xref: /illumos-gate/usr/src/uts/i86pc/io/psm/uppc.c (revision 66582b606a8194f7f3ba5b3a3a6dca5b0d346361)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  * Copyright 2018 Joyent, Inc.
25  */
26 
27 #define	PSMI_1_7
28 
29 #include <sys/mutex.h>
30 #include <sys/types.h>
31 #include <sys/time.h>
32 #include <sys/machlock.h>
33 #include <sys/smp_impldefs.h>
34 #include <sys/uadmin.h>
35 #include <sys/promif.h>
36 #include <sys/psm.h>
37 #include <sys/pit.h>
38 #include <sys/apic.h>
39 #include <sys/psm_common.h>
40 #include <sys/atomic.h>
41 #include <sys/archsystm.h>
42 
43 #define	NSEC_IN_SEC		1000000000
44 
45 /*
46  * Local Function Prototypes
47  */
48 static void uppc_softinit(void);
49 static void uppc_picinit();
50 static int uppc_post_cpu_start(void);
51 static int uppc_clkinit(int);
52 static int uppc_addspl(int irqno, int ipl, int min_ipl, int max_ipl);
53 static int uppc_delspl(int irqno, int ipl, int min_ipl, int max_ipl);
54 static processorid_t uppc_get_next_processorid(processorid_t cpu_id);
55 static int uppc_get_clockirq(int ipl);
56 static int uppc_probe(void);
57 static int uppc_translate_irq(dev_info_t *dip, int irqno);
58 static void uppc_shutdown(int cmd, int fcn);
59 static void uppc_preshutdown(int cmd, int fcn);
60 static int uppc_state(psm_state_request_t *request);
61 static int uppc_init_acpi(void);
62 static void uppc_setspl(int);
63 static int uppc_intr_enter(int, int *);
64 static void uppc_intr_exit(int, int);
65 static hrtime_t uppc_gethrtime();
66 
67 static int uppc_acpi_irq_configure(acpi_psm_lnk_t *acpipsmlnkp, dev_info_t *dip,
68     int *pci_irqp, iflag_t *intr_flagp);
69 
70 /*
71  * Global Data
72  */
73 static struct standard_pic pics0;
74 int uppc_use_acpi = 1;	/* Use ACPI by default */
75 int uppc_enable_acpi = 0;
76 
77 
78 /*
79  * For interrupt link devices, if uppc_unconditional_srs is set, an irq resource
80  * will be assigned (via _SRS). If it is not set, use the current
81  * irq setting (via _CRS), but only if that irq is in the set of possible
82  * irqs (returned by _PRS) for the device.
83  */
84 int uppc_unconditional_srs = 1;
85 
86 /*
87  * For interrupt link devices, if uppc_prefer_crs is set when we are
88  * assigning an IRQ resource to a device, prefer the current IRQ setting
89  * over other possible irq settings under same conditions.
90  */
91 int uppc_prefer_crs = 1;
92 
93 int uppc_verbose = 0;
94 
95 /* flag definitions for uppc_verbose */
96 #define	UPPC_VERBOSE_IRQ_FLAG			0x00000001
97 #define	UPPC_VERBOSE_POWEROFF_FLAG		0x00000002
98 #define	UPPC_VERBOSE_POWEROFF_PAUSE_FLAG	0x00000004
99 
100 
101 #define	UPPC_VERBOSE_IRQ(fmt) \
102 	if (uppc_verbose & UPPC_VERBOSE_IRQ_FLAG) \
103 		cmn_err fmt;
104 
105 #define	UPPC_VERBOSE_POWEROFF(fmt) \
106 	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_FLAG) \
107 		prom_printf fmt;
108 
109 uchar_t uppc_reserved_irqlist[MAX_ISA_IRQ + 1];
110 
111 static uint16_t uppc_irq_shared_table[MAX_ISA_IRQ + 1];
112 
113 /*
114  * Contains SCI irqno from FADT after initialization
115  */
116 static int uppc_sci = -1;
117 
118 /*
119  * Local Static Data
120  */
121 
122 static lock_t uppc_gethrtime_lock;
123 static hrtime_t uppc_lasthrtime;
124 
125 
126 #ifdef UPPC_DEBUG
127 #define	DENT	0x0001
128 
129 static int	uppc_debug = 0;
130 
131 
132 #endif
133 
134 
135 static struct	psm_ops uppc_ops = {
136 	uppc_probe,				/* psm_probe		*/
137 
138 	uppc_softinit,				/* psm_init		*/
139 	uppc_picinit,				/* psm_picinit		*/
140 	uppc_intr_enter,			/* psm_intr_enter	*/
141 	uppc_intr_exit,				/* psm_intr_exit	*/
142 	uppc_setspl,				/* psm_setspl		*/
143 	uppc_addspl,				/* psm_addspl		*/
144 	uppc_delspl,				/* psm_delspl		*/
145 	(int (*)(processorid_t))NULL,		/* psm_disable_intr	*/
146 	(void (*)(processorid_t))NULL,		/* psm_enable_intr	*/
147 	(int (*)(int))NULL,			/* psm_softlvl_to_irq	*/
148 	(void (*)(int))NULL,			/* psm_set_softintr	*/
149 	(void (*)(processorid_t))NULL,		/* psm_set_idlecpu	*/
150 	(void (*)(processorid_t))NULL,		/* psm_unset_idlecpu	*/
151 
152 	uppc_clkinit,				/* psm_clkinit		*/
153 	uppc_get_clockirq,			/* psm_get_clockirq	*/
154 	(void (*)(void))NULL,			/* psm_hrtimeinit	*/
155 	uppc_gethrtime,				/* psm_gethrtime	*/
156 
157 	uppc_get_next_processorid,		/* psm_get_next_processorid */
158 	(int (*)(processorid_t, caddr_t))NULL,	/* psm_cpu_start	*/
159 	uppc_post_cpu_start,			/* psm_post_cpu_start	*/
160 	uppc_shutdown,				/* psm_shutdown		*/
161 	(int (*)(int, int))NULL,		/* psm_get_ipivect	*/
162 	(void (*)(processorid_t, int))NULL,	/* psm_send_ipi		*/
163 
164 	uppc_translate_irq,			/* psm_translate_irq	*/
165 
166 	(void (*)(int, char *))NULL,		/* psm_notify_error	*/
167 	(void (*)(int msg))NULL,		/* psm_notify_func	*/
168 	(void (*)(hrtime_t time))NULL,		/* psm_timer_reprogram	*/
169 	(void (*)(void))NULL,			/* psm_timer_enable	*/
170 	(void (*)(void))NULL,			/* psm_timer_disable	*/
171 	(void (*)(void *arg))NULL,		/* psm_post_cyclic_setup */
172 	uppc_preshutdown,			/* psm_preshutdown	*/
173 
174 	(int (*)(dev_info_t *, ddi_intr_handle_impl_t *,
175 	    psm_intr_op_t, int *))NULL,		/* psm_intr_ops		*/
176 
177 	uppc_state,				/* psm_state		*/
178 	(int (*)(psm_cpu_request_t *))NULL,	/* psm_cpu_ops		*/
179 
180 	(int (*)(void))NULL,			/* psm_get_pir_ipivect	*/
181 	(void (*)(processorid_t))NULL,		/* psm_send_pir_ipi	*/
182 	(void (*)(processorid_t, boolean_t))NULL	/* psm_cmci_setup */
183 };
184 
185 
186 static struct	psm_info uppc_info = {
187 	PSM_INFO_VER01_7,	/* version				*/
188 	PSM_OWN_SYS_DEFAULT,	/* ownership				*/
189 	(struct psm_ops *)&uppc_ops, /* operation			*/
190 	"uppc",			/* machine name				*/
191 	"UniProcessor PC",	/* machine descriptions			*/
192 };
193 
194 /*
195  * Configuration Data
196  */
197 
198 /*
199  * This is the loadable module wrapper.
200  */
201 #include <sys/modctl.h>
202 
203 static void *uppc_hdlp;
204 
205 int
206 _init(void)
207 {
208 	return (psm_mod_init(&uppc_hdlp, &uppc_info));
209 }
210 
211 int
212 _fini(void)
213 {
214 	return (psm_mod_fini(&uppc_hdlp, &uppc_info));
215 }
216 
217 int
218 _info(struct modinfo *modinfop)
219 {
220 	return (psm_mod_info(&uppc_hdlp, &uppc_info, modinfop));
221 }
222 
223 /*
224  * Autoconfiguration Routines
225  */
226 
227 static int
228 uppc_probe(void)
229 {
230 
231 
232 	return (PSM_SUCCESS);
233 }
234 
235 static void
236 uppc_softinit(void)
237 {
238 	struct standard_pic *pp;
239 	int i;
240 
241 	pp = &pics0;
242 
243 
244 	if (uppc_use_acpi && uppc_init_acpi()) {
245 		build_reserved_irqlist((uchar_t *)uppc_reserved_irqlist);
246 		for (i = 0; i <= MAX_ISA_IRQ; i++)
247 			uppc_irq_shared_table[i] = 0;
248 		uppc_enable_acpi = 1;
249 	}
250 
251 	/*
252 	 * initialize the ipl mask
253 	 */
254 	for (i = 0; i < (MAXIPL << 1); i += 2) {
255 		/* enable slave lines on master */
256 		pp->c_iplmask[i] = 0xff;
257 		pp->c_iplmask[i+1] = (0xff & ~(1 << MASTERLINE));
258 	}
259 }
260 
261 /*ARGSUSED*/
262 static int
263 uppc_clkinit(int hertz)
264 {
265 	ulong_t clkticks = PIT_HZ / hz;
266 
267 	if (hertz == 0)
268 		return (0);	/* One shot mode not supported */
269 
270 	/*
271 	 * program timer 0
272 	 */
273 	outb(PITCTL_PORT, (PIT_C0|PIT_NDIVMODE|PIT_READMODE));
274 	outb(PITCTR0_PORT, (uchar_t)clkticks);
275 	outb(PITCTR0_PORT, (uchar_t)(clkticks>>8));
276 
277 	return (NSEC_IN_SEC / hertz);
278 }
279 
280 static void
281 uppc_picinit()
282 {
283 	picsetup();
284 
285 	/*
286 	 * If a valid SCI is present, manually addspl()
287 	 * since we're not set-up early enough in boot
288 	 * to do it "conventionally" (via add_avintr)
289 	 */
290 	if (uppc_sci >= 0)
291 		(void) uppc_addspl(uppc_sci, SCI_IPL, SCI_IPL, SCI_IPL);
292 }
293 
294 static int
295 uppc_post_cpu_start(void)
296 {
297 	/*
298 	 * On uppc machines psm_post_cpu_start is called during S3 resume
299 	 * on the boot cpu from assembly, using the ap_mlsetup vector.
300 	 */
301 
302 	/*
303 	 * Init master and slave pic
304 	 */
305 	picsetup();
306 
307 	/*
308 	 * program timer 0
309 	 */
310 	(void) uppc_clkinit(hz);
311 
312 	return (PSM_SUCCESS);
313 }
314 
315 /*ARGSUSED3*/
316 static int
317 uppc_addspl(int irqno, int ipl, int min_ipl, int max_ipl)
318 {
319 	struct standard_pic *pp;
320 	int i;
321 	int startidx;
322 	uchar_t	vectmask;
323 
324 	if (irqno <= MAX_ISA_IRQ)
325 		atomic_inc_16(&uppc_irq_shared_table[irqno]);
326 
327 	if (ipl != min_ipl)
328 		return (0);
329 
330 	if (irqno > 7) {
331 		vectmask = 1 << (irqno - 8);
332 		startidx = (ipl << 1);
333 	} else {
334 		vectmask = 1 << irqno;
335 		startidx = (ipl << 1) + 1;
336 	}
337 
338 	/*
339 	 * mask intr same or above ipl
340 	 * level MAXIPL has all intr off as init. default
341 	 */
342 	pp = &pics0;
343 	for (i = startidx; i < (MAXIPL << 1); i += 2) {
344 		if (pp->c_iplmask[i] & vectmask)
345 			break;
346 		pp->c_iplmask[i] |= vectmask;
347 	}
348 
349 	/*
350 	 * unmask intr below ipl
351 	 */
352 	for (i = startidx-2; i >= 0; i -= 2) {
353 		if (!(pp->c_iplmask[i] & vectmask))
354 			break;
355 		pp->c_iplmask[i] &= ~vectmask;
356 	}
357 	return (0);
358 }
359 
360 static int
361 uppc_delspl(int irqno, int ipl, int min_ipl, int max_ipl)
362 {
363 	struct standard_pic *pp;
364 	int i;
365 	uchar_t	vectmask;
366 
367 	if (irqno <= MAX_ISA_IRQ)
368 		atomic_dec_16(&uppc_irq_shared_table[irqno]);
369 
370 	/*
371 	 * skip if we are not deleting the last handler
372 	 * and the ipl is higher than minimum
373 	 */
374 	if ((max_ipl != PSM_INVALID_IPL) && (ipl >= min_ipl))
375 		return (0);
376 
377 	if (irqno > 7) {
378 		vectmask = 1 << (irqno - 8);
379 		i = 0;
380 	} else {
381 		vectmask = 1 << irqno;
382 		i = 1;
383 	}
384 
385 	pp = &pics0;
386 
387 	/*
388 	 * check any handlers left for this irqno
389 	 */
390 	if (max_ipl != PSM_INVALID_IPL) {
391 		/*
392 		 * unmasks all levels below the lowest priority
393 		 */
394 		i += ((min_ipl - 1) << 1);
395 		for (; i >= 0; i -= 2) {
396 			if (!(pp->c_iplmask[i] & vectmask))
397 				break;
398 			pp->c_iplmask[i] &= ~vectmask;
399 		}
400 	} else {
401 		/*
402 		 * set mask to all levels
403 		 */
404 		for (; i < (MAXIPL << 1); i += 2) {
405 			if (pp->c_iplmask[i] & vectmask)
406 				break;
407 			pp->c_iplmask[i] |= vectmask;
408 		}
409 	}
410 	return (0);
411 }
412 
413 static processorid_t
414 uppc_get_next_processorid(processorid_t cpu_id)
415 {
416 	if (cpu_id == -1)
417 		return (0);
418 	return (-1);
419 }
420 
421 /*ARGSUSED*/
422 static int
423 uppc_get_clockirq(int ipl)
424 {
425 	return (CLOCK_VECTOR);
426 }
427 
428 
429 static int
430 uppc_init_acpi(void)
431 {
432 	int verboseflags = 0;
433 	int	sci;
434 	iflag_t sci_flags;
435 
436 	/*
437 	 * Process SCI configuration here; this may return
438 	 * an error if acpi-user-options has specified
439 	 * legacy mode (use ACPI without ACPI mode or SCI)
440 	 */
441 	if (acpica_get_sci(&sci, &sci_flags) != AE_OK)
442 		sci = -1;
443 
444 	/*
445 	 * Initialize sub-system - if error is returns, ACPI is not
446 	 * used.
447 	 */
448 	if (acpica_init() != AE_OK)
449 		return (0);
450 
451 	/*
452 	 * uppc implies system is in PIC mode; set edge/level
453 	 * via ELCR based on return value from get_sci; this
454 	 * will default to level/low if no override present,
455 	 * as recommended by Intel ACPI CA team.
456 	 */
457 	if (sci >= 0) {
458 		ASSERT((sci_flags.intr_el == INTR_EL_LEVEL) ||
459 		    (sci_flags.intr_el == INTR_EL_EDGE));
460 
461 		psm_set_elcr(sci, sci_flags.intr_el == INTR_EL_LEVEL);
462 	}
463 
464 	/*
465 	 * Remember SCI for later use
466 	 */
467 	uppc_sci = sci;
468 
469 	if (uppc_verbose & UPPC_VERBOSE_IRQ_FLAG)
470 		verboseflags |= PSM_VERBOSE_IRQ_FLAG;
471 
472 	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_FLAG)
473 		verboseflags |= PSM_VERBOSE_POWEROFF_FLAG;
474 
475 	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_PAUSE_FLAG)
476 		verboseflags |= PSM_VERBOSE_POWEROFF_PAUSE_FLAG;
477 
478 	if (acpi_psm_init(uppc_info.p_mach_idstring, verboseflags) ==
479 	    ACPI_PSM_FAILURE) {
480 		return (0);
481 	}
482 
483 	return (1);
484 }
485 
486 
487 static void
488 uppc_preshutdown(int cmd, int fcn)
489 {
490 	UPPC_VERBOSE_POWEROFF(("uppc_preshutdown(%d,%d);\n", cmd, fcn));
491 
492 }
493 
494 static void
495 uppc_shutdown(int cmd, int fcn)
496 {
497 	UPPC_VERBOSE_POWEROFF(("uppc_shutdown(%d,%d);\n", cmd, fcn));
498 
499 	/*
500 	 * Return if passed a command other than A_SHUTDOWN or
501 	 * if we're not using ACPI.
502 	 */
503 	if ((cmd != A_SHUTDOWN) || (!uppc_enable_acpi))
504 		return;
505 
506 	/*
507 	 * Switch system back into Legacy-Mode if using ACPI and
508 	 * not powering-off.  Some BIOSes need to remain in ACPI-mode
509 	 * for power-off to succeed (Dell Dimension 4600)
510 	 */
511 	if (fcn != AD_POWEROFF) {
512 		(void) AcpiDisable();
513 		return;
514 	}
515 
516 	(void) acpi_poweroff();
517 }
518 
519 
520 static int
521 uppc_acpi_enter_picmode(void)
522 {
523 	ACPI_OBJECT_LIST	arglist;
524 	ACPI_OBJECT		arg;
525 	ACPI_STATUS		status;
526 
527 	/* Setup parameter object */
528 	arglist.Count = 1;
529 	arglist.Pointer = &arg;
530 	arg.Type = ACPI_TYPE_INTEGER;
531 	arg.Integer.Value = ACPI_PIC_MODE;
532 
533 	status = AcpiEvaluateObject(NULL, "\\_PIC", &arglist, NULL);
534 	if (ACPI_FAILURE(status))
535 		return (PSM_FAILURE);
536 	else
537 		return (PSM_SUCCESS);
538 }
539 
540 
541 struct pic_state {
542 	int8_t		mmask;
543 	int8_t		smask;
544 	uint16_t	elcr;
545 };
546 
547 
548 static void
549 pic_save_state(struct pic_state *sp)
550 {
551 	struct standard_pic *pp;
552 	int	vecno;
553 
554 	/*
555 	 * Only the PIC masks and the ELCR can be saved;
556 	 * other 8259 state is write-only
557 	 */
558 
559 	/*
560 	 * save current master and slave interrupt mask
561 	 */
562 	pp = &pics0;
563 	sp->smask = pp->c_curmask[0];
564 	sp->mmask = pp->c_curmask[1];
565 
566 	/*
567 	 * save edge/level configuration for isa interrupts
568 	 */
569 	sp->elcr = 0;
570 	for (vecno = 0; vecno <= MAX_ISA_IRQ; vecno++)
571 		sp->elcr |= psm_get_elcr(vecno) << vecno;
572 }
573 
574 static void
575 pic_restore_state(struct pic_state *sp)
576 {
577 	int	vecno;
578 
579 	/* Restore master and slave interrupt masks */
580 	outb(SIMR_PORT, sp->smask);
581 	outb(MIMR_PORT, sp->mmask);
582 
583 	/* Read master to allow pics to settle */
584 	(void) inb(MIMR_PORT);
585 
586 	/* Restore edge/level configuration for isa interupts */
587 	for (vecno = 0; vecno <= MAX_ISA_IRQ; vecno++)
588 		psm_set_elcr(vecno, sp->elcr & (1 << vecno));
589 
590 	/* Reenter PIC mode before restoring LNK devices */
591 	(void) uppc_acpi_enter_picmode();
592 
593 	/* Restore ACPI link device mappings */
594 	acpi_restore_link_devices();
595 }
596 
597 static int
598 uppc_state(psm_state_request_t *rp)
599 {
600 	switch (rp->psr_cmd) {
601 	case PSM_STATE_ALLOC:
602 		rp->req.psm_state_req.psr_state =
603 		    kmem_zalloc(sizeof (struct pic_state), KM_NOSLEEP);
604 		if (rp->req.psm_state_req.psr_state == NULL)
605 			return (ENOMEM);
606 		rp->req.psm_state_req.psr_state_size =
607 		    sizeof (struct pic_state);
608 		return (0);
609 	case PSM_STATE_FREE:
610 		kmem_free(rp->req.psm_state_req.psr_state,
611 		    rp->req.psm_state_req.psr_state_size);
612 		return (0);
613 	case PSM_STATE_SAVE:
614 		pic_save_state(rp->req.psm_state_req.psr_state);
615 		return (0);
616 	case PSM_STATE_RESTORE:
617 		pic_restore_state(rp->req.psm_state_req.psr_state);
618 		return (0);
619 	default:
620 		return (EINVAL);
621 	}
622 }
623 
624 
625 static int
626 uppc_acpi_translate_pci_irq(dev_info_t *dip, int busid, int devid,
627     int ipin, int *pci_irqp, iflag_t *intr_flagp)
628 {
629 	int status;
630 	acpi_psm_lnk_t acpipsmlnk;
631 
632 	if ((status = acpi_get_irq_cache_ent(busid, devid, ipin, pci_irqp,
633 	    intr_flagp)) == ACPI_PSM_SUCCESS) {
634 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Found irqno %d "
635 		    "from cache for device %s, instance #%d\n", *pci_irqp,
636 		    ddi_get_name(dip), ddi_get_instance(dip)));
637 		return (status);
638 	}
639 
640 	bzero(&acpipsmlnk, sizeof (acpi_psm_lnk_t));
641 
642 	if ((status = acpi_translate_pci_irq(dip, ipin, pci_irqp,
643 	    intr_flagp, &acpipsmlnk)) == ACPI_PSM_FAILURE) {
644 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: "
645 		    " acpi_translate_pci_irq failed for device %s, instance"
646 		    " #%d\n", ddi_get_name(dip), ddi_get_instance(dip)));
647 
648 		return (status);
649 	}
650 
651 	if (status == ACPI_PSM_PARTIAL && acpipsmlnk.lnkobj != NULL) {
652 		status = uppc_acpi_irq_configure(&acpipsmlnk, dip, pci_irqp,
653 		    intr_flagp);
654 		if (status != ACPI_PSM_SUCCESS) {
655 			status = acpi_get_current_irq_resource(&acpipsmlnk,
656 			    pci_irqp, intr_flagp);
657 		}
658 	}
659 
660 	if (status == ACPI_PSM_SUCCESS) {
661 		acpi_new_irq_cache_ent(busid, devid, ipin, *pci_irqp,
662 		    intr_flagp, &acpipsmlnk);
663 		psm_set_elcr(*pci_irqp, 1);	/* set IRQ to PCI mode */
664 
665 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: [ACPI] "
666 		    "new irq %d for device %s, instance #%d\n",
667 		    *pci_irqp, ddi_get_name(dip), ddi_get_instance(dip)));
668 	}
669 
670 	return (status);
671 }
672 
673 /*
674  * Configures the irq for the interrupt link device identified by
675  * acpipsmlnkp.
676  *
677  * Gets the current and the list of possible irq settings for the
678  * device. If uppc_unconditional_srs is not set, and the current
679  * resource setting is in the list of possible irq settings,
680  * current irq resource setting is passed to the caller.
681  *
682  * Otherwise, picks an irq number from the list of possible irq
683  * settings, and sets the irq of the device to this value.
684  * If prefer_crs is set, among a set of irq numbers in the list that have
685  * the least number of devices sharing the interrupt, we pick current irq
686  * resource setting if it is a member of this set.
687  *
688  * Passes the irq number in the value pointed to by pci_irqp, and
689  * polarity and sensitivity in the structure pointed to by dipintrflagp
690  * to the caller.
691  *
692  * Note that if setting the irq resource failed, but successfuly obtained
693  * the current irq resource settings, passes the current irq resources
694  * and considers it a success.
695  *
696  * Returns:
697  * ACPI_PSM_SUCCESS on success.
698  *
699  * ACPI_PSM_FAILURE if an error occured during the configuration or
700  * if a suitable irq was not found for this device, or if setting the
701  * irq resource and obtaining the current resource fails.
702  *
703  */
704 static int
705 uppc_acpi_irq_configure(acpi_psm_lnk_t *acpipsmlnkp, dev_info_t *dip,
706     int *pci_irqp, iflag_t *dipintr_flagp)
707 {
708 	int i, min_share, foundnow, done = 0;
709 	int32_t irq;
710 	int32_t share_irq = -1;
711 	int32_t chosen_irq = -1;
712 	int cur_irq = -1;
713 	acpi_irqlist_t *irqlistp;
714 	acpi_irqlist_t *irqlistent;
715 
716 	if ((acpi_get_possible_irq_resources(acpipsmlnkp, &irqlistp))
717 	    == ACPI_PSM_FAILURE) {
718 		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: Unable to determine "
719 		    "or assign IRQ for device %s, instance #%d: The system was "
720 		    "unable to get the list of potential IRQs from ACPI.",
721 		    ddi_get_name(dip), ddi_get_instance(dip)));
722 
723 		return (ACPI_PSM_FAILURE);
724 	}
725 
726 	if ((acpi_get_current_irq_resource(acpipsmlnkp, &cur_irq,
727 	    dipintr_flagp) == ACPI_PSM_SUCCESS) && (!uppc_unconditional_srs) &&
728 	    (cur_irq > 0)) {
729 
730 		if (acpi_irqlist_find_irq(irqlistp, cur_irq, NULL)
731 		    == ACPI_PSM_SUCCESS) {
732 
733 			acpi_free_irqlist(irqlistp);
734 			ASSERT(pci_irqp != NULL);
735 			*pci_irqp = cur_irq;
736 			return (ACPI_PSM_SUCCESS);
737 		}
738 		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: Could not find the "
739 		    "current irq %d for device %s, instance #%d in ACPI's "
740 		    "list of possible irqs for this device. Picking one from "
741 		    " the latter list.", cur_irq, ddi_get_name(dip),
742 		    ddi_get_instance(dip)));
743 
744 	}
745 
746 	irqlistent = irqlistp;
747 	min_share = 255;
748 
749 	while (irqlistent != NULL) {
750 
751 		for (foundnow = 0, i = 0; i < irqlistent->num_irqs; i++) {
752 
753 			irq = irqlistp->irqs[i];
754 
755 			if ((irq > MAX_ISA_IRQ) ||
756 			    (irqlistent->intr_flags.intr_el == INTR_EL_EDGE) ||
757 			    (irq == 0))
758 				continue;
759 
760 			if (uppc_reserved_irqlist[irq])
761 				continue;
762 
763 			if (uppc_irq_shared_table[irq] == 0) {
764 				chosen_irq = irq;
765 				foundnow = 1;
766 				if (!(uppc_prefer_crs) || (irq == cur_irq)) {
767 					done = 1;
768 					break;
769 				}
770 			}
771 
772 			if ((uppc_irq_shared_table[irq] < min_share) ||
773 			    ((uppc_irq_shared_table[irq] == min_share) &&
774 			    (cur_irq == irq) && (uppc_prefer_crs))) {
775 				min_share = uppc_irq_shared_table[irq];
776 				share_irq = irq;
777 				foundnow = 1;
778 			}
779 		}
780 
781 		/* If we found an IRQ in the inner loop, save the details */
782 		if (foundnow && ((chosen_irq != -1) || (share_irq != -1))) {
783 			/*
784 			 * Copy the acpi_prs_private_t and flags from this
785 			 * irq list entry, since we found an irq from this
786 			 * entry.
787 			 */
788 			acpipsmlnkp->acpi_prs_prv = irqlistent->acpi_prs_prv;
789 			*dipintr_flagp = irqlistent->intr_flags;
790 		}
791 
792 		if (done)
793 			break;
794 
795 		/* Load the next entry in the irqlist */
796 		irqlistent = irqlistent->next;
797 	}
798 
799 	acpi_free_irqlist(irqlistp);
800 
801 	if (chosen_irq != -1)
802 		irq = chosen_irq;
803 	else if (share_irq != -1)
804 		irq = share_irq;
805 	else {
806 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Could not find a "
807 		    "suitable irq from the list of possible irqs for device "
808 		    "%s, instance #%d in ACPI's list of possible\n",
809 		    ddi_get_name(dip), ddi_get_instance(dip)));
810 
811 		return (ACPI_PSM_FAILURE);
812 	}
813 
814 
815 	UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Setting irq %d for device %s "
816 	    "instance #%d\n", irq, ddi_get_name(dip), ddi_get_instance(dip)));
817 
818 	if ((acpi_set_irq_resource(acpipsmlnkp, irq)) == ACPI_PSM_SUCCESS) {
819 		/*
820 		 * setting irq was successful, check to make sure CRS
821 		 * reflects that. If CRS does not agree with what we
822 		 * set, return the irq that was set.
823 		 */
824 
825 		if (acpi_get_current_irq_resource(acpipsmlnkp, &cur_irq,
826 		    dipintr_flagp) == ACPI_PSM_SUCCESS) {
827 
828 			if (cur_irq != irq)
829 				UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: "
830 				    "IRQ resource set (irqno %d) for device %s "
831 				    "instance #%d, differs from current "
832 				    "setting irqno %d",
833 				    irq, ddi_get_name(dip),
834 				    ddi_get_instance(dip), cur_irq));
835 		}
836 		/*
837 		 * return the irq that was set, and not what CRS reports,
838 		 * since CRS has been seen to be bogus on some systems
839 		 */
840 		cur_irq = irq;
841 	} else {
842 		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: set resource irq %d "
843 		    "failed for device %s instance #%d",
844 		    irq, ddi_get_name(dip), ddi_get_instance(dip)));
845 		if (cur_irq == -1)
846 			return (ACPI_PSM_FAILURE);
847 	}
848 
849 	ASSERT(pci_irqp != NULL);
850 	*pci_irqp = cur_irq;
851 	return (ACPI_PSM_SUCCESS);
852 }
853 
854 
855 /*ARGSUSED*/
856 static int
857 uppc_translate_irq(dev_info_t *dip, int irqno)
858 {
859 	char dev_type[16];
860 	int dev_len, pci_irq, devid, busid;
861 	ddi_acc_handle_t cfg_handle;
862 	uchar_t ipin, iline;
863 	iflag_t intr_flag;
864 
865 	if (dip == NULL) {
866 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: irqno = %d"
867 		    " dip = NULL\n", irqno));
868 		return (irqno);
869 	}
870 
871 	if (!uppc_enable_acpi) {
872 		return (irqno);
873 	}
874 
875 	dev_len = sizeof (dev_type);
876 	if (ddi_getlongprop_buf(DDI_DEV_T_ANY, ddi_get_parent(dip),
877 	    DDI_PROP_DONTPASS, "device_type", (caddr_t)dev_type,
878 	    &dev_len) != DDI_PROP_SUCCESS) {
879 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: irqno %d"
880 		    "device %s instance %d no device_type\n", irqno,
881 		    ddi_get_name(dip), ddi_get_instance(dip)));
882 		return (irqno);
883 	}
884 
885 	if ((strcmp(dev_type, "pci") == 0) ||
886 	    (strcmp(dev_type, "pciex") == 0)) {
887 
888 		/* pci device */
889 		if (acpica_get_bdf(dip, &busid, &devid, NULL) != 0)
890 			return (irqno);
891 
892 		if (pci_config_setup(dip, &cfg_handle) != DDI_SUCCESS)
893 			return (irqno);
894 
895 		ipin = pci_config_get8(cfg_handle, PCI_CONF_IPIN) - PCI_INTA;
896 		iline = pci_config_get8(cfg_handle, PCI_CONF_ILINE);
897 		if (uppc_acpi_translate_pci_irq(dip, busid, devid,
898 		    ipin, &pci_irq, &intr_flag) == ACPI_PSM_SUCCESS) {
899 
900 			UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: [ACPI] new irq "
901 			    "%d old irq %d device %s, instance %d\n", pci_irq,
902 			    irqno, ddi_get_name(dip), ddi_get_instance(dip)));
903 
904 			/*
905 			 * Make sure pci_irq is within range.
906 			 * Otherwise, fall through and return irqno.
907 			 */
908 			if (pci_irq <= MAX_ISA_IRQ) {
909 				if (iline != pci_irq) {
910 					/*
911 					 * Update the device's ILINE byte,
912 					 * in case uppc_acpi_translate_pci_irq
913 					 * has choosen a different pci_irq
914 					 * than the BIOS has configured.
915 					 * Some chipsets use the value in
916 					 * ILINE to control interrupt routing,
917 					 * in conflict with the PCI spec.
918 					 */
919 					pci_config_put8(cfg_handle,
920 					    PCI_CONF_ILINE, pci_irq);
921 				}
922 				pci_config_teardown(&cfg_handle);
923 				return (pci_irq);
924 			}
925 		}
926 		pci_config_teardown(&cfg_handle);
927 
928 		/* FALLTHRU to common case - returning irqno */
929 	} else {
930 		/* non-PCI; assumes ISA-style edge-triggered */
931 		psm_set_elcr(irqno, 0);		/* set IRQ to ISA mode */
932 
933 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: non-pci,"
934 		    "irqno %d device %s instance %d\n", irqno,
935 		    ddi_get_name(dip), ddi_get_instance(dip)));
936 	}
937 
938 	return (irqno);
939 }
940 
941 /*
942  * uppc_intr_enter() raises the ipl to the level of the current interrupt,
943  * and sends EOI to the pics.
944  * If interrupt is 7 or 15 and not spurious interrupt, send specific EOI
945  * else send non-specific EOI
946  * uppc_intr_enter() returns the new priority level,
947  * or -1 for spurious interrupt
948  */
949 static int
950 uppc_intr_enter(int ipl, int *vector)
951 {
952 	int newipl;
953 	int intno;
954 
955 	intno = (*vector);
956 
957 	ASSERT(intno < 256);
958 
959 	newipl = autovect[intno].avh_hi_pri;
960 
961 	/*
962 	 * During wait_till_seen() periods when interrupt vector is being
963 	 * removed in remove_av(), the removed hardware interrupt could
964 	 * trigger and got here with newipl 0.  It has to send EOI
965 	 * as usual but no need to call setspl and returns -1 like spurious.
966 	 */
967 	if ((intno & 7) != 7) {
968 		if (newipl)
969 			uppc_setspl(newipl);
970 		outb(MCMD_PORT, PIC_NSEOI);
971 		if (intno >= 8) {
972 			outb(SCMD_PORT, PIC_NSEOI);
973 		}
974 	} else { /* int was 7 or 15 */
975 		if (newipl && newipl <= ipl) { /* Check for spurious int */
976 			if (intno != 7)
977 				outb(MCMD_PORT, PIC_NSEOI);
978 			return (-1); /* Spurious int */
979 		} else {
980 			if (newipl)
981 				uppc_setspl(newipl);
982 			if (intno != 7) {
983 				outb(MCMD_PORT, PIC_NSEOI);
984 				outb(SCMD_PORT, PIC_SEOI_LVL7);
985 			} else  {
986 				outb(MCMD_PORT, PIC_SEOI_LVL7);
987 			}
988 		}
989 	}
990 
991 	if (newipl)
992 		return (newipl);
993 	else
994 		return (-1); /* not real spurious int */
995 }
996 
997 /*
998  * uppc_intr_exit() restores the old interrupt
999  * priority level after processing an interrupt.
1000  * It is called with interrupts disabled, and does not enable interrupts.
1001  */
1002 /* ARGSUSED */
1003 static void
1004 uppc_intr_exit(int ipl, int vector)
1005 {
1006 	uppc_setspl(ipl);
1007 }
1008 
1009 /*
1010  * uppc_setspl() loads new interrupt masks into the pics
1011  * based on input ipl.
1012  */
1013 /* ARGSUSED */
1014 static void
1015 uppc_setspl(int ipl)
1016 {
1017 	struct standard_pic *pp;
1018 	uint8_t smask, mmask;
1019 	uint8_t cursmask, curmmask;
1020 
1021 	pp = &pics0;
1022 	smask = pp->c_iplmask[ipl * 2];
1023 	mmask = pp->c_iplmask[ipl * 2 + 1];
1024 	cursmask = pp->c_curmask[0];
1025 	curmmask = pp->c_curmask[1];
1026 	if (cursmask == smask && curmmask == mmask)
1027 		return;
1028 	pp->c_curmask[0] = smask;
1029 	pp->c_curmask[1] = mmask;
1030 
1031 	if (cursmask != smask) {
1032 		/*
1033 		 * program new slave pic mask
1034 		 */
1035 		outb(SIMR_PORT, smask);
1036 	}
1037 	if (curmmask != mmask) {
1038 		/*
1039 		 * program new master pic mask
1040 		 */
1041 		outb(MIMR_PORT, mmask);
1042 	}
1043 	/*
1044 	 * read master to allow pics to settle
1045 	 */
1046 	(void) inb(MIMR_PORT);
1047 }
1048 
1049 /*
1050  * uppc_gethrtime() returns high resolution timer value
1051  */
1052 static hrtime_t
1053 uppc_gethrtime()
1054 {
1055 	hrtime_t timeval, temp;
1056 	unsigned int ctr0;
1057 	ulong_t oflags;
1058 
1059 	oflags = intr_clear(); /* disable ints */
1060 	lock_set(&uppc_gethrtime_lock);
1061 retry:
1062 	temp = hrtime_base;
1063 	outb(PITCTL_PORT, 0);	/* latch counter 0 */
1064 	/*
1065 	 * read counter 0
1066 	 */
1067 	ctr0 = inb(PITCTR0_PORT);
1068 	ctr0 |= inb(PITCTR0_PORT) << 8;
1069 	timeval = (hrtime_t)ctr0 * (NANOSEC / PIT_HZ);
1070 	if (temp != hrtime_base)
1071 		goto retry;
1072 	timeval -= temp;
1073 	if (timeval < uppc_lasthrtime)
1074 		timeval = uppc_lasthrtime;
1075 	uppc_lasthrtime = timeval;
1076 	lock_clear(&uppc_gethrtime_lock);
1077 	intr_restore(oflags);
1078 	return (timeval);
1079 }
1080