xref: /illumos-gate/usr/src/uts/intel/io/hotplug/pcicfg/pcicfg.c (revision 915894ef19890baaed00080f85f6b69e225cda98)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright (c) 1999, 2010, Oracle and/or its affiliates. All rights reserved.
23  * Copyright (c) 2019, Joyent, Inc.
24  */
25 
26 /*
27  *     PCI configurator (pcicfg)
28  */
29 
30 #include <sys/sysmacros.h>
31 #include <sys/conf.h>
32 #include <sys/kmem.h>
33 #include <sys/debug.h>
34 #include <sys/modctl.h>
35 #include <sys/autoconf.h>
36 #include <sys/hwconf.h>
37 #include <sys/pcie.h>
38 #include <sys/pcie_impl.h>
39 #include <sys/pci_cap.h>
40 #include <sys/ddi.h>
41 #include <sys/sunndi.h>
42 #include <sys/hotplug/pci/pcicfg.h>
43 #include <sys/ndi_impldefs.h>
44 #include <sys/pci_cfgacc.h>
45 #include <sys/pcie_impl.h>
46 
47 /*
48  * ************************************************************************
49  * *** Implementation specific local data structures/definitions.	***
50  * ************************************************************************
51  */
52 
53 static	int	pcicfg_start_devno = 0;	/* for Debug only */
54 
55 #define	PCICFG_MAX_ARI_FUNCTION 256
56 
57 #define	PCICFG_NODEVICE 42
58 #define	PCICFG_NOMEMORY 43
59 #define	PCICFG_NOMULTI	44
60 #define	PCICFG_NORESRC	45
61 
62 #define	PCICFG_HIADDR(n) ((uint32_t)(((uint64_t)(n) & \
63 	0xFFFFFFFF00000000ULL)>> 32))
64 #define	PCICFG_LOADDR(n) ((uint32_t)((uint64_t)(n) & 0x00000000FFFFFFFF))
65 #define	PCICFG_LADDR(lo, hi)	(((uint64_t)(hi) << 32) | (uint32_t)(lo))
66 
67 #define	PCICFG_HIWORD(n) ((uint16_t)(((uint32_t)(n) & 0xFFFF0000)>> 16))
68 #define	PCICFG_LOWORD(n) ((uint16_t)((uint32_t)(n) & 0x0000FFFF))
69 #define	PCICFG_HIBYTE(n) ((uint8_t)(((uint16_t)(n) & 0xFF00)>> 8))
70 #define	PCICFG_LOBYTE(n) ((uint8_t)((uint16_t)(n) & 0x00FF))
71 
72 #define	PCICFG_ROUND_UP(addr, gran) ((uintptr_t)((gran+addr-1)&(~(gran-1))))
73 #define	PCICFG_ROUND_DOWN(addr, gran) ((uintptr_t)((addr) & ~(gran-1)))
74 
75 #define	PCICFG_MEMGRAN 0x100000
76 #define	PCICFG_IOGRAN 0x1000
77 #define	PCICFG_4GIG_LIMIT 0xFFFFFFFFUL
78 
79 #define	PCICFG_MEM_MULT 4
80 #define	PCICFG_IO_MULT 4
81 #define	PCICFG_RANGE_LEN 3 /* Number of range entries */
82 
83 static int pcicfg_slot_busnums = 8;
84 static int pcicfg_slot_memsize = 32 * PCICFG_MEMGRAN; /* 32MB per slot */
85 static int pcicfg_slot_pf_memsize = 32 * PCICFG_MEMGRAN; /* 32MB per slot */
86 static int pcicfg_slot_iosize = 64 * PCICFG_IOGRAN; /* 64K per slot */
87 static int pcicfg_sec_reset_delay = 3000000;
88 static int pcicfg_do_legacy_props = 1;	/* create legacy compatible prop */
89 
90 typedef struct hole hole_t;
91 
92 struct hole {
93 	uint64_t	start;
94 	uint64_t	len;
95 	hole_t		*next;
96 };
97 
98 typedef struct pcicfg_phdl pcicfg_phdl_t;
99 
100 struct pcicfg_phdl {
101 
102 	dev_info_t	*dip;		/* Associated with the bridge */
103 	dev_info_t	*top_dip;	/* top node of the attach point */
104 	pcicfg_phdl_t	*next;
105 
106 	/* non-prefetchable memory space */
107 	uint64_t	memory_base;	/* Memory base for this attach point */
108 	uint64_t	memory_last;
109 	uint64_t	memory_len;
110 
111 	/* prefetchable memory space */
112 	uint64_t	pf_memory_base;	/* PF Memory base for this Connection */
113 	uint64_t	pf_memory_last;
114 	uint64_t	pf_memory_len;
115 
116 	/* io space */
117 	uint32_t	io_base;	/* I/O base for this attach point */
118 	uint32_t	io_last;
119 	uint32_t	io_len;
120 
121 	int		error;
122 	uint_t		highest_bus;	/* Highest bus seen on the probe */
123 
124 	hole_t		mem_hole;	/* Memory hole linked list. */
125 	hole_t		pf_mem_hole;	/* PF Memory hole linked list. */
126 	hole_t		io_hole;	/* IO hole linked list */
127 
128 	ndi_ra_request_t mem_req;	/* allocator request for memory */
129 	ndi_ra_request_t pf_mem_req;	/* allocator request for PF memory */
130 	ndi_ra_request_t io_req;	/* allocator request for I/O */
131 };
132 
133 struct pcicfg_standard_prop_entry {
134     uchar_t *name;
135     uint_t  config_offset;
136     uint_t  size;
137 };
138 
139 
140 struct pcicfg_name_entry {
141     uint32_t class_code;
142     char  *name;
143 };
144 
145 struct pcicfg_find_ctrl {
146 	uint_t		device;
147 	uint_t		function;
148 	dev_info_t	*dip;
149 };
150 
151 /*
152  * List of Indirect Config Map Devices. At least the intent of the
153  * design is to look for a device in this list during the configure
154  * operation, and if the device is listed here, then it is a nontransparent
155  * bridge, hence load the driver and avail the config map services from
156  * the driver. Class and Subclass should be as defined in the PCI specs
157  * ie. class is 0x6, and subclass is 0x9.
158  */
159 static struct {
160 	uint8_t		mem_range_bar_offset;
161 	uint8_t		io_range_bar_offset;
162 	uint8_t		prefetch_mem_range_bar_offset;
163 } pcicfg_indirect_map_devs[] = {
164 	PCI_CONF_BASE3, PCI_CONF_BASE2, PCI_CONF_BASE3,
165 	0,	0,	0,
166 };
167 
168 #define	PCICFG_MAKE_REG_HIGH(busnum, devnum, funcnum, register)\
169 	(\
170 	((ulong_t)(busnum & 0xff) << 16)    |\
171 	((ulong_t)(devnum & 0x1f) << 11)    |\
172 	((ulong_t)(funcnum & 0x7) <<  8)    |\
173 	((ulong_t)(register & 0x3f)))
174 
175 /*
176  * debug macros:
177  */
178 #if	defined(DEBUG)
179 extern void prom_printf(const char *, ...);
180 
181 /*
182  * Following values are defined for this debug flag.
183  *
184  * 1 = dump configuration header only.
185  * 2 = dump generic debug data only (no config header dumped)
186  * 3 = dump everything (both 1 and 2)
187  */
188 int pcicfg_debug = 0;
189 
190 static void debug(char *, uintptr_t, uintptr_t,
191 	uintptr_t, uintptr_t, uintptr_t);
192 
193 #define	DEBUG0(fmt)\
194 	debug(fmt, 0, 0, 0, 0, 0);
195 #define	DEBUG1(fmt, a1)\
196 	debug(fmt, (uintptr_t)(a1), 0, 0, 0, 0);
197 #define	DEBUG2(fmt, a1, a2)\
198 	debug(fmt, (uintptr_t)(a1), (uintptr_t)(a2), 0, 0, 0);
199 #define	DEBUG3(fmt, a1, a2, a3)\
200 	debug(fmt, (uintptr_t)(a1), (uintptr_t)(a2),\
201 		(uintptr_t)(a3), 0, 0);
202 #define	DEBUG4(fmt, a1, a2, a3, a4)\
203 	debug(fmt, (uintptr_t)(a1), (uintptr_t)(a2),\
204 		(uintptr_t)(a3), (uintptr_t)(a4), 0);
205 #define	DEBUG5(fmt, a1, a2, a3, a4, a5)\
206 	debug(fmt, (uintptr_t)(a1), (uintptr_t)(a2),\
207 		(uintptr_t)(a3), (uintptr_t)(a4), (uintptr_t)(a5));
208 #else
209 #define	DEBUG0(fmt)
210 #define	DEBUG1(fmt, a1)
211 #define	DEBUG2(fmt, a1, a2)
212 #define	DEBUG3(fmt, a1, a2, a3)
213 #define	DEBUG4(fmt, a1, a2, a3, a4)
214 #define	DEBUG5(fmt, a1, a2, a3, a4, a5)
215 #endif
216 
217 /*
218  * forward declarations for routines defined in this module (called here)
219  */
220 
221 static int pcicfg_add_config_reg(dev_info_t *,
222     uint_t, uint_t, uint_t);
223 static int pcicfg_probe_children(dev_info_t *, uint_t, uint_t, uint_t,
224     uint_t *, pcicfg_flags_t, boolean_t);
225 static int pcicfg_match_dev(dev_info_t *, void *);
226 static dev_info_t *pcicfg_devi_find(dev_info_t *, uint_t, uint_t);
227 static pcicfg_phdl_t *pcicfg_find_phdl(dev_info_t *);
228 static pcicfg_phdl_t *pcicfg_create_phdl(dev_info_t *);
229 static int pcicfg_destroy_phdl(dev_info_t *);
230 static int pcicfg_sum_resources(dev_info_t *, void *);
231 static int pcicfg_device_assign(dev_info_t *);
232 static int pcicfg_bridge_assign(dev_info_t *, void *);
233 static int pcicfg_device_assign_readonly(dev_info_t *);
234 static int pcicfg_free_resources(dev_info_t *, pcicfg_flags_t);
235 static void pcicfg_setup_bridge(pcicfg_phdl_t *, ddi_acc_handle_t);
236 static void pcicfg_update_bridge(pcicfg_phdl_t *, ddi_acc_handle_t);
237 static int pcicfg_update_assigned_prop(dev_info_t *, pci_regspec_t *);
238 static void pcicfg_device_on(ddi_acc_handle_t);
239 static void pcicfg_device_off(ddi_acc_handle_t);
240 static int pcicfg_set_busnode_props(dev_info_t *, uint8_t);
241 static int pcicfg_free_bridge_resources(dev_info_t *);
242 static int pcicfg_free_device_resources(dev_info_t *);
243 static int pcicfg_teardown_device(dev_info_t *, pcicfg_flags_t, boolean_t);
244 static void pcicfg_reparent_node(dev_info_t *, dev_info_t *);
245 static int pcicfg_config_setup(dev_info_t *, ddi_acc_handle_t *);
246 static void pcicfg_config_teardown(ddi_acc_handle_t *);
247 static void pcicfg_get_mem(pcicfg_phdl_t *, uint32_t, uint64_t *);
248 static void pcicfg_get_pf_mem(pcicfg_phdl_t *, uint32_t, uint64_t *);
249 static void pcicfg_get_io(pcicfg_phdl_t *, uint32_t, uint32_t *);
250 static int pcicfg_update_ranges_prop(dev_info_t *, ppb_ranges_t *);
251 static int pcicfg_configure_ntbridge(dev_info_t *, uint_t, uint_t);
252 static uint_t pcicfg_ntbridge_child(dev_info_t *);
253 static uint_t pcicfg_get_ntbridge_child_range(dev_info_t *, uint64_t *,
254     uint64_t *, uint_t);
255 static int pcicfg_is_ntbridge(dev_info_t *);
256 static int pcicfg_ntbridge_allocate_resources(dev_info_t *);
257 static int pcicfg_ntbridge_configure_done(dev_info_t *);
258 static int pcicfg_ntbridge_program_child(dev_info_t *);
259 static uint_t pcicfg_ntbridge_unconfigure(dev_info_t *);
260 static int pcicfg_ntbridge_unconfigure_child(dev_info_t *, uint_t);
261 static void pcicfg_free_hole(hole_t *);
262 static uint64_t pcicfg_alloc_hole(hole_t *, uint64_t *, uint32_t);
263 static int pcicfg_device_type(dev_info_t *, ddi_acc_handle_t *);
264 static void pcicfg_update_phdl(dev_info_t *, uint8_t, uint8_t);
265 static int pcicfg_get_cap(ddi_acc_handle_t, uint8_t);
266 static uint8_t pcicfg_get_nslots(dev_info_t *, ddi_acc_handle_t);
267 static int pcicfg_pcie_dev(dev_info_t *, ddi_acc_handle_t);
268 static int pcicfg_pcie_device_type(dev_info_t *, ddi_acc_handle_t);
269 static int pcicfg_pcie_port_type(dev_info_t *, ddi_acc_handle_t);
270 static int pcicfg_probe_bridge(dev_info_t *, ddi_acc_handle_t, uint_t,
271 	uint_t *, boolean_t);
272 static int pcicfg_find_resource_end(dev_info_t *, void *);
273 static boolean_t is_pcie_fabric(dev_info_t *);
274 
275 static int pcicfg_populate_reg_props(dev_info_t *, ddi_acc_handle_t);
276 static int pcicfg_populate_props_from_bar(dev_info_t *, ddi_acc_handle_t);
277 static int pcicfg_update_assigned_prop_value(dev_info_t *, uint32_t,
278     uint32_t, uint32_t, uint_t);
279 static int pcicfg_ari_configure(dev_info_t *);
280 
281 #ifdef DEBUG
282 static void pcicfg_dump_common_config(ddi_acc_handle_t config_handle);
283 static void pcicfg_dump_device_config(ddi_acc_handle_t);
284 static void pcicfg_dump_bridge_config(ddi_acc_handle_t config_handle);
285 static uint64_t pcicfg_unused_space(hole_t *, uint32_t *);
286 
287 #define	PCICFG_DUMP_COMMON_CONFIG(hdl) (void)pcicfg_dump_common_config(hdl)
288 #define	PCICFG_DUMP_DEVICE_CONFIG(hdl) (void)pcicfg_dump_device_config(hdl)
289 #define	PCICFG_DUMP_BRIDGE_CONFIG(hdl) (void)pcicfg_dump_bridge_config(hdl)
290 #else
291 #define	PCICFG_DUMP_COMMON_CONFIG(handle)
292 #define	PCICFG_DUMP_DEVICE_CONFIG(handle)
293 #define	PCICFG_DUMP_BRIDGE_CONFIG(handle)
294 #endif
295 
296 static kmutex_t pcicfg_list_mutex; /* Protects the probe handle list */
297 static pcicfg_phdl_t *pcicfg_phdl_list = NULL;
298 
299 #ifndef _DONT_USE_1275_GENERIC_NAMES
300 /*
301  * Class code table
302  */
303 static struct pcicfg_name_entry pcicfg_class_lookup [] = {
304 
305 	{ 0x001, "display" },
306 	{ 0x100, "scsi" },
307 	{ 0x101, "ide" },
308 	{ 0x102, "fdc" },
309 	{ 0x103, "ipi" },
310 	{ 0x104, "raid" },
311 	{ 0x105, "ata" },
312 	{ 0x106, "sata" },
313 	{ 0x200, "ethernet" },
314 	{ 0x201, "token-ring" },
315 	{ 0x202, "fddi" },
316 	{ 0x203, "atm" },
317 	{ 0x204, "isdn" },
318 	{ 0x206, "mcd" },
319 	{ 0x300, "display" },
320 	{ 0x400, "video" },
321 	{ 0x401, "sound" },
322 	{ 0x500, "memory" },
323 	{ 0x501, "flash" },
324 	{ 0x600, "host" },
325 	{ 0x601, "isa" },
326 	{ 0x602, "eisa" },
327 	{ 0x603, "mca" },
328 	{ 0x604, "pci" },
329 	{ 0x605, "pcmcia" },
330 	{ 0x606, "nubus" },
331 	{ 0x607, "cardbus" },
332 	{ 0x609, "pci" },
333 	{ 0x60a, "ib-pci" },
334 	{ 0x700, "serial" },
335 	{ 0x701, "parallel" },
336 	{ 0x800, "interrupt-controller" },
337 	{ 0x801, "dma-controller" },
338 	{ 0x802, "timer" },
339 	{ 0x803, "rtc" },
340 	{ 0x900, "keyboard" },
341 	{ 0x901, "pen" },
342 	{ 0x902, "mouse" },
343 	{ 0xa00, "dock" },
344 	{ 0xb00, "cpu" },
345 	{ 0xb01, "cpu" },
346 	{ 0xb02, "cpu" },
347 	{ 0xb10, "cpu" },
348 	{ 0xb20, "cpu" },
349 	{ 0xb30, "cpu" },
350 	{ 0xb40, "coproc" },
351 	{ 0xc00, "firewire" },
352 	{ 0xc01, "access-bus" },
353 	{ 0xc02, "ssa" },
354 	{ 0xc03, "usb" },
355 	{ 0xc04, "fibre-channel" },
356 	{ 0xc05, "smbus" },
357 	{ 0xc06, "ib" },
358 	{ 0xd00, "irda" },
359 	{ 0xd01, "ir" },
360 	{ 0xd10, "rf" },
361 	{ 0xd11, "btooth" },
362 	{ 0xd12, "brdband" },
363 	{ 0xd20, "802.11a" },
364 	{ 0xd21, "802.11b" },
365 	{ 0xe00, "i2o" },
366 	{ 0xf01, "tv" },
367 	{ 0xf02, "audio" },
368 	{ 0xf03, "voice" },
369 	{ 0xf04, "data" },
370 	{ 0, 0 }
371 };
372 #endif /* _DONT_USE_1275_GENERIC_NAMES */
373 
374 /*
375  * Module control operations
376  */
377 
378 extern struct mod_ops mod_miscops;
379 
380 static struct modlmisc modlmisc = {
381 	&mod_miscops, /* Type of module */
382 	"PCI configurator"
383 };
384 
385 static struct modlinkage modlinkage = {
386 	MODREV_1, (void *)&modlmisc, NULL
387 };
388 
389 
390 #ifdef DEBUG
391 
392 static void
393 pcicfg_dump_common_config(ddi_acc_handle_t config_handle)
394 {
395 	if ((pcicfg_debug & 1) == 0)
396 		return;
397 	prom_printf(" Vendor ID   = [0x%x]\n",
398 	    pci_config_get16(config_handle, PCI_CONF_VENID));
399 	prom_printf(" Device ID   = [0x%x]\n",
400 	    pci_config_get16(config_handle, PCI_CONF_DEVID));
401 	prom_printf(" Command REG = [0x%x]\n",
402 	    pci_config_get16(config_handle, PCI_CONF_COMM));
403 	prom_printf(" Status  REG = [0x%x]\n",
404 	    pci_config_get16(config_handle, PCI_CONF_STAT));
405 	prom_printf(" Revision ID = [0x%x]\n",
406 	    pci_config_get8(config_handle, PCI_CONF_REVID));
407 	prom_printf(" Prog Class  = [0x%x]\n",
408 	    pci_config_get8(config_handle, PCI_CONF_PROGCLASS));
409 	prom_printf(" Dev Class   = [0x%x]\n",
410 	    pci_config_get8(config_handle, PCI_CONF_SUBCLASS));
411 	prom_printf(" Base Class  = [0x%x]\n",
412 	    pci_config_get8(config_handle, PCI_CONF_BASCLASS));
413 	prom_printf(" Device ID   = [0x%x]\n",
414 	    pci_config_get8(config_handle, PCI_CONF_CACHE_LINESZ));
415 	prom_printf(" Header Type = [0x%x]\n",
416 	    pci_config_get8(config_handle, PCI_CONF_HEADER));
417 	prom_printf(" BIST        = [0x%x]\n",
418 	    pci_config_get8(config_handle, PCI_CONF_BIST));
419 	prom_printf(" BASE 0      = [0x%x]\n",
420 	    pci_config_get32(config_handle, PCI_CONF_BASE0));
421 	prom_printf(" BASE 1      = [0x%x]\n",
422 	    pci_config_get32(config_handle, PCI_CONF_BASE1));
423 
424 }
425 
426 static void
427 pcicfg_dump_device_config(ddi_acc_handle_t config_handle)
428 {
429 	if ((pcicfg_debug & 1) == 0)
430 		return;
431 	pcicfg_dump_common_config(config_handle);
432 
433 	prom_printf(" BASE 2      = [0x%x]\n",
434 	    pci_config_get32(config_handle, PCI_CONF_BASE2));
435 	prom_printf(" BASE 3      = [0x%x]\n",
436 	    pci_config_get32(config_handle, PCI_CONF_BASE3));
437 	prom_printf(" BASE 4      = [0x%x]\n",
438 	    pci_config_get32(config_handle, PCI_CONF_BASE4));
439 	prom_printf(" BASE 5      = [0x%x]\n",
440 	    pci_config_get32(config_handle, PCI_CONF_BASE5));
441 	prom_printf(" Cardbus CIS = [0x%x]\n",
442 	    pci_config_get32(config_handle, PCI_CONF_CIS));
443 	prom_printf(" Sub VID     = [0x%x]\n",
444 	    pci_config_get16(config_handle, PCI_CONF_SUBVENID));
445 	prom_printf(" Sub SID     = [0x%x]\n",
446 	    pci_config_get16(config_handle, PCI_CONF_SUBSYSID));
447 	prom_printf(" ROM         = [0x%x]\n",
448 	    pci_config_get32(config_handle, PCI_CONF_ROM));
449 	prom_printf(" I Line      = [0x%x]\n",
450 	    pci_config_get8(config_handle, PCI_CONF_ILINE));
451 	prom_printf(" I Pin       = [0x%x]\n",
452 	    pci_config_get8(config_handle, PCI_CONF_IPIN));
453 	prom_printf(" Max Grant   = [0x%x]\n",
454 	    pci_config_get8(config_handle, PCI_CONF_MIN_G));
455 	prom_printf(" Max Latent  = [0x%x]\n",
456 	    pci_config_get8(config_handle, PCI_CONF_MAX_L));
457 }
458 
459 static void
460 pcicfg_dump_bridge_config(ddi_acc_handle_t config_handle)
461 {
462 	if ((pcicfg_debug & 1) == 0)
463 		return;
464 	pcicfg_dump_common_config(config_handle);
465 
466 	prom_printf("........................................\n");
467 
468 	prom_printf(" Pri Bus     = [0x%x]\n",
469 	    pci_config_get8(config_handle, PCI_BCNF_PRIBUS));
470 	prom_printf(" Sec Bus     = [0x%x]\n",
471 	    pci_config_get8(config_handle, PCI_BCNF_SECBUS));
472 	prom_printf(" Sub Bus     = [0x%x]\n",
473 	    pci_config_get8(config_handle, PCI_BCNF_SUBBUS));
474 	prom_printf(" Latency     = [0x%x]\n",
475 	    pci_config_get8(config_handle, PCI_BCNF_LATENCY_TIMER));
476 	prom_printf(" I/O Base LO = [0x%x]\n",
477 	    pci_config_get8(config_handle, PCI_BCNF_IO_BASE_LOW));
478 	prom_printf(" I/O Lim LO  = [0x%x]\n",
479 	    pci_config_get8(config_handle, PCI_BCNF_IO_LIMIT_LOW));
480 	prom_printf(" Sec. Status = [0x%x]\n",
481 	    pci_config_get16(config_handle, PCI_BCNF_SEC_STATUS));
482 	prom_printf(" Mem Base    = [0x%x]\n",
483 	    pci_config_get16(config_handle, PCI_BCNF_MEM_BASE));
484 	prom_printf(" Mem Limit   = [0x%x]\n",
485 	    pci_config_get16(config_handle, PCI_BCNF_MEM_LIMIT));
486 	prom_printf(" PF Mem Base = [0x%x]\n",
487 	    pci_config_get16(config_handle, PCI_BCNF_PF_BASE_LOW));
488 	prom_printf(" PF Mem Lim  = [0x%x]\n",
489 	    pci_config_get16(config_handle, PCI_BCNF_PF_LIMIT_LOW));
490 	prom_printf(" PF Base HI  = [0x%x]\n",
491 	    pci_config_get32(config_handle, PCI_BCNF_PF_BASE_HIGH));
492 	prom_printf(" PF Lim  HI  = [0x%x]\n",
493 	    pci_config_get32(config_handle, PCI_BCNF_PF_LIMIT_HIGH));
494 	prom_printf(" I/O Base HI = [0x%x]\n",
495 	    pci_config_get16(config_handle, PCI_BCNF_IO_BASE_HI));
496 	prom_printf(" I/O Lim HI  = [0x%x]\n",
497 	    pci_config_get16(config_handle, PCI_BCNF_IO_LIMIT_HI));
498 	prom_printf(" ROM addr    = [0x%x]\n",
499 	    pci_config_get32(config_handle, PCI_BCNF_ROM));
500 	prom_printf(" Intr Line   = [0x%x]\n",
501 	    pci_config_get8(config_handle, PCI_BCNF_ILINE));
502 	prom_printf(" Intr Pin    = [0x%x]\n",
503 	    pci_config_get8(config_handle, PCI_BCNF_IPIN));
504 	prom_printf(" Bridge Ctrl = [0x%x]\n",
505 	    pci_config_get16(config_handle, PCI_BCNF_BCNTRL));
506 }
507 #endif
508 
509 int
510 _init()
511 {
512 	DEBUG0(" PCI configurator installed\n");
513 	mutex_init(&pcicfg_list_mutex, NULL, MUTEX_DRIVER, NULL);
514 	return (mod_install(&modlinkage));
515 }
516 
517 int
518 _fini(void)
519 {
520 	int error;
521 
522 	error = mod_remove(&modlinkage);
523 	if (error != 0) {
524 		return (error);
525 	}
526 	mutex_destroy(&pcicfg_list_mutex);
527 	return (0);
528 }
529 
530 int
531 _info(struct modinfo *modinfop)
532 {
533 	return (mod_info(&modlinkage, modinfop));
534 }
535 
536 /*
537  * In the following functions ndi_devi_enter() without holding the
538  * parent dip is sufficient. This is because  pci dr is driven through
539  * opens on the nexus which is in the device tree path above the node
540  * being operated on, and implicitly held due to the open.
541  */
542 
543 /*
544  * This entry point is called to configure a device (and
545  * all its children) on the given bus. It is called when
546  * a new device is added to the PCI domain.  This routine
547  * will create the device tree and program the devices
548  * registers.
549  */
550 int
551 pcicfg_configure(dev_info_t *devi, uint_t device, uint_t function,
552     pcicfg_flags_t flags)
553 {
554 	uint_t bus;
555 	int len;
556 	int func;
557 	dev_info_t *attach_point;
558 	pci_bus_range_t pci_bus_range;
559 	int rv;
560 	int circ;
561 	uint_t highest_bus, visited = 0;
562 	int ari_mode = B_FALSE;
563 	int max_function = PCI_MAX_FUNCTIONS;
564 	int trans_device;
565 	dev_info_t *new_device;
566 	boolean_t is_pcie;
567 
568 	if (flags == PCICFG_FLAG_ENABLE_ARI)
569 		return (pcicfg_ari_configure(devi));
570 
571 	/*
572 	 * Start probing at the device specified in "device" on the
573 	 * "bus" specified.
574 	 */
575 	len = sizeof (pci_bus_range_t);
576 	if (ddi_getlongprop_buf(DDI_DEV_T_ANY, devi, 0, "bus-range",
577 	    (caddr_t)&pci_bus_range, &len) != DDI_SUCCESS) {
578 		DEBUG0("no bus-range property\n");
579 		return (PCICFG_FAILURE);
580 	}
581 
582 	bus = pci_bus_range.lo; /* primary bus number of this bus node */
583 
584 	attach_point = devi;
585 
586 	is_pcie = is_pcie_fabric(devi);
587 
588 	ndi_devi_enter(devi, &circ);
589 	for (func = 0; func < max_function; ) {
590 
591 		if ((function != PCICFG_ALL_FUNC) && (function != func))
592 			goto next;
593 
594 		if (ari_mode)
595 			trans_device = func >> 3;
596 		else
597 			trans_device = device;
598 
599 		switch (rv = pcicfg_probe_children(attach_point,
600 		    bus, trans_device, func & 7, &highest_bus,
601 		    flags, is_pcie)) {
602 			case PCICFG_NORESRC:
603 			case PCICFG_FAILURE:
604 				DEBUG2("configure failed: bus [0x%x] device "
605 				    "[0x%x]\n", bus, trans_device);
606 				goto cleanup;
607 			case PCICFG_NODEVICE:
608 				DEBUG3("no device : bus "
609 				    "[0x%x] slot [0x%x] func [0x%x]\n",
610 				    bus, trans_device, func &7);
611 
612 				/*
613 				 * When walking the list of ARI functions
614 				 * we don't expect to see a non-present
615 				 * function, so we will stop walking
616 				 * the function list.
617 				 */
618 				if (ari_mode == B_TRUE)
619 					break;
620 
621 				if (func)
622 					goto next;
623 				break;
624 			default:
625 				DEBUG3("configure: bus => [%d] "
626 				    "slot => [%d] func => [%d]\n",
627 				    bus, trans_device, func & 7);
628 			break;
629 		}
630 
631 		if (rv != PCICFG_SUCCESS)
632 			break;
633 
634 		if ((new_device = pcicfg_devi_find(attach_point,
635 		    trans_device, func & 7)) == NULL) {
636 			DEBUG0("Did'nt find device node just created\n");
637 			goto cleanup;
638 		}
639 
640 		/*
641 		 * Up until now, we have detected a non transparent bridge
642 		 * (ntbridge) as a part of the generic probe code and
643 		 * configured only one configuration
644 		 * header which is the side facing the host bus.
645 		 * Now, configure the other side and create children.
646 		 *
647 		 * In order to make the process simpler, lets load the device
648 		 * driver for the non transparent bridge as this is a
649 		 * Solaris bundled driver, and use its configuration map
650 		 * services rather than programming it here.
651 		 * If the driver is not bundled into Solaris, it must be
652 		 * first loaded and configured before performing any
653 		 * hotplug operations.
654 		 *
655 		 * This not only makes the code here simpler but also more
656 		 * generic.
657 		 *
658 		 * So here we go.
659 		 */
660 
661 		/*
662 		 * check if this is a bridge in nontransparent mode
663 		 */
664 		if (pcicfg_is_ntbridge(new_device) != DDI_FAILURE) {
665 			DEBUG0("pcicfg: Found nontransparent bridge.\n");
666 
667 			rv = pcicfg_configure_ntbridge(new_device, bus,
668 			    trans_device);
669 			if (rv != PCICFG_SUCCESS)
670 				goto cleanup;
671 		}
672 
673 		/*
674 		 * Note that we've successfully gone through and visited at
675 		 * least one node.
676 		 */
677 		visited++;
678 next:
679 		/*
680 		 * Determine if ARI Forwarding should be enabled.
681 		 */
682 		if (func == 0) {
683 			if ((pcie_ari_supported(devi)
684 			    == PCIE_ARI_FORW_SUPPORTED) &&
685 			    (pcie_ari_device(new_device) == PCIE_ARI_DEVICE)) {
686 				if (pcie_ari_enable(devi) == DDI_SUCCESS) {
687 					(void) ddi_prop_create(DDI_DEV_T_NONE,
688 					    devi,  DDI_PROP_CANSLEEP,
689 					    "ari-enabled", NULL, 0);
690 
691 					ari_mode = B_TRUE;
692 					max_function = PCICFG_MAX_ARI_FUNCTION;
693 				}
694 			}
695 		}
696 		if (ari_mode == B_TRUE) {
697 			int next_function;
698 
699 			DEBUG0("Next Function - ARI Device\n");
700 			if (pcie_ari_get_next_function(new_device,
701 			    &next_function) != DDI_SUCCESS)
702 				goto cleanup;
703 
704 			/*
705 			 * Check if there are more functions to probe.
706 			 */
707 			if (next_function == 0) {
708 				DEBUG0("Next Function - "
709 				    "No more ARI Functions\n");
710 				break;
711 			}
712 			func = next_function;
713 		} else {
714 			func++;
715 		}
716 		DEBUG1("Next Function - %x\n", func);
717 	}
718 
719 	ndi_devi_exit(devi, circ);
720 
721 	if (visited == 0)
722 		return (PCICFG_FAILURE);	/* probe failed */
723 	else
724 		return (PCICFG_SUCCESS);
725 
726 cleanup:
727 	/*
728 	 * Clean up a partially created "probe state" tree.
729 	 * There are no resources allocated to the in the
730 	 * probe state.
731 	 */
732 
733 	for (func = 0; func < PCI_MAX_FUNCTIONS; func++) {
734 		if ((function != PCICFG_ALL_FUNC) && (function != func))
735 			continue;
736 
737 		if ((new_device = pcicfg_devi_find(devi, device, func))
738 		    == NULL) {
739 			continue;
740 		}
741 
742 		DEBUG2("Cleaning up device [0x%x] function [0x%x]\n",
743 		    device, func);
744 		/*
745 		 * If this was a bridge device it will have a
746 		 * probe handle - if not, no harm in calling this.
747 		 */
748 		(void) pcicfg_destroy_phdl(new_device);
749 		if (is_pcie) {
750 			/*
751 			 * free pcie_bus_t for the sub-tree
752 			 */
753 			if (ddi_get_child(new_device) != NULL)
754 				pcie_fab_fini_bus(new_device, PCIE_BUS_ALL);
755 
756 			pcie_fini_bus(new_device, PCIE_BUS_ALL);
757 		}
758 		/*
759 		 * This will free up the node
760 		 */
761 		(void) ndi_devi_offline(new_device, NDI_DEVI_REMOVE);
762 	}
763 	ndi_devi_exit(devi, circ);
764 
765 	/*
766 	 * Use private return codes to help identify issues without debugging
767 	 * enabled.  Resource limitations and mis-configurations are
768 	 * probably the most likely caue of configuration failures on x86.
769 	 * Convert return code back to values expected by the external
770 	 * consumer before returning so we will warn only once on the first
771 	 * encountered failure.
772 	 */
773 	if (rv == PCICFG_NORESRC) {
774 		char *path = kmem_alloc(MAXPATHLEN, KM_SLEEP);
775 
776 		(void) ddi_pathname(devi, path);
777 		cmn_err(CE_CONT, "?Not enough PCI resources to "
778 		    "configure: %s\n", path);
779 
780 		kmem_free(path, MAXPATHLEN);
781 		rv = PCICFG_FAILURE;
782 	}
783 
784 	return (rv);
785 }
786 
787 /*
788  * configure the child nodes of ntbridge. new_device points to ntbridge itself
789  */
790 /*ARGSUSED*/
791 static int
792 pcicfg_configure_ntbridge(dev_info_t *new_device, uint_t bus, uint_t device)
793 {
794 	int bus_range[2], rc = PCICFG_FAILURE, rc1, max_devs = 0;
795 	int			devno;
796 	dev_info_t		*new_ntbridgechild;
797 	ddi_acc_handle_t	config_handle;
798 	uint16_t		vid;
799 	uint64_t		next_bus;
800 	uint64_t		blen;
801 	ndi_ra_request_t	req;
802 	uint8_t			pcie_device_type = 0;
803 
804 	/*
805 	 * If we need to do indirect config, lets create a property here
806 	 * to let the child conf map routine know that it has to
807 	 * go through the DDI calls, and not assume the devices are
808 	 * mapped directly under the host.
809 	 */
810 	if ((rc = ndi_prop_update_int(DDI_DEV_T_NONE, new_device,
811 	    PCI_DEV_CONF_MAP_PROP, (int)DDI_SUCCESS)) != DDI_SUCCESS) {
812 		DEBUG0("Cannot create indirect conf map property.\n");
813 		return ((int)PCICFG_FAILURE);
814 	}
815 
816 	if (pci_config_setup(new_device, &config_handle) != DDI_SUCCESS)
817 		return (PCICFG_FAILURE);
818 	/* check if we are PCIe device */
819 	if (pcicfg_pcie_device_type(new_device, config_handle) == DDI_SUCCESS) {
820 		DEBUG0("PCIe device detected\n");
821 		pcie_device_type = 1;
822 	}
823 	pci_config_teardown(&config_handle);
824 	/* create Bus node properties for ntbridge. */
825 	if (pcicfg_set_busnode_props(new_device, pcie_device_type)
826 	    != PCICFG_SUCCESS) {
827 		DEBUG0("Failed to set busnode props\n");
828 		return (rc);
829 	}
830 
831 	/* For now: Lets only support one layer of child */
832 	bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
833 	req.ra_len = 1;
834 	if (ndi_ra_alloc(ddi_get_parent(new_device), &req, &next_bus, &blen,
835 	    NDI_RA_TYPE_PCI_BUSNUM, NDI_RA_PASS) != NDI_SUCCESS) {
836 		DEBUG0("ntbridge: Failed to get a bus number\n");
837 		return (PCICFG_NORESRC);
838 	}
839 
840 	DEBUG1("ntbridge bus range start  ->[%d]\n", next_bus);
841 
842 	/*
843 	 * Following will change, as we detect more bridges
844 	 * on the way.
845 	 */
846 	bus_range[0] = (int)next_bus;
847 	bus_range[1] = (int)next_bus;
848 
849 	if (ndi_prop_update_int_array(DDI_DEV_T_NONE, new_device, "bus-range",
850 	    bus_range, 2) != DDI_SUCCESS) {
851 		DEBUG0("Cannot set ntbridge bus-range property");
852 		return (rc);
853 	}
854 
855 	/*
856 	 * The other interface (away from the host) will be
857 	 * initialized by the nexus driver when it loads.
858 	 * We just have to set the registers and the nexus driver
859 	 * figures out the rest.
860 	 */
861 
862 	/*
863 	 * finally, lets load and attach the driver
864 	 * before configuring children of ntbridge.
865 	 */
866 	rc = ndi_devi_online(new_device, NDI_ONLINE_ATTACH|NDI_CONFIG);
867 	if (rc != NDI_SUCCESS) {
868 		cmn_err(CE_WARN,
869 		"pcicfg: Fail:cant load nontransparent bridgd driver..\n");
870 		rc = PCICFG_FAILURE;
871 		return (rc);
872 	}
873 	DEBUG0("pcicfg: Success loading nontransparent bridge nexus driver..");
874 
875 	/* Now set aside pci resource allocation requests for our children */
876 	if (pcicfg_ntbridge_allocate_resources(new_device) != PCICFG_SUCCESS) {
877 		max_devs = 0;
878 		rc = PCICFG_FAILURE;
879 	} else
880 		max_devs = PCI_MAX_DEVICES;
881 
882 	/* Probe devices on 2nd bus */
883 	rc = PCICFG_SUCCESS;
884 	for (devno = pcicfg_start_devno; devno < max_devs; devno++) {
885 
886 		ndi_devi_alloc_sleep(new_device, DEVI_PSEUDO_NEXNAME,
887 		    (pnode_t)DEVI_SID_NODEID, &new_ntbridgechild);
888 
889 		if (pcicfg_add_config_reg(new_ntbridgechild, next_bus, devno, 0)
890 		    != DDI_PROP_SUCCESS) {
891 			cmn_err(CE_WARN,
892 			    "Failed to add conf reg for ntbridge child.\n");
893 			(void) ndi_devi_free(new_ntbridgechild);
894 			rc = PCICFG_FAILURE;
895 			break;
896 		}
897 
898 		if (pci_config_setup(new_ntbridgechild, &config_handle)
899 		    != DDI_SUCCESS) {
900 			cmn_err(CE_WARN,
901 			    "Cannot map ntbridge child %x\n", devno);
902 			(void) ndi_devi_free(new_ntbridgechild);
903 			rc = PCICFG_FAILURE;
904 			break;
905 		}
906 
907 		/*
908 		 * See if there is any PCI HW at this location
909 		 * by reading the Vendor ID.  If it returns with 0xffff
910 		 * then there is no hardware at this location.
911 		 */
912 		vid = pci_config_get16(config_handle, PCI_CONF_VENID);
913 
914 		pci_config_teardown(&config_handle);
915 		(void) ndi_devi_free(new_ntbridgechild);
916 		if (vid	== 0xffff)
917 			continue;
918 
919 		/* Lets fake attachments points for each child, */
920 		rc = pcicfg_configure(new_device, devno, PCICFG_ALL_FUNC, 0);
921 		if (rc != PCICFG_SUCCESS) {
922 			int old_dev = pcicfg_start_devno;
923 
924 			cmn_err(CE_WARN,
925 			    "Error configuring ntbridge child dev=%d\n", devno);
926 
927 			while (old_dev != devno) {
928 				if (pcicfg_ntbridge_unconfigure_child(
929 				    new_device, old_dev) == PCICFG_FAILURE)
930 					cmn_err(CE_WARN, "Unconfig Error "
931 					    "ntbridge child dev=%d\n", old_dev);
932 				old_dev++;
933 			}
934 			break;
935 		}
936 	} /* devno loop */
937 	DEBUG1("ntbridge: finish probing 2nd bus, rc=%d\n", rc);
938 
939 	if (rc == PCICFG_SUCCESS)
940 		rc = pcicfg_ntbridge_configure_done(new_device);
941 	else {
942 		pcicfg_phdl_t *entry = pcicfg_find_phdl(new_device);
943 		uint_t			*bus;
944 		int			k;
945 
946 		if (ddi_getlongprop(DDI_DEV_T_ANY, new_device,
947 		    DDI_PROP_DONTPASS, "bus-range", (caddr_t)&bus, &k)
948 		    != DDI_PROP_SUCCESS) {
949 			DEBUG0("Failed to read bus-range property\n");
950 			rc = PCICFG_FAILURE;
951 			return (rc);
952 		}
953 
954 		DEBUG2("Need to free bus [%d] range [%d]\n",
955 		    bus[0], bus[1] - bus[0] + 1);
956 
957 		if (ndi_ra_free(ddi_get_parent(new_device), (uint64_t)bus[0],
958 		    (uint64_t)(bus[1] - bus[0] + 1), NDI_RA_TYPE_PCI_BUSNUM,
959 		    NDI_RA_PASS) != NDI_SUCCESS) {
960 			DEBUG0("Failed to free a bus number\n");
961 			rc = PCICFG_FAILURE;
962 			kmem_free(bus, k);
963 			return (rc);
964 		}
965 
966 		/*
967 		 * Since no memory allocations are done for non transparent
968 		 * bridges (but instead we just set the handle with the
969 		 * already allocated memory, we just need to reset the
970 		 * following values before calling the destroy_phdl()
971 		 * function next, otherwise the it will try to free
972 		 * memory allocated as in case of a transparent bridge.
973 		 */
974 		entry->memory_len = 0;
975 		entry->pf_memory_len = 0;
976 		entry->io_len = 0;
977 		kmem_free(bus, k);
978 		/* the following will free hole data. */
979 		(void) pcicfg_destroy_phdl(new_device);
980 	}
981 
982 	/*
983 	 * Unload driver just in case child configure failed!
984 	 */
985 	rc1 = ndi_devi_offline(new_device, 0);
986 	DEBUG1("pcicfg: now unloading the ntbridge driver. rc1=%d\n", rc1);
987 	if (rc1 != NDI_SUCCESS) {
988 		cmn_err(CE_WARN,
989 		"pcicfg: cant unload ntbridge driver..children.\n");
990 		rc = PCICFG_FAILURE;
991 	}
992 
993 	return (rc);
994 }
995 
996 static int
997 pcicfg_ntbridge_allocate_resources(dev_info_t *dip)
998 {
999 	pcicfg_phdl_t		*phdl;
1000 	ndi_ra_request_t	*mem_request;
1001 	ndi_ra_request_t	*pf_mem_request;
1002 	ndi_ra_request_t	*io_request;
1003 	uint64_t		boundbase, boundlen;
1004 
1005 	phdl = pcicfg_find_phdl(dip);
1006 	ASSERT(phdl);
1007 
1008 	mem_request = &phdl->mem_req;
1009 	pf_mem_request = &phdl->pf_mem_req;
1010 	io_request  = &phdl->io_req;
1011 
1012 	phdl->error = PCICFG_SUCCESS;
1013 
1014 	/* Set Memory space handle for ntbridge */
1015 	if (pcicfg_get_ntbridge_child_range(dip, &boundbase, &boundlen,
1016 	    PCI_BASE_SPACE_MEM) != DDI_SUCCESS) {
1017 		cmn_err(CE_WARN,
1018 		    "ntbridge: Mem resource information failure\n");
1019 		phdl->memory_len  = 0;
1020 		return (PCICFG_FAILURE);
1021 	}
1022 	mem_request->ra_boundbase = boundbase;
1023 	mem_request->ra_boundlen = boundbase + boundlen;
1024 	mem_request->ra_len = boundlen;
1025 	mem_request->ra_align_mask =
1026 	    PCICFG_MEMGRAN - 1; /* 1M alignment on memory space */
1027 	mem_request->ra_flags |= NDI_RA_ALLOC_BOUNDED;
1028 
1029 	/*
1030 	 * mem_request->ra_len =
1031 	 * PCICFG_ROUND_UP(mem_request->ra_len, PCICFG_MEMGRAN);
1032 	 */
1033 
1034 	phdl->memory_base = phdl->memory_last = boundbase;
1035 	phdl->memory_len  = boundlen;
1036 	phdl->mem_hole.start = phdl->memory_base;
1037 	phdl->mem_hole.len = mem_request->ra_len;
1038 	phdl->mem_hole.next = (hole_t *)NULL;
1039 
1040 	DEBUG2("Connector requested [0x%llx], needs [0x%llx] bytes of memory\n",
1041 	    boundlen, mem_request->ra_len);
1042 
1043 	/* Set IO space handle for ntbridge */
1044 	if (pcicfg_get_ntbridge_child_range(dip, &boundbase, &boundlen,
1045 	    PCI_BASE_SPACE_IO) != DDI_SUCCESS) {
1046 		cmn_err(CE_WARN, "ntbridge: IO resource information failure\n");
1047 		phdl->io_len  = 0;
1048 		return (PCICFG_FAILURE);
1049 	}
1050 	io_request->ra_len = boundlen;
1051 	io_request->ra_align_mask =
1052 	    PCICFG_IOGRAN - 1;   /* 4K alignment on I/O space */
1053 	io_request->ra_boundbase = boundbase;
1054 	io_request->ra_boundlen = boundbase + boundlen;
1055 	io_request->ra_flags |= NDI_RA_ALLOC_BOUNDED;
1056 
1057 	/*
1058 	 * io_request->ra_len =
1059 	 * PCICFG_ROUND_UP(io_request->ra_len, PCICFG_IOGRAN);
1060 	 */
1061 
1062 	phdl->io_base = phdl->io_last = (uint32_t)boundbase;
1063 	phdl->io_len  = (uint32_t)boundlen;
1064 	phdl->io_hole.start = phdl->io_base;
1065 	phdl->io_hole.len = io_request->ra_len;
1066 	phdl->io_hole.next = (hole_t *)NULL;
1067 
1068 	DEBUG2("Connector requested [0x%llx], needs [0x%llx] bytes of IO\n",
1069 	    boundlen, io_request->ra_len);
1070 
1071 	/* Set Prefetchable Memory space handle for ntbridge */
1072 	if (pcicfg_get_ntbridge_child_range(dip, &boundbase, &boundlen,
1073 	    PCI_BASE_SPACE_MEM | PCI_BASE_PREF_M) != DDI_SUCCESS) {
1074 		cmn_err(CE_WARN,
1075 		    "ntbridge: PF Mem resource information failure\n");
1076 		phdl->pf_memory_len  = 0;
1077 		return (PCICFG_FAILURE);
1078 	}
1079 	pf_mem_request->ra_boundbase = boundbase;
1080 	pf_mem_request->ra_boundlen = boundbase + boundlen;
1081 	pf_mem_request->ra_len = boundlen;
1082 	pf_mem_request->ra_align_mask =
1083 	    PCICFG_MEMGRAN - 1; /* 1M alignment on memory space */
1084 	pf_mem_request->ra_flags |= NDI_RA_ALLOC_BOUNDED;
1085 
1086 	/*
1087 	 * pf_mem_request->ra_len =
1088 	 * PCICFG_ROUND_UP(pf_mem_request->ra_len, PCICFG_MEMGRAN);
1089 	 */
1090 
1091 	phdl->pf_memory_base = phdl->pf_memory_last = boundbase;
1092 	phdl->pf_memory_len  = boundlen;
1093 	phdl->pf_mem_hole.start = phdl->pf_memory_base;
1094 	phdl->pf_mem_hole.len = pf_mem_request->ra_len;
1095 	phdl->pf_mem_hole.next = (hole_t *)NULL;
1096 
1097 	DEBUG2("Connector requested [0x%llx], needs [0x%llx] bytes of PF "
1098 	    "memory\n", boundlen, pf_mem_request->ra_len);
1099 
1100 	DEBUG2("MEMORY BASE = [0x%lx] length [0x%lx]\n",
1101 	    phdl->memory_base, phdl->memory_len);
1102 	DEBUG2("IO     BASE = [0x%x] length [0x%x]\n",
1103 	    phdl->io_base, phdl->io_len);
1104 	DEBUG2("PF MEMORY BASE = [0x%lx] length [0x%lx]\n",
1105 	    phdl->pf_memory_base, phdl->pf_memory_len);
1106 
1107 	return (PCICFG_SUCCESS);
1108 }
1109 
1110 static int
1111 pcicfg_ntbridge_configure_done(dev_info_t *dip)
1112 {
1113 	ppb_ranges_t range[PCICFG_RANGE_LEN];
1114 	pcicfg_phdl_t		*entry;
1115 	uint_t			len;
1116 	pci_bus_range_t		bus_range;
1117 	int			new_bus_range[2];
1118 
1119 	DEBUG1("Configuring children for %p\n", dip);
1120 
1121 	entry = pcicfg_find_phdl(dip);
1122 	ASSERT(entry);
1123 
1124 	bzero((caddr_t)range, sizeof (ppb_ranges_t) * PCICFG_RANGE_LEN);
1125 	range[1].child_high = range[1].parent_high |=
1126 	    (PCI_REG_REL_M | PCI_ADDR_MEM32);
1127 	range[1].child_low = range[1].parent_low = (uint32_t)entry->memory_base;
1128 
1129 	range[0].child_high = range[0].parent_high |=
1130 	    (PCI_REG_REL_M | PCI_ADDR_IO);
1131 	range[0].child_low = range[0].parent_low = (uint32_t)entry->io_base;
1132 
1133 	range[2].child_high = range[2].parent_high |=
1134 	    (PCI_REG_REL_M | PCI_ADDR_MEM32 | PCI_REG_PF_M);
1135 	range[2].child_low = range[2].parent_low =
1136 	    (uint32_t)entry->pf_memory_base;
1137 
1138 	len = sizeof (pci_bus_range_t);
1139 	if (ddi_getlongprop_buf(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
1140 	    "bus-range", (caddr_t)&bus_range, (int *)&len) != DDI_SUCCESS) {
1141 		DEBUG0("no bus-range property\n");
1142 		return (PCICFG_FAILURE);
1143 	}
1144 
1145 	new_bus_range[0] = bus_range.lo;	/* primary bus number */
1146 	if (entry->highest_bus) {	/* secondary bus number */
1147 		if (entry->highest_bus < bus_range.lo) {
1148 			cmn_err(CE_WARN,
1149 			    "ntbridge bus range invalid !(%d,%d)\n",
1150 			    bus_range.lo, entry->highest_bus);
1151 			new_bus_range[1] = bus_range.lo + entry->highest_bus;
1152 		}
1153 		else
1154 			new_bus_range[1] = entry->highest_bus;
1155 	}
1156 	else
1157 		new_bus_range[1] = bus_range.hi;
1158 
1159 	DEBUG2("ntbridge: bus range lo=%x, hi=%x\n", new_bus_range[0],
1160 	    new_bus_range[1]);
1161 
1162 	if (ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "bus-range",
1163 	    new_bus_range, 2) != DDI_SUCCESS) {
1164 		DEBUG0("Failed to set bus-range property");
1165 		entry->error = PCICFG_FAILURE;
1166 		return (PCICFG_FAILURE);
1167 	}
1168 
1169 #ifdef DEBUG
1170 	{
1171 		uint64_t	unused;
1172 		unused = pcicfg_unused_space(&entry->io_hole, &len);
1173 		DEBUG2("ntbridge: Unused IO space %llx bytes over %d holes\n",
1174 		    unused, len);
1175 	}
1176 #endif
1177 
1178 	range[0].size_low = entry->io_len;
1179 	if (pcicfg_update_ranges_prop(dip, &range[0])) {
1180 		DEBUG0("Failed to update ranges (i/o)\n");
1181 		entry->error = PCICFG_FAILURE;
1182 		return (PCICFG_FAILURE);
1183 	}
1184 
1185 #ifdef DEBUG
1186 	{
1187 		uint64_t	unused;
1188 		unused = pcicfg_unused_space(&entry->mem_hole, &len);
1189 		DEBUG2("ntbridge: Unused Mem space %llx bytes over %d holes\n",
1190 		    unused, len);
1191 	}
1192 #endif
1193 
1194 	range[1].size_low = entry->memory_len;
1195 	if (pcicfg_update_ranges_prop(dip, &range[1])) {
1196 		DEBUG0("Failed to update ranges (memory)\n");
1197 		entry->error = PCICFG_FAILURE;
1198 		return (PCICFG_FAILURE);
1199 	}
1200 
1201 #ifdef DEBUG
1202 	{
1203 		uint64_t	unused;
1204 		unused = pcicfg_unused_space(&entry->pf_mem_hole, &len);
1205 		DEBUG2("ntbridge: Unused PF Mem space %llx bytes over"
1206 		    " %d holes\n", unused, len);
1207 	}
1208 #endif
1209 
1210 	range[2].size_low = entry->pf_memory_len;
1211 	if (pcicfg_update_ranges_prop(dip, &range[2])) {
1212 		DEBUG0("Failed to update ranges (PF memory)\n");
1213 		entry->error = PCICFG_FAILURE;
1214 		return (PCICFG_FAILURE);
1215 	}
1216 
1217 	return (PCICFG_SUCCESS);
1218 }
1219 
1220 static int
1221 pcicfg_ntbridge_program_child(dev_info_t *dip)
1222 {
1223 	pcicfg_phdl_t	*entry;
1224 	int		rc = PCICFG_SUCCESS;
1225 	dev_info_t	*anode = dip;
1226 
1227 	/* Find the Hotplug Connection (CN) node */
1228 	while ((anode != NULL) &&
1229 	    (strcmp(ddi_binding_name(anode), "hp_attachment") != 0)) {
1230 		anode = ddi_get_parent(anode);
1231 	}
1232 
1233 	if (anode == NULL) {
1234 		DEBUG0("ntbridge child tree not in PROBE state\n");
1235 		return (PCICFG_FAILURE);
1236 	}
1237 	entry = pcicfg_find_phdl(ddi_get_parent(anode));
1238 	ASSERT(entry);
1239 
1240 	if (pcicfg_bridge_assign(dip, entry) == DDI_WALK_TERMINATE) {
1241 		cmn_err(CE_WARN,
1242 		    "ntbridge: Error assigning range for child %s\n",
1243 		    ddi_get_name(dip));
1244 		rc = PCICFG_FAILURE;
1245 	}
1246 	return (rc);
1247 }
1248 
1249 static int
1250 pcicfg_ntbridge_unconfigure_child(dev_info_t *new_device, uint_t devno)
1251 {
1252 
1253 	dev_info_t	*new_ntbridgechild;
1254 	int 		len, bus;
1255 	uint16_t	vid;
1256 	ddi_acc_handle_t	config_handle;
1257 	pci_bus_range_t pci_bus_range;
1258 
1259 	len = sizeof (pci_bus_range_t);
1260 	if (ddi_getlongprop_buf(DDI_DEV_T_ANY, new_device, DDI_PROP_DONTPASS,
1261 	    "bus-range", (caddr_t)&pci_bus_range, &len) != DDI_SUCCESS) {
1262 		DEBUG0("no bus-range property\n");
1263 		return (PCICFG_FAILURE);
1264 	}
1265 
1266 	bus = pci_bus_range.lo; /* primary bus number of this bus node */
1267 
1268 	ndi_devi_alloc_sleep(new_device, DEVI_PSEUDO_NEXNAME,
1269 	    (pnode_t)DEVI_SID_NODEID, &new_ntbridgechild);
1270 
1271 	if (pcicfg_add_config_reg(new_ntbridgechild, bus, devno, 0)
1272 	    != DDI_PROP_SUCCESS) {
1273 		cmn_err(CE_WARN, "Unconfigure: Failed to add conf reg prop for "
1274 		    "ntbridge child.\n");
1275 		(void) ndi_devi_free(new_ntbridgechild);
1276 		return (PCICFG_FAILURE);
1277 	}
1278 
1279 	if (pci_config_setup(new_ntbridgechild, &config_handle)
1280 	    != DDI_SUCCESS) {
1281 		cmn_err(CE_WARN, "pcicfg: Cannot map ntbridge child %x\n",
1282 		    devno);
1283 		(void) ndi_devi_free(new_ntbridgechild);
1284 		return (PCICFG_FAILURE);
1285 	}
1286 
1287 	/*
1288 	 * See if there is any PCI HW at this location
1289 	 * by reading the Vendor ID.  If it returns with 0xffff
1290 	 * then there is no hardware at this location.
1291 	 */
1292 	vid = pci_config_get16(config_handle, PCI_CONF_VENID);
1293 
1294 	pci_config_teardown(&config_handle);
1295 	(void) ndi_devi_free(new_ntbridgechild);
1296 	if (vid	== 0xffff)
1297 		return (PCICFG_NODEVICE);
1298 
1299 	return (pcicfg_unconfigure(new_device, devno, PCICFG_ALL_FUNC, 0));
1300 }
1301 
1302 static uint_t
1303 pcicfg_ntbridge_unconfigure(dev_info_t *dip)
1304 {
1305 	pcicfg_phdl_t *entry = pcicfg_find_phdl(dip);
1306 	uint_t			*bus;
1307 	int			k, rc = DDI_FAILURE;
1308 
1309 	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "bus-range",
1310 	    (caddr_t)&bus, &k) != DDI_PROP_SUCCESS) {
1311 		DEBUG0("ntbridge: Failed to read bus-range property\n");
1312 		return (rc);
1313 	}
1314 
1315 	DEBUG2("ntbridge: Need to free bus [%d] range [%d]\n",
1316 	    bus[0], bus[1] - bus[0] + 1);
1317 
1318 	if (ndi_ra_free(ddi_get_parent(dip), (uint64_t)bus[0],
1319 	    (uint64_t)(bus[1] - bus[0] + 1),
1320 	    NDI_RA_TYPE_PCI_BUSNUM, NDI_RA_PASS) != NDI_SUCCESS) {
1321 		DEBUG0("ntbridge: Failed to free a bus number\n");
1322 		kmem_free(bus, k);
1323 		return (rc);
1324 	}
1325 
1326 	/*
1327 	 * Since our resources will be freed at the parent level,
1328 	 * just reset these values.
1329 	 */
1330 	entry->memory_len = 0;
1331 	entry->io_len = 0;
1332 	entry->pf_memory_len = 0;
1333 
1334 	kmem_free(bus, k);
1335 
1336 	/* the following will also free hole data. */
1337 	return (pcicfg_destroy_phdl(dip));
1338 
1339 }
1340 
1341 static int
1342 pcicfg_is_ntbridge(dev_info_t *dip)
1343 {
1344 	ddi_acc_handle_t	config_handle;
1345 	uint8_t		class, subclass;
1346 	int		rc = DDI_SUCCESS;
1347 
1348 	if (pci_config_setup(dip, &config_handle) != DDI_SUCCESS) {
1349 		cmn_err(CE_WARN,
1350 		    "pcicfg: cannot map config space, to get map type\n");
1351 		return (DDI_FAILURE);
1352 	}
1353 	class = pci_config_get8(config_handle, PCI_CONF_BASCLASS);
1354 	subclass = pci_config_get8(config_handle, PCI_CONF_SUBCLASS);
1355 
1356 	/* check for class=6, subclass=9, for non transparent bridges.  */
1357 	if ((class != PCI_CLASS_BRIDGE) || (subclass != PCI_BRIDGE_STBRIDGE))
1358 		rc = DDI_FAILURE;
1359 
1360 	DEBUG3("pcicfg: checking device %x,%x for indirect map. rc=%d\n",
1361 	    pci_config_get16(config_handle, PCI_CONF_VENID),
1362 	    pci_config_get16(config_handle, PCI_CONF_DEVID),
1363 	    rc);
1364 	pci_config_teardown(&config_handle);
1365 	return (rc);
1366 }
1367 
1368 static uint_t
1369 pcicfg_ntbridge_child(dev_info_t *dip)
1370 {
1371 	int 		len, val, rc = DDI_FAILURE;
1372 	dev_info_t	*anode = dip;
1373 
1374 	/*
1375 	 * Find the Hotplug Connection (CN) node
1376 	 */
1377 	while ((anode != NULL) && (strcmp(ddi_binding_name(anode),
1378 	    "hp_attachment") != 0)) {
1379 		anode = ddi_get_parent(anode);
1380 	}
1381 
1382 	if (anode == NULL) {
1383 		DEBUG0("ntbridge child tree not in PROBE state\n");
1384 		return (rc);
1385 	}
1386 	len = sizeof (int);
1387 	if (ddi_getlongprop_buf(DDI_DEV_T_ANY, ddi_get_parent(anode),
1388 	    DDI_PROP_DONTPASS, PCI_DEV_CONF_MAP_PROP, (caddr_t)&val, &len)
1389 	    != DDI_SUCCESS) {
1390 
1391 		DEBUG1("ntbridge child: no \"%s\" property\n",
1392 		    PCI_DEV_CONF_MAP_PROP);
1393 		return (rc);
1394 	}
1395 	DEBUG0("ntbridge child: success\n");
1396 	return (DDI_SUCCESS);
1397 }
1398 
1399 static uint_t
1400 pcicfg_get_ntbridge_child_range(dev_info_t *dip, uint64_t *boundbase,
1401 				uint64_t *boundlen, uint_t space_type)
1402 {
1403 	int		length, found = DDI_FAILURE, acount, i, ibridge;
1404 	pci_regspec_t	*assigned;
1405 
1406 	if ((ibridge = pcicfg_is_ntbridge(dip)) == DDI_FAILURE)
1407 		return (found);
1408 
1409 	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
1410 	    "assigned-addresses", (caddr_t)&assigned, &length)
1411 	    != DDI_PROP_SUCCESS) {
1412 		DEBUG1("Failed to get assigned-addresses property %llx\n", dip);
1413 		return (found);
1414 	}
1415 	DEBUG1("pcicfg: ntbridge child range: dip = %s\n",
1416 	    ddi_driver_name(dip));
1417 
1418 	acount = length / sizeof (pci_regspec_t);
1419 
1420 	for (i = 0; i < acount; i++) {
1421 		if ((PCI_REG_REG_G(assigned[i].pci_phys_hi) ==
1422 		    pcicfg_indirect_map_devs[ibridge].mem_range_bar_offset) &&
1423 		    (space_type == PCI_BASE_SPACE_MEM)) {
1424 			found = DDI_SUCCESS;
1425 			break;
1426 		} else if ((PCI_REG_REG_G(assigned[i].pci_phys_hi) ==
1427 		    pcicfg_indirect_map_devs[ibridge].io_range_bar_offset) &&
1428 		    (space_type == PCI_BASE_SPACE_IO)) {
1429 			found = DDI_SUCCESS;
1430 			break;
1431 		} else if ((PCI_REG_REG_G(assigned[i].pci_phys_hi) ==
1432 		    pcicfg_indirect_map_devs[ibridge].
1433 		    prefetch_mem_range_bar_offset) &&
1434 		    (space_type == (PCI_BASE_SPACE_MEM |
1435 		    PCI_BASE_PREF_M))) {
1436 			found = DDI_SUCCESS;
1437 			break;
1438 		}
1439 	}
1440 	DEBUG3("pcicfg: ntbridge child range: space=%x, base=%lx, len=%lx\n",
1441 	    space_type, assigned[i].pci_phys_low, assigned[i].pci_size_low);
1442 
1443 	if (found == DDI_SUCCESS)  {
1444 		*boundbase = assigned[i].pci_phys_low;
1445 		*boundlen = assigned[i].pci_size_low;
1446 	}
1447 
1448 	kmem_free(assigned, length);
1449 	return (found);
1450 }
1451 
1452 /*
1453  * This will turn  resources allocated by pcicfg_configure()
1454  * and remove the device tree from the Hotplug Connection (CN)
1455  * and below.  The routine assumes the devices have their
1456  * drivers detached.
1457  */
1458 int
1459 pcicfg_unconfigure(dev_info_t *devi, uint_t device, uint_t function,
1460     pcicfg_flags_t flags)
1461 {
1462 	dev_info_t *child_dip;
1463 	int func;
1464 	int i;
1465 	int max_function, trans_device;
1466 	int circ;
1467 	boolean_t is_pcie;
1468 
1469 	if (pcie_ari_is_enabled(devi) == PCIE_ARI_FORW_ENABLED)
1470 		max_function = PCICFG_MAX_ARI_FUNCTION;
1471 	else
1472 		max_function = PCI_MAX_FUNCTIONS;
1473 
1474 	/*
1475 	 * Cycle through devices to make sure none are busy.
1476 	 * If a single device is busy fail the whole unconfigure.
1477 	 */
1478 	is_pcie = is_pcie_fabric(devi);
1479 
1480 	ndi_devi_enter(devi, &circ);
1481 	for (func = 0; func < max_function; func++) {
1482 		if ((function != PCICFG_ALL_FUNC) && (function != func))
1483 			continue;
1484 
1485 		if (max_function == PCICFG_MAX_ARI_FUNCTION)
1486 			trans_device = func >> 3; /* ARI Device */
1487 		else
1488 			trans_device = device;
1489 
1490 		if ((child_dip = pcicfg_devi_find(devi, trans_device,
1491 		    func & 7)) == NULL)
1492 			continue;
1493 
1494 		if (ndi_devi_offline(child_dip, NDI_UNCONFIG) == NDI_SUCCESS)
1495 			continue;
1496 
1497 		/*
1498 		 * Device function is busy. Before returning we have to
1499 		 * put all functions back online which were taken
1500 		 * offline during the process.
1501 		 */
1502 		DEBUG2("Device [0x%x] function [0x%x] is busy\n",
1503 		    trans_device, func & 7);
1504 		/*
1505 		 * If we are only asked to offline one specific function,
1506 		 * and that fails, we just simply return.
1507 		 */
1508 		if (function != PCICFG_ALL_FUNC)
1509 			return (PCICFG_FAILURE);
1510 
1511 		for (i = 0; i < func; i++) {
1512 			if (max_function == PCICFG_MAX_ARI_FUNCTION)
1513 				trans_device = i >> 3;
1514 
1515 			if ((child_dip = pcicfg_devi_find(devi, trans_device,
1516 			    i & 7)) == NULL) {
1517 				DEBUG0("No more devices to put back "
1518 				    "on line!!\n");
1519 				/*
1520 				 * Made it through all functions
1521 				 */
1522 				continue;
1523 			}
1524 			if (ndi_devi_online(child_dip, NDI_CONFIG)
1525 			    != NDI_SUCCESS) {
1526 				DEBUG0("Failed to put back devices state\n");
1527 				goto fail;
1528 			}
1529 		}
1530 		goto fail;
1531 	}
1532 
1533 	/*
1534 	 * Now, tear down all devinfo nodes for this Connector.
1535 	 */
1536 	for (func = 0; func < max_function; func++) {
1537 		if ((function != PCICFG_ALL_FUNC) && (function != func))
1538 			continue;
1539 
1540 		if (max_function == PCICFG_MAX_ARI_FUNCTION)
1541 			trans_device = func >> 3; /* ARI Device */
1542 		else
1543 			trans_device = device;
1544 
1545 		if ((child_dip = pcicfg_devi_find(devi, trans_device, func & 7))
1546 		    == NULL) {
1547 			DEBUG2("No device at %x,%x\n", trans_device, func & 7);
1548 			continue;
1549 		}
1550 
1551 		DEBUG2("Tearing down device [0x%x] function [0x%x]\n",
1552 		    trans_device, func & 7);
1553 
1554 		if (pcicfg_is_ntbridge(child_dip) != DDI_FAILURE)
1555 			if (pcicfg_ntbridge_unconfigure(child_dip) !=
1556 			    PCICFG_SUCCESS) {
1557 				cmn_err(CE_WARN,
1558 				    "ntbridge: unconfigure failed\n");
1559 				goto fail;
1560 			}
1561 
1562 		if (pcicfg_teardown_device(child_dip, flags, is_pcie)
1563 		    != PCICFG_SUCCESS) {
1564 			DEBUG2("Failed to tear down device [0x%x]"
1565 			    "function [0x%x]\n", trans_device, func & 7);
1566 			goto fail;
1567 		}
1568 	}
1569 
1570 	if (pcie_ari_is_enabled(devi) == PCIE_ARI_FORW_ENABLED) {
1571 		(void) ddi_prop_remove(DDI_DEV_T_NONE, devi, "ari-enabled");
1572 		(void) pcie_ari_disable(devi);
1573 	}
1574 
1575 	ndi_devi_exit(devi, circ);
1576 	return (PCICFG_SUCCESS);
1577 
1578 fail:
1579 	ndi_devi_exit(devi, circ);
1580 	return (PCICFG_FAILURE);
1581 }
1582 
1583 static int
1584 pcicfg_teardown_device(dev_info_t *dip, pcicfg_flags_t flags, boolean_t is_pcie)
1585 {
1586 	ddi_acc_handle_t	handle;
1587 
1588 	/*
1589 	 * Free up resources associated with 'dip'
1590 	 */
1591 	if (pcicfg_free_resources(dip, flags) != PCICFG_SUCCESS) {
1592 		DEBUG0("Failed to free resources\n");
1593 		return (PCICFG_FAILURE);
1594 	}
1595 
1596 	/*
1597 	 * disable the device
1598 	 */
1599 	if (pcicfg_config_setup(dip, &handle) != PCICFG_SUCCESS)
1600 		return (PCICFG_FAILURE);
1601 	pcicfg_device_off(handle);
1602 	pcicfg_config_teardown(&handle);
1603 
1604 	if (is_pcie) {
1605 		/*
1606 		 * free pcie_bus_t for the sub-tree
1607 		 */
1608 		if (ddi_get_child(dip) != NULL)
1609 			pcie_fab_fini_bus(dip, PCIE_BUS_ALL);
1610 
1611 		pcie_fini_bus(dip, PCIE_BUS_ALL);
1612 	}
1613 
1614 	/*
1615 	 * The framework provides this routine which can
1616 	 * tear down a sub-tree.
1617 	 */
1618 	if (ndi_devi_offline(dip, NDI_DEVI_REMOVE) != NDI_SUCCESS) {
1619 		DEBUG0("Failed to offline and remove node\n");
1620 		return (PCICFG_FAILURE);
1621 	}
1622 
1623 	return (PCICFG_SUCCESS);
1624 }
1625 
1626 /*
1627  * BEGIN GENERIC SUPPORT ROUTINES
1628  */
1629 static pcicfg_phdl_t *
1630 pcicfg_find_phdl(dev_info_t *dip)
1631 {
1632 	pcicfg_phdl_t *entry;
1633 	mutex_enter(&pcicfg_list_mutex);
1634 	for (entry = pcicfg_phdl_list; entry != NULL; entry = entry->next) {
1635 		if (entry->dip == dip) {
1636 			mutex_exit(&pcicfg_list_mutex);
1637 			return (entry);
1638 		}
1639 	}
1640 	mutex_exit(&pcicfg_list_mutex);
1641 
1642 	/*
1643 	 * Did'nt find entry - create one
1644 	 */
1645 	return (pcicfg_create_phdl(dip));
1646 }
1647 
1648 static pcicfg_phdl_t *
1649 pcicfg_create_phdl(dev_info_t *dip)
1650 {
1651 	pcicfg_phdl_t *new;
1652 
1653 	new = (pcicfg_phdl_t *)kmem_zalloc(sizeof (pcicfg_phdl_t), KM_SLEEP);
1654 
1655 	new->dip = dip;
1656 	mutex_enter(&pcicfg_list_mutex);
1657 	new->next = pcicfg_phdl_list;
1658 	pcicfg_phdl_list = new;
1659 	mutex_exit(&pcicfg_list_mutex);
1660 
1661 	return (new);
1662 }
1663 
1664 static int
1665 pcicfg_destroy_phdl(dev_info_t *dip)
1666 {
1667 	pcicfg_phdl_t *entry;
1668 	pcicfg_phdl_t *follow = NULL;
1669 
1670 	mutex_enter(&pcicfg_list_mutex);
1671 	for (entry = pcicfg_phdl_list; entry != NULL; follow = entry,
1672 	    entry = entry->next) {
1673 		if (entry->dip == dip) {
1674 			if (entry == pcicfg_phdl_list) {
1675 				pcicfg_phdl_list = entry->next;
1676 			} else {
1677 				follow->next = entry->next;
1678 			}
1679 			/*
1680 			 * If this entry has any allocated memory
1681 			 * or IO space associated with it, that
1682 			 * must be freed up.
1683 			 */
1684 			if (entry->memory_len > 0) {
1685 				(void) ndi_ra_free(ddi_get_parent(dip),
1686 				    entry->memory_base, entry->memory_len,
1687 				    NDI_RA_TYPE_MEM, NDI_RA_PASS);
1688 			}
1689 			pcicfg_free_hole(&entry->mem_hole);
1690 
1691 			if (entry->io_len > 0) {
1692 				(void) ndi_ra_free(ddi_get_parent(dip),
1693 				    entry->io_base, entry->io_len,
1694 				    NDI_RA_TYPE_IO, NDI_RA_PASS);
1695 			}
1696 			pcicfg_free_hole(&entry->io_hole);
1697 
1698 			if (entry->pf_memory_len > 0) {
1699 				(void) ndi_ra_free(ddi_get_parent(dip),
1700 				    entry->pf_memory_base, entry->pf_memory_len,
1701 				    NDI_RA_TYPE_PCI_PREFETCH_MEM, NDI_RA_PASS);
1702 			}
1703 			pcicfg_free_hole(&entry->pf_mem_hole);
1704 
1705 			/*
1706 			 * Destroy this entry
1707 			 */
1708 			kmem_free((caddr_t)entry, sizeof (pcicfg_phdl_t));
1709 			mutex_exit(&pcicfg_list_mutex);
1710 			return (PCICFG_SUCCESS);
1711 		}
1712 	}
1713 	mutex_exit(&pcicfg_list_mutex);
1714 	/*
1715 	 * Did'nt find the entry
1716 	 */
1717 	return (PCICFG_FAILURE);
1718 }
1719 
1720 static int
1721 pcicfg_bridge_assign(dev_info_t *dip, void *hdl)
1722 {
1723 	ddi_acc_handle_t handle;
1724 	pci_regspec_t *reg;
1725 	int length;
1726 	int rcount;
1727 	int i;
1728 	int offset;
1729 	uint64_t mem_answer;
1730 	uint32_t io_answer;
1731 	int count;
1732 	uint8_t header_type;
1733 	ppb_ranges_t range[PCICFG_RANGE_LEN];
1734 	int bus_range[2];
1735 	uint64_t mem_residual;
1736 	uint64_t pf_mem_residual;
1737 	uint64_t io_residual;
1738 
1739 	pcicfg_phdl_t *entry = (pcicfg_phdl_t *)hdl;
1740 
1741 	DEBUG1("bridge assign: assigning addresses to %s\n", ddi_get_name(dip));
1742 
1743 	entry->error = PCICFG_SUCCESS;
1744 
1745 	if (entry == NULL) {
1746 		DEBUG0("Failed to get entry\n");
1747 		entry->error = PCICFG_FAILURE;
1748 		return (DDI_WALK_TERMINATE);
1749 	}
1750 
1751 	if (pcicfg_config_setup(dip, &handle) != DDI_SUCCESS) {
1752 		DEBUG0("Failed to map config space!\n");
1753 		entry->error = PCICFG_FAILURE;
1754 		return (DDI_WALK_TERMINATE);
1755 	}
1756 
1757 	header_type = pci_config_get8(handle, PCI_CONF_HEADER);
1758 
1759 	if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_PPB) {
1760 
1761 		bzero((caddr_t)range, sizeof (ppb_ranges_t) * PCICFG_RANGE_LEN);
1762 
1763 		(void) pcicfg_setup_bridge(entry, handle);
1764 
1765 		range[0].child_high = range[0].parent_high |=
1766 		    (PCI_REG_REL_M | PCI_ADDR_IO);
1767 		range[0].child_low = range[0].parent_low = entry->io_last;
1768 		range[1].child_high = range[1].parent_high |=
1769 		    (PCI_REG_REL_M | PCI_ADDR_MEM32);
1770 		range[1].child_low = range[1].parent_low =
1771 		    entry->memory_last;
1772 		range[2].child_high = range[2].parent_high |=
1773 		    (PCI_REG_REL_M | PCI_ADDR_MEM32 | PCI_REG_PF_M);
1774 		range[2].child_low = range[2].parent_low =
1775 		    entry->pf_memory_last;
1776 
1777 		ndi_devi_enter(dip, &count);
1778 		ddi_walk_devs(ddi_get_child(dip),
1779 		    pcicfg_bridge_assign, (void *)entry);
1780 		ndi_devi_exit(dip, count);
1781 
1782 		(void) pcicfg_update_bridge(entry, handle);
1783 
1784 		bus_range[0] = pci_config_get8(handle, PCI_BCNF_SECBUS);
1785 		bus_range[1] = pci_config_get8(handle, PCI_BCNF_SUBBUS);
1786 
1787 		if (ndi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1788 		    "bus-range", bus_range, 2) != DDI_SUCCESS) {
1789 			DEBUG0("Failed to set bus-range property");
1790 			entry->error = PCICFG_FAILURE;
1791 			(void) pcicfg_config_teardown(&handle);
1792 			return (DDI_WALK_TERMINATE);
1793 		}
1794 
1795 		/*
1796 		 * Put back memory and I/O space not allocated
1797 		 * under the bridge.
1798 		 */
1799 		mem_residual = entry->memory_len -
1800 		    (entry->memory_last - entry->memory_base);
1801 		if (mem_residual > 0) {
1802 			(void) ndi_ra_free(ddi_get_parent(dip),
1803 			    entry->memory_last, mem_residual,
1804 			    NDI_RA_TYPE_MEM, NDI_RA_PASS);
1805 		}
1806 
1807 		io_residual = entry->io_len - (entry->io_last - entry->io_base);
1808 		if (io_residual > 0) {
1809 			(void) ndi_ra_free(ddi_get_parent(dip), entry->io_last,
1810 			    io_residual, NDI_RA_TYPE_IO, NDI_RA_PASS);
1811 		}
1812 
1813 		pf_mem_residual = entry->pf_memory_len -
1814 		    (entry->pf_memory_last - entry->pf_memory_base);
1815 		if (pf_mem_residual > 0) {
1816 			(void) ndi_ra_free(ddi_get_parent(dip),
1817 			    entry->pf_memory_last, pf_mem_residual,
1818 			    NDI_RA_TYPE_PCI_PREFETCH_MEM, NDI_RA_PASS);
1819 		}
1820 
1821 		if (entry->io_len > 0) {
1822 			range[0].size_low = entry->io_last - entry->io_base;
1823 			if (pcicfg_update_ranges_prop(dip, &range[0])) {
1824 				DEBUG0("Failed to update ranges (i/o)\n");
1825 				entry->error = PCICFG_FAILURE;
1826 				(void) pcicfg_config_teardown(&handle);
1827 				return (DDI_WALK_TERMINATE);
1828 			}
1829 		}
1830 		if (entry->memory_len > 0) {
1831 			range[1].size_low =
1832 			    entry->memory_last - entry->memory_base;
1833 			if (pcicfg_update_ranges_prop(dip, &range[1])) {
1834 				DEBUG0("Failed to update ranges (memory)\n");
1835 				entry->error = PCICFG_FAILURE;
1836 				(void) pcicfg_config_teardown(&handle);
1837 				return (DDI_WALK_TERMINATE);
1838 			}
1839 		}
1840 		if (entry->pf_memory_len > 0) {
1841 			range[2].size_low =
1842 			    entry->pf_memory_last - entry->pf_memory_base;
1843 			if (pcicfg_update_ranges_prop(dip, &range[2])) {
1844 				DEBUG0("Failed to update ranges (PF memory)\n");
1845 				entry->error = PCICFG_FAILURE;
1846 				(void) pcicfg_config_teardown(&handle);
1847 				return (DDI_WALK_TERMINATE);
1848 			}
1849 		}
1850 
1851 		(void) pcicfg_device_on(handle);
1852 
1853 		PCICFG_DUMP_BRIDGE_CONFIG(handle);
1854 
1855 		(void) pcicfg_config_teardown(&handle);
1856 
1857 		return (DDI_WALK_PRUNECHILD);
1858 	}
1859 
1860 	/*
1861 	 * If there is an interrupt pin set program
1862 	 * interrupt line with default values.
1863 	 */
1864 	if (pci_config_get8(handle, PCI_CONF_IPIN)) {
1865 		pci_config_put8(handle, PCI_CONF_ILINE, 0xf);
1866 	}
1867 
1868 	/*
1869 	 * A single device (under a bridge).
1870 	 * For each "reg" property with a length, allocate memory
1871 	 * and program the base registers.
1872 	 */
1873 	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "reg",
1874 	    (caddr_t)&reg, &length) != DDI_PROP_SUCCESS) {
1875 		DEBUG0("Failed to read reg property\n");
1876 		entry->error = PCICFG_FAILURE;
1877 		(void) pcicfg_config_teardown(&handle);
1878 		return (DDI_WALK_TERMINATE);
1879 	}
1880 
1881 	rcount = length / sizeof (pci_regspec_t);
1882 	offset = PCI_CONF_BASE0;
1883 	for (i = 0; i < rcount; i++) {
1884 		if ((reg[i].pci_size_low != 0) || (reg[i].pci_size_hi != 0)) {
1885 
1886 			offset = PCI_REG_REG_G(reg[i].pci_phys_hi);
1887 
1888 			switch (PCI_REG_ADDR_G(reg[i].pci_phys_hi)) {
1889 			case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
1890 
1891 				if (reg[i].pci_phys_hi & PCI_REG_PF_M) {
1892 					/* allocate prefetchable memory */
1893 					pcicfg_get_pf_mem(entry,
1894 					    reg[i].pci_size_low, &mem_answer);
1895 				} else { /* get non prefetchable memory */
1896 					pcicfg_get_mem(entry,
1897 					    reg[i].pci_size_low, &mem_answer);
1898 				}
1899 				pci_config_put64(handle, offset, mem_answer);
1900 				DEBUG2("REGISTER off %x (64)LO ----> [0x%x]\n",
1901 				    offset, pci_config_get32(handle, offset));
1902 				DEBUG2("REGISTER off %x (64)HI ----> [0x%x]\n",
1903 				    offset + 4,
1904 				    pci_config_get32(handle, offset + 4));
1905 
1906 				reg[i].pci_phys_hi |= PCI_REG_REL_M;
1907 				reg[i].pci_phys_low = PCICFG_LOADDR(mem_answer);
1908 				reg[i].pci_phys_mid = PCICFG_HIADDR(mem_answer);
1909 				break;
1910 
1911 			case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
1912 				if (reg[i].pci_phys_hi & PCI_REG_PF_M) {
1913 					/* allocate prefetchable memory */
1914 					pcicfg_get_pf_mem(entry,
1915 					    reg[i].pci_size_low, &mem_answer);
1916 				} else {
1917 					/* get non prefetchable memory */
1918 					pcicfg_get_mem(entry,
1919 					    reg[i].pci_size_low, &mem_answer);
1920 				}
1921 
1922 				pci_config_put32(handle, offset,
1923 				    (uint32_t)mem_answer);
1924 
1925 				DEBUG2("REGISTER off %x(32)LO ----> [0x%x]\n",
1926 				    offset, pci_config_get32(handle, offset));
1927 
1928 				reg[i].pci_phys_hi |= PCI_REG_REL_M;
1929 				reg[i].pci_phys_low = (uint32_t)mem_answer;
1930 
1931 				break;
1932 			case PCI_REG_ADDR_G(PCI_ADDR_IO):
1933 				/* allocate I/O space from the allocator */
1934 
1935 				(void) pcicfg_get_io(entry, reg[i].pci_size_low,
1936 				    &io_answer);
1937 				pci_config_put32(handle, offset, io_answer);
1938 
1939 				DEBUG2("REGISTER off %x (I/O)LO ----> [0x%x]\n",
1940 				    offset, pci_config_get32(handle, offset));
1941 
1942 				reg[i].pci_phys_hi |= PCI_REG_REL_M;
1943 				reg[i].pci_phys_low = io_answer;
1944 
1945 				break;
1946 			default:
1947 				DEBUG0("Unknown register type\n");
1948 				kmem_free(reg, length);
1949 				(void) pcicfg_config_teardown(&handle);
1950 				entry->error = PCICFG_FAILURE;
1951 				return (DDI_WALK_TERMINATE);
1952 			} /* switch */
1953 
1954 			/*
1955 			 * Now that memory locations are assigned,
1956 			 * update the assigned address property.
1957 			 */
1958 			if (pcicfg_update_assigned_prop(dip, &reg[i])
1959 			    != PCICFG_SUCCESS) {
1960 				kmem_free(reg, length);
1961 				(void) pcicfg_config_teardown(&handle);
1962 				entry->error = PCICFG_FAILURE;
1963 				return (DDI_WALK_TERMINATE);
1964 			}
1965 		}
1966 	}
1967 	(void) pcicfg_device_on(handle);
1968 
1969 	PCICFG_DUMP_DEVICE_CONFIG(handle);
1970 
1971 	(void) pcicfg_config_teardown(&handle);
1972 	kmem_free((caddr_t)reg, length);
1973 	return (DDI_WALK_CONTINUE);
1974 }
1975 
1976 static int
1977 pcicfg_device_assign(dev_info_t *dip)
1978 {
1979 	ddi_acc_handle_t	handle;
1980 	pci_regspec_t		*reg;
1981 	int			length;
1982 	int			rcount;
1983 	int			i;
1984 	int			offset;
1985 	ndi_ra_request_t	request;
1986 	uint64_t		answer;
1987 	uint64_t		alen;
1988 
1989 	DEBUG1("%llx now under configuration\n", dip);
1990 
1991 	/* request.ra_len = PCICFG_ROUND_UP(request.ra_len, PCICFG_IOGRAN); */
1992 	if (pcicfg_ntbridge_child(dip) == DDI_SUCCESS) {
1993 
1994 		return (pcicfg_ntbridge_program_child(dip));
1995 	}
1996 	/*
1997 	 * XXX Failure here should be noted
1998 	 */
1999 	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "reg",
2000 	    (caddr_t)&reg, &length) != DDI_PROP_SUCCESS) {
2001 		DEBUG0("Failed to read reg property\n");
2002 		return (PCICFG_FAILURE);
2003 	}
2004 
2005 	if (pcicfg_config_setup(dip, &handle) != DDI_SUCCESS) {
2006 		DEBUG0("Failed to map config space!\n");
2007 		kmem_free(reg, length);
2008 		return (PCICFG_FAILURE);
2009 	}
2010 
2011 	/*
2012 	 * A single device
2013 	 *
2014 	 * For each "reg" property with a length, allocate memory
2015 	 * and program the base registers.
2016 	 */
2017 
2018 	/*
2019 	 * If there is an interrupt pin set program
2020 	 * interrupt line with default values.
2021 	 */
2022 	if (pci_config_get8(handle, PCI_CONF_IPIN)) {
2023 		pci_config_put8(handle, PCI_CONF_ILINE, 0xf);
2024 	}
2025 
2026 	bzero((caddr_t)&request, sizeof (ndi_ra_request_t));
2027 
2028 	/*
2029 	 * Note: Both non-prefetchable and prefetchable memory space
2030 	 * allocations are made within 32bit space. Currently, BIOSs
2031 	 * allocate device memory for PCI devices within the 32bit space
2032 	 * so this will not be a problem.
2033 	 */
2034 	request.ra_flags |= NDI_RA_ALIGN_SIZE | NDI_RA_ALLOC_BOUNDED;
2035 	request.ra_boundbase = 0;
2036 	request.ra_boundlen = PCICFG_4GIG_LIMIT;
2037 
2038 	rcount = length / sizeof (pci_regspec_t);
2039 	offset = PCI_CONF_BASE0;
2040 	for (i = 0; i < rcount; i++) {
2041 		char	*mem_type;
2042 
2043 		if ((reg[i].pci_size_low != 0)|| (reg[i].pci_size_hi != 0)) {
2044 
2045 			offset = PCI_REG_REG_G(reg[i].pci_phys_hi);
2046 			request.ra_len = reg[i].pci_size_low;
2047 
2048 			switch (PCI_REG_ADDR_G(reg[i].pci_phys_hi)) {
2049 			case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
2050 				if (reg[i].pci_phys_hi & PCI_REG_PF_M) {
2051 					mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
2052 				} else {
2053 					mem_type = NDI_RA_TYPE_MEM;
2054 				}
2055 				/* allocate memory space from the allocator */
2056 				if (ndi_ra_alloc(ddi_get_parent(dip), &request,
2057 				    &answer, &alen, mem_type, NDI_RA_PASS)
2058 				    != NDI_SUCCESS) {
2059 					DEBUG0("Failed to allocate 64b mem\n");
2060 					kmem_free(reg, length);
2061 					(void) pcicfg_config_teardown(&handle);
2062 					return (PCICFG_NORESRC);
2063 				}
2064 				DEBUG3("64 addr = [0x%x.0x%x] len [0x%x]\n",
2065 				    PCICFG_HIADDR(answer),
2066 				    PCICFG_LOADDR(answer), alen);
2067 				/* program the low word */
2068 				pci_config_put32(handle, offset,
2069 				    PCICFG_LOADDR(answer));
2070 				/* program the high word */
2071 				pci_config_put32(handle, offset + 4,
2072 				    PCICFG_HIADDR(answer));
2073 
2074 				reg[i].pci_phys_hi |= PCI_REG_REL_M;
2075 				reg[i].pci_phys_low = PCICFG_LOADDR(answer);
2076 				reg[i].pci_phys_mid = PCICFG_HIADDR(answer);
2077 				/*
2078 				 * currently support 32b address space
2079 				 * assignments only.
2080 				 */
2081 				reg[i].pci_phys_hi ^=
2082 				    PCI_ADDR_MEM64 ^ PCI_ADDR_MEM32;
2083 
2084 				offset += 8;
2085 				break;
2086 
2087 			case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
2088 				if (reg[i].pci_phys_hi & PCI_REG_PF_M)
2089 					mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
2090 				else
2091 					mem_type = NDI_RA_TYPE_MEM;
2092 				/* allocate memory space from the allocator */
2093 				if (ndi_ra_alloc(ddi_get_parent(dip), &request,
2094 				    &answer, &alen, mem_type, NDI_RA_PASS)
2095 				    != NDI_SUCCESS) {
2096 					DEBUG0("Failed to allocate 32b mem\n");
2097 					kmem_free(reg, length);
2098 					(void) pcicfg_config_teardown(&handle);
2099 					return (PCICFG_NORESRC);
2100 				}
2101 				DEBUG3("32 addr = [0x%x.0x%x] len [0x%x]\n",
2102 				    PCICFG_HIADDR(answer),
2103 				    PCICFG_LOADDR(answer),
2104 				    alen);
2105 				/* program the low word */
2106 				pci_config_put32(handle, offset,
2107 				    PCICFG_LOADDR(answer));
2108 
2109 				reg[i].pci_phys_hi |= PCI_REG_REL_M;
2110 				reg[i].pci_phys_low = PCICFG_LOADDR(answer);
2111 				reg[i].pci_phys_mid = 0;
2112 
2113 				offset += 4;
2114 				break;
2115 			case PCI_REG_ADDR_G(PCI_ADDR_IO):
2116 				/*
2117 				 * Try to allocate I/O space. If it fails,
2118 				 * continue here instead of returning failure
2119 				 * so that the hotplug for drivers that don't
2120 				 * use I/O space can succeed, For drivers
2121 				 * that need to use I/O space, the hotplug
2122 				 * will still fail later during driver attach.
2123 				 */
2124 				if (ndi_ra_alloc(ddi_get_parent(dip), &request,
2125 				    &answer, &alen, NDI_RA_TYPE_IO, NDI_RA_PASS)
2126 				    != NDI_SUCCESS) {
2127 					DEBUG0("Failed to allocate I/O\n");
2128 					continue;
2129 				}
2130 				DEBUG3("I/O addr = [0x%x.0x%x] len [0x%x]\n",
2131 				    PCICFG_HIADDR(answer),
2132 				    PCICFG_LOADDR(answer), alen);
2133 				pci_config_put32(handle, offset,
2134 				    PCICFG_LOADDR(answer));
2135 
2136 				reg[i].pci_phys_hi |= PCI_REG_REL_M;
2137 				reg[i].pci_phys_low = PCICFG_LOADDR(answer);
2138 
2139 				offset += 4;
2140 				break;
2141 			default:
2142 				DEBUG0("Unknown register type\n");
2143 				kmem_free(reg, length);
2144 				(void) pcicfg_config_teardown(&handle);
2145 				return (PCICFG_FAILURE);
2146 			} /* switch */
2147 
2148 			/*
2149 			 * Now that memory locations are assigned,
2150 			 * update the assigned address property.
2151 			 */
2152 
2153 			if (pcicfg_update_assigned_prop(dip, &reg[i])
2154 			    != PCICFG_SUCCESS) {
2155 				kmem_free(reg, length);
2156 				(void) pcicfg_config_teardown(&handle);
2157 				return (PCICFG_FAILURE);
2158 			}
2159 		}
2160 	}
2161 
2162 	(void) pcicfg_device_on(handle);
2163 	kmem_free(reg, length);
2164 
2165 	PCICFG_DUMP_DEVICE_CONFIG(handle);
2166 
2167 	(void) pcicfg_config_teardown(&handle);
2168 	return (PCICFG_SUCCESS);
2169 }
2170 
2171 static int
2172 pcicfg_device_assign_readonly(dev_info_t *dip)
2173 {
2174 	ddi_acc_handle_t	handle;
2175 	pci_regspec_t		*assigned;
2176 	int			length;
2177 	int			acount;
2178 	int			i;
2179 	ndi_ra_request_t	request;
2180 	uint64_t		answer;
2181 	uint64_t		alen;
2182 
2183 	DEBUG1("%llx now under configuration\n", dip);
2184 
2185 	/*
2186 	 * we don't support ntbridges for readonly probe.
2187 	 */
2188 	if (pcicfg_ntbridge_child(dip) == DDI_SUCCESS) {
2189 		return (PCICFG_FAILURE);
2190 	}
2191 
2192 	if (ddi_getlongprop(DDI_DEV_T_ANY, dip,
2193 	    DDI_PROP_DONTPASS, "assigned-addresses", (caddr_t)&assigned,
2194 	    &length) != DDI_PROP_SUCCESS) {
2195 		DEBUG0("Failed to read assigned-addresses property\n");
2196 		return (PCICFG_FAILURE);
2197 	}
2198 
2199 	if (pcicfg_config_setup(dip, &handle) != DDI_SUCCESS) {
2200 		DEBUG0("Failed to map config space!\n");
2201 		kmem_free(assigned, length);
2202 		return (PCICFG_FAILURE);
2203 	}
2204 
2205 	/*
2206 	 * If there is an interrupt pin set program
2207 	 * interrupt line with default values.
2208 	 */
2209 	if (pci_config_get8(handle, PCI_CONF_IPIN)) {
2210 		pci_config_put8(handle, PCI_CONF_ILINE, 0xf);
2211 	}
2212 	/*
2213 	 * Note: Both non-prefetchable and prefetchable memory space
2214 	 * allocations are made within 32bit space. Currently, BIOSs
2215 	 * allocate device memory for PCI devices within the 32bit space
2216 	 * so this will not be a problem.
2217 	 */
2218 	bzero((caddr_t)&request, sizeof (ndi_ra_request_t));
2219 
2220 	request.ra_flags = NDI_RA_ALLOC_SPECIFIED;  /* specified addr */
2221 	request.ra_boundbase = 0;
2222 	request.ra_boundlen = PCICFG_4GIG_LIMIT;
2223 
2224 	acount = length / sizeof (pci_regspec_t);
2225 	for (i = 0; i < acount; i++) {
2226 		char	*mem_type;
2227 
2228 		if ((assigned[i].pci_size_low != 0)||
2229 		    (assigned[i].pci_size_hi != 0)) {
2230 
2231 			request.ra_len = assigned[i].pci_size_low;
2232 
2233 			switch (PCI_REG_ADDR_G(assigned[i].pci_phys_hi)) {
2234 			case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
2235 				request.ra_addr = (uint64_t)PCICFG_LADDR(
2236 				    assigned[i].pci_phys_low,
2237 				    assigned[i].pci_phys_mid);
2238 
2239 				if (assigned[i].pci_phys_hi & PCI_REG_PF_M) {
2240 					mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
2241 				} else {
2242 					mem_type = NDI_RA_TYPE_MEM;
2243 				}
2244 				/* allocate memory space from the allocator */
2245 				if (ndi_ra_alloc(ddi_get_parent(dip), &request,
2246 				    &answer, &alen, mem_type, NDI_RA_PASS)
2247 				    != NDI_SUCCESS) {
2248 					DEBUG0("Failed to allocate 64b mem\n");
2249 					kmem_free(assigned, length);
2250 					return (PCICFG_NORESRC);
2251 				}
2252 
2253 				break;
2254 			case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
2255 				request.ra_addr = (uint64_t)
2256 				    assigned[i].pci_phys_low;
2257 
2258 				if (assigned[i].pci_phys_hi & PCI_REG_PF_M)
2259 					mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
2260 				else
2261 					mem_type = NDI_RA_TYPE_MEM;
2262 				/* allocate memory space from the allocator */
2263 				if (ndi_ra_alloc(ddi_get_parent(dip), &request,
2264 				    &answer, &alen, mem_type, NDI_RA_PASS)
2265 				    != NDI_SUCCESS) {
2266 					DEBUG0("Failed to allocate 32b mem\n");
2267 					kmem_free(assigned, length);
2268 					return (PCICFG_NORESRC);
2269 				}
2270 
2271 				break;
2272 			case PCI_REG_ADDR_G(PCI_ADDR_IO):
2273 				request.ra_addr = (uint64_t)
2274 				    assigned[i].pci_phys_low;
2275 
2276 				/* allocate I/O space from the allocator */
2277 				if (ndi_ra_alloc(ddi_get_parent(dip), &request,
2278 				    &answer, &alen, NDI_RA_TYPE_IO, NDI_RA_PASS)
2279 				    != NDI_SUCCESS) {
2280 					DEBUG0("Failed to allocate I/O\n");
2281 					kmem_free(assigned, length);
2282 					return (PCICFG_NORESRC);
2283 				}
2284 
2285 				break;
2286 			default:
2287 				DEBUG0("Unknown register type\n");
2288 				kmem_free(assigned, length);
2289 				return (PCICFG_FAILURE);
2290 			} /* switch */
2291 		}
2292 	}
2293 
2294 	(void) pcicfg_device_on(handle);
2295 	kmem_free(assigned, length);
2296 
2297 	PCICFG_DUMP_DEVICE_CONFIG(handle);
2298 
2299 	(void) pcicfg_config_teardown(&handle);
2300 	return (PCICFG_SUCCESS);
2301 }
2302 
2303 #ifdef	DEBUG
2304 /*
2305  * This function is useful in debug mode, where we can measure how
2306  * much memory was wasted/unallocated in bridge device's domain.
2307  */
2308 static uint64_t
2309 pcicfg_unused_space(hole_t *hole, uint32_t *hole_count)
2310 {
2311 	uint64_t len = 0;
2312 	uint32_t count = 0;
2313 
2314 	do {
2315 		len += hole->len;
2316 		hole = hole->next;
2317 		count++;
2318 	} while (hole);
2319 	*hole_count = count;
2320 	return (len);
2321 }
2322 #endif
2323 
2324 /*
2325  * This function frees data structures that hold the hole information
2326  * which are allocated in pcicfg_alloc_hole(). This is not freeing
2327  * any memory allocated through NDI calls.
2328  */
2329 static void
2330 pcicfg_free_hole(hole_t *addr_hole)
2331 {
2332 	hole_t *nhole, *hole = addr_hole->next;
2333 
2334 	while (hole) {
2335 		nhole = hole->next;
2336 		kmem_free(hole, sizeof (hole_t));
2337 		hole = nhole;
2338 	}
2339 }
2340 
2341 static uint64_t
2342 pcicfg_alloc_hole(hole_t *addr_hole, uint64_t *alast, uint32_t length)
2343 {
2344 	uint64_t actual_hole_start, ostart, olen;
2345 	hole_t	*hole = addr_hole, *thole, *nhole;
2346 
2347 	do {
2348 		actual_hole_start = PCICFG_ROUND_UP(hole->start, length);
2349 		if (((actual_hole_start - hole->start) + length) <= hole->len) {
2350 			DEBUG3("hole found. start %llx, len %llx, req=0x%x\n",
2351 			    hole->start, hole->len, length);
2352 			ostart = hole->start;
2353 			olen = hole->len;
2354 			/* current hole parameters adjust */
2355 			if ((actual_hole_start - hole->start) == 0) {
2356 				hole->start += length;
2357 				hole->len -= length;
2358 				if (hole->start > *alast)
2359 					*alast = hole->start;
2360 			} else {
2361 				hole->len = actual_hole_start - hole->start;
2362 				nhole = (hole_t *)kmem_zalloc(sizeof (hole_t),
2363 				    KM_SLEEP);
2364 				nhole->start = actual_hole_start + length;
2365 				nhole->len = (ostart + olen) - nhole->start;
2366 				nhole->next = NULL;
2367 				thole = hole->next;
2368 				hole->next = nhole;
2369 				nhole->next = thole;
2370 				if (nhole->start > *alast)
2371 					*alast = nhole->start;
2372 				DEBUG2("put new hole to %llx, %llx\n",
2373 				    nhole->start, nhole->len);
2374 			}
2375 			DEBUG2("adjust current hole to %llx, %llx\n",
2376 			    hole->start, hole->len);
2377 			break;
2378 		}
2379 		actual_hole_start = 0;
2380 		hole = hole->next;
2381 	} while (hole);
2382 
2383 	DEBUG1("return hole at %llx\n", actual_hole_start);
2384 	return (actual_hole_start);
2385 }
2386 
2387 static void
2388 pcicfg_get_mem(pcicfg_phdl_t *entry, uint32_t length, uint64_t *ans)
2389 {
2390 	uint64_t new_mem;
2391 
2392 	/* See if there is a hole, that can hold this request. */
2393 	new_mem = pcicfg_alloc_hole(&entry->mem_hole, &entry->memory_last,
2394 	    length);
2395 	if (new_mem) {	/* if non-zero, found a hole. */
2396 		if (ans != NULL)
2397 			*ans = new_mem;
2398 	} else
2399 		cmn_err(CE_WARN, "No %u bytes memory window for %s\n",
2400 		    length, ddi_get_name(entry->dip));
2401 }
2402 
2403 static void
2404 pcicfg_get_io(pcicfg_phdl_t *entry,
2405 	uint32_t length, uint32_t *ans)
2406 {
2407 	uint32_t new_io;
2408 	uint64_t io_last;
2409 
2410 	/*
2411 	 * See if there is a hole, that can hold this request.
2412 	 * Pass 64 bit parameters and then truncate to 32 bit.
2413 	 */
2414 	io_last = entry->io_last;
2415 	new_io = (uint32_t)pcicfg_alloc_hole(&entry->io_hole, &io_last, length);
2416 	if (new_io) {	/* if non-zero, found a hole. */
2417 		entry->io_last = (uint32_t)io_last;
2418 		if (ans != NULL)
2419 			*ans = new_io;
2420 	} else
2421 		cmn_err(CE_WARN, "No %u bytes IO space window for %s\n",
2422 		    length, ddi_get_name(entry->dip));
2423 }
2424 
2425 static void
2426 pcicfg_get_pf_mem(pcicfg_phdl_t *entry, uint32_t length, uint64_t *ans)
2427 {
2428 	uint64_t new_mem;
2429 
2430 	/* See if there is a hole, that can hold this request. */
2431 	new_mem = pcicfg_alloc_hole(&entry->pf_mem_hole, &entry->pf_memory_last,
2432 	    length);
2433 	if (new_mem) {	/* if non-zero, found a hole. */
2434 		if (ans != NULL)
2435 			*ans = new_mem;
2436 	} else
2437 		cmn_err(CE_WARN, "No %u bytes PF memory window for %s\n",
2438 		    length, ddi_get_name(entry->dip));
2439 }
2440 
2441 static int
2442 pcicfg_sum_resources(dev_info_t *dip, void *hdl)
2443 {
2444 	pcicfg_phdl_t *entry = (pcicfg_phdl_t *)hdl;
2445 	pci_regspec_t *pci_rp;
2446 	int length;
2447 	int rcount;
2448 	int i;
2449 	ndi_ra_request_t *pf_mem_request;
2450 	ndi_ra_request_t *mem_request;
2451 	ndi_ra_request_t *io_request;
2452 	uint8_t header_type;
2453 	ddi_acc_handle_t handle;
2454 
2455 	entry->error = PCICFG_SUCCESS;
2456 
2457 	pf_mem_request = &entry->pf_mem_req;
2458 	mem_request = &entry->mem_req;
2459 	io_request =  &entry->io_req;
2460 
2461 	if (pcicfg_config_setup(dip, &handle) != DDI_SUCCESS) {
2462 		DEBUG0("Failed to map config space!\n");
2463 		entry->error = PCICFG_FAILURE;
2464 		return (DDI_WALK_TERMINATE);
2465 	}
2466 
2467 	header_type = pci_config_get8(handle, PCI_CONF_HEADER);
2468 
2469 	/*
2470 	 * If its a bridge - just record the highest bus seen
2471 	 */
2472 	if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_PPB) {
2473 
2474 		if (entry->highest_bus < pci_config_get8(handle,
2475 		    PCI_BCNF_SECBUS)) {
2476 			entry->highest_bus =
2477 			    pci_config_get8(handle, PCI_BCNF_SECBUS);
2478 		}
2479 		(void) pcicfg_config_teardown(&handle);
2480 		entry->error = PCICFG_FAILURE;
2481 		return (DDI_WALK_CONTINUE);
2482 	} else {
2483 		if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
2484 		    "reg", (caddr_t)&pci_rp, &length) != DDI_PROP_SUCCESS) {
2485 			/*
2486 			 * If one node in (the subtree of nodes)
2487 			 * doesn't have a "reg" property fail the
2488 			 * allocation.
2489 			 */
2490 			entry->memory_len = 0;
2491 			entry->io_len = 0;
2492 			entry->pf_memory_len = 0;
2493 			entry->error = PCICFG_FAILURE;
2494 			(void) pcicfg_config_teardown(&handle);
2495 			return (DDI_WALK_TERMINATE);
2496 		}
2497 		/*
2498 		 * For each "reg" property with a length, add that to the
2499 		 * total memory (or I/O) to allocate.
2500 		 */
2501 		rcount = length / sizeof (pci_regspec_t);
2502 
2503 		for (i = 0; i < rcount; i++) {
2504 
2505 			switch (PCI_REG_ADDR_G(pci_rp[i].pci_phys_hi)) {
2506 
2507 			case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
2508 				if (pci_rp[i].pci_phys_hi & PCI_REG_PF_M) {
2509 					pf_mem_request->ra_len =
2510 					    pci_rp[i].pci_size_low +
2511 					    PCICFG_ROUND_UP(
2512 					    pf_mem_request->ra_len,
2513 					    pci_rp[i].pci_size_low);
2514 					DEBUG1("ADDING 32 --->0x%x\n",
2515 					    pci_rp[i].pci_size_low);
2516 				} else {
2517 					mem_request->ra_len =
2518 					    pci_rp[i].pci_size_low +
2519 					    PCICFG_ROUND_UP(mem_request->ra_len,
2520 					    pci_rp[i].pci_size_low);
2521 					DEBUG1("ADDING 32 --->0x%x\n",
2522 					    pci_rp[i].pci_size_low);
2523 				}
2524 
2525 				break;
2526 			case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
2527 				if (pci_rp[i].pci_phys_hi & PCI_REG_PF_M) {
2528 					pf_mem_request->ra_len =
2529 					    pci_rp[i].pci_size_low +
2530 					    PCICFG_ROUND_UP(
2531 					    pf_mem_request->ra_len,
2532 					    pci_rp[i].pci_size_low);
2533 					DEBUG1("ADDING 64 --->0x%x\n",
2534 					    pci_rp[i].pci_size_low);
2535 				} else {
2536 					mem_request->ra_len =
2537 					    pci_rp[i].pci_size_low +
2538 					    PCICFG_ROUND_UP(mem_request->ra_len,
2539 					    pci_rp[i].pci_size_low);
2540 					DEBUG1("ADDING 64 --->0x%x\n",
2541 					    pci_rp[i].pci_size_low);
2542 				}
2543 
2544 				break;
2545 			case PCI_REG_ADDR_G(PCI_ADDR_IO):
2546 				io_request->ra_len =
2547 				    pci_rp[i].pci_size_low +
2548 				    PCICFG_ROUND_UP(io_request->ra_len,
2549 				    pci_rp[i].pci_size_low);
2550 				DEBUG1("ADDING I/O --->0x%x\n",
2551 				    pci_rp[i].pci_size_low);
2552 				break;
2553 			default:
2554 				/* Config space register - not included */
2555 				break;
2556 			}
2557 		}
2558 
2559 		/*
2560 		 * free the memory allocated by ddi_getlongprop
2561 		 */
2562 		kmem_free(pci_rp, length);
2563 
2564 		/*
2565 		 * continue the walk to the next sibling to sum memory
2566 		 */
2567 
2568 		(void) pcicfg_config_teardown(&handle);
2569 
2570 		return (DDI_WALK_CONTINUE);
2571 	}
2572 }
2573 
2574 static int
2575 pcicfg_free_bridge_resources(dev_info_t *dip)
2576 {
2577 	ppb_ranges_t		*ranges;
2578 	uint_t			*bus;
2579 	int			k;
2580 	int			length = 0;
2581 	int			i;
2582 
2583 
2584 	if ((i = ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
2585 	    "ranges", (caddr_t)&ranges, &length)) != DDI_PROP_SUCCESS) {
2586 		DEBUG0("Failed to read ranges property\n");
2587 		if (ddi_get_child(dip)) {
2588 			cmn_err(CE_WARN, "No ranges property found for %s",
2589 			    ddi_get_name(dip));
2590 			/*
2591 			 * strictly speaking, we can check for children with
2592 			 * assigned-addresses but for now it is better to
2593 			 * be conservative and assume that if there are child
2594 			 * nodes, then they do consume PCI memory or IO
2595 			 * resources, Hence return failure.
2596 			 */
2597 			return (PCICFG_FAILURE);
2598 		}
2599 		length = 0;
2600 	}
2601 
2602 	for (i = 0; i < length / sizeof (ppb_ranges_t); i++) {
2603 		char *mem_type;
2604 
2605 		if (ranges[i].size_low != 0 || ranges[i].size_high != 0) {
2606 			switch (ranges[i].parent_high & PCI_REG_ADDR_M) {
2607 			case PCI_ADDR_IO:
2608 				DEBUG2("Free I/O    base/length = "
2609 				    "[0x%x]/[0x%x]\n", ranges[i].child_low,
2610 				    ranges[i].size_low);
2611 				if (ndi_ra_free(ddi_get_parent(dip),
2612 				    (uint64_t)ranges[i].child_low,
2613 				    (uint64_t)ranges[i].size_low,
2614 				    NDI_RA_TYPE_IO, NDI_RA_PASS)
2615 				    != NDI_SUCCESS) {
2616 					DEBUG0("Trouble freeing "
2617 					    "PCI i/o space\n");
2618 					kmem_free(ranges, length);
2619 					return (PCICFG_FAILURE);
2620 				}
2621 				break;
2622 			case PCI_ADDR_MEM32:
2623 			case PCI_ADDR_MEM64:
2624 				if (ranges[i].parent_high & PCI_REG_PF_M) {
2625 					DEBUG3("Free PF Memory base/length = "
2626 					    "[0x%x.0x%x]/[0x%x]\n",
2627 					    ranges[i].child_mid,
2628 					    ranges[i].child_low,
2629 					    ranges[i].size_low);
2630 					mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
2631 				} else {
2632 					DEBUG3("Free Memory base/length"
2633 					    " = [0x%x.0x%x]/[0x%x]\n",
2634 					    ranges[i].child_mid,
2635 					    ranges[i].child_low,
2636 					    ranges[i].size_low)
2637 					mem_type = NDI_RA_TYPE_MEM;
2638 				}
2639 				if (ndi_ra_free(ddi_get_parent(dip),
2640 				    PCICFG_LADDR(ranges[i].child_low,
2641 				    ranges[i].child_mid),
2642 				    (uint64_t)ranges[i].size_low,
2643 				    mem_type, NDI_RA_PASS) != NDI_SUCCESS) {
2644 					DEBUG0("Trouble freeing "
2645 					    "PCI memory space\n");
2646 					kmem_free(ranges, length);
2647 					return (PCICFG_FAILURE);
2648 				}
2649 				break;
2650 			default:
2651 				DEBUG0("Unknown memory space\n");
2652 				break;
2653 			}
2654 		}
2655 	}
2656 
2657 	if (length)
2658 		kmem_free(ranges, length);
2659 
2660 	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
2661 	    "bus-range", (caddr_t)&bus, &k) != DDI_PROP_SUCCESS) {
2662 		DEBUG0("Failed to read bus-range property\n");
2663 		return (PCICFG_FAILURE);
2664 	}
2665 
2666 	DEBUG2("Need to free bus [%d] range [%d]\n",
2667 	    bus[0], bus[1] - bus[0] + 1);
2668 
2669 	if (ndi_ra_free(ddi_get_parent(dip), (uint64_t)bus[0],
2670 	    (uint64_t)(bus[1] - bus[0] + 1), NDI_RA_TYPE_PCI_BUSNUM,
2671 	    NDI_RA_PASS) != NDI_SUCCESS) {
2672 		DEBUG0("Failed to free a bus number\n");
2673 		kmem_free(bus, k);
2674 		return (PCICFG_FAILURE);
2675 	}
2676 
2677 	kmem_free(bus, k);
2678 	return (PCICFG_SUCCESS);
2679 }
2680 
2681 static int
2682 pcicfg_free_device_resources(dev_info_t *dip)
2683 {
2684 	pci_regspec_t *assigned;
2685 
2686 	int length;
2687 	int acount;
2688 	int i;
2689 
2690 	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
2691 	    "assigned-addresses", (caddr_t)&assigned, &length)
2692 	    != DDI_PROP_SUCCESS) {
2693 		DEBUG0("Failed to read assigned-addresses property\n");
2694 		return (PCICFG_FAILURE);
2695 	}
2696 
2697 	/*
2698 	 * For each "assigned-addresses" property entry with a length,
2699 	 * call the memory allocation routines to return the
2700 	 * resource.
2701 	 */
2702 	acount = length / sizeof (pci_regspec_t);
2703 	for (i = 0; i < acount; i++) {
2704 		char *mem_type;
2705 
2706 		/*
2707 		 * Free the resource if the size of it is not zero.
2708 		 */
2709 		if ((assigned[i].pci_size_low != 0)||
2710 		    (assigned[i].pci_size_hi != 0)) {
2711 			switch (PCI_REG_ADDR_G(assigned[i].pci_phys_hi)) {
2712 			case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
2713 				/*
2714 				 * Check the assigned address for zero.
2715 				 * (Workaround for Devconf (x86) bug to
2716 				 * skip bogus entry for ROM base address
2717 				 * register. If the assigned address is
2718 				 * zero then ignore the entry
2719 				 * (see bugid 4281306)).
2720 				 */
2721 				if (assigned[i].pci_phys_low == 0)
2722 					break; /* ignore the entry */
2723 
2724 				if (assigned[i].pci_phys_hi & PCI_REG_PF_M)
2725 					mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
2726 				else
2727 					mem_type = NDI_RA_TYPE_MEM;
2728 
2729 				if (ndi_ra_free(ddi_get_parent(dip),
2730 				    (uint64_t)assigned[i].pci_phys_low,
2731 				    (uint64_t)assigned[i].pci_size_low,
2732 				    mem_type, NDI_RA_PASS) != NDI_SUCCESS) {
2733 					DEBUG0("Trouble freeing "
2734 					    "PCI memory space\n");
2735 					kmem_free(assigned, length);
2736 					return (PCICFG_FAILURE);
2737 				}
2738 
2739 				DEBUG4("Returned 0x%x of 32 bit %s space"
2740 				    " @ 0x%x from register 0x%x\n",
2741 				    assigned[i].pci_size_low, mem_type,
2742 				    assigned[i].pci_phys_low,
2743 				    PCI_REG_REG_G(assigned[i].pci_phys_hi));
2744 
2745 			break;
2746 			case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
2747 				if (assigned[i].pci_phys_hi & PCI_REG_PF_M)
2748 					mem_type = NDI_RA_TYPE_PCI_PREFETCH_MEM;
2749 				else
2750 					mem_type = NDI_RA_TYPE_MEM;
2751 
2752 				if (ndi_ra_free(ddi_get_parent(dip),
2753 				    PCICFG_LADDR(assigned[i].pci_phys_low,
2754 				    assigned[i].pci_phys_mid),
2755 				    (uint64_t)assigned[i].pci_size_low,
2756 				    mem_type, NDI_RA_PASS) != NDI_SUCCESS) {
2757 					DEBUG0("Trouble freeing "
2758 					    "PCI memory space\n");
2759 					kmem_free(assigned, length);
2760 					return (PCICFG_FAILURE);
2761 				}
2762 
2763 				DEBUG5("Returned 0x%x of 64 bit %s space"
2764 				    " @ 0x%x.0x%x from register 0x%x\n",
2765 				    assigned[i].pci_size_low,
2766 				    mem_type, assigned[i].pci_phys_mid,
2767 				    assigned[i].pci_phys_low,
2768 				    PCI_REG_REG_G(assigned[i].pci_phys_hi));
2769 
2770 			break;
2771 			case PCI_REG_ADDR_G(PCI_ADDR_IO):
2772 				if (ndi_ra_free(ddi_get_parent(dip),
2773 				    (uint64_t)assigned[i].pci_phys_low,
2774 				    (uint64_t)assigned[i].pci_size_low,
2775 				    NDI_RA_TYPE_IO, NDI_RA_PASS) !=
2776 				    NDI_SUCCESS) {
2777 					DEBUG0("Trouble freeing "
2778 					    "PCI IO space\n");
2779 					kmem_free(assigned, length);
2780 					return (PCICFG_FAILURE);
2781 				}
2782 				DEBUG3("Returned 0x%x of IO space @ 0x%x from "
2783 				    "register 0x%x\n", assigned[i].pci_size_low,
2784 				    assigned[i].pci_phys_low,
2785 				    PCI_REG_REG_G(assigned[i].pci_phys_hi));
2786 			break;
2787 			default:
2788 				DEBUG0("Unknown register type\n");
2789 				kmem_free(assigned, length);
2790 				return (PCICFG_FAILURE);
2791 			} /* switch */
2792 		}
2793 	}
2794 	kmem_free(assigned, length);
2795 	return (PCICFG_SUCCESS);
2796 }
2797 
2798 static int
2799 pcicfg_free_resources(dev_info_t *dip, pcicfg_flags_t flags)
2800 {
2801 	ddi_acc_handle_t handle;
2802 	uint8_t header_type;
2803 
2804 	if (pci_config_setup(dip, &handle) != DDI_SUCCESS) {
2805 		DEBUG0("Failed to map config space!\n");
2806 		return (PCICFG_FAILURE);
2807 	}
2808 
2809 	header_type = pci_config_get8(handle, PCI_CONF_HEADER);
2810 
2811 	(void) pci_config_teardown(&handle);
2812 
2813 	/*
2814 	 * A different algorithm is used for bridges and leaf devices.
2815 	 */
2816 	if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_PPB) {
2817 		/*
2818 		 * We only support readonly probing for leaf devices.
2819 		 */
2820 		if (flags & PCICFG_FLAG_READ_ONLY)
2821 			return (PCICFG_FAILURE);
2822 
2823 		if (pcicfg_free_bridge_resources(dip) != PCICFG_SUCCESS) {
2824 			DEBUG0("Failed freeing up bridge resources\n");
2825 			return (PCICFG_FAILURE);
2826 		}
2827 	} else {
2828 		if (pcicfg_free_device_resources(dip) != PCICFG_SUCCESS) {
2829 			DEBUG0("Failed freeing up device resources\n");
2830 			return (PCICFG_FAILURE);
2831 		}
2832 	}
2833 
2834 	return (PCICFG_SUCCESS);
2835 }
2836 
2837 #ifndef _DONT_USE_1275_GENERIC_NAMES
2838 static char *
2839 pcicfg_get_class_name(uint32_t classcode)
2840 {
2841 	struct pcicfg_name_entry *ptr;
2842 
2843 	for (ptr = &pcicfg_class_lookup[0]; ptr->name != NULL; ptr++) {
2844 		if (ptr->class_code == classcode) {
2845 			return (ptr->name);
2846 		}
2847 	}
2848 	return (NULL);
2849 }
2850 #endif /* _DONT_USE_1275_GENERIC_NAMES */
2851 
2852 static dev_info_t *
2853 pcicfg_devi_find(dev_info_t *dip, uint_t device, uint_t function)
2854 {
2855 	struct pcicfg_find_ctrl ctrl;
2856 	int count;
2857 
2858 	ctrl.device = device;
2859 	ctrl.function = function;
2860 	ctrl.dip = NULL;
2861 
2862 	ndi_devi_enter(dip, &count);
2863 	ddi_walk_devs(ddi_get_child(dip), pcicfg_match_dev, (void *)&ctrl);
2864 	ndi_devi_exit(dip, count);
2865 
2866 	return (ctrl.dip);
2867 }
2868 
2869 static int
2870 pcicfg_match_dev(dev_info_t *dip, void *hdl)
2871 {
2872 	struct pcicfg_find_ctrl *ctrl = (struct pcicfg_find_ctrl *)hdl;
2873 	pci_regspec_t *pci_rp;
2874 	int length;
2875 	int pci_dev;
2876 	int pci_func;
2877 
2878 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
2879 	    "reg", (int **)&pci_rp, (uint_t *)&length) != DDI_PROP_SUCCESS) {
2880 		ctrl->dip = NULL;
2881 		return (DDI_WALK_TERMINATE);
2882 	}
2883 
2884 	/* get the PCI device address info */
2885 	pci_dev = PCI_REG_DEV_G(pci_rp->pci_phys_hi);
2886 	pci_func = PCI_REG_FUNC_G(pci_rp->pci_phys_hi);
2887 
2888 	/*
2889 	 * free the memory allocated by ddi_prop_lookup_int_array
2890 	 */
2891 	ddi_prop_free(pci_rp);
2892 
2893 
2894 	if ((pci_dev == ctrl->device) && (pci_func == ctrl->function)) {
2895 		/* found the match for the specified device address */
2896 		ctrl->dip = dip;
2897 		return (DDI_WALK_TERMINATE);
2898 	}
2899 
2900 	/*
2901 	 * continue the walk to the next sibling to look for a match.
2902 	 */
2903 	return (DDI_WALK_PRUNECHILD);
2904 }
2905 
2906 static int
2907 pcicfg_update_assigned_prop(dev_info_t *dip, pci_regspec_t *newone)
2908 {
2909 	int		alen;
2910 	pci_regspec_t	*assigned;
2911 	caddr_t		newreg;
2912 	uint_t		status;
2913 
2914 	status = ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
2915 	    "assigned-addresses", (caddr_t)&assigned, &alen);
2916 	switch (status) {
2917 		case DDI_PROP_SUCCESS:
2918 		break;
2919 		case DDI_PROP_NO_MEMORY:
2920 			DEBUG0("no memory for assigned-addresses property\n");
2921 			return (PCICFG_FAILURE);
2922 		default:
2923 			(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip,
2924 			    "assigned-addresses", (int *)newone,
2925 			    sizeof (*newone)/sizeof (int));
2926 			return (PCICFG_SUCCESS);
2927 	}
2928 
2929 	/*
2930 	 * Allocate memory for the existing
2931 	 * assigned-addresses(s) plus one and then
2932 	 * build it.
2933 	 */
2934 
2935 	newreg = kmem_zalloc(alen+sizeof (*newone), KM_SLEEP);
2936 
2937 	bcopy(assigned, newreg, alen);
2938 	bcopy(newone, newreg + alen, sizeof (*newone));
2939 
2940 	/*
2941 	 * Write out the new "assigned-addresses" spec
2942 	 */
2943 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip,
2944 	    "assigned-addresses", (int *)newreg,
2945 	    (alen + sizeof (*newone))/sizeof (int));
2946 
2947 	kmem_free((caddr_t)newreg, alen+sizeof (*newone));
2948 	kmem_free(assigned, alen);
2949 
2950 	return (PCICFG_SUCCESS);
2951 }
2952 
2953 static int
2954 pcicfg_update_ranges_prop(dev_info_t *dip, ppb_ranges_t *addition)
2955 {
2956 	int		rlen;
2957 	ppb_ranges_t	*ranges;
2958 	caddr_t		newreg;
2959 	uint_t		status;
2960 
2961 	status = ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
2962 	    "ranges", (caddr_t)&ranges, &rlen);
2963 
2964 
2965 	switch (status) {
2966 		case DDI_PROP_SUCCESS:
2967 			break;
2968 		case DDI_PROP_NO_MEMORY:
2969 			DEBUG0("ranges present, but unable to get memory\n");
2970 			return (PCICFG_FAILURE);
2971 		default:
2972 			DEBUG0("no ranges property - creating one\n");
2973 			if (ndi_prop_update_int_array(DDI_DEV_T_NONE,
2974 			    dip, "ranges", (int *)addition,
2975 			    sizeof (ppb_ranges_t)/sizeof (int))
2976 			    != DDI_SUCCESS) {
2977 				DEBUG0("Did'nt create ranges property\n");
2978 				return (PCICFG_FAILURE);
2979 			}
2980 			return (PCICFG_SUCCESS);
2981 	}
2982 
2983 	/*
2984 	 * Allocate memory for the existing ranges plus one and then
2985 	 * build it.
2986 	 */
2987 	newreg = kmem_zalloc(rlen+sizeof (ppb_ranges_t), KM_SLEEP);
2988 
2989 	bcopy(ranges, newreg, rlen);
2990 	bcopy(addition, newreg + rlen, sizeof (ppb_ranges_t));
2991 
2992 	/*
2993 	 * Write out the new "ranges" property
2994 	 */
2995 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "ranges",
2996 	    (int *)newreg, (rlen + sizeof (ppb_ranges_t))/sizeof (int));
2997 
2998 	DEBUG1("Updating ranges property for %d entries",
2999 	    rlen / sizeof (ppb_ranges_t) + 1);
3000 
3001 	kmem_free((caddr_t)newreg, rlen+sizeof (ppb_ranges_t));
3002 
3003 	kmem_free((caddr_t)ranges, rlen);
3004 
3005 	return (PCICFG_SUCCESS);
3006 }
3007 
3008 static int
3009 pcicfg_update_reg_prop(dev_info_t *dip, uint32_t regvalue, uint_t reg_offset)
3010 {
3011 	int		rlen;
3012 	pci_regspec_t	*reg;
3013 	caddr_t		newreg;
3014 	uint32_t	hiword;
3015 	pci_regspec_t	addition;
3016 	uint32_t	size;
3017 	uint_t		status;
3018 
3019 	status = ddi_getlongprop(DDI_DEV_T_ANY,
3020 	    dip, DDI_PROP_DONTPASS, "reg", (caddr_t)&reg, &rlen);
3021 
3022 	switch (status) {
3023 		case DDI_PROP_SUCCESS:
3024 		break;
3025 		case DDI_PROP_NO_MEMORY:
3026 			DEBUG0("reg present, but unable to get memory\n");
3027 			return (PCICFG_FAILURE);
3028 		default:
3029 			DEBUG0("no reg property\n");
3030 			return (PCICFG_FAILURE);
3031 	}
3032 
3033 	/*
3034 	 * Allocate memory for the existing reg(s) plus one and then
3035 	 * build it.
3036 	 */
3037 	newreg = kmem_zalloc(rlen+sizeof (pci_regspec_t), KM_SLEEP);
3038 
3039 	/*
3040 	 * Build the regspec, then add it to the existing one(s)
3041 	 */
3042 
3043 	hiword = PCICFG_MAKE_REG_HIGH(PCI_REG_BUS_G(reg->pci_phys_hi),
3044 	    PCI_REG_DEV_G(reg->pci_phys_hi),
3045 	    PCI_REG_FUNC_G(reg->pci_phys_hi), reg_offset);
3046 
3047 	if (reg_offset == PCI_CONF_ROM) {
3048 		size = (~(PCI_BASE_ROM_ADDR_M & regvalue))+1;
3049 		hiword |= PCI_ADDR_MEM32;
3050 	} else {
3051 		size = (~(PCI_BASE_M_ADDR_M & regvalue))+1;
3052 
3053 		if ((PCI_BASE_SPACE_M & regvalue) == PCI_BASE_SPACE_MEM) {
3054 			if ((PCI_BASE_TYPE_M & regvalue) == PCI_BASE_TYPE_MEM) {
3055 				hiword |= PCI_ADDR_MEM32;
3056 			} else if ((PCI_BASE_TYPE_M & regvalue)
3057 			    == PCI_BASE_TYPE_ALL) {
3058 				hiword |= PCI_ADDR_MEM64;
3059 			}
3060 			if (regvalue & PCI_BASE_PREF_M)
3061 				hiword |= PCI_REG_PF_M;
3062 		} else {
3063 			hiword |= PCI_ADDR_IO;
3064 		}
3065 	}
3066 
3067 	addition.pci_phys_hi = hiword;
3068 	addition.pci_phys_mid = 0;
3069 	addition.pci_phys_low = 0;
3070 	addition.pci_size_hi = 0;
3071 	addition.pci_size_low = size;
3072 
3073 	bcopy(reg, newreg, rlen);
3074 	bcopy(&addition, newreg + rlen, sizeof (pci_regspec_t));
3075 
3076 	DEBUG3("updating BAR@off %x with %x,%x\n", reg_offset, hiword, size);
3077 	/*
3078 	 * Write out the new "reg" property
3079 	 */
3080 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "reg",
3081 	    (int *)newreg, (rlen + sizeof (pci_regspec_t))/sizeof (int));
3082 
3083 	kmem_free((caddr_t)newreg, rlen+sizeof (pci_regspec_t));
3084 	kmem_free((caddr_t)reg, rlen);
3085 
3086 	return (PCICFG_SUCCESS);
3087 }
3088 
3089 static int
3090 pcicfg_update_assigned_prop_value(dev_info_t *dip, uint32_t size,
3091     uint32_t base, uint32_t base_hi, uint_t reg_offset)
3092 {
3093 	int		rlen;
3094 	pci_regspec_t	*reg;
3095 	uint32_t	hiword;
3096 	pci_regspec_t	addition;
3097 	uint_t		status;
3098 
3099 	status = ddi_getlongprop(DDI_DEV_T_ANY,
3100 	    dip, DDI_PROP_DONTPASS, "reg", (caddr_t)&reg, &rlen);
3101 
3102 	switch (status) {
3103 		case DDI_PROP_SUCCESS:
3104 		break;
3105 		case DDI_PROP_NO_MEMORY:
3106 			DEBUG0("reg present, but unable to get memory\n");
3107 			return (PCICFG_FAILURE);
3108 		default:
3109 			/*
3110 			 * Since the config space "reg" entry should have been
3111 			 * created, we expect a "reg" property already
3112 			 * present here.
3113 			 */
3114 			DEBUG0("no reg property\n");
3115 			return (PCICFG_FAILURE);
3116 	}
3117 
3118 	/*
3119 	 * Build the regspec, then add it to the existing one(s)
3120 	 */
3121 
3122 	hiword = PCICFG_MAKE_REG_HIGH(PCI_REG_BUS_G(reg->pci_phys_hi),
3123 	    PCI_REG_DEV_G(reg->pci_phys_hi),
3124 	    PCI_REG_FUNC_G(reg->pci_phys_hi), reg_offset);
3125 
3126 	hiword |= PCI_REG_REL_M;
3127 
3128 	if (reg_offset == PCI_CONF_ROM) {
3129 		hiword |= PCI_ADDR_MEM32;
3130 
3131 		base = PCI_BASE_ROM_ADDR_M & base;
3132 	} else {
3133 		if ((PCI_BASE_SPACE_M & base) == PCI_BASE_SPACE_MEM) {
3134 			if ((PCI_BASE_TYPE_M & base) == PCI_BASE_TYPE_MEM) {
3135 				hiword |= PCI_ADDR_MEM32;
3136 			} else if ((PCI_BASE_TYPE_M & base)
3137 			    == PCI_BASE_TYPE_ALL) {
3138 				hiword |= PCI_ADDR_MEM64;
3139 			}
3140 			if (base & PCI_BASE_PREF_M)
3141 				hiword |= PCI_REG_PF_M;
3142 
3143 			base = PCI_BASE_M_ADDR_M & base;
3144 		} else {
3145 			hiword |= PCI_ADDR_IO;
3146 
3147 			base = PCI_BASE_IO_ADDR_M & base;
3148 			base_hi = 0;
3149 		}
3150 	}
3151 
3152 	addition.pci_phys_hi = hiword;
3153 	addition.pci_phys_mid = base_hi;
3154 	addition.pci_phys_low = base;
3155 	addition.pci_size_hi = 0;
3156 	addition.pci_size_low = size;
3157 
3158 	DEBUG3("updating BAR@off %x with %x,%x\n", reg_offset, hiword, size);
3159 
3160 	kmem_free((caddr_t)reg, rlen);
3161 
3162 	return (pcicfg_update_assigned_prop(dip, &addition));
3163 }
3164 
3165 static void
3166 pcicfg_device_on(ddi_acc_handle_t config_handle)
3167 {
3168 	/*
3169 	 * Enable memory, IO, and bus mastership
3170 	 * XXX should we enable parity, SERR#,
3171 	 * fast back-to-back, and addr. stepping?
3172 	 */
3173 	pci_config_put16(config_handle, PCI_CONF_COMM,
3174 	    pci_config_get16(config_handle, PCI_CONF_COMM) | 0x7);
3175 }
3176 
3177 static void
3178 pcicfg_device_off(ddi_acc_handle_t config_handle)
3179 {
3180 	/*
3181 	 * Disable I/O and memory traffic through the bridge
3182 	 */
3183 	pci_config_put16(config_handle, PCI_CONF_COMM, 0x0);
3184 }
3185 
3186 /*
3187  * Setup the basic 1275 properties based on information found in the config
3188  * header of the PCI device
3189  */
3190 static int
3191 pcicfg_set_standard_props(dev_info_t *dip, ddi_acc_handle_t config_handle,
3192 	uint8_t pcie_dev)
3193 {
3194 	int ret;
3195 	uint16_t cap_id_loc, val;
3196 	uint32_t wordval;
3197 	uint8_t byteval;
3198 
3199 	/* These two exists only for non-bridges */
3200 	if (((pci_config_get8(config_handle, PCI_CONF_HEADER) &
3201 	    PCI_HEADER_TYPE_M) == PCI_HEADER_ZERO) && !pcie_dev) {
3202 		byteval = pci_config_get8(config_handle, PCI_CONF_MIN_G);
3203 		if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3204 		    "min-grant", byteval)) != DDI_SUCCESS) {
3205 			return (ret);
3206 		}
3207 
3208 		byteval = pci_config_get8(config_handle, PCI_CONF_MAX_L);
3209 		if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3210 		    "max-latency", byteval)) != DDI_SUCCESS) {
3211 			return (ret);
3212 		}
3213 	}
3214 
3215 	/*
3216 	 * These should always exist and have the value of the
3217 	 * corresponding register value
3218 	 */
3219 	val = pci_config_get16(config_handle, PCI_CONF_VENID);
3220 
3221 	if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, "vendor-id", val))
3222 	    != DDI_SUCCESS) {
3223 		return (ret);
3224 	}
3225 	val = pci_config_get16(config_handle, PCI_CONF_DEVID);
3226 	if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, "device-id", val))
3227 	    != DDI_SUCCESS) {
3228 		return (ret);
3229 	}
3230 	byteval = pci_config_get8(config_handle, PCI_CONF_REVID);
3231 	if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3232 	    "revision-id", byteval)) != DDI_SUCCESS) {
3233 		return (ret);
3234 	}
3235 
3236 	wordval = (pci_config_get16(config_handle, PCI_CONF_SUBCLASS)<< 8) |
3237 	    (pci_config_get8(config_handle, PCI_CONF_PROGCLASS));
3238 
3239 	if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3240 	    "class-code", wordval)) != DDI_SUCCESS) {
3241 		return (ret);
3242 	}
3243 	val = (pci_config_get16(config_handle, PCI_CONF_STAT) &
3244 	    PCI_STAT_DEVSELT);
3245 	if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3246 	    "devsel-speed", val)) != DDI_SUCCESS) {
3247 		return (ret);
3248 	}
3249 
3250 	/*
3251 	 * The next three are bits set in the status register.  The property is
3252 	 * present (but with no value other than its own existence) if the bit
3253 	 * is set, non-existent otherwise
3254 	 */
3255 	if ((!pcie_dev) &&
3256 	    (pci_config_get16(config_handle, PCI_CONF_STAT) & PCI_STAT_FBBC)) {
3257 		if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3258 		    "fast-back-to-back", 0)) != DDI_SUCCESS) {
3259 			return (ret);
3260 		}
3261 	}
3262 	if ((!pcie_dev) &&
3263 	    (pci_config_get16(config_handle, PCI_CONF_STAT) & PCI_STAT_66MHZ)) {
3264 		if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3265 		    "66mhz-capable", 0)) != DDI_SUCCESS) {
3266 			return (ret);
3267 		}
3268 	}
3269 	if (pci_config_get16(config_handle, PCI_CONF_STAT) & PCI_STAT_UDF) {
3270 		if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3271 		    "udf-supported", 0)) != DDI_SUCCESS) {
3272 			return (ret);
3273 		}
3274 	}
3275 
3276 	/*
3277 	 * These next three are optional and are not present
3278 	 * if the corresponding register is zero.  If the value
3279 	 * is non-zero then the property exists with the value
3280 	 * of the register.
3281 	 */
3282 	if ((val = pci_config_get16(config_handle, PCI_CONF_SUBVENID)) != 0) {
3283 		if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3284 		    "subsystem-vendor-id", val)) != DDI_SUCCESS) {
3285 			return (ret);
3286 		}
3287 	}
3288 	if ((val = pci_config_get16(config_handle, PCI_CONF_SUBSYSID)) != 0) {
3289 		if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3290 		    "subsystem-id", val)) != DDI_SUCCESS) {
3291 			return (ret);
3292 		}
3293 	}
3294 	if ((val = pci_config_get16(config_handle, PCI_CONF_CACHE_LINESZ))
3295 	    != 0) {
3296 		if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3297 		    "cache-line-size", val)) != DDI_SUCCESS) {
3298 			return (ret);
3299 		}
3300 	}
3301 
3302 	/*
3303 	 * If the Interrupt Pin register is non-zero then the
3304 	 * interrupts property exists
3305 	 */
3306 	if ((byteval = pci_config_get8(config_handle, PCI_CONF_IPIN)) != 0) {
3307 		/*
3308 		 * If interrupt pin is non-zero,
3309 		 * record the interrupt line used
3310 		 */
3311 		if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3312 		    "interrupts", byteval)) != DDI_SUCCESS) {
3313 			return (ret);
3314 		}
3315 	}
3316 	(void) PCI_CAP_LOCATE(config_handle, PCI_CAP_ID_PCI_E, &cap_id_loc);
3317 	if (pcie_dev && cap_id_loc != PCI_CAP_NEXT_PTR_NULL) {
3318 		val = pci_config_get16(config_handle, cap_id_loc + PCIE_PCIECAP)
3319 		    & PCIE_PCIECAP_SLOT_IMPL;
3320 		/* if slot implemented, get physical slot number */
3321 		if (val) {
3322 			wordval = pci_config_get32(config_handle, cap_id_loc +
3323 			    PCIE_SLOTCAP);
3324 			/* create the property only if slotnum set correctly? */
3325 			if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3326 			    "physical-slot#", PCIE_SLOTCAP_PHY_SLOT_NUM(
3327 			    wordval))) != DDI_SUCCESS) {
3328 				return (ret);
3329 			}
3330 		}
3331 	}
3332 
3333 	return (PCICFG_SUCCESS);
3334 }
3335 
3336 static int
3337 pcicfg_set_busnode_props(dev_info_t *dip, uint8_t pcie_device_type)
3338 {
3339 	int ret;
3340 	char device_type[8];
3341 
3342 	if (pcie_device_type)
3343 		(void) strcpy(device_type, "pciex");
3344 	else
3345 		(void) strcpy(device_type, "pci");
3346 
3347 	if ((ret = ndi_prop_update_string(DDI_DEV_T_NONE, dip,
3348 	    "device_type", device_type)) != DDI_SUCCESS) {
3349 		return (ret);
3350 	}
3351 	if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip,
3352 	    "#address-cells", 3)) != DDI_SUCCESS) {
3353 		return (ret);
3354 	}
3355 	if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, "#size-cells", 2))
3356 	    != DDI_SUCCESS) {
3357 		return (ret);
3358 	}
3359 	return (PCICFG_SUCCESS);
3360 }
3361 
3362 static int
3363 pcicfg_set_childnode_props(dev_info_t *dip, ddi_acc_handle_t config_handle,
3364 		uint8_t pcie_dev)
3365 {
3366 
3367 	int		ret;
3368 	char		*name;
3369 	char		buffer[64], pprefix[8], nprefix[8];
3370 	uint16_t	classcode;
3371 	uint8_t		revid, pif, pclass, psubclass;
3372 	char		*compat[24];
3373 	int		i;
3374 	int		n;
3375 	uint16_t		sub_vid, sub_sid, vid, did;
3376 	/* set the property prefix based on the device type */
3377 	if (pcie_dev) {
3378 		(void) sprintf(pprefix, "pciex");
3379 	} else
3380 		(void) sprintf(pprefix, "pci");
3381 
3382 	/* set the prefix right for name property */
3383 	/* x86 platforms need to go with pci for upgrade purposes */
3384 	(void) sprintf(nprefix, "pci");
3385 
3386 	/*
3387 	 * NOTE: These are for both a child and PCI-PCI bridge node
3388 	 */
3389 	sub_vid = pci_config_get16(config_handle, PCI_CONF_SUBVENID);
3390 	sub_sid = pci_config_get16(config_handle, PCI_CONF_SUBSYSID);
3391 	vid = pci_config_get16(config_handle, PCI_CONF_VENID);
3392 	did = pci_config_get16(config_handle, PCI_CONF_DEVID);
3393 	revid = pci_config_get8(config_handle, PCI_CONF_REVID);
3394 	pif = pci_config_get8(config_handle, PCI_CONF_PROGCLASS);
3395 	classcode = pci_config_get16(config_handle, PCI_CONF_SUBCLASS);
3396 	pclass = pci_config_get8(config_handle, PCI_CONF_BASCLASS);
3397 	psubclass = pci_config_get8(config_handle, PCI_CONF_SUBCLASS);
3398 
3399 	if (!sub_vid)
3400 		(void) sprintf(buffer, "%s%x,%x", nprefix, vid, did);
3401 	else
3402 		(void) sprintf(buffer, "%s%x,%x", nprefix, sub_vid, sub_sid);
3403 
3404 	/*
3405 	 * In some environments, trying to use "generic" 1275 names is
3406 	 * not the convention.  In those cases use the name as created
3407 	 * above.  In all the rest of the cases, check to see if there
3408 	 * is a generic name first.
3409 	 */
3410 #ifdef _DONT_USE_1275_GENERIC_NAMES
3411 	name = buffer;
3412 #else
3413 	if ((name = pcicfg_get_class_name(classcode)) == NULL) {
3414 		/*
3415 		 * Set name to the above fabricated name
3416 		 */
3417 		name = buffer;
3418 	}
3419 #endif
3420 
3421 	/*
3422 	 * The node name field needs to be filled in with the name
3423 	 */
3424 	if (ndi_devi_set_nodename(dip, name, 0) != NDI_SUCCESS) {
3425 		DEBUG0("Failed to set nodename for node\n");
3426 		return (PCICFG_FAILURE);
3427 	}
3428 
3429 	/*
3430 	 * Create the compatible property as an array of pointers
3431 	 * to strings.  Start with the buffer created above.
3432 	 */
3433 	n = 0;
3434 
3435 	/*
3436 	 * Setup 'compatible' as per the PCI2.1 bindings document.
3437 	 *	pci[ex]VVVV,DDDD.SSSS.ssss.RR
3438 	 *	pci[ex]VVVV,DDDD.SSSS.ssss
3439 	 *	pciSSSS.ssss  -> not created for PCIe as per PCIe bindings
3440 	 *	pci[ex]VVVV,DDDD.RR
3441 	 *	pci[ex]VVVV,DDDD
3442 	 *	pci[ex]class,CCSSPP
3443 	 *	pci[ex]class,CCSS
3444 	 * Add legacy entries for compatibility with legacy devices and OS
3445 	 * for x86.
3446 	 *	pciVVVV,DDDD.SSSS.ssss.RR
3447 	 *	pciVVVV,DDDD.SSSS.ssss
3448 	 *	pciSSSS.ssss
3449 	 *	pciVVVV,DDDD.RR
3450 	 *	pciVVVV,DDDD
3451 	 *	pciclass,CCSSPP
3452 	 *	pciclass,CCSS
3453 	 */
3454 
3455 	do {
3456 		if (sub_vid) {
3457 			/* pci[ex]VVVV,DDDD.SSSS.ssss.RR */
3458 			(void) sprintf(buffer, "%s%x,%x.%x.%x.%x", pprefix, vid,
3459 			    did, sub_vid, sub_sid, revid);
3460 			compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP);
3461 			(void) strcpy(compat[n++], buffer);
3462 
3463 			/* pci[ex]VVVV,DDDD.SSSS.ssss */
3464 			(void) sprintf(buffer, "%s%x,%x.%x.%x", pprefix,  vid,
3465 			    did, sub_vid, sub_sid);
3466 			compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP);
3467 			(void) strcpy(compat[n++], buffer);
3468 
3469 			/* pciSSSS.ssss  -> not created for PCIe as per PCIe */
3470 			/* binding to IEEE 1275 spec.			 */
3471 			if (!pcie_dev && pcicfg_do_legacy_props) {
3472 				(void) sprintf(buffer, "pci%x,%x", sub_vid,
3473 				    sub_sid);
3474 				compat[n] = kmem_alloc(strlen(buffer) + 1,
3475 				    KM_SLEEP);
3476 				(void) strcpy(compat[n++], buffer);
3477 			}
3478 		}
3479 
3480 		/* pci[ex]VVVV,DDDD.RR */
3481 		(void) sprintf(buffer, "%s%x,%x.%x", pprefix,  vid, did, revid);
3482 		compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP);
3483 		(void) strcpy(compat[n++], buffer);
3484 
3485 		/* pci[ex]VVVV,DDDD */
3486 		(void) sprintf(buffer, "%s%x,%x", pprefix, vid, did);
3487 		compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP);
3488 		(void) strcpy(compat[n++], buffer);
3489 
3490 		/* pci[ex]class,CCSSPP */
3491 		(void) sprintf(buffer, "%sclass,%02x%02x%02x", pprefix, pclass,
3492 		    psubclass, pif);
3493 		compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP);
3494 		(void) strcpy(compat[n++], buffer);
3495 
3496 		/* pci[ex]class,CCSS */
3497 		(void) sprintf(buffer, "%sclass,%04x", pprefix, classcode);
3498 		compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP);
3499 		(void) strcpy(compat[n++], buffer);
3500 
3501 		if (!pcie_dev)
3502 			break;
3503 
3504 		/* also add compatible names using "pci" prefix */
3505 		(void) sprintf(pprefix, "pci");
3506 		pcie_dev = 0;
3507 
3508 	} while (pcicfg_do_legacy_props);
3509 
3510 	ret = ndi_prop_update_string_array(DDI_DEV_T_NONE, dip, "compatible",
3511 	    (char **)compat, n);
3512 
3513 	for (i = 0; i < n; i++) {
3514 		kmem_free(compat[i], strlen(compat[i]) + 1);
3515 	}
3516 
3517 	return (ret);
3518 }
3519 
3520 /*
3521  * Program the bus numbers into the bridge
3522  */
3523 static void
3524 pcicfg_set_bus_numbers(ddi_acc_handle_t config_handle,
3525 uint_t primary, uint_t secondary, uint_t subordinate)
3526 {
3527 	DEBUG3("Setting bridge bus-range %d,%d,%d\n", primary, secondary,
3528 	    subordinate);
3529 	/*
3530 	 * Primary bus#
3531 	 */
3532 	pci_config_put8(config_handle, PCI_BCNF_PRIBUS, primary);
3533 
3534 	/*
3535 	 * Secondary bus#
3536 	 */
3537 	pci_config_put8(config_handle, PCI_BCNF_SECBUS, secondary);
3538 
3539 	/*
3540 	 * Set the subordinate bus number to ff in order to pass through any
3541 	 * type 1 cycle with a bus number higher than the secondary bus#
3542 	 */
3543 	pci_config_put8(config_handle, PCI_BCNF_SUBBUS, subordinate);
3544 }
3545 
3546 /*
3547  * Put bridge registers into initial state
3548  */
3549 static void
3550 pcicfg_setup_bridge(pcicfg_phdl_t *entry,
3551 	ddi_acc_handle_t handle)
3552 {
3553 	/*
3554 	 * The highest bus seen during probing is the max-subordinate bus
3555 	 */
3556 	pci_config_put8(handle, PCI_BCNF_SUBBUS, entry->highest_bus);
3557 
3558 	/*
3559 	 * Reset the secondary bus
3560 	 */
3561 	pci_config_put16(handle, PCI_BCNF_BCNTRL,
3562 	    pci_config_get16(handle, PCI_BCNF_BCNTRL) | 0x40);
3563 	drv_usecwait(1000);
3564 	pci_config_put16(handle, PCI_BCNF_BCNTRL,
3565 	    pci_config_get16(handle, PCI_BCNF_BCNTRL) & ~0x40);
3566 	drv_usecwait(1000);
3567 
3568 	/*
3569 	 * Program the memory base register with the
3570 	 * start of the memory range
3571 	 */
3572 	pci_config_put16(handle, PCI_BCNF_MEM_BASE,
3573 	    PCICFG_HIWORD(PCICFG_LOADDR(entry->memory_last)));
3574 
3575 	/*
3576 	 * Program the I/O base register with the start of the I/O range
3577 	 */
3578 	pci_config_put8(handle, PCI_BCNF_IO_BASE_LOW,
3579 	    PCICFG_HIBYTE(PCICFG_LOWORD(PCICFG_LOADDR(entry->io_last))));
3580 	pci_config_put16(handle, PCI_BCNF_IO_BASE_HI,
3581 	    PCICFG_HIWORD(PCICFG_LOADDR(entry->io_last)));
3582 
3583 	/*
3584 	 * Program the PF memory base register with the start of
3585 	 * PF memory range
3586 	 */
3587 	pci_config_put16(handle, PCI_BCNF_PF_BASE_LOW,
3588 	    PCICFG_HIWORD(PCICFG_LOADDR(entry->pf_memory_last)));
3589 	pci_config_put32(handle, PCI_BCNF_PF_BASE_HIGH,
3590 	    PCICFG_HIADDR(entry->pf_memory_last));
3591 
3592 	/*
3593 	 * Clear status bits
3594 	 */
3595 	pci_config_put16(handle, PCI_BCNF_SEC_STATUS, 0xffff);
3596 
3597 	/*
3598 	 * Needs to be set to this value
3599 	 */
3600 	pci_config_put8(handle, PCI_CONF_ILINE, 0xf);
3601 
3602 	/*
3603 	 * XXX - may be delay should be used since noone configures
3604 	 * devices in the interrupt context
3605 	 */
3606 	drv_usecwait(pcicfg_sec_reset_delay);	/* 1 sec wait */
3607 }
3608 
3609 static void
3610 pcicfg_update_bridge(pcicfg_phdl_t *entry,
3611 	ddi_acc_handle_t handle)
3612 {
3613 	uint_t length;
3614 
3615 	/*
3616 	 * Program the memory limit register with the end of the memory range
3617 	 */
3618 
3619 	DEBUG1("DOWN ROUNDED ===>[0x%x]\n",
3620 	    PCICFG_ROUND_DOWN(entry->memory_last, PCICFG_MEMGRAN));
3621 
3622 	pci_config_put16(handle, PCI_BCNF_MEM_LIMIT,
3623 	    PCICFG_HIWORD(PCICFG_LOADDR(
3624 	    PCICFG_ROUND_DOWN(entry->memory_last, PCICFG_MEMGRAN))));
3625 	/*
3626 	 * Since this is a bridge, the rest of this range will
3627 	 * be responded to by the bridge.  We have to round up
3628 	 * so no other device claims it.
3629 	 */
3630 	if ((length = (PCICFG_ROUND_UP(entry->memory_last, PCICFG_MEMGRAN)
3631 	    - entry->memory_last)) > 0) {
3632 		(void) pcicfg_get_mem(entry, length, NULL);
3633 		DEBUG1("Added [0x%x]at the top of the bridge (mem)\n", length);
3634 	}
3635 
3636 	/*
3637 	 * Program the PF memory limit register with the end of the memory range
3638 	 */
3639 
3640 	DEBUG1("DOWN ROUNDED ===>[0x%x]\n",
3641 	    PCICFG_ROUND_DOWN(entry->pf_memory_last, PCICFG_MEMGRAN));
3642 
3643 	pci_config_put16(handle, PCI_BCNF_PF_LIMIT_LOW,
3644 	    PCICFG_HIWORD(PCICFG_LOADDR(PCICFG_ROUND_DOWN(
3645 	    entry->pf_memory_last, PCICFG_MEMGRAN))));
3646 	pci_config_put32(handle, PCI_BCNF_PF_LIMIT_HIGH, PCICFG_HIADDR(
3647 	    PCICFG_ROUND_DOWN(entry->pf_memory_last, PCICFG_MEMGRAN)));
3648 	if ((length = (PCICFG_ROUND_UP(entry->pf_memory_last, PCICFG_MEMGRAN)
3649 	    - entry->pf_memory_last)) > 0) {
3650 		(void) pcicfg_get_pf_mem(entry, length, NULL);
3651 		DEBUG1("Added [0x%x]at the top of the bridge (PF mem)\n",
3652 		    length);
3653 	}
3654 
3655 	/*
3656 	 * Program the I/O limit register with the end of the I/O range
3657 	 */
3658 	pci_config_put8(handle, PCI_BCNF_IO_LIMIT_LOW,
3659 	    PCICFG_HIBYTE(PCICFG_LOWORD(
3660 	    PCICFG_LOADDR(PCICFG_ROUND_DOWN(entry->io_last, PCICFG_IOGRAN)))));
3661 
3662 	pci_config_put16(handle, PCI_BCNF_IO_LIMIT_HI, PCICFG_HIWORD(
3663 	    PCICFG_LOADDR(PCICFG_ROUND_DOWN(entry->io_last, PCICFG_IOGRAN))));
3664 
3665 	/*
3666 	 * Same as above for I/O space. Since this is a
3667 	 * bridge, the rest of this range will be responded
3668 	 * to by the bridge.  We have to round up so no
3669 	 * other device claims it.
3670 	 */
3671 	if ((length = (PCICFG_ROUND_UP(entry->io_last, PCICFG_IOGRAN)
3672 	    - entry->io_last)) > 0) {
3673 		(void) pcicfg_get_io(entry, length, NULL);
3674 		DEBUG1("Added [0x%x]at the top of the bridge (I/O)\n", length);
3675 	}
3676 }
3677 
3678 static int
3679 pcicfg_probe_children(dev_info_t *parent, uint_t bus, uint_t device,
3680     uint_t func, uint_t *highest_bus, pcicfg_flags_t flags, boolean_t is_pcie)
3681 {
3682 	dev_info_t		*new_child;
3683 	ddi_acc_handle_t	config_handle;
3684 	uint8_t			header_type, pcie_dev = 0;
3685 	int			ret = PCICFG_FAILURE;
3686 
3687 	/*
3688 	 * This node will be put immediately below
3689 	 * "parent". Allocate a blank device node.  It will either
3690 	 * be filled in or freed up based on further probing.
3691 	 */
3692 
3693 	ndi_devi_alloc_sleep(parent, DEVI_PSEUDO_NEXNAME,
3694 	    (pnode_t)DEVI_SID_NODEID, &new_child);
3695 
3696 	if (pcicfg_add_config_reg(new_child, bus, device, func)
3697 	    != DDI_SUCCESS) {
3698 		DEBUG0("pcicfg_probe_children():Failed to add candidate REG\n");
3699 		goto failedconfig;
3700 	}
3701 
3702 	if ((ret = pcicfg_config_setup(new_child, &config_handle))
3703 	    != PCICFG_SUCCESS) {
3704 		if (ret == PCICFG_NODEVICE) {
3705 			(void) ndi_devi_free(new_child);
3706 			return (ret);
3707 		}
3708 		DEBUG0("pcicfg_probe_children():"
3709 		"Failed to setup config space\n");
3710 		goto failedconfig;
3711 	}
3712 
3713 	if (is_pcie)
3714 		(void) pcie_init_bus(new_child, PCI_GETBDF(bus, device, func),
3715 		    PCIE_BUS_INITIAL);
3716 
3717 	/*
3718 	 * As soon as we have access to config space,
3719 	 * turn off device. It will get turned on
3720 	 * later (after memory is assigned).
3721 	 */
3722 	(void) pcicfg_device_off(config_handle);
3723 
3724 	/* check if we are PCIe device */
3725 	if (pcicfg_pcie_dev(new_child, config_handle) == DDI_SUCCESS) {
3726 		DEBUG0("PCIe device detected\n");
3727 		pcie_dev = 1;
3728 	}
3729 
3730 	/*
3731 	 * Set 1275 properties common to all devices
3732 	 */
3733 	if (pcicfg_set_standard_props(new_child, config_handle, pcie_dev)
3734 	    != PCICFG_SUCCESS) {
3735 		DEBUG0("Failed to set standard properties\n");
3736 		goto failedchild;
3737 	}
3738 
3739 	/*
3740 	 * Child node properties  NOTE: Both for PCI-PCI bridge and child node
3741 	 */
3742 	if (pcicfg_set_childnode_props(new_child, config_handle, pcie_dev)
3743 	    != PCICFG_SUCCESS) {
3744 		goto failedchild;
3745 	}
3746 
3747 	header_type = pci_config_get8(config_handle, PCI_CONF_HEADER);
3748 
3749 	/*
3750 	 * If this is not a multi-function card only probe function zero.
3751 	 */
3752 	if ((!(header_type & PCI_HEADER_MULTI)) && (func != 0)) {
3753 
3754 		ret = PCICFG_NODEVICE;
3755 		goto failedchild;
3756 	}
3757 
3758 	/*
3759 	 * Attach the child to its parent
3760 	 */
3761 	(void) i_ndi_config_node(new_child, DS_LINKED, 0);
3762 
3763 	DEVI_SET_PCI(new_child);
3764 
3765 	if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_PPB) {
3766 
3767 		DEBUG3("--Bridge found bus [0x%x] device[0x%x] func [0x%x]\n",
3768 		    bus, device, func);
3769 
3770 		/* Only support read-only probe for leaf device */
3771 		if (flags & PCICFG_FLAG_READ_ONLY)
3772 			goto failedchild;
3773 
3774 		ret = pcicfg_probe_bridge(new_child, config_handle, bus,
3775 		    highest_bus, is_pcie);
3776 		if (ret != PCICFG_SUCCESS) {
3777 			(void) pcicfg_free_bridge_resources(new_child);
3778 			goto failedchild;
3779 		}
3780 
3781 	} else {
3782 
3783 		DEBUG3("--Leaf device found bus [0x%x] device"
3784 		    "[0x%x] func [0x%x]\n", bus, device, func);
3785 
3786 		if (flags & PCICFG_FLAG_READ_ONLY) {
3787 			/*
3788 			 * with read-only probe, don't do any resource
3789 			 * allocation, just read the BARs and update props.
3790 			 */
3791 			ret = pcicfg_populate_props_from_bar(new_child,
3792 			    config_handle);
3793 			if (ret != PCICFG_SUCCESS)
3794 				goto failedchild;
3795 
3796 			/*
3797 			 * now allocate the resources, just remove the
3798 			 * resources from the parent busra pool.
3799 			 */
3800 			ret = pcicfg_device_assign_readonly(new_child);
3801 			if (ret != PCICFG_SUCCESS) {
3802 				(void) pcicfg_free_device_resources(new_child);
3803 				goto failedchild;
3804 			}
3805 
3806 		} else {
3807 			/*
3808 			 * update "reg" property by sizing the BARs.
3809 			 */
3810 			ret = pcicfg_populate_reg_props(new_child,
3811 			    config_handle);
3812 			if (ret != PCICFG_SUCCESS)
3813 				goto failedchild;
3814 
3815 			/* now allocate & program the resources */
3816 			ret = pcicfg_device_assign(new_child);
3817 			if (ret != PCICFG_SUCCESS) {
3818 				(void) pcicfg_free_device_resources(new_child);
3819 				goto failedchild;
3820 			}
3821 		}
3822 
3823 		(void) ndi_devi_bind_driver(new_child, 0);
3824 	}
3825 
3826 	(void) pcicfg_config_teardown(&config_handle);
3827 
3828 	/*
3829 	 * Properties have been setted up, so initialize the remaining
3830 	 * bus_t fields
3831 	 */
3832 	if (is_pcie)
3833 		(void) pcie_init_bus(new_child, 0, PCIE_BUS_FINAL);
3834 
3835 	return (PCICFG_SUCCESS);
3836 
3837 failedchild:
3838 	/*
3839 	 * XXX check if it should be taken offline (if online)
3840 	 */
3841 	(void) pcicfg_config_teardown(&config_handle);
3842 
3843 	if (is_pcie)
3844 		pcie_fini_bus(new_child, PCIE_BUS_FINAL);
3845 
3846 failedconfig:
3847 
3848 	(void) ndi_devi_free(new_child);
3849 	return (ret);
3850 }
3851 
3852 /*
3853  * Sizing the BARs and update "reg" property
3854  */
3855 static int
3856 pcicfg_populate_reg_props(dev_info_t *new_child,
3857     ddi_acc_handle_t config_handle)
3858 {
3859 	int		i;
3860 	uint32_t 	request;
3861 
3862 	i = PCI_CONF_BASE0;
3863 
3864 	while (i <= PCI_CONF_BASE5) {
3865 
3866 		pci_config_put32(config_handle, i, 0xffffffff);
3867 
3868 		request = pci_config_get32(config_handle, i);
3869 		/*
3870 		 * If its a zero length, don't do
3871 		 * any programming.
3872 		 */
3873 		if (request != 0) {
3874 			/*
3875 			 * Add to the "reg" property
3876 			 */
3877 			if (pcicfg_update_reg_prop(new_child,
3878 			    request, i) != PCICFG_SUCCESS) {
3879 				goto failedchild;
3880 			}
3881 		} else {
3882 			DEBUG1("BASE register [0x%x] asks for "
3883 			    "[0x0]=[0x0](32)\n", i);
3884 			i += 4;
3885 			continue;
3886 		}
3887 
3888 		/*
3889 		 * Increment by eight if it is 64 bit address space
3890 		 */
3891 		if ((PCI_BASE_TYPE_M & request) == PCI_BASE_TYPE_ALL) {
3892 			DEBUG3("BASE register [0x%x] asks for "
3893 			    "[0x%x]=[0x%x] (64)\n",
3894 			    i, request, (~(PCI_BASE_M_ADDR_M & request))+1);
3895 			i += 8;
3896 		} else {
3897 			DEBUG3("BASE register [0x%x] asks for "
3898 			    "[0x%x]=[0x%x](32)\n",
3899 			    i, request, (~(PCI_BASE_M_ADDR_M & request))+1);
3900 			i += 4;
3901 		}
3902 	}
3903 
3904 	/*
3905 	 * Get the ROM size and create register for it
3906 	 */
3907 	pci_config_put32(config_handle, PCI_CONF_ROM, 0xfffffffe);
3908 
3909 	request = pci_config_get32(config_handle, PCI_CONF_ROM);
3910 	/*
3911 	 * If its a zero length, don't do
3912 	 * any programming.
3913 	 */
3914 
3915 	if (request != 0) {
3916 		DEBUG3("BASE register [0x%x] asks for [0x%x]=[0x%x]\n",
3917 		    PCI_CONF_ROM, request,
3918 		    (~(PCI_BASE_ROM_ADDR_M & request)) + 1);
3919 		/*
3920 		 * Add to the "reg" property
3921 		 */
3922 		if (pcicfg_update_reg_prop(new_child, request, PCI_CONF_ROM)
3923 		    != PCICFG_SUCCESS) {
3924 			goto failedchild;
3925 		}
3926 	}
3927 
3928 	return (PCICFG_SUCCESS);
3929 
3930 failedchild:
3931 	return (PCICFG_FAILURE);
3932 }
3933 
3934 /*
3935  * Read the BARs and update properties. Used in virtual hotplug.
3936  */
3937 static int
3938 pcicfg_populate_props_from_bar(dev_info_t *new_child,
3939     ddi_acc_handle_t config_handle)
3940 {
3941 	uint32_t request, base, base_hi, size;
3942 	int i;
3943 
3944 	i = PCI_CONF_BASE0;
3945 
3946 	while (i <= PCI_CONF_BASE5) {
3947 		/*
3948 		 * determine the size of the address space
3949 		 */
3950 		base = pci_config_get32(config_handle, i);
3951 		pci_config_put32(config_handle, i, 0xffffffff);
3952 		request = pci_config_get32(config_handle, i);
3953 		pci_config_put32(config_handle, i, base);
3954 
3955 		/*
3956 		 * If its a zero length, don't do any programming.
3957 		 */
3958 		if (request != 0) {
3959 			/*
3960 			 * Add to the "reg" property
3961 			 */
3962 			if (pcicfg_update_reg_prop(new_child,
3963 			    request, i) != PCICFG_SUCCESS) {
3964 				goto failedchild;
3965 			}
3966 
3967 			if ((PCI_BASE_SPACE_IO & request) == 0 &&
3968 			    (PCI_BASE_TYPE_M & request) == PCI_BASE_TYPE_ALL) {
3969 				base_hi = pci_config_get32(config_handle, i+4);
3970 			} else {
3971 				base_hi = 0;
3972 			}
3973 			/*
3974 			 * Add to "assigned-addresses" property
3975 			 */
3976 			size = (~(PCI_BASE_M_ADDR_M & request))+1;
3977 			if (pcicfg_update_assigned_prop_value(new_child,
3978 			    size, base, base_hi, i) != PCICFG_SUCCESS) {
3979 				goto failedchild;
3980 			}
3981 		} else {
3982 			DEBUG1("BASE register [0x%x] asks for [0x0]=[0x0]"
3983 			    "(32)\n", i);
3984 			i += 4;
3985 			continue;
3986 		}
3987 
3988 		/*
3989 		 * Increment by eight if it is 64 bit address space
3990 		 */
3991 		if ((PCI_BASE_TYPE_M & request) == PCI_BASE_TYPE_ALL) {
3992 			DEBUG3("BASE register [0x%x] asks for [0x%x]=[0x%x]"
3993 			    "(64)\n", i, request,
3994 			    (~(PCI_BASE_M_ADDR_M & request)) + 1);
3995 			i += 8;
3996 		} else {
3997 			DEBUG3("BASE register [0x%x] asks for [0x%x]=[0x%x]"
3998 			    "(32)\n", i, request,
3999 			    (~(PCI_BASE_M_ADDR_M & request)) + 1);
4000 			i += 4;
4001 		}
4002 	}
4003 
4004 	/*
4005 	 * Get the ROM size and create register for it
4006 	 */
4007 	base = pci_config_get32(config_handle, PCI_CONF_ROM);
4008 	pci_config_put32(config_handle, PCI_CONF_ROM, 0xfffffffe);
4009 	request = pci_config_get32(config_handle, PCI_CONF_ROM);
4010 	pci_config_put32(config_handle, PCI_CONF_ROM, base);
4011 
4012 	/*
4013 	 * If its a zero length, don't do
4014 	 * any programming.
4015 	 */
4016 	if (request != 0) {
4017 		DEBUG3("BASE register [0x%x] asks for [0x%x]=[0x%x]\n",
4018 		    PCI_CONF_ROM, request,
4019 		    (~(PCI_BASE_ROM_ADDR_M & request)) + 1);
4020 		/*
4021 		 * Add to the "reg" property
4022 		 */
4023 		if (pcicfg_update_reg_prop(new_child, request, PCI_CONF_ROM)
4024 		    != PCICFG_SUCCESS) {
4025 			goto failedchild;
4026 		}
4027 		/*
4028 		 * Add to "assigned-addresses" property
4029 		 */
4030 		size = (~(PCI_BASE_ROM_ADDR_M & request))+1;
4031 		if (pcicfg_update_assigned_prop_value(new_child, size,
4032 		    base, 0, PCI_CONF_ROM) != PCICFG_SUCCESS) {
4033 			goto failedchild;
4034 		}
4035 	}
4036 
4037 	return (PCICFG_SUCCESS);
4038 
4039 failedchild:
4040 	return (PCICFG_FAILURE);
4041 }
4042 
4043 static int
4044 pcicfg_probe_bridge(dev_info_t *new_child, ddi_acc_handle_t h, uint_t bus,
4045     uint_t *highest_bus, boolean_t is_pcie)
4046 {
4047 	uint64_t next_bus;
4048 	uint_t new_bus, num_slots;
4049 	ndi_ra_request_t req;
4050 	int rval, i, j;
4051 	uint64_t mem_answer, io_answer, mem_base, io_base, mem_alen, io_alen;
4052 	uint64_t pf_mem_answer, pf_mem_base, pf_mem_alen;
4053 	uint64_t mem_size, io_size, pf_mem_size;
4054 	uint64_t mem_end, pf_mem_end, io_end;
4055 	uint64_t round_answer, round_len;
4056 	ppb_ranges_t range[PCICFG_RANGE_LEN];
4057 	int bus_range[2];
4058 	pcicfg_phdl_t phdl;
4059 	int count;
4060 	uint64_t pcibus_base, pcibus_alen;
4061 	uint64_t max_bus;
4062 	uint8_t pcie_device_type = 0;
4063 	uint_t pf_mem_supported = 0;
4064 	dev_info_t *new_device;
4065 	int trans_device;
4066 	int ari_mode = B_FALSE;
4067 	int max_function = PCI_MAX_FUNCTIONS;
4068 
4069 	io_answer = io_base = io_alen = io_size = 0;
4070 	pf_mem_answer = pf_mem_base = pf_mem_size = pf_mem_alen = 0;
4071 
4072 	/*
4073 	 * Set "device_type" to "pci", the actual type will be set later
4074 	 * by pcicfg_set_busnode_props() below. This is needed as the
4075 	 * pcicfg_ra_free() below would update "available" property based
4076 	 * on "device_type".
4077 	 *
4078 	 * This code can be removed later after PCI configurator is changed
4079 	 * to use PCIRM, which automatically update properties upon allocation
4080 	 * and free, at that time we'll be able to remove the code inside
4081 	 * ndi_ra_alloc/free() which currently updates "available" property
4082 	 * for pci/pcie devices in pcie fabric.
4083 	 */
4084 	if (ndi_prop_update_string(DDI_DEV_T_NONE, new_child,
4085 	    "device_type", "pci") != DDI_SUCCESS) {
4086 		DEBUG0("Failed to set \"device_type\" props\n");
4087 		return (PCICFG_FAILURE);
4088 	}
4089 
4090 	/*
4091 	 * setup resource maps for the bridge node
4092 	 */
4093 	if (ndi_ra_map_setup(new_child, NDI_RA_TYPE_PCI_BUSNUM)
4094 	    == NDI_FAILURE) {
4095 		DEBUG0("Can not setup resource map - NDI_RA_TYPE_PCI_BUSNUM\n");
4096 		rval = PCICFG_FAILURE;
4097 		goto cleanup;
4098 	}
4099 	if (ndi_ra_map_setup(new_child, NDI_RA_TYPE_MEM) == NDI_FAILURE) {
4100 		DEBUG0("Can not setup resource map - NDI_RA_TYPE_MEM\n");
4101 		rval = PCICFG_FAILURE;
4102 		goto cleanup;
4103 	}
4104 	if (ndi_ra_map_setup(new_child, NDI_RA_TYPE_IO) == NDI_FAILURE) {
4105 		DEBUG0("Can not setup resource map - NDI_RA_TYPE_IO\n");
4106 		rval = PCICFG_FAILURE;
4107 		goto cleanup;
4108 	}
4109 	if (ndi_ra_map_setup(new_child, NDI_RA_TYPE_PCI_PREFETCH_MEM) ==
4110 	    NDI_FAILURE) {
4111 		DEBUG0("Can not setup resource map -"
4112 		    " NDI_RA_TYPE_PCI_PREFETCH_MEM\n");
4113 		rval = PCICFG_FAILURE;
4114 		goto cleanup;
4115 	}
4116 
4117 	/*
4118 	 * Allocate bus range pool for the bridge.
4119 	 */
4120 	bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
4121 	req.ra_flags = (NDI_RA_ALLOC_BOUNDED | NDI_RA_ALLOC_PARTIAL_OK);
4122 	req.ra_boundbase = 0;
4123 	req.ra_boundlen = req.ra_len = (PCI_MAX_BUS_NUM -1);
4124 	req.ra_align_mask = 0;  /* no alignment needed */
4125 
4126 	rval = ndi_ra_alloc(ddi_get_parent(new_child), &req,
4127 	    &pcibus_base, &pcibus_alen, NDI_RA_TYPE_PCI_BUSNUM, NDI_RA_PASS);
4128 
4129 	if (rval != NDI_SUCCESS) {
4130 		if (rval == NDI_RA_PARTIAL_REQ) {
4131 			/*EMPTY*/
4132 			DEBUG0("NDI_RA_PARTIAL_REQ returned for bus range\n");
4133 		} else {
4134 			DEBUG0(
4135 			    "Failed to allocate bus range for bridge\n");
4136 			rval = PCICFG_NORESRC;
4137 			goto cleanup;
4138 		}
4139 	}
4140 
4141 	DEBUG2("Bus Range Allocated [base=%d] [len=%d]\n",
4142 	    pcibus_base, pcibus_alen);
4143 
4144 	/*
4145 	 * Put available bus range into the pool.
4146 	 * Take the first one for this bridge to use and don't give
4147 	 * to child.
4148 	 */
4149 	(void) ndi_ra_free(new_child, pcibus_base+1, pcibus_alen-1,
4150 	    NDI_RA_TYPE_PCI_BUSNUM, NDI_RA_PASS);
4151 
4152 	next_bus = pcibus_base;
4153 	max_bus = pcibus_base + pcibus_alen - 1;
4154 
4155 	new_bus = next_bus;
4156 
4157 	DEBUG1("NEW bus found  ->[%d]\n", new_bus);
4158 
4159 	/* Keep track of highest bus for subordinate bus programming */
4160 	*highest_bus = new_bus;
4161 
4162 	/*
4163 	 * Allocate (non-prefetchable) Memory Space for Bridge
4164 	 */
4165 	bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
4166 	req.ra_flags = (NDI_RA_ALLOC_BOUNDED | NDI_RA_ALLOC_PARTIAL_OK);
4167 	req.ra_boundbase = 0;
4168 	/*
4169 	 * limit the boundlen,len to a 32b quantity. It should be Ok to
4170 	 * lose alignment-based-size of resource due to this.
4171 	 */
4172 	req.ra_boundlen = PCICFG_4GIG_LIMIT;
4173 	req.ra_len = PCICFG_4GIG_LIMIT; /* Get as big as possible */
4174 	req.ra_align_mask =
4175 	    PCICFG_MEMGRAN - 1; /* 1M alignment on memory space */
4176 
4177 	rval = ndi_ra_alloc(ddi_get_parent(new_child), &req,
4178 	    &mem_answer, &mem_alen,  NDI_RA_TYPE_MEM, NDI_RA_PASS);
4179 
4180 	if (rval != NDI_SUCCESS) {
4181 		if (rval == NDI_RA_PARTIAL_REQ) {
4182 			/*EMPTY*/
4183 			DEBUG0("NDI_RA_PARTIAL_REQ returned\n");
4184 		} else {
4185 			DEBUG0(
4186 			    "Failed to allocate memory for bridge\n");
4187 			rval = PCICFG_NORESRC;
4188 			goto cleanup;
4189 		}
4190 	}
4191 
4192 	DEBUG3("Bridge Memory Allocated [0x%x.%x] len [0x%x]\n",
4193 	    PCICFG_HIADDR(mem_answer),
4194 	    PCICFG_LOADDR(mem_answer),
4195 	    mem_alen);
4196 
4197 	/*
4198 	 * Put available memory into the pool.
4199 	 */
4200 	(void) ndi_ra_free(new_child, mem_answer, mem_alen, NDI_RA_TYPE_MEM,
4201 	    NDI_RA_PASS);
4202 
4203 	mem_base = mem_answer;
4204 
4205 	/*
4206 	 * Allocate I/O Space for Bridge
4207 	 */
4208 	bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
4209 	req.ra_align_mask = PCICFG_IOGRAN - 1; /* 4k alignment */
4210 	req.ra_boundbase = 0;
4211 	req.ra_boundlen = PCICFG_4GIG_LIMIT;
4212 	req.ra_flags = (NDI_RA_ALLOC_BOUNDED | NDI_RA_ALLOC_PARTIAL_OK);
4213 	req.ra_len = PCICFG_4GIG_LIMIT; /* Get as big as possible */
4214 
4215 	rval = ndi_ra_alloc(ddi_get_parent(new_child), &req, &io_answer,
4216 	    &io_alen, NDI_RA_TYPE_IO, NDI_RA_PASS);
4217 
4218 	if (rval != NDI_SUCCESS) {
4219 		if (rval == NDI_RA_PARTIAL_REQ) {
4220 			/*EMPTY*/
4221 			DEBUG0("NDI_RA_PARTIAL_REQ returned\n");
4222 		} else {
4223 			DEBUG0("Failed to allocate io space for bridge\n");
4224 			/* i/o space is an optional requirement so continue */
4225 		}
4226 	}
4227 
4228 	DEBUG3("Bridge IO Space Allocated [0x%x.%x] len [0x%x]\n",
4229 	    PCICFG_HIADDR(io_answer), PCICFG_LOADDR(io_answer), io_alen);
4230 
4231 	/*
4232 	 * Put available I/O into the pool.
4233 	 */
4234 	(void) ndi_ra_free(new_child, io_answer, io_alen, NDI_RA_TYPE_IO,
4235 	    NDI_RA_PASS);
4236 
4237 	io_base = io_answer;
4238 
4239 	/*
4240 	 * Check if the bridge supports Prefetchable memory range.
4241 	 * If it does, then we setup PF memory range for the bridge.
4242 	 * Otherwise, we skip the step of setting up PF memory
4243 	 * range for it. This could cause config operation to
4244 	 * fail if any devices under the bridge need PF memory.
4245 	 */
4246 	/* write a non zero value to the PF BASE register */
4247 	pci_config_put16(h, PCI_BCNF_PF_BASE_LOW, 0xfff0);
4248 	/* if the read returns zero then PF range is not supported */
4249 	if (pci_config_get16(h, PCI_BCNF_PF_BASE_LOW) == 0) {
4250 		/* bridge doesn't support PF memory range */
4251 		goto pf_setup_end;
4252 	} else {
4253 		pf_mem_supported = 1;
4254 		/* reset the PF BASE register */
4255 		pci_config_put16(h, PCI_BCNF_PF_BASE_LOW, 0);
4256 	}
4257 
4258 	/*
4259 	 * Bridge supports PF mem range; Allocate PF Memory Space for it.
4260 	 *
4261 	 * Note: Both non-prefetchable and prefetchable memory space
4262 	 * allocations are made within 32bit space. Currently, BIOSs
4263 	 * allocate device memory for PCI devices within the 32bit space
4264 	 * so this will not be a problem.
4265 	 */
4266 	bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
4267 	req.ra_flags = NDI_RA_ALLOC_PARTIAL_OK | NDI_RA_ALLOC_BOUNDED;
4268 	req.ra_boundbase = 0;
4269 	req.ra_len = PCICFG_4GIG_LIMIT; /* Get as big as possible */
4270 	req.ra_align_mask =
4271 	    PCICFG_MEMGRAN - 1; /* 1M alignment on memory space */
4272 
4273 	rval = ndi_ra_alloc(ddi_get_parent(new_child), &req,
4274 	    &pf_mem_answer, &pf_mem_alen,  NDI_RA_TYPE_PCI_PREFETCH_MEM,
4275 	    NDI_RA_PASS);
4276 
4277 	if (rval != NDI_SUCCESS) {
4278 		if (rval == NDI_RA_PARTIAL_REQ) {
4279 			/*EMPTY*/
4280 			DEBUG0("NDI_RA_PARTIAL_REQ returned\n");
4281 		} else {
4282 			DEBUG0(
4283 			    "Failed to allocate PF memory for bridge\n");
4284 			/* PF mem is an optional requirement so continue */
4285 		}
4286 	}
4287 
4288 	DEBUG3("Bridge PF Memory Allocated [0x%x.%x] len [0x%x]\n",
4289 	    PCICFG_HIADDR(pf_mem_answer),
4290 	    PCICFG_LOADDR(pf_mem_answer),
4291 	    pf_mem_alen);
4292 
4293 	/*
4294 	 * Put available PF memory into the pool.
4295 	 */
4296 	(void) ndi_ra_free(new_child, pf_mem_answer, pf_mem_alen,
4297 	    NDI_RA_TYPE_PCI_PREFETCH_MEM, NDI_RA_PASS);
4298 
4299 	pf_mem_base = pf_mem_answer;
4300 
4301 	/*
4302 	 * Program the PF memory base register with the
4303 	 * start of the memory range
4304 	 */
4305 	pci_config_put16(h, PCI_BCNF_PF_BASE_LOW,
4306 	    PCICFG_HIWORD(PCICFG_LOADDR(pf_mem_answer)));
4307 	pci_config_put32(h, PCI_BCNF_PF_BASE_HIGH,
4308 	    PCICFG_HIADDR(pf_mem_answer));
4309 
4310 	/*
4311 	 * Program the PF memory limit register with the
4312 	 * end of the memory range.
4313 	 */
4314 	pci_config_put16(h, PCI_BCNF_PF_LIMIT_LOW,
4315 	    PCICFG_HIWORD(PCICFG_LOADDR(
4316 	    PCICFG_ROUND_DOWN((pf_mem_answer + pf_mem_alen),
4317 	    PCICFG_MEMGRAN) - 1)));
4318 	pci_config_put32(h, PCI_BCNF_PF_LIMIT_HIGH,
4319 	    PCICFG_HIADDR(PCICFG_ROUND_DOWN((pf_mem_answer + pf_mem_alen),
4320 	    PCICFG_MEMGRAN) - 1));
4321 
4322 	/*
4323 	 * Allocate the chunk of PF memory (if any) not programmed into the
4324 	 * bridge because of the round down.
4325 	 */
4326 	if (PCICFG_ROUND_DOWN((pf_mem_answer + pf_mem_alen), PCICFG_MEMGRAN)
4327 	    != (pf_mem_answer + pf_mem_alen)) {
4328 		DEBUG0("Need to allocate Memory round off chunk\n");
4329 		bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
4330 		req.ra_flags = NDI_RA_ALLOC_SPECIFIED;
4331 		req.ra_addr = PCICFG_ROUND_DOWN((pf_mem_answer + pf_mem_alen),
4332 		    PCICFG_MEMGRAN);
4333 		req.ra_len =  (pf_mem_answer + pf_mem_alen) -
4334 		    (PCICFG_ROUND_DOWN((pf_mem_answer + pf_mem_alen),
4335 		    PCICFG_MEMGRAN));
4336 
4337 		(void) ndi_ra_alloc(new_child, &req,
4338 		    &round_answer, &round_len,  NDI_RA_TYPE_PCI_PREFETCH_MEM,
4339 		    NDI_RA_PASS);
4340 	}
4341 
4342 pf_setup_end:
4343 
4344 	/*
4345 	 * Program the memory base register with the
4346 	 * start of the memory range
4347 	 */
4348 	pci_config_put16(h, PCI_BCNF_MEM_BASE,
4349 	    PCICFG_HIWORD(PCICFG_LOADDR(mem_answer)));
4350 
4351 	/*
4352 	 * Program the memory limit register with the
4353 	 * end of the memory range.
4354 	 */
4355 
4356 	pci_config_put16(h, PCI_BCNF_MEM_LIMIT,
4357 	    PCICFG_HIWORD(PCICFG_LOADDR(
4358 	    PCICFG_ROUND_DOWN((mem_answer + mem_alen), PCICFG_MEMGRAN) - 1)));
4359 
4360 	/*
4361 	 * Allocate the chunk of memory (if any) not programmed into the
4362 	 * bridge because of the round down.
4363 	 */
4364 	if (PCICFG_ROUND_DOWN((mem_answer + mem_alen), PCICFG_MEMGRAN)
4365 	    != (mem_answer + mem_alen)) {
4366 		DEBUG0("Need to allocate Memory round off chunk\n");
4367 		bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
4368 		req.ra_flags = NDI_RA_ALLOC_SPECIFIED;
4369 		req.ra_addr = PCICFG_ROUND_DOWN((mem_answer + mem_alen),
4370 		    PCICFG_MEMGRAN);
4371 		req.ra_len =  (mem_answer + mem_alen) -
4372 		    (PCICFG_ROUND_DOWN((mem_answer + mem_alen),
4373 		    PCICFG_MEMGRAN));
4374 
4375 		(void) ndi_ra_alloc(new_child, &req,
4376 		    &round_answer, &round_len,  NDI_RA_TYPE_MEM, NDI_RA_PASS);
4377 	}
4378 
4379 	/*
4380 	 * Program the I/O Space Base
4381 	 */
4382 	pci_config_put8(h, PCI_BCNF_IO_BASE_LOW,
4383 	    PCICFG_HIBYTE(PCICFG_LOWORD(
4384 	    PCICFG_LOADDR(io_answer))));
4385 
4386 	pci_config_put16(h, PCI_BCNF_IO_BASE_HI,
4387 	    PCICFG_HIWORD(PCICFG_LOADDR(io_answer)));
4388 
4389 	/*
4390 	 * Program the I/O Space Limit
4391 	 */
4392 	pci_config_put8(h, PCI_BCNF_IO_LIMIT_LOW,
4393 	    PCICFG_HIBYTE(PCICFG_LOWORD(
4394 	    PCICFG_LOADDR(PCICFG_ROUND_DOWN(io_answer + io_alen,
4395 	    PCICFG_IOGRAN)))) - 1);
4396 
4397 	pci_config_put16(h, PCI_BCNF_IO_LIMIT_HI,
4398 	    PCICFG_HIWORD(PCICFG_LOADDR(
4399 	    PCICFG_ROUND_DOWN(io_answer + io_alen, PCICFG_IOGRAN)))
4400 	    - 1);
4401 
4402 	/*
4403 	 * Allocate the chunk of I/O (if any) not programmed into the
4404 	 * bridge because of the round down.
4405 	 */
4406 	if (PCICFG_ROUND_DOWN((io_answer + io_alen), PCICFG_IOGRAN)
4407 	    != (io_answer + io_alen)) {
4408 		DEBUG0("Need to allocate I/O round off chunk\n");
4409 		bzero((caddr_t)&req, sizeof (ndi_ra_request_t));
4410 		req.ra_flags = NDI_RA_ALLOC_SPECIFIED;
4411 		req.ra_addr = PCICFG_ROUND_DOWN((io_answer + io_alen),
4412 		    PCICFG_IOGRAN);
4413 		req.ra_len =  (io_answer + io_alen) -
4414 		    (PCICFG_ROUND_DOWN((io_answer + io_alen),
4415 		    PCICFG_IOGRAN));
4416 
4417 		(void) ndi_ra_alloc(new_child, &req,
4418 		    &round_answer, &round_len,  NDI_RA_TYPE_IO, NDI_RA_PASS);
4419 	}
4420 
4421 	(void) pcicfg_set_bus_numbers(h, bus, new_bus, max_bus);
4422 
4423 	/*
4424 	 * Setup "ranges" and "bus-range" properties before onlining
4425 	 * the bridge.
4426 	 */
4427 	bzero((caddr_t)range, sizeof (ppb_ranges_t) * PCICFG_RANGE_LEN);
4428 
4429 	range[0].child_high = range[0].parent_high |= (PCI_REG_REL_M |
4430 	    PCI_ADDR_IO);
4431 	range[0].child_low = range[0].parent_low = io_base;
4432 	range[1].child_high = range[1].parent_high |=
4433 	    (PCI_REG_REL_M | PCI_ADDR_MEM32);
4434 	range[1].child_low = range[1].parent_low = mem_base;
4435 	range[2].child_high = range[2].parent_high |=
4436 	    (PCI_REG_REL_M | PCI_ADDR_MEM64 | PCI_REG_PF_M);
4437 	range[2].child_low = range[2].parent_low = pf_mem_base;
4438 
4439 	range[0].size_low = io_alen;
4440 	(void) pcicfg_update_ranges_prop(new_child, &range[0]);
4441 	range[1].size_low = mem_alen;
4442 	(void) pcicfg_update_ranges_prop(new_child, &range[1]);
4443 	range[2].size_low = pf_mem_alen;
4444 	(void) pcicfg_update_ranges_prop(new_child, &range[2]);
4445 
4446 	bus_range[0] = new_bus;
4447 	bus_range[1] = max_bus;
4448 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, new_child,
4449 	    "bus-range", bus_range, 2);
4450 
4451 	/*
4452 	 * Reset the secondary bus
4453 	 */
4454 	pci_config_put16(h, PCI_BCNF_BCNTRL,
4455 	    pci_config_get16(h, PCI_BCNF_BCNTRL) | 0x40);
4456 
4457 	drv_usecwait(100);
4458 
4459 	pci_config_put16(h, PCI_BCNF_BCNTRL,
4460 	    pci_config_get16(h, PCI_BCNF_BCNTRL) & ~0x40);
4461 
4462 	/*
4463 	 * Clear status bits
4464 	 */
4465 	pci_config_put16(h, PCI_BCNF_SEC_STATUS, 0xffff);
4466 
4467 	/*
4468 	 * Needs to be set to this value
4469 	 */
4470 	pci_config_put8(h, PCI_CONF_ILINE, 0xf);
4471 
4472 	/* check our device_type as defined by Open Firmware */
4473 	if (pcicfg_pcie_device_type(new_child, h) == DDI_SUCCESS)
4474 		pcie_device_type = 1;
4475 
4476 	/*
4477 	 * Set bus properties
4478 	 */
4479 	if (pcicfg_set_busnode_props(new_child, pcie_device_type)
4480 	    != PCICFG_SUCCESS) {
4481 		DEBUG0("Failed to set busnode props\n");
4482 		rval = PCICFG_FAILURE;
4483 		goto cleanup;
4484 	}
4485 
4486 	(void) pcicfg_device_on(h);
4487 
4488 	if (is_pcie)
4489 		(void) pcie_init_bus(new_child, 0, PCIE_BUS_FINAL);
4490 	if (ndi_devi_online(new_child, NDI_NO_EVENT|NDI_CONFIG)
4491 	    != NDI_SUCCESS) {
4492 		DEBUG0("Unable to online bridge\n");
4493 		rval = PCICFG_FAILURE;
4494 		goto cleanup;
4495 	}
4496 
4497 	DEBUG0("Bridge is ONLINE\n");
4498 
4499 	/*
4500 	 * After a Reset, we need to wait 2^25 clock cycles before the
4501 	 * first Configuration access.  The worst case is 33MHz, which
4502 	 * is a 1 second wait.
4503 	 */
4504 	drv_usecwait(pcicfg_sec_reset_delay);
4505 
4506 	/*
4507 	 * Probe all children devices
4508 	 */
4509 	DEBUG0("Bridge Programming Complete - probe children\n");
4510 	ndi_devi_enter(new_child, &count);
4511 	for (i = 0; ((i < PCI_MAX_DEVICES) && (ari_mode == B_FALSE));
4512 	    i++) {
4513 		for (j = 0; j < max_function; ) {
4514 			if (ari_mode)
4515 				trans_device = j >> 3;
4516 			else
4517 				trans_device = i;
4518 
4519 			if ((rval = pcicfg_probe_children(new_child,
4520 			    new_bus, trans_device, j & 7, highest_bus,
4521 			    0, is_pcie)) != PCICFG_SUCCESS) {
4522 				if (rval == PCICFG_NODEVICE) {
4523 					DEBUG3("No Device at bus [0x%x]"
4524 					    "device [0x%x] "
4525 					    "func [0x%x]\n", new_bus,
4526 					    trans_device, j & 7);
4527 
4528 					if (j)
4529 						goto next;
4530 				} else
4531 					/*EMPTY*/
4532 					DEBUG3("Failed to configure bus "
4533 					    "[0x%x] device [0x%x] "
4534 					    "func [0x%x]\n", new_bus,
4535 					    trans_device, j & 7);
4536 				break;
4537 			}
4538 next:
4539 			new_device = pcicfg_devi_find(new_child, trans_device,
4540 			    (j & 7));
4541 
4542 			/*
4543 			 * Determine if ARI Forwarding should be enabled.
4544 			 */
4545 			if (j == 0) {
4546 				if (new_device == NULL)
4547 					break;
4548 
4549 				if ((pcie_ari_supported(new_child) ==
4550 				    PCIE_ARI_FORW_SUPPORTED) &&
4551 				    (pcie_ari_device(new_device) ==
4552 				    PCIE_ARI_DEVICE)) {
4553 					if (pcie_ari_enable(new_child) ==
4554 					    DDI_SUCCESS) {
4555 						(void) ddi_prop_create(
4556 						    DDI_DEV_T_NONE,
4557 						    new_child,
4558 						    DDI_PROP_CANSLEEP,
4559 						    "ari-enabled", NULL, 0);
4560 						ari_mode = B_TRUE;
4561 						max_function =
4562 						    PCICFG_MAX_ARI_FUNCTION;
4563 					}
4564 				}
4565 			}
4566 			if (ari_mode == B_TRUE) {
4567 				int next_function;
4568 
4569 				if (new_device == NULL)
4570 					break;
4571 
4572 				if (pcie_ari_get_next_function(new_device,
4573 				    &next_function) != DDI_SUCCESS)
4574 					break;
4575 
4576 				j = next_function;
4577 
4578 				if (next_function == 0)
4579 					break;
4580 			} else
4581 				j++;
4582 
4583 		}
4584 		/* if any function fails to be configured, no need to proceed */
4585 		if (rval != PCICFG_NODEVICE)
4586 			break;
4587 	}
4588 	ndi_devi_exit(new_child, count);
4589 
4590 	/*
4591 	 * Offline the bridge to allow reprogramming of resources.
4592 	 *
4593 	 * This should always succeed since nobody else has started to
4594 	 * use it yet, failing to detach the driver would indicate a bug.
4595 	 * Also in that case it's better just panic than allowing the
4596 	 * configurator to proceed with BAR reprogramming without bridge
4597 	 * driver detached.
4598 	 */
4599 	VERIFY(ndi_devi_offline(new_child, NDI_NO_EVENT|NDI_UNCONFIG)
4600 	    == NDI_SUCCESS);
4601 	if (is_pcie)
4602 		pcie_fini_bus(new_child, PCIE_BUS_INITIAL);
4603 
4604 	phdl.dip = new_child;
4605 	phdl.memory_base = mem_answer;
4606 	phdl.io_base = io_answer;
4607 	phdl.pf_memory_base = pf_mem_answer;
4608 	phdl.error = PCICFG_SUCCESS;	/* in case of empty child tree */
4609 
4610 	ndi_devi_enter(ddi_get_parent(new_child), &count);
4611 	ddi_walk_devs(new_child, pcicfg_find_resource_end, (void *)&phdl);
4612 	ndi_devi_exit(ddi_get_parent(new_child), count);
4613 
4614 	num_slots = pcicfg_get_nslots(new_child, h);
4615 	mem_end = PCICFG_ROUND_UP(phdl.memory_base, PCICFG_MEMGRAN);
4616 	io_end = PCICFG_ROUND_UP(phdl.io_base, PCICFG_IOGRAN);
4617 	pf_mem_end = PCICFG_ROUND_UP(phdl.pf_memory_base, PCICFG_MEMGRAN);
4618 
4619 	DEBUG4("Start of Unallocated Bridge(%d slots) Resources Mem=0x%lx "
4620 	    "I/O=0x%lx PF_mem=%x%lx\n", num_slots, mem_end, io_end, pf_mem_end);
4621 
4622 	/*
4623 	 * Before probing the children we've allocated maximum MEM/IO
4624 	 * resources from parent, and updated "available" property
4625 	 * accordingly. Later we'll be giving up unused resources to
4626 	 * the parent, thus we need to destroy "available" property
4627 	 * here otherwise it will be out-of-sync with the actual free
4628 	 * resources this bridge has. This property will be rebuilt below
4629 	 * with the actual free resources reserved for hotplug slots
4630 	 * (if any).
4631 	 */
4632 	(void) ndi_prop_remove(DDI_DEV_T_NONE, new_child, "available");
4633 	/*
4634 	 * if the bridge a slots, then preallocate. If not, assume static
4635 	 * configuration. Also check for preallocation limits and spit
4636 	 * warning messages appropriately (perhaps some can be in debug mode).
4637 	 */
4638 	if (num_slots) {
4639 		uint64_t mem_reqd = mem_answer +
4640 		    (num_slots * pcicfg_slot_memsize);
4641 		uint64_t io_reqd = io_answer +
4642 		    (num_slots * pcicfg_slot_iosize);
4643 		uint64_t pf_mem_reqd = pf_mem_answer +
4644 		    (num_slots * pcicfg_slot_pf_memsize);
4645 		uint8_t highest_bus_reqd = new_bus +
4646 		    (num_slots * pcicfg_slot_busnums);
4647 #ifdef DEBUG
4648 		if (mem_end > mem_reqd)
4649 			DEBUG3("Memory space consumed by bridge more "
4650 			    "than planned for %d slot(s)(%" PRIx64 ",%"
4651 			    PRIx64 ")", num_slots, mem_answer, mem_end);
4652 		if (io_end > io_reqd)
4653 			DEBUG3("IO space consumed by bridge more than"
4654 			    " planned for %d slot(s)(%" PRIx64 ",%" PRIx64 ")",
4655 			    num_slots, io_answer, io_end);
4656 		if (pf_mem_end > pf_mem_reqd)
4657 			DEBUG3("PF Memory space consumed by bridge"
4658 			    " more than planned for %d slot(s)(%" PRIx64 ",%"
4659 			    PRIx64 ")", num_slots, pf_mem_answer, pf_mem_end);
4660 		if (*highest_bus > highest_bus_reqd)
4661 			DEBUG3("Buses consumed by bridge more "
4662 			    "than planned for %d slot(s)(%x, %x)",
4663 			    num_slots, new_bus, *highest_bus);
4664 
4665 		if (mem_reqd > (mem_answer + mem_alen))
4666 			DEBUG3("Memory space required by bridge more "
4667 			    "than available for %d slot(s)(%" PRIx64 ",%"
4668 			    PRIx64 ")", num_slots, mem_answer, mem_end);
4669 		if (io_reqd > (io_answer + io_alen))
4670 			DEBUG3("IO space required by bridge more than"
4671 			    "available for %d slot(s)(%" PRIx64 ",%" PRIx64 ")",
4672 			    num_slots, io_answer, io_end);
4673 		if (pf_mem_reqd > (pf_mem_answer + pf_mem_alen))
4674 			DEBUG3("PF Memory space required by bridge"
4675 			    " more than available for %d slot(s)(%" PRIx64 ",%"
4676 			    PRIx64 ")", num_slots, pf_mem_answer, pf_mem_end);
4677 		if (highest_bus_reqd > max_bus)
4678 			DEBUG3("Bus numbers required by bridge more "
4679 			    "than available for %d slot(s)(%x, %x)",
4680 			    num_slots, new_bus, *highest_bus);
4681 #endif
4682 		mem_end = MAX((MIN(mem_reqd, (mem_answer + mem_alen))),
4683 		    mem_end);
4684 		io_end = MAX((MIN(io_reqd, (io_answer + io_alen))), io_end);
4685 		pf_mem_end = MAX((MIN(pf_mem_reqd, (pf_mem_answer +
4686 		    pf_mem_alen))), pf_mem_end);
4687 		*highest_bus = MAX((MIN(highest_bus_reqd, max_bus)),
4688 		    *highest_bus);
4689 		DEBUG4("mem_end %lx, io_end %lx, pf_mem_end %lx"
4690 		    " highest_bus %x\n", mem_end, io_end, pf_mem_end,
4691 		    *highest_bus);
4692 	}
4693 
4694 	/*
4695 	 * Give back unused memory space to parent.
4696 	 */
4697 	(void) ndi_ra_free(ddi_get_parent(new_child), mem_end,
4698 	    (mem_answer + mem_alen) - mem_end, NDI_RA_TYPE_MEM, NDI_RA_PASS);
4699 
4700 	if (mem_end == mem_answer) {
4701 		DEBUG0("No memory resources used\n");
4702 		/*
4703 		 * To prevent the bridge from forwarding any Memory
4704 		 * transactions, the Memory Limit will be programmed
4705 		 * with a smaller value than the Memory Base.
4706 		 */
4707 		pci_config_put16(h, PCI_BCNF_MEM_BASE, 0xffff);
4708 		pci_config_put16(h, PCI_BCNF_MEM_LIMIT, 0);
4709 
4710 		mem_size = 0;
4711 	} else {
4712 		/*
4713 		 * Reprogram the end of the memory.
4714 		 */
4715 		pci_config_put16(h, PCI_BCNF_MEM_LIMIT,
4716 		    PCICFG_HIWORD(mem_end) - 1);
4717 		mem_size = mem_end - mem_base;
4718 	}
4719 
4720 	/*
4721 	 * Give back unused io space to parent.
4722 	 */
4723 	(void) ndi_ra_free(ddi_get_parent(new_child),
4724 	    io_end, (io_answer + io_alen) - io_end,
4725 	    NDI_RA_TYPE_IO, NDI_RA_PASS);
4726 
4727 	if (io_end == io_answer) {
4728 		DEBUG0("No IO Space resources used\n");
4729 
4730 		/*
4731 		 * To prevent the bridge from forwarding any I/O
4732 		 * transactions, the I/O Limit will be programmed
4733 		 * with a smaller value than the I/O Base.
4734 		 */
4735 		pci_config_put8(h, PCI_BCNF_IO_LIMIT_LOW, 0);
4736 		pci_config_put16(h, PCI_BCNF_IO_LIMIT_HI, 0);
4737 		pci_config_put8(h, PCI_BCNF_IO_BASE_LOW, 0xff);
4738 		pci_config_put16(h, PCI_BCNF_IO_BASE_HI, 0);
4739 
4740 		io_size = 0;
4741 	} else {
4742 		/*
4743 		 * Reprogram the end of the io space.
4744 		 */
4745 		pci_config_put8(h, PCI_BCNF_IO_LIMIT_LOW,
4746 		    PCICFG_HIBYTE(PCICFG_LOWORD(
4747 		    PCICFG_LOADDR(io_end) - 1)));
4748 
4749 		pci_config_put16(h, PCI_BCNF_IO_LIMIT_HI,
4750 		    PCICFG_HIWORD(PCICFG_LOADDR(io_end - 1)));
4751 
4752 		io_size = io_end - io_base;
4753 	}
4754 
4755 	/*
4756 	 * Give back unused PF memory space to parent.
4757 	 */
4758 	if (pf_mem_supported) {
4759 		(void) ndi_ra_free(ddi_get_parent(new_child),
4760 		    pf_mem_end, (pf_mem_answer + pf_mem_alen) - pf_mem_end,
4761 		    NDI_RA_TYPE_PCI_PREFETCH_MEM, NDI_RA_PASS);
4762 
4763 		if (pf_mem_end == pf_mem_answer) {
4764 			DEBUG0("No PF memory resources used\n");
4765 			/*
4766 			 * To prevent the bridge from forwarding any PF Memory
4767 			 * transactions, the PF Memory Limit will be programmed
4768 			 * with a smaller value than the Memory Base.
4769 			 */
4770 			pci_config_put16(h, PCI_BCNF_PF_BASE_LOW, 0xfff0);
4771 			pci_config_put32(h, PCI_BCNF_PF_BASE_HIGH, 0xffffffff);
4772 			pci_config_put16(h, PCI_BCNF_PF_LIMIT_LOW, 0);
4773 			pci_config_put32(h, PCI_BCNF_PF_LIMIT_HIGH, 0);
4774 
4775 			pf_mem_size = 0;
4776 		} else {
4777 			/*
4778 			 * Reprogram the end of the PF memory range.
4779 			 */
4780 			pci_config_put16(h, PCI_BCNF_PF_LIMIT_LOW,
4781 			    PCICFG_HIWORD(PCICFG_LOADDR(pf_mem_end - 1)));
4782 			pci_config_put32(h, PCI_BCNF_PF_LIMIT_HIGH,
4783 			    PCICFG_HIADDR(pf_mem_end - 1));
4784 			pf_mem_size = pf_mem_end - pf_mem_base;
4785 		}
4786 	}
4787 
4788 	if ((max_bus - *highest_bus) > 0) {
4789 		/*
4790 		 * Give back unused bus numbers
4791 		 */
4792 		(void) ndi_ra_free(ddi_get_parent(new_child),
4793 		    *highest_bus+1, max_bus - *highest_bus,
4794 		    NDI_RA_TYPE_PCI_BUSNUM, NDI_RA_PASS);
4795 	}
4796 
4797 	/*
4798 	 * Set bus numbers to ranges encountered during scan
4799 	 */
4800 	(void) pcicfg_set_bus_numbers(h, bus, new_bus, *highest_bus);
4801 
4802 	/*
4803 	 * Remove the ranges property if it exists since we will create
4804 	 * a new one.
4805 	 */
4806 	(void) ndi_prop_remove(DDI_DEV_T_NONE, new_child, "ranges");
4807 
4808 	DEBUG2("Creating Ranges property - Mem Address %lx Mem Size %x\n",
4809 	    mem_base, mem_size);
4810 	DEBUG2("                         - I/O Address %lx I/O Size %x\n",
4811 	    io_base, io_size);
4812 	DEBUG2("                         - PF Mem address %lx PF Mem Size %x\n",
4813 	    pf_mem_base, pf_mem_size);
4814 
4815 	bzero((caddr_t)range, sizeof (ppb_ranges_t) * PCICFG_RANGE_LEN);
4816 
4817 	range[0].child_high = range[0].parent_high |= (PCI_REG_REL_M |
4818 	    PCI_ADDR_IO);
4819 	range[0].child_low = range[0].parent_low = io_base;
4820 	range[1].child_high = range[1].parent_high |=
4821 	    (PCI_REG_REL_M | PCI_ADDR_MEM32);
4822 	range[1].child_low = range[1].parent_low = mem_base;
4823 	range[2].child_high = range[2].parent_high |=
4824 	    (PCI_REG_REL_M | PCI_ADDR_MEM64 | PCI_REG_PF_M);
4825 	range[2].child_low = range[2].parent_low = pf_mem_base;
4826 
4827 	if (io_size > 0) {
4828 		range[0].size_low = io_size;
4829 		(void) pcicfg_update_ranges_prop(new_child, &range[0]);
4830 	}
4831 	if (mem_size > 0) {
4832 		range[1].size_low = mem_size;
4833 		(void) pcicfg_update_ranges_prop(new_child, &range[1]);
4834 	}
4835 	if (pf_mem_size > 0) {
4836 		range[2].size_low = pf_mem_size;
4837 		(void) pcicfg_update_ranges_prop(new_child, &range[2]);
4838 	}
4839 
4840 	bus_range[0] = pci_config_get8(h, PCI_BCNF_SECBUS);
4841 	bus_range[1] = pci_config_get8(h, PCI_BCNF_SUBBUS);
4842 	DEBUG1("End of bridge probe: bus_range[0] =  %d\n", bus_range[0]);
4843 	DEBUG1("End of bridge probe: bus_range[1] =  %d\n", bus_range[1]);
4844 
4845 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, new_child,
4846 	    "bus-range", bus_range, 2);
4847 
4848 	rval = PCICFG_SUCCESS;
4849 
4850 	PCICFG_DUMP_BRIDGE_CONFIG(h);
4851 
4852 cleanup:
4853 	/* free up resources (for error return case only) */
4854 	if (rval != PCICFG_SUCCESS) {
4855 		if (mem_alen)
4856 			(void) ndi_ra_free(ddi_get_parent(new_child), mem_base,
4857 			    mem_alen, NDI_RA_TYPE_MEM, NDI_RA_PASS);
4858 		if (io_alen)
4859 			(void) ndi_ra_free(ddi_get_parent(new_child), io_base,
4860 			    io_alen, NDI_RA_TYPE_IO, NDI_RA_PASS);
4861 		if (pf_mem_alen)
4862 			(void) ndi_ra_free(ddi_get_parent(new_child),
4863 			    pf_mem_base, pf_mem_alen,
4864 			    NDI_RA_TYPE_PCI_PREFETCH_MEM, NDI_RA_PASS);
4865 		if (pcibus_alen)
4866 			(void) ndi_ra_free(ddi_get_parent(new_child),
4867 			    pcibus_base, pcibus_alen, NDI_RA_TYPE_PCI_BUSNUM,
4868 			    NDI_RA_PASS);
4869 	}
4870 
4871 	/* free up any resource maps setup for the bridge node */
4872 	(void) ndi_ra_map_destroy(new_child, NDI_RA_TYPE_PCI_BUSNUM);
4873 	(void) ndi_ra_map_destroy(new_child, NDI_RA_TYPE_IO);
4874 	(void) ndi_ra_map_destroy(new_child, NDI_RA_TYPE_MEM);
4875 	(void) ndi_ra_map_destroy(new_child, NDI_RA_TYPE_PCI_PREFETCH_MEM);
4876 
4877 	return (rval);
4878 }
4879 
4880 static int
4881 pcicfg_find_resource_end(dev_info_t *dip, void *hdl)
4882 {
4883 	pcicfg_phdl_t *entry = (pcicfg_phdl_t *)hdl;
4884 	pci_regspec_t *pci_ap;
4885 	int length;
4886 	int rcount;
4887 	int i;
4888 
4889 	entry->error = PCICFG_SUCCESS;
4890 
4891 	if (dip == entry->dip) {
4892 		DEBUG0("Don't include parent bridge node\n");
4893 		return (DDI_WALK_CONTINUE);
4894 	} else {
4895 		if (ddi_getlongprop(DDI_DEV_T_ANY, dip,
4896 		    DDI_PROP_DONTPASS, "assigned-addresses",
4897 		    (caddr_t)&pci_ap,  &length) != DDI_PROP_SUCCESS) {
4898 			DEBUG0("Node doesn't have assigned-addresses\n");
4899 			return (DDI_WALK_CONTINUE);
4900 		}
4901 
4902 		rcount = length / sizeof (pci_regspec_t);
4903 
4904 		for (i = 0; i < rcount; i++) {
4905 
4906 			switch (PCI_REG_ADDR_G(pci_ap[i].pci_phys_hi)) {
4907 
4908 			case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
4909 				if (pci_ap[i].pci_phys_hi & PCI_REG_PF_M) {
4910 					if ((pci_ap[i].pci_phys_low +
4911 					    pci_ap[i].pci_size_low) >
4912 					    entry->pf_memory_base) {
4913 						entry->pf_memory_base =
4914 						    pci_ap[i].pci_phys_low +
4915 						    pci_ap[i].pci_size_low;
4916 					}
4917 				} else {
4918 					if ((pci_ap[i].pci_phys_low +
4919 					    pci_ap[i].pci_size_low) >
4920 					    entry->memory_base) {
4921 						entry->memory_base =
4922 						    pci_ap[i].pci_phys_low +
4923 						    pci_ap[i].pci_size_low;
4924 					}
4925 				}
4926 				break;
4927 			case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
4928 				if (pci_ap[i].pci_phys_hi & PCI_REG_PF_M) {
4929 					if ((PCICFG_LADDR(
4930 					    pci_ap[i].pci_phys_low,
4931 					    pci_ap[i].pci_phys_mid) +
4932 					    pci_ap[i].pci_size_low) >
4933 					    entry->pf_memory_base) {
4934 						entry->pf_memory_base =
4935 						    PCICFG_LADDR(
4936 						    pci_ap[i].pci_phys_low,
4937 						    pci_ap[i].pci_phys_mid) +
4938 						    pci_ap[i].pci_size_low;
4939 					}
4940 				} else {
4941 					if ((PCICFG_LADDR(
4942 					    pci_ap[i].pci_phys_low,
4943 					    pci_ap[i].pci_phys_mid) +
4944 					    pci_ap[i].pci_size_low) >
4945 					    entry->memory_base) {
4946 						entry->memory_base =
4947 						    PCICFG_LADDR(
4948 						    pci_ap[i].pci_phys_low,
4949 						    pci_ap[i].pci_phys_mid) +
4950 						    pci_ap[i].pci_size_low;
4951 					}
4952 				}
4953 				break;
4954 			case PCI_REG_ADDR_G(PCI_ADDR_IO):
4955 				if ((pci_ap[i].pci_phys_low +
4956 				    pci_ap[i].pci_size_low) >
4957 				    entry->io_base) {
4958 					entry->io_base =
4959 					    pci_ap[i].pci_phys_low +
4960 					    pci_ap[i].pci_size_low;
4961 				}
4962 				break;
4963 			}
4964 		}
4965 
4966 		/*
4967 		 * free the memory allocated by ddi_getlongprop
4968 		 */
4969 		kmem_free(pci_ap, length);
4970 
4971 		/*
4972 		 * continue the walk to the next sibling to sum memory
4973 		 */
4974 		return (DDI_WALK_CONTINUE);
4975 	}
4976 }
4977 
4978 /*
4979  * Make "parent" be the parent of the "child" dip
4980  */
4981 static void
4982 pcicfg_reparent_node(dev_info_t *child, dev_info_t *parent)
4983 {
4984 	int circ;
4985 	dev_info_t *opdip;
4986 
4987 	ASSERT(i_ddi_node_state(child) <= DS_LINKED);
4988 	/*
4989 	 * Unlink node from tree before reparenting
4990 	 */
4991 	opdip = ddi_get_parent(child);
4992 	ndi_devi_enter(opdip, &circ);
4993 	(void) i_ndi_unconfig_node(child, DS_PROTO, 0);
4994 	ndi_devi_exit(opdip, circ);
4995 
4996 	DEVI(child)->devi_parent = DEVI(parent);
4997 	DEVI(child)->devi_bus_ctl = DEVI(parent);
4998 	(void) ndi_devi_bind_driver(child, 0);
4999 }
5000 
5001 /*
5002  * Return PCICFG_SUCCESS if device exists at the specified address.
5003  * Return PCICFG_NODEVICE is no device exists at the specified address.
5004  */
5005 int
5006 pcicfg_config_setup(dev_info_t *dip, ddi_acc_handle_t *handle)
5007 {
5008 	caddr_t	cfgaddr;
5009 	ddi_device_acc_attr_t attr;
5010 	dev_info_t *anode;
5011 	int status;
5012 	int		rlen;
5013 	pci_regspec_t	*reg;
5014 	int		ret = DDI_SUCCESS;
5015 	int16_t		tmp;
5016 
5017 	/*
5018 	 * Get the pci register spec from the node
5019 	 */
5020 	status = ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "reg",
5021 	    (caddr_t)&reg, &rlen);
5022 
5023 	switch (status) {
5024 		case DDI_PROP_SUCCESS:
5025 			break;
5026 		case DDI_PROP_NO_MEMORY:
5027 			DEBUG0("reg present, but unable to get memory\n");
5028 			return (PCICFG_FAILURE);
5029 		default:
5030 			DEBUG0("no reg property\n");
5031 			return (PCICFG_FAILURE);
5032 	}
5033 
5034 	anode = dip;
5035 	DEBUG2("conf_map: dip=%p, anode=%p\n", dip, anode);
5036 
5037 	attr.devacc_attr_version = DDI_DEVICE_ATTR_V0;
5038 	attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC;
5039 	attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC;
5040 
5041 	if (ddi_regs_map_setup(anode, 0, &cfgaddr, 0, 0, &attr, handle)
5042 	    != DDI_SUCCESS) {
5043 		DEBUG0("Failed to setup registers\n");
5044 		kmem_free((caddr_t)reg, rlen);
5045 		return (PCICFG_FAILURE);
5046 	}
5047 
5048 	/*
5049 	 * need to use DDI interfaces as the conf space is
5050 	 * cannot be directly accessed by the host.
5051 	 */
5052 	tmp = (int16_t)ddi_get16(*handle, (uint16_t *)cfgaddr);
5053 	if ((tmp == (int16_t)0xffff) || (tmp == -1)) {
5054 		DEBUG1("NO DEVICEFOUND, read %x\n", tmp);
5055 		ret = PCICFG_NODEVICE;
5056 	} else {
5057 		if (tmp == 0) {
5058 			DEBUG0("Device Not Ready yet ?");
5059 			ret = PCICFG_NODEVICE;
5060 		} else {
5061 			DEBUG1("DEVICEFOUND, read %x\n", tmp);
5062 			ret = PCICFG_SUCCESS;
5063 		}
5064 	}
5065 
5066 	if (ret == PCICFG_NODEVICE)
5067 		ddi_regs_map_free(handle);
5068 	kmem_free((caddr_t)reg, rlen);
5069 
5070 	return (ret);
5071 
5072 }
5073 
5074 static void
5075 pcicfg_config_teardown(ddi_acc_handle_t *handle)
5076 {
5077 	(void) ddi_regs_map_free(handle);
5078 }
5079 
5080 static int
5081 pcicfg_add_config_reg(dev_info_t *dip,
5082 	uint_t bus, uint_t device, uint_t func)
5083 {
5084 	int reg[10] = { PCI_ADDR_CONFIG, 0, 0, 0, 0};
5085 
5086 	reg[0] = PCICFG_MAKE_REG_HIGH(bus, device, func, 0);
5087 
5088 	return (ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "reg", reg, 5));
5089 }
5090 
5091 static int
5092 pcicfg_ari_configure(dev_info_t *dip)
5093 {
5094 	if (pcie_ari_supported(dip) == PCIE_ARI_FORW_NOT_SUPPORTED)
5095 		return (DDI_FAILURE);
5096 
5097 	/*
5098 	 * Until we have resource balancing, dynamically configure
5099 	 * ARI functions without firmware assistamce.
5100 	 */
5101 	return (DDI_FAILURE);
5102 }
5103 
5104 
5105 #ifdef DEBUG
5106 static void
5107 debug(char *fmt, uintptr_t a1, uintptr_t a2, uintptr_t a3,
5108 	uintptr_t a4, uintptr_t a5)
5109 {
5110 	if (pcicfg_debug > 1) {
5111 		prom_printf("pcicfg: ");
5112 		prom_printf(fmt, a1, a2, a3, a4, a5);
5113 	}
5114 }
5115 #endif
5116 
5117 /*ARGSUSED*/
5118 static uint8_t
5119 pcicfg_get_nslots(dev_info_t *dip, ddi_acc_handle_t handle)
5120 {
5121 	uint16_t cap_id_loc, slot_id_loc;
5122 	uint8_t num_slots = 0;
5123 
5124 	/* just depend on the pcie_cap for now. */
5125 	(void) PCI_CAP_LOCATE(handle, PCI_CAP_ID_PCI_E, &cap_id_loc);
5126 	(void) PCI_CAP_LOCATE(handle, PCI_CAP_ID_SLOT_ID, &slot_id_loc);
5127 	if (cap_id_loc != PCI_CAP_NEXT_PTR_NULL) {
5128 		if (pci_config_get8(handle, cap_id_loc + PCI_CAP_ID_REGS_OFF) &
5129 		    PCIE_PCIECAP_SLOT_IMPL)
5130 			num_slots = 1;
5131 	} else /* not a PCIe switch/bridge. Must be a PCI-PCI[-X] bridge */
5132 	if (slot_id_loc != PCI_CAP_NEXT_PTR_NULL) {
5133 		uint8_t esr_reg = pci_config_get8(handle, slot_id_loc + 2);
5134 		num_slots = PCI_CAPSLOT_NSLOTS(esr_reg);
5135 	}
5136 	/* XXX - need to cover PCI-PCIe bridge with n slots */
5137 	return (num_slots);
5138 }
5139 
5140 /*ARGSUSED*/
5141 static int
5142 pcicfg_pcie_dev(dev_info_t *dip, ddi_acc_handle_t handle)
5143 {
5144 	/* get parent device's device_type property */
5145 	char *device_type;
5146 	int val;
5147 	dev_info_t *pdip = ddi_get_parent(dip);
5148 
5149 	if (ddi_prop_lookup_string(DDI_DEV_T_ANY, pdip, DDI_PROP_DONTPASS,
5150 	    "device_type", &device_type) != DDI_PROP_SUCCESS) {
5151 		DEBUG2("device_type property missing for %s#%d",
5152 		    ddi_get_name(pdip), ddi_get_instance(pdip));
5153 		return (DDI_FAILURE);
5154 	}
5155 	DEBUG1("device_type=<%s>\n", device_type);
5156 
5157 	val = DDI_FAILURE;
5158 	if (strcmp(device_type, "pciex") == 0)
5159 		val = DDI_SUCCESS;
5160 	ddi_prop_free(device_type);
5161 	return (val);
5162 }
5163 
5164 static int
5165 pcicfg_pcie_device_type(dev_info_t *dip, ddi_acc_handle_t handle)
5166 {
5167 	int port_type = pcicfg_pcie_port_type(dip, handle);
5168 
5169 	DEBUG1("device port_type = %x\n", port_type);
5170 	/* No PCIe CAP regs, we are not PCIe device_type */
5171 	if (port_type < 0)
5172 		return (DDI_FAILURE);
5173 
5174 	/* check for all PCIe device_types */
5175 	if ((port_type == PCIE_PCIECAP_DEV_TYPE_UP) ||
5176 	    (port_type == PCIE_PCIECAP_DEV_TYPE_DOWN) ||
5177 	    (port_type == PCIE_PCIECAP_DEV_TYPE_ROOT) ||
5178 	    (port_type == PCIE_PCIECAP_DEV_TYPE_PCI2PCIE))
5179 		return (DDI_SUCCESS);
5180 
5181 	return (DDI_FAILURE);
5182 
5183 }
5184 
5185 /*ARGSUSED*/
5186 static int
5187 pcicfg_pcie_port_type(dev_info_t *dip, ddi_acc_handle_t handle)
5188 {
5189 	int port_type = -1;
5190 	uint16_t cap_loc;
5191 
5192 	/* Note: need to look at the port type information here */
5193 	(void) PCI_CAP_LOCATE(handle, PCI_CAP_ID_PCI_E, &cap_loc);
5194 	if (cap_loc != PCI_CAP_NEXT_PTR_NULL)
5195 		port_type = pci_config_get16(handle,
5196 		    cap_loc + PCIE_PCIECAP) & PCIE_PCIECAP_DEV_TYPE_MASK;
5197 
5198 	return (port_type);
5199 }
5200 
5201 /*
5202  * Return true if the devinfo node is in a PCI Express hierarchy.
5203  */
5204 static boolean_t
5205 is_pcie_fabric(dev_info_t *dip)
5206 {
5207 	dev_info_t *root = ddi_root_node();
5208 	dev_info_t *pdip;
5209 	boolean_t found = B_FALSE;
5210 	char *bus;
5211 
5212 	/*
5213 	 * Does this device reside in a pcie fabric ?
5214 	 */
5215 	for (pdip = dip; pdip && (pdip != root) && !found;
5216 	    pdip = ddi_get_parent(pdip)) {
5217 		if (ddi_prop_lookup_string(DDI_DEV_T_ANY, pdip,
5218 		    DDI_PROP_DONTPASS, "device_type", &bus) !=
5219 		    DDI_PROP_SUCCESS)
5220 			break;
5221 
5222 		if (strcmp(bus, "pciex") == 0)
5223 			found = B_TRUE;
5224 
5225 		ddi_prop_free(bus);
5226 	}
5227 
5228 	return (found);
5229 }
5230