1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2006 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SYS_USB_OHCI_H 27 #define _SYS_USB_OHCI_H 28 29 #pragma ident "%Z%%M% %I% %E% SMI" 30 31 #ifdef __cplusplus 32 extern "C" { 33 #endif 34 35 /* 36 * Open Host Controller Driver (OHCI) 37 * 38 * The USB Open Host Controller driver is a software driver which interfaces 39 * to the Universal Serial Bus layer (USBA) and the USB Open Host Controller. 40 * The interface to USB Open Host Controller is defined by the OpenHCI Host 41 * Controller Interface. 42 * 43 * This header file describes the registers and data structures shared by the 44 * USB Open Host Controller and the USB Open Host Controller Driver. 45 */ 46 47 #include <sys/types.h> 48 #include <sys/pci.h> 49 #include <sys/kstat.h> 50 #include <sys/sunddi.h> 51 #include <sys/sunndi.h> 52 #include <sys/ndi_impldefs.h> 53 54 #include <sys/usb/usba.h> 55 56 #include <sys/usb/usba/hcdi.h> 57 58 #include <sys/usb/hubd/hub.h> 59 #include <sys/usb/usba/hubdi.h> 60 #include <sys/usb/hubd/hubdvar.h> 61 62 #include <sys/id32.h> 63 64 #define OHCI_MAX_RH_PORTS 15 /* Maximum root hub ports */ 65 66 /* 67 * Each OHCI buffer can hold upto 8k bytes of data. Hence there is a 68 * restriction of 4k alignment while allocating a dma buffer. 69 */ 70 #define OHCI_4K_ALIGN 0x1000 71 72 /* 73 * USB Host controller DMA scatter gather list defines for 74 * Sparc and non-sparc architectures. 75 */ 76 #if defined(__sparc) 77 #define OHCI_DMA_ATTR_MAX_XFER 0xffffffffull 78 #define OHCI_DMA_ATTR_COUNT_MAX 0xffffffffull 79 #define OHCI_DMA_ATTR_GRANULAR 512 80 #define OHCI_DMA_ATTR_ALIGNMENT OHCI_4K_ALIGN 81 #else 82 #define OHCI_DMA_ATTR_MAX_XFER 0x00ffffffull 83 #define OHCI_DMA_ATTR_COUNT_MAX 0x00ffffffull 84 #define OHCI_DMA_ATTR_GRANULAR 1 85 #define OHCI_DMA_ATTR_ALIGNMENT OHCI_4K_ALIGN 86 #endif 87 88 #define OHCI_DMA_ATTR_TW_SGLLEN 0x7fffffff /* not limited */ 89 #define OHCI_DMA_ATTR_TD_SGLLEN 2 /* maximum 8K per TD */ 90 91 /* 92 * According to the OHCI spec ED and TD need to be 16 byte aligned. 93 * However, iTD needs to be 32 byte aligned. Since we do not 94 * distinguish between iTD and TD, make them both 32 byte aligned. 95 * 96 * ED = 16 byte aligned 97 * TD = 32 byte aligned 98 * HCCA = 256 byte aligned 99 */ 100 #define OHCI_DMA_ATTR_ED_ALIGNMENT 0x010 101 #define OHCI_DMA_ATTR_TD_ALIGNMENT 0x020 102 #define OHCI_DMA_ATTR_HCCA_ALIGNMENT 0x100 103 104 /* 105 * Vendor id and Device id for ULI1575 southbridge. 106 */ 107 #define PCI_ULI1575_VENID 0x10B9 108 #define PCI_ULI1575_DEVID 0x5237 109 110 /* 111 * Need a workaround for ULI1575 chipset. Following OHCI 112 * Operational Memory Registers are not cleared to their 113 * default value on reset. Explicitly set the registers 114 * to default value after reset. 115 */ 116 #define HCR_CONTROL_DEFAULT 0x0 117 #define HCR_INT_ENABLE_DEFAULT 0x0 118 #define HCR_HCCA_DEFAULT 0x0 119 #define HCR_CONTROL_HEAD_ED_DEFAULT 0x0 120 #define HCR_BULK_HEAD_ED_DEFAULT 0x0 121 #define HCR_FRAME_INTERVAL_DEFAULT 0x2edf 122 #define HCR_PERIODIC_START_DEFAULT 0x0 123 124 /* 125 * OpenHCI Operational Registers 126 * 127 * The Host Controller (HC) contains a set of on-chip operational registers 128 * which are mapped into a noncacheable portion of the system addressable 129 * space and these registers are also used by the Host Controller Driver 130 * (HCD). 131 */ 132 typedef volatile struct ohci_regs { 133 /* Control and status registers */ 134 uint32_t hcr_revision; /* Specification version */ 135 uint32_t hcr_control; /* Control information */ 136 uint32_t hcr_cmd_status; /* Controller status */ 137 uint32_t hcr_intr_status; /* Interrupt status register */ 138 uint32_t hcr_intr_enable; /* Interrupt enable */ 139 uint32_t hcr_intr_disable; /* Interrupt disable */ 140 141 /* Memory pointer registers */ 142 uint32_t hcr_HCCA; /* Pointer to HCCA */ 143 uint32_t hcr_periodic_curr; /* Curr. isoch or int endpt */ 144 uint32_t hcr_ctrl_head; /* Head of contrl list */ 145 uint32_t hcr_ctrl_curr; /* Curr. control endpt */ 146 uint32_t hcr_bulk_head; /* Head of the bulk list */ 147 uint32_t hcr_bulk_curr; /* Curr. bulk endpt */ 148 uint32_t hcr_done_head; /* Head of the done list */ 149 150 /* Frame counter registers */ 151 uint32_t hcr_frame_interval; /* Frame interval value */ 152 uint32_t hcr_frame_remaining; /* Time remaining in frame */ 153 uint32_t hcr_frame_number; /* Frame number */ 154 uint32_t hcr_periodic_strt; /* Time to start per. list */ 155 uint32_t hcr_transfer_ls; /* Low speed threshold */ 156 157 /* Root hub registers */ 158 uint32_t hcr_rh_descriptorA; /* Root hub register A */ 159 uint32_t hcr_rh_descriptorB; /* Root hub register B */ 160 uint32_t hcr_rh_status; /* Root hub status */ 161 uint32_t hcr_rh_portstatus[OHCI_MAX_RH_PORTS]; /* RH port sts */ 162 } ohci_regs_t; 163 164 /* hcr_revision bits */ 165 #define HCR_REVISION_1_0 0x00000010 /* Revision 1.0 */ 166 #define HCR_REVISION_MASK 0x000000FF /* Revision mask */ 167 168 /* hcr_control bits */ 169 #define HCR_CONTROL_CBSR 0x00000003 /* Control/bulk ratio */ 170 #define HCR_CONTROL_PLE 0x00000004 /* Periodic list enable */ 171 #define HCR_CONTROL_IE 0x00000008 /* Isochronous enable */ 172 #define HCR_CONTROL_CLE 0x00000010 /* Control list enable */ 173 #define HCR_CONTROL_BLE 0x00000020 /* Bulk list enable */ 174 #define HCR_CONTROL_HCFS 0x000000C0 /* Controller state */ 175 #define HCR_CONTROL_IR 0x00000100 /* Interrupt routing */ 176 #define HCR_CONTROL_RWC 0x00000200 /* Remote wakeup connected */ 177 #define HCR_CONTROL_RWE 0x00000400 /* Remote wakeup enabled */ 178 179 /* Values for the Host Controller Functional State bits (HCR_CONTROL_HCFS) */ 180 #define HCR_CONTROL_RESET 0x00000000 /* USB Reset */ 181 #define HCR_CONTROL_RESUME 0x00000040 /* USB Resume */ 182 #define HCR_CONTROL_OPERAT 0x00000080 /* USB Operational */ 183 #define HCR_CONTROL_SUSPD 0x000000C0 /* USB Suspend */ 184 185 /* hcr_cmd_status bits */ 186 #define HCR_STATUS_RESET 0x00000001 /* Host controller reset */ 187 #define HCR_STATUS_CLF 0x00000002 /* Control list filled */ 188 #define HCR_STATUS_BLF 0x00000004 /* Bulk list filled */ 189 #define HCR_STATUS_OCR 0x00000008 /* Ownership change */ 190 #define HCR_STATUS_SOC 0x00030000 /* Error frame count */ 191 192 /* hcr_intr_status bits and hcr_intr_mask bits */ 193 #define HCR_INTR_SO 0x00000001 /* Schedule overrun */ 194 #define HCR_INTR_WDH 0x00000002 /* Writeback done head */ 195 #define HCR_INTR_SOF 0x00000004 /* Start of frame */ 196 #define HCR_INTR_RD 0x00000008 /* Resume detected */ 197 #define HCR_INTR_UE 0x00000010 /* Unrecoverable error */ 198 #define HCR_INTR_FNO 0x00000020 /* Frame no. overflow */ 199 #define HCR_INTR_RHSC 0x00000040 /* Root hub status change */ 200 #define HCR_INTR_OC 0x40000000 /* Change in ownership */ 201 #define HCR_INTR_MIE 0x80000000 /* Master interrupt enable */ 202 203 /* hcr_frame_interval bits */ 204 #define HCR_FRME_INT_FI 0x00003FFF /* Frame interval */ 205 #define HCR_FRME_INT_FSMPS 0x7FFF0000 /* Biggest packet */ 206 #define HCR_FRME_FSMPS_SHFT 16 /* FSMPS */ 207 #define HCR_FRME_INT_FIT 0x80000000 /* Frame interval toggle */ 208 #define MAX_OVERHEAD 210 /* Max. bit overhead */ 209 210 /* hcr_frame_remaining bits */ 211 #define HCR_FRME_REM_FR 0x00003FFF /* Frame remaining */ 212 #define HCR_FRME_REM_FRT 0x80000000 /* Frame remaining toggle */ 213 214 /* hcr_transfer_ls */ 215 #define HCR_TRANS_LST 0x000007FF /* Low Speed threshold */ 216 217 /* hcr_rh_descriptorA bits */ 218 #define HCR_RHA_NDP 0x000000FF /* No. of ports */ 219 #define HCR_RHA_PSM 0x00000100 /* Power switch mode */ 220 #define HCR_RHA_NPS 0x00000200 /* No power switching */ 221 #define HCR_RHA_DT 0x00000400 /* Device type */ 222 #define HCR_RHA_OCPM 0x00000800 /* Over-current protection */ 223 #define HCR_RHA_NOCP 0x00001000 /* No over-current protection */ 224 #define HCR_RHA_PTPGT 0xFF000000 /* Power on to power good */ 225 #define HCR_RHA_PTPGT_SHIFT 24 /* Shift bits for ptpgt */ 226 227 /* hcr_rh_descriptorB bits */ 228 #define HCR_RHB_DR 0x0000FFFF /* Device removable */ 229 #define HCR_RHB_PPCM 0xFFFF0000 /* PortPowerControlMask */ 230 231 /* hcr_rh_status bits */ 232 #define HCR_RH_STATUS_LPS 0x00000001 /* Local power status */ 233 #define HCR_RH_STATUS_OCI 0x00000002 /* Over current indicator */ 234 #define HCR_RH_STATUS_DRWE 0x00008000 /* Device remote wakeup */ 235 #define HCR_RH_STATUS_LPSC 0x00010000 /* Local power status change */ 236 #define HCR_RH_STATUS_OCIC 0x00020000 /* Over current indicator */ 237 #define HCR_RH_STATUS_CRWE 0x80000000 /* Clear remote wakeup enable */ 238 #define HCR_RH_STATUS_MASK 0x10038003 /* Status mask */ 239 240 /* hcr_rh_portstatus bits */ 241 #define HCR_PORT_CCS 0x00000001 /* Current connect status */ 242 #define HCR_PORT_PES 0x00000002 /* Port enable */ 243 #define HCR_PORT_PSS 0x00000004 /* Port suspend status */ 244 #define HCR_PORT_POCI 0x00000008 /* Port over crrnt indicator */ 245 #define HCR_PORT_PRS 0x00000010 /* Port reset status */ 246 #define HCR_PORT_PPS 0x00000100 /* Port power status */ 247 #define HCR_PORT_CPP 0x00000200 /* Clear port power */ 248 #define HCR_PORT_LSDA 0x00000200 /* Low speed device */ 249 #define HCR_PORT_CSC 0x00010000 /* Connect status change */ 250 #define HCR_PORT_PESC 0x00020000 /* Port enable status change */ 251 #define HCR_PORT_PSSC 0x00040000 /* Port suspend status change */ 252 #define HCR_PORT_OCIC 0x00080000 /* Port over current change */ 253 #define HCR_PORT_PRSC 0x00100000 /* Port reset status chnge */ 254 #define HCR_PORT_MASK 0x001F031F /* Reserved written as 0 */ 255 #define HCR_PORT_CHNG_MASK 0x001F0000 /* Mask for change bits */ 256 257 #define DONE_QUEUE_INTR_COUNTER 0x7 /* Done queue intr counter */ 258 259 /* 260 * Host Controller Communications Area 261 * 262 * The Host Controller Communications Area (HCCA) is a 256-byte structre 263 * of system memory that is established by the Host Controller Driver (HCD) 264 * and this structre is used for communication between HCD and HC. The HCD 265 * maintains a pointer to this structure in the Host Controller (HC). This 266 * structure must be aligned to a 256-byte boundary. 267 */ 268 269 #define NUM_INTR_ED_LISTS 32 /* Number of interrupt lists */ 270 #define NUM_STATIC_NODES 31 /* Number of static endpoints */ 271 272 typedef volatile struct ohci_hcca { 273 uint32_t HccaIntTble[NUM_INTR_ED_LISTS]; /* 32 intr lists */ 274 /* Ptrs to ohci_ed */ 275 uint16_t HccaFrameNo; /* Current frame number */ 276 uint16_t HccaPad; /* 0 when HC updates FrameNo */ 277 uint32_t HccaDoneHead; /* Head ptr */ 278 uint8_t HccaReserved[120]; /* Reserved area */ 279 } ohci_hcca_t; 280 281 #define HCCA_DONE_HEAD_MASK 0xFFFFFFF0 /* Hcca done head mask */ 282 #define HCCA_DONE_HEAD_LSB 0x00000001 /* Lsb of the Done Head */ 283 284 285 /* 286 * Host Controller Endpoint Descriptor 287 * 288 * An Endpoint Descriptor (ED) is a memory structure that describes the 289 * information necessary for the Host Controller (HC) to communicate with 290 * a device endpoint. An ED includes a Transfer Descriptor (TD) pointer. 291 * This structure must be aligned to a 16 byte boundary. 292 */ 293 typedef volatile struct ohci_ed { 294 uint32_t hced_ctrl; /* See below */ 295 uint32_t hced_tailp; /* (ohci_td *) End of trans. list */ 296 uint32_t hced_headp; /* (ohci_td *) Next trans. */ 297 uint32_t hced_next; /* (ohci_ed *) Next endpoint */ 298 uint32_t hced_prev; /* (ohci_ed *)Virt addr. of prev ept */ 299 uint32_t hced_node; /* The node that its attached */ 300 uint32_t hced_reclaim_next; /* (ohci_ed *) Reclaim list */ 301 uint32_t hced_reclaim_frame; /* Reclaim usb frame number */ 302 uint32_t hced_state; /* Endpoint state */ 303 uint8_t hce_pad[12]; /* Required padding */ 304 } ohci_ed_t; 305 306 /* 307 * hc_endpoint_descriptor control bits 308 */ 309 #define HC_EPT_FUNC 0x0000007F /* Address of function */ 310 #define HC_EPT_EP 0x00000780 /* Address of endpoint */ 311 #define HC_EPT_DataFlow 0x00001800 /* Direction of data flow */ 312 #define HC_EPT_DF_IN 0x00001000 /* Data flow in */ 313 #define HC_EPT_DF_OUT 0x00000800 /* Data flow out */ 314 #define HC_EPT_Speed 0x00002000 /* Speed of the endpoint */ 315 #define HC_EPT_sKip 0x00004000 /* Skip bit */ 316 #define HC_EPT_Format 0x00008000 /* Type of transfer */ 317 #define HC_EPT_MPS 0x0EFF0000 /* Max packet size */ 318 #define HC_EPT_8_MPS 0x00080000 /* 8 byte max packet size */ 319 #define HC_EPT_64_MPS 0x00400000 /* 64 byte max packet size */ 320 #define HC_EPT_Halt 0x00000001 /* Halted */ 321 #define HC_EPT_Carry 0x00000002 /* Toggle carry */ 322 323 #define HC_EPT_EP_SHFT 7 /* Bits to shift addr */ 324 #define HC_EPT_MAXPKTSZ 16 /* Bits to shift maxpktsize */ 325 326 #define HC_EPT_TD_TAIL 0xFFFFFFF0 /* TD tail mask */ 327 #define HC_EPT_TD_HEAD 0xFFFFFFF0 /* TD head mask */ 328 #define HC_EPT_NEXT 0xFFFFFFF0 /* Next endpoint mask */ 329 330 /* 331 * hced_state 332 * 333 * ED states 334 */ 335 #define HC_EPT_FREE 1 /* Free ED */ 336 #define HC_EPT_STATIC 2 /* Static ED */ 337 #define HC_EPT_ACTIVE 3 /* Active ED */ 338 339 340 /* 341 * Host Controller Transfer Descriptor 342 * 343 * A Transfer Descriptor (TD) is a memory structure that describes the 344 * information necessary for the Host Controller (HC) to transfer a block 345 * of data to or from a device endpoint. These TD's will be attached to 346 * a Endpoint Descriptor (ED). This structure includes the fields for both 347 * General and Isochronous Transfer Descriptors. The General TDs must be 348 * aligned to 16 byte, where as Isochronous TDs must be aligned to 32 byte. 349 */ 350 typedef volatile struct ohci_td { 351 uint32_t hctd_ctrl; /* See below */ 352 uint32_t hctd_cbp; /* Next buffer addr */ 353 uint32_t hctd_next_td; /* Next TD */ 354 uint32_t hctd_buf_end; /* End of buffer */ 355 uint32_t hctd_offsets[4]; /* Offsets into buf */ 356 /* Used only for isoch */ 357 uint32_t hctd_trans_wrapper; /* Transfer wrapper */ 358 uint32_t hctd_state; /* TD state */ 359 uint32_t hctd_tw_next_td; /* Next TD on TW */ 360 uint32_t hctd_ctrl_phase; /* Control Xfer Phase info */ 361 uint32_t hctd_xfer_offs; /* Starting buffer offset */ 362 uint32_t hctd_xfer_len; /* Transfer length */ 363 uint8_t hctd_pad[8]; /* Required padding */ 364 } ohci_td_t; 365 366 /* 367 * Common hc_td control bits both for the General and Isochronous Transfer 368 * Descriptors. 369 */ 370 #define HC_TD_DI 0x00E00000 /* Delay interrupt */ 371 #define HC_TD_0I 0x00000000 /* 0 frame for interrupt */ 372 #define HC_TD_1I 0x00200000 /* 1 frame for interrupt */ 373 #define HC_TD_2I 0x00400000 /* 2 frame for interrupt */ 374 #define HC_TD_3I 0x00600000 /* 3 frame for interrupt */ 375 #define HC_TD_4I 0x00800000 /* 4 frame's for interrupt */ 376 #define HC_TD_5I 0x00A00000 /* 5 frame for interrupt */ 377 #define HC_TD_6I 0x00C00000 /* 6 frame for interrupt */ 378 #define HC_TD_7I 0x00E00000 /* 7 frame for interrupt */ 379 #define HC_TD_CC 0xF0000000 /* Condition code */ 380 381 #define HC_TD_R 0x00040000 /* Buffer rounding */ 382 #define HC_TD_PID 0x00180000 /* Pid for the token */ 383 #define HC_TD_SETUP 0x00000000 /* Setup direction */ 384 #define HC_TD_IN 0x00100000 /* In direction */ 385 #define HC_TD_OUT 0x00080000 /* Out direction */ 386 #define HC_TD_DT 0x03000000 /* Data Toggle */ 387 #define HC_TD_MS_DT 0x02000000 /* Master data toggle */ 388 #define HC_TD_DT_0 0x00000000 /* Toggle from TD 0 */ 389 #define HC_TD_DT_1 0x01000000 /* Toggle from TD 1 */ 390 #define HC_TD_EC 0x0C000000 /* Error Count */ 391 392 /* 393 * hc_td control bits specific to Isochronous Transfer Descriptors. 394 */ 395 #define HC_ITD_SF 0x0000FFFF /* Starting Frame number */ 396 #define HC_ITD_FC 0x07000000 /* Frame count */ 397 398 #define HC_ITD_FC_SHIFT 24 /* Frame count shift */ 399 #define HC_ITD_PAGE_MASK 0xFFFFF000 400 #define HC_ITD_ODD_OFFSET 0xFFFF0000 /* Odd offset */ 401 #define HC_ITD_EVEN_OFFSET 0x0000FFFF /* Even offset */ 402 #define HC_ITD_OFFSET_SHIFT 16 403 #define HC_ITD_OFFSET_CC 0x0000F000 /* CC of offset or PSW N */ 404 #define HC_ITD_OFFSET_ADDR 0x00000FFF /* Offset N */ 405 #define HC_ITD_4KBOUNDARY_CROSS 0x00001000 /* Set bit 12 for 4k crossing */ 406 407 /* 408 * Condition codes both to General and Isochronous Transfer Descriptors. 409 * Even these condition codes are valid for offsets of the isochronous 410 * transfer descriptos. 411 */ 412 #define HC_TD_CC_NO_E 0x00000000 /* No error */ 413 #define HC_TD_CC_CRC 0x10000000 /* CRC error */ 414 #define HC_TD_CC_BS 0x20000000 /* Bit stuffing */ 415 #define HC_TD_CC_DTM 0x30000000 /* Data Toggle Mismatch */ 416 #define HC_TD_CC_STALL 0x40000000 /* Stall */ 417 #define HC_TD_CC_DNR 0x50000000 /* Device not responding */ 418 #define HC_TD_CC_PCF 0x60000000 /* PID check failure */ 419 #define HC_TD_CC_UPID 0x70000000 /* Unexpected PID */ 420 #define HC_TD_CC_DO 0x80000000 /* Data overrrun */ 421 #define HC_TD_CC_DU 0x90000000 /* Data underrun */ 422 #define HC_TD_CC_BO 0xC0000000 /* Buffer overrun */ 423 #define HC_TD_CC_BU 0xD0000000 /* Buffer underrun */ 424 #define HC_TD_CC_NA 0xF0000000 /* Not accessed */ 425 426 #define HC_TD_NEXT 0xFFFFFFF0 /* Next TD */ 427 428 /* 429 * Condition codes specific to Isochronous Transfer Descriptors. 430 */ 431 #define HC_ITD_CC_SHIFT 16 /* ITD CC shift */ 432 433 /* 434 * hctd_state 435 * 436 * TD States 437 */ 438 #define HC_TD_FREE 1 /* Free TD */ 439 #define HC_TD_DUMMY 2 /* Dummy TD */ 440 #define HC_TD_ACTIVE 3 /* Active TD */ 441 #define HC_TD_TIMEOUT 4 /* Timeouted TD */ 442 #define HC_TD_RECLAIM 5 /* Reclaimed TD */ 443 444 /* 445 * hctd_ctrl_phase 446 * 447 * Control Transfer Phase information 448 */ 449 #define OHCI_CTRL_SETUP_PHASE 1 /* Setup phase */ 450 #define OHCI_CTRL_DATA_PHASE 2 /* Data phase */ 451 #define OHCI_CTRL_STATUS_PHASE 3 /* Status phase */ 452 453 /* 454 * Structure for Isoc DMA buffer 455 * One Isoc transfer includes multiple Isoc packets and need to be 456 * transfered in multiple TDs. 457 * One DMA buffer is allocated for one Isoc TD which may hold up 458 * to eight Isoc packets. 459 */ 460 typedef struct ohci_isoc_buf { 461 caddr_t buf_addr; /* Starting buffer address */ 462 ddi_dma_cookie_t cookie; /* DMA cookie */ 463 ddi_dma_handle_t dma_handle; /* DMA handle */ 464 ddi_acc_handle_t mem_handle; /* Memory handle */ 465 size_t length; /* Buffer length */ 466 uint_t ncookies; /* DMA cookie count */ 467 uint_t index; /* Index of the TD */ 468 } ohci_isoc_buf_t; 469 470 #ifdef __cplusplus 471 } 472 #endif 473 474 #endif /* _SYS_USB_OHCI_H */ 475