xref: /illumos-gate/usr/src/uts/sun4/os/ddi_impl.c (revision 6dfee4834394825da35b977ca71cdc965bc7b6a4)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License, Version 1.0 only
 * (the "License").  You may not use this file except in compliance
 * with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#pragma ident	"%Z%%M%	%I%	%E% SMI"

/*
 * sun4 specific DDI implementation
 */
#include <sys/cpuvar.h>
#include <sys/ddi_subrdefs.h>
#include <sys/machsystm.h>
#include <sys/sunndi.h>
#include <sys/sysmacros.h>
#include <sys/ontrap.h>
#include <vm/seg_kmem.h>
#include <sys/membar.h>
#include <sys/dditypes.h>
#include <sys/ndifm.h>
#include <sys/fm/io/ddi.h>
#include <sys/ivintr.h>
#include <sys/bootconf.h>
#include <sys/conf.h>
#include <sys/ethernet.h>
#include <sys/idprom.h>
#include <sys/promif.h>
#include <sys/prom_plat.h>
#include <sys/systeminfo.h>
#include <sys/fpu/fpusystm.h>
#include <sys/vm.h>
#include <sys/fs/dv_node.h>
#include <sys/fs/snode.h>
#include <sys/ddi_isa.h>

dev_info_t *get_intr_parent(dev_info_t *, dev_info_t *,
    ddi_intr_handle_impl_t *);
#pragma weak get_intr_parent

int process_intr_ops(dev_info_t *, dev_info_t *, ddi_intr_op_t,
    ddi_intr_handle_impl_t *, void *);
#pragma weak process_intr_ops

void cells_1275_copy(prop_1275_cell_t *, prop_1275_cell_t *, int32_t);
    prop_1275_cell_t *cells_1275_cmp(prop_1275_cell_t *, prop_1275_cell_t *,
    int32_t len);
#pragma weak cells_1275_copy

/*
 * Wrapper for ddi_prop_lookup_int_array().
 * This is handy because it returns the prop length in
 * bytes which is what most of the callers require.
 */

static int
get_prop_int_array(dev_info_t *di, char *pname, int **pval, uint_t *plen)
{
	int ret;

	if ((ret = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, di,
	    DDI_PROP_DONTPASS, pname, pval, plen)) == DDI_PROP_SUCCESS) {
		*plen = (*plen) * (uint_t)sizeof (int);
	}
	return (ret);
}

/*
 * SECTION: DDI Node Configuration
 */

/*
 * init_regspec_64:
 *
 * If the parent #size-cells is 2, convert the upa-style or
 * safari-style reg property from 2-size cells to 1 size cell
 * format, ignoring the size_hi, which must be zero for devices.
 * (It won't be zero in the memory list properties in the memory
 * nodes, but that doesn't matter here.)
 */
struct ddi_parent_private_data *
init_regspec_64(dev_info_t *dip)
{
	struct ddi_parent_private_data *pd;
	dev_info_t *parent;
	int size_cells;

	/*
	 * If there are no "reg"s in the child node, return.
	 */
	pd = ddi_get_parent_data(dip);
	if ((pd == NULL) || (pd->par_nreg == 0)) {
		return (pd);
	}
	parent = ddi_get_parent(dip);

	size_cells = ddi_prop_get_int(DDI_DEV_T_ANY, parent,
	    DDI_PROP_DONTPASS, "#size-cells", 1);

	if (size_cells != 1)  {

		int n, j;
		struct regspec *irp;
		struct reg_64 {
			uint_t addr_hi, addr_lo, size_hi, size_lo;
		};
		struct reg_64 *r64_rp;
		struct regspec *rp;
		uint_t len = 0;
		int *reg_prop;

		ASSERT(size_cells == 2);

		/*
		 * We already looked the property up once before if
		 * pd is non-NULL.
		 */
		(void) ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip,
		    DDI_PROP_DONTPASS, OBP_REG, &reg_prop, &len);
		ASSERT(len != 0);

		n = sizeof (struct reg_64) / sizeof (int);
		n = len / n;

		/*
		 * We're allocating a buffer the size of the PROM's property,
		 * but we're only using a smaller portion when we assign it
		 * to a regspec.  We do this so that in the
		 * impl_ddi_sunbus_removechild function, we will
		 * always free the right amount of memory.
		 */
		irp = rp = (struct regspec *)reg_prop;
		r64_rp = (struct reg_64 *)pd->par_reg;

		for (j = 0; j < n; ++j, ++rp, ++r64_rp) {
			ASSERT(r64_rp->size_hi == 0);
			rp->regspec_bustype = r64_rp->addr_hi;
			rp->regspec_addr = r64_rp->addr_lo;
			rp->regspec_size = r64_rp->size_lo;
		}

		ddi_prop_free((void *)pd->par_reg);
		pd->par_nreg = n;
		pd->par_reg = irp;
	}
	return (pd);
}

/*
 * Create a ddi_parent_private_data structure from the ddi properties of
 * the dev_info node.
 *
 * The "reg" is required if the driver wishes to create mappings on behalf
 * of the device. The "reg" property is assumed to be a list of at least
 * one triplet
 *
 *	<bustype, address, size>*1
 *
 * The "interrupt" property is no longer part of parent private data on
 * sun4u. The interrupt parent is may not be the device tree parent.
 *
 * The "ranges" property describes the mapping of child addresses to parent
 * addresses.
 *
 * N.B. struct rangespec is defined for the following default values:
 *			parent  child
 *	#address-cells	2	2
 *	#size-cells	1	1
 * This function doesn't deal with non-default cells and will not create
 * ranges in such cases.
 */
void
make_ddi_ppd(dev_info_t *child, struct ddi_parent_private_data **ppd)
{
	struct ddi_parent_private_data *pdptr;
	int *reg_prop, *rng_prop;
	uint_t reg_len = 0, rng_len = 0;
	dev_info_t *parent;
	int parent_addr_cells, parent_size_cells;
	int child_addr_cells, child_size_cells;

	*ppd = pdptr = kmem_zalloc(sizeof (*pdptr), KM_SLEEP);

	/*
	 * root node has no parent private data, so *ppd should
	 * be initialized for naming to work properly.
	 */
	if ((parent = ddi_get_parent(child)) == NULL)
		return;

	/*
	 * Set reg field of parent data from "reg" property
	 */
	if ((get_prop_int_array(child, OBP_REG, &reg_prop, &reg_len)
	    == DDI_PROP_SUCCESS) && (reg_len != 0)) {
		pdptr->par_nreg = (int)(reg_len / sizeof (struct regspec));
		pdptr->par_reg = (struct regspec *)reg_prop;
	}

	/*
	 * "ranges" property ...
	 *
	 * This function does not handle cases where #address-cells != 2
	 * and * min(parent, child) #size-cells != 1 (see bugid 4211124).
	 *
	 * Nexus drivers with such exceptions (e.g. pci ranges)
	 * should either create a separate function for handling
	 * ranges or not use parent private data to store ranges.
	 */

	/* root node has no ranges */
	if ((parent = ddi_get_parent(child)) == NULL)
		return;

	child_addr_cells = ddi_prop_get_int(DDI_DEV_T_ANY, child,
	    DDI_PROP_DONTPASS, "#address-cells", 2);
	child_size_cells = ddi_prop_get_int(DDI_DEV_T_ANY, child,
	    DDI_PROP_DONTPASS, "#size-cells", 1);
	parent_addr_cells = ddi_prop_get_int(DDI_DEV_T_ANY, parent,
	    DDI_PROP_DONTPASS, "#address-cells", 2);
	parent_size_cells = ddi_prop_get_int(DDI_DEV_T_ANY, parent,
	    DDI_PROP_DONTPASS, "#size-cells", 1);
	if (child_addr_cells != 2 || parent_addr_cells != 2 ||
	    (child_size_cells != 1 && parent_size_cells != 1)) {
		NDI_CONFIG_DEBUG((CE_NOTE, "!ranges not made in parent data; "
		    "#address-cells or #size-cells have non-default value"));
		return;
	}

	if (get_prop_int_array(child, OBP_RANGES, &rng_prop, &rng_len)
	    == DDI_PROP_SUCCESS) {
		pdptr->par_nrng = rng_len / (int)(sizeof (struct rangespec));
		pdptr->par_rng = (struct rangespec *)rng_prop;
	}
}

/*
 * Free ddi_parent_private_data structure
 */
void
impl_free_ddi_ppd(dev_info_t *dip)
{
	struct ddi_parent_private_data *pdptr = ddi_get_parent_data(dip);

	if (pdptr == NULL)
		return;

	if (pdptr->par_nrng != 0)
		ddi_prop_free((void *)pdptr->par_rng);

	if (pdptr->par_nreg != 0)
		ddi_prop_free((void *)pdptr->par_reg);

	kmem_free(pdptr, sizeof (*pdptr));
	ddi_set_parent_data(dip, NULL);
}

/*
 * Name a child of sun busses based on the reg spec.
 * Handles the following properties:
 *
 *	Property	value
 *	Name		type
 *
 *	reg		register spec
 *	interrupts	new (bus-oriented) interrupt spec
 *	ranges		range spec
 *
 * This may be called multiple times, independent of
 * initchild calls.
 */
static int
impl_sunbus_name_child(dev_info_t *child, char *name, int namelen)
{
	struct ddi_parent_private_data *pdptr;
	struct regspec *rp;

	/*
	 * Fill in parent-private data and this function returns to us
	 * an indication if it used "registers" to fill in the data.
	 */
	if (ddi_get_parent_data(child) == NULL) {
		make_ddi_ppd(child, &pdptr);
		ddi_set_parent_data(child, pdptr);
	}

	/*
	 * No reg property, return null string as address
	 * (e.g. root node)
	 */
	name[0] = '\0';
	if (sparc_pd_getnreg(child) == 0) {
		return (DDI_SUCCESS);
	}

	rp = sparc_pd_getreg(child, 0);
	(void) snprintf(name, namelen, "%x,%x",
	    rp->regspec_bustype, rp->regspec_addr);
	return (DDI_SUCCESS);
}


/*
 * Called from the bus_ctl op of some drivers.
 * to implement the DDI_CTLOPS_INITCHILD operation.
 *
 * NEW drivers should NOT use this function, but should declare
 * there own initchild/uninitchild handlers. (This function assumes
 * the layout of the parent private data and the format of "reg",
 * "ranges", "interrupts" properties and that #address-cells and
 * #size-cells of the parent bus are defined to be default values.)
 */
int
impl_ddi_sunbus_initchild(dev_info_t *child)
{
	char name[MAXNAMELEN];

	(void) impl_sunbus_name_child(child, name, MAXNAMELEN);
	ddi_set_name_addr(child, name);

	/*
	 * Try to merge .conf node. If successful, return failure to
	 * remove this child.
	 */
	if ((ndi_dev_is_persistent_node(child) == 0) &&
	    (ndi_merge_node(child, impl_sunbus_name_child) == DDI_SUCCESS)) {
		impl_ddi_sunbus_removechild(child);
		return (DDI_FAILURE);
	}
	return (DDI_SUCCESS);
}

/*
 * A better name for this function would be impl_ddi_sunbus_uninitchild()
 * It does not remove the child, it uninitializes it, reclaiming the
 * resources taken by impl_ddi_sunbus_initchild.
 */
void
impl_ddi_sunbus_removechild(dev_info_t *dip)
{
	impl_free_ddi_ppd(dip);
	ddi_set_name_addr(dip, NULL);
	/*
	 * Strip the node to properly convert it back to prototype form
	 */
	impl_rem_dev_props(dip);
}

/*
 * SECTION: DDI Interrupt
 */

void
cells_1275_copy(prop_1275_cell_t *from, prop_1275_cell_t *to, int32_t len)
{
	int i;
	for (i = 0; i < len; i++)
		*to = *from;
}

prop_1275_cell_t *
cells_1275_cmp(prop_1275_cell_t *cell1, prop_1275_cell_t *cell2, int32_t len)
{
	prop_1275_cell_t *match_cell = 0;
	int32_t i;

	for (i = 0; i < len; i++)
		if (cell1[i] != cell2[i]) {
			match_cell = &cell1[i];
			break;
		}

	return (match_cell);
}

/*
 * get_intr_parent() is a generic routine that process a 1275 interrupt
 * map (imap) property.  This function returns a dev_info_t structure
 * which claims ownership of the interrupt domain.
 * It also returns the new interrupt translation within this new domain.
 * If an interrupt-parent or interrupt-map property are not found,
 * then we fallback to using the device tree's parent.
 *
 * imap entry format:
 * <reg>,<interrupt>,<phandle>,<translated interrupt>
 * reg - The register specification in the interrupts domain
 * interrupt - The interrupt specification
 * phandle - PROM handle of the device that owns the xlated interrupt domain
 * translated interrupt - interrupt specifier in the parents domain
 * note: <reg>,<interrupt> - The reg and interrupt can be combined to create
 *	a unique entry called a unit interrupt specifier.
 *
 * Here's the processing steps:
 * step1 - If the interrupt-parent property exists, create the ispec and
 *	return the dip of the interrupt parent.
 * step2 - Extract the interrupt-map property and the interrupt-map-mask
 *	If these don't exist, just return the device tree parent.
 * step3 - build up the unit interrupt specifier to match against the
 *	interrupt map property
 * step4 - Scan the interrupt-map property until a match is found
 * step4a - Extract the interrupt parent
 * step4b - Compare the unit interrupt specifier
 */
dev_info_t *
get_intr_parent(dev_info_t *pdip, dev_info_t *dip, ddi_intr_handle_impl_t *hdlp)
{
	prop_1275_cell_t *imap, *imap_mask, *scan, *reg_p, *match_req;
	int32_t imap_sz, imap_cells, imap_scan_cells, imap_mask_sz,
	    addr_cells, intr_cells, reg_len, i, j;
	int32_t match_found = 0;
	dev_info_t *intr_parent_dip = NULL;
	uint32_t *intr = &hdlp->ih_vector;
	uint32_t nodeid;
#ifdef DEBUG
	static int debug = 0;
#endif

	/*
	 * step1
	 * If we have an interrupt-parent property, this property represents
	 * the nodeid of our interrupt parent.
	 */
	if ((nodeid = ddi_getprop(DDI_DEV_T_ANY, dip, 0,
	    "interrupt-parent", -1)) != -1) {
		intr_parent_dip = e_ddi_nodeid_to_dip(nodeid);
		ASSERT(intr_parent_dip);

		/*
		 * Attach the interrupt parent.
		 *
		 * N.B. e_ddi_nodeid_to_dip() isn't safe under DR.
		 *	Also, interrupt parent isn't held. This needs
		 *	to be revisited if DR-capable platforms implement
		 *	interrupt redirection.
		 */
		if (i_ddi_attach_node_hierarchy(intr_parent_dip)
		    != DDI_SUCCESS) {
			ndi_rele_devi(intr_parent_dip);
			return (NULL);
		}

		return (intr_parent_dip);
	}

	/*
	 * step2
	 * Get interrupt map structure from PROM property
	 */
	if (ddi_getlongprop(DDI_DEV_T_ANY, pdip, DDI_PROP_DONTPASS,
	    "interrupt-map", (caddr_t)&imap, &imap_sz)
	    != DDI_PROP_SUCCESS) {
		/*
		 * If we don't have an imap property, default to using the
		 * device tree.
		 */

		ndi_hold_devi(pdip);
		return (pdip);
	}

	/* Get the interrupt mask property */
	if (ddi_getlongprop(DDI_DEV_T_ANY, pdip, DDI_PROP_DONTPASS,
	    "interrupt-map-mask", (caddr_t)&imap_mask, &imap_mask_sz)
	    != DDI_PROP_SUCCESS) {
		/*
		 * If we don't find this property, we have to fail the request
		 * because the 1275 imap property wasn't defined correctly.
		 */
		ASSERT(intr_parent_dip == NULL);
		goto exit2;
	}

	/* Get the address cell size */
	addr_cells = ddi_getprop(DDI_DEV_T_ANY, pdip, 0,
	    "#address-cells", 2);

	/* Get the interrupts cell size */
	intr_cells = ddi_getprop(DDI_DEV_T_ANY, pdip, 0,
	    "#interrupt-cells", 1);

	/*
	 * step3
	 * Now lets build up the unit interrupt specifier e.g. reg,intr
	 * and apply the imap mask.  match_req will hold this when we're
	 * through.
	 */
	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "reg",
	    (caddr_t)&reg_p, &reg_len) != DDI_SUCCESS) {
		ASSERT(intr_parent_dip == NULL);
		goto exit3;
	}

	match_req = kmem_alloc(CELLS_1275_TO_BYTES(addr_cells) +
	    CELLS_1275_TO_BYTES(intr_cells), KM_SLEEP);

	for (i = 0; i < addr_cells; i++)
		match_req[i] = (reg_p[i] & imap_mask[i]);

	for (j = 0; j < intr_cells; i++, j++)
		match_req[i] = (intr[j] & imap_mask[i]);

	/* Calculate the imap size in cells */
	imap_cells = BYTES_TO_1275_CELLS(imap_sz);

#ifdef DEBUG
	if (debug)
		prom_printf("reg cell size 0x%x, intr cell size 0x%x, "
		    "match_request 0x%p, imap 0x%p\n", addr_cells, intr_cells,
		    match_req, imap);
#endif

	/*
	 * Scan the imap property looking for a match of the interrupt unit
	 * specifier.  This loop is rather complex since the data within the
	 * imap property may vary in size.
	 */
	for (scan = imap, imap_scan_cells = i = 0;
	    imap_scan_cells < imap_cells; scan += i, imap_scan_cells += i) {
		int new_intr_cells;

		/* Set the index to the nodeid field */
		i = addr_cells + intr_cells;

		/*
		 * step4a
		 * Translate the nodeid field to a dip
		 */
		ASSERT(intr_parent_dip == NULL);
		intr_parent_dip = e_ddi_nodeid_to_dip((uint_t)scan[i++]);

		ASSERT(intr_parent_dip != 0);
#ifdef DEBUG
		if (debug)
			prom_printf("scan 0x%p\n", scan);
#endif
		/*
		 * The tmp_dip describes the new domain, get it's interrupt
		 * cell size
		 */
		new_intr_cells = ddi_getprop(DDI_DEV_T_ANY, intr_parent_dip, 0,
		    "#interrupts-cells", 1);

		/*
		 * step4b
		 * See if we have a match on the interrupt unit specifier
		 */
		if (cells_1275_cmp(match_req, scan, addr_cells + intr_cells)
		    == 0) {
			uint32_t *intr;

			match_found = 1;

			/*
			 * If we have an imap parent whose not in our device
			 * tree path, we need to hold and install that driver.
			 */
			if (i_ddi_attach_node_hierarchy(intr_parent_dip)
			    != DDI_SUCCESS) {
				ndi_rele_devi(intr_parent_dip);
				intr_parent_dip = (dev_info_t *)NULL;
				goto exit4;
			}

			/*
			 * We need to handcraft an ispec along with a bus
			 * interrupt value, so we can dup it into our
			 * standard ispec structure.
			 */
			/* Extract the translated interrupt information */
			intr = kmem_alloc(
			    CELLS_1275_TO_BYTES(new_intr_cells), KM_SLEEP);

			for (j = 0; j < new_intr_cells; j++, i++)
				intr[j] = scan[i];

			cells_1275_copy(intr, &hdlp->ih_vector, new_intr_cells);

			kmem_free(intr, CELLS_1275_TO_BYTES(new_intr_cells));

#ifdef DEBUG
			if (debug)
				prom_printf("dip 0x%p\n", intr_parent_dip);
#endif
			break;
		} else {
#ifdef DEBUG
			if (debug)
				prom_printf("dip 0x%p\n", intr_parent_dip);
#endif
			ndi_rele_devi(intr_parent_dip);
			intr_parent_dip = NULL;
			i += new_intr_cells;
		}
	}

	/*
	 * If we haven't found our interrupt parent at this point, fallback
	 * to using the device tree.
	 */
	if (!match_found) {
		ndi_hold_devi(pdip);
		ASSERT(intr_parent_dip == NULL);
		intr_parent_dip = pdip;
	}

	ASSERT(intr_parent_dip != NULL);

exit4:
	kmem_free(reg_p, reg_len);
	kmem_free(match_req, CELLS_1275_TO_BYTES(addr_cells) +
	    CELLS_1275_TO_BYTES(intr_cells));

exit3:
	kmem_free(imap_mask, imap_mask_sz);

exit2:
	kmem_free(imap, imap_sz);

	return (intr_parent_dip);
}

/*
 * process_intr_ops:
 *
 * Process the interrupt op via the interrupt parent.
 */
int
process_intr_ops(dev_info_t *pdip, dev_info_t *rdip, ddi_intr_op_t op,
    ddi_intr_handle_impl_t *hdlp, void *result)
{
	int		ret = DDI_FAILURE;

	if (NEXUS_HAS_INTR_OP(pdip)) {
		ret = (*(DEVI(pdip)->devi_ops->devo_bus_ops->
		    bus_intr_op)) (pdip, rdip, op, hdlp, result);
	} else {
		cmn_err(CE_WARN, "Failed to process interrupt "
		    "for %s%d due to down-rev nexus driver %s%d",
		    ddi_get_name(rdip), ddi_get_instance(rdip),
		    ddi_get_name(pdip), ddi_get_instance(pdip));
	}

	return (ret);
}

/*ARGSUSED*/
uint_t
softlevel1(caddr_t arg)
{
	softint();
	return (1);
}

/*
 * indirection table, to save us some large switch statements
 * NOTE: This must agree with "INTLEVEL_foo" constants in
 *	<sys/avintr.h>
 */
struct autovec *const vectorlist[] = { 0 };

/*
 * This value is exported here for the functions in avintr.c
 */
const uint_t maxautovec = (sizeof (vectorlist) / sizeof (vectorlist[0]));

/*
 * Check for machine specific interrupt levels which cannot be reassigned by
 * settrap(), sun4u version.
 *
 * sun4u does not support V8 SPARC "fast trap" handlers.
 */
/*ARGSUSED*/
int
exclude_settrap(int lvl)
{
	return (1);
}

/*
 * Check for machine specific interrupt levels which cannot have interrupt
 * handlers added. We allow levels 1 through 15; level 0 is nonsense.
 */
/*ARGSUSED*/
int
exclude_level(int lvl)
{
	return ((lvl < 1) || (lvl > 15));
}

/*
 * Wrapper functions used by New DDI interrupt framework.
 */

/*
 * i_ddi_intr_ops:
 */
int
i_ddi_intr_ops(dev_info_t *dip, dev_info_t *rdip, ddi_intr_op_t op,
    ddi_intr_handle_impl_t *hdlp, void *result)
{
	dev_info_t	*pdip = ddi_get_parent(dip);
	int		ret = DDI_FAILURE;

	/*
	 * The following check is required to address
	 * one of the test case of ADDI test suite.
	 */
	if (pdip == NULL)
		return (DDI_FAILURE);

	if (hdlp->ih_type != DDI_INTR_TYPE_FIXED)
		return (process_intr_ops(pdip, rdip, op, hdlp, result));

	if (hdlp->ih_vector == 0)
		hdlp->ih_vector = i_ddi_get_inum(rdip, hdlp->ih_inum);

	if (hdlp->ih_pri == 0)
		hdlp->ih_pri = i_ddi_get_intr_pri(rdip, hdlp->ih_inum);

	switch (op) {
	case DDI_INTROP_ADDISR:
	case DDI_INTROP_REMISR:
	case DDI_INTROP_ENABLE:
	case DDI_INTROP_DISABLE:
	case DDI_INTROP_BLOCKENABLE:
	case DDI_INTROP_BLOCKDISABLE:
		/*
		 * Try and determine our parent and possibly an interrupt
		 * translation. intr parent dip returned held
		 */
		if ((pdip = get_intr_parent(pdip, dip, hdlp)) == NULL)
			goto done;
	}

	ret = process_intr_ops(pdip, rdip, op, hdlp, result);

done:
	switch (op) {
	case DDI_INTROP_ADDISR:
	case DDI_INTROP_REMISR:
	case DDI_INTROP_ENABLE:
	case DDI_INTROP_DISABLE:
	case DDI_INTROP_BLOCKENABLE:
	case DDI_INTROP_BLOCKDISABLE:
		/* Release hold acquired in get_intr_parent() */
		if (pdip)
			ndi_rele_devi(pdip);
	}

	hdlp->ih_vector = 0;

	return (ret);
}

/*
 * i_ddi_add_ivintr:
 */
/*ARGSUSED*/
int
i_ddi_add_ivintr(ddi_intr_handle_impl_t *hdlp)
{
	/* Sanity check the entry we're about to add */
	if (GET_IVINTR(hdlp->ih_vector)) {
		cmn_err(CE_WARN, "mondo 0x%x in use", hdlp->ih_vector);
		return (DDI_FAILURE);
	}

	/*
	 * If the PIL was set and is valid use it, otherwise
	 * default it to 1
	 */
	if ((hdlp->ih_pri < 1) || (hdlp->ih_pri > PIL_MAX))
		hdlp->ih_pri = 1;

	VERIFY(add_ivintr(hdlp->ih_vector, hdlp->ih_pri,
	    (intrfunc)hdlp->ih_cb_func, hdlp->ih_cb_arg1, NULL) == 0);

	return (DDI_SUCCESS);
}

/*
 * i_ddi_rem_ivintr:
 */
/*ARGSUSED*/
void
i_ddi_rem_ivintr(ddi_intr_handle_impl_t *hdlp)
{
	rem_ivintr(hdlp->ih_vector, NULL);
}

/*
 * i_ddi_get_inum - Get the interrupt number property from the
 * specified device. Note that this function is called only for
 * the FIXED interrupt type.
 */
uint32_t
i_ddi_get_inum(dev_info_t *dip, uint_t inumber)
{
	int32_t			intrlen, intr_cells, max_intrs;
	prop_1275_cell_t	*ip, intr_sz;
	uint32_t		intr = 0;

	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS |
	    DDI_PROP_CANSLEEP,
	    "interrupts", (caddr_t)&ip, &intrlen) == DDI_SUCCESS) {

		intr_cells = ddi_getprop(DDI_DEV_T_ANY, dip, 0,
		    "#interrupt-cells", 1);

		/* adjust for number of bytes */
		intr_sz = CELLS_1275_TO_BYTES(intr_cells);

		/* Calculate the number of interrupts */
		max_intrs = intrlen / intr_sz;

		if (inumber < max_intrs) {
			prop_1275_cell_t *intrp = ip;

			/* Index into interrupt property */
			intrp += (inumber * intr_cells);

			cells_1275_copy(intrp, &intr, intr_cells);
		}

		kmem_free(ip, intrlen);
	}

	return (intr);
}

/*
 * i_ddi_get_intr_pri - Get the interrupt-priorities property from
 * the specified device. Note that this function is called only for
 * the FIXED interrupt type.
 */
uint32_t
i_ddi_get_intr_pri(dev_info_t *dip, uint_t inumber)
{
	uint32_t	*intr_prio_p;
	uint32_t	pri = 0;
	int32_t		i;

	/*
	 * Use the "interrupt-priorities" property to determine the
	 * the pil/ipl for the interrupt handler.
	 */
	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
	    "interrupt-priorities", (caddr_t)&intr_prio_p,
	    &i) == DDI_SUCCESS) {
		if (inumber < (i / sizeof (int32_t)))
			pri = intr_prio_p[inumber];
		kmem_free(intr_prio_p, i);
	}

	return (pri);
}

int
i_ddi_get_nintrs(dev_info_t *dip)
{
	int32_t intrlen;
	prop_1275_cell_t intr_sz;
	prop_1275_cell_t *ip;
	int32_t ret = 0;

	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS |
	    DDI_PROP_CANSLEEP,
	    "interrupts", (caddr_t)&ip, &intrlen) == DDI_SUCCESS) {

		intr_sz = ddi_getprop(DDI_DEV_T_ANY, dip, 0,
		    "#interrupt-cells", 1);
		/* adjust for number of bytes */
		intr_sz = CELLS_1275_TO_BYTES(intr_sz);

		ret = intrlen / intr_sz;

		kmem_free(ip, intrlen);
	}

	return (ret);
}

/*
 * i_ddi_add_softint - allocate and add a soft interrupt to the system
 */
int
i_ddi_add_softint(ddi_softint_hdl_impl_t *hdlp)
{
	uint_t		rval;

	if ((rval = add_softintr(hdlp->ih_pri, hdlp->ih_cb_func,
	    hdlp->ih_cb_arg1)) == 0) {

		return (DDI_FAILURE);
	}

	/* use uintptr_t to suppress the gcc warning */
	hdlp->ih_private = (void *)(uintptr_t)rval;

	return (DDI_SUCCESS);
}

void
i_ddi_remove_softint(ddi_softint_hdl_impl_t *hdlp)
{
	uint_t		intr_id;

	/* disable */
	ASSERT(hdlp->ih_private != NULL);

	/* use uintptr_t to suppress the gcc warning */
	intr_id = (uint_t)(uintptr_t)hdlp->ih_private;

	rem_softintr(intr_id);
	hdlp->ih_private = NULL;
}

int
i_ddi_trigger_softint(ddi_softint_hdl_impl_t *hdlp, void *arg2)
{
	uint_t		intr_id;
	int		ret;

	ASSERT(hdlp != NULL);
	ASSERT(hdlp->ih_private != NULL);

	intr_id = (uint_t)hdlp->ih_private;

	/* update the vector table for the 2nd arg */
	ret = update_softint_arg2(intr_id, arg2);
	if (ret == DDI_SUCCESS)
		setsoftint(intr_id);

	return (ret);
}

/* ARGSUSED */
int
i_ddi_set_softint_pri(ddi_softint_hdl_impl_t *hdlp, uint_t old_pri)
{
	uint_t		intr_id;
	int		ret;

	ASSERT(hdlp != NULL);
	ASSERT(hdlp->ih_private != NULL);

	intr_id = (uint_t)hdlp->ih_private;

	/* update the vector table for the new priority */
	ret = update_softint_pri(intr_id, hdlp->ih_pri);

	return (ret);
}

/*ARGSUSED*/
void
i_ddi_alloc_intr_phdl(ddi_intr_handle_impl_t *hdlp)
{
}

/*ARGSUSED*/
void
i_ddi_free_intr_phdl(ddi_intr_handle_impl_t *hdlp)
{
}

/*
 * SECTION: DDI Memory/DMA
 */

static vmem_t *little_endian_arena;
static vmem_t *big_endian_arena;

static void *
segkmem_alloc_le(vmem_t *vmp, size_t size, int flag)
{
	return (segkmem_xalloc(vmp, NULL, size, flag, HAT_STRUCTURE_LE,
	    segkmem_page_create, NULL));
}

static void *
segkmem_alloc_be(vmem_t *vmp, size_t size, int flag)
{
	return (segkmem_xalloc(vmp, NULL, size, flag, HAT_STRUCTURE_BE,
	    segkmem_page_create, NULL));
}

void
ka_init(void)
{
	little_endian_arena = vmem_create("little_endian", NULL, 0, 1,
	    segkmem_alloc_le, segkmem_free, heap_arena, 0, VM_SLEEP);
	big_endian_arena = vmem_create("big_endian", NULL, 0, 1,
	    segkmem_alloc_be, segkmem_free, heap_arena, 0, VM_SLEEP);
}

/*
 * Allocate from the system, aligned on a specific boundary.
 * The alignment, if non-zero, must be a power of 2.
 */
static void *
kalloca(size_t size, size_t align, int cansleep, uint_t endian_flags)
{
	size_t *addr, *raddr, rsize;
	size_t hdrsize = 4 * sizeof (size_t);	/* must be power of 2 */

	align = MAX(align, hdrsize);
	ASSERT((align & (align - 1)) == 0);

	/*
	 * We need to allocate
	 *    rsize = size + hdrsize + align - MIN(hdrsize, buffer_alignment)
	 * bytes to be sure we have enough freedom to satisfy the request.
	 * Since the buffer alignment depends on the request size, this is
	 * not straightforward to use directly.
	 *
	 * kmem guarantees that any allocation of a 64-byte multiple will be
	 * 64-byte aligned.  Since rounding up the request could add more
	 * than we save, we compute the size with and without alignment, and
	 * use the smaller of the two.
	 */
	rsize = size + hdrsize + align;

	if (endian_flags == DDI_STRUCTURE_LE_ACC) {
		raddr = vmem_alloc(little_endian_arena, rsize,
		    cansleep ? VM_SLEEP : VM_NOSLEEP);
	} else {
		raddr = vmem_alloc(big_endian_arena, rsize,
		    cansleep ? VM_SLEEP : VM_NOSLEEP);
	}

	if (raddr == NULL)
		return (NULL);

	addr = (size_t *)P2ROUNDUP((uintptr_t)raddr + hdrsize, align);
	ASSERT((uintptr_t)addr + size - (uintptr_t)raddr <= rsize);

	addr[-3] = (size_t)endian_flags;
	addr[-2] = (size_t)raddr;
	addr[-1] = rsize;

	return (addr);
}

static void
kfreea(void *addr)
{
	size_t *saddr = addr;

	if (saddr[-3] == DDI_STRUCTURE_LE_ACC)
		vmem_free(little_endian_arena, (void *)saddr[-2], saddr[-1]);
	else
		vmem_free(big_endian_arena, (void *)saddr[-2], saddr[-1]);
}

int
i_ddi_mem_alloc(dev_info_t *dip, ddi_dma_attr_t *attr,
    size_t length, int cansleep, int streaming,
    ddi_device_acc_attr_t *accattrp,
    caddr_t *kaddrp, size_t *real_length, ddi_acc_hdl_t *handlep)
{
	caddr_t a;
	int iomin, align;
	uint_t endian_flags = DDI_NEVERSWAP_ACC;

#if defined(lint)
	*handlep = *handlep;
#endif

	/*
	 * Check legality of arguments
	 */
	if (length == 0 || kaddrp == NULL || attr == NULL) {
		return (DDI_FAILURE);
	}
	if (attr->dma_attr_minxfer == 0 || attr->dma_attr_align == 0 ||
	    (attr->dma_attr_align & (attr->dma_attr_align - 1)) ||
	    (attr->dma_attr_minxfer & (attr->dma_attr_minxfer - 1))) {
		return (DDI_FAILURE);
	}

	/*
	 * Drivers for 64-bit capable SBus devices will encode
	 * the burtsizes for 64-bit xfers in the upper 16-bits.
	 * For DMA alignment, we use the most restrictive
	 * alignment of 32-bit and 64-bit xfers.
	 */
	iomin = (attr->dma_attr_burstsizes & 0xffff) |
	    ((attr->dma_attr_burstsizes >> 16) & 0xffff);
	/*
	 * If a driver set burtsizes to 0, we give him byte alignment.
	 * Otherwise align at the burtsizes boundary.
	 */
	if (iomin == 0)
		iomin = 1;
	else
		iomin = 1 << (ddi_fls(iomin) - 1);
	iomin = maxbit(iomin, attr->dma_attr_minxfer);
	iomin = maxbit(iomin, attr->dma_attr_align);
	iomin = ddi_iomin(dip, iomin, streaming);
	if (iomin == 0)
		return (DDI_FAILURE);

	ASSERT((iomin & (iomin - 1)) == 0);
	ASSERT(iomin >= attr->dma_attr_minxfer);
	ASSERT(iomin >= attr->dma_attr_align);

	length = P2ROUNDUP(length, iomin);
	align = iomin;

	if (accattrp != NULL)
		endian_flags = accattrp->devacc_attr_endian_flags;

	a = kalloca(length, align, cansleep, endian_flags);
	if ((*kaddrp = a) == 0) {
		return (DDI_FAILURE);
	} else {
		if (real_length) {
			*real_length = length;
		}
		if (handlep) {
			/*
			 * assign handle information
			 */
			impl_acc_hdl_init(handlep);
		}
		return (DDI_SUCCESS);
	}
}

/*
 * covert old DMA limits structure to DMA attribute structure
 * and continue
 */
int
i_ddi_mem_alloc_lim(dev_info_t *dip, ddi_dma_lim_t *limits,
    size_t length, int cansleep, int streaming,
    ddi_device_acc_attr_t *accattrp, caddr_t *kaddrp,
    uint_t *real_length, ddi_acc_hdl_t *ap)
{
	ddi_dma_attr_t dma_attr, *attrp;
	size_t rlen;
	int ret;

	ASSERT(limits);
	attrp = &dma_attr;
	attrp->dma_attr_version = DMA_ATTR_V0;
	attrp->dma_attr_addr_lo = (uint64_t)limits->dlim_addr_lo;
	attrp->dma_attr_addr_hi = (uint64_t)limits->dlim_addr_hi;
	attrp->dma_attr_count_max = (uint64_t)-1;
	attrp->dma_attr_align = 1;
	attrp->dma_attr_burstsizes = (uint_t)limits->dlim_burstsizes;
	attrp->dma_attr_minxfer = (uint32_t)limits->dlim_minxfer;
	attrp->dma_attr_maxxfer = (uint64_t)-1;
	attrp->dma_attr_seg = (uint64_t)limits->dlim_cntr_max;
	attrp->dma_attr_sgllen = 1;
	attrp->dma_attr_granular = 1;
	attrp->dma_attr_flags = 0;

	ret = i_ddi_mem_alloc(dip, attrp, length, cansleep, streaming,
	    accattrp, kaddrp, &rlen, ap);
	if (ret == DDI_SUCCESS) {
		if (real_length)
			*real_length = (uint_t)rlen;
	}
	return (ret);
}

/* ARGSUSED */
void
i_ddi_mem_free(caddr_t kaddr, int stream)
{
	kfreea(kaddr);
}

/*
 * SECTION: DDI Data Access
 */

static uintptr_t impl_acc_hdl_id = 0;

/*
 * access handle allocator
 */
ddi_acc_hdl_t *
impl_acc_hdl_get(ddi_acc_handle_t hdl)
{
	/*
	 * Extract the access handle address from the DDI implemented
	 * access handle
	 */
	return (&((ddi_acc_impl_t *)hdl)->ahi_common);
}

ddi_acc_handle_t
impl_acc_hdl_alloc(int (*waitfp)(caddr_t), caddr_t arg)
{
	ddi_acc_impl_t *hp;
	on_trap_data_t *otp;
	int sleepflag;

	sleepflag = ((waitfp == (int (*)())KM_SLEEP) ? KM_SLEEP : KM_NOSLEEP);

	/*
	 * Allocate and initialize the data access handle and error status.
	 */
	if ((hp = kmem_zalloc(sizeof (ddi_acc_impl_t), sleepflag)) == NULL)
		goto fail;
	if ((hp->ahi_err = (ndi_err_t *)kmem_zalloc(
	    sizeof (ndi_err_t), sleepflag)) == NULL) {
		kmem_free(hp, sizeof (ddi_acc_impl_t));
		goto fail;
	}
	if ((otp = (on_trap_data_t *)kmem_zalloc(
	    sizeof (on_trap_data_t), sleepflag)) == NULL) {
		kmem_free(hp->ahi_err, sizeof (ndi_err_t));
		kmem_free(hp, sizeof (ddi_acc_impl_t));
		goto fail;
	}
	hp->ahi_err->err_ontrap = otp;
	hp->ahi_common.ah_platform_private = (void *)hp;

	return ((ddi_acc_handle_t)hp);
fail:
	if ((waitfp != (int (*)())KM_SLEEP) &&
	    (waitfp != (int (*)())KM_NOSLEEP))
		ddi_set_callback(waitfp, arg, &impl_acc_hdl_id);
	return (NULL);
}

void
impl_acc_hdl_free(ddi_acc_handle_t handle)
{
	ddi_acc_impl_t *hp;

	/*
	 * The supplied (ddi_acc_handle_t) is actually a (ddi_acc_impl_t *),
	 * because that's what we allocated in impl_acc_hdl_alloc() above.
	 */
	hp = (ddi_acc_impl_t *)handle;
	if (hp) {
		kmem_free(hp->ahi_err->err_ontrap, sizeof (on_trap_data_t));
		kmem_free(hp->ahi_err, sizeof (ndi_err_t));
		kmem_free(hp, sizeof (ddi_acc_impl_t));
		if (impl_acc_hdl_id)
			ddi_run_callback(&impl_acc_hdl_id);
	}
}

void
impl_acc_err_init(ddi_acc_hdl_t *handlep)
{
	int fmcap;
	ndi_err_t *errp;
	on_trap_data_t *otp;
	ddi_acc_impl_t *hp = (ddi_acc_impl_t *)handlep;

	fmcap = ddi_fm_capable(handlep->ah_dip);

	if (handlep->ah_acc.devacc_attr_version < DDI_DEVICE_ATTR_V1 ||
	    !DDI_FM_ACC_ERR_CAP(fmcap)) {
		handlep->ah_acc.devacc_attr_access = DDI_DEFAULT_ACC;
	} else if (DDI_FM_ACC_ERR_CAP(fmcap)) {
		if (handlep->ah_acc.devacc_attr_access == DDI_DEFAULT_ACC) {
			i_ddi_drv_ereport_post(handlep->ah_dip, DVR_EFMCAP,
			    NULL, DDI_NOSLEEP);
		} else {
			errp = hp->ahi_err;
			otp = (on_trap_data_t *)errp->err_ontrap;
			otp->ot_handle = (void *)(hp);
			otp->ot_prot = OT_DATA_ACCESS;
			if (handlep->ah_acc.devacc_attr_access ==
			    DDI_CAUTIOUS_ACC)
				otp->ot_trampoline =
				    (uintptr_t)&i_ddi_caut_trampoline;
			else
				otp->ot_trampoline =
				    (uintptr_t)&i_ddi_prot_trampoline;
			errp->err_status = DDI_FM_OK;
			errp->err_expected = DDI_FM_ERR_UNEXPECTED;
		}
	}
}

void
impl_acc_hdl_init(ddi_acc_hdl_t *handlep)
{
	ddi_acc_impl_t *hp;

	ASSERT(handlep);

	hp = (ddi_acc_impl_t *)handlep;

	/*
	 * check for SW byte-swapping
	 */
	hp->ahi_get8 = i_ddi_get8;
	hp->ahi_put8 = i_ddi_put8;
	hp->ahi_rep_get8 = i_ddi_rep_get8;
	hp->ahi_rep_put8 = i_ddi_rep_put8;
	if (handlep->ah_acc.devacc_attr_endian_flags & DDI_STRUCTURE_LE_ACC) {
		hp->ahi_get16 = i_ddi_swap_get16;
		hp->ahi_get32 = i_ddi_swap_get32;
		hp->ahi_get64 = i_ddi_swap_get64;
		hp->ahi_put16 = i_ddi_swap_put16;
		hp->ahi_put32 = i_ddi_swap_put32;
		hp->ahi_put64 = i_ddi_swap_put64;
		hp->ahi_rep_get16 = i_ddi_swap_rep_get16;
		hp->ahi_rep_get32 = i_ddi_swap_rep_get32;
		hp->ahi_rep_get64 = i_ddi_swap_rep_get64;
		hp->ahi_rep_put16 = i_ddi_swap_rep_put16;
		hp->ahi_rep_put32 = i_ddi_swap_rep_put32;
		hp->ahi_rep_put64 = i_ddi_swap_rep_put64;
	} else {
		hp->ahi_get16 = i_ddi_get16;
		hp->ahi_get32 = i_ddi_get32;
		hp->ahi_get64 = i_ddi_get64;
		hp->ahi_put16 = i_ddi_put16;
		hp->ahi_put32 = i_ddi_put32;
		hp->ahi_put64 = i_ddi_put64;
		hp->ahi_rep_get16 = i_ddi_rep_get16;
		hp->ahi_rep_get32 = i_ddi_rep_get32;
		hp->ahi_rep_get64 = i_ddi_rep_get64;
		hp->ahi_rep_put16 = i_ddi_rep_put16;
		hp->ahi_rep_put32 = i_ddi_rep_put32;
		hp->ahi_rep_put64 = i_ddi_rep_put64;
	}

	/* Legacy fault flags and support */
	hp->ahi_fault_check = i_ddi_acc_fault_check;
	hp->ahi_fault_notify = i_ddi_acc_fault_notify;
	hp->ahi_fault = 0;
	impl_acc_err_init(handlep);
}

void
i_ddi_acc_set_fault(ddi_acc_handle_t handle)
{
	ddi_acc_impl_t *hp = (ddi_acc_impl_t *)handle;

	if (!hp->ahi_fault) {
		hp->ahi_fault = 1;
			(*hp->ahi_fault_notify)(hp);
	}
}

void
i_ddi_acc_clr_fault(ddi_acc_handle_t handle)
{
	ddi_acc_impl_t *hp = (ddi_acc_impl_t *)handle;

	if (hp->ahi_fault) {
		hp->ahi_fault = 0;
			(*hp->ahi_fault_notify)(hp);
	}
}

/* ARGSUSED */
void
i_ddi_acc_fault_notify(ddi_acc_impl_t *hp)
{
	/* Default version, does nothing */
}

/*
 * SECTION: Misc functions
 */

/*
 * instance wrappers
 */
/*ARGSUSED*/
uint_t
impl_assign_instance(dev_info_t *dip)
{
	return ((uint_t)-1);
}

/*ARGSUSED*/
int
impl_keep_instance(dev_info_t *dip)
{
	return (DDI_FAILURE);
}

/*ARGSUSED*/
int
impl_free_instance(dev_info_t *dip)
{
	return (DDI_FAILURE);
}

/*ARGSUSED*/
int
impl_check_cpu(dev_info_t *devi)
{
	return (DDI_SUCCESS);
}


static const char *nocopydevs[] = {
	"SUNW,ffb",
	"SUNW,afb",
	NULL
};

/*
 * Perform a copy from a memory mapped device (whose devinfo pointer is devi)
 * separately mapped at devaddr in the kernel to a kernel buffer at kaddr.
 */
/*ARGSUSED*/
int
e_ddi_copyfromdev(dev_info_t *devi,
    off_t off, const void *devaddr, void *kaddr, size_t len)
{
	const char **argv;

	for (argv = nocopydevs; *argv; argv++)
		if (strcmp(ddi_binding_name(devi), *argv) == 0) {
			bzero(kaddr, len);
			return (0);
		}

	bcopy(devaddr, kaddr, len);
	return (0);
}

/*
 * Perform a copy to a memory mapped device (whose devinfo pointer is devi)
 * separately mapped at devaddr in the kernel from a kernel buffer at kaddr.
 */
/*ARGSUSED*/
int
e_ddi_copytodev(dev_info_t *devi,
    off_t off, const void *kaddr, void *devaddr, size_t len)
{
	const char **argv;

	for (argv = nocopydevs; *argv; argv++)
		if (strcmp(ddi_binding_name(devi), *argv) == 0)
			return (1);

	bcopy(kaddr, devaddr, len);
	return (0);
}

/*
 * Boot Configuration
 */
idprom_t idprom;

/*
 * Configure the hardware on the system.
 * Called before the rootfs is mounted
 */
void
configure(void)
{
	extern void i_ddi_init_root();

	/* We better have released boot by this time! */
	ASSERT(!bootops);

	/*
	 * Determine whether or not to use the fpu, V9 SPARC cpus
	 * always have one. Could check for existence of a fp queue,
	 * Ultra I, II and IIa do not have a fp queue.
	 */
	if (fpu_exists)
		fpu_probe();
	else
		cmn_err(CE_CONT, "FPU not in use\n");

#if 0 /* XXXQ - not necessary for sun4u */
	/*
	 * This following line fixes bugid 1041296; we need to do a
	 * prom_nextnode(0) because this call ALSO patches the DMA+
	 * bug in Campus-B and Phoenix. The prom uncaches the traptable
	 * page as a side-effect of devr_next(0) (which prom_nextnode calls),
	 * so this *must* be executed early on. (XXX This is untrue for sun4u)
	 */
	(void) prom_nextnode((pnode_t)0);
#endif

	/*
	 * Initialize devices on the machine.
	 * Uses configuration tree built by the PROMs to determine what
	 * is present, and builds a tree of prototype dev_info nodes
	 * corresponding to the hardware which identified itself.
	 */
	i_ddi_init_root();

#ifdef	DDI_PROP_DEBUG
	(void) ddi_prop_debug(1);	/* Enable property debugging */
#endif	/* DDI_PROP_DEBUG */
}

/*
 * The "status" property indicates the operational status of a device.
 * If this property is present, the value is a string indicating the
 * status of the device as follows:
 *
 *	"okay"		operational.
 *	"disabled"	not operational, but might become operational.
 *	"fail"		not operational because a fault has been detected,
 *			and it is unlikely that the device will become
 *			operational without repair. no additional details
 *			are available.
 *	"fail-xxx"	not operational because a fault has been detected,
 *			and it is unlikely that the device will become
 *			operational without repair. "xxx" is additional
 *			human-readable information about the particular
 *			fault condition that was detected.
 *
 * The absence of this property means that the operational status is
 * unknown or okay.
 *
 * This routine checks the status property of the specified device node
 * and returns 0 if the operational status indicates failure, and 1 otherwise.
 *
 * The property may exist on plug-in cards the existed before IEEE 1275-1994.
 * And, in that case, the property may not even be a string. So we carefully
 * check for the value "fail", in the beginning of the string, noting
 * the property length.
 */
int
status_okay(int id, char *buf, int buflen)
{
	char status_buf[OBP_MAXPROPNAME];
	char *bufp = buf;
	int len = buflen;
	int proplen;
	static const char *status = "status";
	static const char *fail = "fail";
	size_t fail_len = strlen(fail);

	/*
	 * Get the proplen ... if it's smaller than "fail",
	 * or doesn't exist ... then we don't care, since
	 * the value can't begin with the char string "fail".
	 *
	 * NB: proplen, if it's a string, includes the NULL in the
	 * the size of the property, and fail_len does not.
	 */
	proplen = prom_getproplen((pnode_t)id, (caddr_t)status);
	if (proplen <= fail_len)	/* nonexistent or uninteresting len */
		return (1);

	/*
	 * if a buffer was provided, use it
	 */
	if ((buf == (char *)NULL) || (buflen <= 0)) {
		bufp = status_buf;
		len = sizeof (status_buf);
	}
	*bufp = (char)0;

	/*
	 * Get the property into the buffer, to the extent of the buffer,
	 * and in case the buffer is smaller than the property size,
	 * NULL terminate the buffer. (This handles the case where
	 * a buffer was passed in and the caller wants to print the
	 * value, but the buffer was too small).
	 */
	(void) prom_bounded_getprop((pnode_t)id, (caddr_t)status,
	    (caddr_t)bufp, len);
	*(bufp + len - 1) = (char)0;

	/*
	 * If the value begins with the char string "fail",
	 * then it means the node is failed. We don't care
	 * about any other values. We assume the node is ok
	 * although it might be 'disabled'.
	 */
	if (strncmp(bufp, fail, fail_len) == 0)
		return (0);

	return (1);
}


/*
 * We set the cpu type from the idprom, if we can.
 * Note that we just read out the contents of it, for the most part.
 */
void
setcputype(void)
{
	/*
	 * We cache the idprom info early on so that we don't
	 * rummage through the NVRAM unnecessarily later.
	 */
	(void) prom_getidprom((caddr_t)&idprom, sizeof (idprom));
}

/*
 *  Here is where we actually infer meanings to the members of idprom_t
 */
void
parse_idprom(void)
{
	if (idprom.id_format == IDFORM_1) {
		uint_t i;

		(void) localetheraddr((struct ether_addr *)idprom.id_ether,
		    (struct ether_addr *)NULL);

		i = idprom.id_machine << 24;
		i = i + idprom.id_serial;
		numtos((ulong_t)i, hw_serial);
	} else
		prom_printf("Invalid format code in IDprom.\n");
}

/*
 * Allow for implementation specific correction of PROM property values.
 */
/*ARGSUSED*/
void
impl_fix_props(dev_info_t *dip, dev_info_t *ch_dip, char *name, int len,
    caddr_t buffer)
{
	/*
	 * There are no adjustments needed in this implementation.
	 */
}

/*
 * The following functions ready a cautious request to go up to the nexus
 * driver.  It is up to the nexus driver to decide how to process the request.
 * It may choose to call i_ddi_do_caut_get/put in this file, or do it
 * differently.
 */

static void
i_ddi_caut_getput_ctlops(
    ddi_acc_impl_t *hp, uint64_t host_addr, uint64_t dev_addr, size_t size,
    size_t repcount, uint_t flags, ddi_ctl_enum_t cmd)
{
	peekpoke_ctlops_t	cautacc_ctlops_arg;

	cautacc_ctlops_arg.size = size;
	cautacc_ctlops_arg.dev_addr = dev_addr;
	cautacc_ctlops_arg.host_addr = host_addr;
	cautacc_ctlops_arg.handle = (ddi_acc_handle_t)hp;
	cautacc_ctlops_arg.repcount = repcount;
	cautacc_ctlops_arg.flags = flags;

	(void) ddi_ctlops(hp->ahi_common.ah_dip, hp->ahi_common.ah_dip, cmd,
	    &cautacc_ctlops_arg, NULL);
}

uint8_t
i_ddi_caut_get8(ddi_acc_impl_t *hp, uint8_t *addr)
{
	uint8_t value;
	i_ddi_caut_getput_ctlops(hp, (uint64_t)&value, (uint64_t)addr,
	    sizeof (uint8_t), 1, 0, DDI_CTLOPS_PEEK);

	return (value);
}

uint16_t
i_ddi_caut_get16(ddi_acc_impl_t *hp, uint16_t *addr)
{
	uint16_t value;
	i_ddi_caut_getput_ctlops(hp, (uint64_t)&value, (uint64_t)addr,
	    sizeof (uint16_t), 1, 0, DDI_CTLOPS_PEEK);

	return (value);
}

uint32_t
i_ddi_caut_get32(ddi_acc_impl_t *hp, uint32_t *addr)
{
	uint32_t value;
	i_ddi_caut_getput_ctlops(hp, (uint64_t)&value, (uint64_t)addr,
	    sizeof (uint32_t), 1, 0, DDI_CTLOPS_PEEK);

	return (value);
}

uint64_t
i_ddi_caut_get64(ddi_acc_impl_t *hp, uint64_t *addr)
{
	uint64_t value;
	i_ddi_caut_getput_ctlops(hp, (uint64_t)&value, (uint64_t)addr,
	    sizeof (uint64_t), 1, 0, DDI_CTLOPS_PEEK);

	return (value);
}

void
i_ddi_caut_put8(ddi_acc_impl_t *hp, uint8_t *addr, uint8_t value)
{
	i_ddi_caut_getput_ctlops(hp, (uint64_t)&value, (uint64_t)addr,
	    sizeof (uint8_t), 1, 0, DDI_CTLOPS_POKE);
}

void
i_ddi_caut_put16(ddi_acc_impl_t *hp, uint16_t *addr, uint16_t value)
{
	i_ddi_caut_getput_ctlops(hp, (uint64_t)&value, (uint64_t)addr,
	    sizeof (uint16_t), 1, 0, DDI_CTLOPS_POKE);
}

void
i_ddi_caut_put32(ddi_acc_impl_t *hp, uint32_t *addr, uint32_t value)
{
	i_ddi_caut_getput_ctlops(hp, (uint64_t)&value, (uint64_t)addr,
	    sizeof (uint32_t), 1, 0, DDI_CTLOPS_POKE);
}

void
i_ddi_caut_put64(ddi_acc_impl_t *hp, uint64_t *addr, uint64_t value)
{
	i_ddi_caut_getput_ctlops(hp, (uint64_t)&value, (uint64_t)addr,
	    sizeof (uint64_t), 1, 0, DDI_CTLOPS_POKE);
}

void
i_ddi_caut_rep_get8(ddi_acc_impl_t *hp, uint8_t *host_addr, uint8_t *dev_addr,
	size_t repcount, uint_t flags)
{
	i_ddi_caut_getput_ctlops(hp, (uint64_t)host_addr, (uint64_t)dev_addr,
	    sizeof (uint8_t), repcount, flags, DDI_CTLOPS_PEEK);
}

void
i_ddi_caut_rep_get16(ddi_acc_impl_t *hp, uint16_t *host_addr,
    uint16_t *dev_addr, size_t repcount, uint_t flags)
{
	i_ddi_caut_getput_ctlops(hp, (uint64_t)host_addr, (uint64_t)dev_addr,
	    sizeof (uint16_t), repcount, flags, DDI_CTLOPS_PEEK);
}

void
i_ddi_caut_rep_get32(ddi_acc_impl_t *hp, uint32_t *host_addr,
    uint32_t *dev_addr, size_t repcount, uint_t flags)
{
	i_ddi_caut_getput_ctlops(hp, (uint64_t)host_addr, (uint64_t)dev_addr,
	    sizeof (uint32_t), repcount, flags, DDI_CTLOPS_PEEK);
}

void
i_ddi_caut_rep_get64(ddi_acc_impl_t *hp, uint64_t *host_addr,
    uint64_t *dev_addr, size_t repcount, uint_t flags)
{
	i_ddi_caut_getput_ctlops(hp, (uint64_t)host_addr, (uint64_t)dev_addr,
	    sizeof (uint64_t), repcount, flags, DDI_CTLOPS_PEEK);
}

void
i_ddi_caut_rep_put8(ddi_acc_impl_t *hp, uint8_t *host_addr, uint8_t *dev_addr,
	size_t repcount, uint_t flags)
{
	i_ddi_caut_getput_ctlops(hp, (uint64_t)host_addr, (uint64_t)dev_addr,
	    sizeof (uint8_t), repcount, flags, DDI_CTLOPS_POKE);
}

void
i_ddi_caut_rep_put16(ddi_acc_impl_t *hp, uint16_t *host_addr,
    uint16_t *dev_addr, size_t repcount, uint_t flags)
{
	i_ddi_caut_getput_ctlops(hp, (uint64_t)host_addr, (uint64_t)dev_addr,
	    sizeof (uint16_t), repcount, flags, DDI_CTLOPS_POKE);
}

void
i_ddi_caut_rep_put32(ddi_acc_impl_t *hp, uint32_t *host_addr,
    uint32_t *dev_addr, size_t repcount, uint_t flags)
{
	i_ddi_caut_getput_ctlops(hp, (uint64_t)host_addr, (uint64_t)dev_addr,
	    sizeof (uint32_t), repcount, flags, DDI_CTLOPS_POKE);
}

void
i_ddi_caut_rep_put64(ddi_acc_impl_t *hp, uint64_t *host_addr,
    uint64_t *dev_addr, size_t repcount, uint_t flags)
{
	i_ddi_caut_getput_ctlops(hp, (uint64_t)host_addr, (uint64_t)dev_addr,
	    sizeof (uint64_t), repcount, flags, DDI_CTLOPS_POKE);
}

/*
 * This is called only to process peek/poke when the DIP is NULL.
 * Assume that this is for memory, as nexi take care of device safe accesses.
 */
int
peekpoke_mem(ddi_ctl_enum_t cmd, peekpoke_ctlops_t *in_args)
{
	int err = DDI_SUCCESS;
	on_trap_data_t otd;

	/* Set up protected environment. */
	if (!on_trap(&otd, OT_DATA_ACCESS)) {
		uintptr_t tramp = otd.ot_trampoline;

		if (cmd == DDI_CTLOPS_POKE) {
			otd.ot_trampoline = (uintptr_t)&poke_fault;
			err = do_poke(in_args->size, (void *)in_args->dev_addr,
			    (void *)in_args->host_addr);
		} else {
			otd.ot_trampoline = (uintptr_t)&peek_fault;
			err = do_peek(in_args->size, (void *)in_args->dev_addr,
			    (void *)in_args->host_addr);
		}
		otd.ot_trampoline = tramp;
	} else
		err = DDI_FAILURE;

	/* Take down protected environment. */
	no_trap();

	return (err);
}