1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 /* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */ 28 /* All Rights Reserved */ 29 30 #include <sys/types.h> 31 #include <sys/t_lock.h> 32 #include <sys/param.h> 33 #include <sys/cred.h> 34 #include <sys/debug.h> 35 #include <sys/inline.h> 36 #include <sys/kmem.h> 37 #include <sys/proc.h> 38 #include <sys/sysmacros.h> 39 #include <sys/systm.h> 40 #include <sys/vmsystm.h> 41 #include <sys/vfs.h> 42 #include <sys/vnode.h> 43 #include <sys/pcb.h> 44 #include <sys/buf.h> 45 #include <sys/signal.h> 46 #include <sys/user.h> 47 #include <sys/cpuvar.h> 48 #include <sys/copyops.h> 49 #include <sys/watchpoint.h> 50 51 #include <sys/fault.h> 52 #include <sys/syscall.h> 53 #include <sys/procfs.h> 54 #include <sys/archsystm.h> 55 #include <sys/cmn_err.h> 56 #include <sys/stack.h> 57 #include <sys/machpcb.h> 58 #include <sys/simulate.h> 59 #include <sys/fpu/fpusystm.h> 60 61 #include <sys/pte.h> 62 #include <sys/vmem.h> 63 #include <sys/mman.h> 64 #include <sys/vmparam.h> 65 #include <vm/hat.h> 66 #include <vm/as.h> 67 #include <vm/seg.h> 68 #include <vm/seg_kmem.h> 69 #include <vm/seg_kp.h> 70 #include <vm/page.h> 71 72 #include <fs/proc/prdata.h> 73 #include <v9/sys/psr_compat.h> 74 75 int prnwatch = 10000; /* maximum number of watched areas */ 76 77 /* 78 * Force a thread into the kernel if it is not already there. 79 * This is a no-op on uniprocessors. 80 */ 81 /* ARGSUSED */ 82 void 83 prpokethread(kthread_t *t) 84 { 85 if (t->t_state == TS_ONPROC && t->t_cpu != CPU) 86 poke_cpu(t->t_cpu->cpu_id); 87 } 88 89 /* 90 * Return general registers. 91 */ 92 void 93 prgetprregs(klwp_t *lwp, prgregset_t prp) 94 { 95 gregset_t gr; 96 97 ASSERT(MUTEX_NOT_HELD(&lwptoproc(lwp)->p_lock)); 98 99 getgregs(lwp, gr); 100 bzero(prp, sizeof (prp)); 101 102 /* 103 * Can't copy since prgregset_t and gregset_t 104 * use different defines. 105 */ 106 prp[R_G1] = gr[REG_G1]; 107 prp[R_G2] = gr[REG_G2]; 108 prp[R_G3] = gr[REG_G3]; 109 prp[R_G4] = gr[REG_G4]; 110 prp[R_G5] = gr[REG_G5]; 111 prp[R_G6] = gr[REG_G6]; 112 prp[R_G7] = gr[REG_G7]; 113 114 prp[R_O0] = gr[REG_O0]; 115 prp[R_O1] = gr[REG_O1]; 116 prp[R_O2] = gr[REG_O2]; 117 prp[R_O3] = gr[REG_O3]; 118 prp[R_O4] = gr[REG_O4]; 119 prp[R_O5] = gr[REG_O5]; 120 prp[R_O6] = gr[REG_O6]; 121 prp[R_O7] = gr[REG_O7]; 122 123 if (lwp->lwp_pcb.pcb_xregstat != XREGNONE) { 124 prp[R_L0] = lwp->lwp_pcb.pcb_xregs.rw_local[0]; 125 prp[R_L1] = lwp->lwp_pcb.pcb_xregs.rw_local[1]; 126 prp[R_L2] = lwp->lwp_pcb.pcb_xregs.rw_local[2]; 127 prp[R_L3] = lwp->lwp_pcb.pcb_xregs.rw_local[3]; 128 prp[R_L4] = lwp->lwp_pcb.pcb_xregs.rw_local[4]; 129 prp[R_L5] = lwp->lwp_pcb.pcb_xregs.rw_local[5]; 130 prp[R_L6] = lwp->lwp_pcb.pcb_xregs.rw_local[6]; 131 prp[R_L7] = lwp->lwp_pcb.pcb_xregs.rw_local[7]; 132 133 prp[R_I0] = lwp->lwp_pcb.pcb_xregs.rw_in[0]; 134 prp[R_I1] = lwp->lwp_pcb.pcb_xregs.rw_in[1]; 135 prp[R_I2] = lwp->lwp_pcb.pcb_xregs.rw_in[2]; 136 prp[R_I3] = lwp->lwp_pcb.pcb_xregs.rw_in[3]; 137 prp[R_I4] = lwp->lwp_pcb.pcb_xregs.rw_in[4]; 138 prp[R_I5] = lwp->lwp_pcb.pcb_xregs.rw_in[5]; 139 prp[R_I6] = lwp->lwp_pcb.pcb_xregs.rw_in[6]; 140 prp[R_I7] = lwp->lwp_pcb.pcb_xregs.rw_in[7]; 141 } 142 143 prp[R_CCR] = gr[REG_CCR]; 144 prp[R_ASI] = gr[REG_ASI]; 145 prp[R_FPRS] = gr[REG_FPRS]; 146 prp[R_PC] = gr[REG_PC]; 147 prp[R_nPC] = gr[REG_nPC]; 148 prp[R_Y] = gr[REG_Y]; 149 } 150 151 /* 152 * Set general registers. 153 */ 154 void 155 prsetprregs(klwp_t *lwp, prgregset_t prp, int initial) 156 { 157 gregset_t gr; 158 159 gr[REG_G1] = prp[R_G1]; 160 gr[REG_G2] = prp[R_G2]; 161 gr[REG_G3] = prp[R_G3]; 162 gr[REG_G4] = prp[R_G4]; 163 gr[REG_G5] = prp[R_G5]; 164 gr[REG_G6] = prp[R_G6]; 165 gr[REG_G7] = prp[R_G7]; 166 167 gr[REG_O0] = prp[R_O0]; 168 gr[REG_O1] = prp[R_O1]; 169 gr[REG_O2] = prp[R_O2]; 170 gr[REG_O3] = prp[R_O3]; 171 gr[REG_O4] = prp[R_O4]; 172 gr[REG_O5] = prp[R_O5]; 173 gr[REG_O6] = prp[R_O6]; 174 gr[REG_O7] = prp[R_O7]; 175 176 lwp->lwp_pcb.pcb_xregs.rw_local[0] = prp[R_L0]; 177 lwp->lwp_pcb.pcb_xregs.rw_local[1] = prp[R_L1]; 178 lwp->lwp_pcb.pcb_xregs.rw_local[2] = prp[R_L2]; 179 lwp->lwp_pcb.pcb_xregs.rw_local[3] = prp[R_L3]; 180 lwp->lwp_pcb.pcb_xregs.rw_local[4] = prp[R_L4]; 181 lwp->lwp_pcb.pcb_xregs.rw_local[5] = prp[R_L5]; 182 lwp->lwp_pcb.pcb_xregs.rw_local[6] = prp[R_L6]; 183 lwp->lwp_pcb.pcb_xregs.rw_local[7] = prp[R_L7]; 184 185 lwp->lwp_pcb.pcb_xregs.rw_in[0] = prp[R_I0]; 186 lwp->lwp_pcb.pcb_xregs.rw_in[1] = prp[R_I1]; 187 lwp->lwp_pcb.pcb_xregs.rw_in[2] = prp[R_I2]; 188 lwp->lwp_pcb.pcb_xregs.rw_in[3] = prp[R_I3]; 189 lwp->lwp_pcb.pcb_xregs.rw_in[4] = prp[R_I4]; 190 lwp->lwp_pcb.pcb_xregs.rw_in[5] = prp[R_I5]; 191 lwp->lwp_pcb.pcb_xregs.rw_in[6] = prp[R_I6]; 192 lwp->lwp_pcb.pcb_xregs.rw_in[7] = prp[R_I7]; 193 194 lwp->lwp_pcb.pcb_xregstat = XREGMODIFIED; 195 lwptot(lwp)->t_post_sys = 1; 196 197 /* 198 * setgregs will only allow the condition codes to be set. 199 */ 200 gr[REG_CCR] = prp[R_CCR]; 201 gr[REG_ASI] = prp[R_ASI]; 202 gr[REG_FPRS] = prp[R_FPRS]; 203 gr[REG_PC] = prp[R_PC]; 204 gr[REG_nPC] = prp[R_nPC]; 205 gr[REG_Y] = prp[R_Y]; 206 207 if (initial) { /* set initial values */ 208 if (lwptoproc(lwp)->p_model == DATAMODEL_LP64) 209 lwptoregs(lwp)->r_tstate = TSTATE_USER64|TSTATE_MM_TSO; 210 else 211 lwptoregs(lwp)->r_tstate = TSTATE_USER32|TSTATE_MM_TSO; 212 if (!fpu_exists) 213 lwptoregs(lwp)->r_tstate &= ~TSTATE_PEF; 214 } 215 216 setgregs(lwp, gr); 217 } 218 219 #ifdef _SYSCALL32_IMPL 220 221 /* 222 * modify the lower 32bits of a uint64_t 223 */ 224 #define SET_LOWER_32(all, lower) \ 225 (((uint64_t)(all) & 0xffffffff00000000) | (uint32_t)(lower)) 226 227 /* 228 * Convert prgregset32 to native prgregset. 229 */ 230 void 231 prgregset_32ton(klwp_t *lwp, prgregset32_t src, prgregset_t dest) 232 { 233 struct regs *r = lwptoregs(lwp); 234 235 dest[R_G0] = SET_LOWER_32(0, src[R_G0]); 236 dest[R_G1] = SET_LOWER_32(r->r_g1, src[R_G1]); 237 dest[R_G2] = SET_LOWER_32(r->r_g2, src[R_G2]); 238 dest[R_G3] = SET_LOWER_32(r->r_g3, src[R_G3]); 239 dest[R_G4] = SET_LOWER_32(r->r_g4, src[R_G4]); 240 dest[R_G5] = SET_LOWER_32(r->r_g5, src[R_G5]); 241 dest[R_G6] = SET_LOWER_32(r->r_g6, src[R_G6]); 242 dest[R_G7] = SET_LOWER_32(r->r_g7, src[R_G7]); 243 244 dest[R_O0] = SET_LOWER_32(r->r_o0, src[R_O0]); 245 dest[R_O1] = SET_LOWER_32(r->r_o1, src[R_O1]); 246 dest[R_O2] = SET_LOWER_32(r->r_o2, src[R_O2]); 247 dest[R_O3] = SET_LOWER_32(r->r_o3, src[R_O3]); 248 dest[R_O4] = SET_LOWER_32(r->r_o4, src[R_O4]); 249 dest[R_O5] = SET_LOWER_32(r->r_o5, src[R_O5]); 250 dest[R_O6] = SET_LOWER_32(r->r_o6, src[R_O6]); 251 dest[R_O7] = SET_LOWER_32(r->r_o7, src[R_O7]); 252 253 if (lwp->lwp_pcb.pcb_xregstat != XREGNONE) { 254 struct rwindow *rw = &lwp->lwp_pcb.pcb_xregs; 255 256 dest[R_L0] = SET_LOWER_32(rw->rw_local[0], src[R_L0]); 257 dest[R_L1] = SET_LOWER_32(rw->rw_local[1], src[R_L1]); 258 dest[R_L2] = SET_LOWER_32(rw->rw_local[2], src[R_L2]); 259 dest[R_L3] = SET_LOWER_32(rw->rw_local[3], src[R_L3]); 260 dest[R_L4] = SET_LOWER_32(rw->rw_local[4], src[R_L4]); 261 dest[R_L5] = SET_LOWER_32(rw->rw_local[5], src[R_L5]); 262 dest[R_L6] = SET_LOWER_32(rw->rw_local[6], src[R_L6]); 263 dest[R_L7] = SET_LOWER_32(rw->rw_local[7], src[R_L7]); 264 265 dest[R_I0] = SET_LOWER_32(rw->rw_in[0], src[R_I0]); 266 dest[R_I1] = SET_LOWER_32(rw->rw_in[1], src[R_I1]); 267 dest[R_I2] = SET_LOWER_32(rw->rw_in[2], src[R_I2]); 268 dest[R_I3] = SET_LOWER_32(rw->rw_in[3], src[R_I3]); 269 dest[R_I4] = SET_LOWER_32(rw->rw_in[4], src[R_I4]); 270 dest[R_I5] = SET_LOWER_32(rw->rw_in[5], src[R_I5]); 271 dest[R_I6] = SET_LOWER_32(rw->rw_in[6], src[R_I6]); 272 dest[R_I7] = SET_LOWER_32(rw->rw_in[7], src[R_I7]); 273 } else { 274 dest[R_L0] = (uint32_t)src[R_L0]; 275 dest[R_L1] = (uint32_t)src[R_L1]; 276 dest[R_L2] = (uint32_t)src[R_L2]; 277 dest[R_L3] = (uint32_t)src[R_L3]; 278 dest[R_L4] = (uint32_t)src[R_L4]; 279 dest[R_L5] = (uint32_t)src[R_L5]; 280 dest[R_L6] = (uint32_t)src[R_L6]; 281 dest[R_L7] = (uint32_t)src[R_L7]; 282 283 dest[R_I0] = (uint32_t)src[R_I0]; 284 dest[R_I1] = (uint32_t)src[R_I1]; 285 dest[R_I2] = (uint32_t)src[R_I2]; 286 dest[R_I3] = (uint32_t)src[R_I3]; 287 dest[R_I4] = (uint32_t)src[R_I4]; 288 dest[R_I5] = (uint32_t)src[R_I5]; 289 dest[R_I6] = (uint32_t)src[R_I6]; 290 dest[R_I7] = (uint32_t)src[R_I7]; 291 } 292 293 dest[R_CCR] = ((r->r_tstate >> TSTATE_CCR_SHIFT) & CCR_XCC) | 294 ((src[R_PSR] >> (TSTATE_CCR_SHIFT-PSR_TSTATE_CC_SHIFT)) & CCR_ICC); 295 296 dest[R_PC] = SET_LOWER_32(r->r_pc, src[R_PC]); 297 dest[R_nPC] = SET_LOWER_32(r->r_npc, src[R_nPC]); 298 dest[R_Y] = (uint32_t)src[R_Y]; 299 300 dest[R_ASI] = (r->r_tstate >> TSTATE_ASI_SHIFT) & TSTATE_ASI_MASK; 301 dest[R_FPRS] = lwptofpu(lwp)->fpu_fprs; 302 } 303 304 /* 305 * Return 32-bit general registers. 306 */ 307 308 /* conversion from 64-bit register to 32-bit register */ 309 #define R32(r) (prgreg32_t)(uint32_t)(r) 310 311 void 312 prgetprregs32(klwp_t *lwp, prgregset32_t prp) 313 { 314 gregset32_t gr; 315 316 extern void getgregs32(klwp_t *, gregset32_t); 317 318 ASSERT(MUTEX_NOT_HELD(&lwptoproc(lwp)->p_lock)); 319 320 getgregs32(lwp, gr); 321 bzero(prp, sizeof (prp)); 322 323 /* 324 * Can't copy since prgregset_t and gregset_t 325 * use different defines. 326 */ 327 prp[R_G1] = gr[REG_G1]; 328 prp[R_G2] = gr[REG_G2]; 329 prp[R_G3] = gr[REG_G3]; 330 prp[R_G4] = gr[REG_G4]; 331 prp[R_G5] = gr[REG_G5]; 332 prp[R_G6] = gr[REG_G6]; 333 prp[R_G7] = gr[REG_G7]; 334 335 prp[R_O0] = gr[REG_O0]; 336 prp[R_O1] = gr[REG_O1]; 337 prp[R_O2] = gr[REG_O2]; 338 prp[R_O3] = gr[REG_O3]; 339 prp[R_O4] = gr[REG_O4]; 340 prp[R_O5] = gr[REG_O5]; 341 prp[R_O6] = gr[REG_O6]; 342 prp[R_O7] = gr[REG_O7]; 343 344 if (lwp->lwp_pcb.pcb_xregstat != XREGNONE) { 345 prp[R_L0] = R32(lwp->lwp_pcb.pcb_xregs.rw_local[0]); 346 prp[R_L1] = R32(lwp->lwp_pcb.pcb_xregs.rw_local[1]); 347 prp[R_L2] = R32(lwp->lwp_pcb.pcb_xregs.rw_local[2]); 348 prp[R_L3] = R32(lwp->lwp_pcb.pcb_xregs.rw_local[3]); 349 prp[R_L4] = R32(lwp->lwp_pcb.pcb_xregs.rw_local[4]); 350 prp[R_L5] = R32(lwp->lwp_pcb.pcb_xregs.rw_local[5]); 351 prp[R_L6] = R32(lwp->lwp_pcb.pcb_xregs.rw_local[6]); 352 prp[R_L7] = R32(lwp->lwp_pcb.pcb_xregs.rw_local[7]); 353 354 prp[R_I0] = R32(lwp->lwp_pcb.pcb_xregs.rw_in[0]); 355 prp[R_I1] = R32(lwp->lwp_pcb.pcb_xregs.rw_in[1]); 356 prp[R_I2] = R32(lwp->lwp_pcb.pcb_xregs.rw_in[2]); 357 prp[R_I3] = R32(lwp->lwp_pcb.pcb_xregs.rw_in[3]); 358 prp[R_I4] = R32(lwp->lwp_pcb.pcb_xregs.rw_in[4]); 359 prp[R_I5] = R32(lwp->lwp_pcb.pcb_xregs.rw_in[5]); 360 prp[R_I6] = R32(lwp->lwp_pcb.pcb_xregs.rw_in[6]); 361 prp[R_I7] = R32(lwp->lwp_pcb.pcb_xregs.rw_in[7]); 362 } 363 364 prp[R_PSR] = gr[REG_PSR]; 365 prp[R_PC] = gr[REG_PC]; 366 prp[R_nPC] = gr[REG_nPC]; 367 prp[R_Y] = gr[REG_Y]; 368 } 369 370 #endif /* _SYSCALL32_IMPL */ 371 372 /* 373 * Get the syscall return values for the lwp. 374 */ 375 int 376 prgetrvals(klwp_t *lwp, long *rval1, long *rval2) 377 { 378 struct regs *r = lwptoregs(lwp); 379 380 if (r->r_tstate & TSTATE_IC) 381 return ((int)r->r_o0); 382 if (lwp->lwp_eosys == JUSTRETURN) { 383 *rval1 = 0; 384 *rval2 = 0; 385 } else if (lwptoproc(lwp)->p_model == DATAMODEL_ILP32) { 386 *rval1 = r->r_o0 & (uint32_t)0xffffffffU; 387 *rval2 = r->r_o1 & (uint32_t)0xffffffffU; 388 } else { 389 *rval1 = r->r_o0; 390 *rval2 = r->r_o1; 391 } 392 return (0); 393 } 394 395 /* 396 * Does the system support floating-point, either through hardware 397 * or by trapping and emulating floating-point machine instructions? 398 */ 399 int 400 prhasfp(void) 401 { 402 /* 403 * SunOS5.0 emulates floating-point if FP hardware is not present. 404 */ 405 return (1); 406 } 407 408 /* 409 * Get floating-point registers. 410 */ 411 void 412 prgetprfpregs(klwp_t *lwp, prfpregset_t *pfp) 413 { 414 bzero(pfp, sizeof (*pfp)); 415 /* 416 * This works only because prfpregset_t is intentionally 417 * constructed to be identical to fpregset_t, with additional 418 * space for the floating-point queue at the end. 419 */ 420 getfpregs(lwp, (fpregset_t *)pfp); 421 /* 422 * This is supposed to be a pointer to the floating point queue. 423 * We can't provide such a thing through the /proc interface. 424 */ 425 pfp->pr_filler = 0; 426 /* 427 * XXX: to be done: fetch the FP queue if it is non-empty. 428 */ 429 } 430 431 #ifdef _SYSCALL32_IMPL 432 void 433 prgetprfpregs32(klwp_t *lwp, prfpregset32_t *pfp) 434 { 435 bzero(pfp, sizeof (*pfp)); 436 /* 437 * This works only because prfpregset32_t is intentionally 438 * constructed to be identical to fpregset32_t, with additional 439 * space for the floating-point queue at the end. 440 */ 441 getfpregs32(lwp, (fpregset32_t *)pfp); 442 /* 443 * This is supposed to be a pointer to the floating point queue. 444 * We can't provide such a thing through the /proc interface. 445 */ 446 pfp->pr_filler = 0; 447 /* 448 * XXX: to be done: fetch the FP queue if it is non-empty. 449 */ 450 } 451 #endif /* _SYSCALL32_IMPL */ 452 453 /* 454 * Set floating-point registers. 455 */ 456 void 457 prsetprfpregs(klwp_t *lwp, prfpregset_t *pfp) 458 { 459 /* 460 * XXX: to be done: store the FP queue if it is non-empty. 461 */ 462 pfp->pr_qcnt = 0; 463 /* 464 * We set fpu_en before calling setfpregs() in order to 465 * retain the semantics of this operation from older 466 * versions of the system. SunOS 5.4 and prior never 467 * queried fpu_en; they just set the registers. The 468 * proper operation if fpu_en is zero is to disable 469 * floating point in the target process, but this can 470 * only change after a proper end-of-life period for 471 * the old semantics. 472 */ 473 pfp->pr_en = 1; 474 /* 475 * This works only because prfpregset_t is intentionally 476 * constructed to be identical to fpregset_t, with additional 477 * space for the floating-point queue at the end. 478 */ 479 setfpregs(lwp, (fpregset_t *)pfp); 480 } 481 482 #ifdef _SYSCALL32_IMPL 483 void 484 prsetprfpregs32(klwp_t *lwp, prfpregset32_t *pfp) 485 { 486 /* 487 * XXX: to be done: store the FP queue if it is non-empty. 488 */ 489 pfp->pr_qcnt = 0; 490 /* 491 * We set fpu_en before calling setfpregs() in order to 492 * retain the semantics of this operation from older 493 * versions of the system. SunOS 5.4 and prior never 494 * queried fpu_en; they just set the registers. The 495 * proper operation if fpu_en is zero is to disable 496 * floating point in the target process, but this can 497 * only change after a proper end-of-life period for 498 * the old semantics. 499 */ 500 pfp->pr_en = 1; 501 /* 502 * This works only because prfpregset32_t is intentionally 503 * constructed to be identical to fpregset32_t, with additional 504 * space for the floating-point queue at the end. 505 */ 506 setfpregs32(lwp, (fpregset32_t *)pfp); 507 } 508 #endif /* _SYSCALL32_IMPL */ 509 510 /* 511 * Does the system support extra register state? 512 * In a kernel that supports both an _LP64 and an _ILP32 data model, 513 * the answer depends on the data model of the process. 514 * An _LP64 process does not have extra registers. 515 */ 516 int 517 prhasx(proc_t *p) 518 { 519 extern int xregs_exists; 520 521 if (p->p_model == DATAMODEL_LP64) 522 return (0); 523 else 524 return (xregs_exists); 525 } 526 527 /* 528 * Get the size of the extra registers. 529 */ 530 int 531 prgetprxregsize(proc_t *p) 532 { 533 return (xregs_getsize(p)); 534 } 535 536 /* 537 * Get extra registers. 538 */ 539 void 540 prgetprxregs(klwp_t *lwp, caddr_t prx) 541 { 542 extern void xregs_get(struct _klwp *, caddr_t); 543 544 (void) xregs_get(lwp, prx); 545 } 546 547 /* 548 * Set extra registers. 549 */ 550 void 551 prsetprxregs(klwp_t *lwp, caddr_t prx) 552 { 553 extern void xregs_set(struct _klwp *, caddr_t); 554 555 (void) xregs_set(lwp, prx); 556 } 557 558 /* 559 * Get the ancillary state registers. 560 */ 561 void 562 prgetasregs(klwp_t *lwp, asrset_t asrset) 563 { 564 bzero(asrset, sizeof (asrset_t)); 565 getasrs(lwp, asrset); 566 getfpasrs(lwp, asrset); 567 } 568 569 /* 570 * Set the ancillary state registers. 571 */ 572 void 573 prsetasregs(klwp_t *lwp, asrset_t asrset) 574 { 575 setasrs(lwp, asrset); 576 setfpasrs(lwp, asrset); 577 } 578 579 /* 580 * Return the base (lower limit) of the process stack. 581 */ 582 caddr_t 583 prgetstackbase(proc_t *p) 584 { 585 return (p->p_usrstack - p->p_stksize); 586 } 587 588 /* 589 * Return the "addr" field for pr_addr in prpsinfo_t. 590 * This is a vestige of the past, so whatever we return is OK. 591 */ 592 caddr_t 593 prgetpsaddr(proc_t *p) 594 { 595 return ((caddr_t)p); 596 } 597 598 /* 599 * Arrange to single-step the lwp. 600 */ 601 void 602 prstep(klwp_t *lwp, int watchstep) 603 { 604 ASSERT(MUTEX_NOT_HELD(&lwptoproc(lwp)->p_lock)); 605 606 lwp->lwp_pcb.pcb_step = STEP_REQUESTED; 607 lwp->lwp_pcb.pcb_tracepc = NULL; 608 if (watchstep) 609 lwp->lwp_pcb.pcb_flags |= WATCH_STEP; 610 else 611 lwp->lwp_pcb.pcb_flags |= NORMAL_STEP; 612 } 613 614 /* 615 * Undo prstep(). 616 */ 617 void 618 prnostep(klwp_t *lwp) 619 { 620 ASSERT(ttolwp(curthread) == lwp || 621 MUTEX_NOT_HELD(&lwptoproc(lwp)->p_lock)); 622 623 lwp->lwp_pcb.pcb_step = STEP_NONE; 624 lwp->lwp_pcb.pcb_tracepc = NULL; 625 lwp->lwp_pcb.pcb_flags &= ~(NORMAL_STEP|WATCH_STEP); 626 } 627 628 /* 629 * Return non-zero if a single-step is in effect. 630 */ 631 int 632 prisstep(klwp_t *lwp) 633 { 634 ASSERT(MUTEX_NOT_HELD(&lwptoproc(lwp)->p_lock)); 635 636 return (lwp->lwp_pcb.pcb_step != STEP_NONE); 637 } 638 639 /* 640 * Set the PC to the specified virtual address. 641 */ 642 void 643 prsvaddr(klwp_t *lwp, caddr_t vaddr) 644 { 645 struct regs *r = lwptoregs(lwp); 646 647 ASSERT(MUTEX_NOT_HELD(&lwptoproc(lwp)->p_lock)); 648 649 /* 650 * pc and npc must be word aligned on sparc. 651 * We silently make it so to avoid a watchdog reset. 652 */ 653 r->r_pc = (uintptr_t)vaddr & ~03L; 654 r->r_npc = r->r_pc + 4; 655 } 656 657 /* 658 * Map address "addr" in address space "as" into a kernel virtual address. 659 * The memory is guaranteed to be resident and locked down. 660 */ 661 caddr_t 662 prmapin(struct as *as, caddr_t addr, int writing) 663 { 664 page_t *pp; 665 caddr_t kaddr; 666 pfn_t pfnum; 667 668 /* 669 * XXX - Because of past mistakes, we have bits being returned 670 * by getpfnum that are actually the page type bits of the pte. 671 * When the object we are trying to map is a memory page with 672 * a page structure everything is ok and we can use the optimal 673 * method, ppmapin. Otherwise, we have to do something special. 674 */ 675 pfnum = hat_getpfnum(as->a_hat, addr); 676 if (pf_is_memory(pfnum)) { 677 pp = page_numtopp_nolock(pfnum); 678 if (pp != NULL) { 679 ASSERT(PAGE_LOCKED(pp)); 680 kaddr = ppmapin(pp, writing ? 681 (PROT_READ | PROT_WRITE) : PROT_READ, 682 (caddr_t)-1); 683 return (kaddr + ((uintptr_t)addr & PAGEOFFSET)); 684 } 685 } 686 687 /* 688 * Oh well, we didn't have a page struct for the object we were 689 * trying to map in; ppmapin doesn't handle devices, but allocating a 690 * heap address allows ppmapout to free virutal space when done. 691 */ 692 kaddr = vmem_alloc(heap_arena, PAGESIZE, VM_SLEEP); 693 694 hat_devload(kas.a_hat, kaddr, PAGESIZE, pfnum, 695 writing ? (PROT_READ | PROT_WRITE) : PROT_READ, HAT_LOAD_LOCK); 696 697 return (kaddr + ((uintptr_t)addr & PAGEOFFSET)); 698 } 699 700 /* 701 * Unmap address "addr" in address space "as"; inverse of prmapin(). 702 */ 703 /* ARGSUSED */ 704 void 705 prmapout(struct as *as, caddr_t addr, caddr_t vaddr, int writing) 706 { 707 extern void ppmapout(caddr_t); 708 709 vaddr = (caddr_t)((uintptr_t)vaddr & PAGEMASK); 710 ppmapout(vaddr); 711 } 712 713 714 #define BAMASK22 0xffc00000 /* for masking out disp22 from ba,a */ 715 #define BAA 0x30800000 /* ba,a without disp22 */ 716 #define FBAA 0x31800000 /* fba,a without disp22 */ 717 #define CBAA 0x31c00000 /* cba,a without disp22 */ 718 719 #define BAMASK19 0xfff80000 /* for masking out disp19 from ba,a %[ix]cc */ 720 #define BAA_icc 0x30480000 /* ba,a %icc without disp19 */ 721 #define BAA_xcc 0x30680000 /* ba,a %xcc without disp19 */ 722 723 724 /* 725 * Prepare to single-step the lwp if requested. 726 * This is called by the lwp itself just before returning to user level. 727 */ 728 void 729 prdostep(void) 730 { 731 klwp_t *lwp = ttolwp(curthread); 732 struct regs *r = lwptoregs(lwp); 733 proc_t *p = lwptoproc(lwp); 734 struct as *as = p->p_as; 735 caddr_t pc; 736 caddr_t npc; 737 738 ASSERT(lwp != NULL); 739 ASSERT(r != NULL); 740 741 if (lwp->lwp_pcb.pcb_step == STEP_NONE || 742 lwp->lwp_pcb.pcb_step == STEP_ACTIVE) 743 return; 744 745 if (p->p_model == DATAMODEL_ILP32) { 746 pc = (caddr_t)(uintptr_t)(caddr32_t)r->r_pc; 747 npc = (caddr_t)(uintptr_t)(caddr32_t)r->r_npc; 748 } else { 749 pc = (caddr_t)r->r_pc; 750 npc = (caddr_t)r->r_npc; 751 } 752 753 if (lwp->lwp_pcb.pcb_step == STEP_WASACTIVE) { 754 if (npc == (caddr_t)lwp->lwp_pcb.pcb_tracepc) 755 r->r_npc = (greg_t)as->a_userlimit; 756 else { 757 lwp->lwp_pcb.pcb_tracepc = (void *)pc; 758 r->r_pc = (greg_t)as->a_userlimit; 759 } 760 } else { 761 /* 762 * Single-stepping on sparc is effected by setting nPC 763 * to an invalid address and expecting FLTBOUNDS to 764 * occur after the instruction at PC is executed. 765 * This is not the whole story, however; we must 766 * deal with branch-always instructions with the 767 * annul bit set as a special case here. 768 * 769 * fuword() returns -1 on error and we can't distinguish 770 * this from a legitimate instruction of all 1's. 771 * However 0xffffffff is not one of the branch-always 772 * instructions we are interested in. No problem. 773 */ 774 int32_t instr; 775 int32_t i; 776 777 if (fuword32_nowatch((void *)pc, (uint32_t *)&instr) != 0) 778 instr = -1; 779 if ((i = instr & BAMASK22) == BAA || i == FBAA || i == CBAA) { 780 /* 781 * For ba,a and relatives, compute the 782 * new PC from the instruction. 783 */ 784 i = (instr << 10) >> 8; 785 lwp->lwp_pcb.pcb_tracepc = (void *)(pc + i); 786 r->r_pc = (greg_t)as->a_userlimit; 787 r->r_npc = r->r_pc + 4; 788 } else if ((i = instr & BAMASK19) == BAA_icc || i == BAA_xcc) { 789 /* 790 * For ba,a %icc and ba,a %xcc, compute the 791 * new PC from the instruction. 792 */ 793 i = (instr << 13) >> 11; 794 lwp->lwp_pcb.pcb_tracepc = (void *)(pc + i); 795 r->r_pc = (greg_t)as->a_userlimit; 796 r->r_npc = r->r_pc + 4; 797 } else { 798 lwp->lwp_pcb.pcb_tracepc = (void *)npc; 799 r->r_npc = (greg_t)as->a_userlimit; 800 } 801 } 802 803 lwp->lwp_pcb.pcb_step = STEP_ACTIVE; 804 } 805 806 /* 807 * Wrap up single stepping of the lwp. 808 * This is called by the lwp itself just after it has taken 809 * the FLTBOUNDS trap. We fix up the PC and nPC to have their 810 * proper values after the step. We return 1 to indicate that 811 * this fault really is the one we are expecting, else 0. 812 * 813 * This is also called from syscall() and stop() to reset PC 814 * and nPC to their proper values for debugger visibility. 815 */ 816 int 817 prundostep(void) 818 { 819 klwp_t *lwp = ttolwp(curthread); 820 proc_t *p = ttoproc(curthread); 821 struct as *as = p->p_as; 822 int rc = 0; 823 caddr_t pc; 824 caddr_t npc; 825 826 ASSERT(lwp != NULL); 827 828 if (lwp->lwp_pcb.pcb_step == STEP_ACTIVE) { 829 struct regs *r = lwptoregs(lwp); 830 831 ASSERT(r != NULL); 832 833 if (p->p_model == DATAMODEL_ILP32) { 834 pc = (caddr_t)(uintptr_t)(caddr32_t)r->r_pc; 835 npc = (caddr_t)(uintptr_t)(caddr32_t)r->r_npc; 836 } else { 837 pc = (caddr_t)r->r_pc; 838 npc = (caddr_t)r->r_npc; 839 } 840 841 if (pc == (caddr_t)as->a_userlimit || 842 pc == (caddr_t)as->a_userlimit + 4) { 843 if (pc == (caddr_t)as->a_userlimit) { 844 r->r_pc = (greg_t)lwp->lwp_pcb.pcb_tracepc; 845 if (npc == (caddr_t)as->a_userlimit + 4) 846 r->r_npc = r->r_pc + 4; 847 } else { 848 r->r_pc = (greg_t)lwp->lwp_pcb.pcb_tracepc + 4; 849 r->r_npc = r->r_pc + 4; 850 } 851 rc = 1; 852 } else { 853 r->r_npc = (greg_t)lwp->lwp_pcb.pcb_tracepc; 854 } 855 lwp->lwp_pcb.pcb_step = STEP_WASACTIVE; 856 } 857 858 return (rc); 859 } 860 861 /* 862 * Make sure the lwp is in an orderly state 863 * for inspection by a debugger through /proc. 864 * 865 * This needs to be called only once while the current thread remains in the 866 * kernel and needs to be called while holding no resources (mutex locks, etc). 867 * 868 * As a hedge against these conditions, if prstop() is called repeatedly 869 * before prunstop() is called, it does nothing and just returns. 870 * 871 * prunstop() must be called before the thread returns to user level. 872 */ 873 /* ARGSUSED */ 874 void 875 prstop(int why, int what) 876 { 877 klwp_t *lwp = ttolwp(curthread); 878 proc_t *p = lwptoproc(lwp); 879 struct regs *r = lwptoregs(lwp); 880 kfpu_t *pfp = lwptofpu(lwp); 881 caddr_t sp; 882 caddr_t pc; 883 int watched; 884 extern void fp_prsave(kfpu_t *); 885 886 if (lwp->lwp_pcb.pcb_flags & PRSTOP_CALLED) 887 return; 888 889 /* 890 * Make sure we don't deadlock on a recursive call 891 * to prstop(). stop() tests the lwp_nostop flag. 892 */ 893 ASSERT(lwp->lwp_nostop == 0); 894 lwp->lwp_nostop = 1; 895 (void) flush_user_windows_to_stack(NULL); 896 if (lwp->lwp_pcb.pcb_step != STEP_NONE) 897 (void) prundostep(); 898 899 if (lwp->lwp_pcb.pcb_xregstat == XREGNONE) { 900 /* 901 * Attempt to fetch the last register window from the stack. 902 * If that fails, look for it in the pcb. 903 * If that fails, give up. 904 */ 905 struct machpcb *mpcb = lwptompcb(lwp); 906 struct rwindow32 rwindow32; 907 size_t rw_size; 908 caddr_t rwp; 909 int is64; 910 911 if (mpcb->mpcb_wstate == WSTATE_USER32) { 912 rw_size = sizeof (struct rwindow32); 913 sp = (caddr_t)(uintptr_t)(caddr32_t)r->r_sp; 914 rwp = sp; 915 is64 = 0; 916 } else { 917 rw_size = sizeof (struct rwindow); 918 sp = (caddr_t)r->r_sp; 919 rwp = sp + V9BIAS64; 920 is64 = 1; 921 } 922 923 watched = watch_disable_addr(rwp, rw_size, S_READ); 924 if (is64 && 925 copyin(rwp, &lwp->lwp_pcb.pcb_xregs, rw_size) == 0) 926 lwp->lwp_pcb.pcb_xregstat = XREGPRESENT; 927 else if (!is64 && 928 copyin(rwp, &rwindow32, rw_size) == 0) { 929 rwindow_32ton(&rwindow32, &lwp->lwp_pcb.pcb_xregs); 930 lwp->lwp_pcb.pcb_xregstat = XREGPRESENT; 931 } else { 932 int i; 933 934 for (i = 0; i < mpcb->mpcb_wbcnt; i++) { 935 if (sp == mpcb->mpcb_spbuf[i]) { 936 if (is64) { 937 bcopy(mpcb->mpcb_wbuf + 938 (i * rw_size), 939 &lwp->lwp_pcb.pcb_xregs, 940 rw_size); 941 } else { 942 struct rwindow32 *rw32 = 943 (struct rwindow32 *) 944 (mpcb->mpcb_wbuf + 945 (i * rw_size)); 946 rwindow_32ton(rw32, 947 &lwp->lwp_pcb.pcb_xregs); 948 } 949 lwp->lwp_pcb.pcb_xregstat = XREGPRESENT; 950 break; 951 } 952 } 953 } 954 if (watched) 955 watch_enable_addr(rwp, rw_size, S_READ); 956 } 957 958 /* 959 * Make sure the floating point state is saved. 960 */ 961 fp_prsave(pfp); 962 963 if (p->p_model == DATAMODEL_ILP32) 964 pc = (caddr_t)(uintptr_t)(caddr32_t)r->r_pc; 965 else 966 pc = (caddr_t)r->r_pc; 967 968 if (copyin_nowatch(pc, &lwp->lwp_pcb.pcb_instr, 969 sizeof (lwp->lwp_pcb.pcb_instr)) == 0) 970 lwp->lwp_pcb.pcb_flags |= INSTR_VALID; 971 else { 972 lwp->lwp_pcb.pcb_flags &= ~INSTR_VALID; 973 lwp->lwp_pcb.pcb_instr = 0; 974 } 975 976 (void) save_syscall_args(); 977 ASSERT(lwp->lwp_nostop == 1); 978 lwp->lwp_nostop = 0; 979 980 lwp->lwp_pcb.pcb_flags |= PRSTOP_CALLED; 981 aston(curthread); /* so prunstop() will be called */ 982 } 983 984 /* 985 * Inform prstop() that it should do its work again 986 * the next time it is called. 987 */ 988 void 989 prunstop(void) 990 { 991 ttolwp(curthread)->lwp_pcb.pcb_flags &= ~PRSTOP_CALLED; 992 } 993 994 /* 995 * Fetch the user-level instruction on which the lwp is stopped. 996 * It was saved by the lwp itself, in prstop(). 997 * Return non-zero if the instruction is valid. 998 */ 999 int 1000 prfetchinstr(klwp_t *lwp, ulong_t *ip) 1001 { 1002 *ip = (ulong_t)(instr_t)lwp->lwp_pcb.pcb_instr; 1003 return (lwp->lwp_pcb.pcb_flags & INSTR_VALID); 1004 } 1005 1006 int 1007 prnwindows(klwp_t *lwp) 1008 { 1009 struct machpcb *mpcb = lwptompcb(lwp); 1010 1011 return (mpcb->mpcb_wbcnt); 1012 } 1013 1014 void 1015 prgetwindows(klwp_t *lwp, gwindows_t *gwp) 1016 { 1017 getgwins(lwp, gwp); 1018 } 1019 1020 #ifdef _SYSCALL32_IMPL 1021 void 1022 prgetwindows32(klwp_t *lwp, gwindows32_t *gwp) 1023 { 1024 getgwins32(lwp, gwp); 1025 } 1026 #endif /* _SYSCALL32_IMPL */ 1027 1028 /* 1029 * Called from trap() when a load or store instruction 1030 * falls in a watched page but is not a watchpoint. 1031 * We emulate the instruction in the kernel. 1032 */ 1033 int 1034 pr_watch_emul(struct regs *rp, caddr_t addr, enum seg_rw rw) 1035 { 1036 char *badaddr = (caddr_t)(-1); 1037 int res; 1038 int watched; 1039 1040 /* prevent recursive calls to pr_watch_emul() */ 1041 ASSERT(!(curthread->t_flag & T_WATCHPT)); 1042 curthread->t_flag |= T_WATCHPT; 1043 1044 watched = watch_disable_addr(addr, 16, rw); 1045 res = do_unaligned(rp, &badaddr); 1046 if (watched) 1047 watch_enable_addr(addr, 16, rw); 1048 1049 curthread->t_flag &= ~T_WATCHPT; 1050 if (res == SIMU_SUCCESS) { 1051 rp->r_pc = rp->r_npc; 1052 rp->r_npc += 4; 1053 return (1); 1054 } 1055 return (0); 1056 } 1057