1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2007 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #pragma ident "%Z%%M% %I% %E% SMI" 27 28 #include <sys/types.h> 29 #include <sys/systm.h> 30 #include <sys/archsystm.h> 31 #include <sys/machsystm.h> 32 #include <sys/disp.h> 33 #include <sys/autoconf.h> 34 #include <sys/promif.h> 35 #include <sys/prom_plat.h> 36 #include <sys/clock.h> 37 #include <sys/pte.h> 38 #include <sys/scb.h> 39 #include <sys/cpu.h> 40 #include <sys/stack.h> 41 #include <sys/intreg.h> 42 #include <sys/ivintr.h> 43 #include <vm/as.h> 44 #include <vm/hat_sfmmu.h> 45 #include <sys/reboot.h> 46 #include <sys/sysmacros.h> 47 #include <sys/vtrace.h> 48 #include <sys/trap.h> 49 #include <sys/machtrap.h> 50 #include <sys/privregs.h> 51 #include <sys/machpcb.h> 52 #include <sys/proc.h> 53 #include <sys/cpupart.h> 54 #include <sys/pset.h> 55 #include <sys/cpu_module.h> 56 #include <sys/copyops.h> 57 #include <sys/panic.h> 58 #include <sys/bootconf.h> /* for bootops */ 59 #include <sys/pg.h> 60 #include <sys/kdi.h> 61 #include <sys/fpras.h> 62 63 #include <sys/prom_debug.h> 64 #include <sys/debug.h> 65 66 #include <sys/sunddi.h> 67 #include <sys/lgrp.h> 68 #include <sys/traptrace.h> 69 /* 70 * External Routines: 71 */ 72 extern void map_wellknown_devices(void); 73 extern void hsvc_setup(void); 74 extern void mach_descrip_startup_init(void); 75 extern void mach_soft_state_init(void); 76 77 int dcache_size; 78 int dcache_linesize; 79 int icache_size; 80 int icache_linesize; 81 int ecache_size; 82 int ecache_alignsize; 83 int ecache_associativity; 84 int ecache_setsize; /* max possible e$ setsize */ 85 int cpu_setsize; /* max e$ setsize of configured cpus */ 86 int dcache_line_mask; /* spitfire only */ 87 int vac_size; /* cache size in bytes */ 88 uint_t vac_mask; /* VAC alignment consistency mask */ 89 int vac_shift; /* log2(vac_size) for ppmapout() */ 90 int vac = 0; /* virtual address cache type (none == 0) */ 91 92 /* 93 * fpRAS. An individual sun4* machine class (or perhaps subclass, 94 * eg sun4u/cheetah) must set fpras_implemented to indicate that it implements 95 * the fpRAS feature. The feature can be suppressed by setting fpras_disable 96 * or the mechanism can be disabled for individual copy operations with 97 * fpras_disableids. All these are checked in post_startup() code so 98 * fpras_disable and fpras_disableids can be set in /etc/system. 99 * If/when fpRAS is implemented on non-sun4 architectures these 100 * definitions will need to move up to the common level. 101 */ 102 int fpras_implemented; 103 int fpras_disable; 104 int fpras_disableids; 105 106 /* 107 * Static Routines: 108 */ 109 static void kern_splr_preprom(void); 110 static void kern_splx_postprom(void); 111 112 /* 113 * Setup routine called right before main(). Interposing this function 114 * before main() allows us to call it in a machine-independent fashion. 115 */ 116 117 void 118 mlsetup(struct regs *rp, void *cif, kfpu_t *fp) 119 { 120 struct machpcb *mpcb; 121 122 extern char t0stack[]; 123 extern struct classfuncs sys_classfuncs; 124 extern disp_t cpu0_disp; 125 unsigned long long pa; 126 127 #ifdef TRAPTRACE 128 TRAP_TRACE_CTL *ctlp; 129 #endif /* TRAPTRACE */ 130 131 /* 132 * initialize cpu_self 133 */ 134 cpu0.cpu_self = &cpu0; 135 136 /* 137 * initialize t0 138 */ 139 t0.t_stk = (caddr_t)rp - REGOFF; 140 /* Can't use va_to_pa here - wait until prom_ initialized */ 141 t0.t_stkbase = t0stack; 142 t0.t_pri = maxclsyspri - 3; 143 t0.t_schedflag = TS_LOAD | TS_DONT_SWAP; 144 t0.t_procp = &p0; 145 t0.t_plockp = &p0lock.pl_lock; 146 t0.t_lwp = &lwp0; 147 t0.t_forw = &t0; 148 t0.t_back = &t0; 149 t0.t_next = &t0; 150 t0.t_prev = &t0; 151 t0.t_cpu = &cpu0; /* loaded by _start */ 152 t0.t_disp_queue = &cpu0_disp; 153 t0.t_bind_cpu = PBIND_NONE; 154 t0.t_bind_pset = PS_NONE; 155 t0.t_cpupart = &cp_default; 156 t0.t_clfuncs = &sys_classfuncs.thread; 157 t0.t_copyops = NULL; 158 THREAD_ONPROC(&t0, CPU); 159 160 lwp0.lwp_thread = &t0; 161 lwp0.lwp_procp = &p0; 162 lwp0.lwp_regs = (void *)rp; 163 t0.t_tid = p0.p_lwpcnt = p0.p_lwprcnt = p0.p_lwpid = 1; 164 165 mpcb = lwptompcb(&lwp0); 166 mpcb->mpcb_fpu = fp; 167 mpcb->mpcb_fpu->fpu_q = mpcb->mpcb_fpu_q; 168 mpcb->mpcb_thread = &t0; 169 lwp0.lwp_fpu = (void *)mpcb->mpcb_fpu; 170 171 p0.p_exec = NULL; 172 p0.p_stat = SRUN; 173 p0.p_flag = SSYS; 174 p0.p_tlist = &t0; 175 p0.p_stksize = 2*PAGESIZE; 176 p0.p_stkpageszc = 0; 177 p0.p_as = &kas; 178 p0.p_lockp = &p0lock; 179 p0.p_utraps = NULL; 180 p0.p_brkpageszc = 0; 181 sigorset(&p0.p_ignore, &ignoredefault); 182 183 CPU->cpu_thread = &t0; 184 CPU->cpu_dispthread = &t0; 185 bzero(&cpu0_disp, sizeof (disp_t)); 186 CPU->cpu_disp = &cpu0_disp; 187 CPU->cpu_disp->disp_cpu = CPU; 188 CPU->cpu_idle_thread = &t0; 189 CPU->cpu_flags = CPU_RUNNING; 190 CPU->cpu_id = getprocessorid(); 191 CPU->cpu_dispatch_pri = t0.t_pri; 192 193 /* 194 * Initialize thread/cpu microstate accounting here 195 */ 196 init_mstate(&t0, LMS_SYSTEM); 197 init_cpu_mstate(CPU, CMS_SYSTEM); 198 199 /* 200 * Initialize lists of available and active CPUs. 201 */ 202 cpu_list_init(CPU); 203 204 cpu_vm_data_init(CPU); 205 206 prom_init("kernel", cif); 207 (void) prom_set_preprom(kern_splr_preprom); 208 (void) prom_set_postprom(kern_splx_postprom); 209 210 PRM_INFO("mlsetup: now ok to call prom_printf"); 211 212 mpcb->mpcb_pa = va_to_pa(t0.t_stk); 213 214 /* 215 * Claim the physical and virtual resources used by panicbuf, 216 * then map panicbuf. This operation removes the phys and 217 * virtual addresses from the free lists. 218 */ 219 if (prom_claim_virt(PANICBUFSIZE, panicbuf) != panicbuf) 220 prom_panic("Can't claim panicbuf virtual address"); 221 222 if (prom_retain("panicbuf", PANICBUFSIZE, MMU_PAGESIZE, &pa) != 0) 223 prom_panic("Can't allocate retained panicbuf physical address"); 224 225 if (prom_map_phys(-1, PANICBUFSIZE, panicbuf, pa) != 0) 226 prom_panic("Can't map panicbuf"); 227 228 PRM_DEBUG(panicbuf); 229 PRM_DEBUG(pa); 230 231 /* 232 * Negotiate hypervisor services, if any 233 */ 234 hsvc_setup(); 235 mach_soft_state_init(); 236 237 #ifdef TRAPTRACE 238 /* 239 * initialize the trap trace buffer for the boot cpu 240 * XXX todo, dynamically allocate this buffer too 241 */ 242 ctlp = &trap_trace_ctl[CPU->cpu_id]; 243 ctlp->d.vaddr_base = trap_tr0; 244 ctlp->d.offset = ctlp->d.last_offset = 0; 245 ctlp->d.limit = TRAP_TSIZE; /* XXX dynamic someday */ 246 ctlp->d.paddr_base = va_to_pa(trap_tr0); 247 #endif /* TRAPTRACE */ 248 249 /* 250 * Initialize the Machine Description kernel framework 251 */ 252 253 mach_descrip_startup_init(); 254 255 /* 256 * initialize HV trap trace buffer for the boot cpu 257 */ 258 mach_htraptrace_setup(CPU->cpu_id); 259 mach_htraptrace_configure(CPU->cpu_id); 260 261 /* 262 * lgroup framework initialization. This must be done prior 263 * to devices being mapped. 264 */ 265 lgrp_init(); 266 267 cpu_setup(); 268 269 if (boothowto & RB_HALT) { 270 prom_printf("unix: kernel halted by -h flag\n"); 271 prom_enter_mon(); 272 } 273 274 setcputype(); 275 map_wellknown_devices(); 276 setcpudelay(); 277 } 278 279 /* 280 * These routines are called immediately before and 281 * immediately after calling into the firmware. The 282 * firmware is significantly confused by preemption - 283 * particularly on MP machines - but also on UP's too. 284 */ 285 286 static int saved_spl; 287 288 static void 289 kern_splr_preprom(void) 290 { 291 saved_spl = spl7(); 292 } 293 294 static void 295 kern_splx_postprom(void) 296 { 297 splx(saved_spl); 298 } 299