1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved. 23 * Copyright 2016 Nexenta Systems, Inc. 24 * Copyright (c) 2017 by Delphix. All rights reserved. 25 * Copyright 2020 Joyent, Inc. 26 * Copyright 2020 RackTop Systems, Inc. 27 * Copyright 2020 Oxide Computer Company 28 */ 29 /* 30 * Copyright (c) 2010, Intel Corporation. 31 * All rights reserved. 32 */ 33 34 /* 35 * PSMI 1.1 extensions are supported only in 2.6 and later versions. 36 * PSMI 1.2 extensions are supported only in 2.7 and later versions. 37 * PSMI 1.3 and 1.4 extensions are supported in Solaris 10. 38 * PSMI 1.5 extensions are supported in Solaris Nevada. 39 * PSMI 1.6 extensions are supported in Solaris Nevada. 40 * PSMI 1.7 extensions are supported in Solaris Nevada. 41 */ 42 #define PSMI_1_7 43 44 #include <sys/processor.h> 45 #include <sys/time.h> 46 #include <sys/psm.h> 47 #include <sys/smp_impldefs.h> 48 #include <sys/cram.h> 49 #include <sys/acpi/acpi.h> 50 #include <sys/acpica.h> 51 #include <sys/psm_common.h> 52 #include <sys/apic.h> 53 #include <sys/apic_timer.h> 54 #include <sys/pit.h> 55 #include <sys/ddi.h> 56 #include <sys/sunddi.h> 57 #include <sys/ddi_impldefs.h> 58 #include <sys/pci.h> 59 #include <sys/promif.h> 60 #include <sys/x86_archext.h> 61 #include <sys/cpc_impl.h> 62 #include <sys/uadmin.h> 63 #include <sys/panic.h> 64 #include <sys/debug.h> 65 #include <sys/archsystm.h> 66 #include <sys/trap.h> 67 #include <sys/machsystm.h> 68 #include <sys/cpuvar.h> 69 #include <sys/rm_platter.h> 70 #include <sys/privregs.h> 71 #include <sys/cyclic.h> 72 #include <sys/note.h> 73 #include <sys/pci_intr_lib.h> 74 #include <sys/sunndi.h> 75 #include <sys/prom_debug.h> 76 #if !defined(__xpv) 77 #include <sys/hpet.h> 78 #include <sys/clock.h> 79 #endif 80 81 /* 82 * Local Function Prototypes 83 */ 84 static int apic_handle_defconf(void); 85 static int apic_parse_mpct(caddr_t mpct, int bypass); 86 static struct apic_mpfps_hdr *apic_find_fps_sig(caddr_t fptr, int size); 87 static int apic_checksum(caddr_t bptr, int len); 88 static int apic_find_bus_type(char *bus); 89 static int apic_find_bus(int busid); 90 static struct apic_io_intr *apic_find_io_intr(int irqno); 91 static int apic_find_free_irq(int start, int end); 92 struct apic_io_intr *apic_find_io_intr_w_busid(int irqno, int busid); 93 static void apic_set_pwroff_method_from_mpcnfhdr(struct apic_mp_cnf_hdr *hdrp); 94 static void apic_free_apic_cpus(void); 95 static boolean_t apic_is_ioapic_AMD_813x(uint32_t physaddr); 96 static int apic_acpi_enter_apicmode(void); 97 98 int apic_handle_pci_pci_bridge(dev_info_t *idip, int child_devno, 99 int child_ipin, struct apic_io_intr **intrp); 100 int apic_find_bus_id(int bustype); 101 int apic_find_intin(uchar_t ioapic, uchar_t intin); 102 void apic_record_rdt_entry(apic_irq_t *irqptr, int irq); 103 104 int apic_debug_mps_id = 0; /* 1 - print MPS ID strings */ 105 106 /* ACPI SCI interrupt configuration; -1 if SCI not used */ 107 int apic_sci_vect = -1; 108 iflag_t apic_sci_flags; 109 110 #if !defined(__xpv) 111 /* ACPI HPET interrupt configuration; -1 if HPET not used */ 112 int apic_hpet_vect = -1; 113 iflag_t apic_hpet_flags; 114 #endif 115 116 /* 117 * psm name pointer 118 */ 119 char *psm_name; 120 121 /* ACPI support routines */ 122 static int acpi_probe(char *); 123 static int apic_acpi_irq_configure(acpi_psm_lnk_t *acpipsmlnkp, dev_info_t *dip, 124 int *pci_irqp, iflag_t *intr_flagp); 125 126 int apic_acpi_translate_pci_irq(dev_info_t *dip, int busid, int devid, 127 int ipin, int *pci_irqp, iflag_t *intr_flagp); 128 uchar_t acpi_find_ioapic(int irq); 129 static int acpi_intr_compatible(iflag_t iflag1, iflag_t iflag2); 130 131 /* Max wait time (in repetitions) for flags to clear in an RDT entry. */ 132 int apic_max_reps_clear_pending = 1000; 133 134 int apic_intr_policy = INTR_ROUND_ROBIN; 135 136 int apic_next_bind_cpu = 1; /* For round robin assignment */ 137 /* start with cpu 1 */ 138 139 /* 140 * If enabled, the distribution works as follows: 141 * On every interrupt entry, the current ipl for the CPU is set in cpu_info 142 * and the irq corresponding to the ipl is also set in the aci_current array. 143 * interrupt exit and setspl (due to soft interrupts) will cause the current 144 * ipl to be be changed. This is cache friendly as these frequently used 145 * paths write into a per cpu structure. 146 * 147 * Sampling is done by checking the structures for all CPUs and incrementing 148 * the busy field of the irq (if any) executing on each CPU and the busy field 149 * of the corresponding CPU. 150 * In periodic mode this is done on every clock interrupt. 151 * In one-shot mode, this is done thru a cyclic with an interval of 152 * apic_redistribute_sample_interval (default 10 milli sec). 153 * 154 * Every apic_sample_factor_redistribution times we sample, we do computations 155 * to decide which interrupt needs to be migrated (see comments 156 * before apic_intr_redistribute(). 157 */ 158 159 /* 160 * Following 3 variables start as % and can be patched or set using an 161 * API to be defined in future. They will be scaled to 162 * sample_factor_redistribution which is in turn set to hertz+1 (in periodic 163 * mode), or 101 in one-shot mode to stagger it away from one sec processing 164 */ 165 166 int apic_int_busy_mark = 60; 167 int apic_int_free_mark = 20; 168 int apic_diff_for_redistribution = 10; 169 170 /* sampling interval for interrupt redistribution for dynamic migration */ 171 int apic_redistribute_sample_interval = NANOSEC / 100; /* 10 millisec */ 172 173 /* 174 * number of times we sample before deciding to redistribute interrupts 175 * for dynamic migration 176 */ 177 int apic_sample_factor_redistribution = 101; 178 179 int apic_redist_cpu_skip = 0; 180 int apic_num_imbalance = 0; 181 int apic_num_rebind = 0; 182 183 /* 184 * Maximum number of APIC CPUs in the system, -1 indicates that dynamic 185 * allocation of CPU ids is disabled. 186 */ 187 int apic_max_nproc = -1; 188 int apic_nproc = 0; 189 size_t apic_cpus_size = 0; 190 int apic_defconf = 0; 191 int apic_irq_translate = 0; 192 int apic_spec_rev = 0; 193 int apic_imcrp = 0; 194 195 int apic_use_acpi = 1; /* 1 = use ACPI, 0 = don't use ACPI */ 196 int apic_use_acpi_madt_only = 0; /* 1=ONLY use MADT from ACPI */ 197 198 /* 199 * For interrupt link devices, if apic_unconditional_srs is set, an irq resource 200 * will be assigned (via _SRS). If it is not set, use the current 201 * irq setting (via _CRS), but only if that irq is in the set of possible 202 * irqs (returned by _PRS) for the device. 203 */ 204 int apic_unconditional_srs = 1; 205 206 /* 207 * For interrupt link devices, if apic_prefer_crs is set when we are 208 * assigning an IRQ resource to a device, prefer the current IRQ setting 209 * over other possible irq settings under same conditions. 210 */ 211 212 int apic_prefer_crs = 1; 213 214 uchar_t apic_io_id[MAX_IO_APIC]; 215 volatile uint32_t *apicioadr[MAX_IO_APIC]; 216 uchar_t apic_io_ver[MAX_IO_APIC]; 217 uchar_t apic_io_vectbase[MAX_IO_APIC]; 218 uchar_t apic_io_vectend[MAX_IO_APIC]; 219 uchar_t apic_reserved_irqlist[MAX_ISA_IRQ + 1]; 220 uint32_t apic_physaddr[MAX_IO_APIC]; 221 222 boolean_t ioapic_mask_workaround[MAX_IO_APIC]; 223 224 /* 225 * First available slot to be used as IRQ index into the apic_irq_table 226 * for those interrupts (like MSI/X) that don't have a physical IRQ. 227 */ 228 int apic_first_avail_irq = APIC_FIRST_FREE_IRQ; 229 230 /* 231 * apic_ioapic_lock protects the ioapics (reg select), the status, temp_bound 232 * and bound elements of cpus_info and the temp_cpu element of irq_struct 233 */ 234 lock_t apic_ioapic_lock; 235 236 int apic_io_max = 0; /* no. of i/o apics enabled */ 237 238 struct apic_io_intr *apic_io_intrp = NULL; 239 static struct apic_bus *apic_busp; 240 241 uchar_t apic_resv_vector[MAXIPL+1]; 242 243 char apic_level_intr[APIC_MAX_VECTOR+1]; 244 245 uint32_t eisa_level_intr_mask = 0; 246 /* At least MSB will be set if EISA bus */ 247 248 int apic_pci_bus_total = 0; 249 uchar_t apic_single_pci_busid = 0; 250 251 /* 252 * airq_mutex protects additions to the apic_irq_table - the first 253 * pointer and any airq_nexts off of that one. It also protects 254 * apic_max_device_irq & apic_min_device_irq. It also guarantees 255 * that share_id is unique as new ids are generated only when new 256 * irq_t structs are linked in. Once linked in the structs are never 257 * deleted. temp_cpu & mps_intr_index field indicate if it is programmed 258 * or allocated. Note that there is a slight gap between allocating in 259 * apic_introp_xlate and programming in addspl. 260 */ 261 kmutex_t airq_mutex; 262 apic_irq_t *apic_irq_table[APIC_MAX_VECTOR+1]; 263 int apic_max_device_irq = 0; 264 int apic_min_device_irq = APIC_MAX_VECTOR; 265 266 typedef struct prs_irq_list_ent { 267 int list_prio; 268 int32_t irq; 269 iflag_t intrflags; 270 acpi_prs_private_t prsprv; 271 struct prs_irq_list_ent *next; 272 } prs_irq_list_t; 273 274 275 /* 276 * ACPI variables 277 */ 278 /* 1 = acpi is enabled & working, 0 = acpi is not enabled or not there */ 279 int apic_enable_acpi = 0; 280 281 /* ACPI Multiple APIC Description Table ptr */ 282 static ACPI_TABLE_MADT *acpi_mapic_dtp = NULL; 283 284 /* ACPI Interrupt Source Override Structure ptr */ 285 ACPI_MADT_INTERRUPT_OVERRIDE *acpi_isop = NULL; 286 int acpi_iso_cnt = 0; 287 288 /* ACPI Non-maskable Interrupt Sources ptr */ 289 static ACPI_MADT_NMI_SOURCE *acpi_nmi_sp = NULL; 290 static int acpi_nmi_scnt = 0; 291 static ACPI_MADT_LOCAL_APIC_NMI *acpi_nmi_cp = NULL; 292 static int acpi_nmi_ccnt = 0; 293 294 static boolean_t acpi_found_smp_config = B_FALSE; 295 296 /* 297 * The following added to identify a software poweroff method if available. 298 */ 299 300 static struct { 301 int poweroff_method; 302 char oem_id[APIC_MPS_OEM_ID_LEN + 1]; /* MAX + 1 for NULL */ 303 char prod_id[APIC_MPS_PROD_ID_LEN + 1]; /* MAX + 1 for NULL */ 304 } apic_mps_ids[] = { 305 { APIC_POWEROFF_VIA_RTC, "INTEL", "ALDER" }, /* 4300 */ 306 { APIC_POWEROFF_VIA_RTC, "NCR", "AMC" }, /* 4300 */ 307 { APIC_POWEROFF_VIA_ASPEN_BMC, "INTEL", "A450NX" }, /* 4400? */ 308 { APIC_POWEROFF_VIA_ASPEN_BMC, "INTEL", "AD450NX" }, /* 4400 */ 309 { APIC_POWEROFF_VIA_ASPEN_BMC, "INTEL", "AC450NX" }, /* 4400R */ 310 { APIC_POWEROFF_VIA_SITKA_BMC, "INTEL", "S450NX" }, /* S50 */ 311 { APIC_POWEROFF_VIA_SITKA_BMC, "INTEL", "SC450NX" } /* S50? */ 312 }; 313 314 int apic_poweroff_method = APIC_POWEROFF_NONE; 315 316 /* 317 * Auto-configuration routines 318 */ 319 320 /* 321 * Look at MPSpec 1.4 (Intel Order # 242016-005) for details of what we do here 322 * May work with 1.1 - but not guaranteed. 323 * According to the MP Spec, the MP floating pointer structure 324 * will be searched in the order described below: 325 * 1. In the first kilobyte of Extended BIOS Data Area (EBDA) 326 * 2. Within the last kilobyte of system base memory 327 * 3. In the BIOS ROM address space between 0F0000h and 0FFFFh 328 * Once we find the right signature with proper checksum, we call 329 * either handle_defconf or parse_mpct to get all info necessary for 330 * subsequent operations. 331 */ 332 int 333 apic_probe_common(char *modname) 334 { 335 uint32_t mpct_addr, ebda_start = 0, base_mem_end; 336 caddr_t biosdatap; 337 caddr_t mpct = NULL; 338 caddr_t fptr = NULL; 339 int i, mpct_size = 0, mapsize, retval = PSM_FAILURE; 340 ushort_t ebda_seg, base_mem_size; 341 struct apic_mpfps_hdr *fpsp; 342 struct apic_mp_cnf_hdr *hdrp; 343 int bypass_cpu_and_ioapics_in_mptables; 344 int acpi_user_options; 345 346 PRM_POINT("apic_probe_common()"); 347 348 if (apic_forceload < 0) 349 return (retval); 350 351 /* 352 * Remember who we are 353 */ 354 psm_name = modname; 355 356 /* Allow override for MADT-only mode */ 357 acpi_user_options = ddi_prop_get_int(DDI_DEV_T_ANY, ddi_root_node(), 0, 358 "acpi-user-options", 0); 359 apic_use_acpi_madt_only = ((acpi_user_options & ACPI_OUSER_MADT) != 0); 360 361 /* Allow apic_use_acpi to override MADT-only mode */ 362 if (!apic_use_acpi) 363 apic_use_acpi_madt_only = 0; 364 365 PRM_POINT("acpi_probe()"); 366 retval = acpi_probe(modname); 367 PRM_DEBUG(retval); 368 369 /* in UEFI system, there is no BIOS data */ 370 if (ddi_prop_exists(DDI_DEV_T_ANY, ddi_root_node(), 0, "efi-systab")) { 371 PRM_POINT("UEFI system!"); 372 goto apic_ret; 373 } 374 375 /* 376 * mapin the bios data area 40:0 377 * 40:13h - two-byte location reports the base memory size 378 * 40:0Eh - two-byte location for the exact starting address of 379 * the EBDA segment for EISA 380 */ 381 PRM_POINT("psm_map_phys()"); 382 biosdatap = psm_map_phys(0x400, 0x20, PROT_READ); 383 PRM_DEBUG(biosdatap); 384 if (!biosdatap) 385 goto apic_ret; 386 fpsp = (struct apic_mpfps_hdr *)NULL; 387 mapsize = MPFPS_RAM_WIN_LEN; 388 /*LINTED: pointer cast may result in improper alignment */ 389 ebda_seg = *((ushort_t *)(biosdatap+0xe)); 390 PRM_DEBUG(ebda_seg); 391 /* check the 1k of EBDA */ 392 if (ebda_seg) { 393 ebda_start = ((uint32_t)ebda_seg) << 4; 394 fptr = psm_map_phys(ebda_start, MPFPS_RAM_WIN_LEN, PROT_READ); 395 PRM_DEBUG(fptr); 396 if (fptr) { 397 if (!(fpsp = 398 apic_find_fps_sig(fptr, MPFPS_RAM_WIN_LEN))) 399 psm_unmap_phys(fptr, MPFPS_RAM_WIN_LEN); 400 } 401 } 402 /* If not in EBDA, check the last k of system base memory */ 403 PRM_DEBUG(fpsp); 404 if (!fpsp) { 405 /*LINTED: pointer cast may result in improper alignment */ 406 base_mem_size = *((ushort_t *)(biosdatap + 0x13)); 407 408 if (base_mem_size > 512) 409 base_mem_end = 639 * 1024; 410 else 411 base_mem_end = 511 * 1024; 412 /* if ebda == last k of base mem, skip to check BIOS ROM */ 413 if (base_mem_end != ebda_start) { 414 415 fptr = psm_map_phys(base_mem_end, MPFPS_RAM_WIN_LEN, 416 PROT_READ); 417 PRM_DEBUG(fptr); 418 419 if (fptr) { 420 if (!(fpsp = apic_find_fps_sig(fptr, 421 MPFPS_RAM_WIN_LEN))) 422 psm_unmap_phys(fptr, MPFPS_RAM_WIN_LEN); 423 } 424 } 425 } 426 PRM_POINT("psm_unmap_phys()"); 427 psm_unmap_phys(biosdatap, 0x20); 428 429 /* If still cannot find it, check the BIOS ROM space */ 430 PRM_DEBUG(fpsp); 431 if (!fpsp) { 432 mapsize = MPFPS_ROM_WIN_LEN; 433 fptr = psm_map_phys(MPFPS_ROM_WIN_START, 434 MPFPS_ROM_WIN_LEN, PROT_READ); 435 PRM_DEBUG(fptr); 436 if (fptr) { 437 if (!(fpsp = 438 apic_find_fps_sig(fptr, MPFPS_ROM_WIN_LEN))) { 439 psm_unmap_phys(fptr, MPFPS_ROM_WIN_LEN); 440 goto apic_ret; 441 } 442 } 443 } 444 445 PRM_DEBUG(fptr); 446 PRM_DEBUG(fpsp); 447 PRM_POINT("apic_checksum()"); 448 if (apic_checksum((caddr_t)fpsp, fpsp->mpfps_length * 16) != 0) { 449 PRM_POINT("psm_unmap_phys()"); 450 psm_unmap_phys(fptr, MPFPS_ROM_WIN_LEN); 451 goto apic_ret; 452 } 453 454 apic_spec_rev = fpsp->mpfps_spec_rev; 455 if ((apic_spec_rev != 04) && (apic_spec_rev != 01)) { 456 PRM_POINT("psm_unmap_phys()"); 457 psm_unmap_phys(fptr, MPFPS_ROM_WIN_LEN); 458 goto apic_ret; 459 } 460 461 /* check IMCR is present or not */ 462 apic_imcrp = fpsp->mpfps_featinfo2 & MPFPS_FEATINFO2_IMCRP; 463 464 /* check default configuration (dual CPUs) */ 465 if ((apic_defconf = fpsp->mpfps_featinfo1) != 0) { 466 PRM_POINT("psm_unmap_phys()"); 467 psm_unmap_phys(fptr, mapsize); 468 PRM_POINT("apic_handle_defconf()"); 469 if ((retval = apic_handle_defconf()) != PSM_SUCCESS) 470 return (retval); 471 472 goto apic_ret; 473 } 474 475 /* MP Configuration Table */ 476 mpct_addr = (uint32_t)(fpsp->mpfps_mpct_paddr); 477 PRM_DEBUG(mpct_addr); 478 479 psm_unmap_phys(fptr, mapsize); /* unmap floating ptr struct */ 480 481 /* 482 * Map in enough memory for the MP Configuration Table Header. 483 * Use this table to read the total length of the BIOS data and 484 * map in all the info 485 */ 486 /*LINTED: pointer cast may result in improper alignment */ 487 hdrp = (struct apic_mp_cnf_hdr *)psm_map_phys(mpct_addr, 488 sizeof (struct apic_mp_cnf_hdr), PROT_READ); 489 if (!hdrp) 490 goto apic_ret; 491 492 /* check mp configuration table signature PCMP */ 493 if (hdrp->mpcnf_sig != 0x504d4350) { 494 psm_unmap_phys((caddr_t)hdrp, sizeof (struct apic_mp_cnf_hdr)); 495 goto apic_ret; 496 } 497 mpct_size = (int)hdrp->mpcnf_tbl_length; 498 499 PRM_POINT("apic_set_pwroff_method_from_mpcnfhdr()"); 500 apic_set_pwroff_method_from_mpcnfhdr(hdrp); 501 502 psm_unmap_phys((caddr_t)hdrp, sizeof (struct apic_mp_cnf_hdr)); 503 504 if ((retval == PSM_SUCCESS) && !apic_use_acpi_madt_only) { 505 /* This is an ACPI machine No need for further checks */ 506 goto apic_ret; 507 } 508 509 /* 510 * Map in the entries for this machine, ie. Processor 511 * Entry Tables, Bus Entry Tables, etc. 512 * They are in fixed order following one another 513 */ 514 mpct = psm_map_phys(mpct_addr, mpct_size, PROT_READ); 515 if (!mpct) 516 goto apic_ret; 517 518 if (apic_checksum(mpct, mpct_size) != 0) 519 goto apic_fail1; 520 521 /*LINTED: pointer cast may result in improper alignment */ 522 hdrp = (struct apic_mp_cnf_hdr *)mpct; 523 apicadr = (uint32_t *)mapin_apic((uint32_t)hdrp->mpcnf_local_apic, 524 APIC_LOCAL_MEMLEN, PROT_READ | PROT_WRITE); 525 PRM_DEBUG(hdrp); 526 PRM_DEBUG(apicadr); 527 if (!apicadr) 528 goto apic_fail1; 529 530 /* Parse all information in the tables */ 531 bypass_cpu_and_ioapics_in_mptables = (retval == PSM_SUCCESS); 532 if (apic_parse_mpct(mpct, bypass_cpu_and_ioapics_in_mptables) == 533 PSM_SUCCESS) { 534 retval = PSM_SUCCESS; 535 goto apic_ret; 536 } 537 538 apic_fail1: 539 PRM_POINT("apic_fail1:"); 540 psm_unmap_phys(mpct, mpct_size); 541 mpct = NULL; 542 543 apic_ret: 544 PRM_POINT("apic_ret:"); 545 if (retval == PSM_SUCCESS) { 546 extern int apic_ioapic_method_probe(); 547 548 PRM_POINT("apic_ioapic_method_probe()"); 549 if ((retval = apic_ioapic_method_probe()) == PSM_SUCCESS) { 550 PRM_POINT("SUCCESS"); 551 return (PSM_SUCCESS); 552 } 553 } 554 555 for (i = 0; i < apic_io_max; i++) 556 mapout_ioapic((caddr_t)apicioadr[i], APIC_IO_MEMLEN); 557 if (apic_cpus) { 558 kmem_free(apic_cpus, apic_cpus_size); 559 apic_cpus = NULL; 560 } 561 if (apicadr) { 562 mapout_apic((caddr_t)apicadr, APIC_LOCAL_MEMLEN); 563 apicadr = NULL; 564 } 565 if (mpct) 566 psm_unmap_phys(mpct, mpct_size); 567 568 PRM_DEBUG(retval); 569 return (retval); 570 } 571 572 static void 573 apic_set_pwroff_method_from_mpcnfhdr(struct apic_mp_cnf_hdr *hdrp) 574 { 575 int i; 576 577 for (i = 0; i < (sizeof (apic_mps_ids) / sizeof (apic_mps_ids[0])); 578 i++) { 579 if ((strncmp(hdrp->mpcnf_oem_str, apic_mps_ids[i].oem_id, 580 strlen(apic_mps_ids[i].oem_id)) == 0) && 581 (strncmp(hdrp->mpcnf_prod_str, apic_mps_ids[i].prod_id, 582 strlen(apic_mps_ids[i].prod_id)) == 0)) { 583 584 apic_poweroff_method = apic_mps_ids[i].poweroff_method; 585 break; 586 } 587 } 588 589 if (apic_debug_mps_id != 0) { 590 cmn_err(CE_CONT, "%s: MPS OEM ID = '%c%c%c%c%c%c%c%c'" 591 "Product ID = '%c%c%c%c%c%c%c%c%c%c%c%c'\n", 592 psm_name, 593 hdrp->mpcnf_oem_str[0], 594 hdrp->mpcnf_oem_str[1], 595 hdrp->mpcnf_oem_str[2], 596 hdrp->mpcnf_oem_str[3], 597 hdrp->mpcnf_oem_str[4], 598 hdrp->mpcnf_oem_str[5], 599 hdrp->mpcnf_oem_str[6], 600 hdrp->mpcnf_oem_str[7], 601 hdrp->mpcnf_prod_str[0], 602 hdrp->mpcnf_prod_str[1], 603 hdrp->mpcnf_prod_str[2], 604 hdrp->mpcnf_prod_str[3], 605 hdrp->mpcnf_prod_str[4], 606 hdrp->mpcnf_prod_str[5], 607 hdrp->mpcnf_prod_str[6], 608 hdrp->mpcnf_prod_str[7], 609 hdrp->mpcnf_prod_str[8], 610 hdrp->mpcnf_prod_str[9], 611 hdrp->mpcnf_prod_str[10], 612 hdrp->mpcnf_prod_str[11]); 613 } 614 } 615 616 static void 617 apic_free_apic_cpus(void) 618 { 619 if (apic_cpus != NULL) { 620 kmem_free(apic_cpus, apic_cpus_size); 621 apic_cpus = NULL; 622 apic_cpus_size = 0; 623 } 624 } 625 626 static uint32_t 627 acpi_get_apic_lid(void) 628 { 629 uint32_t id; 630 631 id = apic_reg_ops->apic_read(APIC_LID_REG); 632 if (apic_mode != LOCAL_X2APIC) 633 id >>= APIC_ID_BIT_OFFSET; 634 635 return (id); 636 } 637 638 static int 639 acpi_probe(char *modname) 640 { 641 int i, intmax; 642 uint32_t id, ver; 643 int acpi_verboseflags = 0; 644 int madt_seen, madt_size; 645 ACPI_SUBTABLE_HEADER *ap; 646 ACPI_MADT_LOCAL_APIC *mpa; 647 ACPI_MADT_LOCAL_X2APIC *mpx2a; 648 ACPI_MADT_IO_APIC *mia; 649 ACPI_MADT_IO_SAPIC *misa; 650 ACPI_MADT_INTERRUPT_OVERRIDE *mio; 651 ACPI_MADT_NMI_SOURCE *mns; 652 ACPI_MADT_INTERRUPT_SOURCE *mis; 653 ACPI_MADT_LOCAL_APIC_NMI *mlan; 654 ACPI_MADT_LOCAL_X2APIC_NMI *mx2alan; 655 ACPI_MADT_LOCAL_APIC_OVERRIDE *mao; 656 int sci; 657 iflag_t sci_flags; 658 volatile uint32_t *ioapic; 659 int ioapic_ix; 660 uint32_t *local_ids; 661 uint32_t *proc_ids; 662 uchar_t hid; 663 int warned = 0; 664 665 if (!apic_use_acpi) 666 return (PSM_FAILURE); 667 668 PRM_POINT("AcpiGetTable(MADT)"); 669 if (AcpiGetTable(ACPI_SIG_MADT, 1, 670 (ACPI_TABLE_HEADER **) &acpi_mapic_dtp) != AE_OK) { 671 cmn_err(CE_WARN, "!acpi_probe: No MADT found!"); 672 return (PSM_FAILURE); 673 } 674 675 PRM_DEBUG((uint32_t)acpi_mapic_dtp->Address); 676 PRM_POINT("mapin_apic()"); 677 apicadr = mapin_apic((uint32_t)acpi_mapic_dtp->Address, 678 APIC_LOCAL_MEMLEN, PROT_READ | PROT_WRITE); 679 if (!apicadr) 680 return (PSM_FAILURE); 681 682 if ((local_ids = (uint32_t *)kmem_zalloc(NCPU * sizeof (uint32_t), 683 KM_NOSLEEP)) == NULL) { 684 return (PSM_FAILURE); 685 } 686 687 if ((proc_ids = (uint32_t *)kmem_zalloc(NCPU * sizeof (uint32_t), 688 KM_NOSLEEP)) == NULL) { 689 kmem_free(local_ids, NCPU * sizeof (uint32_t)); 690 return (PSM_FAILURE); 691 } 692 693 PRM_POINT("acpi_get_apic_lid()"); 694 local_ids[0] = acpi_get_apic_lid(); 695 PRM_DEBUG(local_ids[0]); 696 697 apic_nproc = 1; 698 apic_io_max = 0; 699 700 ap = (ACPI_SUBTABLE_HEADER *) (acpi_mapic_dtp + 1); 701 madt_size = acpi_mapic_dtp->Header.Length; 702 madt_seen = sizeof (*acpi_mapic_dtp); 703 704 PRM_DEBUG(madt_size); 705 while (madt_seen < madt_size) { 706 switch (ap->Type) { 707 case ACPI_MADT_TYPE_LOCAL_APIC: 708 mpa = (ACPI_MADT_LOCAL_APIC *) ap; 709 if (mpa->LapicFlags & ACPI_MADT_ENABLED) { 710 if (mpa->Id == 255) { 711 cmn_err(CE_WARN, "!%s: encountered " 712 "invalid entry in MADT: CPU %d " 713 "has Local APIC Id equal to 255", 714 psm_name, mpa->ProcessorId); 715 } 716 if (mpa->Id == local_ids[0]) { 717 proc_ids[0] = mpa->ProcessorId; 718 } else if (apic_nproc < NCPU && use_mp && 719 apic_nproc < boot_ncpus) { 720 local_ids[apic_nproc] = mpa->Id; 721 proc_ids[apic_nproc] = mpa->ProcessorId; 722 apic_nproc++; 723 } else if (apic_nproc == NCPU && !warned) { 724 cmn_err(CE_WARN, "%s: CPU limit " 725 "exceeded; will use %d CPUs.", 726 psm_name, NCPU); 727 warned = 1; 728 } 729 } 730 break; 731 732 case ACPI_MADT_TYPE_IO_APIC: 733 mia = (ACPI_MADT_IO_APIC *) ap; 734 if (apic_io_max < MAX_IO_APIC) { 735 ioapic_ix = apic_io_max; 736 apic_io_id[apic_io_max] = mia->Id; 737 apic_io_vectbase[apic_io_max] = 738 mia->GlobalIrqBase; 739 apic_physaddr[apic_io_max] = 740 (uint32_t)mia->Address; 741 ioapic = apicioadr[apic_io_max] = 742 mapin_ioapic((uint32_t)mia->Address, 743 APIC_IO_MEMLEN, PROT_READ | PROT_WRITE); 744 if (!ioapic) 745 goto cleanup; 746 ioapic_mask_workaround[apic_io_max] = 747 apic_is_ioapic_AMD_813x(mia->Address); 748 apic_io_max++; 749 } 750 break; 751 752 case ACPI_MADT_TYPE_INTERRUPT_OVERRIDE: 753 mio = (ACPI_MADT_INTERRUPT_OVERRIDE *) ap; 754 if (acpi_isop == NULL) 755 acpi_isop = mio; 756 acpi_iso_cnt++; 757 break; 758 759 case ACPI_MADT_TYPE_NMI_SOURCE: 760 /* UNIMPLEMENTED */ 761 mns = (ACPI_MADT_NMI_SOURCE *) ap; 762 if (acpi_nmi_sp == NULL) 763 acpi_nmi_sp = mns; 764 acpi_nmi_scnt++; 765 766 cmn_err(CE_NOTE, "!apic: nmi source: %d 0x%x", 767 mns->GlobalIrq, mns->IntiFlags); 768 break; 769 770 case ACPI_MADT_TYPE_LOCAL_APIC_NMI: 771 /* UNIMPLEMENTED */ 772 mlan = (ACPI_MADT_LOCAL_APIC_NMI *) ap; 773 if (acpi_nmi_cp == NULL) 774 acpi_nmi_cp = mlan; 775 acpi_nmi_ccnt++; 776 777 cmn_err(CE_NOTE, "!apic: local nmi: %d 0x%x %d", 778 mlan->ProcessorId, mlan->IntiFlags, 779 mlan->Lint); 780 break; 781 782 case ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE: 783 /* UNIMPLEMENTED */ 784 mao = (ACPI_MADT_LOCAL_APIC_OVERRIDE *) ap; 785 cmn_err(CE_NOTE, "!apic: address override: %lx", 786 (long)mao->Address); 787 break; 788 789 case ACPI_MADT_TYPE_IO_SAPIC: 790 /* UNIMPLEMENTED */ 791 misa = (ACPI_MADT_IO_SAPIC *) ap; 792 793 cmn_err(CE_NOTE, "!apic: io sapic: %d %d %lx", 794 misa->Id, misa->GlobalIrqBase, 795 (long)misa->Address); 796 break; 797 798 case ACPI_MADT_TYPE_INTERRUPT_SOURCE: 799 /* UNIMPLEMENTED */ 800 mis = (ACPI_MADT_INTERRUPT_SOURCE *) ap; 801 802 cmn_err(CE_NOTE, 803 "!apic: irq source: %d %d %d 0x%x %d %d", 804 mis->Id, mis->Eid, mis->GlobalIrq, 805 mis->IntiFlags, mis->Type, 806 mis->IoSapicVector); 807 break; 808 809 case ACPI_MADT_TYPE_LOCAL_X2APIC: 810 mpx2a = (ACPI_MADT_LOCAL_X2APIC *) ap; 811 812 if (mpx2a->LapicFlags & ACPI_MADT_ENABLED) { 813 if (mpx2a->LocalApicId == local_ids[0]) { 814 proc_ids[0] = mpx2a->Uid; 815 } else if (apic_nproc < NCPU && use_mp && 816 apic_nproc < boot_ncpus) { 817 local_ids[apic_nproc] = 818 mpx2a->LocalApicId; 819 proc_ids[apic_nproc] = mpx2a->Uid; 820 apic_nproc++; 821 } else if (apic_nproc == NCPU && !warned) { 822 cmn_err(CE_WARN, "%s: CPU limit " 823 "exceeded; will use %d CPUs.", 824 psm_name, NCPU); 825 warned = 1; 826 } 827 } 828 829 break; 830 831 case ACPI_MADT_TYPE_LOCAL_X2APIC_NMI: 832 /* UNIMPLEMENTED */ 833 mx2alan = (ACPI_MADT_LOCAL_X2APIC_NMI *) ap; 834 if (mx2alan->Uid >> 8) 835 acpi_nmi_ccnt++; 836 837 #ifdef DEBUG 838 cmn_err(CE_NOTE, 839 "!apic: local x2apic nmi: %d 0x%x %d", 840 mx2alan->Uid, mx2alan->IntiFlags, mx2alan->Lint); 841 #endif 842 843 break; 844 845 case ACPI_MADT_TYPE_RESERVED: 846 default: 847 break; 848 } 849 850 /* advance to next entry */ 851 madt_seen += ap->Length; 852 ap = (ACPI_SUBTABLE_HEADER *)(((char *)ap) + ap->Length); 853 } 854 855 PRM_DEBUG(apic_nproc); 856 PRM_DEBUG(apic_io_max); 857 858 /* We found multiple enabled cpus via MADT */ 859 if ((apic_nproc > 1) && (apic_io_max > 0)) { 860 acpi_found_smp_config = B_TRUE; 861 cmn_err(CE_NOTE, 862 "!apic: Using ACPI (MADT) for SMP configuration"); 863 } 864 865 /* 866 * allocate enough space for possible hot-adding of CPUs. 867 * max_ncpus may be less than apic_nproc if it's set by user. 868 */ 869 if (plat_dr_support_cpu()) { 870 apic_max_nproc = max_ncpus; 871 } 872 PRM_DEBUG(apic_max_nproc); 873 apic_cpus_size = max(apic_nproc, max_ncpus) * sizeof (*apic_cpus); 874 if ((apic_cpus = kmem_zalloc(apic_cpus_size, KM_NOSLEEP)) == NULL) 875 goto cleanup; 876 877 /* 878 * ACPI doesn't provide the local apic ver, get it directly from the 879 * local apic 880 */ 881 PRM_POINT("apic_read(APIC_VERS_REG)"); 882 ver = apic_reg_ops->apic_read(APIC_VERS_REG); 883 PRM_DEBUG(ver); 884 PRM_DEBUG(apic_nproc); 885 PRM_DEBUG(boot_ncpus); 886 for (i = 0; i < apic_nproc; i++) { 887 apic_cpus[i].aci_local_id = local_ids[i]; 888 apic_cpus[i].aci_local_ver = (uchar_t)(ver & 0xFF); 889 apic_cpus[i].aci_processor_id = proc_ids[i]; 890 /* Only build mapping info for CPUs present at boot. */ 891 if (i < boot_ncpus) { 892 (void) acpica_map_cpu(i, proc_ids[i]); 893 } 894 } 895 PRM_POINT("acpica_map_cpu loop complete"); 896 897 /* 898 * To support CPU dynamic reconfiguration, the apic CPU info structure 899 * for each possible CPU will be pre-allocated at boot time. 900 * The state for each apic CPU info structure will be assigned according 901 * to the following rules: 902 * Rule 1: 903 * Slot index range: [0, min(apic_nproc, boot_ncpus)) 904 * State flags: 0 905 * Note: cpu exists and will be configured/enabled at boot time 906 * Rule 2: 907 * Slot index range: [boot_ncpus, apic_nproc) 908 * State flags: APIC_CPU_FREE | APIC_CPU_DIRTY 909 * Note: cpu exists but won't be configured/enabled at boot time 910 * Rule 3: 911 * Slot index range: [apic_nproc, boot_ncpus) 912 * State flags: APIC_CPU_FREE 913 * Note: cpu doesn't exist at boot time 914 * Rule 4: 915 * Slot index range: [max(apic_nproc, boot_ncpus), max_ncpus) 916 * State flags: APIC_CPU_FREE 917 * Note: cpu doesn't exist at boot time 918 */ 919 CPUSET_ZERO(apic_cpumask); 920 for (i = 0; i < min(boot_ncpus, apic_nproc); i++) { 921 CPUSET_ADD(apic_cpumask, i); 922 apic_cpus[i].aci_status = 0; 923 } 924 for (i = boot_ncpus; i < apic_nproc; i++) { 925 apic_cpus[i].aci_status = APIC_CPU_FREE | APIC_CPU_DIRTY; 926 } 927 for (i = apic_nproc; i < boot_ncpus; i++) { 928 apic_cpus[i].aci_status = APIC_CPU_FREE; 929 } 930 for (i = max(boot_ncpus, apic_nproc); i < max_ncpus; i++) { 931 apic_cpus[i].aci_status = APIC_CPU_FREE; 932 } 933 934 PRM_POINT("ioapic reads"); 935 for (i = 0; i < apic_io_max; i++) { 936 ioapic_ix = i; 937 PRM_DEBUG(ioapic_ix); 938 939 /* 940 * need to check Sitka on the following acpi problem 941 * On the Sitka, the ioapic's apic_id field isn't reporting 942 * the actual io apic id. We have reported this problem 943 * to Intel. Until they fix the problem, we will get the 944 * actual id directly from the ioapic. 945 */ 946 id = ioapic_read(ioapic_ix, APIC_ID_CMD); 947 PRM_DEBUG(id); 948 hid = (uchar_t)(id >> 24); 949 PRM_DEBUG(hid); 950 951 if (hid != apic_io_id[i]) { 952 if (apic_io_id[i] == 0) 953 apic_io_id[i] = hid; 954 else { /* set ioapic id to whatever reported by ACPI */ 955 id = ((uint32_t)apic_io_id[i]) << 24; 956 PRM_POINT("ioapic_write(ID)"); 957 ioapic_write(ioapic_ix, APIC_ID_CMD, id); 958 } 959 } 960 PRM_POINT("ioapic_read(VERS)"); 961 ver = ioapic_read(ioapic_ix, APIC_VERS_CMD); 962 apic_io_ver[i] = (uchar_t)(ver & 0xff); 963 intmax = (ver >> 16) & 0xff; 964 apic_io_vectend[i] = apic_io_vectbase[i] + intmax; 965 if (apic_first_avail_irq <= apic_io_vectend[i]) 966 apic_first_avail_irq = apic_io_vectend[i] + 1; 967 } 968 969 970 /* 971 * Process SCI configuration here 972 * An error may be returned here if 973 * acpi-user-options specifies legacy mode 974 * (no SCI, no ACPI mode) 975 */ 976 PRM_POINT("acpica_get_sci()"); 977 if (acpica_get_sci(&sci, &sci_flags) != AE_OK) 978 sci = -1; 979 980 /* 981 * Now call acpi_init() to generate namespaces 982 * If this fails, we don't attempt to use ACPI 983 * even if we were able to get a MADT above 984 */ 985 PRM_POINT("acpica_init()"); 986 if (acpica_init() != AE_OK) { 987 cmn_err(CE_WARN, "!apic: Failed to initialize acpica!"); 988 goto cleanup; 989 } 990 991 /* 992 * Call acpica_build_processor_map() now that we have 993 * ACPI namesspace access 994 */ 995 PRM_POINT("acpica_build_processor_map()"); 996 (void) acpica_build_processor_map(); 997 998 /* 999 * Squirrel away the SCI and flags for later on 1000 * in apic_picinit() when we're ready 1001 */ 1002 apic_sci_vect = sci; 1003 apic_sci_flags = sci_flags; 1004 1005 if (apic_verbose & APIC_VERBOSE_IRQ_FLAG) 1006 acpi_verboseflags |= PSM_VERBOSE_IRQ_FLAG; 1007 1008 if (apic_verbose & APIC_VERBOSE_POWEROFF_FLAG) 1009 acpi_verboseflags |= PSM_VERBOSE_POWEROFF_FLAG; 1010 1011 if (apic_verbose & APIC_VERBOSE_POWEROFF_PAUSE_FLAG) 1012 acpi_verboseflags |= PSM_VERBOSE_POWEROFF_PAUSE_FLAG; 1013 1014 PRM_POINT("acpi_psm_init()"); 1015 if (acpi_psm_init(modname, acpi_verboseflags) == ACPI_PSM_FAILURE) 1016 goto cleanup; 1017 1018 /* Enable ACPI APIC interrupt routing */ 1019 PRM_POINT("apic_acpi_enter_apicmode()"); 1020 if (apic_acpi_enter_apicmode() != PSM_FAILURE) { 1021 cmn_err(CE_NOTE, "!apic: Using APIC interrupt routing mode"); 1022 PRM_POINT("build_reserved_irqlist()"); 1023 build_reserved_irqlist((uchar_t *)apic_reserved_irqlist); 1024 apic_enable_acpi = 1; 1025 if (apic_sci_vect > 0) { 1026 PRM_POINT("acpica_set_core_feature()"); 1027 acpica_set_core_feature(ACPI_FEATURE_SCI_EVENT); 1028 } 1029 if (apic_use_acpi_madt_only) { 1030 cmn_err(CE_CONT, 1031 "?Using ACPI for CPU/IOAPIC information ONLY\n"); 1032 } 1033 1034 #if !defined(__xpv) 1035 /* 1036 * Probe ACPI for HPET information here which is used later in 1037 * apic_picinit(). Note that we do not need to use the HPET at 1038 * all on most modern systems, but if there is an actionable 1039 * failure message it will be logged by the routine itself. 1040 */ 1041 PRM_POINT("hpet_acpi_init()"); 1042 (void) hpet_acpi_init(&apic_hpet_vect, &apic_hpet_flags, 1043 apic_timer_stop_count, apic_timer_restart); 1044 #endif 1045 1046 kmem_free(local_ids, NCPU * sizeof (uint32_t)); 1047 kmem_free(proc_ids, NCPU * sizeof (uint32_t)); 1048 PRM_POINT("SUCCESS"); 1049 return (PSM_SUCCESS); 1050 } 1051 /* if setting APIC mode failed above, we fall through to cleanup */ 1052 1053 cleanup: 1054 cmn_err(CE_WARN, "!apic: Failed acpi_probe, SMP config was %s", 1055 acpi_found_smp_config ? "found" : "not found"); 1056 apic_free_apic_cpus(); 1057 if (apicadr != NULL) { 1058 mapout_apic((caddr_t)apicadr, APIC_LOCAL_MEMLEN); 1059 apicadr = NULL; 1060 } 1061 apic_max_nproc = -1; 1062 apic_nproc = 0; 1063 for (i = 0; i < apic_io_max; i++) { 1064 mapout_ioapic((caddr_t)apicioadr[i], APIC_IO_MEMLEN); 1065 apicioadr[i] = NULL; 1066 } 1067 apic_io_max = 0; 1068 acpi_isop = NULL; 1069 acpi_iso_cnt = 0; 1070 acpi_nmi_sp = NULL; 1071 acpi_nmi_scnt = 0; 1072 acpi_nmi_cp = NULL; 1073 acpi_nmi_ccnt = 0; 1074 acpi_found_smp_config = B_FALSE; 1075 kmem_free(local_ids, NCPU * sizeof (uint32_t)); 1076 kmem_free(proc_ids, NCPU * sizeof (uint32_t)); 1077 return (PSM_FAILURE); 1078 } 1079 1080 /* 1081 * Handle default configuration. Fill in reqd global variables & tables 1082 * Fill all details as MP table does not give any more info 1083 */ 1084 static int 1085 apic_handle_defconf(void) 1086 { 1087 /* Failed to probe ACPI MADT tables, disable CPU DR. */ 1088 apic_max_nproc = -1; 1089 apic_free_apic_cpus(); 1090 plat_dr_disable_cpu(); 1091 1092 apicioadr[0] = (void *)mapin_ioapic(APIC_IO_ADDR, 1093 APIC_IO_MEMLEN, PROT_READ | PROT_WRITE); 1094 apicadr = (void *)psm_map_phys(APIC_LOCAL_ADDR, 1095 APIC_LOCAL_MEMLEN, PROT_READ); 1096 apic_cpus_size = 2 * sizeof (*apic_cpus); 1097 apic_cpus = (apic_cpus_info_t *) 1098 kmem_zalloc(apic_cpus_size, KM_NOSLEEP); 1099 if ((!apicadr) || (!apicioadr[0]) || (!apic_cpus)) 1100 goto apic_handle_defconf_fail; 1101 CPUSET_ONLY(apic_cpumask, 0); 1102 CPUSET_ADD(apic_cpumask, 1); 1103 apic_nproc = 2; 1104 apic_cpus[0].aci_local_id = acpi_get_apic_lid(); 1105 /* 1106 * According to the PC+MP spec 1.1, the local ids 1107 * for the default configuration has to be 0 or 1 1108 */ 1109 if (apic_cpus[0].aci_local_id == 1) 1110 apic_cpus[1].aci_local_id = 0; 1111 else if (apic_cpus[0].aci_local_id == 0) 1112 apic_cpus[1].aci_local_id = 1; 1113 else 1114 goto apic_handle_defconf_fail; 1115 1116 apic_io_id[0] = 2; 1117 apic_io_max = 1; 1118 if (apic_defconf >= 5) { 1119 apic_cpus[0].aci_local_ver = APIC_INTEGRATED_VERS; 1120 apic_cpus[1].aci_local_ver = APIC_INTEGRATED_VERS; 1121 apic_io_ver[0] = APIC_INTEGRATED_VERS; 1122 } else { 1123 apic_cpus[0].aci_local_ver = 0; /* 82489 DX */ 1124 apic_cpus[1].aci_local_ver = 0; 1125 apic_io_ver[0] = 0; 1126 } 1127 if (apic_defconf == 2 || apic_defconf == 3 || apic_defconf == 6) 1128 eisa_level_intr_mask = (inb(EISA_LEVEL_CNTL + 1) << 8) | 1129 inb(EISA_LEVEL_CNTL) | ((uint_t)INT32_MAX + 1); 1130 return (PSM_SUCCESS); 1131 1132 apic_handle_defconf_fail: 1133 if (apicadr) 1134 mapout_apic((caddr_t)apicadr, APIC_LOCAL_MEMLEN); 1135 if (apicioadr[0]) 1136 mapout_ioapic((caddr_t)apicioadr[0], APIC_IO_MEMLEN); 1137 return (PSM_FAILURE); 1138 } 1139 1140 /* Parse the entries in MP configuration table and collect info that we need */ 1141 static int 1142 apic_parse_mpct(caddr_t mpct, int bypass_cpus_and_ioapics) 1143 { 1144 struct apic_procent *procp; 1145 struct apic_bus *busp; 1146 struct apic_io_entry *ioapicp; 1147 struct apic_io_intr *intrp; 1148 int ioapic_ix; 1149 uint32_t lid, id; 1150 uchar_t hid; 1151 int warned = 0; 1152 1153 /*LINTED: pointer cast may result in improper alignment */ 1154 procp = (struct apic_procent *)(mpct + sizeof (struct apic_mp_cnf_hdr)); 1155 1156 /* No need to count cpu entries if we won't use them */ 1157 if (!bypass_cpus_and_ioapics) { 1158 1159 /* Find max # of CPUS and allocate structure accordingly */ 1160 apic_nproc = 0; 1161 CPUSET_ZERO(apic_cpumask); 1162 while (procp->proc_entry == APIC_CPU_ENTRY) { 1163 if (procp->proc_cpuflags & CPUFLAGS_EN) { 1164 if (apic_nproc < NCPU && use_mp && 1165 apic_nproc < boot_ncpus) { 1166 CPUSET_ADD(apic_cpumask, apic_nproc); 1167 apic_nproc++; 1168 } else if (apic_nproc == NCPU && !warned) { 1169 cmn_err(CE_WARN, "%s: CPU limit " 1170 "exceeded; will use %d CPUs.", 1171 psm_name, NCPU); 1172 warned = 1; 1173 } 1174 1175 } 1176 procp++; 1177 } 1178 apic_cpus_size = apic_nproc * sizeof (*apic_cpus); 1179 if (!apic_nproc || !(apic_cpus = (apic_cpus_info_t *) 1180 kmem_zalloc(apic_cpus_size, KM_NOSLEEP))) 1181 return (PSM_FAILURE); 1182 } 1183 1184 /*LINTED: pointer cast may result in improper alignment */ 1185 procp = (struct apic_procent *)(mpct + sizeof (struct apic_mp_cnf_hdr)); 1186 1187 /* 1188 * start with index 1 as 0 needs to be filled in with Boot CPU, but 1189 * if we're bypassing this information, it has already been filled 1190 * in by acpi_probe(), so don't overwrite it. 1191 */ 1192 if (!bypass_cpus_and_ioapics) 1193 apic_nproc = 1; 1194 1195 while (procp->proc_entry == APIC_CPU_ENTRY) { 1196 /* check whether the cpu exists or not */ 1197 if (!bypass_cpus_and_ioapics && 1198 procp->proc_cpuflags & CPUFLAGS_EN) { 1199 if (procp->proc_cpuflags & CPUFLAGS_BP) { /* Boot CPU */ 1200 lid = acpi_get_apic_lid(); 1201 apic_cpus[0].aci_local_id = procp->proc_apicid; 1202 if (apic_cpus[0].aci_local_id != lid) { 1203 return (PSM_FAILURE); 1204 } 1205 apic_cpus[0].aci_local_ver = 1206 procp->proc_version; 1207 } else if (apic_nproc < NCPU && use_mp && 1208 apic_nproc < boot_ncpus) { 1209 apic_cpus[apic_nproc].aci_local_id = 1210 procp->proc_apicid; 1211 1212 apic_cpus[apic_nproc].aci_local_ver = 1213 procp->proc_version; 1214 apic_nproc++; 1215 1216 } 1217 } 1218 procp++; 1219 } 1220 1221 /* 1222 * Save start of bus entries for later use. 1223 * Get EISA level cntrl if EISA bus is present. 1224 * Also get the CPI bus id for single CPI bus case 1225 */ 1226 apic_busp = busp = (struct apic_bus *)procp; 1227 while (busp->bus_entry == APIC_BUS_ENTRY) { 1228 lid = apic_find_bus_type((char *)&busp->bus_str1); 1229 if (lid == BUS_EISA) { 1230 eisa_level_intr_mask = (inb(EISA_LEVEL_CNTL + 1) << 8) | 1231 inb(EISA_LEVEL_CNTL) | ((uint_t)INT32_MAX + 1); 1232 } else if (lid == BUS_PCI) { 1233 /* 1234 * apic_single_pci_busid will be used only if 1235 * apic_pic_bus_total is equal to 1 1236 */ 1237 apic_pci_bus_total++; 1238 apic_single_pci_busid = busp->bus_id; 1239 } 1240 busp++; 1241 } 1242 1243 ioapicp = (struct apic_io_entry *)busp; 1244 1245 if (!bypass_cpus_and_ioapics) 1246 apic_io_max = 0; 1247 do { 1248 if (!bypass_cpus_and_ioapics && apic_io_max < MAX_IO_APIC) { 1249 if (ioapicp->io_flags & IOAPIC_FLAGS_EN) { 1250 apic_io_id[apic_io_max] = ioapicp->io_apicid; 1251 apic_io_ver[apic_io_max] = ioapicp->io_version; 1252 apicioadr[apic_io_max] = 1253 (void *)mapin_ioapic( 1254 (uint32_t)ioapicp->io_apic_addr, 1255 APIC_IO_MEMLEN, PROT_READ | PROT_WRITE); 1256 1257 if (!apicioadr[apic_io_max]) 1258 return (PSM_FAILURE); 1259 1260 ioapic_mask_workaround[apic_io_max] = 1261 apic_is_ioapic_AMD_813x( 1262 ioapicp->io_apic_addr); 1263 1264 ioapic_ix = apic_io_max; 1265 id = ioapic_read(ioapic_ix, APIC_ID_CMD); 1266 hid = (uchar_t)(id >> 24); 1267 1268 if (hid != apic_io_id[apic_io_max]) { 1269 if (apic_io_id[apic_io_max] == 0) 1270 apic_io_id[apic_io_max] = hid; 1271 else { 1272 /* 1273 * set ioapic id to whatever 1274 * reported by MPS 1275 * 1276 * may not need to set index 1277 * again ??? 1278 * take it out and try 1279 */ 1280 1281 id = ((uint32_t) 1282 apic_io_id[apic_io_max]) << 1283 24; 1284 1285 ioapic_write(ioapic_ix, 1286 APIC_ID_CMD, id); 1287 } 1288 } 1289 apic_io_max++; 1290 } 1291 } 1292 ioapicp++; 1293 } while (ioapicp->io_entry == APIC_IO_ENTRY); 1294 1295 apic_io_intrp = (struct apic_io_intr *)ioapicp; 1296 1297 intrp = apic_io_intrp; 1298 while (intrp->intr_entry == APIC_IO_INTR_ENTRY) { 1299 if ((intrp->intr_irq > APIC_MAX_ISA_IRQ) || 1300 (apic_find_bus(intrp->intr_busid) == BUS_PCI)) { 1301 apic_irq_translate = 1; 1302 break; 1303 } 1304 intrp++; 1305 } 1306 1307 return (PSM_SUCCESS); 1308 } 1309 1310 boolean_t 1311 apic_cpu_in_range(int cpu) 1312 { 1313 cpu &= ~IRQ_USER_BOUND; 1314 /* Check whether cpu id is in valid range. */ 1315 if (cpu < 0 || cpu >= apic_nproc) { 1316 return (B_FALSE); 1317 } else if (apic_max_nproc != -1 && cpu >= apic_max_nproc) { 1318 /* 1319 * Check whether cpuid is in valid range if CPU DR is enabled. 1320 */ 1321 return (B_FALSE); 1322 } else if (!CPU_IN_SET(apic_cpumask, cpu)) { 1323 return (B_FALSE); 1324 } 1325 1326 return (B_TRUE); 1327 } 1328 1329 processorid_t 1330 apic_get_next_bind_cpu(void) 1331 { 1332 int i, count; 1333 processorid_t cpuid = 0; 1334 1335 for (count = 0; count < apic_nproc; count++) { 1336 if (apic_next_bind_cpu >= apic_nproc) { 1337 apic_next_bind_cpu = 0; 1338 } 1339 i = apic_next_bind_cpu++; 1340 if (apic_cpu_in_range(i)) { 1341 cpuid = i; 1342 break; 1343 } 1344 } 1345 1346 return (cpuid); 1347 } 1348 1349 uint16_t 1350 apic_get_apic_version() 1351 { 1352 int i; 1353 uchar_t min_io_apic_ver = 0; 1354 static uint16_t version; /* Cache as value is constant */ 1355 static boolean_t found = B_FALSE; /* Accomodate zero version */ 1356 1357 if (found == B_FALSE) { 1358 found = B_TRUE; 1359 1360 /* 1361 * Don't assume all IO APICs in the system are the same. 1362 * 1363 * Set to the minimum version. 1364 */ 1365 for (i = 0; i < apic_io_max; i++) { 1366 if ((apic_io_ver[i] != 0) && 1367 ((min_io_apic_ver == 0) || 1368 (min_io_apic_ver >= apic_io_ver[i]))) 1369 min_io_apic_ver = apic_io_ver[i]; 1370 } 1371 1372 /* Assume all local APICs are of the same version. */ 1373 version = (min_io_apic_ver << 8) | apic_cpus[0].aci_local_ver; 1374 } 1375 return (version); 1376 } 1377 1378 static struct apic_mpfps_hdr * 1379 apic_find_fps_sig(caddr_t cptr, int len) 1380 { 1381 int i; 1382 1383 /* Look for the pattern "_MP_" */ 1384 for (i = 0; i < len; i += 16) { 1385 if ((*(cptr+i) == '_') && 1386 (*(cptr+i+1) == 'M') && 1387 (*(cptr+i+2) == 'P') && 1388 (*(cptr+i+3) == '_')) 1389 /*LINTED: pointer cast may result in improper alignment */ 1390 return ((struct apic_mpfps_hdr *)(cptr + i)); 1391 } 1392 return (NULL); 1393 } 1394 1395 static int 1396 apic_checksum(caddr_t bptr, int len) 1397 { 1398 int i; 1399 uchar_t cksum; 1400 1401 cksum = 0; 1402 for (i = 0; i < len; i++) 1403 cksum += *bptr++; 1404 return ((int)cksum); 1405 } 1406 1407 /* 1408 * On machines with PCI-PCI bridges, a device behind a PCI-PCI bridge 1409 * needs special handling. We may need to chase up the device tree, 1410 * using the PCI-PCI Bridge specification's "rotating IPIN assumptions", 1411 * to find the IPIN at the root bus that relates to the IPIN on the 1412 * subsidiary bus (for ACPI or MP). We may, however, have an entry 1413 * in the MP table or the ACPI namespace for this device itself. 1414 * We handle both cases in the search below. 1415 */ 1416 /* this is the non-acpi version */ 1417 int 1418 apic_handle_pci_pci_bridge(dev_info_t *idip, int child_devno, int child_ipin, 1419 struct apic_io_intr **intrp) 1420 { 1421 dev_info_t *dipp, *dip; 1422 int pci_irq; 1423 ddi_acc_handle_t cfg_handle; 1424 int bridge_devno, bridge_bus; 1425 int ipin; 1426 1427 dip = idip; 1428 1429 /*CONSTCOND*/ 1430 while (1) { 1431 if (((dipp = ddi_get_parent(dip)) == (dev_info_t *)NULL) || 1432 (pci_config_setup(dipp, &cfg_handle) != DDI_SUCCESS)) 1433 return (-1); 1434 if ((pci_config_get8(cfg_handle, PCI_CONF_BASCLASS) == 1435 PCI_CLASS_BRIDGE) && (pci_config_get8(cfg_handle, 1436 PCI_CONF_SUBCLASS) == PCI_BRIDGE_PCI)) { 1437 pci_config_teardown(&cfg_handle); 1438 if (acpica_get_bdf(dipp, &bridge_bus, &bridge_devno, 1439 NULL) != 0) 1440 return (-1); 1441 /* 1442 * This is the rotating scheme documented in the 1443 * PCI-to-PCI spec. If the PCI-to-PCI bridge is 1444 * behind another PCI-to-PCI bridge, then it needs 1445 * to keep ascending until an interrupt entry is 1446 * found or the root is reached. 1447 */ 1448 ipin = (child_devno + child_ipin) % PCI_INTD; 1449 if (bridge_bus == 0 && apic_pci_bus_total == 1) 1450 bridge_bus = (int)apic_single_pci_busid; 1451 pci_irq = ((bridge_devno & 0x1f) << 2) | 1452 (ipin & 0x3); 1453 if ((*intrp = apic_find_io_intr_w_busid(pci_irq, 1454 bridge_bus)) != NULL) { 1455 return (pci_irq); 1456 } 1457 dip = dipp; 1458 child_devno = bridge_devno; 1459 child_ipin = ipin; 1460 } else { 1461 pci_config_teardown(&cfg_handle); 1462 return (-1); 1463 } 1464 } 1465 /*LINTED: function will not fall off the bottom */ 1466 } 1467 1468 uchar_t 1469 acpi_find_ioapic(int irq) 1470 { 1471 int i; 1472 1473 for (i = 0; i < apic_io_max; i++) { 1474 if (irq >= apic_io_vectbase[i] && irq <= apic_io_vectend[i]) 1475 return ((uchar_t)i); 1476 } 1477 return (0xFF); /* shouldn't happen */ 1478 } 1479 1480 /* 1481 * See if two irqs are compatible for sharing a vector. 1482 * Currently we only support sharing of PCI devices. 1483 */ 1484 static int 1485 acpi_intr_compatible(iflag_t iflag1, iflag_t iflag2) 1486 { 1487 uint_t level1, po1; 1488 uint_t level2, po2; 1489 1490 /* Assume active high by default */ 1491 po1 = 0; 1492 po2 = 0; 1493 1494 if (iflag1.bustype != iflag2.bustype || iflag1.bustype != BUS_PCI) 1495 return (0); 1496 1497 if (iflag1.intr_el == INTR_EL_CONFORM) 1498 level1 = AV_LEVEL; 1499 else 1500 level1 = (iflag1.intr_el == INTR_EL_LEVEL) ? AV_LEVEL : 0; 1501 1502 if (level1 && ((iflag1.intr_po == INTR_PO_ACTIVE_LOW) || 1503 (iflag1.intr_po == INTR_PO_CONFORM))) 1504 po1 = AV_ACTIVE_LOW; 1505 1506 if (iflag2.intr_el == INTR_EL_CONFORM) 1507 level2 = AV_LEVEL; 1508 else 1509 level2 = (iflag2.intr_el == INTR_EL_LEVEL) ? AV_LEVEL : 0; 1510 1511 if (level2 && ((iflag2.intr_po == INTR_PO_ACTIVE_LOW) || 1512 (iflag2.intr_po == INTR_PO_CONFORM))) 1513 po2 = AV_ACTIVE_LOW; 1514 1515 if ((level1 == level2) && (po1 == po2)) 1516 return (1); 1517 1518 return (0); 1519 } 1520 1521 struct apic_io_intr * 1522 apic_find_io_intr_w_busid(int irqno, int busid) 1523 { 1524 struct apic_io_intr *intrp; 1525 1526 /* 1527 * It can have more than 1 entry with same source bus IRQ, 1528 * but unique with the source bus id 1529 */ 1530 intrp = apic_io_intrp; 1531 if (intrp != NULL) { 1532 while (intrp->intr_entry == APIC_IO_INTR_ENTRY) { 1533 if (intrp->intr_irq == irqno && 1534 intrp->intr_busid == busid && 1535 intrp->intr_type == IO_INTR_INT) 1536 return (intrp); 1537 intrp++; 1538 } 1539 } 1540 APIC_VERBOSE_IOAPIC((CE_NOTE, "Did not find io intr for irqno:" 1541 "busid %x:%x\n", irqno, busid)); 1542 return ((struct apic_io_intr *)NULL); 1543 } 1544 1545 1546 struct mps_bus_info { 1547 char *bus_name; 1548 int bus_id; 1549 } bus_info_array[] = { 1550 "ISA ", BUS_ISA, 1551 "PCI ", BUS_PCI, 1552 "EISA ", BUS_EISA, 1553 "XPRESS", BUS_XPRESS, 1554 "PCMCIA", BUS_PCMCIA, 1555 "VL ", BUS_VL, 1556 "CBUS ", BUS_CBUS, 1557 "CBUSII", BUS_CBUSII, 1558 "FUTURE", BUS_FUTURE, 1559 "INTERN", BUS_INTERN, 1560 "MBI ", BUS_MBI, 1561 "MBII ", BUS_MBII, 1562 "MPI ", BUS_MPI, 1563 "MPSA ", BUS_MPSA, 1564 "NUBUS ", BUS_NUBUS, 1565 "TC ", BUS_TC, 1566 "VME ", BUS_VME, 1567 "PCI-E ", BUS_PCIE 1568 }; 1569 1570 static int 1571 apic_find_bus_type(char *bus) 1572 { 1573 int i = 0; 1574 1575 for (; i < sizeof (bus_info_array)/sizeof (struct mps_bus_info); i++) 1576 if (strncmp(bus, bus_info_array[i].bus_name, 1577 strlen(bus_info_array[i].bus_name)) == 0) 1578 return (bus_info_array[i].bus_id); 1579 APIC_VERBOSE_IOAPIC((CE_WARN, "Did not find bus type for bus %s", bus)); 1580 return (0); 1581 } 1582 1583 static int 1584 apic_find_bus(int busid) 1585 { 1586 struct apic_bus *busp; 1587 1588 busp = apic_busp; 1589 while (busp->bus_entry == APIC_BUS_ENTRY) { 1590 if (busp->bus_id == busid) 1591 return (apic_find_bus_type((char *)&busp->bus_str1)); 1592 busp++; 1593 } 1594 APIC_VERBOSE_IOAPIC((CE_WARN, "Did not find bus for bus id %x", busid)); 1595 return (0); 1596 } 1597 1598 int 1599 apic_find_bus_id(int bustype) 1600 { 1601 struct apic_bus *busp; 1602 1603 busp = apic_busp; 1604 while (busp->bus_entry == APIC_BUS_ENTRY) { 1605 if (apic_find_bus_type((char *)&busp->bus_str1) == bustype) 1606 return (busp->bus_id); 1607 busp++; 1608 } 1609 APIC_VERBOSE_IOAPIC((CE_WARN, "Did not find bus id for bustype %x", 1610 bustype)); 1611 return (-1); 1612 } 1613 1614 /* 1615 * Check if a particular irq need to be reserved for any io_intr 1616 */ 1617 static struct apic_io_intr * 1618 apic_find_io_intr(int irqno) 1619 { 1620 struct apic_io_intr *intrp; 1621 1622 intrp = apic_io_intrp; 1623 if (intrp != NULL) { 1624 while (intrp->intr_entry == APIC_IO_INTR_ENTRY) { 1625 if (intrp->intr_irq == irqno && 1626 intrp->intr_type == IO_INTR_INT) 1627 return (intrp); 1628 intrp++; 1629 } 1630 } 1631 return ((struct apic_io_intr *)NULL); 1632 } 1633 1634 /* 1635 * Check if the given ioapicindex intin combination has already been assigned 1636 * an irq. If so return irqno. Else -1 1637 */ 1638 int 1639 apic_find_intin(uchar_t ioapic, uchar_t intin) 1640 { 1641 apic_irq_t *irqptr; 1642 int i; 1643 1644 /* find ioapic and intin in the apic_irq_table[] and return the index */ 1645 for (i = apic_min_device_irq; i <= apic_max_device_irq; i++) { 1646 irqptr = apic_irq_table[i]; 1647 while (irqptr) { 1648 if ((irqptr->airq_mps_intr_index >= 0) && 1649 (irqptr->airq_intin_no == intin) && 1650 (irqptr->airq_ioapicindex == ioapic)) { 1651 APIC_VERBOSE_IOAPIC((CE_NOTE, "!Found irq " 1652 "entry for ioapic:intin %x:%x " 1653 "shared interrupts ?", ioapic, intin)); 1654 return (i); 1655 } 1656 irqptr = irqptr->airq_next; 1657 } 1658 } 1659 return (-1); 1660 } 1661 1662 int 1663 apic_allocate_irq(int irq) 1664 { 1665 int freeirq, i; 1666 1667 if ((freeirq = apic_find_free_irq(irq, (APIC_RESV_IRQ - 1))) == -1) { 1668 if ((freeirq = apic_find_free_irq(APIC_FIRST_FREE_IRQ, 1669 (irq - 1))) == -1) { 1670 /* 1671 * if BIOS really defines every single irq in the mps 1672 * table, then don't worry about conflicting with 1673 * them, just use any free slot in apic_irq_table 1674 */ 1675 for (i = APIC_FIRST_FREE_IRQ; i < APIC_RESV_IRQ; i++) { 1676 if ((apic_irq_table[i] == NULL) || 1677 apic_irq_table[i]->airq_mps_intr_index == 1678 FREE_INDEX) { 1679 freeirq = i; 1680 break; 1681 } 1682 } 1683 1684 if (freeirq == -1) { 1685 /* This shouldn't happen, but just in case */ 1686 cmn_err(CE_WARN, "%s: NO available IRQ", 1687 psm_name); 1688 return (-1); 1689 } 1690 } 1691 } 1692 1693 if (apic_irq_table[freeirq] == NULL) { 1694 apic_irq_table[freeirq] = 1695 kmem_zalloc(sizeof (apic_irq_t), KM_NOSLEEP); 1696 if (apic_irq_table[freeirq] == NULL) { 1697 cmn_err(CE_WARN, "%s: NO memory to allocate IRQ", 1698 psm_name); 1699 return (-1); 1700 } 1701 apic_irq_table[freeirq]->airq_temp_cpu = IRQ_UNINIT; 1702 apic_irq_table[freeirq]->airq_mps_intr_index = FREE_INDEX; 1703 } 1704 return (freeirq); 1705 } 1706 1707 static int 1708 apic_find_free_irq(int start, int end) 1709 { 1710 int i; 1711 1712 for (i = start; i <= end; i++) 1713 /* Check if any I/O entry needs this IRQ */ 1714 if (apic_find_io_intr(i) == NULL) { 1715 /* Then see if it is free */ 1716 if ((apic_irq_table[i] == NULL) || 1717 (apic_irq_table[i]->airq_mps_intr_index == 1718 FREE_INDEX)) { 1719 return (i); 1720 } 1721 } 1722 return (-1); 1723 } 1724 1725 /* 1726 * compute the polarity, trigger mode and vector for programming into 1727 * the I/O apic and record in airq_rdt_entry. 1728 */ 1729 void 1730 apic_record_rdt_entry(apic_irq_t *irqptr, int irq) 1731 { 1732 int ioapicindex, bus_type, vector; 1733 short intr_index; 1734 uint_t level, po, io_po; 1735 struct apic_io_intr *iointrp; 1736 1737 intr_index = irqptr->airq_mps_intr_index; 1738 DDI_INTR_IMPLDBG((CE_CONT, "apic_record_rdt_entry: intr_index=%d " 1739 "irq = 0x%x dip = 0x%p vector = 0x%x\n", intr_index, irq, 1740 (void *)irqptr->airq_dip, irqptr->airq_vector)); 1741 1742 if (intr_index == RESERVE_INDEX) { 1743 apic_error |= APIC_ERR_INVALID_INDEX; 1744 return; 1745 } else if (APIC_IS_MSI_OR_MSIX_INDEX(intr_index)) { 1746 return; 1747 } 1748 1749 vector = irqptr->airq_vector; 1750 ioapicindex = irqptr->airq_ioapicindex; 1751 /* Assume edge triggered by default */ 1752 level = 0; 1753 /* Assume active high by default */ 1754 po = 0; 1755 1756 if (intr_index == DEFAULT_INDEX || intr_index == FREE_INDEX) { 1757 ASSERT(irq < 16); 1758 if (eisa_level_intr_mask & (1 << irq)) 1759 level = AV_LEVEL; 1760 if (intr_index == FREE_INDEX && apic_defconf == 0) 1761 apic_error |= APIC_ERR_INVALID_INDEX; 1762 } else if (intr_index == ACPI_INDEX) { 1763 bus_type = irqptr->airq_iflag.bustype; 1764 if (irqptr->airq_iflag.intr_el == INTR_EL_CONFORM) { 1765 if (bus_type == BUS_PCI) 1766 level = AV_LEVEL; 1767 } else 1768 level = (irqptr->airq_iflag.intr_el == INTR_EL_LEVEL) ? 1769 AV_LEVEL : 0; 1770 if (level && 1771 ((irqptr->airq_iflag.intr_po == INTR_PO_ACTIVE_LOW) || 1772 (irqptr->airq_iflag.intr_po == INTR_PO_CONFORM && 1773 bus_type == BUS_PCI))) 1774 po = AV_ACTIVE_LOW; 1775 } else { 1776 iointrp = apic_io_intrp + intr_index; 1777 bus_type = apic_find_bus(iointrp->intr_busid); 1778 if (iointrp->intr_el == INTR_EL_CONFORM) { 1779 if ((irq < 16) && (eisa_level_intr_mask & (1 << irq))) 1780 level = AV_LEVEL; 1781 else if (bus_type == BUS_PCI) 1782 level = AV_LEVEL; 1783 } else 1784 level = (iointrp->intr_el == INTR_EL_LEVEL) ? 1785 AV_LEVEL : 0; 1786 if (level && ((iointrp->intr_po == INTR_PO_ACTIVE_LOW) || 1787 (iointrp->intr_po == INTR_PO_CONFORM && 1788 bus_type == BUS_PCI))) 1789 po = AV_ACTIVE_LOW; 1790 } 1791 if (level) 1792 apic_level_intr[irq] = 1; 1793 /* 1794 * The 82489DX External APIC cannot do active low polarity interrupts. 1795 */ 1796 if (po && (apic_io_ver[ioapicindex] != IOAPIC_VER_82489DX)) 1797 io_po = po; 1798 else 1799 io_po = 0; 1800 1801 if (apic_verbose & APIC_VERBOSE_IOAPIC_FLAG) 1802 prom_printf("setio: ioapic=0x%x intin=0x%x level=0x%x po=0x%x " 1803 "vector=0x%x cpu=0x%x\n\n", ioapicindex, 1804 irqptr->airq_intin_no, level, io_po, vector, 1805 irqptr->airq_cpu); 1806 1807 irqptr->airq_rdt_entry = level|io_po|vector; 1808 } 1809 1810 int 1811 apic_acpi_translate_pci_irq(dev_info_t *dip, int busid, int devid, 1812 int ipin, int *pci_irqp, iflag_t *intr_flagp) 1813 { 1814 1815 int status; 1816 acpi_psm_lnk_t acpipsmlnk; 1817 1818 if ((status = acpi_get_irq_cache_ent(busid, devid, ipin, pci_irqp, 1819 intr_flagp)) == ACPI_PSM_SUCCESS) { 1820 APIC_VERBOSE_IRQ((CE_CONT, "!%s: Found irqno %d " 1821 "from cache for device %s, instance #%d\n", psm_name, 1822 *pci_irqp, ddi_get_name(dip), ddi_get_instance(dip))); 1823 return (status); 1824 } 1825 1826 bzero(&acpipsmlnk, sizeof (acpi_psm_lnk_t)); 1827 1828 if ((status = acpi_translate_pci_irq(dip, ipin, pci_irqp, intr_flagp, 1829 &acpipsmlnk)) == ACPI_PSM_FAILURE) { 1830 APIC_VERBOSE_IRQ((CE_WARN, "%s: " 1831 " acpi_translate_pci_irq failed for device %s, instance" 1832 " #%d", psm_name, ddi_get_name(dip), 1833 ddi_get_instance(dip))); 1834 return (status); 1835 } 1836 1837 if (status == ACPI_PSM_PARTIAL && acpipsmlnk.lnkobj != NULL) { 1838 status = apic_acpi_irq_configure(&acpipsmlnk, dip, pci_irqp, 1839 intr_flagp); 1840 if (status != ACPI_PSM_SUCCESS) { 1841 status = acpi_get_current_irq_resource(&acpipsmlnk, 1842 pci_irqp, intr_flagp); 1843 } 1844 } 1845 1846 if (status == ACPI_PSM_SUCCESS) { 1847 acpi_new_irq_cache_ent(busid, devid, ipin, *pci_irqp, 1848 intr_flagp, &acpipsmlnk); 1849 1850 APIC_VERBOSE_IRQ((CE_CONT, "%s: [ACPI] " 1851 "new irq %d for device %s, instance #%d\n", psm_name, 1852 *pci_irqp, ddi_get_name(dip), ddi_get_instance(dip))); 1853 } 1854 1855 return (status); 1856 } 1857 1858 /* 1859 * Adds an entry to the irq list passed in, and returns the new list. 1860 * Entries are added in priority order (lower numerical priorities are 1861 * placed closer to the head of the list) 1862 */ 1863 static prs_irq_list_t * 1864 acpi_insert_prs_irq_ent(prs_irq_list_t *listp, int priority, int irq, 1865 iflag_t *iflagp, acpi_prs_private_t *prsprvp) 1866 { 1867 struct prs_irq_list_ent *newent, *prevp = NULL, *origlistp; 1868 1869 newent = kmem_zalloc(sizeof (struct prs_irq_list_ent), KM_SLEEP); 1870 1871 newent->list_prio = priority; 1872 newent->irq = irq; 1873 newent->intrflags = *iflagp; 1874 newent->prsprv = *prsprvp; 1875 /* ->next is NULL from kmem_zalloc */ 1876 1877 /* 1878 * New list -- return the new entry as the list. 1879 */ 1880 if (listp == NULL) 1881 return (newent); 1882 1883 /* 1884 * Save original list pointer for return (since we're not modifying 1885 * the head) 1886 */ 1887 origlistp = listp; 1888 1889 /* 1890 * Insertion sort, with entries with identical keys stored AFTER 1891 * existing entries (the less-than-or-equal test of priority does 1892 * this for us). 1893 */ 1894 while (listp != NULL && listp->list_prio <= priority) { 1895 prevp = listp; 1896 listp = listp->next; 1897 } 1898 1899 newent->next = listp; 1900 1901 if (prevp == NULL) { /* Add at head of list (newent is the new head) */ 1902 return (newent); 1903 } else { 1904 prevp->next = newent; 1905 return (origlistp); 1906 } 1907 } 1908 1909 /* 1910 * Frees the list passed in, deallocating all memory and leaving *listpp 1911 * set to NULL. 1912 */ 1913 static void 1914 acpi_destroy_prs_irq_list(prs_irq_list_t **listpp) 1915 { 1916 struct prs_irq_list_ent *nextp; 1917 1918 ASSERT(listpp != NULL); 1919 1920 while (*listpp != NULL) { 1921 nextp = (*listpp)->next; 1922 kmem_free(*listpp, sizeof (struct prs_irq_list_ent)); 1923 *listpp = nextp; 1924 } 1925 } 1926 1927 /* 1928 * apic_choose_irqs_from_prs returns a list of irqs selected from the list of 1929 * irqs returned by the link device's _PRS method. The irqs are chosen 1930 * to minimize contention in situations where the interrupt link device 1931 * can be programmed to steer interrupts to different interrupt controller 1932 * inputs (some of which may already be in use). The list is sorted in order 1933 * of irqs to use, with the highest priority given to interrupt controller 1934 * inputs that are not shared. When an interrupt controller input 1935 * must be shared, apic_choose_irqs_from_prs adds the possible irqs to the 1936 * returned list in the order that minimizes sharing (thereby ensuring lowest 1937 * possible latency from interrupt trigger time to ISR execution time). 1938 */ 1939 static prs_irq_list_t * 1940 apic_choose_irqs_from_prs(acpi_irqlist_t *irqlistent, dev_info_t *dip, 1941 int crs_irq) 1942 { 1943 int32_t irq; 1944 int i; 1945 prs_irq_list_t *prsirqlistp = NULL; 1946 iflag_t iflags; 1947 1948 while (irqlistent != NULL) { 1949 irqlistent->intr_flags.bustype = BUS_PCI; 1950 1951 for (i = 0; i < irqlistent->num_irqs; i++) { 1952 1953 irq = irqlistent->irqs[i]; 1954 1955 if (irq <= 0) { 1956 /* invalid irq number */ 1957 continue; 1958 } 1959 1960 if ((irq < 16) && (apic_reserved_irqlist[irq])) 1961 continue; 1962 1963 if ((apic_irq_table[irq] == NULL) || 1964 (apic_irq_table[irq]->airq_dip == dip)) { 1965 1966 prsirqlistp = acpi_insert_prs_irq_ent( 1967 prsirqlistp, 0 /* Highest priority */, irq, 1968 &irqlistent->intr_flags, 1969 &irqlistent->acpi_prs_prv); 1970 1971 /* 1972 * If we do not prefer the current irq from _CRS 1973 * or if we do and this irq is the same as the 1974 * current irq from _CRS, this is the one 1975 * to pick. 1976 */ 1977 if (!(apic_prefer_crs) || (irq == crs_irq)) { 1978 return (prsirqlistp); 1979 } 1980 continue; 1981 } 1982 1983 /* 1984 * Edge-triggered interrupts cannot be shared 1985 */ 1986 if (irqlistent->intr_flags.intr_el == INTR_EL_EDGE) 1987 continue; 1988 1989 /* 1990 * To work around BIOSes that contain incorrect 1991 * interrupt polarity information in interrupt 1992 * descriptors returned by _PRS, we assume that 1993 * the polarity of the other device sharing this 1994 * interrupt controller input is compatible. 1995 * If it's not, the caller will catch it when 1996 * the caller invokes the link device's _CRS method 1997 * (after invoking its _SRS method). 1998 */ 1999 iflags = irqlistent->intr_flags; 2000 iflags.intr_po = 2001 apic_irq_table[irq]->airq_iflag.intr_po; 2002 2003 if (!acpi_intr_compatible(iflags, 2004 apic_irq_table[irq]->airq_iflag)) { 2005 APIC_VERBOSE_IRQ((CE_CONT, "!%s: irq %d " 2006 "not compatible [%x:%x:%x !~ %x:%x:%x]", 2007 psm_name, irq, 2008 iflags.intr_po, 2009 iflags.intr_el, 2010 iflags.bustype, 2011 apic_irq_table[irq]->airq_iflag.intr_po, 2012 apic_irq_table[irq]->airq_iflag.intr_el, 2013 apic_irq_table[irq]->airq_iflag.bustype)); 2014 continue; 2015 } 2016 2017 /* 2018 * If we prefer the irq from _CRS, no need 2019 * to search any further (and make sure 2020 * to add this irq with the highest priority 2021 * so it's tried first). 2022 */ 2023 if (crs_irq == irq && apic_prefer_crs) { 2024 2025 return (acpi_insert_prs_irq_ent( 2026 prsirqlistp, 2027 0 /* Highest priority */, 2028 irq, &iflags, 2029 &irqlistent->acpi_prs_prv)); 2030 } 2031 2032 /* 2033 * Priority is equal to the share count (lower 2034 * share count is higher priority). Note that 2035 * the intr flags passed in here are the ones we 2036 * changed above -- if incorrect, it will be 2037 * caught by the caller's _CRS flags comparison. 2038 */ 2039 prsirqlistp = acpi_insert_prs_irq_ent( 2040 prsirqlistp, 2041 apic_irq_table[irq]->airq_share, irq, 2042 &iflags, &irqlistent->acpi_prs_prv); 2043 } 2044 2045 /* Go to the next irqlist entry */ 2046 irqlistent = irqlistent->next; 2047 } 2048 2049 return (prsirqlistp); 2050 } 2051 2052 /* 2053 * Configures the irq for the interrupt link device identified by 2054 * acpipsmlnkp. 2055 * 2056 * Gets the current and the list of possible irq settings for the 2057 * device. If apic_unconditional_srs is not set, and the current 2058 * resource setting is in the list of possible irq settings, 2059 * current irq resource setting is passed to the caller. 2060 * 2061 * Otherwise, picks an irq number from the list of possible irq 2062 * settings, and sets the irq of the device to this value. 2063 * If prefer_crs is set, among a set of irq numbers in the list that have 2064 * the least number of devices sharing the interrupt, we pick current irq 2065 * resource setting if it is a member of this set. 2066 * 2067 * Passes the irq number in the value pointed to by pci_irqp, and 2068 * polarity and sensitivity in the structure pointed to by dipintrflagp 2069 * to the caller. 2070 * 2071 * Note that if setting the irq resource failed, but successfuly obtained 2072 * the current irq resource settings, passes the current irq resources 2073 * and considers it a success. 2074 * 2075 * Returns: 2076 * ACPI_PSM_SUCCESS on success. 2077 * 2078 * ACPI_PSM_FAILURE if an error occured during the configuration or 2079 * if a suitable irq was not found for this device, or if setting the 2080 * irq resource and obtaining the current resource fails. 2081 * 2082 */ 2083 static int 2084 apic_acpi_irq_configure(acpi_psm_lnk_t *acpipsmlnkp, dev_info_t *dip, 2085 int *pci_irqp, iflag_t *dipintr_flagp) 2086 { 2087 int32_t irq; 2088 int cur_irq = -1; 2089 acpi_irqlist_t *irqlistp; 2090 prs_irq_list_t *prs_irq_listp, *prs_irq_entp; 2091 boolean_t found_irq = B_FALSE; 2092 2093 dipintr_flagp->bustype = BUS_PCI; 2094 2095 if ((acpi_get_possible_irq_resources(acpipsmlnkp, &irqlistp)) 2096 == ACPI_PSM_FAILURE) { 2097 APIC_VERBOSE_IRQ((CE_WARN, "!%s: Unable to determine " 2098 "or assign IRQ for device %s, instance #%d: The system was " 2099 "unable to get the list of potential IRQs from ACPI.", 2100 psm_name, ddi_get_name(dip), ddi_get_instance(dip))); 2101 2102 return (ACPI_PSM_FAILURE); 2103 } 2104 2105 if ((acpi_get_current_irq_resource(acpipsmlnkp, &cur_irq, 2106 dipintr_flagp) == ACPI_PSM_SUCCESS) && (!apic_unconditional_srs) && 2107 (cur_irq > 0)) { 2108 /* 2109 * If an IRQ is set in CRS and that IRQ exists in the set 2110 * returned from _PRS, return that IRQ, otherwise print 2111 * a warning 2112 */ 2113 2114 if (acpi_irqlist_find_irq(irqlistp, cur_irq, NULL) 2115 == ACPI_PSM_SUCCESS) { 2116 2117 ASSERT(pci_irqp != NULL); 2118 *pci_irqp = cur_irq; 2119 acpi_free_irqlist(irqlistp); 2120 return (ACPI_PSM_SUCCESS); 2121 } 2122 2123 APIC_VERBOSE_IRQ((CE_WARN, "!%s: Could not find the " 2124 "current irq %d for device %s, instance #%d in ACPI's " 2125 "list of possible irqs for this device. Picking one from " 2126 " the latter list.", psm_name, cur_irq, ddi_get_name(dip), 2127 ddi_get_instance(dip))); 2128 } 2129 2130 if ((prs_irq_listp = apic_choose_irqs_from_prs(irqlistp, dip, 2131 cur_irq)) == NULL) { 2132 2133 APIC_VERBOSE_IRQ((CE_WARN, "!%s: Could not find a " 2134 "suitable irq from the list of possible irqs for device " 2135 "%s, instance #%d in ACPI's list of possible irqs", 2136 psm_name, ddi_get_name(dip), ddi_get_instance(dip))); 2137 2138 acpi_free_irqlist(irqlistp); 2139 return (ACPI_PSM_FAILURE); 2140 } 2141 2142 acpi_free_irqlist(irqlistp); 2143 2144 for (prs_irq_entp = prs_irq_listp; 2145 prs_irq_entp != NULL && found_irq == B_FALSE; 2146 prs_irq_entp = prs_irq_entp->next) { 2147 2148 acpipsmlnkp->acpi_prs_prv = prs_irq_entp->prsprv; 2149 irq = prs_irq_entp->irq; 2150 2151 APIC_VERBOSE_IRQ((CE_CONT, "!%s: Setting irq %d for " 2152 "device %s instance #%d\n", psm_name, irq, 2153 ddi_get_name(dip), ddi_get_instance(dip))); 2154 2155 if ((acpi_set_irq_resource(acpipsmlnkp, irq)) 2156 == ACPI_PSM_SUCCESS) { 2157 /* 2158 * setting irq was successful, check to make sure CRS 2159 * reflects that. If CRS does not agree with what we 2160 * set, return the irq that was set. 2161 */ 2162 2163 if (acpi_get_current_irq_resource(acpipsmlnkp, &cur_irq, 2164 dipintr_flagp) == ACPI_PSM_SUCCESS) { 2165 2166 if (cur_irq != irq) 2167 APIC_VERBOSE_IRQ((CE_WARN, 2168 "!%s: IRQ resource set " 2169 "(irqno %d) for device %s " 2170 "instance #%d, differs from " 2171 "current setting irqno %d", 2172 psm_name, irq, ddi_get_name(dip), 2173 ddi_get_instance(dip), cur_irq)); 2174 } else { 2175 /* 2176 * On at least one system, there was a bug in 2177 * a DSDT method called by _STA, causing _STA to 2178 * indicate that the link device was disabled 2179 * (when, in fact, it was enabled). Since _SRS 2180 * succeeded, assume that _CRS is lying and use 2181 * the iflags from this _PRS interrupt choice. 2182 * If we're wrong about the flags, the polarity 2183 * will be incorrect and we may get an interrupt 2184 * storm, but there's not much else we can do 2185 * at this point. 2186 */ 2187 *dipintr_flagp = prs_irq_entp->intrflags; 2188 } 2189 2190 /* 2191 * Return the irq that was set, and not what _CRS 2192 * reports, since _CRS has been seen to return 2193 * different IRQs than what was passed to _SRS on some 2194 * systems (and just not return successfully on others). 2195 */ 2196 cur_irq = irq; 2197 found_irq = B_TRUE; 2198 } else { 2199 APIC_VERBOSE_IRQ((CE_WARN, "!%s: set resource " 2200 "irq %d failed for device %s instance #%d", 2201 psm_name, irq, ddi_get_name(dip), 2202 ddi_get_instance(dip))); 2203 2204 if (cur_irq == -1) { 2205 acpi_destroy_prs_irq_list(&prs_irq_listp); 2206 return (ACPI_PSM_FAILURE); 2207 } 2208 } 2209 } 2210 2211 acpi_destroy_prs_irq_list(&prs_irq_listp); 2212 2213 if (!found_irq) 2214 return (ACPI_PSM_FAILURE); 2215 2216 ASSERT(pci_irqp != NULL); 2217 *pci_irqp = cur_irq; 2218 return (ACPI_PSM_SUCCESS); 2219 } 2220 2221 void 2222 ioapic_disable_redirection() 2223 { 2224 int ioapic_ix; 2225 int intin_max; 2226 int intin_ix; 2227 2228 /* Disable the I/O APIC redirection entries */ 2229 for (ioapic_ix = 0; ioapic_ix < apic_io_max; ioapic_ix++) { 2230 2231 /* Bits 23-16 define the maximum redirection entries */ 2232 intin_max = (ioapic_read(ioapic_ix, APIC_VERS_CMD) >> 16) 2233 & 0xff; 2234 2235 for (intin_ix = 0; intin_ix <= intin_max; intin_ix++) { 2236 /* 2237 * The assumption here is that this is safe, even for 2238 * systems with IOAPICs that suffer from the hardware 2239 * erratum because all devices have been quiesced before 2240 * this function is called from apic_shutdown() 2241 * (or equivalent). If that assumption turns out to be 2242 * false, this mask operation can induce the same 2243 * erratum result we're trying to avoid. 2244 */ 2245 ioapic_write(ioapic_ix, APIC_RDT_CMD + 2 * intin_ix, 2246 AV_MASK); 2247 } 2248 } 2249 } 2250 2251 /* 2252 * Looks for an IOAPIC with the specified physical address in the /ioapics 2253 * node in the device tree (created by the PCI enumerator). 2254 */ 2255 static boolean_t 2256 apic_is_ioapic_AMD_813x(uint32_t physaddr) 2257 { 2258 /* 2259 * Look in /ioapics, for the ioapic with 2260 * the physical address given 2261 */ 2262 dev_info_t *ioapicsnode = ddi_find_devinfo(IOAPICS_NODE_NAME, -1, 0); 2263 dev_info_t *ioapic_child; 2264 boolean_t rv = B_FALSE; 2265 int vid, did; 2266 uint64_t ioapic_paddr; 2267 boolean_t done = B_FALSE; 2268 2269 if (ioapicsnode == NULL) 2270 return (B_FALSE); 2271 2272 /* Load first child: */ 2273 ioapic_child = ddi_get_child(ioapicsnode); 2274 while (!done && ioapic_child != 0) { /* Iterate over children */ 2275 2276 if ((ioapic_paddr = (uint64_t)ddi_prop_get_int64(DDI_DEV_T_ANY, 2277 ioapic_child, DDI_PROP_DONTPASS, "reg", 0)) 2278 != 0 && physaddr == ioapic_paddr) { 2279 2280 vid = ddi_prop_get_int(DDI_DEV_T_ANY, ioapic_child, 2281 DDI_PROP_DONTPASS, IOAPICS_PROP_VENID, 0); 2282 2283 if (vid == VENID_AMD) { 2284 2285 did = ddi_prop_get_int(DDI_DEV_T_ANY, 2286 ioapic_child, DDI_PROP_DONTPASS, 2287 IOAPICS_PROP_DEVID, 0); 2288 2289 if (did == DEVID_8131_IOAPIC || 2290 did == DEVID_8132_IOAPIC) { 2291 rv = B_TRUE; 2292 done = B_TRUE; 2293 } 2294 } 2295 } 2296 2297 if (!done) 2298 ioapic_child = ddi_get_next_sibling(ioapic_child); 2299 } 2300 2301 /* The ioapics node was held by ddi_find_devinfo, so release it */ 2302 ndi_rele_devi(ioapicsnode); 2303 return (rv); 2304 } 2305 2306 struct apic_state { 2307 int32_t as_task_reg; 2308 int32_t as_dest_reg; 2309 int32_t as_format_reg; 2310 int32_t as_local_timer; 2311 int32_t as_pcint_vect; 2312 int32_t as_int_vect0; 2313 int32_t as_int_vect1; 2314 int32_t as_err_vect; 2315 int32_t as_init_count; 2316 int32_t as_divide_reg; 2317 int32_t as_spur_int_reg; 2318 uint32_t as_ioapic_ids[MAX_IO_APIC]; 2319 }; 2320 2321 2322 static int 2323 apic_acpi_enter_apicmode(void) 2324 { 2325 ACPI_OBJECT_LIST arglist; 2326 ACPI_OBJECT arg; 2327 ACPI_STATUS status; 2328 2329 /* Setup parameter object */ 2330 arglist.Count = 1; 2331 arglist.Pointer = &arg; 2332 arg.Type = ACPI_TYPE_INTEGER; 2333 arg.Integer.Value = ACPI_APIC_MODE; 2334 2335 status = AcpiEvaluateObject(NULL, "\\_PIC", &arglist, NULL); 2336 /* 2337 * Per ACPI spec - section 5.8.1 _PIC Method 2338 * calling the \_PIC control method is optional for the OS 2339 * and might not be found. It's ok to not fail in such cases. 2340 * This is the case on linux KVM and qemu (status AE_NOT_FOUND) 2341 */ 2342 if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { 2343 cmn_err(CE_NOTE, 2344 "!apic: Reporting APIC mode failed (via _PIC), err: 0x%x", 2345 ACPI_FAILURE(status)); 2346 return (PSM_FAILURE); 2347 } else { 2348 return (PSM_SUCCESS); 2349 } 2350 } 2351 2352 2353 static void 2354 apic_save_state(struct apic_state *sp) 2355 { 2356 int i, cpuid; 2357 ulong_t iflag; 2358 2359 PMD(PMD_SX, ("apic_save_state %p\n", (void *)sp)) 2360 /* 2361 * First the local APIC. 2362 */ 2363 sp->as_task_reg = apic_reg_ops->apic_get_pri(); 2364 sp->as_dest_reg = apic_reg_ops->apic_read(APIC_DEST_REG); 2365 if (apic_mode == LOCAL_APIC) 2366 sp->as_format_reg = apic_reg_ops->apic_read(APIC_FORMAT_REG); 2367 sp->as_local_timer = apic_reg_ops->apic_read(APIC_LOCAL_TIMER); 2368 sp->as_pcint_vect = apic_reg_ops->apic_read(APIC_PCINT_VECT); 2369 sp->as_int_vect0 = apic_reg_ops->apic_read(APIC_INT_VECT0); 2370 sp->as_int_vect1 = apic_reg_ops->apic_read(APIC_INT_VECT1); 2371 sp->as_err_vect = apic_reg_ops->apic_read(APIC_ERR_VECT); 2372 sp->as_init_count = apic_reg_ops->apic_read(APIC_INIT_COUNT); 2373 sp->as_divide_reg = apic_reg_ops->apic_read(APIC_DIVIDE_REG); 2374 sp->as_spur_int_reg = apic_reg_ops->apic_read(APIC_SPUR_INT_REG); 2375 2376 /* 2377 * If on the boot processor then save the IOAPICs' IDs 2378 */ 2379 if ((cpuid = psm_get_cpu_id()) == 0) { 2380 2381 iflag = intr_clear(); 2382 lock_set(&apic_ioapic_lock); 2383 2384 for (i = 0; i < apic_io_max; i++) 2385 sp->as_ioapic_ids[i] = ioapic_read(i, APIC_ID_CMD); 2386 2387 lock_clear(&apic_ioapic_lock); 2388 intr_restore(iflag); 2389 } 2390 2391 /* apic_state() is currently invoked only in Suspend/Resume */ 2392 apic_cpus[cpuid].aci_status |= APIC_CPU_SUSPEND; 2393 } 2394 2395 static void 2396 apic_restore_state(struct apic_state *sp) 2397 { 2398 int i; 2399 ulong_t iflag; 2400 2401 /* 2402 * First the local APIC. 2403 */ 2404 apic_reg_ops->apic_write_task_reg(sp->as_task_reg); 2405 if (apic_mode == LOCAL_APIC) { 2406 apic_reg_ops->apic_write(APIC_DEST_REG, sp->as_dest_reg); 2407 apic_reg_ops->apic_write(APIC_FORMAT_REG, sp->as_format_reg); 2408 } 2409 apic_reg_ops->apic_write(APIC_LOCAL_TIMER, sp->as_local_timer); 2410 apic_reg_ops->apic_write(APIC_PCINT_VECT, sp->as_pcint_vect); 2411 apic_reg_ops->apic_write(APIC_INT_VECT0, sp->as_int_vect0); 2412 apic_reg_ops->apic_write(APIC_INT_VECT1, sp->as_int_vect1); 2413 apic_reg_ops->apic_write(APIC_ERR_VECT, sp->as_err_vect); 2414 apic_reg_ops->apic_write(APIC_INIT_COUNT, sp->as_init_count); 2415 apic_reg_ops->apic_write(APIC_DIVIDE_REG, sp->as_divide_reg); 2416 apic_reg_ops->apic_write(APIC_SPUR_INT_REG, sp->as_spur_int_reg); 2417 2418 /* 2419 * the following only needs to be done once, so we do it on the 2420 * boot processor, since we know that we only have one of those 2421 */ 2422 if (psm_get_cpu_id() == 0) { 2423 2424 iflag = intr_clear(); 2425 lock_set(&apic_ioapic_lock); 2426 2427 /* Restore IOAPICs' APIC IDs */ 2428 for (i = 0; i < apic_io_max; i++) { 2429 ioapic_write(i, APIC_ID_CMD, sp->as_ioapic_ids[i]); 2430 } 2431 2432 lock_clear(&apic_ioapic_lock); 2433 intr_restore(iflag); 2434 2435 /* 2436 * Reenter APIC mode before restoring LNK devices 2437 */ 2438 (void) apic_acpi_enter_apicmode(); 2439 2440 /* 2441 * restore acpi link device mappings 2442 */ 2443 acpi_restore_link_devices(); 2444 } 2445 } 2446 2447 /* 2448 * Returns 0 on success 2449 */ 2450 int 2451 apic_state(psm_state_request_t *rp) 2452 { 2453 PMD(PMD_SX, ("apic_state ")) 2454 switch (rp->psr_cmd) { 2455 case PSM_STATE_ALLOC: 2456 rp->req.psm_state_req.psr_state = 2457 kmem_zalloc(sizeof (struct apic_state), KM_NOSLEEP); 2458 if (rp->req.psm_state_req.psr_state == NULL) 2459 return (ENOMEM); 2460 rp->req.psm_state_req.psr_state_size = 2461 sizeof (struct apic_state); 2462 PMD(PMD_SX, (":STATE_ALLOC: state %p, size %lx\n", 2463 rp->req.psm_state_req.psr_state, 2464 rp->req.psm_state_req.psr_state_size)) 2465 return (0); 2466 2467 case PSM_STATE_FREE: 2468 kmem_free(rp->req.psm_state_req.psr_state, 2469 rp->req.psm_state_req.psr_state_size); 2470 PMD(PMD_SX, (" STATE_FREE: state %p, size %lx\n", 2471 rp->req.psm_state_req.psr_state, 2472 rp->req.psm_state_req.psr_state_size)) 2473 return (0); 2474 2475 case PSM_STATE_SAVE: 2476 PMD(PMD_SX, (" STATE_SAVE: state %p, size %lx\n", 2477 rp->req.psm_state_req.psr_state, 2478 rp->req.psm_state_req.psr_state_size)) 2479 apic_save_state(rp->req.psm_state_req.psr_state); 2480 return (0); 2481 2482 case PSM_STATE_RESTORE: 2483 apic_restore_state(rp->req.psm_state_req.psr_state); 2484 PMD(PMD_SX, (" STATE_RESTORE: state %p, size %lx\n", 2485 rp->req.psm_state_req.psr_state, 2486 rp->req.psm_state_req.psr_state_size)) 2487 return (0); 2488 2489 default: 2490 return (EINVAL); 2491 } 2492 } 2493