xref: /illumos-gate/usr/src/uts/common/sys/smbios_impl.h (revision d48be21240dfd051b689384ce2b23479d757f2d8)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2015 OmniTI Computer Consulting, Inc.  All rights reserved.
24  * Copyright (c) 2018, Joyent, Inc.
25  * Copyright 2022 Oxide Computer Company
26  * Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
27  * Use is subject to license terms.
28  */
29 
30 /*
31  * This header file defines the implementation structures for the SMBIOS access
32  * library, libsmbios, and an equivalent kernel module.  Clients should use
33  * the <smbios.h> or <sys/smbios.h> header files to access DMTF SMBIOS
34  * information, NOT these underlying implementation structures from the spec.
35  * In short, do not user this header file or these routines for any purpose.
36  */
37 
38 #ifndef	_SYS_SMBIOS_IMPL_H
39 #define	_SYS_SMBIOS_IMPL_H
40 
41 #include <sys/smbios.h>
42 #include <sys/sysmacros.h>
43 
44 #ifdef _KERNEL
45 #include <sys/systm.h>
46 #else
47 #include <strings.h>
48 #include <stddef.h>
49 #endif
50 
51 #ifdef	__cplusplus
52 extern "C" {
53 #endif
54 
55 /*
56  * Definitions required to interpret the BIOS type information.
57  */
58 #define	SMB_BIOSXB_EXTROM	6
59 
60 #define	SMB_BIOS_EXTROM_VALUE_MASK(x)	((x) & 0x3fff)
61 #define	SMB_BIOS_EXTROM_SHIFT_MASK(x)	(((x) & 0xc000) >> 14)
62 
63 #pragma pack(1)
64 
65 typedef struct smb_header {
66 	uint8_t smbh_type;		/* structure type (SMB_TYPE_* value) */
67 	uint8_t smbh_len;		/* length in bytes of formatted area */
68 	uint16_t smbh_hdl;		/* structure handle */
69 } smb_header_t;
70 
71 /*
72  * SMBIOS implementation structure for SMB_TYPE_BIOS.
73  */
74 typedef struct smb_bios {
75 	smb_header_t smbbi_hdr;		/* structure header */
76 	uint8_t smbbi_vendor;		/* bios vendor string */
77 	uint8_t smbbi_version;		/* bios version string */
78 	uint16_t smbbi_segment;		/* segment location of bios address */
79 	uint8_t smbbi_reldate;		/* bios release date */
80 	uint8_t smbbi_romsize;		/* bios rom size (64k * (n + 1)) */
81 	uint64_t smbbi_cflags;		/* bios characteristics */
82 	uint8_t smbbi_xcflags[1];	/* bios characteristics extensions */
83 } smb_bios_t;
84 
85 /*
86  * SMBIOS implementation structure for SMB_TYPE_SYSTEM.
87  */
88 typedef struct smb_system {
89 	smb_header_t smbsi_hdr;		/* structure header */
90 	uint8_t smbsi_manufacturer;	/* manufacturer */
91 	uint8_t smbsi_product;		/* product name */
92 	uint8_t smbsi_version;		/* version */
93 	uint8_t smbsi_serial;		/* serial number */
94 	uint8_t smbsi_uuid[16];		/* UUID */
95 	uint8_t smbsi_wakeup;		/* wake-up type */
96 	uint8_t smbsi_sku;		/* SKU number */
97 	uint8_t smbsi_family;		/* family */
98 } smb_system_t;
99 
100 /*
101  * SMBIOS implementation structure for SMB_TYPE_BASEBOARD.
102  */
103 typedef struct smb_bboard {
104 	smb_header_t smbbb_hdr;		/* structure header */
105 	uint8_t smbbb_manufacturer;	/* manufacturer */
106 	uint8_t smbbb_product;		/* product name */
107 	uint8_t smbbb_version;		/* version */
108 	uint8_t smbbb_serial;		/* serial number */
109 	uint8_t smbbb_asset;		/* asset tag */
110 	uint8_t smbbb_flags;		/* feature flags */
111 	uint8_t smbbb_location;		/* location in chassis */
112 	uint16_t smbbb_chassis;		/* chassis handle */
113 	uint8_t smbbb_type;		/* board type */
114 	uint8_t smbbb_cn;		/* number of contained handles */
115 	uint16_t smbbb_cv[1];		/* array of contained handles */
116 } smb_bboard_t;
117 
118 /*
119  * SMBIOS implementation structure for SMB_TYPE_CHASSIS.
120  */
121 typedef struct smb_chassis {
122 	smb_header_t smbch_hdr;		/* structure header */
123 	uint8_t smbch_manufacturer;	/* manufacturer */
124 	uint8_t smbch_type;		/* type */
125 	uint8_t smbch_version;		/* version */
126 	uint8_t smbch_serial;		/* serial number */
127 	uint8_t smbch_asset;		/* asset tag */
128 	uint8_t smbch_bustate;		/* boot-up state */
129 	uint8_t smbch_psstate;		/* power supply state */
130 	uint8_t smbch_thstate;		/* thermal state */
131 	uint8_t smbch_security;		/* security state */
132 	uint32_t smbch_oemdata;		/* OEM-specific data */
133 	uint8_t smbch_uheight;		/* enclosure height */
134 	uint8_t smbch_cords;		/* number of power cords */
135 	uint8_t smbch_cn;		/* number of contained records */
136 	uint8_t smbch_cm;		/* size of contained records */
137 	uint8_t smbch_cv[];		/* array of contained records */
138 } smb_chassis_t;
139 
140 #define	SMB_CHT_LOCK	0x80		/* lock bit within smbch_type */
141 
142 typedef struct smb_chassis_entry {
143 	uint8_t	smbce_type;		/* Containing Element and Type */
144 	uint8_t	smbce_min;		/* minimum number of elt */
145 	uint8_t	smbce_max;		/* minimum number of elt */
146 } smb_chassis_entry_t;
147 
148 #define	SMB_CHE_TYPE_IS_SMB(x)	(((x) & 0x80) ==  0x80)
149 #define	SMB_CHE_TYPE_TYPE(x)	(((x) & 0x7f))
150 
151 /*
152  * SMBIOS implementation structure for SMB_TYPE_PROCESSOR.
153  */
154 typedef struct smb_processor {
155 	smb_header_t smbpr_hdr;		/* structure header */
156 	uint8_t smbpr_socket;		/* socket designation */
157 	uint8_t smbpr_type;		/* processor type (see <smbios.h>) */
158 	uint8_t smbpr_family;		/* processor family (see <smbios.h>) */
159 	uint8_t smbpr_manufacturer;	/* manufacturer */
160 	uint64_t smbpr_cpuid;		/* processor cpuid information */
161 	uint8_t smbpr_version;		/* version */
162 	uint8_t smbpr_voltage;		/* voltage */
163 	uint16_t smbpr_clkspeed;	/* external clock speed in MHz */
164 	uint16_t smbpr_maxspeed;	/* maximum speed in MHz */
165 	uint16_t smbpr_curspeed;	/* current speed in MHz */
166 	uint8_t smbpr_status;		/* status (see <smbios.h>) */
167 	uint8_t smbpr_upgrade;		/* upgrade */
168 	uint16_t smbpr_l1cache;		/* L1 cache handle (if any) */
169 	uint16_t smbpr_l2cache;		/* L2 cache handle (if any) */
170 	uint16_t smbpr_l3cache;		/* L3 cache handle (if any) */
171 	uint8_t smbpr_serial;		/* serial number */
172 	uint8_t smbpr_asset;		/* asset tag */
173 	uint8_t smbpr_part;		/* part number */
174 	uint8_t smbpr_corecount;	/* number of cores per socket */
175 	uint8_t smbpr_coresenabled;	/* number of enabled cores per socket */
176 	uint8_t smbpr_threadcount;	/* number of threads per socket */
177 	uint16_t smbpr_cflags;	/* cpu characteristics (see <smbios.h>) */
178 	uint16_t smbpr_family2;		/* processor family2 (see <smbios.h>) */
179 	uint16_t smbpr_corecount2;	/* second number of cores per socket */
180 	uint16_t smbpr_coresenabled2;	/* second number of enabled cores */
181 	uint16_t smbpr_threadcount2;	/* second number of enabled threads */
182 	uint16_t smpbr_threaden;	/* enabled thread count */
183 } smb_processor_t;
184 
185 /*
186  * SMBIOS implementation structure for SMB_TYPE_CACHE.
187  */
188 typedef struct smb_cache {
189 	smb_header_t smbca_hdr;		/* structure header */
190 	uint8_t smbca_socket;		/* socket designation */
191 	uint16_t smbca_config;		/* cache configuration */
192 	uint16_t smbca_maxsize;		/* maximum installed size */
193 	uint16_t smbca_size;		/* installed size */
194 	uint16_t smbca_stype;		/* supported SRAM type */
195 	uint16_t smbca_ctype;		/* current SRAM type */
196 	uint8_t smbca_speed;		/* speed in nanoseconds */
197 	uint8_t smbca_etype;		/* error correction type */
198 	uint8_t smbca_ltype;		/* logical cache type */
199 	uint8_t smbca_assoc;		/* associativity */
200 	uint32_t smbca_maxsize2;	/* maximum installed size 2 */
201 	uint32_t smbca_size2;		/* installed size 2 */
202 } smb_cache_t;
203 
204 /*
205  * Convert encoded cache size to bytes: DSP0134 Section 7.8 explains the
206  * encoding.  The highest bit is 0 for 1k units, 1 for 64k units, and this
207  * macro decodes the value into bytes for exporting to our clients.
208  */
209 #define	SMB_CACHE_SIZE(s)	(((s) & 0x8000) ? \
210 	((uint32_t)((s) & 0x7FFF) * 64 * 1024) : ((uint32_t)(s) * 1024))
211 
212 #define	SMB_CACHE_EXT_SIZE(s)	(((s) & 0x80000000U) ?	\
213 	((uint64_t)((s) & 0x7FFFFFFFULL) * 64ULL * 1024ULL) :	\
214 	((uint64_t)(s) * 1024ULL))
215 
216 #define	SMB_CACHE_CFG_MODE(c)		(((c) >> 8) & 3)
217 #define	SMB_CACHE_CFG_ENABLED(c)	(((c) >> 7) & 1)
218 #define	SMB_CACHE_CFG_LOCATION(c)	(((c) >> 5) & 3)
219 #define	SMB_CACHE_CFG_SOCKETED(c)	(((c) >> 3) & 1)
220 #define	SMB_CACHE_CFG_LEVEL(c)		(((c) & 7) + 1)
221 
222 /*
223  * SMBIOS implementation structure for SMB_TYPE_PORT.
224  */
225 typedef struct smb_port {
226 	smb_header_t smbpo_hdr;		/* structure header */
227 	uint8_t smbpo_iref;		/* internal reference designator */
228 	uint8_t smbpo_itype;		/* internal connector type */
229 	uint8_t smbpo_eref;		/* external reference designator */
230 	uint8_t smbpo_etype;		/* external connector type */
231 	uint8_t smbpo_ptype;		/* port type */
232 } smb_port_t;
233 
234 /*
235  * SMBIOS implementation structure for SMB_TYPE_SLOT.
236  */
237 typedef struct smb_slot_peer {
238 	uint16_t smbspb_group_no;	/* segment group number */
239 	uint8_t smbspb_bus;		/* bus number */
240 	uint8_t smbspb_df;		/* device/function number */
241 	uint8_t smbspb_width;		/* electrical width */
242 } smb_slot_peer_t;
243 
244 typedef struct smb_slot {
245 	smb_header_t smbsl_hdr;		/* structure header */
246 	uint8_t smbsl_name;		/* reference designation */
247 	uint8_t smbsl_type;		/* slot type */
248 	uint8_t smbsl_width;		/* slot data bus width */
249 	uint8_t smbsl_usage;		/* current usage */
250 	uint8_t smbsl_length;		/* slot length */
251 	uint16_t smbsl_id;		/* slot ID */
252 	uint8_t smbsl_ch1;		/* slot characteristics 1 */
253 	uint8_t smbsl_ch2;		/* slot characteristics 2 */
254 	uint16_t smbsl_sg;		/* segment group number */
255 	uint8_t smbsl_bus;		/* bus number */
256 	uint8_t smbsl_df;		/* device/function number */
257 	/* Added in SMBIOS 3.2+ */
258 	uint8_t	smbsl_dbw;		/* Data bus width */
259 	uint8_t	smbsl_npeers;		/* Peer bdf groups */
260 	smb_slot_peer_t smbsl_peers[];	/* bifurcation peers */
261 	/* There are later additions in 3.4+, see smbios_slot_cont_t */
262 } smb_slot_t;
263 
264 /*
265  * After the variable number of smbsl_peers, the smbios_slot has continued in
266  * size and has the following members defined as of version 3.4. These occur
267  * starting at byte 14 + 5 * smbsl_npeers.
268  */
269 typedef struct smb_slot_cont {
270 	uint8_t smbsl_info;		/* slot info */
271 	uint8_t smbsl_pwidth;		/* slot physical width */
272 	uint16_t smbsl_pitch;		/* slot pitch */
273 	/* Added in SMBIOS 3.5 */
274 	uint8_t smbsl_height;		/* slot height */
275 } smb_slot_cont_t;
276 
277 /*
278  * The first byte that the smb_slot_cont_t is defined to start at. Note, this
279  * was originally indicated to be 0x14 in the SMBIOS 3.4 specification. This has
280  * been noted as an errata. Right now we assume that most things have the
281  * updated behavior in SMBIOS 3.5. However, if we encounter things in the wild
282  * that have the other offset then we will need to condition this on 3.4.
283  */
284 #define	SMB_SLOT_CONT_START	0x13
285 
286 /*
287  * SMBIOS implementation structure for SMB_TYPE_OBDEVS.
288  */
289 typedef struct smb_obdev {
290 	uint8_t smbob_type;		/* encoded type and enable bit */
291 	uint8_t smbob_name;		/* description string */
292 } smb_obdev_t;
293 
294 #define	SMB_OBT_ENABLED		0x80	/* enable bit within smbob_type */
295 
296 /*
297  * SMBIOS implementation structure for SMB_TYPE_OEMSTR, SMB_TYPE_SYSCONFSTR,
298  * and SMB_TYPE_LANG.
299  */
300 typedef struct smb_strtab {
301 	smb_header_t smbtb_hdr;		/* structure header */
302 	uint8_t smbtb_count;		/* number of strings */
303 } smb_strtab_t;
304 
305 /*
306  * SMBIOS implementation structure for SMB_TYPE_LANG.
307  */
308 typedef struct smb_lang {
309 	smb_header_t smblang_hdr;	/* structure header */
310 	uint8_t smblang_num;		/* number of installed languages */
311 	uint8_t smblang_flags;		/* flags */
312 	uint8_t smblang_resv[15];	/* reserved for future use */
313 	uint8_t smblang_cur;		/* current language string */
314 } smb_lang_t;
315 
316 /*
317  * SMBIOS implementation structure for SMB_TYPE_EVENTLOG.
318  */
319 typedef struct smb_sel {
320 	smb_header_t smbsel_hdr;	/* structure header */
321 	uint16_t smbsel_len;		/* log area length */
322 	uint16_t smbsel_hdroff;		/* header offset */
323 	uint16_t smbsel_dataoff;	/* data offset */
324 	uint8_t smbsel_method;		/* access method */
325 	uint8_t smbsel_status;		/* status flags */
326 	uint32_t smbsel_token;		/* change token */
327 	uint32_t smbsel_addr;		/* access method address */
328 	uint8_t smbsel_format;		/* header format */
329 	uint8_t smbsel_typec;		/* number of type descriptors */
330 	uint8_t smbsel_typesz;		/* size of each type descriptor */
331 	uint8_t smbsel_typev[1];	/* array of type descriptors */
332 } smb_sel_t;
333 
334 /*
335  * SMBIOS implementation structure for SMB_TYPE_MEMARRAY.
336  */
337 typedef struct smb_memarray {
338 	smb_header_t smbmarr_hdr;	/* structure header */
339 	uint8_t smbmarr_loc;		/* location */
340 	uint8_t smbmarr_use;		/* use */
341 	uint8_t smbmarr_ecc;		/* error detect/correct mechanism */
342 	uint32_t smbmarr_cap;		/* maximum capacity */
343 	uint16_t smbmarr_err;		/* error handle */
344 	uint16_t smbmarr_ndevs;		/* number of slots or sockets */
345 	uint64_t smbmarr_extcap;	/* extended maximum capacity */
346 } smb_memarray_t;
347 
348 /*
349  * SMBIOS implementation structure for SMB_TYPE_MEMARRAYMAP.
350  */
351 typedef struct smb_memarrmap {
352 	smb_header_t smbamap_hdr;	/* structure header */
353 	uint32_t smbamap_start;		/* starting address in kilobytes */
354 	uint32_t smbamap_end;		/* ending address in kilobytes */
355 	uint16_t smbamap_array;		/* physical memory array handle */
356 	uint8_t smbamap_width;		/* partition width */
357 	uint64_t smbamap_extstart;	/* extended starting address in bytes */
358 	uint64_t smbamap_extend;	/* extended ending address in bytes */
359 } smb_memarrmap_t;
360 
361 /*
362  * SMBIOS implementation structure for SMB_TYPE_MEMDEVICE.
363  */
364 typedef struct smb_memdevice {
365 	smb_header_t smbmdev_hdr;	/* structure header */
366 	uint16_t smbmdev_array;		/* array handle */
367 	uint16_t smbmdev_error;		/* error handle */
368 	uint16_t smbmdev_twidth;	/* total width */
369 	uint16_t smbmdev_dwidth;	/* data width */
370 	uint16_t smbmdev_size;		/* size in either K or MB */
371 	uint8_t smbmdev_form;		/* form factor */
372 	uint8_t smbmdev_set;		/* device set */
373 	uint8_t smbmdev_dloc;		/* device locator */
374 	uint8_t smbmdev_bloc;		/* bank locator */
375 	uint8_t smbmdev_type;		/* memory type */
376 	uint16_t smbmdev_flags;		/* detail flags */
377 	uint16_t smbmdev_speed;		/* speed in MT/s */
378 	uint8_t smbmdev_manufacturer;	/* manufacturer */
379 	uint8_t smbmdev_serial;		/* serial number */
380 	uint8_t smbmdev_asset;		/* asset tag */
381 	uint8_t smbmdev_part;		/* part number */
382 	uint8_t smbmdev_attrs;		/* attributes */
383 	uint32_t smbmdev_extsize;	/* extended size */
384 	uint16_t smbmdev_clkspeed;	/* configured clock speed */
385 	uint16_t smbmdev_minvolt;	/* minimum voltage */
386 	uint16_t smbmdev_maxvolt;	/* maximum voltage */
387 	uint16_t smbmdev_confvolt;	/* configured voltage */
388 	/* Added in SMBIOS 3.2 */
389 	uint8_t smbmdev_memtech;	/* memory technology */
390 	uint16_t smbmdev_opmode;	/* memory operating mode capability */
391 	uint8_t smbmdev_fwver;		/* firmware version */
392 	uint16_t smbmdev_modulemfgid;	/* module manufacturer ID */
393 	uint16_t smbmdev_moduleprodid;	/* module product ID */
394 	uint16_t smbmdev_memsysmfgid;	/* memory controller manufacturer id */
395 	uint16_t smbmdev_memsysprodid;	/* memory controller product id */
396 	uint64_t smbmdev_nvsize;	/* non-volatile memory size */
397 	uint64_t smbmdev_volsize;	/* volatile memory size */
398 	uint64_t smbmdev_cachesize;	/* cache size */
399 	uint64_t smbmdev_logicalsize;	/* logical size */
400 	/* Added in SMBIOS 3.3 */
401 	uint32_t smbmdev_extspeed;	/* Extended device speed */
402 	uint32_t smbmdev_extclkspeed;	/* Extended clock speed */
403 } smb_memdevice_t;
404 
405 #define	SMB_MDS_KBYTES		0x8000	/* size in specified in kilobytes */
406 
407 /*
408  * SMBIOS implementation structure for SMB_TYPE_MEMDEVICEMAP.
409  */
410 typedef struct smb_memdevmap {
411 	smb_header_t smbdmap_hdr;	/* structure header */
412 	uint32_t smbdmap_start;		/* starting address in kilobytes */
413 	uint32_t smbdmap_end;		/* ending address in kilobytes */
414 	uint16_t smbdmap_device;	/* memory device handle */
415 	uint16_t smbdmap_array;		/* memory array mapped address handle */
416 	uint8_t smbdmap_rpos;		/* row position */
417 	uint8_t smbdmap_ipos;		/* interleave position */
418 	uint8_t smbdmap_idepth;		/* interleave depth */
419 	uint64_t smbdmap_extstart;	/* extended starting address */
420 	uint64_t smbdmap_extend;	/* extended ending address */
421 } smb_memdevmap_t;
422 
423 typedef struct smb_pointdev {
424 	smb_header_t smbpdev_hdr;	/* structure header */
425 	uint8_t smbpdev_type;		/* device type */
426 	uint8_t smbpdev_iface;		/* device interface */
427 	uint8_t smbpdev_nbuttons;	/* number of buttons */
428 } smb_pointdev_t;
429 
430 /*
431  * SMBIOS implementation structure for SMB_TYPE_BATTERY.
432  */
433 typedef struct smb_battery {
434 	smb_header_t smbbat_hdr;	/* structure header */
435 	uint8_t smbbat_loc;		/* location */
436 	uint8_t smbbat_manufacturer;	/* manufacturer */
437 	uint8_t smbbat_date;		/* manufacture date */
438 	uint8_t smbbat_serial;		/* serial number */
439 	uint8_t smbbat_devname;		/* device name */
440 	uint8_t smbbat_chem;		/* device chemistry */
441 	uint16_t smbbat_cap;		/* design capacity in mW hours */
442 	uint16_t smbbat_volt;		/* design voltage in mV */
443 	uint8_t smbbat_version;		/* SBDS version string */
444 	uint8_t smbbat_err;		/* error percentage */
445 	uint16_t smbbat_ssn;		/* SBDS serial number */
446 	uint16_t smbbat_sdate;		/* SBDS manufacture date */
447 	uint8_t smbbat_schem;		/* SBDS chemistry string */
448 	uint8_t smbbat_mult;		/* design capacity multiplier */
449 	uint32_t smbbat_oemdata;	/* OEM-specific data */
450 } smb_battery_t;
451 
452 /*
453  * SMBIOS implementation structure for SMB_TYPE_SECURITY.
454  */
455 typedef struct smb_hwsec {
456 	smb_header_t smbhs_hdr;		/* structure header */
457 	uint8_t smbhs_settings;		/* settings byte */
458 } smb_hwsec_t;
459 
460 #define	SMB_HWS_PWR_PS(x)	(((x) & 0xC0) >> 6)
461 #define	SMB_HWS_KBD_PS(x)	(((x) & 0x30) >> 4)
462 #define	SMB_HWS_ADM_PS(x)	(((x) & 0x0C) >> 2)
463 #define	SMB_HWS_PAN_PS(x)	(((x) & 0x03) >> 0)
464 
465 /*
466  * SMBIOS implementation structure for SMB_TYPE_VPROBE.
467  */
468 typedef struct smb_vprobe {
469 	smb_header_t smbvpr_hdr;	/* structure header */
470 	uint8_t smbvpr_descr;		/* description string */
471 	uint8_t smbvpr_locstat;		/* location and status */
472 	uint16_t smbvpr_maxval;		/* maximum voltage */
473 	uint16_t smbvpr_minval;		/* minimum voltage */
474 	uint16_t smbvpr_resolution;	/* probe resolution */
475 	uint16_t smbvpr_tolerance;	/* probe tolerance */
476 	uint16_t smbvpr_accuracy;	/* probe accuracy */
477 	uint32_t smbvpr_oem;		/* vendor-specific data */
478 	uint16_t smbvpr_nominal;	/* nominal value */
479 } smb_vprobe_t;
480 
481 #define	SMB_VPROBE_MINLEN		0x14
482 #define	SMB_VPROBE_NOMINAL_MINLEN	0x16
483 
484 #define	SMB_VPROBE_LOCATION(x)	((x) & 0x1f)
485 #define	SMB_VPROBE_STATUS(x)	(((x) >> 5) & 0x7)
486 
487 /*
488  * SMBIOS implementation structure for SMB_TYPE_COOLDEV.
489  */
490 typedef struct smb_cooldev {
491 	smb_header_t smbcdev_hdr;	/* structure header */
492 	uint16_t smbcdev_tprobe;	/* temperature probe */
493 	uint8_t smbcdev_typstat;	/* type and status */
494 	uint8_t smbcdev_group;		/* group identifier */
495 	uint32_t smbcdev_oem;		/* vendor-specific data */
496 	uint16_t smbcdev_nominal;	/* nominal value */
497 	uint8_t smbcdev_descr;		/* description string */
498 } smb_cooldev_t;
499 
500 #define	SMB_COOLDEV_MINLEN		0x0c
501 #define	SMB_COOLDEV_NOMINAL_MINLEN	0x0e
502 #define	SMB_COOLDEV_DESCR_MINLEN	0x0f
503 
504 #define	SMB_COOLDEV_TYPE(x)	((x) & 0x1f)
505 #define	SMB_COOLDEV_STATUS(x)	(((x) >> 5) & 0x7)
506 
507 /*
508  * SMBIOS implementation structure for SMB_TYPE_TPROBE.
509  */
510 typedef struct smb_tprobe {
511 	smb_header_t smbtpr_hdr;	/* structure header */
512 	uint8_t smbtpr_descr;		/* description string */
513 	uint8_t smbtpr_locstat;		/* location and status */
514 	uint16_t smbtpr_maxval;		/* maximum temperature */
515 	uint16_t smbtpr_minval;		/* minimum temperature */
516 	uint16_t smbtpr_resolution;	/* probe resolution */
517 	uint16_t smbtpr_tolerance;	/* probe tolerance */
518 	uint16_t smbtpr_accuracy;	/* probe accuracy */
519 	uint32_t smbtpr_oem;		/* vendor-specific data */
520 	uint16_t smbtpr_nominal;	/* nominal value */
521 } smb_tprobe_t;
522 
523 #define	SMB_TPROBE_MINLEN		0x14
524 #define	SMB_TPROBE_NOMINAL_MINLEN	0x16
525 
526 #define	SMB_TPROBE_LOCATION(x)	((x) & 0x1f)
527 #define	SMB_TPROBE_STATUS(x)	(((x) >> 5) & 0x7)
528 
529 /*
530  * SMBIOS implementation structure for SMB_TYPE_IPROBE.
531  */
532 typedef struct smb_iprobe {
533 	smb_header_t smbipr_hdr;	/* structure header */
534 	uint8_t smbipr_descr;		/* description string */
535 	uint8_t smbipr_locstat;		/* location and status */
536 	uint16_t smbipr_maxval;		/* maximum current */
537 	uint16_t smbipr_minval;		/* minimum current */
538 	uint16_t smbipr_resolution;	/* probe resolution */
539 	uint16_t smbipr_tolerance;	/* probe tolerance */
540 	uint16_t smbipr_accuracy;	/* probe accuracy */
541 	uint32_t smbipr_oem;		/* vendor-specific data */
542 	uint16_t smbipr_nominal;	/* nominal value */
543 } smb_iprobe_t;
544 
545 #define	SMB_IPROBE_MINLEN		0x14
546 #define	SMB_IPROBE_NOMINAL_MINLEN	0x16
547 
548 #define	SMB_IPROBE_LOCATION(x)	((x) & 0x1f)
549 #define	SMB_IPROBE_STATUS(x)	(((x) >> 5) & 0x7)
550 
551 /*
552  * SMBIOS implementation structure for SMB_TYPE_BOOT.
553  */
554 typedef struct smb_boot {
555 	smb_header_t smbbo_hdr;		/* structure header */
556 	uint8_t smbbo_pad[6];		/* reserved for future use */
557 	uint8_t smbbo_status[1];	/* variable-length status buffer */
558 } smb_boot_t;
559 
560 /*
561  * SMBIOS implementation structure for SMB_TYPE_IPMIDEV.
562  */
563 typedef struct smb_ipmi {
564 	smb_header_t smbipm_hdr;	/* structure header */
565 	uint8_t smbipm_type;		/* interface type */
566 	uint8_t smbipm_spec;		/* specification revision */
567 	uint8_t smbipm_i2c;		/* i2C slave address */
568 	uint8_t smbipm_bus;		/* NV storage device bus ID */
569 	uint64_t smbipm_addr;		/* base address */
570 	uint8_t smbipm_info;		/* base address modifier/intr info */
571 	uint8_t smbipm_intr;		/* interrupt number */
572 } smb_ipmi_t;
573 
574 #define	SMB_IPM_SPEC_MAJOR(x)	(((x) & 0xF0) >> 4)
575 #define	SMB_IPM_SPEC_MINOR(x)	((x) & 0x0F)
576 
577 #define	SMB_IPM_ADDR_IO		1ULL
578 
579 #define	SMB_IPM_INFO_REGS(x)	(((x) & 0xC0) >> 6)
580 #define	SMB_IPM_INFO_LSB(x)	(((x) & 0x10) >> 4)
581 #define	SMB_IPM_INFO_ISPEC(x)	(((x) & 0x08) >> 3)
582 #define	SMB_IPM_INFO_IPOL(x)	(((x) & 0x02) >> 1)
583 #define	SMB_IPM_INFO_IMODE(x)	(((x) & 0x01) >> 0)
584 
585 #define	SMB_IPM_REGS_1B		0
586 #define	SMB_IPM_REGS_4B		1
587 #define	SMB_IPM_REGS_16B	2
588 
589 #define	SMB_IPM_IPOL_LO		0
590 #define	SMB_IPM_IPOL_HI		1
591 
592 #define	SMB_IPM_IMODE_EDGE	0
593 #define	SMB_IPM_IMODE_LEVEL	1
594 
595 /*
596  * SMBIOS implementation structure for SMB_TYPE_POWERSUP.
597  */
598 typedef struct smb_powersup {
599 	smb_header_t smbpsup_hdr;	/* structure header */
600 	uint8_t smbpsup_group;		/* group id */
601 	uint8_t smbpsup_loc;		/* location tag */
602 	uint8_t smbpsup_devname;	/* device name */
603 	uint8_t smbpsup_manufacturer;	/* manufacturer */
604 	uint8_t smbpsup_serial;		/* serial number */
605 	uint8_t smbpsup_asset;		/* asset tag */
606 	uint8_t smbpsup_part;		/* part number */
607 	uint8_t smbpsup_rev;		/* revision string */
608 	uint16_t smbpsup_max;		/* max output in milliwatts */
609 	uint16_t smbpsup_char;		/* characteristics */
610 	uint16_t smbpsup_vprobe;	/* voltage probe handle */
611 	uint16_t smbpsup_cooldev;	/* cooling device handle */
612 	uint16_t smbpsup_iprobe;	/* current probe handle */
613 } smb_powersup_t;
614 
615 #define	SMB_PSU_CHARS_ISHOT(x)		((x) & 0x01)
616 #define	SMB_PSU_CHARS_ISPRES(x)		((x) & 0x02)
617 #define	SMB_PSU_CHARS_ISUNPLUG(x)	((x) & 0x04)
618 #define	SMB_PSU_CHARS_IVRS(x)		(((x) >> 3) & 0xf)
619 #define	SMB_PSU_CHARS_STATUS(x)		(((x) >> 7) & 0x7)
620 #define	SMB_PSU_CHARS_TYPE(x)		(((x) >> 10) & 0xf)
621 
622 /*
623  * SMBIOS implementation structure for SMB_TYPE_OBDEVEXT.
624  */
625 typedef struct smb_obdev_ext {
626 	smb_header_t smbobe_hdr;	/* structure header */
627 	uint8_t smbobe_name;		/* reference designation */
628 	uint8_t smbobe_dtype;		/* device type */
629 	uint8_t smbobe_dti;		/* device type instance */
630 	uint16_t smbobe_sg;		/* segment group number */
631 	uint8_t smbobe_bus;		/* bus number */
632 	uint8_t smbobe_df;		/* device/function number */
633 } smb_obdev_ext_t;
634 
635 /*
636  * SMBIOS implementation structure for SMB_TYPE_PROCESSOR_INFO
637  */
638 typedef struct smb_processor_info {
639 	smb_header_t smbpai_hdr;	/* structure handle */
640 	uint16_t smbpai_proc;		/* processor handle */
641 	uint8_t smbpai_len;		/* length of processor specific data */
642 	uint8_t smbpai_type;		/* processor type */
643 	uint8_t smbpai_data[];		/* processor-specific block */
644 } smb_processor_info_t;
645 
646 typedef struct smb_processor_info_riscv {
647 	uint16_t smbpairv_vers;		/* structure revision */
648 	uint8_t smbpairv_len;		/* length of structure */
649 	uint8_t smbpairv_hartid[16];	/* id of the hart */
650 	uint8_t smbpairv_boot;		/* boot hart */
651 	uint8_t smbpairv_vendid[16];	/* machine vendor id */
652 	uint8_t smbpairv_archid[16];	/* arch vendor id */
653 	uint8_t smbpairv_machid[16];	/* machine impl id */
654 	uint32_t smbpairv_isa;		/* supported ISA */
655 	uint8_t smbpairv_privlvl;		/* supported privilege levels */
656 	uint8_t smbpairv_metdi[16];	/* Machine exception trap delegation */
657 	uint8_t smbpairv_mitdi[16];	/* Machine interrupt trap delegation */
658 	uint8_t smbpairv_xlen;		/* Register width */
659 	uint8_t smbpairv_mxlen;		/* Machine register width */
660 	uint8_t smbpairv_rsvd;		/* Reserved */
661 	uint8_t smbpairv_sxlen;		/* Supervisor register width */
662 	uint8_t smbpairv_uxlen;		/* User register width */
663 } smb_processor_info_riscv_t;
664 
665 /*
666  * SMBIOS implementation structure for SMBIOS_TYPE_FWINFO.
667  */
668 typedef struct smb_fwinfo {
669 	smb_header_t smbfwii_hdr;	/* structure handle */
670 	uint8_t smbfwii_name;		/* Firmware component name */
671 	uint8_t smbfwii_vers;		/* Firmware version */
672 	uint8_t smbfwii_vers_fmt;	/* Version format */
673 	uint8_t smbfwii_id;		/* Firmware ID */
674 	uint8_t smbfwii_id_fmt;		/* Firmware ID format */
675 	uint8_t smbfwii_reldate;	/* Release Date */
676 	uint8_t smbfwii_mfg;		/* Manufacturer */
677 	uint8_t smbfwii_lsv;		/* Lowest supported version */
678 	uint64_t smbfwii_imgsz;		/* Image size */
679 	uint16_t smbfwii_chars;		/* Characteristics */
680 	uint8_t smbfwii_state;		/* State */
681 	uint8_t smbfwii_ncomps;		/* Number of associated components */
682 	uint16_t smbfwii_comps[];	/* Variable handles */
683 } smb_fwinfo_t;
684 
685 /*
686  * SMBIOS implementation structure for SMBIOS_TYPE_STRPROP.
687  */
688 typedef struct smb_strprop {
689 	smb_header_t smbstrp_hdr;	/* structure handle */
690 	uint16_t smbstrp_prop_id;	/* string property ID */
691 	uint8_t smbstrp_prop_val;	/* string property value */
692 	uint16_t smbstrp_phdl;		/* parent handle */
693 } smb_strprop_t;
694 
695 /*
696  * SMBIOS implementation structure for SUN_OEM_EXT_PROCESSOR.
697  */
698 typedef struct smb_processor_ext {
699 	smb_header_t smbpre_hdr;	/* structure header */
700 	uint16_t smbpre_processor;	/* processor handle */
701 	uint8_t smbpre_fru;		/* FRU indicator */
702 	uint8_t smbpre_n;		/* number of APIC IDs */
703 	uint16_t smbpre_apicid[1];	/* strand initial apic id */
704 } smb_processor_ext_t;
705 
706 /*
707  * SMBIOS implementation structure for SUN_OEM_EXT_PORT.
708  */
709 typedef struct smb_port_ext {
710 	smb_header_t smbpoe_hdr;	/* structure header */
711 	uint16_t smbpoe_chassis;	/* chassis handle */
712 	uint16_t smbpoe_port;		/* port connector handle */
713 	uint8_t smbpoe_dtype;		/* device type */
714 	uint16_t smbpoe_devhdl;		/* device handle */
715 	uint8_t smbpoe_phy;		/* PHY number */
716 } smb_port_ext_t;
717 
718 /*
719  * SMBIOS implementation structure for SUN_OEM_PCIEXRC.
720  */
721 typedef struct smb_pciexrc {
722 	smb_header_t smbpciexrc_hdr;	/* structure header */
723 	uint16_t smbpciexrc_bboard;	/* base board handle */
724 	uint16_t smbpciexrc_bdf;	/* PCI Bus/Dev/Func */
725 } smb_pciexrc_t;
726 
727 /*
728  * SMBIOS implementation structure for SUN_OEM_EXT_MEMARRAY.
729  */
730 typedef struct smb_memarray_ext {
731 	smb_header_t smbmarre_hdr;	/* structure header */
732 	uint16_t smbmarre_ma;		/* memory array handle */
733 	uint16_t smbmarre_component;	/* component parent handle */
734 	uint16_t smbmarre_bdf;		/* PCI bus/dev/funct */
735 } smb_memarray_ext_t;
736 
737 /*
738  * SMBIOS implementation structure for SUN_OEM_EXT_MEMDEVICE.
739  */
740 typedef struct smb_memdevice_ext {
741 	smb_header_t smbmdeve_hdr;	/* structure header */
742 	uint16_t smbmdeve_mdev;		/* memory device handle */
743 	uint8_t smbmdeve_dchan;		/* DRAM channel */
744 	uint8_t smbmdeve_ncs;		/* number of chip select */
745 	uint8_t smbmdeve_cs[1];		/* chip selects */
746 } smb_memdevice_ext_t;
747 
748 #pragma pack()
749 
750 typedef struct smb_struct {
751 	const smb_header_t *smbst_hdr;	/* address of raw structure data */
752 	const uchar_t *smbst_str;	/* address of string data (if any) */
753 	const uchar_t *smbst_end;	/* address of 0x0000 ending tag */
754 	struct smb_struct *smbst_next;	/* next structure in hash chain */
755 	uint16_t *smbst_strtab;		/* string index -> offset table */
756 	uint_t smbst_strtablen;		/* length of smbst_strtab */
757 } smb_struct_t;
758 
759 struct smbios_hdl {
760 	smbios_entry_point_t sh_ent_type; /* structure table entry point type */
761 	smbios_entry_t sh_ent;		/* structure table entry point */
762 	uint_t sh_ent_stnum;		/* number of structure table entries */
763 	const void *sh_buf;		/* structure table buffer */
764 	size_t sh_buflen;		/* size of structure table buffer */
765 	smb_struct_t *sh_structs;	/* array of structure descriptors */
766 	uint_t sh_nstructs;		/* number of active structures */
767 	smb_struct_t **sh_hash;		/* hash bucket array for descriptors */
768 	uint_t sh_hashlen;		/* hash bucket array length */
769 	int sh_err;			/* error code for smbios_errno() */
770 	int sh_libvers;			/* library client abi version */
771 	int sh_smbvers;			/* derived underlying format version */
772 	uint_t sh_flags;		/* miscellaneous flags (see below) */
773 };
774 
775 #define	SMB_FL_DEBUG	0x1		/* print debug messages for this hdl */
776 #define	SMB_FL_BUFALLOC	0x2		/* sh_buf was allocated by library */
777 #define	SMB_FL_TRUNC	0x4		/* smbios table is truncated */
778 
779 #define	SMB_BIOS_DEVICE		"/dev/xsvc"	/* device w/ BIOS physmem */
780 #define	SMB_SMBIOS_DEVICE	"/dev/smbios"	/* device w/ SMBIOS image */
781 
782 #define	SMB_RANGE_START	0xF0000		/* start of physical address range */
783 #define	SMB_RANGE_LIMIT	0xFFFFF		/* limit of physical address range */
784 #define	SMB_SCAN_STEP	16		/* stepping by paragraph */
785 
786 #define	SMB_MAJMIN(M, m)	((((M) & 0xFF) << 8) | ((m) & 0xFF))
787 #define	SMB_MAJOR(v)		(((v) & 0xFF00) >> 8)
788 #define	SMB_MINOR(v)		(((v) & 0x00FF))
789 
790 #define	ESMB_BASE	1000		/* base value for libsmbios errnos */
791 
792 enum {
793 	ESMB_NOTFOUND = ESMB_BASE,	/* SMBIOS table not found on system */
794 	ESMB_MAPDEV,			/* failed to map SMBIOS table */
795 	ESMB_NOENT,			/* failed to locate structure */
796 	ESMB_NOMEM,			/* failed to allocate memory */
797 	ESMB_NOHDR,			/* failed to read SMBIOS header */
798 	ESMB_NOSTAB,			/* failed to read SMBIOS struct table */
799 	ESMB_NOINFO,			/* no common info for structure */
800 	ESMB_SHORT,			/* buffer length doesn't match header */
801 	ESMB_CORRUPT,			/* buffer struct or len is corrupt */
802 	ESMB_VERSION,			/* version not supported by library */
803 	ESMB_NOTSUP,			/* feature not supported by provider */
804 	ESMB_HEADER,			/* SMBIOS header corrupt or invalid */
805 	ESMB_OLD,			/* SMBIOS version is too old for us */
806 	ESMB_NEW,			/* SMBIOS version is too new for us */
807 	ESMB_CKSUM,			/* SMBIOS header checksum mismatch */
808 	ESMB_INVAL,			/* invalid function call argument */
809 	ESMB_TYPE,			/* structure type mismatch */
810 	ESMB_UNKNOWN			/* unknown error (maximum value tag) */
811 };
812 
813 extern const smb_struct_t *smb_lookup_type(smbios_hdl_t *, uint_t);
814 extern const smb_struct_t *smb_lookup_id(smbios_hdl_t *, uint_t);
815 extern const char *smb_strptr(const smb_struct_t *, uint_t);
816 extern int smb_gteq(smbios_hdl_t *, int);
817 extern int smb_libgteq(smbios_hdl_t *, int);
818 
819 extern int smb_set_errno(smbios_hdl_t *, int);
820 extern smbios_hdl_t *smb_open_error(smbios_hdl_t *, int *, int);
821 extern const char *smb_strerror(int);
822 
823 extern void *smb_alloc(size_t);
824 extern void *smb_zalloc(size_t);
825 extern void smb_free(void *, size_t);
826 
827 extern void smb_dprintf(smbios_hdl_t *, const char *, ...);
828 
829 extern int _smb_debug;
830 
831 /*
832  * The following series of structures represent the base versions of public
833  * structures that are used inside by the smbios routines. This allows the
834  * common code to properly know how much it should or should not bzero and how
835  * to handle additions to the spec. Types should only be added here if we need
836  * to extend the public structures in sys/smbios.h due to a change in the spec.
837  *
838  * Types here have the name smb_base_%s which corresponds to smbios_%s.
839  */
840 typedef struct smb_base_chassis {
841 	uint32_t smbbc_oemdata;		/* OEM-specific data */
842 	uint8_t smbbc_lock;		/* lock present? */
843 	uint8_t smbbc_type;		/* type */
844 	uint8_t smbbc_bustate;		/* boot-up state */
845 	uint8_t smbbc_psstate;		/* power supply state */
846 	uint8_t smbbc_thstate;		/* thermal state */
847 	uint8_t smbbc_security;		/* security status */
848 	uint8_t smbbc_uheight;		/* enclosure height in U's */
849 	uint8_t smbbc_cords;		/* number of power cords */
850 	uint8_t smbbc_elems;		/* number of element records (n) */
851 	uint8_t smbbc_elemlen;		/* length of contained element (m) */
852 } smb_base_chassis_t;
853 
854 typedef struct smb_base_processor {
855 	uint64_t smbbp_cpuid;		/* processor cpuid information */
856 	uint32_t smbbp_family;		/* processor family */
857 	uint8_t smbbp_type;		/* processor type (SMB_PRT_*) */
858 	uint8_t smbbp_voltage;		/* voltage (SMB_PRV_*) */
859 	uint8_t smbbp_status;		/* status (SMB_PRS_*) */
860 	uint8_t smbbp_upgrade;		/* upgrade (SMB_PRU_*) */
861 	uint32_t smbbp_clkspeed;	/* external clock speed in MHz */
862 	uint32_t smbbp_maxspeed;	/* maximum speed in MHz */
863 	uint32_t smbbp_curspeed;	/* current speed in MHz */
864 	id_t smbbp_l1cache;		/* L1 cache handle */
865 	id_t smbbp_l2cache;		/* L2 cache handle */
866 	id_t smbbp_l3cache;		/* L3 cache handle */
867 } smb_base_processor_t;
868 
869 typedef struct smb_base_memdevice {
870 	id_t smbbmd_array;		/* handle of physical memory array */
871 	id_t smbbmd_error;		/* handle of memory error data */
872 	uint32_t smbbmd_twidth;		/* total width in bits including ecc */
873 	uint32_t smbbmd_dwidth;		/* data width in bits */
874 	uint64_t smbbmd_size;		/* size in bytes (see note above) */
875 	uint8_t smbbmd_form;		/* form factor */
876 	uint8_t smbbmd_set;		/* set (0x00=none, 0xFF=unknown) */
877 	uint8_t smbbmd_type;		/* memory type */
878 	uint8_t smbbmd_pad;		/* padding */
879 	uint32_t smbbmd_flags;		/* flags (see below) */
880 	uint32_t smbbmd_speed;		/* speed in MHz */
881 	const char *smbbmd_dloc;	/* physical device locator string */
882 	const char *smbbmd_bloc;	/* physical bank locator string */
883 	uint8_t smbbmd_rank;		/* rank */
884 } smb_base_memdevice_t;
885 
886 typedef struct smb_base_bios {
887 	const char *smbbb_vendor;	/* bios vendor string */
888 	const char *smbbb_version;	/* bios version string */
889 	const char *smbbb_reldate;	/* bios release date */
890 	uint32_t smbbb_segment;		/* bios address segment location */
891 	uint32_t smbbb_romsize;		/* bios rom size in bytes */
892 	uint32_t smbbb_runsize;		/* bios image size in bytes */
893 	uint64_t smbbb_cflags;		/* bios characteristics */
894 	const uint8_t *smbbb_xcflags;	/* bios characteristics extensions */
895 	size_t smbbb_nxcflags;		/* number of smbb_xcflags[] bytes */
896 	smbios_version_t smbbb_biosv;	/* bios version */
897 	smbios_version_t smbbb_ecfwv;	/* bios embedded ctrl f/w version */
898 } smb_base_bios_t;
899 
900 typedef struct smb_base_cache {
901 	uint32_t smbba_maxsize;		/* maximum installed size in bytes */
902 	uint32_t smbba_size;		/* installed size in bytes */
903 	uint16_t smbba_stype;		/* supported SRAM types (SMB_CAT_*) */
904 	uint16_t smbba_ctype;		/* current SRAM type (SMB_CAT_*) */
905 	uint8_t smbba_speed;		/* speed in nanoseconds */
906 	uint8_t smbba_etype;		/* error correction type (SMB_CAE_*) */
907 	uint8_t smbba_ltype;		/* logical cache type (SMB_CAG_*) */
908 	uint8_t smbba_assoc;		/* associativity (SMB_CAA_*) */
909 	uint8_t smbba_level;		/* cache level */
910 	uint8_t smbba_mode;		/* cache mode (SMB_CAM_*) */
911 	uint8_t smbba_location;		/* cache location (SMB_CAL_*) */
912 	uint8_t smbba_flags;		/* cache flags (SMB_CAF_*) */
913 } smb_base_cache_t;
914 
915 typedef struct smb_base_slot {
916 	const char *smbbl_name;		/* reference designation */
917 	uint8_t smbbl_type;		/* slot type */
918 	uint8_t smbbl_width;		/* slot data bus width */
919 	uint8_t smbbl_usage;		/* current usage */
920 	uint8_t smbbl_length;		/* slot length */
921 	uint16_t smbbl_id;		/* slot ID */
922 	uint8_t smbbl_ch1;		/* slot characteristics 1 */
923 	uint8_t smbbl_ch2;		/* slot characteristics 2 */
924 	uint16_t smbbl_sg;		/* segment group number */
925 	uint8_t smbbl_bus;		/* bus number */
926 	uint8_t smbbl_df;		/* device/function number */
927 } smb_base_slot_t;
928 
929 /*
930  * Prior to reivison 3.5 of the library and interface we had embedded a 256 byte
931  * string for the SKU into here rather than pointing to constant data. This,
932  * combined withe bugs in the implementation, generally led to strings with
933  * garbage. As part of fixing this with the 3.5 support, we moved the struct to
934  * ve more inline with everything else.
935  */
936 typedef struct smb_chassis_pre35 {
937 	uint32_t smbc_oemdata;		/* OEM-specific data */
938 	uint8_t smbc_lock;		/* lock present? */
939 	uint8_t smbc_type;		/* type */
940 	uint8_t smbc_bustate;		/* boot-up state */
941 	uint8_t smbc_psstate;		/* power supply state */
942 	uint8_t smbc_thstate;		/* thermal state */
943 	uint8_t smbc_security;		/* security status */
944 	uint8_t smbc_uheight;		/* enclosure height in U's */
945 	uint8_t smbc_cords;		/* number of power cords */
946 	uint8_t smbc_elems;		/* number of element records (n) */
947 	uint8_t smbc_elemlen;		/* length of contained element (m) */
948 	char smbc_sku[256];
949 } smb_chassis_pre35_t;
950 
951 #ifdef	__cplusplus
952 }
953 #endif
954 
955 #endif	/* _SYS_SMBIOS_IMPL_H */
956