xref: /illumos-gate/usr/src/uts/sun4u/enchilada/os/enchilada.c (revision aa693e996c2928c92cccd8a3efe91373e85a6967)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #pragma ident	"%Z%%M%	%I%	%E% SMI"
27 
28 #include <sys/param.h>
29 #include <sys/systm.h>
30 #include <sys/sysmacros.h>
31 #include <sys/sunddi.h>
32 #include <sys/esunddi.h>
33 #include <sys/platform_module.h>
34 #include <sys/errno.h>
35 #include <sys/lgrp.h>
36 #include <sys/memnode.h>
37 #include <sys/promif.h>
38 
39 int (*p2get_mem_unum)(int, uint64_t, char *, int, int *);
40 
41 void
42 startup_platform(void)
43 {
44 }
45 
46 int
47 set_platform_tsb_spares()
48 {
49 	return (0);
50 }
51 
52 void
53 set_platform_defaults(void)
54 {
55 }
56 
57 /*
58  * Definitions for accessing the pci config space of the isa node
59  * of Southbridge.
60  */
61 #define	ENCHILADA_ISA_PATHNAME	"/pci@1e,600000/isa@7"
62 static ddi_acc_handle_t isa_handle;		/* handle for isa pci space */
63 
64 
65 void
66 load_platform_drivers(void)
67 {
68 	dev_info_t 		*dip;		/* dip of the isa driver */
69 
70 	/*
71 	 * Install power driver which handles the power button.
72 	 */
73 	if (i_ddi_attach_hw_nodes("power") != DDI_SUCCESS)
74 		cmn_err(CE_WARN, "Failed to install \"power\" driver.");
75 	(void) ddi_hold_driver(ddi_name_to_major("power"));
76 
77 	/*
78 	 * It is OK to return error because 'us' driver is not available
79 	 * in all clusters (e.g. missing in Core cluster).
80 	 */
81 	(void) i_ddi_attach_hw_nodes("us");
82 
83 	if (i_ddi_attach_hw_nodes("grbeep") != DDI_SUCCESS)
84 		cmn_err(CE_WARN, "Failed to install \"beep\" driver.");
85 
86 
87 	/*
88 	 * mc-us3i must stay loaded for plat_get_mem_unum()
89 	 */
90 	if (i_ddi_attach_hw_nodes("mc-us3i") != DDI_SUCCESS)
91 		cmn_err(CE_WARN, "mc-us3i driver failed to install");
92 	(void) ddi_hold_driver(ddi_name_to_major("mc-us3i"));
93 
94 	/*
95 	 * Install Isa driver. This is required for the southbridge IDE
96 	 * workaround - to reset the IDE channel during IDE bus reset.
97 	 * Panic the system in case ISA driver could not be loaded or
98 	 * any problem in accessing its pci config space. Since the register
99 	 * to reset the channel for IDE is in ISA config space!.
100 	 */
101 
102 	dip = e_ddi_hold_devi_by_path(ENCHILADA_ISA_PATHNAME, 0);
103 	if (dip == NULL) {
104 		cmn_err(CE_PANIC, "Could not install the isa driver\n");
105 		return;
106 	}
107 
108 	if (pci_config_setup(dip, &isa_handle) != DDI_SUCCESS) {
109 		cmn_err(CE_PANIC, "Could not get the config space of isa\n");
110 		return;
111 	}
112 }
113 
114 /*
115  * This routine provides a workaround for a bug in the SB chip which
116  * can cause data corruption. Will be invoked from the IDE HBA driver for
117  * Acer SouthBridge at the time of IDE bus reset.
118  */
119 /*ARGSUSED*/
120 int
121 plat_ide_chipreset(dev_info_t *dip, int chno)
122 {
123 	uint8_t	val;
124 	int	ret = DDI_SUCCESS;
125 
126 	if (isa_handle == NULL) {
127 		return (DDI_FAILURE);
128 	}
129 
130 	val = pci_config_get8(isa_handle, 0x58);
131 	/*
132 	 * The dip passed as the argument is not used here.
133 	 * This will be needed for platforms which have multiple on-board SB,
134 	 * The dip passed will be used to match the corresponding ISA node.
135 	 */
136 	switch (chno) {
137 		case 0:
138 			/*
139 			 * First disable the primary channel then re-enable it.
140 			 * As per ALI no wait should be required in between have
141 			 * given 1ms delay in between to be on safer side.
142 			 * bit 2 of register 0x58 when 0 disable the channel 0.
143 			 * bit 2 of register 0x58 when 1 enables the channel 0.
144 			 */
145 			pci_config_put8(isa_handle, 0x58, val & 0xFB);
146 			drv_usecwait(1000);
147 			pci_config_put8(isa_handle, 0x58, val);
148 			break;
149 		case 1:
150 			/*
151 			 * bit 3 of register 0x58 when 0 disable the channel 1.
152 			 * bit 3 of register 0x58 when 1 enables the channel 1.
153 			 */
154 			pci_config_put8(isa_handle, 0x58, val & 0xF7);
155 			drv_usecwait(1000);
156 			pci_config_put8(isa_handle, 0x58, val);
157 			break;
158 		default:
159 			/*
160 			 * Unknown channel number passed. Return failure.
161 			 */
162 			ret = DDI_FAILURE;
163 	}
164 
165 	return (ret);
166 }
167 
168 
169 /*ARGSUSED*/
170 int
171 plat_cpu_poweron(struct cpu *cp)
172 {
173 	return (ENOTSUP);	/* not supported on this platform */
174 }
175 
176 /*ARGSUSED*/
177 int
178 plat_cpu_poweroff(struct cpu *cp)
179 {
180 	return (ENOTSUP);	/* not supported on this platform */
181 }
182 
183 /*ARGSUSED*/
184 void
185 plat_freelist_process(int mnode)
186 {
187 }
188 
189 char *platform_module_list[] = {
190 	"m1535ppm",
191 	"jbusppm",
192 	"ics951601",
193 	"pca9556",
194 	"ppm",
195 	(char *)0
196 };
197 
198 /*ARGSUSED*/
199 void
200 plat_tod_fault(enum tod_fault_type tod_bad)
201 {
202 }
203 
204 /*ARGSUSED*/
205 int
206 plat_get_mem_unum(int synd_code, uint64_t flt_addr, int flt_bus_id,
207     int flt_in_memory, ushort_t flt_status, char *buf, int buflen, int *lenp)
208 {
209 	if (flt_in_memory && (p2get_mem_unum != NULL))
210 		return (p2get_mem_unum(synd_code, P2ALIGN(flt_addr, 8),
211 		    buf, buflen, lenp));
212 	else
213 		return (ENOTSUP);
214 }
215 
216 /*ARGSUSED*/
217 int
218 plat_get_cpu_unum(int cpuid, char *buf, int buflen, int *lenp)
219 {
220 	if (snprintf(buf, buflen, "MB") >= buflen) {
221 		return (ENOSPC);
222 	} else {
223 		*lenp = strlen(buf);
224 		return (0);
225 	}
226 }
227 
228 /*
229  * Fiesta support for lgroups.
230  *
231  * On fiesta platform, an lgroup platform handle == CPU id
232  */
233 
234 /*
235  * Macro for extracting the CPU number from the CPU id
236  */
237 #define	CPUID_TO_LGRP(id)	((id) & 0x7)
238 #define	ENCHILADA_MC_SHIFT	36
239 
240 /*
241  * Return the platform handle for the lgroup containing the given CPU
242  */
243 lgrp_handle_t
244 plat_lgrp_cpu_to_hand(processorid_t id)
245 {
246 	return (CPUID_TO_LGRP(id));
247 }
248 
249 /*
250  * Platform specific lgroup initialization
251  */
252 void
253 plat_lgrp_init(void)
254 {
255 	pnode_t		curnode;
256 	char		tmp_name[MAXSYSNAME];
257 	int		portid;
258 	int		cpucnt = 0;
259 	int		max_portid = -1;
260 	extern uint32_t lgrp_expand_proc_thresh;
261 	extern uint32_t lgrp_expand_proc_diff;
262 	extern pgcnt_t	lgrp_mem_free_thresh;
263 	extern uint32_t lgrp_loadavg_tolerance;
264 	extern uint32_t lgrp_loadavg_max_effect;
265 	extern uint32_t lgrp_load_thresh;
266 	extern lgrp_mem_policy_t  lgrp_mem_policy_root;
267 
268 	/*
269 	 * Count the number of CPUs installed to determine if
270 	 * NUMA optimization should be enabled or not.
271 	 *
272 	 * All CPU nodes reside in the root node and have a
273 	 * device type "cpu".
274 	 */
275 	curnode = prom_rootnode();
276 	for (curnode = prom_childnode(curnode); curnode;
277 	    curnode = prom_nextnode(curnode)) {
278 		bzero(tmp_name, MAXSYSNAME);
279 		if (prom_getprop(curnode, OBP_NAME, (caddr_t)tmp_name) == -1 ||
280 		    prom_getprop(curnode, OBP_DEVICETYPE, tmp_name) == -1 ||
281 		    strcmp(tmp_name, "cpu") != 0)
282 			continue;
283 
284 		cpucnt++;
285 		if (prom_getprop(curnode, "portid", (caddr_t)&portid) != -1 &&
286 		    portid > max_portid)
287 			max_portid = portid;
288 	}
289 	if (cpucnt <= 1)
290 		max_mem_nodes = 1;
291 	else if (max_portid >= 0 && max_portid < MAX_MEM_NODES)
292 		max_mem_nodes = max_portid + 1;
293 
294 	/*
295 	 * Set tuneables for fiesta architecture
296 	 *
297 	 * lgrp_expand_proc_thresh is the minimum load on the lgroups
298 	 * this process is currently running on before considering
299 	 * expanding threads to another lgroup.
300 	 *
301 	 * lgrp_expand_proc_diff determines how much less the remote lgroup
302 	 * must be loaded before expanding to it.
303 	 *
304 	 * Optimize for memory bandwidth by spreading multi-threaded
305 	 * program to different lgroups.
306 	 */
307 	lgrp_expand_proc_thresh = lgrp_loadavg_max_effect - 1;
308 	lgrp_expand_proc_diff = lgrp_loadavg_max_effect / 2;
309 	lgrp_loadavg_tolerance = lgrp_loadavg_max_effect / 2;
310 	lgrp_mem_free_thresh = 1;	/* home lgrp must have some memory */
311 	lgrp_expand_proc_thresh = lgrp_loadavg_max_effect - 1;
312 	lgrp_mem_policy_root = LGRP_MEM_POLICY_NEXT;
313 	lgrp_load_thresh = 0;
314 
315 	mem_node_pfn_shift = ENCHILADA_MC_SHIFT - MMU_PAGESHIFT;
316 }
317 
318 /*
319  * Return latency between "from" and "to" lgroups
320  *
321  * This latency number can only be used for relative comparison
322  * between lgroups on the running system, cannot be used across platforms,
323  * and may not reflect the actual latency.  It is platform and implementation
324  * specific, so platform gets to decide its value.  It would be nice if the
325  * number was at least proportional to make comparisons more meaningful though.
326  * NOTE: The numbers below are supposed to be load latencies for uncached
327  * memory divided by 10.
328  */
329 int
330 plat_lgrp_latency(lgrp_handle_t from, lgrp_handle_t to)
331 {
332 	/*
333 	 * Return remote latency when there are more than two lgroups
334 	 * (root and child) and getting latency between two different
335 	 * lgroups or root is involved
336 	 */
337 	if (lgrp_optimizations() && (from != to ||
338 	    from == LGRP_DEFAULT_HANDLE || to == LGRP_DEFAULT_HANDLE))
339 		return (17);
340 	else
341 		return (12);
342 }
343 
344 int
345 plat_pfn_to_mem_node(pfn_t pfn)
346 {
347 	ASSERT(max_mem_nodes > 1);
348 	return (pfn >> mem_node_pfn_shift);
349 }
350 
351 /*
352  * Assign memnode to lgroups
353  */
354 void
355 plat_fill_mc(pnode_t nodeid)
356 {
357 	int		portid;
358 
359 	/*
360 	 * Enchilada memory controller portid == global CPU id
361 	 */
362 	if ((prom_getprop(nodeid, "portid", (caddr_t)&portid) == -1) ||
363 	    (portid < 0))
364 		return;
365 
366 	if (portid < max_mem_nodes)
367 		plat_assign_lgrphand_to_mem_node(portid, portid);
368 }
369