1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright (c) 2012 Gary Mills 23 * 24 * Copyright (c) 1993, 2010, Oracle and/or its affiliates. All rights reserved. 25 * Copyright (c) 2011 by Delphix. All rights reserved. 26 * Copyright 2018 Joyent, Inc. 27 */ 28 /* 29 * Copyright (c) 2010, Intel Corporation. 30 * All rights reserved. 31 */ 32 33 #include <sys/types.h> 34 #include <sys/sysmacros.h> 35 #include <sys/disp.h> 36 #include <sys/promif.h> 37 #include <sys/clock.h> 38 #include <sys/cpuvar.h> 39 #include <sys/stack.h> 40 #include <vm/as.h> 41 #include <vm/hat.h> 42 #include <sys/reboot.h> 43 #include <sys/avintr.h> 44 #include <sys/vtrace.h> 45 #include <sys/proc.h> 46 #include <sys/thread.h> 47 #include <sys/cpupart.h> 48 #include <sys/pset.h> 49 #include <sys/copyops.h> 50 #include <sys/pg.h> 51 #include <sys/disp.h> 52 #include <sys/debug.h> 53 #include <sys/sunddi.h> 54 #include <sys/x86_archext.h> 55 #include <sys/privregs.h> 56 #include <sys/machsystm.h> 57 #include <sys/ontrap.h> 58 #include <sys/bootconf.h> 59 #include <sys/boot_console.h> 60 #include <sys/kdi_machimpl.h> 61 #include <sys/archsystm.h> 62 #include <sys/promif.h> 63 #include <sys/pci_cfgspace.h> 64 #include <sys/bootvfs.h> 65 #include <sys/tsc.h> 66 #ifdef __xpv 67 #include <sys/hypervisor.h> 68 #else 69 #include <sys/xpv_support.h> 70 #endif 71 72 /* 73 * some globals for patching the result of cpuid 74 * to solve problems w/ creative cpu vendors 75 */ 76 77 extern uint32_t cpuid_feature_ecx_include; 78 extern uint32_t cpuid_feature_ecx_exclude; 79 extern uint32_t cpuid_feature_edx_include; 80 extern uint32_t cpuid_feature_edx_exclude; 81 82 /* 83 * Set console mode 84 */ 85 static void 86 set_console_mode(uint8_t val) 87 { 88 struct bop_regs rp = {0}; 89 90 rp.eax.byte.ah = 0x0; 91 rp.eax.byte.al = val; 92 rp.ebx.word.bx = 0x0; 93 94 BOP_DOINT(bootops, 0x10, &rp); 95 } 96 97 98 /* 99 * Setup routine called right before main(). Interposing this function 100 * before main() allows us to call it in a machine-independent fashion. 101 */ 102 void 103 mlsetup(struct regs *rp) 104 { 105 u_longlong_t prop_value; 106 extern struct classfuncs sys_classfuncs; 107 extern disp_t cpu0_disp; 108 extern char t0stack[]; 109 extern int post_fastreboot; 110 extern uint64_t plat_dr_options; 111 112 ASSERT_STACK_ALIGNED(); 113 114 /* 115 * initialize cpu_self 116 */ 117 cpu[0]->cpu_self = cpu[0]; 118 119 #if defined(__xpv) 120 /* 121 * Point at the hypervisor's virtual cpu structure 122 */ 123 cpu[0]->cpu_m.mcpu_vcpu_info = &HYPERVISOR_shared_info->vcpu_info[0]; 124 #endif 125 126 /* 127 * check if we've got special bits to clear or set 128 * when checking cpu features 129 */ 130 131 if (bootprop_getval("cpuid_feature_ecx_include", &prop_value) != 0) 132 cpuid_feature_ecx_include = 0; 133 else 134 cpuid_feature_ecx_include = (uint32_t)prop_value; 135 136 if (bootprop_getval("cpuid_feature_ecx_exclude", &prop_value) != 0) 137 cpuid_feature_ecx_exclude = 0; 138 else 139 cpuid_feature_ecx_exclude = (uint32_t)prop_value; 140 141 if (bootprop_getval("cpuid_feature_edx_include", &prop_value) != 0) 142 cpuid_feature_edx_include = 0; 143 else 144 cpuid_feature_edx_include = (uint32_t)prop_value; 145 146 if (bootprop_getval("cpuid_feature_edx_exclude", &prop_value) != 0) 147 cpuid_feature_edx_exclude = 0; 148 else 149 cpuid_feature_edx_exclude = (uint32_t)prop_value; 150 151 #if !defined(__xpv) 152 /* 153 * Check to see if KPTI has been explicitly enabled or disabled. 154 * We have to check this before init_desctbls(). 155 */ 156 if (bootprop_getval("kpti", &prop_value) == 0) { 157 kpti_enable = (uint64_t)(prop_value == 1); 158 prom_printf("unix: forcing kpti to %s due to boot argument\n", 159 (kpti_enable == 1) ? "ON" : "OFF"); 160 } else { 161 kpti_enable = 1; 162 } 163 164 if (bootprop_getval("pcid", &prop_value) == 0 && prop_value == 0) { 165 prom_printf("unix: forcing pcid to OFF due to boot argument\n"); 166 x86_use_pcid = 0; 167 } else if (kpti_enable != 1) { 168 x86_use_pcid = 0; 169 } 170 #endif 171 172 /* 173 * Initialize idt0, gdt0, ldt0_default, ktss0 and dftss. 174 */ 175 init_desctbls(); 176 177 /* 178 * lgrp_init() and possibly cpuid_pass1() need PCI config 179 * space access 180 */ 181 #if defined(__xpv) 182 if (DOMAIN_IS_INITDOMAIN(xen_info)) 183 pci_cfgspace_init(); 184 #else 185 pci_cfgspace_init(); 186 /* 187 * Initialize the platform type from CPU 0 to ensure that 188 * determine_platform() is only ever called once. 189 */ 190 determine_platform(); 191 #endif 192 193 /* 194 * The first lightweight pass (pass0) through the cpuid data 195 * was done in locore before mlsetup was called. Do the next 196 * pass in C code. 197 * 198 * The x86_featureset is initialized here based on the capabilities 199 * of the boot CPU. Note that if we choose to support CPUs that have 200 * different feature sets (at which point we would almost certainly 201 * want to set the feature bits to correspond to the feature 202 * minimum) this value may be altered. 203 */ 204 cpuid_pass1(cpu[0], x86_featureset); 205 206 #if !defined(__xpv) 207 if ((get_hwenv() & HW_XEN_HVM) != 0) 208 xen_hvm_init(); 209 210 /* 211 * Before we do anything with the TSCs, we need to work around 212 * Intel erratum BT81. On some CPUs, warm reset does not 213 * clear the TSC. If we are on such a CPU, we will clear TSC ourselves 214 * here. Other CPUs will clear it when we boot them later, and the 215 * resulting skew will be handled by tsc_sync_master()/_slave(); 216 * note that such skew already exists and has to be handled anyway. 217 * 218 * We do this only on metal. This same problem can occur with a 219 * hypervisor that does not happen to virtualise a TSC that starts from 220 * zero, regardless of CPU type; however, we do not expect hypervisors 221 * that do not virtualise TSC that way to handle writes to TSC 222 * correctly, either. 223 */ 224 if (get_hwenv() == HW_NATIVE && 225 cpuid_getvendor(CPU) == X86_VENDOR_Intel && 226 cpuid_getfamily(CPU) == 6 && 227 (cpuid_getmodel(CPU) == 0x2d || cpuid_getmodel(CPU) == 0x3e) && 228 is_x86_feature(x86_featureset, X86FSET_TSC)) { 229 (void) wrmsr(REG_TSC, 0UL); 230 } 231 232 /* 233 * Patch the tsc_read routine with appropriate set of instructions, 234 * depending on the processor family and architecure, to read the 235 * time-stamp counter while ensuring no out-of-order execution. 236 * Patch it while the kernel text is still writable. 237 * 238 * Note: tsc_read is not patched for intel processors whose family 239 * is >6 and for amd whose family >f (in case they don't support rdtscp 240 * instruction, unlikely). By default tsc_read will use cpuid for 241 * serialization in such cases. The following code needs to be 242 * revisited if intel processors of family >= f retains the 243 * instruction serialization nature of mfence instruction. 244 * Note: tsc_read is not patched for x86 processors which do 245 * not support "mfence". By default tsc_read will use cpuid for 246 * serialization in such cases. 247 * 248 * The Xen hypervisor does not correctly report whether rdtscp is 249 * supported or not, so we must assume that it is not. 250 */ 251 if ((get_hwenv() & HW_XEN_HVM) == 0 && 252 is_x86_feature(x86_featureset, X86FSET_TSCP)) 253 patch_tsc_read(TSC_TSCP); 254 else if (cpuid_getvendor(CPU) == X86_VENDOR_AMD && 255 cpuid_getfamily(CPU) <= 0xf && 256 is_x86_feature(x86_featureset, X86FSET_SSE2)) 257 patch_tsc_read(TSC_RDTSC_MFENCE); 258 else if (cpuid_getvendor(CPU) == X86_VENDOR_Intel && 259 cpuid_getfamily(CPU) <= 6 && 260 is_x86_feature(x86_featureset, X86FSET_SSE2)) 261 patch_tsc_read(TSC_RDTSC_LFENCE); 262 263 #endif /* !__xpv */ 264 265 #if defined(__i386) && !defined(__xpv) 266 /* 267 * Some i386 processors do not implement the rdtsc instruction, 268 * or at least they do not implement it correctly. Patch them to 269 * return 0. 270 */ 271 if (!is_x86_feature(x86_featureset, X86FSET_TSC)) 272 patch_tsc_read(TSC_NONE); 273 #endif /* __i386 && !__xpv */ 274 275 #if defined(__amd64) && !defined(__xpv) 276 patch_memops(cpuid_getvendor(CPU)); 277 #endif /* __amd64 && !__xpv */ 278 279 #if !defined(__xpv) 280 /* XXPV what, if anything, should be dorked with here under xen? */ 281 282 /* 283 * While we're thinking about the TSC, let's set up %cr4 so that 284 * userland can issue rdtsc, and initialize the TSC_AUX value 285 * (the cpuid) for the rdtscp instruction on appropriately 286 * capable hardware. 287 */ 288 if (is_x86_feature(x86_featureset, X86FSET_TSC)) 289 setcr4(getcr4() & ~CR4_TSD); 290 291 if (is_x86_feature(x86_featureset, X86FSET_TSCP)) 292 (void) wrmsr(MSR_AMD_TSCAUX, 0); 293 294 /* 295 * Let's get the other %cr4 stuff while we're here. Note, we defer 296 * enabling CR4_SMAP until startup_end(); however, that's importantly 297 * before we start other CPUs. That ensures that it will be synced out 298 * to other CPUs. 299 */ 300 if (is_x86_feature(x86_featureset, X86FSET_DE)) 301 setcr4(getcr4() | CR4_DE); 302 303 if (is_x86_feature(x86_featureset, X86FSET_SMEP)) 304 setcr4(getcr4() | CR4_SMEP); 305 #endif /* __xpv */ 306 307 /* 308 * initialize t0 309 */ 310 t0.t_stk = (caddr_t)rp - MINFRAME; 311 t0.t_stkbase = t0stack; 312 t0.t_pri = maxclsyspri - 3; 313 t0.t_schedflag = TS_LOAD | TS_DONT_SWAP; 314 t0.t_procp = &p0; 315 t0.t_plockp = &p0lock.pl_lock; 316 t0.t_lwp = &lwp0; 317 t0.t_forw = &t0; 318 t0.t_back = &t0; 319 t0.t_next = &t0; 320 t0.t_prev = &t0; 321 t0.t_cpu = cpu[0]; 322 t0.t_disp_queue = &cpu0_disp; 323 t0.t_bind_cpu = PBIND_NONE; 324 t0.t_bind_pset = PS_NONE; 325 t0.t_bindflag = (uchar_t)default_binding_mode; 326 t0.t_cpupart = &cp_default; 327 t0.t_clfuncs = &sys_classfuncs.thread; 328 t0.t_copyops = NULL; 329 THREAD_ONPROC(&t0, CPU); 330 331 lwp0.lwp_thread = &t0; 332 lwp0.lwp_regs = (void *)rp; 333 lwp0.lwp_procp = &p0; 334 t0.t_tid = p0.p_lwpcnt = p0.p_lwprcnt = p0.p_lwpid = 1; 335 336 p0.p_exec = NULL; 337 p0.p_stat = SRUN; 338 p0.p_flag = SSYS; 339 p0.p_tlist = &t0; 340 p0.p_stksize = 2*PAGESIZE; 341 p0.p_stkpageszc = 0; 342 p0.p_as = &kas; 343 p0.p_lockp = &p0lock; 344 p0.p_brkpageszc = 0; 345 p0.p_t1_lgrpid = LGRP_NONE; 346 p0.p_tr_lgrpid = LGRP_NONE; 347 psecflags_default(&p0.p_secflags); 348 349 sigorset(&p0.p_ignore, &ignoredefault); 350 351 CPU->cpu_thread = &t0; 352 bzero(&cpu0_disp, sizeof (disp_t)); 353 CPU->cpu_disp = &cpu0_disp; 354 CPU->cpu_disp->disp_cpu = CPU; 355 CPU->cpu_dispthread = &t0; 356 CPU->cpu_idle_thread = &t0; 357 CPU->cpu_flags = CPU_READY | CPU_RUNNING | CPU_EXISTS | CPU_ENABLE; 358 CPU->cpu_dispatch_pri = t0.t_pri; 359 360 CPU->cpu_id = 0; 361 362 CPU->cpu_pri = 12; /* initial PIL for the boot CPU */ 363 364 /* 365 * Initialize thread/cpu microstate accounting 366 */ 367 init_mstate(&t0, LMS_SYSTEM); 368 init_cpu_mstate(CPU, CMS_SYSTEM); 369 370 /* 371 * Initialize lists of available and active CPUs. 372 */ 373 cpu_list_init(CPU); 374 375 pg_cpu_bootstrap(CPU); 376 377 /* 378 * Now that we have taken over the GDT, IDT and have initialized 379 * active CPU list it's time to inform kmdb if present. 380 */ 381 if (boothowto & RB_DEBUG) 382 kdi_idt_sync(); 383 384 if (BOP_GETPROPLEN(bootops, "efi-systab") < 0) { 385 /* 386 * In BIOS system, explicitly set console to text mode (0x3) 387 * if this is a boot post Fast Reboot, and the console is set 388 * to CONS_SCREEN_TEXT. 389 */ 390 if (post_fastreboot && 391 boot_console_type(NULL) == CONS_SCREEN_TEXT) { 392 set_console_mode(0x3); 393 } 394 } 395 396 /* 397 * If requested (boot -d) drop into kmdb. 398 * 399 * This must be done after cpu_list_init() on the 64-bit kernel 400 * since taking a trap requires that we re-compute gsbase based 401 * on the cpu list. 402 */ 403 if (boothowto & RB_DEBUGENTER) 404 kmdb_enter(); 405 406 cpu_vm_data_init(CPU); 407 408 rp->r_fp = 0; /* terminate kernel stack traces! */ 409 410 prom_init("kernel", (void *)NULL); 411 412 /* User-set option overrides firmware value. */ 413 if (bootprop_getval(PLAT_DR_OPTIONS_NAME, &prop_value) == 0) { 414 plat_dr_options = (uint64_t)prop_value; 415 } 416 #if defined(__xpv) 417 /* No support of DR operations on xpv */ 418 plat_dr_options = 0; 419 #else /* __xpv */ 420 /* Flag PLAT_DR_FEATURE_ENABLED should only be set by DR driver. */ 421 plat_dr_options &= ~PLAT_DR_FEATURE_ENABLED; 422 #ifndef __amd64 423 /* Only enable CPU/memory DR on 64 bits kernel. */ 424 plat_dr_options &= ~PLAT_DR_FEATURE_MEMORY; 425 plat_dr_options &= ~PLAT_DR_FEATURE_CPU; 426 #endif /* __amd64 */ 427 #endif /* __xpv */ 428 429 /* 430 * Get value of "plat_dr_physmax" boot option. 431 * It overrides values calculated from MSCT or SRAT table. 432 */ 433 if (bootprop_getval(PLAT_DR_PHYSMAX_NAME, &prop_value) == 0) { 434 plat_dr_physmax = ((uint64_t)prop_value) >> PAGESHIFT; 435 } 436 437 /* Get value of boot_ncpus. */ 438 if (bootprop_getval(BOOT_NCPUS_NAME, &prop_value) != 0) { 439 boot_ncpus = NCPU; 440 } else { 441 boot_ncpus = (int)prop_value; 442 if (boot_ncpus <= 0 || boot_ncpus > NCPU) 443 boot_ncpus = NCPU; 444 } 445 446 /* 447 * Set max_ncpus and boot_max_ncpus to boot_ncpus if platform doesn't 448 * support CPU DR operations. 449 */ 450 if (plat_dr_support_cpu() == 0) { 451 max_ncpus = boot_max_ncpus = boot_ncpus; 452 } else { 453 if (bootprop_getval(PLAT_MAX_NCPUS_NAME, &prop_value) != 0) { 454 max_ncpus = NCPU; 455 } else { 456 max_ncpus = (int)prop_value; 457 if (max_ncpus <= 0 || max_ncpus > NCPU) { 458 max_ncpus = NCPU; 459 } 460 if (boot_ncpus > max_ncpus) { 461 boot_ncpus = max_ncpus; 462 } 463 } 464 465 if (bootprop_getval(BOOT_MAX_NCPUS_NAME, &prop_value) != 0) { 466 boot_max_ncpus = boot_ncpus; 467 } else { 468 boot_max_ncpus = (int)prop_value; 469 if (boot_max_ncpus <= 0 || boot_max_ncpus > NCPU) { 470 boot_max_ncpus = boot_ncpus; 471 } else if (boot_max_ncpus > max_ncpus) { 472 boot_max_ncpus = max_ncpus; 473 } 474 } 475 } 476 477 /* 478 * Initialize the lgrp framework 479 */ 480 lgrp_init(LGRP_INIT_STAGE1); 481 482 if (boothowto & RB_HALT) { 483 prom_printf("unix: kernel halted by -h flag\n"); 484 prom_enter_mon(); 485 } 486 487 ASSERT_STACK_ALIGNED(); 488 489 /* 490 * Fill out cpu_ucode_info. Update microcode if necessary. 491 */ 492 ucode_check(CPU); 493 494 if (workaround_errata(CPU) != 0) 495 panic("critical workaround(s) missing for boot cpu"); 496 } 497 498 499 void 500 mach_modpath(char *path, const char *filename) 501 { 502 /* 503 * Construct the directory path from the filename. 504 */ 505 506 int len; 507 char *p; 508 const char isastr[] = "/amd64"; 509 size_t isalen = strlen(isastr); 510 511 len = strlen(SYSTEM_BOOT_PATH "/kernel"); 512 (void) strcpy(path, SYSTEM_BOOT_PATH "/kernel "); 513 path += len + 1; 514 515 if ((p = strrchr(filename, '/')) == NULL) 516 return; 517 518 while (p > filename && *(p - 1) == '/') 519 p--; /* remove trailing '/' characters */ 520 if (p == filename) 521 p++; /* so "/" -is- the modpath in this case */ 522 523 /* 524 * Remove optional isa-dependent directory name - the module 525 * subsystem will put this back again (!) 526 */ 527 len = p - filename; 528 if (len > isalen && 529 strncmp(&filename[len - isalen], isastr, isalen) == 0) 530 p -= isalen; 531 532 /* 533 * "/platform/mumblefrotz" + " " + MOD_DEFPATH 534 */ 535 len += (p - filename) + 1 + strlen(MOD_DEFPATH) + 1; 536 (void) strncpy(path, filename, p - filename); 537 } 538