xref: /illumos-gate/usr/src/uts/i86pc/os/mlsetup.c (revision 4de2612967d06c4fdbf524a62556a1e8118a006f)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License, Version 1.0 only
6  * (the "License").  You may not use this file except in compliance
7  * with the License.
8  *
9  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10  * or http://www.opensolaris.org/os/licensing.
11  * See the License for the specific language governing permissions
12  * and limitations under the License.
13  *
14  * When distributing Covered Code, include this CDDL HEADER in each
15  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16  * If applicable, add the following below this CDDL HEADER, with the
17  * fields enclosed by brackets "[]" replaced with your own identifying
18  * information: Portions Copyright [yyyy] [name of copyright owner]
19  *
20  * CDDL HEADER END
21  */
22 /*
23  * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #pragma ident	"%Z%%M%	%I%	%E% SMI"
28 
29 #include <sys/types.h>
30 #include <sys/disp.h>
31 #include <sys/promif.h>
32 #include <sys/clock.h>
33 #include <sys/cpuvar.h>
34 #include <sys/stack.h>
35 #include <vm/as.h>
36 #include <vm/hat.h>
37 #include <sys/reboot.h>
38 #include <sys/avintr.h>
39 #include <sys/vtrace.h>
40 #include <sys/proc.h>
41 #include <sys/thread.h>
42 #include <sys/cpupart.h>
43 #include <sys/pset.h>
44 #include <sys/copyops.h>
45 #include <sys/chip.h>
46 #include <sys/disp.h>
47 #include <sys/debug.h>
48 #include <sys/sunddi.h>
49 #include <sys/x86_archext.h>
50 #include <sys/privregs.h>
51 #include <sys/machsystm.h>
52 #include <sys/ontrap.h>
53 #include <sys/bootconf.h>
54 #include <sys/kdi.h>
55 #include <sys/archsystm.h>
56 #include <sys/promif.h>
57 #include <sys/bootconf.h>
58 #include <sys/kobj.h>
59 #include <sys/kobj_lex.h>
60 #include <sys/pci_cfgspace.h>
61 #if defined(__amd64)
62 #include <sys/bootsvcs.h>
63 
64 /*
65  * XX64	This stuff deals with switching stacks in case a trapping
66  *	thread wants to call back into boot -after- boot has lost track
67  *	of the mappings but before the kernel owns the console.
68  *
69  *	(A better way to hide this would be to add a 'this' pointer to
70  *	every boot syscall so that vmx could get at the resulting save
71  *	area.)
72  */
73 
74 struct boot_syscalls *_vmx_sysp;
75 static struct boot_syscalls __kbootsvcs;
76 extern struct boot_syscalls *sysp;
77 extern void _stack_safe_putchar(int c);
78 #endif
79 
80 /*
81  * some globals for patching the result of cpuid
82  * to solve problems w/ creative cpu vendors
83  */
84 
85 extern uint32_t cpuid_feature_ecx_include;
86 extern uint32_t cpuid_feature_ecx_exclude;
87 extern uint32_t cpuid_feature_edx_include;
88 extern uint32_t cpuid_feature_edx_exclude;
89 
90 /*
91  * Dummy spl priority masks
92  */
93 static unsigned char	dummy_cpu_pri[MAXIPL + 1] = {
94 	0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
95 	0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf
96 };
97 
98 /*
99  * External Routines:
100  */
101 
102 extern void init_tables(void);
103 
104 
105 static uint32_t
106 cpuid_getval(char *name)
107 {
108 	char prop[32];
109 	u_longlong_t ll;
110 	extern struct bootops *bootops;
111 	if ((BOP_GETPROPLEN(bootops, name) > sizeof (prop)) ||
112 	    (BOP_GETPROP(bootops, name, prop) < 0) ||
113 	    (kobj_getvalue(prop, &ll) == -1))
114 		return (0);
115 	return ((uint32_t)ll);
116 }
117 
118 /*
119  * Setup routine called right before main(). Interposing this function
120  * before main() allows us to call it in a machine-independent fashion.
121  */
122 void
123 mlsetup(struct regs *rp)
124 {
125 	extern struct classfuncs sys_classfuncs;
126 	extern struct chip cpu0_chip;
127 	extern disp_t cpu0_disp;
128 	extern char t0stack[];
129 
130 	ASSERT_STACK_ALIGNED();
131 
132 #if defined(__amd64)
133 
134 #if (BS_VERSION > 4)
135 	/*
136 	 * When new boot_syscalls are added to the vector, this routine
137 	 * must be modified to copy them into the kernel's copy of the
138 	 * vector.
139 	 */
140 #error mlsetup() must be updated for amd64 to support new boot_syscalls
141 #endif	/* (BS_VERSION > 4) */
142 
143 	/*
144 	 * XX64	This remaps vmx's putchar to use the kernel's version
145 	 *	that switches stacks before diving into vmx
146 	 *	See explanation/complaints in commentary above.
147 	 */
148 	_vmx_sysp = sysp;
149 	sysp = &__kbootsvcs;
150 
151 	sysp->bsvc_getchar = _vmx_sysp->bsvc_getchar;
152 	sysp->bsvc_putchar = _stack_safe_putchar;
153 	sysp->bsvc_ischar = _vmx_sysp->bsvc_ischar;
154 #endif
155 	/*
156 	 * initialize cpu_self
157 	 */
158 	cpu[0]->cpu_self = cpu[0];
159 
160 	/*
161 	 * Set up dummy cpu_pri_data values till psm spl code is
162 	 * installed.  This allows splx() to work on amd64.
163 	 */
164 
165 	cpu[0]->cpu_pri_data = dummy_cpu_pri;
166 
167 	/*
168 	 * check if we've got special bits to clear or set
169 	 * when checking cpu features
170 	 */
171 
172 	cpuid_feature_ecx_include =
173 	    cpuid_getval("cpuid_feature_ecx_include");
174 	cpuid_feature_ecx_exclude =
175 	    cpuid_getval("cpuid_feature_ecx_exclude");
176 	cpuid_feature_edx_include =
177 	    cpuid_getval("cpuid_feature_edx_include");
178 	cpuid_feature_edx_exclude =
179 	    cpuid_getval("cpuid_feature_edx_exclude");
180 
181 	/*
182 	 * The first lightweight pass (pass0) through the cpuid data
183 	 * was done in locore before mlsetup was called.  Do the next
184 	 * pass in C code.
185 	 *
186 	 * The x86_feature bits are set here on the basis of the capabilities
187 	 * of the boot CPU.  Note that if we choose to support CPUs that have
188 	 * different feature sets (at which point we would almost certainly
189 	 * want to set the feature bits to correspond to the feature
190 	 * minimum) this value may be altered.
191 	 */
192 
193 	x86_feature = cpuid_pass1(cpu[0]);
194 
195 	/*
196 	 * Initialize idt0, gdt0, ldt0_default, ktss0 and dftss.
197 	 */
198 	init_tables();
199 
200 #if defined(__amd64)
201 	/*CSTYLED*/
202 	{
203 		/*
204 		 * setup %gs for the kernel
205 		 */
206 		wrmsr(MSR_AMD_GSBASE, (uint64_t)&cpus[0]);
207 		/*
208 		 * XX64 We should never dereference off "other gsbase" or
209 		 * "fsbase".  So, we should arrange to point FSBASE and
210 		 * KGSBASE somewhere truly awful e.g. point it at the last
211 		 * valid address below the hole so that any attempts to index
212 		 * off them cause an exception.
213 		 *
214 		 * For now, point it at 8G -- at least it should be unmapped
215 		 * until some 64-bit processes run.
216 		 */
217 		wrmsr(MSR_AMD_FSBASE, 0x200000000UL);
218 		wrmsr(MSR_AMD_KGSBASE, 0x200000000UL);
219 	}
220 
221 #elif defined(__i386)
222 	/*
223 	 * enable large page support right here.
224 	 */
225 	if (x86_feature & X86_LARGEPAGE) {
226 		cr4_value |= CR4_PSE;
227 		if (x86_feature & X86_PGE)
228 			cr4_value |= CR4_PGE;
229 		setup_121_andcall(enable_big_page_support, cr4_value);
230 	}
231 
232 	/*
233 	 * Some i386 processors do not implement the rdtsc instruction,
234 	 * or at least they do not implement it correctly.
235 	 *
236 	 * For those that do, patch in the rdtsc instructions in
237 	 * various parts of the kernel right now while the text is
238 	 * still writable.
239 	 */
240 	if (x86_feature & X86_TSC)
241 		patch_tsc();
242 #endif
243 
244 	/*
245 	 * initialize t0
246 	 */
247 	t0.t_stk = (caddr_t)rp - MINFRAME;
248 	t0.t_stkbase = t0stack;
249 	t0.t_pri = maxclsyspri - 3;
250 	t0.t_schedflag = TS_LOAD | TS_DONT_SWAP;
251 	t0.t_procp = &p0;
252 	t0.t_plockp = &p0lock.pl_lock;
253 	t0.t_lwp = &lwp0;
254 	t0.t_forw = &t0;
255 	t0.t_back = &t0;
256 	t0.t_next = &t0;
257 	t0.t_prev = &t0;
258 	t0.t_cpu = cpu[0];
259 	t0.t_disp_queue = &cpu0_disp;
260 	t0.t_bind_cpu = PBIND_NONE;
261 	t0.t_bind_pset = PS_NONE;
262 	t0.t_cpupart = &cp_default;
263 	t0.t_clfuncs = &sys_classfuncs.thread;
264 	t0.t_copyops = NULL;
265 	THREAD_ONPROC(&t0, CPU);
266 
267 	lwp0.lwp_thread = &t0;
268 	lwp0.lwp_regs = (void *) rp;
269 	lwp0.lwp_procp = &p0;
270 	t0.t_tid = p0.p_lwpcnt = p0.p_lwprcnt = p0.p_lwpid = 1;
271 
272 	p0.p_exec = NULL;
273 	p0.p_stat = SRUN;
274 	p0.p_flag = SSYS;
275 	p0.p_tlist = &t0;
276 	p0.p_stksize = 2*PAGESIZE;
277 	p0.p_stkpageszc = 0;
278 	p0.p_as = &kas;
279 	p0.p_lockp = &p0lock;
280 	p0.p_brkpageszc = 0;
281 	sigorset(&p0.p_ignore, &ignoredefault);
282 
283 	CPU->cpu_thread = &t0;
284 	bzero(&cpu0_disp, sizeof (disp_t));
285 	CPU->cpu_disp = &cpu0_disp;
286 	CPU->cpu_disp->disp_cpu = CPU;
287 	CPU->cpu_dispthread = &t0;
288 	CPU->cpu_idle_thread = &t0;
289 	CPU->cpu_flags = CPU_READY | CPU_RUNNING | CPU_EXISTS | CPU_ENABLE;
290 	CPU->cpu_dispatch_pri = t0.t_pri;
291 
292 	CPU->cpu_mask = 1;
293 	CPU->cpu_id = 0;
294 
295 	CPU->cpu_tss = &ktss0;
296 
297 	CPU->cpu_pri = 12;		/* initial PIL for the boot CPU */
298 
299 	CPU->cpu_ldt = ldt0_default;	/* default LDT */
300 	CPU->cpu_gdt = gdt0;
301 
302 	/*
303 	 * This must be done _after_ init_tables(), called above, has set up
304 	 * ldt0_default_desc.
305 	 */
306 #if defined(__amd64)
307 	/*
308 	 * ldt0_default64 contains all invalid entries. We use that as p0's LDT
309 	 * because p0 should never have any reason to use the LDT. This will
310 	 * catch things early if such a scenario should ever occur.
311 	 */
312 	p0.p_ldt_desc = ldt0_default64_desc;
313 #else
314 	p0.p_ldt_desc = ldt0_default_desc;
315 #endif /* __amd64 */
316 
317 	/*
318 	 * Kernel IDT.
319 	 */
320 	CPU->cpu_idt = idt0;
321 
322 	/*
323 	 * Initialize thread/cpu microstate accounting here
324 	 */
325 	init_mstate(&t0, LMS_SYSTEM);
326 	init_cpu_mstate(CPU, CMS_SYSTEM);
327 
328 	/*
329 	 * Initialize lists of available and active CPUs.
330 	 */
331 	cpu_list_init(CPU);
332 
333 	cpu_vm_data_init(CPU);
334 
335 	/* lgrp_init() needs PCI config space access */
336 	pci_cfgspace_init();
337 
338 	/*
339 	 * Initialize the lgrp framework
340 	 */
341 	lgrp_init();
342 
343 	/*
344 	 * The lgroup code needs to at least know about a CPU's
345 	 * chip association, but it's too early to fully initialize
346 	 * cpu0_chip, since the device node for the boot CPU doesn't
347 	 * exist yet. Initialize enough of it to get by until formal
348 	 * initialization.
349 	 */
350 	CPU->cpu_rechoose = rechoose_interval;
351 	CPU->cpu_chip = &cpu0_chip;
352 
353 	rp->r_fp = 0;	/* terminate kernel stack traces! */
354 
355 	prom_init("kernel", (void *)NULL);
356 
357 	if (boothowto & RB_HALT) {
358 		prom_printf("unix: kernel halted by -h flag\n");
359 		prom_enter_mon();
360 	}
361 
362 	ASSERT_STACK_ALIGNED();
363 
364 	if (workaround_errata(CPU) != 0)
365 		panic("critical workaround(s) missing for boot cpu");
366 }
367