, NULL, V_MULTI },
184 	{ "auxio", have_auxio, NULL, V_OPTIONAL },
185 	{ "rtc", have_rtc, NULL, V_OPTIONAL },
186 	{ "pmc", have_pmc, NULL, V_OPTIONAL },
187 	{ 0, },
188 };
189 
190 static void map_wellknown(pnode_t);
191 
192 void
193 map_wellknown_devices()
194 {
195 	struct wkdevice *wkp;
196 	phandle_t	ieeprom;
197 	pnode_t	root;
198 	uint_t	stick_freq;
199 
200 	/*
201 	 * if there is a chosen eeprom, note it (for have_eeprom())
202 	 */
203 	if (GETPROPLEN(prom_chosennode(), CHOSEN_EEPROM) ==
204 	    sizeof (phandle_t) &&
205 	    GETPROP(prom_chosennode(), CHOSEN_EEPROM, (caddr_t)&ieeprom) != -1)
206 		chosen_eeprom = (pnode_t)prom_decode_int(ieeprom);
207 
208 	root = prom_nextnode((pnode_t)0);
209 	/*
210 	 * Get System clock frequency from root node if it exists.
211 	 */
212 	if (GETPROP(root, "stick-frequency", (caddr_t)&stick_freq) != -1)
213 		system_clock_freq = stick_freq;
214 
215 	map_wellknown(NEXT((pnode_t)0));
216 
217 	/*
218 	 * See if it worked
219 	 */
220 	for (wkp = wkdevice; wkp->wk_namep; ++wkp) {
221 		if (wkp->wk_flags == V_MUSTHAVE) {
222 			cmn_err(CE_PANIC, "map_wellknown_devices: required "
223 			    "device %s not mapped", wkp->wk_namep);
224 		}
225 	}
226 
227 	/*
228 	 * all sun4u systems must have an IO bus, i.e. sbus or pcibus
229 	 */
230 	if (niobus == 0)
231 		cmn_err(CE_PANIC, "map_wellknown_devices: no i/o bus node");
232 
233 	check_cpus_ver();
234 	check_cpus_set();
235 }
236 
237 /*
238  * map_wellknown - map known devices & registers
239  */
240 static void
241 map_wellknown(pnode_t curnode)
242 {
243 	extern int status_okay(int, char *, int);
244 	char tmp_name[MAXSYSNAME];
245 	int sok;
246 
247 #ifdef VPRINTF
248 	VPRINTF("map_wellknown(%x)\n", curnode);
249 #endif /* VPRINTF */
250 
251 	for (curnode = CHILD(curnode); curnode; curnode = NEXT(curnode)) {
252 		/*
253 		 * prune subtree if status property indicating not okay
254 		 */
255 		sok = status_okay((int)curnode, (char *)NULL, 0);
256 		if (!sok) {
257 			char devtype_buf[OBP_MAXPROPNAME];
258 			int size;
259 
260 #ifdef VPRINTF
261 			VPRINTF("map_wellknown: !okay status property\n");
262 #endif /* VPRINTF */
263 			/*
264 			 * a status property indicating bad memory will be
265 			 * associated with a node which has a "device_type"
266 			 * property with a value of "memory-controller"
267 			 */
268 			if ((size = GETPROPLEN(curnode,
269 			    OBP_DEVICETYPE)) == -1)
270 				continue;
271 			if (size > OBP_MAXPROPNAME) {
272 				cmn_err(CE_CONT, "node %x '%s' prop too "
273 				    "big\n", curnode, OBP_DEVICETYPE);
274 				continue;
275 			}
276 			if (GETPROP(curnode, OBP_DEVICETYPE,
277 			    devtype_buf) == -1) {
278 				cmn_err(CE_CONT, "node %x '%s' get failed\n",
279 				    curnode, OBP_DEVICETYPE);
280 				continue;
281 			}
282 			if (strcmp(devtype_buf, "memory-controller") != 0)
283 				continue;
284 			/*
285 			 * ...else fall thru and process the node...
286 			 */
287 		}
288 		bzero(tmp_name, MAXSYSNAME);
289 		if (GETPROP(curnode, OBP_NAME, (caddr_t)tmp_name) != -1)
290 			fill_address(curnode, tmp_name);
291 		if (GETPROP(curnode, OBP_DEVICETYPE, tmp_name) != -1 &&
292 		    strcmp(tmp_name, "cpu") == 0) {
293 			fill_cpu(curnode);
294 		}
295 		if (strcmp(tmp_name, "tod") == 0)
296 			have_tod(curnode);
297 		if (sok && (strcmp(tmp_name, "memory-controller") == 0) &&
298 		    (&plat_fill_mc != NULL))
299 			plat_fill_mc(curnode);
300 		map_wellknown(curnode);
301 	}
302 }
303 
304 static void
305 fill_address(pnode_t curnode, char *namep)
306 {
307 	struct wkdevice *wkp;
308 	int size;
309 	uint32_t vaddr;
310 
311 	for (wkp = wkdevice; wkp->wk_namep; ++wkp) {
312 		if (strcmp(wkp->wk_namep, namep) != 0)
313 			continue;
314 		if (wkp->wk_flags == V_MAPPED)
315 			return;
316 		if (wkp->wk_vaddrp != NULL) {
317 			if ((size = GETPROPLEN(curnode, OBP_ADDRESS)) == -1) {
318 				cmn_err(CE_CONT, "device %s size %d\n",
319 				    namep, size);
320 				continue;
321 			}
322 			if (size != sizeof (vaddr)) {
323 				cmn_err(CE_CONT, "device %s address prop too "
324 				    "big\n", namep);
325 				continue;
326 			}
327 			if (GETPROP(curnode, OBP_ADDRESS,
328 			    (caddr_t)&vaddr) == -1) {
329 				cmn_err(CE_CONT, "device %s not mapped\n",
330 				    namep);
331 				continue;
332 			}
333 
334 			/* make into a native pointer */
335 			*wkp->wk_vaddrp = (caddr_t)(uintptr_t)vaddr;
336 #ifdef VPRINTF
337 			VPRINTF("fill_address: %s mapped to %p\n", namep,
338 			    (void *)*wkp->wk_vaddrp);
339 #endif /* VPRINTF */
340 		}
341 		if (wkp->wk_func != NULL)
342 			(*wkp->wk_func)(curnode);
343 		/*
344 		 * If this one is optional and there may be more than
345 		 * one, don't set V_MAPPED, which would cause us to skip it
346 		 * next time around
347 		 */
348 		if (wkp->wk_flags != V_MULTI)
349 			wkp->wk_flags = V_MAPPED;
350 	}
351 }
352 
353 int
354 get_portid(pnode_t node, pnode_t *cmpp)
355 {
356 	int portid;
357 	int i;
358 	char dev_type[OBP_MAXPROPNAME];
359 	pnode_t cpu_parent;
360 
361 	if (cmpp != NULL)
362 		*cmpp = OBP_NONODE;
363 
364 	if (GETPROP(node, "portid", (caddr_t)&portid) != -1)
365 		return (portid);
366 	if (GETPROP(node, "upa-portid", (caddr_t)&portid) != -1)
367 		return (portid);
368 	if (GETPROP(node, "device_type", (caddr_t)&dev_type) == -1)
369 		return (-1);
370 
371 	/*
372 	 * For a virtual cpu node that is a CMP core, the "portid"
373 	 * is in the parent node.
374 	 * For a virtual cpu node that is a CMT strand, the "portid" is
375 	 * in its grandparent node.
376 	 * So we iterate up as far as 2 levels to get the "portid".
377 	 */
378 	if (strcmp(dev_type, "cpu") == 0) {
379 		cpu_parent = node = prom_parentnode(node);
380 		for (i = 0; i < 2; i++) {
381 			if (node == OBP_NONODE || node == OBP_BADNODE)
382 				break;
383 			if (GETPROP(node, "portid", (caddr_t)&portid) != -1) {
384 				if (cmpp != NULL)
385 					*cmpp = cpu_parent;
386 				return (portid);
387 			}
388 			node = prom_parentnode(node);
389 		}
390 	}
391 
392 	return (-1);
393 }
394 
395 /*
396  * Adjust page coloring variables based on the physical ecache setsize of
397  * the configured cpus:
398  *
399  * Set ecache_setsize to max ecache set size to be used by
400  * page_coloring_init() to determine the page colors to configure.
401  * The adjustment is unlikely to be necessary... For cheetah+ systems,
402  * ecache_setsize should already be set in cpu_fiximp() to the maximum
403  * possible ecache setsize of any supported cheetah+ cpus. The adjustment
404  * is for the off chance that a non-cheetah+ system may have heterogenous
405  * cpus.
406  *
407  * Set cpu_setsize to the actual cpu setsize if the setsize is homogenous
408  * across all cpus otherwise set it to -1 if heterogenous.
409  *
410  * Set cpu_page_colors to -1 to signify heterogeneity of ecache setsizes
411  * to the page_get routines.
412  */
413 static void
414 adj_ecache_setsize(int ecsetsize)
415 {
416 	if (ecsetsize > ecache_setsize)
417 		ecache_setsize = ecsetsize;
418 
419 	switch (cpu_setsize) {
420 	case -1:
421 		break;
422 	case 0:
423 		cpu_setsize = ecsetsize;
424 		break;
425 	default:
426 		/* set to -1 if hetergenous cpus */
427 		if (cpu_setsize != ecsetsize) {
428 			if (do_pg_coloring)
429 				cpu_page_colors = -1;
430 			/*
431 			 * if page coloring disabled, cpu_page_colors should
432 			 * remain 0 to prevent page coloring processing.
433 			 */
434 			cpu_setsize = -1;
435 		}
436 		break;
437 	}
438 }
439 
440 void
441 fill_cpu(pnode_t node)
442 {
443 	extern int cpu_get_cpu_unum(int, char *, int, int *);
444 	struct cpu_node *cpunode;
445 	processorid_t cpuid;
446 	int portid;
447 	int tlbsize;
448 	int size;
449 	uint_t clk_freq;
450 	pnode_t cmpnode;
451 	char namebuf[OBP_MAXPROPNAME], unum[UNUM_NAMLEN];
452 	char *namebufp;
453 	int proplen;
454 
455 	if ((portid = get_portid(node, &cmpnode)) == -1) {
456 		cmn_err(CE_PANIC, "portid not found");
457 	}
458 
459 	if (GETPROP(node, "cpuid", (caddr_t)&cpuid) == -1) {
460 		cpuid = portid;
461 	}
462 
463 	if (cpuid < 0 || cpuid >= NCPU) {
464 		cmn_err(CE_PANIC, "cpu node %x: cpuid %d out of range", node,
465 		    cpuid);
466 		return;
467 	}
468 
469 	cpunode = &cpunodes[cpuid];
470 	cpunode->portid = portid;
471 	cpunode->nodeid = node;
472 
473 	if (cpu_get_cpu_unum(cpuid, unum, UNUM_NAMLEN, &size) != 0) {
474 		cpunode->fru_fmri[0] = '\0';
475 	} else {
476 		(void) snprintf(cpunode->fru_fmri, sizeof (cpunode->fru_fmri),
477 		    "%s%s", CPU_FRU_FMRI, unum);
478 	}
479 
480 	if (cmpnode) {
481 		/*
482 		 * For the CMT case, the parent "core" node contains
483 		 * properties needed below, use it instead of the
484 		 * cpu node.
485 		 */
486 		if ((GETPROP(cmpnode, "device_type", namebuf) > 0) &&
487 		    (strcmp(namebuf, "core") == 0)) {
488 			node = cmpnode;
489 		}
490 	}
491 
492 	(void) GETPROP(node, (cmpnode ? "compatible" : "name"), namebuf);
493 
494 	/* Make sure CPU name is within boundary and NULL terminated */
495 	proplen = GETPROPLEN(node, (cmpnode ? "compatible" : "name"));
496 	ASSERT(proplen > 0 && proplen <= OBP_MAXPROPNAME);
497 
498 	if (proplen >= OBP_MAXPROPNAME)
499 		proplen = OBP_MAXPROPNAME - 1;
500 
501 	namebuf[proplen] = '\0';
502 
503 	namebufp = namebuf;
504 	if (strncmp(namebufp, "SUNW,", 5) == 0)
505 		namebufp += 5;
506 	else if (strncmp(namebufp, "FJSV,", 5) == 0)
507 		namebufp += 5;
508 	(void) strcpy(cpunode->name, namebufp);
509 
510 	(void) GETPROP(node, "implementation#",
511 	    (caddr_t)&cpunode->implementation);
512 	(void) GETPROP(node, "mask#", (caddr_t)&cpunode->version);
513 
514 	if (IS_CHEETAH(cpunode->implementation)) {
515 		/* remap mask reg */
516 		cpunode->version = REMAP_CHEETAH_MASK(cpunode->version);
517 	}
518 	if (GETPROP(node, "clock-frequency", (caddr_t)&clk_freq) == -1) {
519 		/*
520 		 * If we didn't find it in the CPU node, look in the root node.
521 		 */
522 		pnode_t root = prom_nextnode((pnode_t)0);
523 		if (GETPROP(root, "clock-frequency", (caddr_t)&clk_freq) == -1)
524 			clk_freq = 0;
525 	}
526 	cpunode->clock_freq = clk_freq;
527 
528 	ASSERT(cpunode->clock_freq != 0);
529 	/*
530 	 * Compute scaling factor based on rate of %tick. This is used
531 	 * to convert from ticks derived from %tick to nanoseconds. See
532 	 * comment in sun4u/sys/clock.h for details.
533 	 */
534 	cpunode->tick_nsec_scale = (uint_t)(((uint64_t)NANOSEC <<
535 	    (32 - TICK_NSEC_SHIFT)) / cpunode->clock_freq);
536 
537 	(void) GETPROP(node, "#itlb-entries", (caddr_t)&tlbsize);
538 	ASSERT(tlbsize < USHRT_MAX); /* since we cast it */
539 	cpunode->itlb_size = (ushort_t)tlbsize;
540 
541 	(void) GETPROP(node, "#dtlb-entries", (caddr_t)&tlbsize);
542 	ASSERT(tlbsize < USHRT_MAX); /* since we cast it */
543 	cpunode->dtlb_size = (ushort_t)tlbsize;
544 
545 	if (cmpnode != OBP_NONODE) {
546 		/*
547 		 * If the CPU has a level 3 cache, then it will be the
548 		 * external cache. Otherwise the level 2 cache is the
549 		 * external cache.
550 		 */
551 		size = 0;
552 		(void) GETPROP(node, "l3-cache-size", (caddr_t)&size);
553 		if (size <= 0)
554 			(void) GETPROP(node, "l2-cache-size", (caddr_t)&size);
555 		ASSERT(size != 0);
556 		cpunode->ecache_size = size;
557 
558 		size = 0;
559 		(void) GETPROP(node, "l3-cache-line-size", (caddr_t)&size);
560 		if (size <= 0)
561 			(void) GETPROP(node, "l2-cache-line-size",
562 			    (caddr_t)&size);
563 		ASSERT(size != 0);
564 		cpunode->ecache_linesize = size;
565 
566 		size = 0;
567 		(void) GETPROP(node, "l2-cache-associativity", (caddr_t)&size);
568 		ASSERT(size != 0);
569 		cpunode->ecache_associativity = size;
570 
571 		cmp_add_cpu(portid, cpuid);
572 	} else {
573 		size = 0;
574 		(void) GETPROP(node, "ecache-size", (caddr_t)&size);
575 		ASSERT(size != 0);
576 		cpunode->ecache_size = size;
577 
578 		size = 0;
579 		(void) GETPROP(node, "ecache-line-size", (caddr_t)&size);
580 		ASSERT(size != 0);
581 		cpunode->ecache_linesize = size;
582 
583 		size = 0;
584 		(void) GETPROP(node, "ecache-associativity", (caddr_t)&size);
585 		ASSERT(size != 0);
586 		cpunode->ecache_associativity = size;
587 	}
588 
589 	/* by default set msram to non-mirrored one */
590 	cpunode->msram = ECACHE_CPU_NON_MIRROR;
591 
592 	if (GETPROPLEN(node, "msram") != -1) {
593 		cpunode->msram = ECACHE_CPU_MIRROR;
594 	}
595 
596 	if (GETPROPLEN(node, "msram-observed") != -1) {
597 		cpunode->msram = ECACHE_CPU_MIRROR;
598 	}
599 
600 	if (ncpunode == 0) {
601 		cpu_fiximp(node);
602 	}
603 
604 	cpunode->ecache_setsize =
605 	    cpunode->ecache_size / cpunode->ecache_associativity;
606 
607 	adj_ecache_setsize(cpunode->ecache_setsize);
608 
609 	ncpunode++;
610 }
611 
612 int
613 get_portid_ddi(dev_info_t *dip, dev_info_t **cmpp)
614 {
615 	int portid;
616 	int i;
617 	char dev_type[OBP_MAXPROPNAME];
618 	int len = OBP_MAXPROPNAME;
619 	dev_info_t *cpu_parent;
620 
621 	if (cmpp != NULL)
622 		*cmpp = NULL;
623 
624 	if ((portid = ddi_prop_get_int(DDI_DEV_T_ANY, dip,
625 	    DDI_PROP_DONTPASS, "portid", -1)) != -1)
626 		return (portid);
627 	if ((portid = ddi_prop_get_int(DDI_DEV_T_ANY, dip,
628 	    DDI_PROP_DONTPASS, "upa-portid", -1)) != -1)
629 		return (portid);
630 	if (ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN_AND_VAL_BUF,
631 	    DDI_PROP_DONTPASS, "device_type", (caddr_t)dev_type,
632 	    &len) != 0)
633 		return (-1);
634 
635 	/*
636 	 * For a virtual cpu node that is a CMP core, the "portid"
637 	 * is in the parent node.
638 	 * For a virtual cpu node that is a CMT strand, the "portid" is
639 	 * in its grandparent node.
640 	 * So we iterate up as far as 2 levels to get the "portid".
641 	 */
642 	if (strcmp(dev_type, "cpu") == 0) {
643 		cpu_parent = dip = ddi_get_parent(dip);
644 		for (i = 0; dip != NULL && i < 2; i++) {
645 			if ((portid = ddi_prop_get_int(DDI_DEV_T_ANY, dip,
646 			    DDI_PROP_DONTPASS, "portid", -1)) != -1) {
647 				if (cmpp != NULL)
648 					*cmpp = cpu_parent;
649 				return (portid);
650 			}
651 			dip = ddi_get_parent(dip);
652 		}
653 	}
654 
655 	return (-1);
656 }
657 
658 /*
659  * A hotplug version of fill_cpu().  (Doesn't assume that there's a node
660  * in the PROM device tree for this CPU.)  We still need the PROM version
661  * since it is called very early in the boot cycle before (before
662  * setup_ddi()).  Sigh...someday this will all be cleaned up.
663  */
664 void
665 fill_cpu_ddi(dev_info_t *dip)
666 {
667 	extern int cpu_get_cpu_unum(int, char *, int, int *);
668 	struct cpu_node *cpunode;
669 	processorid_t cpuid;
670 	int portid;
671 	int len = OBP_MAXPROPNAME;
672 	int tlbsize;
673 	dev_info_t *cmpnode;
674 	char namebuf[OBP_MAXPROPNAME], unum[UNUM_NAMLEN];
675 	char *namebufp;
676 	char dev_type[OBP_MAXPROPNAME];
677 
678 	if ((portid = get_portid_ddi(dip, &cmpnode)) == -1) {
679 		cmn_err(CE_PANIC, "portid not found");
680 	}
681 
682 	if ((cpuid = ddi_prop_get_int(DDI_DEV_T_ANY, dip,
683 	    DDI_PROP_DONTPASS, "cpuid", -1)) == -1) {
684 		cpuid = portid;
685 	}
686 
687 	if (cpuid < 0 || cpuid >= NCPU) {
688 		cmn_err(CE_PANIC, "cpu dip %p: cpuid %d out of range",
689 		    (void *)dip, cpuid);
690 		return;
691 	}
692 
693 	cpunode = &cpunodes[cpuid];
694 	cpunode->portid = portid;
695 	cpunode->nodeid = ddi_get_nodeid(dip);
696 
697 	if (cmpnode != NULL) {
698 		/*
699 		 * For the CMT case, the parent "core" node contains
700 		 * properties needed below, use it instead of the
701 		 * cpu node.
702 		 */
703 		if ((ddi_prop_op(DDI_DEV_T_ANY, cmpnode, PROP_LEN_AND_VAL_BUF,
704 		    DDI_PROP_DONTPASS, "device_type",
705 		    (caddr_t)dev_type, &len) == DDI_PROP_SUCCESS) &&
706 		    (strcmp(dev_type, "core") == 0))
707 			dip = cmpnode;
708 	}
709 
710 	if (cpu_get_cpu_unum(cpuid, unum, UNUM_NAMLEN, &len) != 0) {
711 		cpunode->fru_fmri[0] = '\0';
712 	} else {
713 		(void) snprintf(cpunode->fru_fmri, sizeof (cpunode->fru_fmri),
714 		    "%s%s", CPU_FRU_FMRI, unum);
715 	}
716 
717 	len = sizeof (namebuf);
718 	(void) ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN_AND_VAL_BUF,
719 	    DDI_PROP_DONTPASS, (cmpnode ? "compatible" : "name"),
720 	    (caddr_t)namebuf, &len);
721 
722 	namebufp = namebuf;
723 	if (strncmp(namebufp, "SUNW,", 5) == 0)
724 		namebufp += 5;
725 	else if (strncmp(namebufp, "FJSV,", 5) == 0)
726 		namebufp += 5;
727 	(void) strcpy(cpunode->name, namebufp);
728 
729 	cpunode->implementation = ddi_prop_get_int(DDI_DEV_T_ANY, dip,
730 	    DDI_PROP_DONTPASS, "implementation#", 0);
731 
732 	cpunode->version = ddi_prop_get_int(DDI_DEV_T_ANY, dip,
733 	    DDI_PROP_DONTPASS, "mask#", 0);
734 
735 	if (IS_CHEETAH(cpunode->implementation)) {
736 		/* remap mask reg */
737 		cpunode->version = REMAP_CHEETAH_MASK(cpunode->version);
738 	}
739 
740 	cpunode->clock_freq = (uint32_t)ddi_prop_get_int(DDI_DEV_T_ANY, dip,
741 	    DDI_PROP_DONTPASS, "clock-frequency", 0);
742 
743 	ASSERT(cpunode->clock_freq != 0);
744 	/*
745 	 * Compute scaling factor based on rate of %tick. This is used
746 	 * to convert from ticks derived from %tick to nanoseconds. See
747 	 * comment in sun4u/sys/clock.h for details.
748 	 */
749 	cpunode->tick_nsec_scale = (uint_t)(((uint64_t)NANOSEC <<
750 	    (32 - TICK_NSEC_SHIFT)) / cpunode->clock_freq);
751 
752 	tlbsize = ddi_prop_get_int(DDI_DEV_T_ANY, dip,
753 	    DDI_PROP_DONTPASS, "#itlb-entries", 0);
754 	ASSERT(tlbsize < USHRT_MAX); /* since we cast it */
755 	cpunode->itlb_size = (ushort_t)tlbsize;
756 
757 	tlbsize = ddi_prop_get_int(DDI_DEV_T_ANY, dip,
758 	    DDI_PROP_DONTPASS, "#dtlb-entries", 0);
759 	ASSERT(tlbsize < USHRT_MAX); /* since we cast it */
760 	cpunode->dtlb_size = (ushort_t)tlbsize;
761 
762 	if (cmpnode != NULL) {
763 		/*
764 		 * If the CPU has a level 3 cache, then that is it's
765 		 * external cache. Otherwise the external cache must
766 		 * be the level 2 cache.
767 		 */
768 		cpunode->ecache_size = ddi_prop_get_int(DDI_DEV_T_ANY,
769 		    dip, DDI_PROP_DONTPASS, "l3-cache-size", 0);
770 		if (cpunode->ecache_size == 0)
771 			cpunode->ecache_size = ddi_prop_get_int(DDI_DEV_T_ANY,
772 			    dip, DDI_PROP_DONTPASS, "l2-cache-size", 0);
773 		ASSERT(cpunode->ecache_size != 0);
774 
775 		cpunode->ecache_linesize = ddi_prop_get_int(DDI_DEV_T_ANY,
776 		    dip, DDI_PROP_DONTPASS, "l3-cache-line-size", 0);
777 		if (cpunode->ecache_linesize == 0)
778 			cpunode->ecache_linesize =
779 			    ddi_prop_get_int(DDI_DEV_T_ANY, dip,
780 			    DDI_PROP_DONTPASS, "l2-cache-line-size", 0);
781 		ASSERT(cpunode->ecache_linesize != 0);
782 
783 		cpunode->ecache_associativity = ddi_prop_get_int(DDI_DEV_T_ANY,
784 		    dip, DDI_PROP_DONTPASS, "l2-cache-associativity", 0);
785 		ASSERT(cpunode->ecache_associativity != 0);
786 
787 		cmp_add_cpu(portid, cpuid);
788 	} else {
789 		cpunode->ecache_size = ddi_prop_get_int(DDI_DEV_T_ANY,
790 		    dip, DDI_PROP_DONTPASS, "ecache-size", 0);
791 		ASSERT(cpunode->ecache_size != 0);
792 
793 		cpunode->ecache_linesize = ddi_prop_get_int(DDI_DEV_T_ANY,
794 		    dip, DDI_PROP_DONTPASS, "ecache-line-size", 0);
795 		ASSERT(cpunode->ecache_linesize != 0);
796 
797 		cpunode->ecache_associativity = ddi_prop_get_int(DDI_DEV_T_ANY,
798 		    dip, DDI_PROP_DONTPASS, "ecache-associativity", 0);
799 		ASSERT(cpunode->ecache_associativity != 0);
800 	}
801 
802 	/* by default set msram to non-mirrored one */
803 	cpunode->msram = ECACHE_CPU_NON_MIRROR;
804 
805 	if (ddi_prop_exists(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "msram")) {
806 		cpunode->msram = ECACHE_CPU_MIRROR;
807 	} else if (ddi_prop_exists(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
808 	    "msram-observed")) {
809 		cpunode->msram = ECACHE_CPU_MIRROR;
810 	}
811 
812 	ASSERT(ncpunode > 0);	/* fiximp not req'd */
813 
814 	cpunode->ecache_setsize =
815 	    cpunode->ecache_size / cpunode->ecache_associativity;
816 
817 	adj_ecache_setsize(cpunode->ecache_setsize);
818 
819 	ncpunode++;
820 }
821 
822 void
823 empty_cpu(int cpuid)
824 {
825 	bzero(&cpunodes[cpuid], sizeof (struct cpu_node));
826 	ncpunode--;
827 }
828 
829 #ifdef SF_ERRATA_30 /* call causes fp-disabled */
830 int spitfire_call_bug = 0;
831 #endif
832 #ifdef SF_V9_TABLE_28	/* fp over/underflow traps may cause wrong fsr.cexc */
833 int spitfire_bb_fsr_bug = 0;
834 #endif
835 
836 #ifdef JALAPENO_ERRATA_85
837 /*
838  * Set the values here assuming we're running 2.4 or later Jalapenos.  If
839  * not, they'll be reset below.  Either way, the default can be overridden
840  * when we read /etc/system later in boot.
841  */
842 int jp_errata_85_allow_slow_scrub = 1;
843 int jp_errata_85_enable = 0;
844 #endif	/* JALAPENO_ERRATA_85 */
845 
846 static void
847 check_cpus_ver(void)
848 {
849 	int i;
850 	int impl, cpuid = getprocessorid();
851 	int min_supported_rev;
852 
853 	ASSERT(cpunodes[cpuid].nodeid != 0);
854 
855 	impl = cpunodes[cpuid].implementation;
856 	switch (impl) {
857 	default:
858 		min_supported_rev = 0;
859 		break;
860 	case SPITFIRE_IMPL:
861 		min_supported_rev = SPITFIRE_MINREV_SUPPORTED;
862 		break;
863 	case CHEETAH_IMPL:
864 		min_supported_rev = CHEETAH_MINREV_SUPPORTED;
865 		break;
866 	}
867 
868 	for (i = 0; i < NCPU; i++) {
869 		if (cpunodes[i].nodeid == 0)
870 			continue;
871 
872 		if (IS_SPITFIRE(impl)) {
873 			if (cpunodes[i].version < min_supported_rev) {
874 				cmn_err(CE_PANIC, "UltraSPARC versions older "
875 				    "than %d.%d are no longer supported "
876 				    "(cpu #%d)",
877 				    SPITFIRE_MAJOR_VERSION(min_supported_rev),
878 				    SPITFIRE_MINOR_VERSION(min_supported_rev),
879 				    i);
880 			}
881 
882 			/*
883 			 * Min supported rev is 2.1 but we've seen problems
884 			 * with that so we still want to warn if we see one.
885 			 */
886 			if (cpunodes[i].version < 0x22) {
887 				cmn_err(CE_WARN,
888 				"UltraSPARC versions older than "
889 				"2.2 are not supported (cpu #%d)", i);
890 #ifdef SF_ERRATA_30 /* call causes fp-disabled */
891 				spitfire_call_bug = 1;
892 #endif /* SF_ERRATA_30 */
893 			}
894 		}
895 
896 
897 #ifdef SF_V9_TABLE_28	/* fp over/underflow traps may cause wrong fsr.cexc */
898 		if (IS_SPITFIRE(impl) || IS_BLACKBIRD(impl))
899 			spitfire_bb_fsr_bug = 1;
900 #endif /* SF_V9_TABLE_28 */
901 
902 		if (IS_CHEETAH(impl)) {
903 			if (cpunodes[i].version < min_supported_rev) {
904 				cmn_err(CE_PANIC, "UltraSPARC-III versions "
905 				    "older than %d.%d are no longer supported "
906 				    "(cpu #%d)",
907 				    CHEETAH_MAJOR_VERSION(min_supported_rev),
908 				    CHEETAH_MINOR_VERSION(min_supported_rev),
909 				    i);
910 			}
911 
912 		}
913 
914 #ifdef JALAPENO_ERRATA_85
915 		if (IS_JALAPENO(impl) && (cpunodes[i].version < 0x24)) {
916 			jp_errata_85_allow_slow_scrub = 0;
917 			jp_errata_85_enable = 1;
918 		}
919 #endif /* JALAPENO_ERRATA_85 */
920 	}
921 }
922 
923 /*
924  * Check for a legal set of CPUs.
925  */
926 static void
927 check_cpus_set(void)
928 {
929 	int i;
930 	int impl;
931 	int npanther = 0;
932 	int njupiter = 0;
933 
934 	impl = cpunodes[getprocessorid()].implementation;
935 
936 	switch (impl) {
937 	case CHEETAH_PLUS_IMPL:
938 	case JAGUAR_IMPL:
939 	case PANTHER_IMPL:
940 		/*
941 		 * Check for a legal heterogeneous set of CPUs.
942 		 */
943 		for (i = 0; i < NCPU; i++) {
944 			if (cpunodes[i].nodeid == 0)
945 				continue;
946 
947 			if (IS_PANTHER(cpunodes[i].implementation)) {
948 				npanther += 1;
949 			}
950 
951 			if (!(IS_CHEETAH_PLUS(cpunodes[i].implementation) ||
952 			    IS_JAGUAR(cpunodes[i].implementation) ||
953 			    IS_PANTHER(cpunodes[i].implementation))) {
954 				use_mp = 0;
955 				break;
956 			}
957 		}
958 		break;
959 	case OLYMPUS_C_IMPL:
960 	case JUPITER_IMPL:
961 		/*
962 		 * Check for a legal heterogeneous set of CPUs on the
963 		 * OPL platform.
964 		 */
965 		for (i = 0; i < NCPU; i++) {
966 			if (cpunodes[i].nodeid == 0)
967 				continue;
968 
969 			if (IS_JUPITER(cpunodes[i].implementation)) {
970 				njupiter += 1;
971 			}
972 			if (!(IS_OLYMPUS_C(cpunodes[i].implementation) ||
973 			    IS_JUPITER(cpunodes[i].implementation))) {
974 				use_mp = 0;
975 				break;
976 			}
977 		}
978 		break;
979 	default:
980 		/*
981 		 * Check for a homogeneous set of CPUs.
982 		 */
983 		for (i = 0; i < NCPU; i++) {
984 			if (cpunodes[i].nodeid == 0)
985 				continue;
986 
987 			if (cpunodes[i].implementation != impl) {
988 				use_mp = 0;
989 				break;
990 			}
991 		}
992 		break;
993 	}
994 
995 	/*
996 	 * Change from mmu_page_sizes from 4 to 6 for totally-Panther domains,
997 	 * where npanther == ncpunode. Also, set ecache_alignsize (and a few
998 	 * other globals) to the correct value for totally-Panther domains.
999 	 */
1000 	if (&mmu_init_mmu_page_sizes) {
1001 		(void) mmu_init_mmu_page_sizes(npanther);
1002 	}
1003 	if ((npanther == ncpunode) && (&cpu_fix_allpanther)) {
1004 		cpu_fix_allpanther();
1005 	}
1006 
1007 	/*
1008 	 * For all-Jupiter domains the cpu module will update the hwcap features
1009 	 * for integer multiply-add instruction support.
1010 	 */
1011 	if ((njupiter == ncpunode) && (&cpu_fix_alljupiter)) {
1012 		cpu_fix_alljupiter();
1013 	}
1014 
1015 	/*
1016 	 * Set max cpus we can have based on ncpunode and use_mp
1017 	 */
1018 	if (use_mp) {
1019 		int (*set_max_ncpus)(void);
1020 
1021 		set_max_ncpus = (int (*)(void))
1022 		    kobj_getsymvalue("set_platform_max_ncpus", 0);
1023 
1024 		if (set_max_ncpus) {
1025 			max_ncpus = set_max_ncpus();
1026 			if (max_ncpus < ncpunode)
1027 				max_ncpus = ncpunode;
1028 			boot_ncpus = boot_max_ncpus = ncpunode;
1029 		} else {
1030 			max_ncpus = ncpunode;
1031 		}
1032 	} else {
1033 		cmn_err(CE_NOTE, "MP not supported on mismatched modules,"
1034 		    " booting UP only");
1035 
1036 		for (i = 0; i < NCPU; i++) {
1037 			if (cpunodes[i].nodeid == 0)
1038 				continue;
1039 
1040 			cmn_err(CE_NOTE, "cpu%d: %s version 0x%x", i,
1041 			    cpunodes[i].name, cpunodes[i].version);
1042 		}
1043 
1044 		max_ncpus = 1;
1045 	}
1046 }
1047 
1048 /*
1049  * The first sysio must always programmed up for the system clock and error
1050  * handling purposes, referenced by v_sysio_addr in machdep.c.
1051  */
1052 static void
1053 have_sbus(pnode_t node)
1054 {
1055 	int size;
1056 	uint_t portid;
1057 
1058 	size = GETPROPLEN(node, "upa-portid");
1059 	if (size == -1 || size > sizeof (portid))
1060 		cmn_err(CE_PANIC, "upa-portid size");
1061 	if (GETPROP(node, "upa-portid", (caddr_t)&portid) == -1)
1062 		cmn_err(CE_PANIC, "upa-portid");
1063 
1064 	niobus++;
1065 
1066 	/*
1067 	 * need one physical TSB
1068 	 */
1069 	niommu_tsbs++;
1070 }
1071 
1072 
1073 #define	IOMMU_PER_SCHIZO	2
1074 
1075 /*
1076  * The first psycho must always programmed up for the system clock and error
1077  * handling purposes.
1078  */
1079 static void
1080 have_pci(pnode_t node)
1081 {
1082 	int size;
1083 	uint_t portid;
1084 	char compatible[OBP_MAXDRVNAME];
1085 
1086 	size = GETPROPLEN(node, "portid");
1087 	if (size == -1) size = GETPROPLEN(node, "upa-portid");
1088 	if (size == -1)
1089 		return;
1090 	if (size > sizeof (portid))
1091 		cmn_err(CE_PANIC, "portid size wrong");
1092 
1093 	if (GETPROP(node, "portid", (caddr_t)&portid) == -1)
1094 		if (GETPROP(node, "upa-portid", (caddr_t)&portid) == -1)
1095 			cmn_err(CE_PANIC, "portid not found");
1096 
1097 	niobus++;
1098 
1099 
1100 	/*
1101 	 * Need two physical TSBs for Schizo compatible nodes,
1102 	 * one otherwise.
1103 	 */
1104 	compatible[0] = '\0';
1105 	(void) prom_getprop(node, OBP_COMPATIBLE, compatible);
1106 	if (strcmp(compatible, "pci108e,8001") == 0)
1107 		niommu_tsbs += IOMMU_PER_SCHIZO;
1108 	else
1109 		niommu_tsbs++;
1110 }
1111 
1112 /*
1113  * The first eeprom is used as the TOD clock, referenced
1114  * by v_eeprom_addr in locore.s.
1115  */
1116 static void
1117 have_eeprom(pnode_t node)
1118 {
1119 	int size;
1120 	uint32_t eaddr;
1121 
1122 	/*
1123 	 * "todmostek" module will be selected based on finding a "model"
1124 	 * property value of "mk48t59" in the "eeprom" node.
1125 	 */
1126 	if (tod_module_name == NULL) {
1127 		char buf[MAXSYSNAME];
1128 
1129 		if ((GETPROP(node, "model", buf) != -1) &&
1130 		    (strcmp(buf, "mk48t59") == 0))
1131 			tod_module_name = "todmostek";
1132 	}
1133 
1134 	/*
1135 	 * If we have found two distinct eeprom's, then we're done.
1136 	 */
1137 	if (v_eeprom_addr && v_timecheck_addr != v_eeprom_addr)
1138 		return;
1139 
1140 	/*
1141 	 * multiple eeproms may exist but at least
1142 	 * one must have an "address" property
1143 	 */
1144 	if ((size = GETPROPLEN(node, OBP_ADDRESS)) == -1)
1145 		return;
1146 	if (size != sizeof (eaddr))
1147 		cmn_err(CE_PANIC, "eeprom addr size");
1148 	if (GETPROP(node, OBP_ADDRESS, (caddr_t)&eaddr) == -1)
1149 		cmn_err(CE_PANIC, "eeprom addr");
1150 
1151 	/*
1152 	 * If we have a chosen eeprom and it is not this node, keep looking.
1153 	 */
1154 	if (chosen_eeprom != NULL && chosen_eeprom != node) {
1155 		v_timecheck_addr = (caddr_t)(uintptr_t)eaddr;
1156 		return;
1157 	}
1158 
1159 	v_eeprom_addr = (caddr_t)(uintptr_t)eaddr;
1160 
1161 	/*
1162 	 * If we don't find an I/O board to use to check the clock,
1163 	 * we'll fall back on whichever TOD is available.
1164 	 */
1165 	if (v_timecheck_addr == NULL)
1166 		v_timecheck_addr = v_eeprom_addr;
1167 
1168 	/*
1169 	 * Does this eeprom have watchdog support?
1170 	 */
1171 	if (GETPROPLEN(node, WATCHDOG_ENABLE) != -1)
1172 		watchdog_available = 1;
1173 }
1174 
1175 static void
1176 have_rtc(pnode_t node)
1177 {
1178 	int size;
1179 	uint32_t eaddr;
1180 
1181 	/*
1182 	 * "ds1287" module will be selected based on finding a "model"
1183 	 * property value of "ds1287" in the "rtc" node.
1184 	 */
1185 	if (tod_module_name == NULL) {
1186 		char buf[MAXSYSNAME];
1187 
1188 		if (GETPROP(node, "model", buf) != -1) {
1189 			if ((strcmp(buf, "m5819p") == 0) ||
1190 			    (strcmp(buf, "m5823") == 0))
1191 				tod_module_name = "todm5823";
1192 			else if (strcmp(buf, "ds1287") == 0)
1193 				tod_module_name = "todds1287";
1194 		}
1195 	}
1196 
1197 	/*
1198 	 * XXX - drives on if address prop doesn't exist, later falls
1199 	 * over in tod module
1200 	 */
1201 	if ((size = GETPROPLEN(node, OBP_ADDRESS)) == -1)
1202 		return;
1203 	if (size != sizeof (eaddr))
1204 		cmn_err(CE_PANIC, "rtc addr size");
1205 	if (GETPROP(node, OBP_ADDRESS, (caddr_t)&eaddr) == -1)
1206 		cmn_err(CE_PANIC, "rtc addr");
1207 
1208 	v_rtc_addr_reg = (caddr_t)(uintptr_t)eaddr;
1209 	v_rtc_data_reg = (volatile unsigned char *)(uintptr_t)eaddr + 1;
1210 
1211 	/*
1212 	 * Does this rtc have watchdog support?
1213 	 */
1214 	if (GETPROPLEN(node, WATCHDOG_ENABLE) != -1)
1215 		watchdog_available = 1;
1216 }
1217 
1218 static void
1219 have_pmc(pnode_t node)
1220 {
1221 	uint32_t vaddr;
1222 	pnode_t root;
1223 
1224 	/*
1225 	 * Watchdog property is in the root node.
1226 	 */
1227 	root = prom_nextnode((pnode_t)0);
1228 	if (GETPROPLEN(root, WATCHDOG_ENABLE) != -1) {
1229 		/*
1230 		 * The hardware watchdog timer resides within logical
1231 		 * unit 8 of SuperI/O. The address property of the node
1232 		 * contains the virtual address that we use to program
1233 		 * the timer.
1234 		 */
1235 		if (GETPROP(node, OBP_ADDRESS, (caddr_t)&vaddr) == -1) {
1236 			watchdog_available = 0;
1237 			return;
1238 		}
1239 		v_pmc_addr_reg = (volatile uint8_t *)(uintptr_t)vaddr;
1240 		v_pmc_data_reg = (volatile uint8_t *)(uintptr_t)vaddr + 1;
1241 		watchdog_available = 1;
1242 	}
1243 }
1244 
1245 static void
1246 have_auxio(pnode_t node)
1247 {
1248 	size_t size, n;
1249 	uint32_t addr[5];
1250 
1251 	/*
1252 	 * Get the size of the auzio's address property.
1253 	 * On some platforms, the address property contains one
1254 	 * entry and on others it contains five entries.
1255 	 * In all cases, the first entries are compatible.
1256 	 *
1257 	 * This routine gets the address property for the auxio
1258 	 * node and stores the first entry in v_auxio_addr which
1259 	 * is used by the routine set_auxioreg in sun4u/ml/locore.s.
1260 	 */
1261 	if ((size = GETPROPLEN(node, OBP_ADDRESS)) == -1)
1262 		cmn_err(CE_PANIC, "no auxio address property");
1263 
1264 	switch (n = (size / sizeof (addr[0]))) {
1265 	case 1:
1266 		break;
1267 	case 5:
1268 		break;
1269 	default:
1270 		cmn_err(CE_PANIC, "auxio addr has %lu entries?", n);
1271 	}
1272 
1273 	if (GETPROP(node, OBP_ADDRESS, (caddr_t)addr) == -1)
1274 		cmn_err(CE_PANIC, "auxio addr");
1275 
1276 	v_auxio_addr = (caddr_t)(uintptr_t)(addr[0]); /* make into pointer */
1277 }
1278 
1279 static void
1280 have_tod(pnode_t node)
1281 {
1282 	static char tod_name[MAXSYSNAME];
1283 
1284 	if (GETPROP(node, OBP_NAME, (caddr_t)tod_name) == -1)
1285 		cmn_err(CE_PANIC, "tod name");
1286 	/*
1287 	 * This is a node with "device_type" property value of "tod".
1288 	 * Name of the tod module is the name from the node.
1289 	 */
1290 	tod_module_name = tod_name;
1291 }
1292