1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2006 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #ifndef _SYS_USB_HIDVAR_H 28 #define _SYS_USB_HIDVAR_H 29 30 #pragma ident "%Z%%M% %I% %E% SMI" 31 32 #ifdef __cplusplus 33 extern "C" { 34 #endif 35 36 #include <sys/usb/usba/usbai_private.h> 37 38 /* 39 * HID : This header file contains the internal structures 40 * and variable definitions used in hid driver. 41 */ 42 43 /* 44 * HID USB device state management : 45 * 46 * ONLINE-----1--->SUSPENDED----2---->ONLINE 47 * | 48 * +-----3--->DISCONNECTED----4----->ONLINE 49 * | 50 * +-----7--->POWERED DOWN----8----->POWER CHANGE---9--->ONLINE 51 * | 52 * +---3--->DISCONNECTED 53 * 54 * POWERED DOWN----1--->SUSPENDED------2----->POWERED DOWN 55 * | | ^ 56 * | 5 | 57 * | | 6 58 * | v | 59 * +---------3----->DISCONNECTED-------4----->POWERED DOWN 60 * 61 * 1 = CPR SUSPEND 62 * 2 = CPR RESUME (with original device) 63 * 3 = Device Unplug 64 * 4 = Original Device Plugged in 65 * 5 = CPR RESUME (with device disconnected or with a wrong device) 66 * 6 = CPR SUSPEND on a disconnected device 67 * 7 = Device idles for time T & transitions to low power state 68 * 8 = Remote wakeup by device OR Application kicking off IO to device 69 * This results in a Transistion state till PM calls the power 70 * entry point to raise the power level of the device 71 * 9 = Device entry point called to raise power level of the device 72 * 73 */ 74 75 76 /* Boot protocol values for keyboard and mouse */ 77 #define KEYBOARD_PROTOCOL 0x01 /* legacy keyboard */ 78 #define MOUSE_PROTOCOL 0x02 /* legacy mouse */ 79 80 /* 81 * If the hid descriptor is not valid, the following values are 82 * used. 83 */ 84 #define USBKPSZ 8 /* keyboard packet size */ 85 #define USBMSSZ 3 /* mouse packet size */ 86 #define USB_KB_HID_DESCR_LENGTH 0x3f /* keyboard Report descr length */ 87 #define USB_MS_HID_DESCR_LENGTH 0x32 /* mouse Report descr length */ 88 89 /* 90 * Flags for the default pipe. 91 */ 92 #define HID_DEFAULT_PIPE_BUSY 0x01 93 94 /* 95 * Hid interrupt pipe states. Interrupt pipe 96 * can be in only one of these states : 97 * 98 * open--1-->data_transferring--1-->open 99 * | 100 * |----2---->closed 101 * 102 * 1 = interrupt pipe callback 103 * 2 = hid_close 104 */ 105 #define HID_INTERRUPT_PIPE_CLOSED 0x00 /* Int. pipe is closed */ 106 #define HID_INTERRUPT_PIPE_OPEN 0x01 /* Int. pipe is opened */ 107 108 /* HID mctl processing return codes */ 109 #define HID_SUCCESS 0 /* mctl processed successfully */ 110 #define HID_INPROGRESS 1 /* mctl queued/deferred for execution */ 111 #define HID_ENQUEUE 2 /* mctl queued/deferred for execution */ 112 #define HID_FAILURE -1 /* mctl processing failed */ 113 114 /* Data is being sent up */ 115 #define HID_INTERRUPT_PIPE_DATA_TRANSFERRING 0x03 116 117 /* Attach/detach states */ 118 #define HID_LOCK_INIT 0x01 /* Initial attach state */ 119 #define HID_MINOR_NODES 0x02 /* Set after minor node is created */ 120 121 /* HID Protocol Requests */ 122 #define SET_IDLE 0x0a /* bRequest value to set idle request */ 123 #define DURATION (0<<8) /* no. of repeat reports (HID 7.2.4) */ 124 #define SET_PROTOCOL 0x0b /* bRequest value for boot protocol */ 125 126 /* Hid PM scheme */ 127 typedef enum { 128 HID_PM_ACTIVITY, /* device is power managed by idleness */ 129 HID_PM_OPEN_CLOSE, /* device is busy on open, idle on close */ 130 HID_PM_APPLICATION /* device is power managed by application */ 131 } hid_pm_scheme_t; 132 133 typedef struct hid_power { 134 135 void *hid_state; /* points back to hid_state */ 136 137 int hid_pm_busy; /* device busy accounting */ 138 139 hid_pm_scheme_t hid_pm_strategy; /* device PM */ 140 141 uint8_t hid_wakeup_enabled; 142 143 /* this is the bit mask of the power states that device has */ 144 uint8_t hid_pwr_states; 145 146 /* wakeup and power transistion capabilites of an interface */ 147 uint8_t hid_pm_capabilities; 148 149 /* flag to indicate if driver is about to raise power level */ 150 boolean_t hid_raise_power; 151 152 /* current power level the device is in */ 153 uint8_t hid_current_power; 154 155 /* mblk indicating that the device has powered up */ 156 mblk_t *hid_pm_pwrup; 157 } hid_power_t; 158 159 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_power_t::hid_state)) 160 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_power_t::hid_pm_strategy)) 161 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_power_t::hid_wakeup_enabled)) 162 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_power_t::hid_pwr_states)) 163 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_power_t::hid_pm_capabilities)) 164 165 typedef struct hid_state { 166 dev_info_t *hid_dip; /* per-device info handle */ 167 kmutex_t hid_mutex; /* for general locking */ 168 int hid_instance; /* instance number */ 169 170 minor_t hid_minor; 171 boolean_t hid_km; /* for virtual keyboard/mouse */ 172 ddi_taskq_t *hid_taskq; /* for physical access */ 173 174 /* Attach/detach flags */ 175 int hid_attach_flags; 176 177 /* device state flag */ 178 int hid_dev_state; 179 180 /* outstanding requests on the default pipe */ 181 int hid_default_pipe_req; 182 183 queue_t *hid_rq_ptr; /* pointer to read queue */ 184 queue_t *hid_wq_ptr; /* pointer to write queue */ 185 186 hid_power_t *hid_pm; /* ptr to power struct */ 187 188 usb_client_dev_data_t *hid_dev_data; /* ptr to usb reg struct */ 189 190 usb_dev_descr_t *hid_dev_descr; /* device descriptor. */ 191 192 /* hid driver is attached to this interface */ 193 int hid_interfaceno; 194 195 usb_if_descr_t hid_if_descr; /* interface descr */ 196 usb_hid_descr_t hid_hid_descr; /* hid descriptor */ 197 usb_ep_descr_t hid_ep_intr_descr; 198 hidparser_handle_t hid_report_descr; /* report descr */ 199 200 usb_pipe_handle_t hid_default_pipe; /* default pipe */ 201 usb_pipe_handle_t hid_interrupt_pipe; /* intr pipe handle */ 202 203 int hid_streams_flags; /* see below */ 204 int hid_packet_size; /* data packet size */ 205 206 /* Pipe policy for the interrupt pipe is saved here */ 207 usb_pipe_policy_t hid_intr_pipe_policy; 208 209 /* 210 * This field is only used if the device provides polled input 211 * This is state information for the usba layer. 212 */ 213 usb_console_info_t hid_polled_console_info; 214 215 /* 216 * This is the buffer that the raw characters are stored in. 217 * for polled mode. 218 */ 219 uchar_t *hid_polled_raw_buf; 220 221 /* handle for outputting messages */ 222 usb_log_handle_t hid_log_handle; 223 } hid_state_t; 224 225 /* warlock directives, stable data */ 226 _NOTE(MUTEX_PROTECTS_DATA(hid_state_t::hid_mutex, hid_state_t)) 227 _NOTE(MUTEX_PROTECTS_DATA(hid_state_t::hid_mutex, hid_power_t)) 228 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_state_t::hid_dip)) 229 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_state_t::hid_pm)) 230 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_state_t::hid_dev_data)) 231 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_state_t::hid_instance)) 232 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_state_t::hid_km)) 233 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_state_t::hid_minor)) 234 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_state_t::hid_interrupt_pipe)) 235 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_state_t::hid_ep_intr_descr)) 236 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_state_t::hid_default_pipe)) 237 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_state_t::hid_log_handle)) 238 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_state_t::hid_if_descr)) 239 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_state_t::hid_dev_data)) 240 _NOTE(DATA_READABLE_WITHOUT_LOCK(hid_state_t::hid_dev_descr)) 241 _NOTE(SCHEME_PROTECTS_DATA("stable data", hid_state_t::hid_rq_ptr)) 242 _NOTE(SCHEME_PROTECTS_DATA("stable data", hid_state_t::hid_wq_ptr)) 243 244 _NOTE(SCHEME_PROTECTS_DATA("stable data", usb_ep_descr)) 245 246 247 /* 248 * The hid_polled_console_info field is a handle from usba. The 249 * handle is used when the kernel is in the single thread mode 250 * so the field is tagged with this note. 251 */ 252 _NOTE(SCHEME_PROTECTS_DATA("unique per call", 253 hid_state_t::hid_polled_console_info)) 254 255 /* 256 * structure for argument for callback routine for async 257 * data transfer through default pipe. 258 */ 259 typedef struct hid_default_pipe_argument { 260 261 /* Message to be sent up to the stream */ 262 struct iocblk hid_default_pipe_arg_mctlmsg; 263 264 /* Pointer to hid_state structure */ 265 hid_state_t *hid_default_pipe_arg_hidp; 266 267 /* Pointer to the original mblk_t received from hid_wput() */ 268 mblk_t *hid_default_pipe_arg_mblk; 269 270 /* Request that caused this callback to happen */ 271 uchar_t hid_default_pipe_arg_bRequest; 272 273 } hid_default_pipe_arg_t; 274 275 /* 276 * An instance of this structure is created per command down to the 277 * device. The control callback is not executed until the call is 278 * made into usba, so there is no danger of a callback happening when 279 * the fields of the structure are being set. 280 */ 281 _NOTE(SCHEME_PROTECTS_DATA("unique per call", hid_default_pipe_arg_t)) 282 283 /* 284 * An instance of this structure is created per command down to the 285 * device. The callback is not executed until the call is 286 * made into usba, so there is no danger of a callback happening when 287 * the fields of the structure are being set. 288 */ 289 290 /* Value for hid_streams_flags */ 291 #define HID_STREAMS_OPEN 0x00000001 /* Streams are open */ 292 #define HID_STREAMS_DISMANTLING 0x00000002 /* In hid_close() */ 293 294 #define HID_BAD_DESCR 0x01 /* Bad hid report descriptor */ 295 296 #define HID_MINOR_NAME_LEN 20 /* Max length of minor_name string */ 297 298 /* hid_close will wait 60 secons for callbacks to be over */ 299 #define HID_CLOSE_WAIT_TIMEOUT 10 300 301 /* define a timeout for draining requests on the default control pipe */ 302 #define HID_DEFAULT_PIPE_DRAIN_TIMEOUT 5 303 304 /* To support PM on SUN mice of later revisions */ 305 #define HID_SUN_MOUSE_VENDOR_ID 0x0430 306 #define HID_SUN_MOUSE_PROD_ID 0x0100 307 #define HID_SUN_MOUSE_BCDDEVICE 0x0105 /* and later revisions */ 308 309 310 /* 311 * Debug message Masks 312 */ 313 #define PRINT_MASK_ATTA 0x00000001 314 #define PRINT_MASK_OPEN 0x00000002 315 #define PRINT_MASK_CLOSE 0x00000004 316 #define PRINT_MASK_EVENTS 0x00000008 317 #define PRINT_MASK_PM 0x00000010 318 #define PRINT_MASK_ALL 0xFFFFFFFF 319 320 /* 321 * Define states local to hid driver 322 */ 323 #define USB_DEV_HID_POWER_CHANGE 0x80 324 325 /* define for retrying control requests */ 326 #define HID_RETRY 10 327 328 #ifdef __cplusplus 329 } 330 #endif 331 332 #endif /* _SYS_USB_HIDVAR_H */ 333